[root@localhost ~]# dmesg [ 0.000000] Reserving virtual address space above 0xfdc00000 [ 0.000000] Linux version 2.6.32.43-0.4.1.xs1.8.0.835.170778xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed May 29 18:06:30 EDT 2013 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 3.886977] Xen-provided machine memory map: [ 3.886979] BIOS: 0000000000000000 - 000000000009d800 (usable) [ 3.886981] BIOS: 000000000009d800 - 00000000000a0000 (reserved) [ 3.886982] BIOS: 00000000000e0000 - 0000000000100000 (reserved) [ 3.886984] BIOS: 0000000000100000 - 00000000b857f000 (usable) [ 3.886985] BIOS: 00000000b857f000 - 00000000b8586000 (ACPI NVS) [ 3.886986] BIOS: 00000000b8586000 - 00000000cb8dc000 (usable) [ 3.886987] BIOS: 00000000cb8dc000 - 00000000cbae4000 (reserved) [ 3.886989] BIOS: 00000000cbae4000 - 00000000cbaf9000 (ACPI data) [ 3.886990] BIOS: 00000000cbaf9000 - 00000000cbc66000 (ACPI NVS) [ 3.886991] BIOS: 00000000cbc66000 - 00000000cbfff000 (reserved) [ 3.886992] BIOS: 00000000cbfff000 - 00000000cc000000 (usable) [ 3.886994] BIOS: 00000000d7000000 - 00000000df200000 (reserved) [ 3.886995] BIOS: 00000000f8000000 - 00000000fc000000 (reserved) [ 3.886996] BIOS: 00000000fec00000 - 00000000fec01000 (reserved) [ 3.886997] BIOS: 00000000fed00000 - 00000000fed04000 (reserved) [ 3.886998] BIOS: 00000000fed1c000 - 00000000fed20000 (reserved) [ 3.887000] BIOS: 00000000fee00000 - 00000000fee01000 (reserved) [ 3.887001] BIOS: 00000000ff000000 - 0000000100000000 (reserved) [ 3.887002] BIOS: 0000000100000000 - 000000081fe00000 (usable) [ 3.887003] Xen-provided physical RAM map: [ 3.887004] Xen: 0000000000000000 - 000000002f800000 (usable) [ 3.887021] DMI 2.7 present. [ 3.887331] last_pfn = 0x2f800 max_arch_pfn = 0x10000000 [ 3.887332] initial memory mapped : 0 - 00000000 [ 3.887334] init_memory_mapping: 0000000000000000-000000002f800000 [ 3.887337] NX (Execute Disable) protection: active [ 3.887339] 0000000000 - 002f800000 page 4k [ 3.887565] kernel direct mapping tables up to 2f800000 @ 1040000-11c1000 [ 4.119725] RAMDISK: 00787000 - 00f70200 [ 4.121445] ACPI: RSDP 000f0490 00024 (v02 INTEL) [ 4.121450] ACPI: XSDT cbae8078 00074 (v01 INTEL DH87MC 0000002F AMI 00010013) [ 4.121455] ACPI: FACP cbaf3ef0 0010C (v05 INTEL DH87MC 0000002F AMI 00010013) [ 4.121459] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 (20090903/tbfadt-288) [ 4.121463] ACPI: DSDT cbae8180 0BD6E (v02 INTEL DH87MC 0000002F INTL 20091112) [ 4.121466] ACPI: FACS cbc64080 00040 [ 4.121469] ACPI: APIC cbaf4000 00072 (v03 INTEL DH87MC 0000002F AMI 00010013) [ 4.121472] ACPI: FPDT cbaf4078 00044 (v01 INTEL DH87MC 0000002F AMI 00010013) [ 4.121475] ACPI: SSDT cbaf40c0 00539 (v01 INTEL DH87MC 0000002F INTL 20051117) [ 4.121477] ACPI: SSDT cbaf4600 00AD8 (v01 INTEL DH87MC 0000002F INTL 20051117) [ 4.121480] ACPI: MCFG cbaf50d8 0003C (v01 INTEL DH87MC 0000002F MSFT 00000097) [ 4.121483] ACPI: HPET cbaf5118 00038 (v01 INTEL DH87MC 0000002F AMI. 00000005) [ 4.121486] ACPI: SSDT cbaf5150 0036D (v01 INTEL DH87MC 0000002F INTL 20091112) [ 4.121489] ACPI: SSDT cbaf54c0 02EDB (v01 INTEL DH87MC 0000002F INTL 20091112) [ 4.121492] ACPI: XMAR cbaf83a0 000B8 (v01 INTEL DH87MC 0000002F INTL 00000001) [ 4.121505] 0MB HIGHMEM available. [ 4.121506] 760MB LOWMEM available. [ 4.121507] mapped low ram: 0 - 2f800000 [ 4.121508] low ram: 0 - 2f800000 [ 4.121511] node 0 low ram: 00000000 - 2f000000 [ 4.121512] node 0 bootmap 00000000 - 00005e00 [ 4.122600] (5 early reservations) ==> bootmem [0000000000 - 002f000000] [ 4.122601] #0 [0000100000 - 0000766414] TEXT DATA BSS ==> [0000100000 - 0000766414] [ 4.122613] #1 [0000787000 - 0001040000] Xen provided ==> [0000787000 - 0001040000] [ 4.122627] #2 [0000767000 - 00007671c5] BRK ==> [0000767000 - 00007671c5] [ 4.122628] #3 [0001040000 - 00011b4000] PGTABLE ==> [0001040000 - 00011b4000] [ 4.122632] #4 [0000000000 - 0000006000] BOOTMAP ==> [0000000000 - 0000006000] [ 4.122640] found SMP MP-table at [fdbf8740] 000fd740 [ 4.126292] Zone PFN ranges: [ 4.126293] DMA 0x00000000 -> 0x00001000 [ 4.126294] Normal 0x00001000 -> 0x0002f800 [ 4.126295] HighMem 0x0002f800 -> 0x0002f800 [ 4.126296] Movable zone start PFN for each node [ 4.126297] early_node_map[2] active PFN ranges [ 4.126298] 0: 0x00000000 -> 0x0002f000 [ 4.126298] 0: 0x0002f800 -> 0x0002f800 [ 4.126300] On node 0 totalpages: 192512 [ 4.126565] free_area_init_node: node 0, pgdat c05cee80, node_mem_map c11b6000 [ 4.126567] DMA zone: 32 pages used for memmap [ 4.126568] DMA zone: 0 pages reserved [ 4.126569] DMA zone: 4064 pages, LIFO batch:0 [ 4.126617] Normal zone: 1488 pages used for memmap [ 4.126619] Normal zone: 186928 pages, LIFO batch:31 [ 4.128804] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 4.128805] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 4.128806] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 4.128807] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 4.128810] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 4.128813] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 4.128818] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 4.128821] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 4.128822] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 4.128824] ACPI: IRQ0 used by override. [ 4.128825] ACPI: IRQ2 used by override. [ 4.128826] ACPI: IRQ9 used by override. [ 4.128830] Using ACPI (MADT) for SMP configuration information [ 4.128845] Allocating PCI resources starting at df200000 (gap: df200000:18e00000) [ 4.128847] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 4.128866] PERCPU: Embedded 10 pages/cpu @c1868000 s18456 r0 d22504 u65536 [ 4.128869] pcpu-alloc: s18456 r0 d22504 u65536 alloc=16*4096 [ 4.128870] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 4.128881] Swapping MFNs for PFN 639 and 186a (MFN b9639 and 808795) [ 4.128894] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190992 [ 4.128896] Kernel command line: root=LABEL=root-logtaqlb ro console=tty0 xencons=hvc console=hvc0 [ 4.128913] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 4.128937] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 4.129036] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 4.129217] Enabling fast FPU save and restore... done. [ 4.129220] Enabling unmasked SIMD FPU exception support... done. [ 4.129223] Initializing CPU#0 [ 4.150637] Software IO TLB enabled: [ 4.150638] Aperture: 64 megabytes [ 4.150638] Address size: 28 bits [ 4.150638] Kernel range: c1962000 - c5962000 [ 4.150639] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.150641] PCI-DMA: mask is set to 37 bits [ 4.153027] Initializing HighMem for node 0 (00000000:00000000) [ 4.153029] Memory: 679608k/778240k available (2935k kernel code, 90012k reserved, 2030k data, 392k init, 0k highmem) [ 4.153032] virtual kernel memory layout: [ 4.153033] fixmap : 0xfd877000 - 0xfdbff000 (3616 kB) [ 4.153033] pkmap : 0xfd400000 - 0xfd600000 (2048 kB) [ 4.153034] vmalloc : 0xf0000000 - 0xfd3fe000 ( 211 MB) [ 4.153034] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 4.153035] .init : 0xc05da000 - 0xc063c000 ( 392 kB) [ 4.153035] .data : 0xc03ddc79 - 0xc05d95fc (2030 kB) [ 4.153036] .text : 0xc0100000 - 0xc03ddc79 (2935 kB) [ 4.153037] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 4.153083] Hierarchical RCU implementation. [ 4.153086] NR_IRQS:5376 [ 4.153564] Extended CMOS year: 2000 [ 4.153566] Xen reported: 3392.246 MHz processor. [ 4.155016] Console: colour VGA+ 80x25 [ 4.163658] console [tty0] enabled [ 4.173441] console [hvc0] enabled [ 4.298919] Calibrating delay using timer specific routine.. 6819.24 BogoMIPS (lpj=34096222) [ 4.299060] pid_max: default: 32768 minimum: 301 [ 4.299155] Mount-cache hash table entries: 512 [ 4.299292] mce: CPU supports 9 MCE banks [ 4.299383] Checking 'hlt' instruction... OK. [ 4.299798] SMP alternatives: switching to UP code [ 4.314046] ACPI: Core revision 20090903 [ 4.328131] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 4.328205] ftrace: allocating 13078 entries in 26 pages [ 4.331244] SMP alternatives: switching to SMP code [ 4.345359] Initializing CPU#1 [ 4.345402] Initializing CPU#2 [ 4.345438] Brought up 4 CPUs [ 4.345441] Initializing CPU#3 [ 4.427837] Grant table version 2 [ 4.427949] NET: Registered protocol family 16 [ 4.428286] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.428376] ACPI: bus type pci registered [ 4.428469] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 4.428545] PCI: MCFG area at f8000000 reserved in E820 [ 4.428615] PCI: Using MMCONFIG for extended config space [ 4.428687] PCI: Using configuration type 1 for base access [ 4.430194] bio: create slab at 0 [ 4.431141] ACPI: EC: Look up EC in DSDT [ 4.433028] ACPI: Executed 1 blocks of module-level executable AML code [ 4.434934] ACPI: BIOS _OSI(Linux) query ignored [ 4.436410] ACPI: Interpreter enabled [ 4.436479] ACPI: (supports S0 S5) [ 4.436652] ACPI: Using IOAPIC for interrupt routing [ 4.443922] ACPI: Power Resource [FN00] (off) [ 4.444001] ACPI: Power Resource [FN01] (off) [ 4.444079] ACPI: Power Resource [FN02] (off) [ 4.444156] ACPI: Power Resource [FN03] (off) [ 4.444233] ACPI: Power Resource [FN04] (off) [ 4.444700] ACPI: No dock devices found. [ 4.444773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.445207] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 4.445955] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 4.446030] pci 0000:00:01.0: PME# disabled [ 4.446156] pci 0000:00:02.0: reg 10 64bit mmio: [0xf7800000-0xf7bfffff] [ 4.446166] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff] [ 4.446171] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f] [ 4.446283] pci 0000:00:14.0: reg 10 64bit mmio: [0xf7e20000-0xf7e2ffff] [ 4.446338] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 4.446416] pci 0000:00:14.0: PME# disabled [ 4.446584] pci 0000:00:16.0: reg 10 64bit mmio: [0xf7e3b000-0xf7e3b00f] [ 4.446643] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 4.446718] pci 0000:00:16.0: PME# disabled [ 4.446857] pci 0000:00:19.0: reg 10 32bit mmio: [0xf7e00000-0xf7e1ffff] [ 4.446864] pci 0000:00:19.0: reg 14 32bit mmio: [0xf7e39000-0xf7e39fff] [ 4.446871] pci 0000:00:19.0: reg 18 io port: [0xf080-0xf09f] [ 4.446927] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 4.447002] pci 0000:00:19.0: PME# disabled [ 4.447136] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7e38000-0xf7e383ff] [ 4.447212] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 4.447289] pci 0000:00:1a.0: PME# disabled [ 4.447413] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7e30000-0xf7e33fff] [ 4.447473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 4.447548] pci 0000:00:1b.0: PME# disabled [ 4.447709] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.447784] pci 0000:00:1c.0: PME# disabled [ 4.447944] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 4.448019] pci 0000:00:1c.2: PME# disabled [ 4.448164] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7e37000-0xf7e373ff] [ 4.448239] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 4.448315] pci 0000:00:1d.0: PME# disabled [ 4.448562] pci 0000:00:1f.2: reg 10 io port: [0xf0d0-0xf0d7] [ 4.448569] pci 0000:00:1f.2: reg 14 io port: [0xf0c0-0xf0c3] [ 4.448575] pci 0000:00:1f.2: reg 18 io port: [0xf0b0-0xf0b7] [ 4.448582] pci 0000:00:1f.2: reg 1c io port: [0xf0a0-0xf0a3] [ 4.448588] pci 0000:00:1f.2: reg 20 io port: [0xf060-0xf07f] [ 4.448595] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7e36000-0xf7e367ff] [ 4.448674] pci 0000:00:1f.2: PME# supported from D3hot [ 4.448748] pci 0000:00:1f.2: PME# disabled [ 4.448851] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7e35000-0xf7e350ff] [ 4.448870] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f] [ 4.448937] pci 0000:01:00.0: reg 10 32bit mmio: [0xf7d10000-0xf7d11fff] [ 4.448973] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7d00000-0xf7d0ffff] [ 4.449004] pci 0000:01:00.0: supports D1 [ 4.449047] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 4.449122] pci 0000:00:01.0: bridge 32bit mmio: [0xf7d00000-0xf7dfffff] [ 4.449284] pci 0000:02:00.0: supports D1 D2 [ 4.449285] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.449363] pci 0000:02:00.0: PME# disabled [ 4.449490] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 4.449564] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff] [ 4.449627] pci 0000:03:02.0: reg 10 io port: [0xe050-0xe057] [ 4.449639] pci 0000:03:02.0: reg 14 io port: [0xe040-0xe047] [ 4.449652] pci 0000:03:02.0: reg 18 io port: [0xe030-0xe037] [ 4.449664] pci 0000:03:02.0: reg 1c io port: [0xe020-0xe027] [ 4.449676] pci 0000:03:02.0: reg 20 io port: [0xe010-0xe017] [ 4.449689] pci 0000:03:02.0: reg 24 io port: [0xe000-0xe00f] [ 4.449807] pci 0000:02:00.0: PCI bridge to [bus 03-03] (subtractive decode) [ 4.449891] pci 0000:02:00.0: bridge io port: [0xe000-0xefff] [ 4.449908] pci 0000:02:00.0: bridge window [0xe000-0xefff] (subtractive decode) [ 4.449909] pci 0000:02:00.0: bridge window [0x0-0x0] (subtractive decode) [ 4.449910] pci 0000:02:00.0: bridge window [0x0-0x0] (subtractive decode) [ 4.449911] pci 0000:02:00.0: bridge window [0x0-0x0] (subtractive decode) [ 4.450003] pci 0000:04:00.0: reg 10 32bit mmio: [0xf7cc0000-0xf7cdffff] [ 4.450016] pci 0000:04:00.0: reg 14 32bit mmio: [0xf7c00000-0xf7c7ffff] [ 4.450028] pci 0000:04:00.0: reg 18 io port: [0xd000-0xd01f] [ 4.450041] pci 0000:04:00.0: reg 1c 32bit mmio: [0xf7ce0000-0xf7ce3fff] [ 4.450076] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf7c80000-0xf7cbffff] [ 4.450141] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 4.450219] pci 0000:04:00.0: PME# disabled [ 4.450367] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 4.450440] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 4.450444] pci 0000:00:1c.2: bridge 32bit mmio: [0xf7c00000-0xf7cfffff] [ 4.450468] pci_bus 0000:00: on NUMA node 0 [ 4.450470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.450528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 4.450551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 4.450570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 4.450597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 4.454249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 4.454900] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 4.455702] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 4.456356] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 4.457005] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 4.457693] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 4.458462] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 4.459110] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 4.459854] xen_mem: Initialising balloon driver. [ 4.460070] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 4.460163] vgaarb: loaded [ 4.460327] PCI: Using ACPI for IRQ routing [ 4.460566] Switching to clocksource xen [ 4.461400] pnp: PnP ACPI init [ 4.461475] ACPI: bus type pnp registered [ 4.463957] pnp: PnP ACPI: found 15 devices [ 4.464028] ACPI: ACPI bus type pnp unregistered [ 4.464104] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 4.464182] system 00:06: ioport range 0x680-0x69f has been reserved [ 4.464256] system 00:06: ioport range 0xffff-0xffff has been reserved [ 4.464329] system 00:06: ioport range 0xffff-0xffff has been reserved [ 4.464401] system 00:06: ioport range 0xffff-0xffff has been reserved [ 4.464475] system 00:06: ioport range 0x1c00-0x1cfe has been reserved [ 4.465082] system 00:06: ioport range 0x1d00-0x1dfe has been reserved [ 4.465155] system 00:06: ioport range 0x1e00-0x1efe has been reserved [ 4.465229] system 00:06: ioport range 0x1f00-0x1ffe has been reserved [ 4.465303] system 00:06: ioport range 0x1800-0x18fe has been reserved [ 4.465376] system 00:06: ioport range 0x164e-0x164f has been reserved [ 4.465450] system 00:08: ioport range 0x1854-0x1857 has been reserved [ 4.465526] system 00:09: ioport range 0xa00-0xa1f has been reserved [ 4.465600] system 00:09: ioport range 0xa20-0xa3f has been reserved [ 4.465676] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved [ 4.465750] system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 4.465861] system 00:0e: iomem range 0xfed10000-0xfed17fff has been reserved [ 4.465935] system 00:0e: iomem range 0xfed18000-0xfed18fff has been reserved [ 4.466009] system 00:0e: iomem range 0xfed19000-0xfed19fff has been reserved [ 4.466084] system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved [ 4.466158] system 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved [ 4.466231] system 00:0e: iomem range 0xfed90000-0xfed93fff has been reserved [ 4.466306] system 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved [ 4.466380] system 00:0e: iomem range 0xff000000-0xffffffff has been reserved [ 4.466454] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 4.466541] system 00:0e: iomem range 0xf7fef000-0xf7feffff has been reserved [ 4.466616] system 00:0e: iomem range 0xf7ff0000-0xf7ff0fff has been reserved [ 4.467142] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 4.467216] pci 0000:00:01.0: IO window: disabled [ 4.467291] pci 0000:00:01.0: MEM window: 0xf7d00000-0xf7dfffff [ 4.467365] pci 0000:00:01.0: PREFETCH window: disabled [ 4.467440] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 4.467515] pci 0000:02:00.0: IO window: 0xe000-0xefff [ 4.467595] pci 0000:02:00.0: MEM window: disabled [ 4.467670] pci 0000:02:00.0: PREFETCH window: disabled [ 4.467752] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 4.467825] pci 0000:00:1c.0: IO window: 0xe000-0xefff [ 4.467902] pci 0000:00:1c.0: MEM window: disabled [ 4.468011] pci 0000:00:1c.0: PREFETCH window: disabled [ 4.468088] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 4.468162] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 4.468237] pci 0000:00:1c.2: MEM window: 0xf7c00000-0xf7cfffff [ 4.468311] pci 0000:00:1c.2: PREFETCH window: disabled [ 4.468413] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.468490] pci 0000:00:01.0: setting latency timer to 64 [ 4.468499] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.468575] pci 0000:00:1c.0: setting latency timer to 64 [ 4.468588] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.468667] pci 0000:02:00.0: setting latency timer to 64 [ 4.468693] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.468770] pci 0000:00:1c.2: setting latency timer to 64 [ 4.468773] pci_bus 0000:00: resource 4 io: [0x00-0xcf7] [ 4.468774] pci_bus 0000:00: resource 5 io: [0xd00-0xffff] [ 4.468776] pci_bus 0000:00: resource 6 mem: [0x0a0000-0x0bffff] [ 4.468777] pci_bus 0000:00: resource 7 mem: [0x0d4000-0x0d7fff] [ 4.468778] pci_bus 0000:00: resource 8 mem: [0x0d8000-0x0dbfff] [ 4.468778] pci_bus 0000:00: resource 9 mem: [0x0dc000-0x0dffff] [ 4.468779] pci_bus 0000:00: resource 10 mem: [0x0e0000-0x0e3fff] [ 4.468780] pci_bus 0000:00: resource 11 mem: [0x0e4000-0x0e7fff] [ 4.468782] pci_bus 0000:00: resource 12 mem: [0xdf200000-0xfeafffff] [ 4.468783] pci_bus 0000:01: resource 1 mem: [0xf7d00000-0xf7dfffff] [ 4.468784] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 4.468785] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 4.468786] pci_bus 0000:03: resource 4 io: [0xe000-0xefff] [ 4.468787] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 4.468788] pci_bus 0000:04: resource 1 mem: [0xf7c00000-0xf7cfffff] [ 4.468822] NET: Registered protocol family 2 [ 4.468915] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 4.469057] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.469268] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 4.469398] TCP: Hash tables configured (established 131072 bind 65536) [ 4.469473] TCP reno registered [ 4.469579] NET: Registered protocol family 1 [ 4.469676] pci 0000:00:02.0: Boot video device [ 4.514610] Trying to unpack rootfs image as initramfs... [ 4.517847] Freeing initrd memory: 8100k freed [ 4.519616] MCE: bind virq for DOM0 logging [ 4.523285] VFS: Disk quotas dquot_6.5.2 [ 4.523364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.523496] msgmni has been set to 379 [ 4.523730] alg: No test for stdrng (krng) [ 4.523840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 4.523929] io scheduler noop registered [ 4.523999] io scheduler anticipatory registered [ 4.524070] io scheduler deadline registered [ 4.524153] io scheduler cfq registered (default) [ 4.524353] pcieport 0000:00:01.0: get owner: 7ff0 [ 4.524441] pcieport 0000:00:01.0: irq 1279 (279) for MSI/MSI-X [ 4.524449] pcieport 0000:00:01.0: setting latency timer to 64 [ 4.524629] pcieport 0000:00:1c.0: get owner: 7ff0 [ 4.524720] pcieport 0000:00:1c.0: irq 1278 (278) for MSI/MSI-X [ 4.524730] pcieport 0000:00:1c.0: setting latency timer to 64 [ 4.524882] pcieport 0000:00:1c.2: get owner: 7ff0 [ 4.524973] pcieport 0000:00:1c.2: irq 1277 (277) for MSI/MSI-X [ 4.524982] pcieport 0000:00:1c.2: setting latency timer to 64 [ 4.544605] floppy0: Unable to grab DMA2 for the floppy driver [ 7.564496] floppy0: no floppy controllers found [ 7.565633] brd: module loaded [ 7.574697] loop: module loaded [ 7.574824] Xen virtual console successfully installed as hvc0 [ 7.574934] Event-channel device installed. [ 7.575044] blktap_device_init: blktap device major 253 [ 7.575117] blktap_ring_init: blktap ring major: 253 [ 7.578818] netfront: Initialising virtual ethernet driver. [ 7.579073] Uniform Multi-Platform E-IDE driver [ 7.579562] PNP: No PS/2 controller found. Probing ports directly. [ 7.824855] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.825038] mice: PS/2 mouse device common for all mice [ 7.825278] NET: Registered protocol family 17 [ 7.825471] registered taskstats version 1 [ 7.826002] PCI IO multiplexer device installed. [ 7.826082] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 7.826263] Freeing unused kernel memory: 392k freed [ 8.146851] usbcore: registered new interface driver usbfs [ 8.146969] usbcore: registered new interface driver hub [ 8.147070] usbcore: registered new device driver usb [ 8.148617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.148716] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.148802] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.148805] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 8.148884] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.149008] ehci_hcd 0000:00:1a.0: debug port 2 [ 8.152975] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 8.153172] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e38000 [ 8.174490] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 8.174641] usb usb1: configuration #1 chosen from 1 choice [ 8.174739] hub 1-0:1.0: USB hub found [ 8.174816] hub 1-0:1.0: 2 ports detected [ 8.174960] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.175046] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.175049] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 8.175124] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 8.175239] ehci_hcd 0000:00:1d.0: debug port 2 [ 8.179190] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 8.179361] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 8.194473] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 8.194616] usb usb2: configuration #1 chosen from 1 choice [ 8.194713] hub 2-0:1.0: USB hub found [ 8.194789] hub 2-0:1.0: 2 ports detected [ 8.196136] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.197428] uhci_hcd: USB Universal Host Controller Interface driver [ 8.231334] SCSI subsystem initialized [ 8.234919] arcmsr 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.235024] arcmsr 0000:01:00.0: setting latency timer to 64 [ 8.254518] Areca RAID Controller0: Model ARC-1212, F/W V1.51 2012-07-04 [ 8.254688] scsi0 : Areca SAS Host Adapter RAID Controller( RAID6 capable) [ 8.254688] v1.20.0X.15.130619 [ 8.254923] arcmsr 0000:01:00.0: get owner: 7ff0 [ 8.255021] arcmsr 0000:01:00.0: irq 1276 (276) for MSI/MSI-X [ 8.255028] IRQ 1276/arcmsr: IRQF_DISABLED is not guaranteed on shared IRQs [ 8.255278] arcmsr0: msi enabled [ 8.274633] scsi 0:0:0:0: Direct-Access Areca ARC-1212-VOL#000 R001 PQ: 0 ANSI: 5 [ 8.274844] sd 0:0:0:0: [sda] 39061504 512-byte logical blocks: (19.9 GB/18.6 GiB) [ 8.274973] scsi 0:0:0:1: Direct-Access Areca ARC-1212-VOL#001 R001 PQ: 0 ANSI: 5 [ 8.275121] sd 0:0:0:0: [sda] Write Protect is off [ 8.275192] sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08 [ 8.275259] sd 0:0:0:1: [sdb] 7773435904 512-byte logical blocks: (3.97 TB/3.61 TiB) [ 8.275283] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.275507] sda: detected capacity change from 0 to 19999490048 [ 8.275592] sda: [ 8.275654] sd 0:0:0:1: [sdb] Write Protect is off [ 8.275793] sd 0:0:0:1: [sdb] Mode Sense: cb 00 00 08 [ 8.275834] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.276006] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 8.276159] sdb: detected capacity change from 0 to 3979999182848 [ 8.276233] sdb: unknown partition table [ 8.284771] sda1 sda2 sda3 [ 8.285266] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.285267] sd 0:0:0:1: [sdb] Attached SCSI disk [ 8.288664] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 8.494474] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 8.644803] usb 1-1: configuration #1 chosen from 1 choice [ 8.645032] hub 1-1:1.0: USB hub found [ 8.645141] hub 1-1:1.0: 6 ports detected [ 8.764493] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 8.914915] usb 2-1: configuration #1 chosen from 1 choice [ 8.915146] hub 2-1:1.0: USB hub found [ 8.915258] hub 2-1:1.0: 8 ports detected [ 8.994635] usb 1-1.1: new full speed USB device using ehci_hcd and address 3 [ 9.105825] usb 1-1.1: configuration #1 chosen from 1 choice [ 9.182281] usb 1-1.2: new low speed USB device using ehci_hcd and address 4 [ 9.301559] usb 1-1.2: configuration #1 chosen from 1 choice [ 19.543871] EXT3-fs: INFO: recovery required on readonly filesystem. [ 19.543953] EXT3-fs: write access will be enabled during recovery. [ 20.703097] kjournald starting. Commit interval 15 seconds [ 20.703103] EXT3-fs: recovery complete. [ 20.717913] EXT3-fs: mounted filesystem with ordered data mode. [ 23.105239] input: PC Speaker as /class/input/input0 [ 23.152294] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-NAPI [ 23.152295] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 23.152355] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 23.152362] e1000e 0000:00:19.0: setting latency timer to 64 [ 23.152435] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 23.152483] e1000e 0000:00:19.0: get owner: 7ff0 [ 23.152512] e1000e 0000:00:19.0: irq 1275 (275) for MSI/MSI-X [ 23.161131] libata version 3.00 loaded. [ 23.263318] rtc_cmos 00:07: RTC can wake from S4 [ 23.263381] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 23.263436] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 23.273904] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 23.274025] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.274212] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 23.276733] parport_pc 00:0c: reported by Plug and Play ACPI [ 23.276795] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 23.330406] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 7c:05:07:0e:a0:b2 [ 23.330408] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 23.330444] e1000e 0000:00:19.0: eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 23.330474] e1000e 0000:04:00.0: Disabling ASPM L0s L1 [ 23.330477] ahci 0000:00:1f.2: version 3.0 [ 23.330535] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 23.330622] ahci 0000:00:1f.2: get owner: 7ff0 [ 23.330658] ahci 0000:00:1f.2: irq 1274 (274) for MSI/MSI-X [ 23.330702] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 23.330712] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x2 impl SATA mode [ 23.330714] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 23.330724] ahci 0000:00:1f.2: setting latency timer to 64 [ 23.330748] e1000e 0000:04:00.0: setting latency timer to 64 [ 23.330887] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 23.331012] e1000e 0000:04:00.0: get owner: 7ff0 [ 23.331119] e1000e 0000:04:00.0: irq 1273 (273) for MSI/MSI-X [ 23.331120] e1000e 0000:04:00.0: get owner: 7ff0 [ 23.331217] e1000e 0000:04:00.0: irq 1272 (272) for MSI/MSI-X [ 23.331219] e1000e 0000:04:00.0: get owner: 7ff0 [ 23.331316] e1000e 0000:04:00.0: irq 1271 (271) for MSI/MSI-X [ 23.356728] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 23.356991] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 23.357303] scsi1 : ahci [ 23.360806] ACPI: SSDT cbad9c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 23.361621] ACPI: SSDT cbad9618 005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 23.361913] ACPI: SSDT cbad8d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 23.368734] scsi2 : ahci [ 23.379227] thermal LNXTHERM:01: registered as thermal_zone0 [ 23.379233] ACPI: Thermal Zone [TZ00] (28 C) [ 23.379371] thermal LNXTHERM:02: registered as thermal_zone1 [ 23.379376] ACPI: Thermal Zone [TZ01] (30 C) [ 23.386146] scsi3 : ahci [ 23.386812] input: Power Button as /class/input/input1 [ 23.386821] ACPI: Power Button [PWRB] [ 23.386848] input: Power Button as /class/input/input2 [ 23.386849] ACPI: Power Button [PWRF] [ 23.412559] scsi4 : ahci [ 23.423034] scsi5 : ahci [ 23.423214] ata1: DUMMY [ 23.423216] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 1274 [ 23.423218] ata3: DUMMY [ 23.423218] ata4: DUMMY [ 23.423219] ata5: DUMMY [ 23.488122] e1000e 0000:04:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:09:f2:b0 [ 23.488124] e1000e 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 23.488136] e1000e 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007 [ 23.701429] serial 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 23.701750] 0000:03:02.0: ttyS2 at I/O 0xe040 (irq = 18) is a 16550A [ 23.712716] ACPI: Fan [FAN0] (off) [ 23.712739] ACPI: Fan [FAN1] (off) [ 23.712760] ACPI: Fan [FAN2] (off) [ 23.712782] ACPI: Fan [FAN3] (off) [ 23.712804] ACPI: Fan [FAN4] (off) [ 23.778912] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 23.780959] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 23.780962] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 23.780963] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 23.782563] ata2.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100 [ 23.784987] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 23.784989] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 23.784991] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 23.786603] ata2.00: configured for UDMA/100 [ 23.810591] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-5260S 1.00 PQ: 0 ANSI: 5 [ 24.080565] acpi device:53: registered as cooling_device13 [ 24.080619] input: Video Bus as /class/input/input3 [ 24.080622] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 24.091733] Too many connections [ 24.200236] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.200279] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 24.200321] scsi 0:0:16:0: Attached scsi generic sg2 type 3 [ 24.200354] scsi 2:0:0:0: Attached scsi generic sg3 type 5 [ 24.321204] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 24.321206] Uniform CD-ROM driver Revision: 3.20 [ 24.321291] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 24.600239] usbcore: registered new interface driver usbserial [ 24.600245] USB Serial support registered for generic [ 24.600260] usbcore: registered new interface driver usbserial_generic [ 24.600261] usbserial: USB Serial Driver core [ 24.624363] USB Serial support registered for FTDI USB Serial Device [ 24.624385] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected [ 24.624397] usb 1-1.1: Detected FT232BM [ 24.624398] usb 1-1.1: Number of endpoints 2 [ 24.624398] usb 1-1.1: Endpoint 1 MaxPacketSize 64 [ 24.624399] usb 1-1.1: Endpoint 2 MaxPacketSize 64 [ 24.624400] usb 1-1.1: Setting MaxPacketSize 64 [ 24.626957] ftdi_sio ttyUSB0: Unable to read latency timer: -32 [ 24.627027] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 24.627034] usbcore: registered new interface driver hiddev [ 24.627043] usbcore: registered new interface driver ftdi_sio [ 24.627044] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver [ 24.629412] input: LITEON Technology USB Multimedia Keyboard as /class/input/input4 [ 24.629462] generic-usb 0003:046D:C313.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.0-1.2/input0 [ 24.632066] input: LITEON Technology USB Multimedia Keyboard as /class/input/input5 [ 24.632112] generic-usb 0003:046D:C313.0002: input: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1a.0-1.2/input1 [ 24.632122] usbcore: registered new interface driver usbhid [ 24.632123] usbhid: v2.6:USB HID core driver [ 26.780806] Non-volatile memory driver v1.3 [ 26.814258] lp0: using parport0 (interrupt-driven). [ 27.181481] md: Autodetecting RAID arrays. [ 27.181487] md: Scanned 0 and added 0 devices. [ 27.181490] md: autorun ... [ 27.181492] md: ... autorun DONE. [ 27.592946] EXT3 FS on sda1, internal journal [ 27.693968] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 27.721014] ISO 9660 Extensions: RRIP_1991A [ 29.122667] Adding 524280k swap on /var/swap/swap.001. Priority:-1 extents:149 across:1024864k [ 30.060497] Microcode Update Driver: v2.00-xen , Peter Oruba [ 30.118808] Microcode Update Driver: v2.00-xen removed. [ 31.609507] openvswitch_mod: Open vSwitch switching datapath 1.4.6, built Jun 14 2013 09:23:22 [ 32.219454] ip_tables: (C) 2000-2006 Netfilter Core Team [ 33.242878] device xenbr1 entered promiscuous mode [ 33.394197] device eth1 entered promiscuous mode [ 34.541604] RPC: Registered udp transport module. [ 34.541606] RPC: Registered tcp transport module. [ 34.541607] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.475617] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 75.935592] warning: `ntpdate' uses 32-bit capabilities (legacy support in use) [ 80.400227] suspend: event channel 42 [ 86.244189] device xenbr0 entered promiscuous mode [ 86.354851] e1000e 0000:00:19.0: get owner: 7ff0 [ 86.354911] e1000e 0000:00:19.0: get owner: 7ff0 [ 86.354939] e1000e 0000:00:19.0: irq 1275 (275) for MSI/MSI-X [ 86.465037] e1000e 0000:00:19.0: get owner: 7ff0 [ 86.465098] e1000e 0000:00:19.0: get owner: 7ff0 [ 86.465126] e1000e 0000:00:19.0: irq 1275 (275) for MSI/MSI-X [ 86.469989] device eth0 entered promiscuous mode [ 89.976206] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None