[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v3] ARM: parse separate DT properties for different commandlines



Currently we use the chosen/bootargs property as the Xen commandline
and rely on xen,dom0-bootargs for Dom0. However this brings issues
with bootloaders, which usually build bootargs by bootscripts for a
Linux kernel - and not for the entirely different Xen hypervisor.

Introduce a new possible device tree property "xen,xen-bootargs"
explicitly for the Xen hypervisor and make the selection of which to
use more fine grained:
- If xen,xen-bootargs is present, it will be used for Xen.
- If xen,dom0-bootargs is present, it will be used for Dom0.
- If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is,
  bootargs will be used for Xen. Like the current situation.
- If no Xen specific properties are present, bootargs is for Dom0.
- If xen,xen-bootargs is present, but xen,dom0-bootargs is missing,
  bootargs will be used for Dom0.

The aim is to allow common bootscripts to boot both Xen and native
Linux with the same device tree blob. If needed, one could hard-code
the Xen commandline into the DTB, leaving bootargs for Dom0 to be set
by the (non Xen-aware) bootloader.

I will send out a appropriate u-boot patch, which writes the content
of the "xen_bootargs" environment variable into the xen,xen-bootargs
dtb property.

v1 .. v2:
 - fix whitespace issues
v2 .. v3:
 - add documentation

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx>
---
 docs/misc/arm/device-tree/booting.txt | 28 +++++++++++++++++++++++++++-
 xen/arch/arm/domain_build.c           | 15 +++++++++++----
 xen/common/device_tree.c              |  7 ++++++-
 3 files changed, 44 insertions(+), 6 deletions(-)

diff --git a/docs/misc/arm/device-tree/booting.txt 
b/docs/misc/arm/device-tree/booting.txt
index 94cd3f1..08ed775 100644
--- a/docs/misc/arm/device-tree/booting.txt
+++ b/docs/misc/arm/device-tree/booting.txt
@@ -1,3 +1,6 @@
+Dom0 kernel and ramdisk modules
+================================
+
 Xen is passed the dom0 kernel and initrd via a reference in the /chosen
 node of the device tree.
 
@@ -22,4 +25,27 @@ properties:
 
 - bootargs (optional)
 
-       Command line associated with this module
+       Command line associated with this module. This is deprecated and should
+       be replaced by the bootargs variations described below.
+
+
+Command lines
+=============
+
+Xen also checks for properties directly under /chosen to find suitable command
+lines for Xen and Dom0. The logic is the following:
+
+ - If xen,xen-bootargs is present, it will be used for Xen.
+ - If xen,dom0-bootargs is present, it will be used for Dom0.
+ - If xen,xen-bootargs is _not_ present, but xen,dom0-bootargs is,
+   bootargs will be used for Xen.
+ - If no Xen specific properties are present, bootargs is for Dom0.
+ - If xen,xen-bootargs is present, but xen,dom0-bootargs is missing,
+   bootargs will be used for Dom0.
+
+Most of these cases is to make booting with Xen-unaware bootloaders easier.
+For those you would hardcode the Xen commandline in the DTB under
+/chosen/xen,xen-bootargs and would let the bootloader set the Dom0 command
+line by writing bootargs (as for native Linux).
+A Xen-aware bootloader would set xen,xen-bootargs for Xen, xen,dom0-bootargs
+for Dom0 and bootargs for native Linux.
diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 01492bb..c82ece1 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -140,6 +140,7 @@ static int write_properties(struct domain *d, struct 
kernel_info *kinfo,
                             u32 address_cells, u32 size_cells)
 {
     const char *bootargs = NULL;
+    int had_dom0_bootargs = 0;
     int prop;
 
     if ( early_info.modules.nr_mods >= 1 &&
@@ -166,15 +167,21 @@ static int write_properties(struct domain *d, struct 
kernel_info *kinfo,
          *
          * * remember xen,dom0-bootargs if we don't already have
          *   bootargs (from module #1, above).
-         * * remove bootargs and xen,dom0-bootargs.
+         * * remove bootargs,  xen,dom0-bootargs and xen,xen-bootargs.
          */
         if ( device_tree_node_matches(fdt, node, "chosen") )
         {
-            if ( strcmp(prop_name, "bootargs") == 0 )
+            if ( strcmp(prop_name, "xen,xen-bootargs") == 0 )
+                continue;
+            if ( strcmp(prop_name, "xen,dom0-bootargs") == 0 )
+            {
+                had_dom0_bootargs = 1;
+                bootargs = prop_data;
                 continue;
-            else if ( strcmp(prop_name, "xen,dom0-bootargs") == 0 )
+            }
+            if ( strcmp(prop_name, "bootargs") == 0 )
             {
-                if ( !bootargs )
+                if ( !bootargs  && !had_dom0_bootargs )
                     bootargs = prop_data;
                 continue;
             }
diff --git a/xen/common/device_tree.c b/xen/common/device_tree.c
index 84d704d..e22bd22 100644
--- a/xen/common/device_tree.c
+++ b/xen/common/device_tree.c
@@ -325,7 +325,12 @@ const char *device_tree_bootargs(const void *fdt)
     if ( node < 0 )
         return NULL;
 
-    prop = fdt_get_property(fdt, node, "bootargs", NULL);
+    prop = fdt_get_property(fdt, node, "xen,xen-bootargs", NULL);
+    if ( prop == NULL )
+    {
+        if (fdt_get_property(fdt, node, "xen,dom0-bootargs", NULL))
+            prop = fdt_get_property(fdt, node, "bootargs", NULL);
+    }
     if ( prop == NULL )
         return NULL;
 
-- 
1.7.12.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.