|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v4 09/10] swiotlb-xen: support autotranslate guests
On Thu, Aug 15, 2013 at 12:10:53PM +0100, Stefano Stabellini wrote:
> Support autotranslate guests in swiotlb-xen by keeping track of the
> phys-to-bus and bus-to-phys mappings of the swiotlb buffer
> (xen_io_tlb_start-xen_io_tlb_end).
>
> Use a simple direct access on a pre-allocated array for phys-to-bus
> queries. Use a red-black tree for bus-to-phys queries.
>
> Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> Reviewed-by: David Vrabel <david.vrabel@xxxxxxxxxx>
>
>
> Changes in v4:
> - add err_out label in xen_dma_add_entry;
> - remove INVALID_ADDRESS, use DMA_ERROR_CODE instead;
> - code style fixes;
> - add in-code comments regarding the usage of xen_dma_seg[0].dma_addr.
>
> Changes in v3:
> - many code style and name changes;
> - improve error checks in xen_dma_add_entry.
> ---
> drivers/xen/swiotlb-xen.c | 172 ++++++++++++++++++++++++++++++++++++++++----
> 1 files changed, 156 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
> index b72f31c..8a403a0 100644
> --- a/drivers/xen/swiotlb-xen.c
> +++ b/drivers/xen/swiotlb-xen.c
> @@ -38,32 +38,148 @@
> #include <linux/bootmem.h>
> #include <linux/dma-mapping.h>
> #include <linux/export.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock_types.h>
> +#include <linux/rbtree.h>
> #include <xen/swiotlb-xen.h>
> #include <xen/page.h>
> #include <xen/xen-ops.h>
> #include <xen/hvc-console.h>
> +#include <xen/features.h>
> /*
> * Used to do a quick range check in swiotlb_tbl_unmap_single and
> * swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by
> this
> * API.
> */
>
> +#define NR_DMA_SEGS ((xen_io_tlb_nslabs + IO_TLB_SEGSIZE - 1) /
> IO_TLB_SEGSIZE)
> static char *xen_io_tlb_start, *xen_io_tlb_end;
> static unsigned long xen_io_tlb_nslabs;
> /*
> * Quick lookup value of the bus address of the IOTLB.
> */
>
> -static u64 start_dma_addr;
> +struct xen_dma_info {
> + dma_addr_t dma_addr;
> + phys_addr_t phys_addr;
> + size_t size;
> + struct rb_node rbnode;
> +};
> +
> +/*
> + * This array of struct xen_dma_info is indexed by physical addresses,
> + * starting from virt_to_phys(xen_io_tlb_start). Each entry maps
> + * (IO_TLB_SEGSIZE << IO_TLB_SHIFT) bytes, except the last one that is
> + * smaller. Getting the dma address corresponding to a given physical
> + * address can be done by direct access with the right index on the
> + * array.
> + */
> +static struct xen_dma_info *xen_dma_seg;
> +/*
> + * This tree keeps track of bus address to physical address
> + * mappings.
> + */
> +static struct rb_root bus_to_phys = RB_ROOT;
> +/* This lock protects operations on the bus_to_phys tree */
> +static DEFINE_SPINLOCK(xen_bus_to_phys_lock);
> +
> +static int xen_dma_add_entry(struct xen_dma_info *new)
> +{
> + struct rb_node **link = &bus_to_phys.rb_node;
> + struct rb_node *parent = NULL;
> + struct xen_dma_info *entry;
> + int rc = 0;
> +
> + spin_lock(&xen_bus_to_phys_lock);
> +
> + while (*link) {
> + parent = *link;
> + entry = rb_entry(parent, struct xen_dma_info, rbnode);
> +
> + if (new->dma_addr == entry->dma_addr) {
> + spin_unlock(&xen_bus_to_phys_lock);
> + pr_warn("%s: cannot add phys=0x%pa -> dma=0x%pa, the
> dma address is already present, mapping to 0x%pa\n",
> + __func__, &new->phys_addr,
> + &new->dma_addr, &entry->phys_addr);
> + rc = -EINVAL;
> + goto err_out;
> + }
> + if (new->phys_addr == entry->phys_addr) {
> + spin_unlock(&xen_bus_to_phys_lock);
> + pr_warn("%s: cannot add phys=0x%pa -> dma=0x%pa, the
> phys address is already present, mapping to 0x%pa\n",
> + __func__, &new->phys_addr,
> + &new->dma_addr, &entry->dma_addr);
> + rc = -EINVAL;
You didn't test this logic path, did you :-)
See the double spin_unlock?
I was thinking you could have the pr_warn in the err_out
label code.
> + goto err_out;
> + }
> +
> + if (new->dma_addr < entry->dma_addr)
> + link = &(*link)->rb_left;
> + else
> + link = &(*link)->rb_right;
> + }
> + rb_link_node(&new->rbnode, parent, link);
> + rb_insert_color(&new->rbnode, &bus_to_phys);
And here we just do
goto out;
> +
> +err_out:
while this is:
pr_warn("%s...")
rc = -EINVAL;
out:
> + spin_unlock(&xen_bus_to_phys_lock);
> + return rc;
> +}
And that should make those checks above just be:
if ((some conditional))
goto err_out;
right?
> +
> +static struct xen_dma_info *xen_get_dma_info(dma_addr_t dma_addr)
> +{
> + struct rb_node *n = bus_to_phys.rb_node;
> + struct xen_dma_info *entry;
> +
> + spin_lock(&xen_bus_to_phys_lock);
> +
> + while (n) {
> + entry = rb_entry(n, struct xen_dma_info, rbnode);
> + if (entry->dma_addr <= dma_addr &&
> + entry->dma_addr + entry->size > dma_addr) {
> + spin_unlock(&xen_bus_to_phys_lock);
> + return entry;
> + }
> + if (dma_addr < entry->dma_addr)
> + n = n->rb_left;
> + else
> + n = n->rb_right;
> + }
> +
> + spin_unlock(&xen_bus_to_phys_lock);
> + return NULL;
> +}
>
> static dma_addr_t xen_phys_to_bus(phys_addr_t paddr)
> {
> - return phys_to_machine(XPADDR(paddr)).maddr;
> + int nr_seg;
> + unsigned long offset;
> + char *vaddr;
> +
> + if (!xen_feature(XENFEAT_auto_translated_physmap))
> + return phys_to_machine(XPADDR(paddr)).maddr;
> +
> + vaddr = (char *)phys_to_virt(paddr);
> + if (vaddr >= xen_io_tlb_end || vaddr < xen_io_tlb_start)
> + return DMA_ERROR_CODE;
> +
> + offset = vaddr - xen_io_tlb_start;
> + nr_seg = offset / (IO_TLB_SEGSIZE << IO_TLB_SHIFT);
> +
> + return xen_dma_seg[nr_seg].dma_addr +
> + (paddr - xen_dma_seg[nr_seg].phys_addr);
> }
>
> static phys_addr_t xen_bus_to_phys(dma_addr_t baddr)
> {
> - return machine_to_phys(XMADDR(baddr)).paddr;
> + if (xen_feature(XENFEAT_auto_translated_physmap)) {
> + struct xen_dma_info *dma = xen_get_dma_info(baddr);
> + if (dma == NULL)
> + return DMA_ERROR_CODE;
> + else
> + return dma->phys_addr + (baddr - dma->dma_addr);
> + } else
> + return machine_to_phys(XMADDR(baddr)).paddr;
> }
>
> static dma_addr_t xen_virt_to_bus(void *address)
> @@ -107,6 +223,9 @@ static int is_xen_swiotlb_buffer(dma_addr_t dma_addr)
> unsigned long pfn = mfn_to_local_pfn(mfn);
> phys_addr_t paddr;
>
> + if (xen_feature(XENFEAT_auto_translated_physmap))
> + return 1;
> +
> /* If the address is outside our domain, it CAN
> * have the same virtual address as another address
> * in our domain. Therefore _only_ check address within our domain.
> @@ -124,13 +243,12 @@ static int max_dma_bits = 32;
> static int
> xen_swiotlb_fixup(void *buf, size_t size, unsigned long nslabs)
> {
> - int i, rc;
> + int i, j, rc;
> int dma_bits;
> - dma_addr_t dma_handle;
>
> dma_bits = get_order(IO_TLB_SEGSIZE << IO_TLB_SHIFT) + PAGE_SHIFT;
>
> - i = 0;
> + i = j = 0;
> do {
> int slabs = min(nslabs - i, (unsigned long)IO_TLB_SEGSIZE);
>
> @@ -138,12 +256,18 @@ xen_swiotlb_fixup(void *buf, size_t size, unsigned long
> nslabs)
> rc = xen_create_contiguous_region(
> (unsigned long)buf + (i << IO_TLB_SHIFT),
> get_order(slabs << IO_TLB_SHIFT),
> - dma_bits, &dma_handle);
> + dma_bits, &xen_dma_seg[j].dma_addr);
> } while (rc && dma_bits++ < max_dma_bits);
> if (rc)
> return rc;
>
> + xen_dma_seg[j].phys_addr = virt_to_phys(buf + (i <<
> IO_TLB_SHIFT));
> + xen_dma_seg[j].size = slabs << IO_TLB_SHIFT;
> + rc = xen_dma_add_entry(&xen_dma_seg[j]);
> + if (rc != 0)
> + return rc;
> i += slabs;
> + j++;
> } while (i < nslabs);
> return 0;
> }
> @@ -193,9 +317,10 @@ retry:
> /*
> * Get IO TLB memory from any location.
> */
> - if (early)
> + if (early) {
> xen_io_tlb_start = alloc_bootmem_pages(PAGE_ALIGN(bytes));
> - else {
> + xen_dma_seg = alloc_bootmem(sizeof(struct xen_dma_info) *
> NR_DMA_SEGS);
> + } else {
> #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
> #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
> while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
> @@ -210,6 +335,8 @@ retry:
> xen_io_tlb_nslabs = SLABS_PER_PAGE << order;
> bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
> }
> + xen_dma_seg = kzalloc(sizeof(struct xen_dma_info) * NR_DMA_SEGS,
> + GFP_KERNEL);
> }
> if (!xen_io_tlb_start) {
> m_ret = XEN_SWIOTLB_ENOMEM;
> @@ -232,7 +359,6 @@ retry:
> m_ret = XEN_SWIOTLB_EFIXUP;
> goto error;
> }
> - start_dma_addr = xen_virt_to_bus(xen_io_tlb_start);
> if (early) {
> if (swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs,
> verbose))
> @@ -290,7 +416,8 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t
> size,
>
> phys = virt_to_phys(ret);
> dev_addr = xen_phys_to_bus(phys);
> - if (((dev_addr + size - 1 <= dma_mask)) &&
> + if (!xen_feature(XENFEAT_auto_translated_physmap) &&
> + ((dev_addr + size - 1 <= dma_mask)) &&
> !range_straddles_page_boundary(phys, size))
> *dma_handle = dev_addr;
> else {
> @@ -321,8 +448,9 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t
> size, void *vaddr,
>
> phys = virt_to_phys(vaddr);
>
> - if (((dev_addr + size - 1 > dma_mask)) ||
> - range_straddles_page_boundary(phys, size))
> + if (xen_feature(XENFEAT_auto_translated_physmap) ||
> + (((dev_addr + size - 1 > dma_mask)) ||
> + range_straddles_page_boundary(phys, size)))
> xen_destroy_contiguous_region((unsigned long)vaddr, order);
>
> free_pages((unsigned long)vaddr, order);
> @@ -351,14 +479,19 @@ dma_addr_t xen_swiotlb_map_page(struct device *dev,
> struct page *page,
> * we can safely return the device addr and not worry about bounce
> * buffering it.
> */
> - if (dma_capable(dev, dev_addr, size) &&
> + if (!xen_feature(XENFEAT_auto_translated_physmap) &&
> + dma_capable(dev, dev_addr, size) &&
> !range_straddles_page_boundary(phys, size) && !swiotlb_force)
> return dev_addr;
>
> /*
> * Oh well, have to allocate and map a bounce buffer.
> + * Pass the dma_addr of the first slab in the iotlb buffer as
> + * argument so that swiotlb_tbl_map_single is free to allocate
> + * the bounce buffer anywhere appropriate in io_tlb_start -
> + * io_tlb_end.
> */
> - map = swiotlb_tbl_map_single(dev, start_dma_addr, phys, size, dir);
> + map = swiotlb_tbl_map_single(dev, xen_dma_seg[0].dma_addr, phys, size,
> dir);
> if (map == SWIOTLB_MAP_ERROR)
> return DMA_ERROR_CODE;
>
> @@ -494,10 +627,17 @@ xen_swiotlb_map_sg_attrs(struct device *hwdev, struct
> scatterlist *sgl,
> dma_addr_t dev_addr = xen_phys_to_bus(paddr);
>
> if (swiotlb_force ||
> + xen_feature(XENFEAT_auto_translated_physmap) ||
> !dma_capable(hwdev, dev_addr, sg->length) ||
> range_straddles_page_boundary(paddr, sg->length)) {
> + /*
> + * Pass the dma_addr of the first slab in the iotlb
> buffer as
> + * argument so that swiotlb_tbl_map_single is free to
> allocate
> + * the bounce buffer anywhere appropriate in
> io_tlb_start -
> + * io_tlb_end.
> + */
> phys_addr_t map = swiotlb_tbl_map_single(hwdev,
> - start_dma_addr,
> +
> xen_dma_seg[0].dma_addr,
> sg_phys(sg),
> sg->length,
> dir);
> --
Did you run any performance tests to see if adding the extra
spinlock (as the native SWIOTLB already has its own lock) and handling
of the tree is affecting it?
In the worst case when we do need to use the bounce buffer we end
up using two spinlocks.
Is there perhaps a better way? Could we eliminate the usage of the
spinlocks by doing some hashing and on the red-black trees having
a lock? And moving that in the SWIOTLB generic code? Similar to how
we do M2P or tmem does it? That would mean we could split up the
mega 64MB buffer in smaller chunks - as the code (swiotlb) already
assumes IO_TLB_SEGSIZE (128) slabs to allocate - which is 512kB
contingous memory (If memory serves right). Altering the underlaying
code from using an array to using an hash and from the hash
entries use the red-black trees. Or perhaps another array.
Obviously you still need to reference the dma to virtual address
lookup from the tree (as you have done here).
P.S.
I am also the SWIOTLB maintainer, so it is OK to modify the SWIOTLB
to be faster.
> 1.7.2.5
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |