[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH] PL011: don't force baud rate of 38400 bps

The PL011 driver currently sets the baudrate to a hardcoded value of
38400 bits/second. This will break Calxeda Midway, which uses 115200
Instead don't tinker with the baud rate register at all and rely on
the firmware or bootloader setting the correct value in here.
This works fine on Versatile Express and Calxeda Midway.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx>
 xen/drivers/char/pl011.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/xen/drivers/char/pl011.c b/xen/drivers/char/pl011.c
index 8e90520..0e1eb64 100644
--- a/xen/drivers/char/pl011.c
+++ b/xen/drivers/char/pl011.c
@@ -229,7 +229,7 @@ static int __init pl011_uart_init(struct dt_device_node 
     uart = &pl011_com;
     uart->clock_hz  = 0x16e3600;
-    uart->baud      = 38400;
+    uart->baud      = BAUD_AUTO;
     uart->data_bits = 8;
     uart->parity    = PARITY_NONE;
     uart->stop_bits = 1;

Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.