|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3 03/15] xen: arm: support for loading 64-bit zImage dom0
On 07/19/2013 12:44 PM, Ian Campbell wrote:
> This is defined in linux/Documentation/arm64/booting.txt.
>
> Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
> Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> ---
> xen/arch/arm/kernel.c | 80 +++++++++++++++++++++++++++++++++++++++++++++---
> 1 files changed, 75 insertions(+), 5 deletions(-)
>
> diff --git a/xen/arch/arm/kernel.c b/xen/arch/arm/kernel.c
> index 641b1f0..f6ff294 100644
> --- a/xen/arch/arm/kernel.c
> +++ b/xen/arch/arm/kernel.c
> @@ -27,6 +27,8 @@
>
> #define ZIMAGE32_MAGIC 0x016f2818
>
> +#define ZIMAGE64_MAGIC 0x14000008
> +
> struct minimal_dtb_header {
> uint32_t magic;
> uint32_t total_size;
> @@ -115,6 +117,57 @@ static void kernel_zimage_load(struct kernel_info *info)
> }
> }
>
> +#ifdef CONFIG_ARM_64
> +/*
> + * Check if the image is a 64-bit zImage and setup kernel_info
> + */
> +static int kernel_try_zimage64_prepare(struct kernel_info *info,
> + paddr_t addr, paddr_t size)
> +{
> + /* linux/Documentation/arm64/booting.txt */
> + struct {
> + uint32_t magic;
> + uint32_t res0;
> + uint64_t text_offset; /* Image load offset */
> + uint64_t res1;
> + uint64_t res2;
> + } zimage;
> + uint64_t start, end;
> +
> + if ( size < sizeof(zimage) )
> + return -EINVAL;
> +
> + copy_from_paddr(&zimage, addr, sizeof(zimage), DEV_SHARED);
> +
> + if (zimage.magic != ZIMAGE64_MAGIC)
> + return -EINVAL;
> +
> + /* Currently there is no length in the header, so just use the size */
> + start = 0;
> + end = size;
> +
> + /*
> + * Given the above this check is a bit pointless, but leave it
> + * here in case someone adds a length field in the future.
> + */
> + if ( (end - start) > size )
> + return -EINVAL;
> +
> + info->zimage.kernel_addr = addr;
> +
> + info->zimage.load_addr = info->mem.bank[0].start
> + + zimage.text_offset;
> + info->zimage.len = end - start;
> +
> + info->entry = info->zimage.load_addr;
> + info->load = kernel_zimage_load;
Could you fill check_overlap callback? For this purpose, you can reuse
kernel_zimage_check_overlap.
> + info->type = DOMAIN_PV64;
> +
> + return 0;
> +}
> +#endif
> +
> /*
> * Check if the image is a 32-bit zImage and setup kernel_info
> */
> @@ -170,6 +223,10 @@ static int kernel_try_zimage32_prepare(struct
> kernel_info *info,
> info->load = kernel_zimage_load;
> info->check_overlap = kernel_zimage_check_overlap;
>
> +#ifdef CONFIG_ARM_64
> + info->type = DOMAIN_PV32;
> +#endif
> +
> return 0;
> }
>
> @@ -208,6 +265,19 @@ static int kernel_try_elf_prepare(struct kernel_info
> *info,
> if ( (rc = elf_xen_parse(&info->elf.elf, &info->elf.parms)) != 0 )
> goto err;
>
> +#ifdef CONFIG_ARM_64
> + if ( elf_32bit(&info->elf.elf) )
> + info->type = DOMAIN_PV32;
> + else if ( elf_64bit(&info->elf.elf) )
> + info->type = DOMAIN_PV64;
> + else
> + {
> + printk("Unknown ELF class\n");
> + rc = -EINVAL;
> + goto err;
> + }
> +#endif
> +
> /*
> * TODO: can the ELF header be used to find the physical address
> * to load the image to? Instead of assuming virt == phys.
> @@ -254,13 +324,13 @@ int kernel_prepare(struct kernel_info *info)
> info->load_attr = BUFFERABLE;
> }
>
> - rc = kernel_try_zimage32_prepare(info, start, size);
> - if (rc < 0)
> - rc = kernel_try_elf_prepare(info, start, size);
> -
> #ifdef CONFIG_ARM_64
> - info->type = DOMAIN_PV32; /* No 64-bit guest support yet */
> + rc = kernel_try_zimage64_prepare(info, start, size);
> + if (rc < 0)
> #endif
> + rc = kernel_try_zimage32_prepare(info, start, size);
> + if (rc < 0)
> + rc = kernel_try_elf_prepare(info, start, size);
>
> return rc;
> }
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |