|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v4 2/8] hvmloader: Make the printfs more informative
On Fri, 21 Jun 2013, George Dunlap wrote:
> * Warn that you're relocating some BARs to 64-bit
>
> * Warn that you're relocating guest pages, and how many
>
> * Include upper 32-bits of the base register when printing the bar
> placement info
>
> v4:
> - Move message about relocating guest pages into loop, include number
> of pages and guest paddr
> - Fixed minor brace style issue
>
> Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
> CC: Ian Campbell <ian.campbell@xxxxxxxxxx>
> CC: Ian Jackson <ian.jackson@xxxxxxxxxx>
> CC: Stefano Stabellini <stefano.stabellini@xxxxxxxxxx>
> CC: Hanweidong <hanweidong@xxxxxxxxxx>
> CC: Keir Fraser <keir@xxxxxxx>
> ---
> tools/firmware/hvmloader/pci.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/tools/firmware/hvmloader/pci.c b/tools/firmware/hvmloader/pci.c
> index c1cb1e9..44168e2 100644
> --- a/tools/firmware/hvmloader/pci.c
> +++ b/tools/firmware/hvmloader/pci.c
> @@ -214,7 +214,11 @@ void pci_setup(void)
> pci_mem_start <<= 1;
>
> if ( (pci_mem_start << 1) != 0 )
> + {
> + printf("Low MMIO hole not large enough for all devices,"
> + " relocating some BARs to 64-bit\n");
> bar64_relocate = 1;
> + }
>
> /* Relocate RAM that overlaps PCI space (in 64k-page chunks). */
> while ( (pci_mem_start >> PAGE_SHIFT) < hvm_info->low_mem_pgend )
> @@ -227,6 +231,11 @@ void pci_setup(void)
> if ( hvm_info->high_mem_pgend == 0 )
> hvm_info->high_mem_pgend = 1ull << (32 - PAGE_SHIFT);
> hvm_info->low_mem_pgend -= nr_pages;
> + printf("Relocating 0x%x pages from "PRIllx" to "PRIllx\
> + " for lowmem MMIO hole\n",
> + nr_pages,
> + PRIllx_arg(((uint64_t)hvm_info->low_mem_pgend)<<PAGE_SHIFT),
> + PRIllx_arg(((uint64_t)hvm_info->high_mem_pgend)<<PAGE_SHIFT));
> xatp.domid = DOMID_SELF;
> xatp.space = XENMAPSPACE_gmfn_range;
> xatp.idx = hvm_info->low_mem_pgend;
This wasn't exactly what I suggested but it's correct.
Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> @@ -301,10 +310,10 @@ void pci_setup(void)
> pci_writel(devfn, bar_reg, bar_data);
> if (using_64bar)
> pci_writel(devfn, bar_reg + 4, bar_data_upper);
> - printf("pci dev %02x:%x bar %02x size "PRIllx": %08x\n",
> + printf("pci dev %02x:%x bar %02x size "PRIllx": %x%08x\n",
> devfn>>3, devfn&7, bar_reg,
> PRIllx_arg(bar_sz),
> - bar_data);
> + bar_data_upper, bar_data);
>
>
> /* Now enable the memory or I/O mapping. */
> --
> 1.7.9.5
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |