[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 2/5] hvmloader: Load large devices into high MMIO space as needed



Keep track of how much mmio space is left total, as well as the amount
of "low" MMIO space (<4GiB), and only load devices into high memory
if there is not enough low memory for the rest of the devices to fit.

Because devices are processed by size in order from large to small,
this should preferentially relocate devices with large BARs to 64-bit
space.

Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
CC: Ian Jackson <ian.jackson@xxxxxxxxxx>
CC: Ian Campbell <ian.campbell@xxxxxxxxxx>
CC: Stefano Stabellini <stefano.stabellini@xxxxxxxxxx>
CC: Hanweidong <hanweidong@xxxxxxxxxx>
---
 tools/firmware/hvmloader/pci.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/tools/firmware/hvmloader/pci.c b/tools/firmware/hvmloader/pci.c
index 8691a19..7f306a1 100644
--- a/tools/firmware/hvmloader/pci.c
+++ b/tools/firmware/hvmloader/pci.c
@@ -38,7 +38,8 @@ void pci_setup(void)
 {
     uint8_t is_64bar, using_64bar, bar64_relocate = 0;
     uint32_t devfn, bar_reg, cmd, bar_data, bar_data_upper;
-    uint64_t base, bar_sz, bar_sz_upper, low_mmio_left, mmio_total = 0;
+    uint64_t base, bar_sz, bar_sz_upper, low_mmio_left, mmio_total = 0,
+        mmio_left;
     uint32_t vga_devfn = 256;
     uint16_t class, vendor_id, device_id;
     unsigned int bar, pin, link, isa_irq;
@@ -244,6 +245,7 @@ void pci_setup(void)
     io_resource.max = 0x10000;
 
     low_mmio_left = pci_mem_end - pci_mem_start;
+    mmio_left = mmio_total;
 
     /* Assign iomem and ioport resources in descending order of size. */
     for ( i = 0; i < nr_bars; i++ )
@@ -252,7 +254,12 @@ void pci_setup(void)
         bar_reg = bars[i].bar_reg;
         bar_sz  = bars[i].bar_sz;
 
-        using_64bar = bars[i].is_64bar && bar64_relocate && (low_mmio_left < 
bar_sz);
+        /* Relocate to high memory if the total amount of MMIO needed
+         * is more than the low MMIO available.  Because devices are
+         * processed in order of bar_sz, this will preferentially
+         * relocate larger devices to high memory first. */
+        using_64bar = bars[i].is_64bar && bar64_relocate
+                       && (mmio_left > low_mmio_left);
         bar_data = pci_readl(devfn, bar_reg);
 
         if ( (bar_data & PCI_BASE_ADDRESS_SPACE) ==
@@ -276,6 +283,7 @@ void pci_setup(void)
                     low_mmio_left -= bar_sz;
                 bar_data &= ~PCI_BASE_ADDRESS_MEM_MASK;
             }
+            mmio_left -= bar_sz;
         }
         else
         {
-- 
1.7.9.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.