[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH V3 33/41] xen/arm: Add versatile express platform



This platform contains nearly nothing specific except the reset function.

Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>

Changes in v3:
    - Use ioremap_attr instead of fixmap

Changes in v2:
    - Add TODO to retrieve reset base address in the DT
---
 xen/arch/arm/platforms/vexpress.c        |   43 ++++++++++++++++++++++++++++++
 xen/arch/arm/shutdown.c                  |   14 ----------
 xen/include/asm-arm/config.h             |    3 ---
 xen/include/asm-arm/platforms/vexpress.h |    3 +++
 4 files changed, 46 insertions(+), 17 deletions(-)

diff --git a/xen/arch/arm/platforms/vexpress.c 
b/xen/arch/arm/platforms/vexpress.c
index fd4ce74..9b35e9d 100644
--- a/xen/arch/arm/platforms/vexpress.c
+++ b/xen/arch/arm/platforms/vexpress.c
@@ -18,7 +18,9 @@
  */
 
 #include <asm/platforms/vexpress.h>
+#include <asm/platform.h>
 #include <xen/mm.h>
+#include <xen/vmap.h>
 
 #define DCC_SHIFT      26
 #define FUNCTION_SHIFT 20
@@ -91,6 +93,47 @@ out:
 }
 
 /*
+ * TODO: Get base address from the device tree
+ * See arm,vexpress-reset node
+ */
+static void vexpress_reset(void)
+{
+    void __iomem *base;
+    void __iomem *sp810;
+
+    /* Use the SP810 system controller to force a reset */
+    base = ioremap_attr(SP810_ADDRESS & PAGE_MASK, PAGE_SIZE,
+                        PAGE_HYPERVISOR_NOCACHE);
+    if ( !base )
+    {
+        dprintk(XENLOG_ERR, "Unable to map SP810\n");
+        return;
+    }
+
+    sp810 = base + (SP810_ADDRESS & ~PAGE_MASK);
+
+    /* switch to slow mode */
+    iowritel(sp810, 0x3);
+    dsb(); isb();
+    /* writing any value to SCSYSSTAT reg will reset the system */
+    iowritel(sp810 + 4, 0x1);
+    dsb(); isb();
+
+    iounmap(base);
+}
+
+static const char const *vexpress_dt_compat[] __initdata =
+{
+    "arm,vexpress",
+    NULL
+};
+
+PLATFORM_START(vexpress, "VERSATILE EXPRESS")
+    .compatible = vexpress_dt_compat,
+    .reset = vexpress_reset,
+PLATFORM_END
+
+/*
  * Local variables:
  * mode: C
  * c-file-style: "BSD"
diff --git a/xen/arch/arm/shutdown.c b/xen/arch/arm/shutdown.c
index 0903842..767cc12 100644
--- a/xen/arch/arm/shutdown.c
+++ b/xen/arch/arm/shutdown.c
@@ -3,25 +3,11 @@
 #include <xen/cpu.h>
 #include <xen/delay.h>
 #include <xen/lib.h>
-#include <xen/mm.h>
 #include <xen/smp.h>
 #include <asm/platform.h>
 
 static void raw_machine_reset(void)
 {
-    /* XXX get this from device tree */
-#ifdef SP810_ADDRESS
-    /* Use the SP810 system controller to force a reset */
-    volatile uint32_t *sp810;
-    set_fixmap(FIXMAP_MISC, SP810_ADDRESS >> PAGE_SHIFT, DEV_SHARED);
-    sp810 = ((uint32_t *)
-             (FIXMAP_ADDR(FIXMAP_MISC) + (SP810_ADDRESS & ~PAGE_MASK)));
-    sp810[0] = 0x3; /* switch to slow mode */
-    dsb(); isb();
-    sp810[1] = 0x1; /* writing any value to SCSYSSTAT reg will reset system */
-    dsb(); isb();
-    clear_fixmap(FIXMAP_MISC);
-#endif
     platform_reset();
 }
 
diff --git a/xen/include/asm-arm/config.h b/xen/include/asm-arm/config.h
index 8ed72f5..7599202 100644
--- a/xen/include/asm-arm/config.h
+++ b/xen/include/asm-arm/config.h
@@ -149,9 +149,6 @@ extern unsigned long frametable_virt_end;
 #define GIC_CR_OFFSET 0x2000
 #define GIC_HR_OFFSET 0x4000 /* Guess work 
http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/064219.html
 */
 #define GIC_VR_OFFSET 0x6000 /* Virtual Machine CPU interface) */
-/* Board-specific: base address of system controller */
-#define SP810_ADDRESS 0x1C020000
-
 
 #endif /* __ARM_CONFIG_H__ */
 /*
diff --git a/xen/include/asm-arm/platforms/vexpress.h 
b/xen/include/asm-arm/platforms/vexpress.h
index 67f8fef..5cf3aba 100644
--- a/xen/include/asm-arm/platforms/vexpress.h
+++ b/xen/include/asm-arm/platforms/vexpress.h
@@ -23,6 +23,9 @@
 #define V2M_SYS_CFG_OSC4      4
 #define V2M_SYS_CFG_OSC5      5
 
+/* Board-specific: base address of system controller */
+#define SP810_ADDRESS 0x1C020000
+
 #ifndef __ASSEMBLY__
 #include <xen/inttypes.h>
 
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.