[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] IOMMU/AMD-Vi not working after XSA-36 with 970A-UD3
Am 04.05.2013 02:09, schrieb Eric Shelton: Did you try the xen boot option mentioned in XSA-36? iommu=amd-iommu-perdev-intremap Add it to the line in grub.conf for the hypervisor (e.g., "kernel /boot/xen.gz dom0_mem=2048M iommu=1,no-amd-iommu-perdev-intremap") Hello Eric,Thanks for the hint. Unfortuantly this wasn't a solution as reported in [0]. Even with the option "no-amd-iommu-perdev-intremap" the I/O virtualisation remains disabled (xm dmesg output see below). Regards, Marcus [0] http://lists.xen.org/archives/html/xen-devel/2013-03/msg01016.html(XEN) Xen version 4.1.4 (Debian 4.1.4-3) (waldi@xxxxxxxxxx) (gcc version 4.7.2 (Debian 4.7.2-5) ) Fri Apr 19 13:32:48 UTC 2013 (XEN) Bootloader: GRUB 1.99-27+deb7u1(XEN) Command line: placeholder com1=115200,8n1 console=com1 iommu=verbose,no-amd-iommu-perdev-intremap dom0_mem=768M (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) EDID info not retrieved because of reasons unknown (XEN) Disc information: (XEN) Found 3 MBR signatures (XEN) Found 3 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 0000000000098800 (usable) (XEN) 000000000009f800 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cfda0000 (usable) (XEN) 00000000cfda0000 - 00000000cfdd1000 (ACPI NVS) (XEN) 00000000cfdd1000 - 00000000cfe00000 (ACPI data) (XEN) 00000000cfe00000 - 00000000cff00000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000130000000 (usable) (XEN) ACPI: RSDP 000F6B80, 0014 (r0 GBT ) (XEN) ACPI: RSDT CFDD1000, 004C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: FACP CFDD1080, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: DSDT CFDD1100, 792A (r1 GBT GBTUACPI 1000 MSFT 3000000) (XEN) ACPI: FACS CFDA0000, 0040 (XEN) ACPI: SSDT CFDD8B00, 0544 (r1 PTLTD POWERNOW 1 LTP 1) (XEN) ACPI: MSDM CFDD9080, 0055 (r3 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: HPET CFDD9100, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) (XEN) ACPI: MCFG CFDD9140, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: MATS CFDD91C0, 0034 (r1 GBT 0 0)(XEN) ACPI: TAMG CFDD9230, 0202 (r1 GBT GBT B0 5455312E BG^A^A 53450101) (XEN) ACPI: APIC CFDD8A40, 00BC (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: MATS CFDD9440, 61FD (r1 MATS RCM 80000001 INTL 20061109) (XEN) ACPI: IVRS CFDDF6B0, 00E0 (r1 AMD RD890S 202031 AMD 0) (XEN) System RAM: 4093MB (4191456kB) (XEN) Domain heap initialised (XEN) Processor #0 0:6 APIC version 16 (XEN) Processor #1 0:6 APIC version 16 (XEN) IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Table is not found! (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2818.986 MHz processor. (XEN) Initing memory sharing. (XEN) IVHD Error: Conflicting IO-APIC 0x8 entries (XEN) AMD-Vi: Error initialization (XEN) I/O virtualisation disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 16 KiB. (XEN) HVM: ASIDs enabled. (XEN) SVM: Supported advanced features: (XEN) - Nested Page Tables (NPT) (XEN) - Last Branch Record (LBR) Virtualisation (XEN) - Next-RIP Saved on #VMEXIT (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) Brought up 2 CPUs (XEN) do_IRQ: 1.231 No irq handler for vector (irq -1) (XEN) Xenoprofile: AMD IBS detected (0x0000001f) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |