[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH 4 of 7 v4] blktap3/tapback: Introduce back-end XenStore path handler



This patch introduces the handler executed when the back-end XenStore path gets
modified. A back-end XenStore path is modified as a result of a device
creation/removal request. The device is created/removed depending on whether
its path exists/does not exist in XenStore.

Creating a device comprises creating the in-memory representation of it and
adding it to the list of devices, locating the tapdisk designated to serve
this VBD, and setting a XenStore watch to the front-end path of the
newly-created device.

Deleting a device comprises removing that XenStore watch and deallocating its
in-memory representation.

Signed-off-by: Thanos Makatos <thanos.makatos@xxxxxxxxxx>

---
Changed since v2:
  * Removed the "serial" thing.
  * Function tapback_backend_handle_backend_watch doesn't always have to scan
  * the entire back-end sub-tree, this is left as a future optimisation
    (relevant comment inside code updated).
  * Replaced mprintf with asprintf.
  * Check for failures in tapback_backend_scan.
  * Minor code and whitespace clean up.
  * The tapback daemon searches for a suitable tapdisk and creates one if none
    is found. It also kills it when the front-end disconnects.

Changed since v3:
  * In function tapback_backend_destroy_device, pass the VDI's
    type:/path/to/file as there's no minor number any more.
  * Function blkback_find_tapdisk doesn't parse the type:/path/to/file any
    more, it expects it already parsed.
  * In function tapback_backend_create_device, parse type:/path/to/file and
    store it the VBD.
  * Pass the type:/path/to/file to tap_ctl_info instead of the minor number.

diff --git a/tools/blktap3/tapback/backend.c b/tools/blktap3/tapback/backend.c
new file mode 100644
--- /dev/null
+++ b/tools/blktap3/tapback/backend.c
@@ -0,0 +1,471 @@
+/*
+ * Copyright (C) 2012      Citrix Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ *
+ * This file contains the handler executed when the back-end XenStore path gets
+ * modified.
+ */
+
+#include "tapback.h"
+#include "xenstore.h"
+
+/**
+ * Removes the XenStore watch from the front-end.
+ *
+ * @param device the VBD whose front-end XenStore path should stop being
+ * watched
+ */
+static void
+tapback_device_unwatch_frontend_state(vbd_t * const device)
+{
+    assert(device);
+
+    if (device->frontend_state_path)
+        xs_unwatch(blktap3_daemon.xs, device->frontend_state_path,
+                BLKTAP3_FRONTEND_TOKEN);
+
+    free(device->frontend_state_path);
+    device->frontend_state_path = NULL;
+}
+
+/**
+ * Destroys and deallocates the back-end part of a VBD.
+ *
+ * @param device the VBD to destroy
+ */
+static void
+tapback_backend_destroy_device(vbd_t * const device)
+{
+    int err;
+
+    assert(device);
+
+    TAILQ_REMOVE(&blktap3_daemon.devices, device, backend_entry);
+
+    tapback_device_unwatch_frontend_state(device);
+
+    /*
+     * kill the tapdisk
+     */
+    err = tap_ctl_destroy(device->tap.pid, device->params, 0, NULL);
+    if (err)
+        WARN("failed to destroy tapdisk %d %s: %s (error ignored)\n",
+                device->tap.pid, device->params, strerror(-err));
+
+    free(device->frontend_path);
+    free(device->name);
+    free(device->type);
+    free(device->path);
+    free(device->params);
+    free(device);
+}
+
+/**
+ * Retrieves the tapdisk designated to serve this device, storing this
+ * information in the supplied VBD handle.
+ *
+ * @param param <type>:/path/to/file
+ * @param tap output parameter that receives the tapdisk process information.
+ * The parameter is undefined when the function returns a non-zero value.
+ * @returns 0 if a suitable tapdisk is found, ESRCH if no suitable tapdisk is
+ * found, and an error code in case of error
+ *
+ * TODO rename function
+ *
+ * XXX Only called by blkback_probe.
+ */
+static inline int
+blkback_find_tapdisk(const char *type, const char *path, tap_list_t *tap)
+{
+    struct tqh_tap_list list;
+    tap_list_t *_tap;
+    int err;
+
+    assert(type);
+    assert(path);
+    assert(tap);
+
+    err = tap_ctl_list(&list);
+    if (err) {
+        WARN("error listing tapdisks: %s\n", strerror(err));
+        goto out;
+    }
+
+    err = ESRCH;
+    if (!TAILQ_EMPTY(&list)) {
+        tap_list_for_each_entry(_tap, &list) {
+            if (_tap->type && !strcmp(_tap->type, type) && _tap->path
+                    && !strcmp(_tap->path, path)) {
+                err = 0;
+                memcpy(tap, _tap, sizeof(tap));
+                break;
+            }
+        }
+        tap_ctl_list_free(&list);
+    } else
+        DBG("no tapdisks\n");
+
+out:
+    return err;
+}
+
+/**
+ * Creates a device and adds it to the list of devices.
+ * Initiates a XenStore watch to the front-end state.
+ *
+ * Creating the device implies initializing the handle and retrieving all the
+ * information of the tapdisk serving this VBD.
+ *
+ * @param domid the ID of the domain where the VBD is created
+ * @param name the name of the device
+ * @returns 0 on success, an error code otherwise
+ */
+static inline int
+tapback_backend_create_device(const domid_t domid, const char * const name)
+{
+    vbd_t *device = NULL;
+    int err = 0;
+
+    assert(name);
+
+    DBG("creating device domid=%d, devid=%s\n", domid, name);
+
+    if (!(device = calloc(1, sizeof(*device)))) {
+        WARN("error allocating memory\n");
+        err = -errno;
+        goto out;
+    }
+
+    device->domid = domid;
+
+    TAILQ_INSERT_TAIL(&blktap3_daemon.devices, device, backend_entry);
+
+    if (!(device->name = strdup(name))) {
+        err = -errno;
+        goto out;
+    }
+
+    /*
+     * Get the front-end path from XenStore. We need this to talk to the
+     * front-end.
+     */
+    if (!(device->frontend_path = tapback_device_read(device, "frontend"))) {
+        err = errno;
+        WARN("failed to read front-end path: %s\n", strerror(err));
+        goto out;
+    }
+
+    /*
+     * Get the file path backing the VBD.
+     */
+    device->params = tapback_xs_read(blktap3_daemon.xs, blktap3_daemon.xst,
+            "%s/%d/%s/params", BLKTAP3_BACKEND_PATH, domid, name);
+    if (!device->params) {
+        err = errno;
+        WARN("failed to read backing file: %s\n", strerror(err));
+        goto out;
+    }
+    DBG("need to find tapdisk serving \'%s\'\n", device->params);
+
+    err = parse_params(device->params, &device->type, &device->path);
+    if (err) {
+        WARN("failed to parse params \'%s\': %s\n", device->params,
+                strerror(-err));
+        goto out;
+    }
+
+    err = blkback_find_tapdisk(device->type, device->path, &device->tap);
+    if (!err) {
+        DBG("found tapdisk pid=%d\n", device->tap.pid);
+    } else if (err == ESRCH) {
+        /* TODO replace with tap_ctl_create */
+        DBG("no such tapdisk\n");
+        err = tap_ctl_spawn();
+        if (err <= 0) {
+            WARN("failed to create tapdisk: %s\n", strerror(-err));
+            goto out;
+        }
+        device->tap.pid = err;
+        DBG("spawned tapdisk pid=%d\n", device->tap.pid);
+        err = tap_ctl_open(device->tap.pid, device->params, 0, NULL, NULL);
+        if (err) {
+            WARN("failed to open %s on tapdisk pid=%d: %s\n", device->params,
+                    device->tap.pid, strerror(-err));
+            goto out;
+        }
+        DBG("opened %s on tapdisk pid=%d\n", device->params, device->tap.pid);
+    } else  {
+        WARN("error looking for tapdisk: %s\n", strerror(err));
+        goto out;
+    }
+
+    /*
+     * get the VBD parameters from the tapdisk
+     */
+    if ((err = tap_ctl_info(device->tap.pid, device->params, &device->sectors,
+                    &device->sector_size, &device->info))) {
+        WARN("error retrieving disk characteristics: %s\n", strerror(-err));
+        goto out;
+    }
+
+       /*
+        * Finally, watch the front-end path in XenStore for changes, i.e.
+     * /local/domain/<domid>/device/vbd/<devname>/state
+     * After this, we wait for the front-end to switch state to continue with
+     * the initialisation.
+        */
+    if (asprintf(&device->frontend_state_path, "%s/state",
+                device->frontend_path) == -1) {
+        /* TODO log error */
+        err = -errno;
+        goto out;
+    }
+    assert(device->frontend_state_path);
+
+    /*
+     * We use the same token for all front-end watches. We don't have to use a
+     * unique token for each front-end watch because when a front-end watch
+     * fires we are given the XenStore path that changed.
+     */
+    if (!xs_watch(blktap3_daemon.xs, device->frontend_state_path,
+                BLKTAP3_FRONTEND_TOKEN)) {
+        free(device->frontend_state_path);
+        err = -errno;
+        goto out;
+    }
+
+out:
+    if (err) {
+        WARN("error creating device: domid=%d name=%s err=%d (%s)\n",
+                domid, name, err, strerror(err));
+        if (device)
+            tapback_backend_destroy_device(device);
+    }
+    return err;
+}
+
+/**
+ * Creates (removes) a device depending on the existence (non-existence) of the
+ * "backend/<backend name>/@domid/@devname" XenStore path.
+ *
+ * @param domid the ID of the domain where the VBD is created
+ * @param devname device name
+ * @returns 0 on success, an error code otherwise
+ */
+static int
+tapback_backend_probe_device(const domid_t domid, const char * const devname)
+{
+    int should_exist = 0, create = 0, remove = 0;
+    vbd_t *device = NULL;
+    char * s = NULL;
+
+    assert(devname);
+
+    DBG("probing device domid=%d name=%s\n", domid, devname);
+
+    /*
+     * Ask XenStore if the device _should_ exist.
+     */
+    s = tapback_xs_read(blktap3_daemon.xs, blktap3_daemon.xst, "%s/%d/%s",
+            BLKTAP3_BACKEND_PATH, domid, devname);
+    should_exist = s != NULL;
+    free(s);
+
+    /*
+     * Search the device list for this specific device.
+     */
+    tapback_backend_find_device(device,
+            device->domid == domid && !strcmp(device->name, devname));
+
+    /*
+        * If XenStore says that the device should exist but it's not in our 
device 
+     * list, we must create it. If it's the other way round, this is a removal.
+     */
+    remove = device && !should_exist;
+    create = !device && should_exist;
+
+    if (!create && !remove) {
+        /*
+         * A watch has triggered on a path we're not interested in.
+         * TODO Check if we can avoid probing the device completely based on
+         * the path that triggered.
+         */
+        return 0;
+    }
+
+    /*
+     * Remember that remove and create may both be true at the same time, as
+     * this indicates that the device has been removed and re-created too fast.
+     * In this case, we too need to remove and re-create the device,
+     * respectively.
+     */
+
+    if (remove)
+        tapback_backend_destroy_device(device);
+
+    if (create) {
+        const int err = tapback_backend_create_device(domid, devname);
+        if (0 != err) {
+            WARN("error creating device %s on domain %d: %s\n", devname, domid,
+                    strerror(err));
+            return err;
+        }
+    }
+
+    return 0;
+}
+
+/**
+ * Scans XenStore for all blktap3 devices and probes each one of them.
+ *
+ * XXX Only called by tapback_backend_handle_backend_watch.
+ */
+static int
+tapback_backend_scan(void)
+{
+    vbd_t *device = NULL, *next = NULL;
+    unsigned int i = 0, j = 0, n = 0, m = 0;
+    char **dir = NULL;
+    int err = 0;
+
+    DBG("scanning entire back-end\n");
+
+    /*
+     * scrap all non-existent devices
+     * TODO Why do we do this? Is this costly?
+     */
+
+    tapback_backend_for_each_device(device, next) {
+        err = tapback_backend_probe_device(device->domid, device->name);
+        if (err) {
+            WARN("error probing device %s of domain %d: %s\n", device->name,
+                    device->domid, strerror(err));
+            /* TODO Should we fail in this case of keep probing? */
+            goto out;
+        }
+    }
+
+    /*
+     * probe the new ones
+     *
+     * TODO We're checking each and every device in each and every domain,
+     * could there be a performance issue in the presence of many VMs/VBDs?
+     * (e.g. boot-storm)
+     */
+    if (!(dir = xs_directory(blktap3_daemon.xs, blktap3_daemon.xst,
+                    BLKTAP3_BACKEND_PATH, &n))) {
+        err = errno;
+        if (err == ENOENT)
+            err = 0;
+        else
+            WARN("error listing %s: %s\n", BLKTAP3_BACKEND_PATH,
+                    strerror(err));
+        goto out;
+    }
+
+    DBG("probing %d domains\n", n);
+
+    for (i = 0; i < n; i++) { /* for each domain */
+        char *path = NULL, **sub = NULL, *end = NULL;
+        domid_t domid = 0;
+
+        /*
+         * Get the domain ID.
+         */
+        domid = strtoul(dir[i], &end, 0);
+        if (*end != 0 || end == dir[i])
+            continue;
+
+        /*
+         * Read the devices of this domain.
+         */
+        if (asprintf(&path, "%s/%d", BLKTAP3_BACKEND_PATH, domid) == -1) {
+            /* TODO log error */
+            err = errno;
+            goto out;
+        }
+        sub = xs_directory(blktap3_daemon.xs, blktap3_daemon.xst, path, &m);
+        err = errno;
+        free(path);
+
+        if (!sub) {
+            WARN("error listing %s: %s\n", path, strerror(err));
+            goto out;
+        }
+
+        /*
+         * Probe each device.
+         */
+        for (j = 0; j < m; j++) {
+            err = tapback_backend_probe_device(domid, sub[j]);
+            if (err) {
+                WARN("error probing device %s of domain %d: %s\n", sub[j],
+                        domid, strerror(err));
+                goto out;
+            }
+        }
+
+        free(sub);
+    }
+
+out:
+    free(dir);
+    return err;
+}
+
+int
+tapback_backend_handle_backend_watch(char * const path)
+{
+    char *s = NULL, *end = NULL, *name = NULL;
+    domid_t domid = 0;
+
+    assert(path);
+
+    DBG("%s\n", path);
+
+    s = strtok(path, "/");
+    assert(!strcmp(s, XENSTORE_BACKEND));
+    if (!(s = strtok(NULL, "/")))
+        return tapback_backend_scan();
+
+    assert(!strcmp(s, BLKTAP3_BACKEND_NAME));
+    if (!(s = strtok(NULL, "/")))
+        return tapback_backend_scan();
+
+    domid = strtoul(s, &end, 0);
+    if (*end != 0 || end == s) {
+        WARN("invalid domain ID \'%s\'\n", s);
+        return EINVAL;
+    }
+
+    /*
+     * TODO Optimisation: since we know which domain changed, we don't have to
+     * scan the whole thing. Add the domid as an optional parameter to
+     * tapback_backend_scan.
+     */
+    if (!(name = strtok(NULL, "/")))
+        return tapback_backend_scan();
+
+    /*
+     * Create or remove a specific device.
+     *
+     * TODO tapback_backend_probe_device reads xenstore again to see if the
+     * device should exist, but we already know that in the current function.
+     * Optimise this case.
+     */
+    return tapback_backend_probe_device(domid, name);
+}

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.