Re: [Xen-devel] [XenARM] Running Xen ARM on Fast Model

[Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>]

Unfortunately I cannot see anything wrong with your command line or
with the way you build Xen.
I tried to repeat you steps but it works for me, certainly pass the "No
valid device tree" point.

On Tue, 2 Apr 2013, Khandelwal, Shubham wrote:
> Hi Stefano,
> 
> This is the FAST Model command I am using.
> 
> model_shell 
> /path/to/FastModelsPortfolio_8.0/examples/RTSM_VE/Build_Cortex-A15x1/Linux-Release-GCC-4.4/cadi_system_Linux-Release-GCC-4.4.so
>  /path/to/xen-unstable.git-xen-arm-4.3-3/xen/xen -C 
> motherboard.flashloader0.fname=/path/to/boot/zImage
> 
> Regards
> 
> Shubham Khandelwal
> 
> 
> -----Original Message-----
> From: Stefano Stabellini [mailto:stefano.stabellini@xxxxxxxxxxxxx] 
> Sent: Monday, April 01, 2013 7:46 PM
> To: Khandelwal, Shubham
> Cc: Stefano Stabellini; 'xen-arm@xxxxxxxxxxxxx'; Datta, Souvik; 
> xen-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [XenARM] Running Xen ARM on Fast Model
> 
> On Mon, 1 Apr 2013, Khandelwal, Shubham wrote:
> > Hi Stefano,
> > 
> > I have done almost the same thing but with toolchain version 4.6.3. The dtb 
> > file is being recognized during compiling xen as is
> > evident from the output below. But still is not being recognized by the 
> > Fast Model and it shows the same error.
> > 
> > ...
> > 
> > arm-linux-gnueabihf-ld -marmelf_linux_eabi -T xen.lds -N prelink.o \
> > 
> > ÂÂÂÂÂ ÂÂÂ 
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.0.o
> >  -o
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1
> > 
> > arm-linux-gnueabihf-nm -n 
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1
> >  |
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/tools/symbols
> > >/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.S
> > 
> > make -f 
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/Rules.mk
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.o
> > 
> > make[3]: Entering directory 
> > `/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/arch/arm'
> > 
> > arm-linux-gnueabihf-gcc -D__ASSEMBLY__ -include
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/include/xen/config.h
> >  -O1 -fno-omit-frame-pointer -marm -g
> > -fno-strict-aliasing -Wall -Wstrict-prototypes 
> > -Wdeclaration-after-statement -Wno-unused-but-set-variable -fno-builtin 
> > -fno-common
> > -Wredundant-decls -iwithprefix include -Werror -Wno-pointer-arith -pipe
> > -I/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/include 
> > -fno-stack-protector -fno-exceptions -Wnested-externs
> > -msoft-float -mcpu=cortex-a15 -mfpu=vfpv3 -mfloat-abi=softfp 
> > -DGCC_HAS_VISIBILITY_ATTRIBUTE -fno-optimize-sibling-calls -g
> > -D__XEN__ -include 
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/include/xen/config.h
> >  -DVERBOSE
> > -fno-omit-frame-pointer -DCONFIG_FRAME_POINTER -MMD -MF ..xen-syms.1.o.d
> > -DCONFIG_DTB_FILE=\"/home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/vexpress-v2p-ca15-tc1.dtb\"
> >  -c
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.S
> >  -o
> > /home/phoenix/Desktop/xen-unstable.git-xen-arm-4.3-3-e2cb352/xen/.xen-syms.1.o
> > 
> 
> Could you please post the Fast Model command line that you are using?
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel