[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] ACPI: Add fixups for AMD P-state figures.
On Tue, Mar 05, 2013 at 03:22:25PM -0500, Boris Ostrovsky wrote: > On 03/05/2013 02:45 PM, Konrad Rzeszutek Wilk wrote: > >This a copy-n-paste from two Linux git commits: > > > >- f594065faf4f9067c2283a34619fc0714e79a98d > > ACPI: Add fixups for AMD P-state figures > >- 9855d8ce41a7801548a05d844db2f46c3e810166 > > ACPI: Check MSR valid bit before using P-state frequencies > > > >The issue is that "some AMD systems may round the frequencies in > >ACPI tables to 100MHz boundaries. We canobtain the real > >frequencies from MSRs, so add a quirk to fix these frequencies up > >on AMD systems." (from f594065..) > > > >In discussion (around 9855d8..) "it turned out that indeed real > >HW/BIOSes may choose to not set the valid bit and thus mark the > >P-state as invalid. So this could be considered a fix for broken > >BIOSes that also works around the issue on Xen." (from 9855d8..) > > > >I've tested it under Dell Inc. PowerEdge T105 /0RR825, BIOS 1.3.2 > >08/20/2008 where this quirk can indeed be observed. > > > >CC: stefan.bader@xxxxxxxxxxxxx > >CC: bp@xxxxxxx > >CC: borislav.ostrovsky@xxxxxxxxxx > > boris.ostrovsky@xxxxxxxxxx Whoops! Here is an updated version: >From 3b7584f0c3c91d073bd760a038d0091b3bf5a19b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> Date: Tue, 5 Mar 2013 14:40:52 -0500 Subject: [PATCH] ACPI: Add fixups for AMD P-state figures. This a copy-n-paste from two Linux git commits: - f594065faf4f9067c2283a34619fc0714e79a98d ACPI: Add fixups for AMD P-state figures - 9855d8ce41a7801548a05d844db2f46c3e810166 ACPI: Check MSR valid bit before using P-state frequencies The issue is that "some AMD systems may round the frequencies in ACPI tables to 100MHz boundaries. We canobtain the real frequencies from MSRs, so add a quirk to fix these frequencies up on AMD systems." (from f594065..) In discussion (around 9855d8..) "it turned out that indeed real HW/BIOSes may choose to not set the valid bit and thus mark the P-state as invalid. So this could be considered a fix for broken BIOSes that also works around the issue on Xen." (from 9855d8..) I've tested it under Dell Inc. PowerEdge T105 /0RR825, BIOS 1.3.2 08/20/2008 where this quirk can indeed be observed. CC: stefan.bader@xxxxxxxxxxxxx CC: bp@xxxxxxx CC: boris.ostrovsky@xxxxxxxxxx [v1: Indent, #define, and email changes per Boris's review] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> --- xen/arch/x86/acpi/cpufreq/powernow.c | 38 ++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/xen/arch/x86/acpi/cpufreq/powernow.c b/xen/arch/x86/acpi/cpufreq/powernow.c index a9b7792..5037c30 100644 --- a/xen/arch/x86/acpi/cpufreq/powernow.c +++ b/xen/arch/x86/acpi/cpufreq/powernow.c @@ -147,6 +147,42 @@ static int powernow_cpufreq_target(struct cpufreq_policy *policy, return 0; } +static void amd_fixup_frequency(struct xen_processor_px *px) +{ + u32 hi, lo, fid, did; + int index = px->control & 0x00000007; + + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return; + + if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) + || boot_cpu_data.x86 == 0x11) { + rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); + /* + * MSR C001_0064+: + * Bit 63: PstateEn. Read-write. If set, the P-state is valid. + */ + if (!(hi & (1UL << 31))) + return; + + fid = lo & 0x3f; + did = (lo >> 6) & 7; + if (boot_cpu_data.x86 == 0x10) + px->core_frequency = (100 * (fid + 0x10)) >> did; + else + px->core_frequency = (100 * (fid + 8)) >> did; + } +} + +static void amd_fixup_freq(struct processor_performance *perf) +{ + + int i; + + for (i = 0; i < perf->state_count; i++) + amd_fixup_frequency(&perf->states[i]); + +} static int powernow_cpufreq_verify(struct cpufreq_policy *policy) { struct acpi_cpufreq_data *data; @@ -253,6 +289,8 @@ static int powernow_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->governor = cpufreq_opt_governor ? : CPUFREQ_DEFAULT_GOVERNOR; + amd_fixup_freq(perf); + /* table init */ for (i = 0; i < perf->state_count && i <= max_hw_pstate; i++) { if (i > 0 && perf->states[i].core_frequency >= -- 1.8.0.2 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |