|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [Xen-users] Some kind of hardware issue
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I ran into strange disk issues when I tried to upgrade to the pvops kernels on two on my amd motherboards. On one of them, all I had to do was try to copy a large file and I'd get a slew of disk errors. I went back to xen-3.x and a xenified kernel (from opensuse) and all was well. See http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1806 On 03/01/2013 05:55 PM, Daniel Hood wrote: > Hi all, > > First time posting. > > So the story goes I bought a dedicated box from a hosting company. > Opteron 1218 and MSI motherboard (Not sure which model exactly, > LSPCI output is below). I've tried installing Debian 6, Ubuntu > 12.04 and CentOS 6 then install Xen 4 hypervisor on them at > different stages of this issue. All three boot their normal kernels > perfectly. Can't seem to find any errors related. > > I then try to boot into my Xen kernel and these are the errors I'm > getting: http://i.imgur.com/LHq7KCH.png > http://i.imgur.com/fEfnm0I.png > > I've tried booting back into the normal kernel's and shit works. > I've tried adding 'noacpi', 'acpi=off' and 'libata.force=noncq' on > both the kernel and the module lines. No idea what else to try. Any > ideas anyone? > > Here is the outputs from the CentOS attempts: > > ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > [root@virt-host01 init.d]# cat /boot/grub/grub.conf # # Hetzner > Online AG - installimage # GRUB bootloader configuration file # > > timeout 5 default 0 > > title CentOS (3.7.10-1.el6xen.x86_64) root (hd0,1) kernel /xen.gz > dom0_mem=1024M cpufreq=xen dom0_max_vcpus=1 dom0_vcpus_pin module > /boot/vmlinuz-3.7.10-1.el6xen.x86_64 ro root=/dev/md1 rd_NO_LUKS > rd_NO_DM nomodeset SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 > KEYTABLE=de module /boot/initramfs-3.7.10-1.el6xen.x86_64.img > > title CentOS (3.7.10-1.el6xen.x86_64) root (hd0,1) kernel > /boot/vmlinuz-3.7.10-1.el6xen.x86_64 ro root=/dev/md1 rd_NO_LUKS > rd_NO_DM nomodeset SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 > KEYTABLE=de initrd /boot/initramfs-3.7.10-1.el6xen.x86_64.img > > title CentOS (2.6.32-279.22.1.el6.x86_64) root (hd0,1) kernel > /boot/vmlinuz-2.6.32-279.22.1.el6.x86_64 ro root=/dev/md1 > rd_NO_LUKS rd_NO_DM nomodeset initrd > /boot/initramfs-2.6.32-279.22.1.el6.x86_64.img > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > > LSPCI output: > > 00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) > 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev > a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 > (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory > Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 > Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation > C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 > Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation > C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA > Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: > NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI > bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 > VGA compatible controller: NVIDIA Corporation C51 [Quadro NVS > 210S/GeForce 6150LE] (rev a2) 00:09.0 RAM memory: NVIDIA > Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA > Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA > Corporation MCP51 SMBus (rev a3) 00:0b.0 USB controller: NVIDIA > Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: > NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE > interface: NVIDIA Corporation MCP51 IDE (rev a1) 00:0e.0 IDE > interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev a1) > 00:0f.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA > Controller (rev a1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 > PCI Bridge (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 > Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro > Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology > Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro > Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host > bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > > -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > > Smartctl output: > > root@rescue ~ # smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 > [x86_64-linux-3.4.28] (local build) Copyright (C) 2002-11 by Bruce > Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === Model Family: SAMSUNG > SpinPoint T166 Device Model: SAMSUNG HD321KJ Serial Number: > S0MQJDQP603258 LU WWN Device Id: 5 0000f0 0db603258 Firmware > Version: CP100-10 User Capacity: 320,072,933,376 bytes [320 GB] > Sector Size: 512 bytes logical/physical Device is: In > smartctl database [for details use: -P show] ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 3b Local Time is: Fri Mar > 1 23:50:44 2013 CET SMART support is: Available - device has SMART > capability. SMART support is: Enabled > > === START OF READ SMART DATA SECTION === SMART overall-health > self-assessment test result: PASSED > > General SMART Values: Offline data collection status: (0x00) > Offline data collection activity was never started. Auto Offline > Data Collection: Disabled. Self-test execution status: ( 41) > The self-test routine was interrupted by the host with a hard or > soft reset. Total time to complete Offline data collection: > ( 5746) seconds. Offline data collection capabilities: > (0x5b) SMART execute Offline immediate. Auto Offline data > collection on/off supp ort. Suspend Offline collection upon new > command. Offline surface scan supported. Self-test supported. No > Conveyance Self-test supported. Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before > entering power-saving mode. Supports SMART auto save timer. Error > logging capability: (0x01) Error logging supported. General > Purpose Logging supported. Short self-test routine recommended > polling time: ( 2) minutes. Extended self-test routine > recommended polling time: ( 97) minutes. SCT capabilities: > (0x003f) SCT Status supported. SCT Error Recovery Control > supported. SCT Feature Control supported. SCT Data Table > supported. > > SMART Attributes Data Structure revision number: 16 Vendor Specific > SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG > VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 > Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always > - 1 3 Spin_Up_Time 0x0007 100 100 015 Pre-fail > Always - 5696 4 Start_Stop_Count 0x0032 100 100 > 000 Old_age Always - 21 5 Reallocated_Sector_Ct 0x0033 > 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate > 0x000f 253 253 051 Pre-fail Always - 0 8 > Seek_Time_Performance 0x0025 253 253 015 Pre-fail > Offline - 0 9 Power_On_Hours 0x0032 100 100 000 > Old_age Always - 6877 10 Spin_Retry_Count 0x0033 253 > 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count > 0x0012 253 253 000 Old_age Always - 0 12 > Power_Cycle_Count 0x0032 100 100 000 Old_age Always > - 21 187 Reported_Uncorrect 0x0032 253 253 000 > Old_age Always - 0 188 Command_Timeout 0x0032 253 > 253 000 Old_age Always - 0 190 Airflow_Temperature_Cel > 0x0022 064 060 000 Old_age Always - 36 194 > Temperature_Celsius 0x0022 130 118 000 Old_age Always > - 36 195 Hardware_ECC_Recovered 0x001a 100 100 000 > Old_age Always - 461965997 196 Reallocated_Event_Count 0x0032 > 253 253 000 Old_age Always - 0 197 > Total_Pending_Sectors 0x0012 253 253 000 Old_age Always > - 0 198 Offline_Uncorrectable 0x0030 253 253 000 > Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 > 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate > 0x000a 100 100 000 Old_age Always - 0 201 > Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always > - 0 202 Data_Address_Mark_Errs 0x0032 253 253 000 > Old_age Always - 0 > > SMART Error Log Version: 1 No Errors Logged > > SMART Self-test log structure revision number 1 Num > Test_Description Status Remaining > LifeTime(hours) LBA _of_first_error # 1 Extended offline > Interrupted (host reset) 90% 6876 - # 2 Extended > offline Interrupted (host reset) 90% 6869 - # > 3 Extended offline Interrupted (host reset) 90% 6868 > - # 4 Extended offline Completed without error 00% > 6499 - > > Note: selective self-test log revision number (0) not 1 implies > that no selectiv e self-test has ever been run SMART Selective > self-test log data structure revision number 0 Note: revision > number not 1 implies that no selective self-test has ever been ru > n SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 > Not_testing 2 0 0 Not_testing 3 0 0 > Not_testing 4 0 0 Not_testing 5 0 0 > Not_testing Selective self-test flags (0x0): After scanning > selected spans, do NOT read-scan remainder of disk. If Selective > self-test is pending on power-up, resume after 0 minute delay. > > _______________________________________________ Xen-users mailing > list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users > - -- Tony Lill, OCT, Tony.Lill@xxxxxxxxxxxxxxxxxxx President, A. J. Lill Consultants (519) 650 0660 539 Grand Valley Dr., Cambridge, Ont. N3H 2S2 (519) 241 2461 - --------------- http://www.ajlc.waterloo.on.ca/ ---------------- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iEYEARECAAYFAlExWz8ACgkQGS8yZq1uvxA6RACePHzUrdXxFElp2IllVxvx86ej 3IEAn1CNRtuV5Dv6oBwPtK5j7VHopdOl =HrpZ -----END PGP SIGNATURE----- _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |
