[ 0.000000] Linux version 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 (abuild@build20) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Mon Feb 4 07:02:12 UTC 2013 [ 0.000000] Command line: debug panic=9 sysrq=yes showopts log_buf_len=64M console=hvc0 [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed [ 0.000000] 1-1 mapping on 9b->100 [ 0.000000] Freeing 8c21c-100000 pfn range: 474596 pages freed [ 0.000000] 1-1 mapping on 8c21c->100000 [ 0.000000] Released 474697 pages of unused memory [ 0.000000] Set 474697 page(s) to 1-1 mapping [ 0.000000] Populating 5dfb1e-653967 pfn range: 474697 pages added [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009b000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x000000008c21bfff] usable [ 0.000000] Xen: [mem 0x000000008c21c000-0x000000008c2eefff] ACPI NVS [ 0.000000] Xen: [mem 0x000000008c2ef000-0x000000008c3defff] ACPI data [ 0.000000] Xen: [mem 0x000000008c3df000-0x000000008d7defff] ACPI NVS [ 0.000000] Xen: [mem 0x000000008d7df000-0x000000008f301fff] ACPI data [ 0.000000] Xen: [mem 0x000000008f302000-0x000000008f34efff] reserved [ 0.000000] Xen: [mem 0x000000008f34f000-0x000000008f3d3fff] ACPI data [ 0.000000] Xen: [mem 0x000000008f3d4000-0x000000008f3ddfff] ACPI NVS [ 0.000000] Xen: [mem 0x000000008f3de000-0x000000008f3e1fff] ACPI data [ 0.000000] Xen: [mem 0x000000008f3e2000-0x000000008f4cefff] ACPI NVS [ 0.000000] Xen: [mem 0x000000008f4cf000-0x000000008f4fffff] ACPI data [ 0.000000] Xen: [mem 0x000000008f500000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000a0000000-0x00000000afffffff] reserved [ 0.000000] Xen: [mem 0x00000000fc000000-0x00000000fcffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec90000-0x00000000fec90fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] Xen: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000066fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x670000 max_arch_pfn = 0x400000000 [ 0.000000] e820: last_pfn = 0x8c21c max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x031f2fff] [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 28672 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x8c21bfff] [ 0.000000] [mem 0x00000000-0x8c21bfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x8c21bfff @ [mem 0x00b9a000-0x00ffffff] [ 0.000000] xen: setting RW the range fcc000 - 1000000 [ 0.000000] init_memory_mapping: [mem 0x100000000-0x66fffffff] [ 0.000000] [mem 0x100000000-0x66fffffff] page 4k [ 0.000000] kernel direct mapping tables up to 0x66fffffff @ [mem 0x89685000-0x8c21bfff] [ 0.000000] xen: setting RW the range 8c21b000 - 8c21c000 [ 0.000000] log_buf_len: 67108864 [ 0.000000] early log buf free: 2093540(99%) [ 0.000000] RAMDISK: [mem 0x02388000-0x031f2fff] [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 000000008f4fd120 000A4 (v01 INTEL S5520UT 00000000 01000013) [ 0.000000] ACPI: FACP 000000008f4fb000 000F4 (v04 INTEL S5520UT 00000000 MSFT 0100000D) [ 0.000000] ACPI: DSDT 000000008f4f4000 065E9 (v02 INTEL S5520UT 00000003 MSFT 0100000D) [ 0.000000] ACPI: FACS 000000008f3e2000 00040 [ 0.000000] ACPI: APIC 000000008f4f3000 001A8 (v02 INTEL S5520UT 00000000 MSFT 0100000D) [ 0.000000] ACPI: MCFG 000000008f4f2000 0003C (v01 INTEL S5520UT 00000001 MSFT 0100000D) [ 0.000000] ACPI: HPET 000000008f4f1000 00038 (v01 INTEL S5520UT 00000001 MSFT 0100000D) [ 0.000000] ACPI: SLIT 000000008f4f0000 00030 (v01 INTEL S5520UT 00000001 MSFT 0100000D) [ 0.000000] ACPI: SRAT 000000008f4ef000 00430 (v02 INTEL S5520UT 00000001 MSFT 0100000D) [ 0.000000] ACPI: SPCR 000000008f4ee000 00050 (v01 INTEL S5520UT 00000000 MSFT 0100000D) [ 0.000000] ACPI: WDDT 000000008f4ed000 00040 (v01 INTEL S5520UT 00000000 MSFT 0100000D) [ 0.000000] ACPI: SSDT 000000008f4d2000 1AFC4 (v02 INTEL SSDT PM 00004000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000008f4d1000 001D8 (v02 INTEL IPMI 00004000 INTL 20061109) [ 0.000000] ACPI: TCPA 000000008f4d0000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: HEST 000000008f4cf000 000A8 (v01 INTEL S5520UT 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 000000008f3e1000 00030 (v01 INTEL S5520UT 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 000000008f3e0000 00230 (v01 INTEL S5520UT 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 000000008f3df000 00130 (v01 INTEL S5520UT 00000001 INTL 00000001) [ 0.000000] ACPI: XMAR 000000008f3de000 001A8 (v01 INTEL S5520UT 00000001 MSFT 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x66fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0x8c21bfff] [ 0.000000] node 0: [mem 0x100000000-0x66fffffff] [ 0.000000] On node 0 totalpages: 6275495 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1081 pages reserved [ 0.000000] DMA zone: 2834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 553564 pages, LIFO batch:31 [ 0.000000] Normal zone: 89088 pages used for memmap [ 0.000000] Normal zone: 5612544 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x12] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x12 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0x32 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0x14 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0x34 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 12/0x1 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 13/0x21 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 14/0x3 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 15/0x23 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x05] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 16/0x5 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 17/0x25 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 18/0x11 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 19/0x31 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 20/0x13 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 21/0x33 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 22/0x15 ignored. [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 23/0x35 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000 [ 0.000000] smpboot: 24 Processors exceeds NR_CPUS limit of 8 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000008c21c000 - 000000008c2ef000 [ 0.000000] PM: Registered nosave memory: 000000008c2ef000 - 000000008c3df000 [ 0.000000] PM: Registered nosave memory: 000000008c3df000 - 000000008d7df000 [ 0.000000] PM: Registered nosave memory: 000000008d7df000 - 000000008f302000 [ 0.000000] PM: Registered nosave memory: 000000008f302000 - 000000008f34f000 [ 0.000000] PM: Registered nosave memory: 000000008f34f000 - 000000008f3d4000 [ 0.000000] PM: Registered nosave memory: 000000008f3d4000 - 000000008f3de000 [ 0.000000] PM: Registered nosave memory: 000000008f3de000 - 000000008f3e2000 [ 0.000000] PM: Registered nosave memory: 000000008f3e2000 - 000000008f4cf000 [ 0.000000] PM: Registered nosave memory: 000000008f4cf000 - 000000008f500000 [ 0.000000] PM: Registered nosave memory: 000000008f500000 - 0000000090000000 [ 0.000000] PM: Registered nosave memory: 0000000090000000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000 [ 0.000000] PM: Registered nosave memory: 00000000fd000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec90000 [ 0.000000] PM: Registered nosave memory: 00000000fec90000 - 00000000fec91000 [ 0.000000] PM: Registered nosave memory: 00000000fec91000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] e820: [mem 0xb0000000-0xfbffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.3.26502-20130204 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88064f600000 s78080 r8192 d24320 u262144 [ 0.000000] pcpu-alloc: s78080 r8192 d24320 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 8.570118] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6168942 [ 8.570120] Kernel command line: debug panic=9 sysrq=yes showopts log_buf_len=64M console=hvc0 [ 8.570177] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 8.575301] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 8.583181] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 8.585686] __ex_table already sorted, skipping sort [ 8.618817] software IO TLB [mem 0x62d102000-0x631101fff] (64MB) mapped at [ffff88062d102000-ffff880631101fff] [ 8.716651] Memory: 23932616k/27000832k available (6541k kernel code, 1898852k absent, 1169364k reserved, 6150k data, 636k init) [ 8.716739] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 8.716782] Hierarchical RCU implementation. [ 8.716792] NR_IRQS:4352 nr_irqs:1152 16 [ 8.716855] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 8.716858] xen: registering gsi 9 triggering 0 polarity 0 [ 8.716872] xen: --> pirq=9 -> irq=9 (gsi=9) [ 8.716904] xen: acpi sci 9 [ 8.716908] xen: --> pirq=1 -> irq=1 (gsi=1) [ 8.716910] xen: --> pirq=2 -> irq=2 (gsi=2) [ 8.716913] xen: --> pirq=3 -> irq=3 (gsi=3) [ 8.716916] xen: --> pirq=4 -> irq=4 (gsi=4) [ 8.716918] xen: --> pirq=5 -> irq=5 (gsi=5) [ 8.716921] xen: --> pirq=6 -> irq=6 (gsi=6) [ 8.716923] xen: --> pirq=7 -> irq=7 (gsi=7) [ 8.716926] xen: --> pirq=8 -> irq=8 (gsi=8) [ 8.716928] xen: --> pirq=10 -> irq=10 (gsi=10) [ 8.716931] xen: --> pirq=11 -> irq=11 (gsi=11) [ 8.716934] xen: --> pirq=12 -> irq=12 (gsi=12) [ 8.716936] xen: --> pirq=13 -> irq=13 (gsi=13) [ 8.716939] xen: --> pirq=14 -> irq=14 (gsi=14) [ 8.716941] xen: --> pirq=15 -> irq=15 (gsi=15) [ 8.723114] Console: colour VGA+ 80x25 [ 8.723624] console [hvc0] enabled [ 8.723646] Xen: using vcpuop timer interface [ 8.723653] installing Xen timer for CPU 0 [ 8.723682] tsc: Detected 2926.444 MHz processor [ 8.723689] Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.88 BogoMIPS (lpj=11705776) [ 8.723694] pid_max: default: 32768 minimum: 301 [ 8.723734] Mount-cache hash table entries: 256 [ 8.723976] CPU: Physical Processor ID: 0 [ 8.723979] CPU: Processor Core ID: 0 [ 8.723982] mce: CPU supports 2 MCE banks [ 8.723998] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 8.723998] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 8.723998] tlb_flushall_shift: 6 [ 8.724094] Freeing SMP alternatives: 28k freed [ 8.724940] ACPI: Core revision 20120913 [ 8.733214] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 8.733369] installing Xen timer for CPU 1 [ 8.734623] installing Xen timer for CPU 2 [ 8.735820] installing Xen timer for CPU 3 [ 8.737059] installing Xen timer for CPU 4 [ 8.738037] installing Xen timer for CPU 5 [ 8.739017] installing Xen timer for CPU 6 [ 8.740032] installing Xen timer for CPU 7 [ 8.740964] Brought up 8 CPUs [ 8.741540] devtmpfs: initialized [ 8.741942] PM: Registering ACPI NVS region [mem 0x8c21c000-0x8c2eefff] (864256 bytes) [ 8.741960] PM: Registering ACPI NVS region [mem 0x8c3df000-0x8d7defff] (20971520 bytes) [ 8.742195] PM: Registering ACPI NVS region [mem 0x8f3d4000-0x8f3ddfff] (40960 bytes) [ 8.742198] PM: Registering ACPI NVS region [mem 0x8f3e2000-0x8f4cefff] (970752 bytes) [ 8.742250] Grant tables using version 2 layout. [ 8.742263] Grant table initialized [ 8.742297] NET: Registered protocol family 16 [ 8.742988] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 8.742994] ACPI: bus type pci registered [ 8.743193] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000) [ 8.743199] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820 [ 8.787823] PCI: Using configuration type 1 for base access [ 8.788567] bio: create slab at 0 [ 8.788791] ACPI: Added _OSI(Module Device) [ 8.788798] ACPI: Added _OSI(Processor Device) [ 8.788802] ACPI: Added _OSI(3.0 _SCP Extensions) [ 8.788806] ACPI: Added _OSI(Processor Aggregator Device) [ 8.789956] ACPI: EC: Look up EC in DSDT [ 8.805910] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20120913/dsopcode-236) [ 8.805918] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88062cc491b8), AE_AML_BUFFER_LIMIT (20120913/psparse-536) [ 8.806714] ACPI: Interpreter enabled [ 8.806719] ACPI: (supports S0 S1 S5) [ 8.806729] ACPI: Using IOAPIC for interrupt routing [ 8.809807] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 8.810337] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd]) [ 8.810772] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff]) [ 8.810801] PCI host bridge to bus 0000:00 [ 8.810804] pci_bus 0000:00: root bus resource [bus 00-fd] [ 8.810808] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 8.810811] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 8.810814] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 8.810818] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff] [ 8.810821] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfdffffff] [ 8.810824] pci_bus 0000:00: scanning bus [ 8.810845] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000 [ 8.810856] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0xa [ 8.810955] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 8.810962] pci 0000:00:00.0: PME# disabled [ 8.810999] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 8.811047] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.811110] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 8.811116] pci 0000:00:01.0: PME# disabled [ 8.811155] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 8.811200] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.811264] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 8.811270] pci 0000:00:03.0: PME# disabled [ 8.811309] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400 [ 8.811354] pci 0000:00:05.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.811417] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 8.811423] pci 0000:00:05.0: PME# disabled [ 8.811462] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 8.811507] pci 0000:00:07.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.811570] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 8.811576] pci 0000:00:07.0: PME# disabled [ 8.811615] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400 [ 8.811660] pci 0000:00:09.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.811723] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 8.811729] pci 0000:00:09.0: PME# disabled [ 8.811766] pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400 [ 8.811811] pci 0000:00:0a.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.811874] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 8.811880] pci 0000:00:0a.0: PME# disabled [ 8.811917] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000 [ 8.812039] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000 [ 8.812144] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000 [ 8.812271] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000 [ 8.812378] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020 [ 8.812398] pci 0000:00:13.0: reg 10: [mem 0xb1b24000-0xb1b24fff] [ 8.812489] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 8.812496] pci 0000:00:13.0: PME# disabled [ 8.812525] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 8.812645] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 8.812766] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 8.812880] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 8.812980] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020 [ 8.813089] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000 [ 8.813111] pci 0000:00:16.0: reg 10: [mem 0xb1b00000-0xb1b03fff 64bit] [ 8.813239] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000 [ 8.813261] pci 0000:00:16.1: reg 10: [mem 0xb1b04000-0xb1b07fff 64bit] [ 8.813389] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000 [ 8.813417] pci 0000:00:16.2: reg 10: [mem 0xb1b08000-0xb1b0bfff 64bit] [ 8.813546] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000 [ 8.813568] pci 0000:00:16.3: reg 10: [mem 0xb1b0c000-0xb1b0ffff 64bit] [ 8.813696] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000 [ 8.813717] pci 0000:00:16.4: reg 10: [mem 0xb1b10000-0xb1b13fff 64bit] [ 8.813846] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000 [ 8.813868] pci 0000:00:16.5: reg 10: [mem 0xb1b14000-0xb1b17fff 64bit] [ 8.813995] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000 [ 8.814017] pci 0000:00:16.6: reg 10: [mem 0xb1b18000-0xb1b1bfff 64bit] [ 8.814146] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000 [ 8.814168] pci 0000:00:16.7: reg 10: [mem 0xb1b1c000-0xb1b1ffff 64bit] [ 8.814298] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 8.814369] pci 0000:00:1a.0: reg 20: [io 0x30e0-0x30ff] [ 8.814452] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 8.814522] pci 0000:00:1a.1: reg 20: [io 0x30c0-0x30df] [ 8.814605] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 8.814675] pci 0000:00:1a.2: reg 20: [io 0x30a0-0x30bf] [ 8.814772] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 8.814806] pci 0000:00:1a.7: reg 10: [mem 0xb1b22000-0xb1b223ff] [ 8.814949] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 8.814956] pci 0000:00:1a.7: PME# disabled [ 8.814989] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 8.815046] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.815111] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 8.815118] pci 0000:00:1c.0: PME# disabled [ 8.815158] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 8.815214] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.815280] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 8.815286] pci 0000:00:1c.4: PME# disabled [ 8.815321] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 8.815377] pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.815443] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 8.815449] pci 0000:00:1c.5: PME# disabled [ 8.815489] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 8.815559] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 8.815642] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 8.815713] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 8.815796] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 8.815866] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 8.815963] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 8.815997] pci 0000:00:1d.7: reg 10: [mem 0xb1b21000-0xb1b213ff] [ 8.816140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 8.816147] pci 0000:00:1d.7: PME# disabled [ 8.816176] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 8.816229] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x1f [ 8.816290] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 8.816406] pci 0000:00:1f.0: calling ich_force_enable_hpet+0x0/0x1c0 [ 8.816410] pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x68 [ 8.816424] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) [ 8.816430] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 8.816458] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f) [ 8.816536] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 8.816569] pci 0000:00:1f.2: reg 10: [io 0x3108-0x310f] [ 8.816583] pci 0000:00:1f.2: reg 14: [io 0x3114-0x3117] [ 8.816596] pci 0000:00:1f.2: reg 18: [io 0x3100-0x3107] [ 8.816610] pci 0000:00:1f.2: reg 1c: [io 0x3110-0x3113] [ 8.816623] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f] [ 8.816637] pci 0000:00:1f.2: reg 24: [mem 0xb1b20000-0xb1b207ff] [ 8.816717] pci 0000:00:1f.2: PME# supported from D3hot [ 8.816723] pci 0000:00:1f.2: PME# disabled [ 8.816749] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 8.816774] pci 0000:00:1f.3: reg 10: [mem 0xb1b23000-0xb1b230ff 64bit] [ 8.816810] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 8.816856] pci_bus 0000:00: fixups for bus [ 8.816861] pci 0000:00:01.0: scanning [bus 01-03] behind bridge, pass 0 [ 8.816921] pci_bus 0000:01: scanning bus [ 8.816951] pci 0000:01:00.0: [8086:10c9] type 00 class 0x020000 [ 8.816971] pci 0000:01:00.0: reg 10: [mem 0xb1a20000-0xb1a3ffff] [ 8.816998] pci 0000:01:00.0: reg 18: [io 0x2020-0x203f] [ 8.817013] pci 0000:01:00.0: reg 1c: [mem 0xb1ac4000-0xb1ac7fff] [ 8.817122] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 8.817128] pci 0000:01:00.0: PME# disabled [ 8.817174] pci 0000:01:00.0: reg 184: [mem 0xb1a40000-0xb1a43fff 64bit] [ 8.817196] pci 0000:01:00.0: reg 190: [mem 0xb1a60000-0xb1a63fff 64bit] [ 8.817240] pci 0000:01:00.1: [8086:10c9] type 00 class 0x020000 [ 8.817260] pci 0000:01:00.1: reg 10: [mem 0xb1a00000-0xb1a1ffff] [ 8.817287] pci 0000:01:00.1: reg 18: [io 0x2000-0x201f] [ 8.817302] pci 0000:01:00.1: reg 1c: [mem 0xb1ac0000-0xb1ac3fff] [ 8.817410] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 8.817417] pci 0000:01:00.1: PME# disabled [ 8.817455] pci 0000:01:00.1: reg 184: [mem 0xb1a80000-0xb1a83fff 64bit] [ 8.817483] pci 0000:01:00.1: reg 190: [mem 0xb1aa0000-0xb1aa3fff 64bit] [ 8.819001] pci_bus 0000:01: fixups for bus [ 8.819004] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 8.819010] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 8.819016] pci 0000:00:01.0: bridge window [mem 0xb1a00000-0xb1afffff] [ 8.819025] pci_bus 0000:01: bus scan returning with max=01 [ 8.819031] pci 0000:00:03.0: scanning [bus 04-04] behind bridge, pass 0 [ 8.819092] pci_bus 0000:04: scanning bus [ 8.819096] pci_bus 0000:04: fixups for bus [ 8.819098] pci 0000:00:03.0: PCI bridge to [bus 04] [ 8.819112] pci_bus 0000:04: bus scan returning with max=04 [ 8.819118] pci 0000:00:05.0: scanning [bus 05-08] behind bridge, pass 0 [ 8.819177] pci_bus 0000:05: scanning bus [ 8.819197] pci 0000:05:00.0: [111d:806a] type 01 class 0x060400 [ 8.819311] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 8.819319] pci 0000:05:00.0: PME# disabled [ 8.820727] pci_bus 0000:05: fixups for bus [ 8.820745] pci 0000:00:05.0: PCI bridge to [bus 05-08] [ 8.820761] pci 0000:05:00.0: scanning [bus 06-08] behind bridge, pass 0 [ 8.820813] pci_bus 0000:06: scanning bus [ 8.820836] pci 0000:06:02.0: [111d:806a] type 01 class 0x060400 [ 8.820965] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold [ 8.820973] pci 0000:06:02.0: PME# disabled [ 8.821013] pci 0000:06:04.0: [111d:806a] type 01 class 0x060400 [ 8.821141] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold [ 8.821149] pci 0000:06:04.0: PME# disabled [ 8.821211] pci_bus 0000:06: fixups for bus [ 8.821213] pci 0000:05:00.0: PCI bridge to [bus 06-08] [ 8.821238] pci 0000:06:02.0: scanning [bus 07-07] behind bridge, pass 0 [ 8.821300] pci_bus 0000:07: scanning bus [ 8.821305] pci_bus 0000:07: fixups for bus [ 8.821307] pci 0000:06:02.0: PCI bridge to [bus 07] [ 8.821329] pci_bus 0000:07: bus scan returning with max=07 [ 8.821336] pci 0000:06:04.0: scanning [bus 08-08] behind bridge, pass 0 [ 8.821398] pci_bus 0000:08: scanning bus [ 8.821402] pci_bus 0000:08: fixups for bus [ 8.821405] pci 0000:06:04.0: PCI bridge to [bus 08] [ 8.821427] pci_bus 0000:08: bus scan returning with max=08 [ 8.821434] pci 0000:06:02.0: scanning [bus 07-07] behind bridge, pass 1 [ 8.821445] pci 0000:06:04.0: scanning [bus 08-08] behind bridge, pass 1 [ 8.821454] pci_bus 0000:06: bus scan returning with max=08 [ 8.821461] pci 0000:05:00.0: scanning [bus 06-08] behind bridge, pass 1 [ 8.821470] pci_bus 0000:05: bus scan returning with max=08 [ 8.821476] pci 0000:00:07.0: scanning [bus 09-0c] behind bridge, pass 0 [ 8.821542] pci_bus 0000:09: scanning bus [ 8.821562] pci 0000:09:00.0: [111d:806a] type 01 class 0x060400 [ 8.821676] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 8.821683] pci 0000:09:00.0: PME# disabled [ 8.823103] pci_bus 0000:09: fixups for bus [ 8.823106] pci 0000:00:07.0: PCI bridge to [bus 09-0c] [ 8.823122] pci 0000:09:00.0: scanning [bus 0a-0c] behind bridge, pass 0 [ 8.823175] pci_bus 0000:0a: scanning bus [ 8.823197] pci 0000:0a:02.0: [111d:806a] type 01 class 0x060400 [ 8.823326] pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold [ 8.823333] pci 0000:0a:02.0: PME# disabled [ 8.823373] pci 0000:0a:04.0: [111d:806a] type 01 class 0x060400 [ 8.823502] pci 0000:0a:04.0: PME# supported from D0 D3hot D3cold [ 8.823509] pci 0000:0a:04.0: PME# disabled [ 8.823571] pci_bus 0000:0a: fixups for bus [ 8.823573] pci 0000:09:00.0: PCI bridge to [bus 0a-0c] [ 8.823598] pci 0000:0a:02.0: scanning [bus 0b-0b] behind bridge, pass 0 [ 8.823660] pci_bus 0000:0b: scanning bus [ 8.823664] pci_bus 0000:0b: fixups for bus [ 8.823667] pci 0000:0a:02.0: PCI bridge to [bus 0b] [ 8.823689] pci_bus 0000:0b: bus scan returning with max=0b [ 8.823696] pci 0000:0a:04.0: scanning [bus 0c-0c] behind bridge, pass 0 [ 8.823758] pci_bus 0000:0c: scanning bus [ 8.823762] pci_bus 0000:0c: fixups for bus [ 8.823765] pci 0000:0a:04.0: PCI bridge to [bus 0c] [ 8.823787] pci_bus 0000:0c: bus scan returning with max=0c [ 8.823794] pci 0000:0a:02.0: scanning [bus 0b-0b] behind bridge, pass 1 [ 8.823805] pci 0000:0a:04.0: scanning [bus 0c-0c] behind bridge, pass 1 [ 8.823814] pci_bus 0000:0a: bus scan returning with max=0c [ 8.823821] pci 0000:09:00.0: scanning [bus 0a-0c] behind bridge, pass 1 [ 8.823830] pci_bus 0000:09: bus scan returning with max=0c [ 8.823836] pci 0000:00:09.0: scanning [bus 0d-0d] behind bridge, pass 0 [ 8.823922] pci_bus 0000:0d: scanning bus [ 8.823925] pci_bus 0000:0d: fixups for bus [ 8.823928] pci 0000:00:09.0: PCI bridge to [bus 0d] [ 8.823941] pci_bus 0000:0d: bus scan returning with max=0d [ 8.823947] pci 0000:00:0a.0: scanning [bus 0e-0e] behind bridge, pass 0 [ 8.824007] pci_bus 0000:0e: scanning bus [ 8.824010] pci_bus 0000:0e: fixups for bus [ 8.824013] pci 0000:00:0a.0: PCI bridge to [bus 0e] [ 8.824026] pci_bus 0000:0e: bus scan returning with max=0e [ 8.824033] pci 0000:00:1c.0: scanning [bus 0f-0f] behind bridge, pass 0 [ 8.824094] pci_bus 0000:0f: scanning bus [ 8.824117] pci 0000:0f:00.0: [1000:0062] type 00 class 0x010000 [ 8.824147] pci 0000:0f:00.0: reg 10: [mem 0xb1940000-0xb1943fff 64bit] [ 8.824165] pci 0000:0f:00.0: reg 18: [io 0x1000-0x10ff] [ 8.824190] pci 0000:0f:00.0: reg 1c: [mem 0xb1900000-0xb193ffff 64bit] [ 8.824221] pci 0000:0f:00.0: reg 30: [mem 0xfff80000-0xffffffff pref] [ 8.824311] pci 0000:0f:00.0: supports D1 [ 8.833857] pci_bus 0000:0f: fixups for bus [ 8.833866] pci 0000:00:1c.0: PCI bridge to [bus 0f] [ 8.833877] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 8.833889] pci 0000:00:1c.0: bridge window [mem 0xb1900000-0xb19fffff] [ 8.833904] pci_bus 0000:0f: bus scan returning with max=0f [ 8.833917] pci 0000:00:1c.4: scanning [bus 10-10] behind bridge, pass 0 [ 8.833986] pci_bus 0000:10: scanning bus [ 8.834016] pci 0000:10:00.0: [102b:0522] type 00 class 0x030000 [ 8.834045] pci 0000:10:00.0: reg 10: [mem 0xb0000000-0xb0ffffff pref] [ 8.834066] pci 0000:10:00.0: reg 14: [mem 0xb1800000-0xb1803fff] [ 8.834086] pci 0000:10:00.0: reg 18: [mem 0xb1000000-0xb17fffff] [ 8.834159] pci 0000:10:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 8.842079] pci_bus 0000:10: fixups for bus [ 8.842087] pci 0000:00:1c.4: PCI bridge to [bus 10] [ 8.842104] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff] [ 8.842120] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref] [ 8.842127] pci_bus 0000:10: bus scan returning with max=10 [ 8.842141] pci 0000:00:1c.5: scanning [bus 11-11] behind bridge, pass 0 [ 8.842204] pci_bus 0000:11: scanning bus [ 8.842209] pci_bus 0000:11: fixups for bus [ 8.842211] pci 0000:00:1c.5: PCI bridge to [bus 11] [ 8.842227] pci_bus 0000:11: bus scan returning with max=11 [ 8.842233] pci 0000:00:1e.0: scanning [bus 12-12] behind bridge, pass 0 [ 8.842265] pci_bus 0000:12: scanning bus [ 8.842326] pci_bus 0000:12: fixups for bus [ 8.842329] pci 0000:00:1e.0: PCI bridge to [bus 12] (subtractive decode) [ 8.842345] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 8.842348] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 8.842352] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 8.842356] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfedfffff] (subtractive decode) [ 8.842359] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfdffffff] (subtractive decode) [ 8.842363] pci_bus 0000:12: bus scan returning with max=12 [ 8.842370] pci 0000:00:01.0: scanning [bus 01-03] behind bridge, pass 1 [ 8.842379] pci 0000:00:03.0: scanning [bus 04-04] behind bridge, pass 1 [ 8.842387] pci 0000:00:05.0: scanning [bus 05-08] behind bridge, pass 1 [ 8.842396] pci 0000:00:07.0: scanning [bus 09-0c] behind bridge, pass 1 [ 8.842405] pci 0000:00:09.0: scanning [bus 0d-0d] behind bridge, pass 1 [ 8.842414] pci 0000:00:0a.0: scanning [bus 0e-0e] behind bridge, pass 1 [ 8.842424] pci 0000:00:1c.0: scanning [bus 0f-0f] behind bridge, pass 1 [ 8.842433] pci 0000:00:1c.4: scanning [bus 10-10] behind bridge, pass 1 [ 8.842443] pci 0000:00:1c.5: scanning [bus 11-11] behind bridge, pass 1 [ 8.842452] pci 0000:00:1e.0: scanning [bus 12-12] behind bridge, pass 1 [ 8.842460] pci_bus 0000:00: bus scan returning with max=12 [ 8.842463] pci_bus 0000:00: on NUMA node 0 [ 8.842468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.871220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT] [ 8.871256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP3._PRT] [ 8.871282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP5._PRT] [ 8.871307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT] [ 8.871334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP9._PRT] [ 8.871369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRPA._PRT] [ 8.871411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 8.871439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 8.871521] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 8.871589] pci0000:00: ACPI _OSC control (0x1d) granted [ 8.879474] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 8.879522] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 8.879567] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 8.879611] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 8.879654] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.879700] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.879745] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.879790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.879821] xen/balloon: Initialising balloon driver. [ 8.881103] xen-balloon: Initialising balloon driver. [ 8.881327] vgaarb: device added: PCI:0000:10:00.0,decodes=io+mem,owns=io+mem,locks=none [ 8.881335] vgaarb: loaded [ 8.881339] vgaarb: bridge control possible 0000:10:00.0 [ 8.881410] SCSI subsystem initialized [ 8.881415] ACPI: bus type scsi registered [ 8.881674] libata version 3.00 loaded. [ 8.881704] ACPI: bus type usb registered [ 8.881729] usbcore: registered new interface driver usbfs [ 8.881737] usbcore: registered new interface driver hub [ 8.881892] usbcore: registered new device driver usb [ 8.881937] PCI: Using ACPI for IRQ routing [ 8.893174] PCI: Discovered peer bus fe [ 8.893177] PCI: root bus fe: using default resources [ 8.893180] PCI: Probing PCI hardware (bus fe) [ 8.893199] PCI host bridge to bus 0000:fe [ 8.893202] pci_bus 0000:fe: root bus resource [io 0x0000-0xffff] [ 8.893206] pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff] [ 8.893209] pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff] [ 8.893213] pci_bus 0000:fe: scanning bus [ 8.893222] pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000 [ 8.893228] pci 0000:fe:00.0: calling quirk_mmio_always_on+0x0/0xa [ 8.893280] pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000 [ 8.893284] pci 0000:fe:00.1: calling quirk_mmio_always_on+0x0/0xa [ 8.893342] pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000 [ 8.893346] pci 0000:fe:02.0: calling quirk_mmio_always_on+0x0/0xa [ 8.893396] pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000 [ 8.893400] pci 0000:fe:02.1: calling quirk_mmio_always_on+0x0/0xa [ 8.893452] pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000 [ 8.893456] pci 0000:fe:02.2: calling quirk_mmio_always_on+0x0/0xa [ 8.893505] pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000 [ 8.893510] pci 0000:fe:02.3: calling quirk_mmio_always_on+0x0/0xa [ 8.893559] pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000 [ 8.893563] pci 0000:fe:02.4: calling quirk_mmio_always_on+0x0/0xa [ 8.893613] pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000 [ 8.893617] pci 0000:fe:02.5: calling quirk_mmio_always_on+0x0/0xa [ 8.893669] pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000 [ 8.893673] pci 0000:fe:03.0: calling quirk_mmio_always_on+0x0/0xa [ 8.893723] pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000 [ 8.893727] pci 0000:fe:03.1: calling quirk_mmio_always_on+0x0/0xa [ 8.893776] pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000 [ 8.893781] pci 0000:fe:03.2: calling quirk_mmio_always_on+0x0/0xa [ 8.893831] pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000 [ 8.893835] pci 0000:fe:03.4: calling quirk_mmio_always_on+0x0/0xa [ 8.893890] pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000 [ 8.893894] pci 0000:fe:04.0: calling quirk_mmio_always_on+0x0/0xa [ 8.893944] pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000 [ 8.893948] pci 0000:fe:04.1: calling quirk_mmio_always_on+0x0/0xa [ 8.893997] pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000 [ 8.894001] pci 0000:fe:04.2: calling quirk_mmio_always_on+0x0/0xa [ 8.894051] pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000 [ 8.894055] pci 0000:fe:04.3: calling quirk_mmio_always_on+0x0/0xa [ 8.894110] pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000 [ 8.894114] pci 0000:fe:05.0: calling quirk_mmio_always_on+0x0/0xa [ 8.894163] pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000 [ 8.894167] pci 0000:fe:05.1: calling quirk_mmio_always_on+0x0/0xa [ 8.894217] pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000 [ 8.894221] pci 0000:fe:05.2: calling quirk_mmio_always_on+0x0/0xa [ 8.894271] pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000 [ 8.894275] pci 0000:fe:05.3: calling quirk_mmio_always_on+0x0/0xa [ 8.894331] pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000 [ 8.894335] pci 0000:fe:06.0: calling quirk_mmio_always_on+0x0/0xa [ 8.894387] pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000 [ 8.894394] pci 0000:fe:06.1: calling quirk_mmio_always_on+0x0/0xa [ 8.894447] pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000 [ 8.894451] pci 0000:fe:06.2: calling quirk_mmio_always_on+0x0/0xa [ 8.894501] pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000 [ 8.894505] pci 0000:fe:06.3: calling quirk_mmio_always_on+0x0/0xa [ 8.894584] pci_bus 0000:fe: fixups for bus [ 8.894587] pci_bus 0000:fe: bus scan returning with max=fe [ 8.894591] pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe [ 8.894956] PCI: Discovered peer bus ff [ 8.894959] PCI: root bus ff: using default resources [ 8.894961] PCI: Probing PCI hardware (bus ff) [ 8.894977] PCI host bridge to bus 0000:ff [ 8.894980] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 8.894984] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff] [ 8.894987] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 8.894991] pci_bus 0000:ff: scanning bus [ 8.894999] pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000 [ 8.895004] pci 0000:ff:00.0: calling quirk_mmio_always_on+0x0/0xa [ 8.895053] pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000 [ 8.895057] pci 0000:ff:00.1: calling quirk_mmio_always_on+0x0/0xa [ 8.895120] pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000 [ 8.895124] pci 0000:ff:02.0: calling quirk_mmio_always_on+0x0/0xa [ 8.895172] pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000 [ 8.895176] pci 0000:ff:02.1: calling quirk_mmio_always_on+0x0/0xa [ 8.895226] pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000 [ 8.895230] pci 0000:ff:02.2: calling quirk_mmio_always_on+0x0/0xa [ 8.895277] pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000 [ 8.895281] pci 0000:ff:02.3: calling quirk_mmio_always_on+0x0/0xa [ 8.895329] pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000 [ 8.895333] pci 0000:ff:02.4: calling quirk_mmio_always_on+0x0/0xa [ 8.895380] pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000 [ 8.895384] pci 0000:ff:02.5: calling quirk_mmio_always_on+0x0/0xa [ 8.895434] pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000 [ 8.895438] pci 0000:ff:03.0: calling quirk_mmio_always_on+0x0/0xa [ 8.895486] pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000 [ 8.895490] pci 0000:ff:03.1: calling quirk_mmio_always_on+0x0/0xa [ 8.895537] pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000 [ 8.895549] pci 0000:ff:03.2: calling quirk_mmio_always_on+0x0/0xa [ 8.895598] pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000 [ 8.895602] pci 0000:ff:03.4: calling quirk_mmio_always_on+0x0/0xa [ 8.895655] pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000 [ 8.895658] pci 0000:ff:04.0: calling quirk_mmio_always_on+0x0/0xa [ 8.895706] pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000 [ 8.895710] pci 0000:ff:04.1: calling quirk_mmio_always_on+0x0/0xa [ 8.895758] pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000 [ 8.895762] pci 0000:ff:04.2: calling quirk_mmio_always_on+0x0/0xa [ 8.895809] pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000 [ 8.895813] pci 0000:ff:04.3: calling quirk_mmio_always_on+0x0/0xa [ 8.895865] pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000 [ 8.895869] pci 0000:ff:05.0: calling quirk_mmio_always_on+0x0/0xa [ 8.895917] pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000 [ 8.895921] pci 0000:ff:05.1: calling quirk_mmio_always_on+0x0/0xa [ 8.895968] pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000 [ 8.895972] pci 0000:ff:05.2: calling quirk_mmio_always_on+0x0/0xa [ 8.896020] pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000 [ 8.896024] pci 0000:ff:05.3: calling quirk_mmio_always_on+0x0/0xa [ 8.896078] pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000 [ 8.896082] pci 0000:ff:06.0: calling quirk_mmio_always_on+0x0/0xa [ 8.896130] pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000 [ 8.896134] pci 0000:ff:06.1: calling quirk_mmio_always_on+0x0/0xa [ 8.896182] pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000 [ 8.896186] pci 0000:ff:06.2: calling quirk_mmio_always_on+0x0/0xa [ 8.896233] pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000 [ 8.896237] pci 0000:ff:06.3: calling quirk_mmio_always_on+0x0/0xa [ 8.896312] pci_bus 0000:ff: fixups for bus [ 8.896315] pci_bus 0000:ff: bus scan returning with max=ff [ 8.896318] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 8.896670] PCI: pci_cache_line_size set to 64 bytes [ 8.896697] pci 0000:00:13.0: BAR 0: reserving [mem 0xb1b24000-0xb1b24fff flags 0x40200] (d=0, p=0) [ 8.896711] pci 0000:00:16.0: BAR 0: reserving [mem 0xb1b00000-0xb1b03fff flags 0x140204] (d=0, p=0) [ 8.896717] pci 0000:00:16.1: BAR 0: reserving [mem 0xb1b04000-0xb1b07fff flags 0x140204] (d=0, p=0) [ 8.896723] pci 0000:00:16.2: BAR 0: reserving [mem 0xb1b08000-0xb1b0bfff flags 0x140204] (d=0, p=0) [ 8.896729] pci 0000:00:16.3: BAR 0: reserving [mem 0xb1b0c000-0xb1b0ffff flags 0x140204] (d=0, p=0) [ 8.896735] pci 0000:00:16.4: BAR 0: reserving [mem 0xb1b10000-0xb1b13fff flags 0x140204] (d=0, p=0) [ 8.896741] pci 0000:00:16.5: BAR 0: reserving [mem 0xb1b14000-0xb1b17fff flags 0x140204] (d=0, p=0) [ 8.896746] pci 0000:00:16.6: BAR 0: reserving [mem 0xb1b18000-0xb1b1bfff flags 0x140204] (d=0, p=0) [ 8.896752] pci 0000:00:16.7: BAR 0: reserving [mem 0xb1b1c000-0xb1b1ffff flags 0x140204] (d=0, p=0) [ 8.896759] pci 0000:00:1a.0: BAR 4: reserving [io 0x30e0-0x30ff flags 0x40101] (d=0, p=0) [ 8.896764] pci 0000:00:1a.1: BAR 4: reserving [io 0x30c0-0x30df flags 0x40101] (d=0, p=0) [ 8.896770] pci 0000:00:1a.2: BAR 4: reserving [io 0x30a0-0x30bf flags 0x40101] (d=0, p=0) [ 8.896776] pci 0000:00:1a.7: BAR 0: reserving [mem 0xb1b22000-0xb1b223ff flags 0x40200] (d=0, p=0) [ 8.896788] pci 0000:00:1d.0: BAR 4: reserving [io 0x3080-0x309f flags 0x40101] (d=0, p=0) [ 8.896793] pci 0000:00:1d.1: BAR 4: reserving [io 0x3060-0x307f flags 0x40101] (d=0, p=0) [ 8.896799] pci 0000:00:1d.2: BAR 4: reserving [io 0x3040-0x305f flags 0x40101] (d=0, p=0) [ 8.896805] pci 0000:00:1d.7: BAR 0: reserving [mem 0xb1b21000-0xb1b213ff flags 0x40200] (d=0, p=0) [ 8.896815] pci 0000:00:1f.2: BAR 0: reserving [io 0x3108-0x310f flags 0x40101] (d=0, p=0) [ 8.896819] pci 0000:00:1f.2: BAR 1: reserving [io 0x3114-0x3117 flags 0x40101] (d=0, p=0) [ 8.896823] pci 0000:00:1f.2: BAR 2: reserving [io 0x3100-0x3107 flags 0x40101] (d=0, p=0) [ 8.896827] pci 0000:00:1f.2: BAR 3: reserving [io 0x3110-0x3113 flags 0x40101] (d=0, p=0) [ 8.896830] pci 0000:00:1f.2: BAR 4: reserving [io 0x3020-0x303f flags 0x40101] (d=0, p=0) [ 8.896834] pci 0000:00:1f.2: BAR 5: reserving [mem 0xb1b20000-0xb1b207ff flags 0x40200] (d=0, p=0) [ 8.896840] pci 0000:00:1f.3: BAR 0: reserving [mem 0xb1b23000-0xb1b230ff flags 0x140204] (d=0, p=0) [ 8.896845] pci 0000:00:1f.3: BAR 4: reserving [io 0x3000-0x301f flags 0x40101] (d=0, p=0) [ 8.896850] pci 0000:01:00.0: BAR 0: reserving [mem 0xb1a20000-0xb1a3ffff flags 0x40200] (d=0, p=0) [ 8.896855] pci 0000:01:00.0: BAR 2: reserving [io 0x2020-0x203f flags 0x40101] (d=0, p=0) [ 8.896858] pci 0000:01:00.0: BAR 3: reserving [mem 0xb1ac4000-0xb1ac7fff flags 0x40200] (d=0, p=0) [ 8.896863] pci 0000:01:00.0: BAR 7: reserving [mem 0xb1a40000-0xb1a5ffff flags 0x140204] (d=0, p=0) [ 8.896867] pci 0000:01:00.0: BAR 10: reserving [mem 0xb1a60000-0xb1a7ffff flags 0x140204] (d=0, p=0) [ 8.896873] pci 0000:01:00.1: BAR 0: reserving [mem 0xb1a00000-0xb1a1ffff flags 0x40200] (d=0, p=0) [ 8.896877] pci 0000:01:00.1: BAR 2: reserving [io 0x2000-0x201f flags 0x40101] (d=0, p=0) [ 8.896881] pci 0000:01:00.1: BAR 3: reserving [mem 0xb1ac0000-0xb1ac3fff flags 0x40200] (d=0, p=0) [ 8.896885] pci 0000:01:00.1: BAR 7: reserving [mem 0xb1a80000-0xb1a9ffff flags 0x140204] (d=0, p=0) [ 8.896889] pci 0000:01:00.1: BAR 10: reserving [mem 0xb1aa0000-0xb1abffff flags 0x140204] (d=0, p=0) [ 8.896908] pci 0000:0f:00.0: BAR 0: reserving [mem 0xb1940000-0xb1943fff flags 0x140204] (d=0, p=0) [ 8.896912] pci 0000:0f:00.0: BAR 2: reserving [io 0x1000-0x10ff flags 0x40101] (d=0, p=0) [ 8.896916] pci 0000:0f:00.0: BAR 3: reserving [mem 0xb1900000-0xb193ffff flags 0x140204] (d=0, p=0) [ 8.896923] pci 0000:10:00.0: BAR 0: reserving [mem 0xb0000000-0xb0ffffff flags 0x42208] (d=0, p=0) [ 8.896927] pci 0000:10:00.0: BAR 1: reserving [mem 0xb1800000-0xb1803fff flags 0x40200] (d=0, p=0) [ 8.896931] pci 0000:10:00.0: BAR 2: reserving [mem 0xb1000000-0xb17fffff flags 0x40200] (d=0, p=0) [ 8.897136] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 8.897139] e820: reserve RAM buffer [mem 0x8c21c000-0x8fffffff] [ 8.897249] Switching to clocksource xen [ 8.897508] pnp: PnP ACPI init [ 8.897518] ACPI: bus type pnp registered [ 8.897745] pnp 00:00: [bus 00-fd] [ 8.897749] pnp 00:00: [io 0x0cf8-0x0cff] [ 8.897752] pnp 00:00: [io 0x0000-0x0cf7 window] [ 8.897755] pnp 00:00: [io 0x0d00-0xffff window] [ 8.897758] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 8.897761] pnp 00:00: [mem 0x000c4000-0x000cbfff window] [ 8.897764] pnp 00:00: [mem 0xfed40000-0xfedfffff window] [ 8.897767] pnp 00:00: [mem 0xb0000000-0xfdffffff window] [ 8.897770] pnp 00:00: [mem 0x00000000 window] [ 8.897794] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 8.897802] pnp 00:01: [mem 0xfec00000-0xfecfffff] [ 8.897817] pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active) [ 8.897942] pnp 00:02: [io 0x0000-0x000f] [ 8.897945] pnp 00:02: [io 0x0081-0x0083] [ 8.897948] pnp 00:02: [io 0x0087] [ 8.897950] pnp 00:02: [io 0x0089-0x008b] [ 8.897953] pnp 00:02: [io 0x008f] [ 8.897955] pnp 00:02: [io 0x00c0-0x00df] [ 8.897958] pnp 00:02: [dma 4] [ 8.897974] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 8.897982] pnp 00:03: [io 0x0070-0x0071] [ 8.897984] pnp 00:03: [io 0x0074-0x0077] [ 8.897988] xen: registering gsi 8 triggering 1 polarity 0 [ 8.898021] pnp 00:03: [irq 8] [ 8.898035] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 8.898044] pnp 00:04: [io 0x00f0] [ 8.898046] xen: registering gsi 13 triggering 1 polarity 0 [ 8.898075] pnp 00:04: [irq 13] [ 8.898092] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 8.898100] pnp 00:05: [io 0x0061] [ 8.898114] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 8.898143] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 8.898163] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 8.898173] pnp 00:07: [io 0x0500-0x057f] [ 8.898175] pnp 00:07: [io 0x0400-0x047f] [ 8.898178] pnp 00:07: [io 0x0092] [ 8.898180] pnp 00:07: [io 0x0010-0x001f] [ 8.898182] pnp 00:07: [io 0x0072-0x0073] [ 8.898185] pnp 00:07: [io 0x0080] [ 8.898187] pnp 00:07: [io 0x0084-0x0086] [ 8.898190] pnp 00:07: [io 0x0088] [ 8.898192] pnp 00:07: [io 0x008c-0x008e] [ 8.898194] pnp 00:07: [io 0x0090-0x009f] [ 8.898197] pnp 00:07: [io 0x0800-0x081f] [ 8.898199] pnp 00:07: [io 0x0ca2-0x0ca3] [ 8.898202] pnp 00:07: [io 0x0600-0x061f] [ 8.898204] pnp 00:07: [io 0x0880-0x0883] [ 8.898206] pnp 00:07: [io 0x0ca4-0x0ca5] [ 8.898209] pnp 00:07: [mem 0xfed1c000-0xfed3fffe] [ 8.898211] pnp 00:07: [mem 0xff000000-0xffffffff] [ 8.898214] pnp 00:07: [mem 0xfee00000-0xfeefffff] [ 8.898218] pnp 00:07: [mem 0xfe900000-0xfe90001f] [ 8.898221] pnp 00:07: [mem 0xfea00000-0xfea0001f] [ 8.898224] pnp 00:07: [mem 0xfed1b000-0xfed1bfff] [ 8.898275] system 00:07: [io 0x0500-0x057f] has been reserved [ 8.898279] system 00:07: [io 0x0400-0x047f] has been reserved [ 8.898282] system 00:07: [io 0x0800-0x081f] has been reserved [ 8.898285] system 00:07: [io 0x0ca2-0x0ca3] has been reserved [ 8.898289] system 00:07: [io 0x0600-0x061f] has been reserved [ 8.898292] system 00:07: [io 0x0880-0x0883] has been reserved [ 8.898295] system 00:07: [io 0x0ca4-0x0ca5] has been reserved [ 8.898299] system 00:07: [mem 0xfed1c000-0xfed3fffe] could not be reserved [ 8.898303] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 8.898306] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 8.898310] system 00:07: [mem 0xfe900000-0xfe90001f] has been reserved [ 8.898313] system 00:07: [mem 0xfea00000-0xfea0001f] has been reserved [ 8.898316] system 00:07: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 8.898320] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 8.898436] pnp 00:08: [io 0x02f8-0x02ff] [ 8.898440] xen: registering gsi 3 triggering 1 polarity 0 [ 8.898469] pnp 00:08: [irq 3] [ 8.898513] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 8.898535] pnp 00:09: [mem 0xfed40000-0xfed44fff] [ 8.898551] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active) [ 8.898576] pnp 00:0a: [io 0x0ca2] [ 8.898579] pnp 00:0a: [io 0x0ca3] [ 8.898594] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001 (active) [ 8.898626] pnp: PnP ACPI: found 11 devices [ 8.898652] ACPI: ACPI bus type pnp unregistered [ 8.905571] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 8.905583] pci 0000:0f:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref] [ 8.905588] pci 0000:10:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 8.905733] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 0f] add_size 200000 [ 8.905747] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000 [ 8.905761] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 11] add_size 1000 [ 8.905765] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000 [ 8.905769] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000 [ 8.905802] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 8.905806] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 8.905810] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 8.905814] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 8.905818] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 8.905824] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb1c00000-0xb1efffff pref] [ 8.905828] pci 0000:00:1c.5: BAR 14: assigned [mem 0xb1f00000-0xb20fffff] [ 8.905833] pci 0000:00:1c.5: BAR 15: assigned [mem 0xb2100000-0xb22fffff 64bit pref] [ 8.905837] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 8.905841] pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff] [ 8.905845] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 8.905850] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 8.905858] pci 0000:00:01.0: bridge window [mem 0xb1a00000-0xb1afffff] [ 8.905869] pci 0000:00:03.0: PCI bridge to [bus 04] [ 8.905884] pci 0000:06:02.0: PCI bridge to [bus 07] [ 8.905905] pci 0000:06:04.0: PCI bridge to [bus 08] [ 8.905925] pci 0000:05:00.0: PCI bridge to [bus 06-08] [ 8.905946] pci 0000:00:05.0: PCI bridge to [bus 05-08] [ 8.905961] pci 0000:0a:02.0: PCI bridge to [bus 0b] [ 8.905981] pci 0000:0a:04.0: PCI bridge to [bus 0c] [ 8.906002] pci 0000:09:00.0: PCI bridge to [bus 0a-0c] [ 8.906022] pci 0000:00:07.0: PCI bridge to [bus 09-0c] [ 8.906037] pci 0000:00:09.0: PCI bridge to [bus 0d] [ 8.906052] pci 0000:00:0a.0: PCI bridge to [bus 0e] [ 8.906068] pci 0000:0f:00.0: BAR 6: assigned [mem 0xb1c00000-0xb1c7ffff pref] [ 8.906071] pci 0000:00:1c.0: PCI bridge to [bus 0f] [ 8.906076] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 8.906084] pci 0000:00:1c.0: bridge window [mem 0xb1900000-0xb19fffff] [ 8.906090] pci 0000:00:1c.0: bridge window [mem 0xb1c00000-0xb1efffff pref] [ 8.906100] pci 0000:10:00.0: BAR 6: assigned [mem 0xb1810000-0xb181ffff pref] [ 8.906103] pci 0000:00:1c.4: PCI bridge to [bus 10] [ 8.906108] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 8.906115] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff] [ 8.906122] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref] [ 8.906131] pci 0000:00:1c.5: PCI bridge to [bus 11] [ 8.906136] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] [ 8.906143] pci 0000:00:1c.5: bridge window [mem 0xb1f00000-0xb20fffff] [ 8.906150] pci 0000:00:1c.5: bridge window [mem 0xb2100000-0xb22fffff 64bit pref] [ 8.906159] pci 0000:00:1e.0: PCI bridge to [bus 12] [ 8.906182] xen: registering gsi 28 triggering 0 polarity 1 [ 8.906196] xen: --> pirq=28 -> irq=28 (gsi=28) [ 8.906232] xen: registering gsi 24 triggering 0 polarity 1 [ 8.906238] xen: --> pirq=24 -> irq=24 (gsi=24) [ 8.906270] xen: registering gsi 26 triggering 0 polarity 1 [ 8.906276] xen: --> pirq=26 -> irq=26 (gsi=26) [ 8.906326] xen: registering gsi 30 triggering 0 polarity 1 [ 8.906332] xen: --> pirq=30 -> irq=30 (gsi=30) [ 8.906381] xen: registering gsi 32 triggering 0 polarity 1 [ 8.906387] xen: --> pirq=32 -> irq=32 (gsi=32) [ 8.906419] xen: registering gsi 33 triggering 0 polarity 1 [ 8.906425] xen: --> pirq=33 -> irq=33 (gsi=33) [ 8.906458] xen: registering gsi 16 triggering 0 polarity 1 [ 8.906466] xen: --> pirq=16 -> irq=16 (gsi=16) [ 8.906498] xen: registering gsi 16 triggering 0 polarity 1 [ 8.906501] Already setup the GSI :16 [ 8.906508] xen: registering gsi 17 triggering 0 polarity 1 [ 8.906513] xen: --> pirq=17 -> irq=17 (gsi=17) [ 8.906549] pci 0000:00:1e.0: setting latency timer to 64 [ 8.906555] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 8.906558] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 8.906561] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 8.906564] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfedfffff] [ 8.906568] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xfdffffff] [ 8.906571] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 8.906574] pci_bus 0000:01: resource 1 [mem 0xb1a00000-0xb1afffff] [ 8.906578] pci_bus 0000:0f: resource 0 [io 0x1000-0x1fff] [ 8.906581] pci_bus 0000:0f: resource 1 [mem 0xb1900000-0xb19fffff] [ 8.906584] pci_bus 0000:0f: resource 2 [mem 0xb1c00000-0xb1efffff pref] [ 8.906587] pci_bus 0000:10: resource 0 [io 0x4000-0x4fff] [ 8.906590] pci_bus 0000:10: resource 1 [mem 0xb1000000-0xb18fffff] [ 8.906594] pci_bus 0000:10: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref] [ 8.906597] pci_bus 0000:11: resource 0 [io 0x5000-0x5fff] [ 8.906600] pci_bus 0000:11: resource 1 [mem 0xb1f00000-0xb20fffff] [ 8.906603] pci_bus 0000:11: resource 2 [mem 0xb2100000-0xb22fffff 64bit pref] [ 8.906607] pci_bus 0000:12: resource 4 [io 0x0000-0x0cf7] [ 8.906609] pci_bus 0000:12: resource 5 [io 0x0d00-0xffff] [ 8.906612] pci_bus 0000:12: resource 6 [mem 0x000a0000-0x000bffff] [ 8.906615] pci_bus 0000:12: resource 7 [mem 0xfed40000-0xfedfffff] [ 8.906618] pci_bus 0000:12: resource 8 [mem 0xb0000000-0xfdffffff] [ 8.906622] pci_bus 0000:fe: resource 4 [io 0x0000-0xffff] [ 8.906624] pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff] [ 8.906628] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 8.906631] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff] [ 8.906665] NET: Registered protocol family 2 [ 8.906794] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 8.907486] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 8.907663] TCP: Hash tables configured (established 262144 bind 65536) [ 8.907693] TCP: reno registered [ 8.907700] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 8.907798] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 8.907939] NET: Registered protocol family 1 [ 8.908037] RPC: Registered named UNIX socket transport module. [ 8.908042] RPC: Registered udp transport module. [ 8.908045] RPC: Registered tcp transport module. [ 8.908047] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.908110] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908118] xen: registering gsi 19 triggering 0 polarity 1 [ 8.908128] xen: --> pirq=19 -> irq=19 (gsi=19) [ 8.908182] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908188] xen: registering gsi 19 triggering 0 polarity 1 [ 8.908191] Already setup the GSI :19 [ 8.908217] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908222] xen: registering gsi 19 triggering 0 polarity 1 [ 8.908225] Already setup the GSI :19 [ 8.908250] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908257] xen: registering gsi 19 triggering 0 polarity 1 [ 8.908259] Already setup the GSI :19 [ 8.908413] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908420] xen: registering gsi 16 triggering 0 polarity 1 [ 8.908422] Already setup the GSI :16 [ 8.908448] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908453] xen: registering gsi 16 triggering 0 polarity 1 [ 8.908455] Already setup the GSI :16 [ 8.908481] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908486] xen: registering gsi 16 triggering 0 polarity 1 [ 8.908489] Already setup the GSI :16 [ 8.908514] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x6eb [ 8.908520] xen: registering gsi 16 triggering 0 polarity 1 [ 8.908523] Already setup the GSI :16 [ 8.908708] pci 0000:01:00.0: calling quirk_e100_interrupt+0x0/0x18d [ 8.908716] pci 0000:01:00.1: calling quirk_e100_interrupt+0x0/0x18d [ 8.908740] pci 0000:10:00.0: calling pci_fixup_video+0x0/0xc1 [ 8.908747] pci 0000:10:00.0: Boot video device [ 8.908836] PCI: CLS 64 bytes, default 64 [ 8.908869] Unpacking initramfs... [ 8.920521] Freeing initrd memory: 14764k freed [ 8.926621] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 8.926956] NFS: Registering the id_resolver key type [ 8.926969] Key type id_resolver registered [ 8.926971] Key type id_legacy registered [ 8.926984] NTFS driver 2.1.30 [Flags: R/O]. [ 8.927096] fuse init (API version 7.20) [ 8.927337] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 8.928200] Btrfs loaded [ 8.928212] msgmni has been set to 32768 [ 8.928580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 8.928585] io scheduler noop registered [ 8.928587] io scheduler deadline registered [ 8.928592] io scheduler cfq registered (default) [ 8.931221] aer 0000:00:01.0:pcie02: service driver aer loaded [ 8.931259] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.931313] aer 0000:00:05.0:pcie02: service driver aer loaded [ 8.931364] aer 0000:00:07.0:pcie02: service driver aer loaded [ 8.931401] aer 0000:00:09.0:pcie02: service driver aer loaded [ 8.931439] aer 0000:00:0a.0:pcie02: service driver aer loaded [ 8.931456] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 8.931459] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 8.931462] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 8.931469] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 8.931480] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 8.931486] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 8.931497] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 8.931500] pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 8.931504] pcieport 0000:06:02.0: Signaling PME through PCIe PME interrupt [ 8.931507] pcieport 0000:06:04.0: Signaling PME through PCIe PME interrupt [ 8.931513] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 8.931526] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 8.931529] pcieport 0000:09:00.0: Signaling PME through PCIe PME interrupt [ 8.931532] pcieport 0000:0a:02.0: Signaling PME through PCIe PME interrupt [ 8.931535] pcieport 0000:0a:04.0: Signaling PME through PCIe PME interrupt [ 8.931542] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 8.931553] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 8.931559] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 8.931570] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt [ 8.931576] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded [ 8.931606] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 8.931610] pci 0000:0f:00.0: Signaling PME through PCIe PME interrupt [ 8.931616] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 8.931647] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 8.931651] pci 0000:10:00.0: Signaling PME through PCIe PME interrupt [ 8.931657] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 8.931686] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 8.931694] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 8.931798] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 8.931806] ACPI: Sleep Button [SLPB] [ 8.931832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.931836] ACPI: Power Button [PWRF] [ 8.931901] ACPI: Requesting acpi_cpufreq [ 8.932364] Monitor-Mwait will be used to enter C-1 state [ 8.932422] Monitor-Mwait will be used to enter C-3 state [ 8.936323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 8.956986] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.957582] hpet_acpi_add: no address or irqs in _CRS [ 8.957661] Non-volatile memory driver v1.3 [ 8.957664] Linux agpgart interface v0.103 [ 8.957780] ahci 0000:00:1f.2: version 3.0 [ 8.957793] xen: registering gsi 18 triggering 0 polarity 1 [ 8.957805] xen: --> pirq=18 -> irq=18 (gsi=18) [ 8.958019] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x3f [ 8.958084] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 8.958090] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 8.958097] ahci 0000:00:1f.2: setting latency timer to 64 [ 8.958954] scsi0 : ahci [ 8.959091] scsi1 : ahci [ 8.959235] scsi2 : ahci [ 8.959404] scsi3 : ahci [ 8.959589] scsi4 : ahci [ 8.959726] scsi5 : ahci [ 8.959753] ata1: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20100 irq 128 [ 8.959758] ata2: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20180 irq 128 [ 8.959761] ata3: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20200 irq 128 [ 8.959765] ata4: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20280 irq 128 [ 8.959769] ata5: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20300 irq 128 [ 8.959773] ata6: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20380 irq 128 [ 8.959833] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 8.959836] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 8.959862] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k [ 8.959865] igb: Copyright (c) 2007-2012 Intel Corporation. [ 8.959882] xen: registering gsi 40 triggering 0 polarity 1 [ 8.959891] xen: --> pirq=40 -> irq=40 (gsi=40) [ 8.960770] igb 0000:01:00.0: PHY reset is blocked due to SOL/IDER session. [ 9.006468] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 9.006474] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:15:17:da:f9:e4 [ 9.006551] igb 0000:01:00.0: eth0: PBA No: 0080FF-0FF [ 9.006554] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 9.006566] xen: registering gsi 28 triggering 0 polarity 1 [ 9.006570] Already setup the GSI :28 [ 9.197779] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 9.197784] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:15:17:da:f9:e5 [ 9.197861] igb 0000:01:00.1: eth1: PBA No: 0080FF-0FF [ 9.197864] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 9.197882] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.1-k [ 9.197885] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 9.197898] sky2: driver version 1.30 [ 9.198251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.198279] xen: registering gsi 19 triggering 0 polarity 1 [ 9.198289] Already setup the GSI :19 [ 9.198305] ehci_hcd 0000:00:1a.7: enabling bus mastering [ 9.198312] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 9.198317] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 9.198324] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 9.198344] ehci_hcd 0000:00:1a.7: debug port 1 [ 9.202402] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 9.202459] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xb1b22000 [ 9.213520] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 9.213578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.213585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.213591] usb usb1: Product: EHCI Host Controller [ 9.213597] usb usb1: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 ehci_hcd [ 9.213604] usb usb1: SerialNumber: 0000:00:1a.7 [ 9.213820] hub 1-0:1.0: USB hub found [ 9.213830] hub 1-0:1.0: 6 ports detected [ 9.213915] xen: registering gsi 16 triggering 0 polarity 1 [ 9.213919] Already setup the GSI :16 [ 9.213934] ehci_hcd 0000:00:1d.7: enabling bus mastering [ 9.213941] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 9.213946] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 9.213951] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 9.213968] ehci_hcd 0000:00:1d.7: debug port 1 [ 9.217965] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 9.218021] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb1b21000 [ 9.229529] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 9.229576] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.229583] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.229589] usb usb2: Product: EHCI Host Controller [ 9.229594] usb usb2: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 ehci_hcd [ 9.229601] usb usb2: SerialNumber: 0000:00:1d.7 [ 9.229809] hub 2-0:1.0: USB hub found [ 9.229821] hub 2-0:1.0: 6 ports detected [ 9.229906] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.229919] uhci_hcd: USB Universal Host Controller Interface driver [ 9.229933] xen: registering gsi 19 triggering 0 polarity 1 [ 9.229937] Already setup the GSI :19 [ 9.229942] uhci_hcd 0000:00:1a.0: enabling bus mastering [ 9.229949] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 9.229954] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 9.229959] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 9.229990] uhci_hcd 0000:00:1a.0: irq 19, io base 0x000030e0 [ 9.230134] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.230138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.230141] usb usb3: Product: UHCI Host Controller [ 9.230144] usb usb3: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 uhci_hcd [ 9.230148] usb usb3: SerialNumber: 0000:00:1a.0 [ 9.230321] hub 3-0:1.0: USB hub found [ 9.230330] hub 3-0:1.0: 2 ports detected [ 9.230404] xen: registering gsi 19 triggering 0 polarity 1 [ 9.230408] Already setup the GSI :19 [ 9.230416] uhci_hcd 0000:00:1a.1: enabling bus mastering [ 9.230423] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 9.230427] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 9.230433] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 9.230465] uhci_hcd 0000:00:1a.1: irq 19, io base 0x000030c0 [ 9.230537] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.230541] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.230545] usb usb4: Product: UHCI Host Controller [ 9.230548] usb usb4: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 uhci_hcd [ 9.230551] usb usb4: SerialNumber: 0000:00:1a.1 [ 9.230684] hub 4-0:1.0: USB hub found [ 9.230693] hub 4-0:1.0: 2 ports detected [ 9.230768] xen: registering gsi 19 triggering 0 polarity 1 [ 9.230772] Already setup the GSI :19 [ 9.230778] uhci_hcd 0000:00:1a.2: enabling bus mastering [ 9.230784] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 9.230789] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 9.230797] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 9.230828] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000030a0 [ 9.230896] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.230900] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.230904] usb usb5: Product: UHCI Host Controller [ 9.230907] usb usb5: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 uhci_hcd [ 9.230911] usb usb5: SerialNumber: 0000:00:1a.2 [ 9.231047] hub 5-0:1.0: USB hub found [ 9.231056] hub 5-0:1.0: 2 ports detected [ 9.231160] xen: registering gsi 16 triggering 0 polarity 1 [ 9.231164] Already setup the GSI :16 [ 9.231170] uhci_hcd 0000:00:1d.0: enabling bus mastering [ 9.231177] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 9.231181] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 9.231187] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 9.231217] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 9.231290] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.231294] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.231297] usb usb6: Product: UHCI Host Controller [ 9.231300] usb usb6: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 uhci_hcd [ 9.231304] usb usb6: SerialNumber: 0000:00:1d.0 [ 9.231481] hub 6-0:1.0: USB hub found [ 9.231502] hub 6-0:1.0: 2 ports detected [ 9.231560] xen: registering gsi 16 triggering 0 polarity 1 [ 9.231564] Already setup the GSI :16 [ 9.231570] uhci_hcd 0000:00:1d.1: enabling bus mastering [ 9.231577] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 9.231582] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 9.231587] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 9.231617] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00003060 [ 9.231687] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.231691] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.231695] usb usb7: Product: UHCI Host Controller [ 9.231698] usb usb7: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 uhci_hcd [ 9.231701] usb usb7: SerialNumber: 0000:00:1d.1 [ 9.231835] hub 7-0:1.0: USB hub found [ 9.231844] hub 7-0:1.0: 2 ports detected [ 9.231924] xen: registering gsi 16 triggering 0 polarity 1 [ 9.231928] Already setup the GSI :16 [ 9.231934] uhci_hcd 0000:00:1d.2: enabling bus mastering [ 9.231940] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9.231945] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.231950] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 9.231980] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040 [ 9.232050] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.232054] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.232057] usb usb8: Product: UHCI Host Controller [ 9.232060] usb usb8: Manufacturer: Linux 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 uhci_hcd [ 9.232064] usb usb8: SerialNumber: 0000:00:1d.2 [ 9.232202] hub 8-0:1.0: USB hub found [ 9.232211] hub 8-0:1.0: 2 ports detected [ 9.232324] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 9.985548] ata3: failed to resume link (SControl 0) [ 9.985560] ata3: SATA link down (SStatus 0 SControl 0) [ 9.985570] ata2: failed to resume link (SControl 0) [ 9.985582] ata2: SATA link down (SStatus 0 SControl 0) [ 9.989511] ata4: failed to resume link (SControl 0) [ 9.989522] ata4: SATA link down (SStatus 0 SControl 0) [ 9.989535] ata6: failed to resume link (SControl 0) [ 9.989547] ata6: SATA link down (SStatus 0 SControl 0) [ 9.989556] ata1: failed to resume link (SControl 0) [ 9.989568] ata1: SATA link down (SStatus 0 SControl 0) [ 10.277949] i8042: No controller found [ 10.278119] mousedev: PS/2 mouse device common for all mice [ 10.278762] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 10.278912] rtc_cmos 00:03: RTC can wake from S4 [ 10.279104] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 10.279194] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 10.279234] device-mapper: uevent: version 1.0.3 [ 10.279332] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx [ 10.279644] usbcore: registered new interface driver usbhid [ 10.279647] usbhid: USB HID core driver [ 10.279725] TCP: cubic registered [ 10.279728] NET: Registered protocol family 17 [ 10.279747] Key type dns_resolver registered [ 10.280161] registered taskstats version 1 [ 10.281423] rtc_cmos 00:03: setting system clock to 2013-02-04 09:28:23 UTC (1359970103) [ 10.281433] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 10.281437] EDD information not available. [ 10.365566] ata5: failed to resume link (SControl 0) [ 10.365583] ata5: SATA link down (SStatus 0 SControl 0) [ 10.366099] Freeing unused kernel memory: 636k freed [ 10.366228] Write protecting the kernel read-only data: 12288k [ 10.369824] Freeing unused kernel memory: 1640k freed [ 10.370670] Freeing unused kernel memory: 1780k freed [ 10.450801] Fusion MPT base driver 3.04.20 [ 10.450806] Copyright (c) 1999-2008 LSI Corporation [ 10.451327] Fusion MPT SAS Host driver 3.04.20 [ 10.451362] xen: registering gsi 16 triggering 0 polarity 1 [ 10.451367] Already setup the GSI :16 [ 10.451638] mptbase: ioc0: Initiating bringup [ 10.605551] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 10.739714] usb 2-1: New USB device found, idVendor=05e3, idProduct=0719 [ 10.739724] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 10.739732] usb 2-1: Product: USB Storage [ 10.739737] usb 2-1: SerialNumber: 000000000033 [ 10.977529] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 11.017542] ioc0: LSISAS1078 C2: Capabilities={Initiator} [ 11.135930] usb 5-1: New USB device found, idVendor=046b, idProduct=ff10 [ 11.135940] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.135947] usb 5-1: Product: Virtual Keyboard and Mouse [ 11.135953] usb 5-1: Manufacturer: American Megatrends Inc. [ 11.135958] usb 5-1: SerialNumber: serial [ 11.145157] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3 [ 11.145425] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input0 [ 11.151093] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4 [ 11.151360] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input1 [ 23.819242] scsi6 : ioc0: LSISAS1078 C2, FwRev=011b0000h, Ports=1, MaxQ=276, IRQ=16 [ 23.823655] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 [ 23.827124] scsi 6:0:0:0: Direct-Access ATA ST9500530NS SN04 PQ: 0 ANSI: 5 [ 23.827774] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 23.828186] sd 6:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 23.882101] sd 6:0:0:0: [sda] Write Protect is off [ 23.882110] sd 6:0:0:0: [sda] Mode Sense: 73 00 00 08 [ 23.884318] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.993837] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 24.050901] sd 6:0:0:0: [sda] Attached SCSI disk [ 24.073501] Initialising Xen virtual ethernet driver. [ 24.089738] udev: starting version 147 [ 25.225175] kjournald starting. Commit interval 5 seconds [ 25.225985] EXT3-fs (sda6): using internal journal [ 25.225996] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 27.430759] udev: starting version 147 [ 27.533221] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78) [ 27.541200] xen: registering gsi 18 triggering 0 polarity 1 [ 27.541208] Already setup the GSI :18 [ 27.541292] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 27.589606] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [ 27.676939] Initializing USB Mass Storage driver... [ 27.677509] scsi7 : usb-storage 2-1:1.0 [ 27.677593] usbcore: registered new interface driver usb-storage [ 27.677597] USB Mass Storage support registered. [ 27.689507] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0xc [ 27.689515] i7core_edac: Unknown symbol edac_mc_del_mc (err 0) [ 27.689528] i7core_edac: Unknown symbol edac_mc_add_mc (err 0) [ 27.689536] i7core_edac: Unknown symbol edac_pci_create_generic_ctl (err 0) [ 27.689540] i7core_edac: Unknown symbol edac_mc_alloc (err 0) [ 27.689546] i7core_edac: Unknown symbol edac_mc_free (err 0) [ 27.689552] i7core_edac: Unknown symbol edac_mc_handle_error (err 0) [ 27.689565] i7core_edac: Unknown symbol edac_pci_release_generic_ctl (err 0) [ 27.762633] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0xc [ 27.771813] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0xc [ 27.781360] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0xc [ 27.790101] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0xc [ 27.791214] NET: Registered protocol family 10 [ 27.799375] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0xc [ 27.809037] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0xc [ 27.818861] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0xc [ 27.828158] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 28.679744] scsi 7:0:0:0: CD-ROM TEAC DV-W28S-V 1.0A PQ: 0 ANSI: 0 [ 28.684959] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 28.684969] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 28.685236] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 28.685401] sr 7:0:0:0: Attached scsi generic sg1 type 5 [ 28.824831] Adding 2096476k swap on /dev/sda2. Priority:-1 extents:1 across:2096476k [ 30.833821] loop: module loaded [ 30.971071] kjournald starting. Commit interval 5 seconds [ 30.971670] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 40.070007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.070260] igb: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 40.070331] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.489429] Bridge firewalling registered [ 42.502752] device eth0 entered promiscuous mode [ 42.509612] br0: port 1(eth0) entered forwarding state [ 42.509617] br0: port 1(eth0) entered forwarding state [ 48.476283] irqbalance[3575]: segfault at 4 ip 00007ff5b07d18ed sp 00007fff7fe80d50 error 6 in libc-2.11.3.so[7ff5b072e000+16d000] [ 48.639756] mcelog:3587 map pfn expected mapping type write-back for [mem 0x8f302000-0x8f302fff], got uncached-minus [ 48.639777] ------------[ cut here ]------------ [ 48.639783] WARNING: at arch/x86/mm/pat.c:774 untrack_pfn+0x94/0xc0() [ 48.639784] Hardware name: S5520UR [ 48.639785] Modules linked in: bridge stp llc loop crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ipv6 microcode usb_storage i2c_i801 joydev tpm_tis tpm tpm_bios xen_blkfront xen_netfront mptsas mptscsih mptbase scsi_transport_sas [ 48.639800] Pid: 3587, comm: mcelog Not tainted 3.7.6-10.home_olh_kernel_sles11sp1.1-kernel-linux-3_7 #1 [ 48.639801] Call Trace: [ 48.639804] [] ? untrack_pfn+0x94/0xc0 [ 48.639809] [] warn_slowpath_common+0x7a/0xb0 [ 48.639811] [] warn_slowpath_null+0x15/0x20 [ 48.639812] [] untrack_pfn+0x94/0xc0 [ 48.639817] [] unmap_single_vma+0x77b/0x7f0 [ 48.639819] [] unmap_vmas+0x5a/0x90 [ 48.639821] [] exit_mmap+0x87/0x150 [ 48.639823] [] mmput+0x2d/0xd0 [ 48.639825] [] dup_mm+0x36b/0x460 [ 48.639827] [] copy_process+0x828/0x1120 [ 48.639829] [] do_fork+0x62/0x340 [ 48.639834] [] ? sys_connect+0x71/0xa0 [ 48.639836] [] ? set_close_on_exec+0x40/0x80 [ 48.639841] [] sys_clone+0x23/0x30 [ 48.639844] [] stub_clone+0x13/0x20 [ 48.639846] [] ? system_call_fastpath+0x16/0x1b [ 48.639847] ---[ end trace 32d9c32b0defe75a ]--- [ 50.101769] Event-channel device installed. [ 50.174766] xen-pciback: backend is vpci