[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Remus disk replication failed



Okay, I solve it. I removed drbd8-utils and re-install drbd from sources. DRBD connected with D protocol. I could go further with disk replication, hopefully there is no mistaken step again :)

Regards,

Agya

On Mon, Feb 18, 2013 at 11:13 PM, agya naila <agya.naila@xxxxxxxxx> wrote:
I forgot to told that its  work with protocol C

 $ sudo drbd-overview
  1:drbd-vm  SyncTarget Secondary/Secondary Inconsistent/UpToDate C r-----
        [=>..................] sync'ed: 12.0% (9016/10236)M

$ sudo drbd-overview
  1:drbd-vm  Connected Secondary/Secondary UpToDate/UpToDate C r-----


On Mon, Feb 18, 2013 at 11:00 PM, agya naila <agya.naila@xxxxxxxxx> wrote:
On Mon, Feb 18, 2013 at 10:33 PM, Shriram Rajagopalan <rshriram@xxxxxxxxx> wrote:
Hi,
 I suggest you read up on the DRBD setup documentation from the
drbd.org website.
 The setup procedure is same. You can later flip to the remus
replication protocol by simply
 changing the protocol type (C to D).

I am comparing my configuration with drbd website, however I got this error :

$ sudo drbdadm up drbd-vm
'D' is no valid protocol.
Command 'drbdsetup 1 net ipv4:10.10.10.1:7789 ipv4:10.10.10.3:7789 D --set-defaults --create-device --rr-conflict=disconnect --after-sb-2pri=disconnect --after-sb-1pri=discard-secondary --after-sb-0pri=discard-younger-primary --allow-two-primaries --ko-count=4 --max-epoch-size=4096 --unplug-watermark=4096 --max-buffers=8192 --ping-timeout=20 --ping-int=3 --timeout=30' terminated with exit code 20
drbdadm connect drbd-vm: exited with code 20

$ sudo drbd-overview
  1:drbd-vm  StandAlone Secondary/Unknown UpToDate/DUnknown r----s

Thank you,

Agya

 
thanks
shriram

On Mon, Feb 18, 2013 at 4:11 PM, agya naila <agya.naila@xxxxxxxxx> wrote:
>
> On Mon, Feb 18, 2013 at 9:08 PM, Shriram Rajagopalan <rshriram@xxxxxxxxx>
> wrote:
>>
>> hi
>
>
> Thank you shriram.
>
>>
>>  sorry for the delayed response. IIRC the blktap2 driver required for
>> tapdisk replication doesnt exist in the mainstream dom0 kernels, IIRC.
>>  I havent used it in a long time myself. I suggest trying disk
>> replication with DRBD.
>>
>
> I am also found some information here
> http://osdir.com/ml/xen-users/2011-07/msg00653.html about blktap2 problem on
> amd64 architecture. I have tried to install and configure the DRBD but its
> didn't connect each other.
> I used drbd-8.3.11-remus and installed as follow
>
> cd /usr/src/
> wget
> http://remusha.wikidot.com/local--files/configuring-and-installing-remus/drbd-8.3.11-remus.tar.gz
> tar xzf drbd-8.3.9-remus.tar.gz
> chown -R root:root drbd-8.3-remus
> cd /usr/src/drbd-8.3-remus
> chmod 777 autogen.sh
> ./autogen.sh
> dpkg-buildpackage -b -uc
> cd /usr/src/drbd-8.3-remus/drbd
> make clean
> make
> make install
> cd /usr/src/
> cp /usr/src/drbd-8.3-remus/scripts/global_common.conf.protoD
> /etc/drbd.d/global_common.conf
> cp /usr/src/drbd-8.3-remus/scripts/testvms_protoD.res
> /etc/drbd.d/SystemHA_protoD.res
>
> sudo apt-get install drbd8-utils
>
>  from tutorial http://remusha.wikidot.com/configuring-and-installing-remus
>
> My *.res configuration as follow :
>
> resource drbd-vm{
>   device    /dev/drbd1;
>   disk      /dev/vgvoip/DomU;
>   meta-disk internal;
>   on machine1 {
>     address   10.10.10.1:7789;
>   }
>   on machine2 {
>     address   10.10.10.3:7789;
>   }
> }
>
> and then I invoke command to create that meta
>
> drbdadm create-md drbd-vm
>
> However, when I try to make this configuration up by :
>
> drbdadm up drbd-vm
>
> Its come with error :
>
> $ sudo drbdadm up drbd-vm
> 1: Failure: (124) Device is attached to a disk (use detach first)
> Command 'drbdsetup 1 disk /dev/vgvoip/DomU /dev/vgvoip/DomU internal
> --set-defaults --create-device --fencing=dont-care --on-io-error=pass_on'
> terminated with exit code 10
>
> If I run the
>
> $ sudo drbdadm detach drbd-vm
>
> Its come error
>
> $ sudo drbdadm detach drbd-vm
> 1: State change failed: (-2) Need access to UpToDate data
> Command 'drbdsetup 1 detach' terminated with exit code 17
>
> Here the /proc/drbd on both machine
>
> Machine 1
>
> $ sudo cat /proc/drbd
> version: 8.3.11 (api:88/proto:86-96)
> GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by root@machine1,
> 2013-02-18 18:49:57
>
>  1: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown   r----s
>     ns:0 nr:0 dw:0 dr:1712 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b def:0
> chkpt:0 oos:10485404
>
>
> Machine 2
>
> $ sudo cat /proc/drbd
> version: 8.3.11 (api:88/proto:86-96)
> GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by root@machine2,
> 2013-02-18 19:26:57
>
>  1: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown   r----s
>     ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b def:0
> chkpt:0 oos:10485404
>
>
> Do you have some hints?
>
> Thank you,
>
>
> Agya
>
>
>> thanks
>> shriram
>>
>> On Mon, Feb 18, 2013 at 5:38 AM, Hery Dian Septama <herydians@xxxxxxxxx>
>> wrote:
>> > Hello, Anyone have a clue? I have tried but still failed :(
>> >
>> > On Sat, Feb 16, 2013 at 6:56 PM, agya naila <agya.naila@xxxxxxxxx>
>> > wrote:
>> >>
>> >> Dear all,
>> >>
>> >> I am configure my machine to run the remus disk replication. I am using
>> >> xen 4.2.3 installed from sources and Ubuntu 12.04 64 bit both for Dom0
>> >> and
>> >> DomU.
>> >> I have install the blktap and its work properly with configuration
>> >> string
>> >> phy or tap2 like this :
>> >> disk = ['phy:/dev/vggroup/DomU,xvda,w']
>> >> or
>> >> disk = ['tap2:tapdisk:aio:/dev/vggroup/DomU,xvda,w']
>> >>
>> >> and remus command
>> >>
>> >> remus --no-net myvm mybackuphost
>> >>
>> >>
>> >> However when I change the string as suggested on remus pages to enable
>> >> the
>> >> disk replication its still failed :
>> >>
>> >> name = "DomU"
>> >> memory = 1024
>> >> disk = ['tap2:remus:10.10.10.3:8002|aio:/dev/vggroup/DomU,xvda,w']
>> >> vif = ['ip=192.168.1.55,bridge=xenbr0']
>> >> bootloader = "pygrub"
>> >>
>> >> with error messages :
>> >>
>> >> name1@machine1:~$ sudo xm create -c /etc/xen/DomU.cfg
>> >> Using config file "/etc/xen/DomU.cfg".
>> >> Error: ('create', '-aremus:10.10.10.3:8002|aio:/dev/vggroup/DomU')
>> >> failed
>> >> (512  )
>> >>
>> >> and on the log file :
>> >>
>> >>
>> >> name1@machine1:~$ sudo sudo tail /var/log/xen/xend.log
>> >>     mounted_vbd_uuid = dom0.create_vbd(vbd, disk);
>> >>   File
>> >> "/usr/local/lib/python2.7/dist-packages/xen/xend/XendDomainInfo.py",
>> >> line
>> >> 3987, in create_vbd
>> >>     devid = dev_control.createDevice(config)
>> >>   File
>> >>
>> >> "/usr/local/lib/python2.7/dist-packages/xen/xend/server/BlktapController.py",
>> >> line 174, in createDevice
>> >>     device = TapdiskController.create(params, file)
>> >>   File
>> >>
>> >> "/usr/local/lib/python2.7/dist-packages/xen/xend/server/BlktapController.py",
>> >> line 286, in create
>> >>     return TapdiskController.exc('create', '-a%s:%s' % (dtype, image))
>> >>   File
>> >>
>> >> "/usr/local/lib/python2.7/dist-packages/xen/xend/server/BlktapController.py",
>> >> line 233, in exc
>> >>     (args, rc, out, err))
>> >> TapdiskException: ('create',
>> >> '-aremus:10.10.10.3:8002|aio:/dev/vggroup/DomU') failed (512  )
>> >>
>> >> Any hints and help would very appreciated.
>> >>
>> >> Regards,
>> >>
>> >> Agya
>> >>
>> >>
>> >> _______________________________________________
>> >> Xen-devel mailing list
>> >> Xen-devel@xxxxxxxxxxxxx
>> >> http://lists.xen.org/xen-devel
>> >>
>> >
>> >
>> > _______________________________________________
>> > Xen-devel mailing list
>> > Xen-devel@xxxxxxxxxxxxx
>> > http://lists.xen.org/xen-devel
>> >
>
>



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.