[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] xen: enable stubdom on a per arch basis
On Thu, 2013-01-31 at 10:52 +0000, Samuel Thibault wrote: > Ian Campbell, le Thu 31 Jan 2013 10:46:31 +0000, a Ãcrit : > > ... and disable on ARM (for now). > > Well, maybe we should rather use an "inclusion" list rather than an > "exclusion" list, since it essentially depends on which arch mini-os was > ported to. Hrm, yes, I was thinking that ARM was the exception but you are right, it makes more sense to consider x86 the exception (in that it has had mini-os ported to it). 8<------------------ From 876a991cb2f8efa8076f3089382d0c453c96b68e Mon Sep 17 00:00:00 2001 From: Ian Campbell <ian.campbell@xxxxxxxxxx> Date: Thu, 31 Jan 2013 10:00:40 +0000 Subject: [PATCH] xen: enable stubdom on a per arch basis ... and disable on ARM (for now). Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Cc: Roger Pau Monne <roger.pau@xxxxxxxxxx> Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Cc: Tim (Xen.org) <tim@xxxxxxx> --- v2: whitelist x86 (which has mini-os ported) instead of blacklisting ARM --- configure | 292 ++++++++++++++++++++++++++++++++++++++++++++++++++----- configure.ac | 15 +++- m4/subsystem.m4 | 65 ++++++++++--- 3 files changed, 333 insertions(+), 39 deletions(-) diff --git a/configure b/configure index c2ec87d..69803a7 100755 --- a/configure +++ b/configure @@ -568,6 +568,14 @@ tools kernels xen subdirs +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build target_alias host_alias build_alias @@ -1220,6 +1228,10 @@ Fine tuning of the installation directories: _ACEOF cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi @@ -1236,7 +1248,7 @@ Optional Features: --disable-xen Disable build and install of xen --disable-kernels Disable build and install of kernels --disable-tools Disable build and install of tools - --disable-stubdom Disable build and install of stubdom + --enable-stubdom Enable build and install of stubdom --disable-docs Disable build and install of docs Report bugs to <xen-devel@xxxxxxxxxxxxx>. @@ -1673,20 +1685,6 @@ ac_config_files="$ac_config_files ./config/Toplevel.mk" - - - - - - - - - - - - - - ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then @@ -1716,22 +1714,151 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + + + + + + + + + + + + + + + + + + + + + + + + +case "$host_cpu" in + i[3456]86|x86_64) + arch_enable_stubdom=y + ;; + *) + arch_enable_stubdom=n + ;; +esac + # Check whether --enable-xen was given. if test "${enable_xen+set}" = set; then : enableval=$enable_xen; + +if test "x$enableval" = "xyes"; then : + + +xen=y +SUBSYSTEMS="$SUBSYSTEMS xen" + + +else + +if test "x$enableval" = "xno"; then : + + xen=n + +fi + +fi + + else + xen=y SUBSYSTEMS="$SUBSYSTEMS xen" -if test -e "xen/configure"; then : -subdirs="$subdirs xen" +fi + + +if test -e "xen/configure"; then : + +if test "x$xen" = "xy" || test "x$xen" = "x" ; then + subdirs="$subdirs xen" fi @@ -1743,16 +1870,41 @@ fi # Check whether --enable-kernels was given. if test "${enable_kernels+set}" = set; then : enableval=$enable_kernels; + +if test "x$enableval" = "xyes"; then : + + +kernels=y +SUBSYSTEMS="$SUBSYSTEMS kernels" + + +else + +if test "x$enableval" = "xno"; then : + + kernels=n + +fi + +fi + + else + kernels=y SUBSYSTEMS="$SUBSYSTEMS kernels" -if test -e "kernels/configure"; then : -subdirs="$subdirs kernels" +fi + + +if test -e "kernels/configure"; then : + +if test "x$kernels" = "xy" || test "x$kernels" = "x" ; then + subdirs="$subdirs kernels" fi @@ -1764,16 +1916,41 @@ fi # Check whether --enable-tools was given. if test "${enable_tools+set}" = set; then : enableval=$enable_tools; + +if test "x$enableval" = "xyes"; then : + + +tools=y +SUBSYSTEMS="$SUBSYSTEMS tools" + + +else + +if test "x$enableval" = "xno"; then : + + tools=n + +fi + +fi + + else + tools=y SUBSYSTEMS="$SUBSYSTEMS tools" -if test -e "tools/configure"; then : -subdirs="$subdirs tools" +fi + + +if test -e "tools/configure"; then : + +if test "x$tools" = "xy" || test "x$tools" = "x" ; then + subdirs="$subdirs tools" fi @@ -1785,38 +1962,98 @@ fi # Check whether --enable-stubdom was given. if test "${enable_stubdom+set}" = set; then : enableval=$enable_stubdom; + +if test "x$enableval" = "xyes"; then : + + +stubdom=y +SUBSYSTEMS="$SUBSYSTEMS stubdom" + + +else + +if test "x$enableval" = "xno"; then : + + stubdom=n + +fi + +fi + + else +if test "x$arch_enable_stubdom" = "xy"; then : + + stubdom=y SUBSYSTEMS="$SUBSYSTEMS stubdom" -if test -e "stubdom/configure"; then : -subdirs="$subdirs stubdom" + +else + + +stubdom=n fi +if test -e "stubdom/configure"; then : + +if test "x$stubdom" = "xy" || test "x$stubdom" = "x" ; then + subdirs="$subdirs stubdom" + +fi + fi +fi + + # Check whether --enable-docs was given. if test "${enable_docs+set}" = set; then : enableval=$enable_docs; + +if test "x$enableval" = "xyes"; then : + + +docs=y +SUBSYSTEMS="$SUBSYSTEMS docs" + + +else + +if test "x$enableval" = "xno"; then : + + docs=n + +fi + +fi + + else + docs=y SUBSYSTEMS="$SUBSYSTEMS docs" -if test -e "docs/configure"; then : -subdirs="$subdirs docs" + +fi +if test -e "docs/configure"; then : + +if test "x$docs" = "xy" || test "x$docs" = "x" ; then + subdirs="$subdirs docs" + fi fi @@ -1826,6 +2063,11 @@ fi +echo "Will build the following subsystems:" +for x in $SUBSYSTEMS; do + echo " $x" +done + cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure diff --git a/configure.ac b/configure.ac index df1d5da..83342f7 100644 --- a/configure.ac +++ b/configure.ac @@ -8,14 +8,27 @@ AC_CONFIG_SRCDIR([./xen/common/kernel.c]) AC_CONFIG_FILES([./config/Toplevel.mk]) AC_PREFIX_DEFAULT([/usr]) +AC_CANONICAL_HOST + m4_include([m4/features.m4]) m4_include([m4/subsystem.m4]) +dnl mini-os is only ported to certain platforms +case "$host_cpu" in + i[[3456]]86|x86_64) + arch_enable_stubdom=y + ;; + *) + arch_enable_stubdom=n + ;; +esac + AX_SUBSYSTEM_DEFAULT_ENABLE([xen]) AX_SUBSYSTEM_DEFAULT_ENABLE([kernels]) AX_SUBSYSTEM_DEFAULT_ENABLE([tools]) -AX_SUBSYSTEM_DEFAULT_ENABLE([stubdom]) +AX_SUBSYSTEM_CONDITIONAL([stubdom], $arch_enable_stubdom) AX_SUBSYSTEM_DEFAULT_ENABLE([docs]) + AX_SUBSYSTEM_FINISH AC_OUTPUT() diff --git a/m4/subsystem.m4 b/m4/subsystem.m4 index d3eb8c9..9e1e61f 100644 --- a/m4/subsystem.m4 +++ b/m4/subsystem.m4 @@ -1,32 +1,71 @@ +AC_DEFUN([AX_ENABLE_SUBSYSTEM], [ +$1=y +SUBSYSTEMS="$SUBSYSTEMS $1" +]) + +AC_DEFUN([AX_DISABLE_SUBSYSTEM], [ +$1=n +]) + AC_DEFUN([AX_SUBSYSTEM_DEFAULT_ENABLE], [ AC_ARG_ENABLE([$1], AS_HELP_STRING([--disable-$1], [Disable build and install of $1]),[ -$1=n +AX_SUBSYSTEM_INTERNAL([$1]) ],[ -$1=y -SUBSYSTEMS="$SUBSYSTEMS $1" -AS_IF([test -e "$1/configure"], [ -AC_CONFIG_SUBDIRS([$1]) +AX_ENABLE_SUBSYSTEM([$1]) ]) -]) -AC_SUBST($1) +AX_SUBSYSTEM_CONFIGURE([$1]) +AC_SUBST([$1]) ]) AC_DEFUN([AX_SUBSYSTEM_DEFAULT_DISABLE], [ AC_ARG_ENABLE([$1], AS_HELP_STRING([--enable-$1], [Enable build and install of $1]),[ -$1=y -SUBSYSTEMS="$SUBSYSTEMS $1" -AS_IF([test -e "$1/configure"], [ -AC_CONFIG_SUBDIRS([$1]) +AX_SUBSYSTEM_INTERNAL([$1]) +],[ +AX_DISABLE_SUBSYSTEM([$1]) ]) +AX_SUBSYSTEM_CONFIGURE([$1]) +AC_SUBST([$1]) +]) + +AC_DEFUN([AX_SUBSYSTEM_CONDITIONAL], [ +AC_ARG_ENABLE([$1], +AS_HELP_STRING([--enable-$1], [Enable build and install of $1]),[ +AX_SUBSYSTEM_INTERNAL([$1]) ],[ -$1=n +AS_IF([test "x$2" = "xy"],[ +AX_ENABLE_SUBSYSTEM([$1]) +],[ +AX_DISABLE_SUBSYSTEM([$1]) ]) +AX_SUBSYSTEM_CONFIGURE([$1]) AC_SUBST($1) ]) - +]) AC_DEFUN([AX_SUBSYSTEM_FINISH], [ AC_SUBST(SUBSYSTEMS) +echo "Will build the following subsystems:" +for x in $SUBSYSTEMS; do + echo " $x" +done +]) + +AC_DEFUN([AX_SUBSYSTEM_INTERNAL], [ +AS_IF([test "x$enableval" = "xyes"], [ +AX_ENABLE_SUBSYSTEM([$1]) +],[ +AS_IF([test "x$enableval" = "xno"],[ +AX_DISABLE_SUBSYSTEM([$1]) +]) +]) +]) + +AC_DEFUN([AX_SUBSYSTEM_CONFIGURE], [ +AS_IF([test -e "$1/configure"], [ +if test "x$$1" = "xy" || test "x$$1" = "x" ; then + AC_CONFIG_SUBDIRS([$1]) +fi +]) ]) -- 1.7.2.5 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |