[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH V2 3/5] docs: drop doxygen stuff



In the 300+ page PDF this produces I couldn't see anything which
wasn't the autogenerated doxygen boilerplate stuff.

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
---
 docs/Docs.mk       |    1 -
 docs/Doxyfile      | 1218 ----------------------------------------------------
 docs/Doxyfilter    |   16 -
 docs/Makefile      |   13 -
 docs/html.sty      |  887 --------------------------------------
 docs/pythfilter.py |  658 ----------------------------
 6 files changed, 0 insertions(+), 2793 deletions(-)
 delete mode 100644 docs/Doxyfile
 delete mode 100644 docs/Doxyfilter
 delete mode 100644 docs/html.sty
 delete mode 100644 docs/pythfilter.py

diff --git a/docs/Docs.mk b/docs/Docs.mk
index dcc8a21..db3c19d 100644
--- a/docs/Docs.mk
+++ b/docs/Docs.mk
@@ -1,6 +1,5 @@
 FIG2DEV                := fig2dev
 LATEX2HTML     := latex2html
-DOXYGEN                := doxygen
 POD2MAN                := pod2man
 POD2HTML       := pod2html
 POD2TEXT       := pod2text
diff --git a/docs/Doxyfile b/docs/Doxyfile
deleted file mode 100644
index 8ac4451..0000000
--- a/docs/Doxyfile
+++ /dev/null
@@ -1,1218 +0,0 @@
-# Doxyfile 1.4.2
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = Xen Python Tools
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
-# This could be handy for archiving the generated documentation or 
-# if some version control system is used.
-
-PROJECT_NUMBER         = 
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
-# base path where the generated documentation will be put. 
-# If a relative path is entered, it will be relative to the location 
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = api/tools/python
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
-# 4096 sub-directories (in 2 levels) under the output directory of each output 
-# format and will distribute the generated files over these directories. 
-# Enabling this option can be useful when feeding doxygen a huge amount of 
-# source files, where putting all generated files in the same directory would 
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS         = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
-# documentation generated by doxygen is written. Doxygen will use this 
-# information to generate all constant output in the proper language. 
-# The default language is English, other supported languages are: 
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
-# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
-# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
-# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
-# Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE        = English
-
-# This tag can be used to specify the encoding used in the generated output. 
-# The encoding is not always determined by the language that is chosen, 
-# but also whether or not the output is meant for Windows or non-Windows 
users. 
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
-# forces the Windows encoding (this is the default for the Windows binary), 
-# whereas setting the tag to NO uses a Unix-style encoding (the default for 
-# all platforms other than Windows).
-
-USE_WINDOWS_ENCODING   = NO
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
-# include brief member descriptions after the members that are listed in 
-# the file and class documentation (similar to JavaDoc). 
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
-# the brief description of a member or function before the detailed 
description. 
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator 
-# that is used to form the text in various listings. Each string 
-# in this list, if found as the leading text of the brief description, will be 
-# stripped from the text and the result after processing the whole list, is 
-# used as the annotated text. Otherwise, the brief description is used as-is. 
-# If left blank, the following values are used ("$name" is automatically 
-# replaced with the name of the entity): "The $name class" "The $name widget" 
-# "The $name file" "is" "provides" "specifies" "contains" 
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF       = 
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
-# Doxygen will generate a detailed section even if there is only a brief 
-# description.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
-# inherited members of a class in the documentation of that class as if those 
-# members were ordinary class members. Constructors, destructors and 
assignment 
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
-# path before files name in the file list and in the header files. If set 
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
-# can be used to strip a user-defined part of the path. Stripping is 
-# only done if one of the specified strings matches the left-hand part of 
-# the path. The tag can be used to show relative paths in the file list. 
-# If left blank the directory from which doxygen is run is used as the 
-# path to strip.
-
-STRIP_FROM_PATH        = 
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
-# the path mentioned in the documentation of a class, which tells 
-# the reader which header file to include in order to use a class. 
-# If left blank only the name of the header file containing the class 
-# definition is used. Otherwise one should specify the include paths that 
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH    = 
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
-# (but less readable) file names. This can be useful is your file systems 
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
-# will interpret the first line (until the first dot) of a JavaDoc-style 
-# comment as the brief description. If set to NO, the JavaDoc 
-# comments will behave just like the Qt-style comments (thus requiring an 
-# explicit @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF      = YES
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
-# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
-# comments) as a brief description. This used to be the default behaviour. 
-# The new default is to treat a multi-line C++ comment block as a detailed 
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member 
-# documentation.
-
-DETAILS_AT_TOP         = YES
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
-# member inherits the documentation from any documented member that it 
-# re-implements.
-
-INHERIT_DOCS           = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
-# tag is set to YES, then doxygen will reuse the documentation of the first 
-# member in the group (if any) for the other members of the group. By default 
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
-# a new page for each member. If set to NO, the documentation of a member will 
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 8
-
-# This tag can be used to specify a number of aliases that acts 
-# as commands in the documentation. An alias has the form "name=value". 
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
-# put the command \sideeffect (or @sideeffect) in the documentation, which 
-# will result in a user-defined paragraph with heading "Side Effects:". 
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                = 
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
-# sources only. Doxygen will then generate output that is more tailored for C. 
-# For instance, some of the names that are used will be different. The list 
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = NO
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
sources 
-# only. Doxygen will then generate output that is more tailored for Java. 
-# For instance, namespaces will be presented as packages, qualified scopes 
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = YES
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
-# the same type (for instance a group of public functions) to be put as a 
-# subgroup of that type (e.g. under the Public Functions section). Set it to 
-# NO to prevent subgrouping. Alternatively, this can be done per class using 
-# the \nosubgrouping command.
-
-SUBGROUPING            = YES
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
-# documentation are documented, even if no documentation was available. 
-# Private class members and static file members will be hidden unless 
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file 
-# will be included in the documentation.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
-# defined locally in source files will be included in the documentation. 
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local 
-# methods, which are defined in the implementation section but not in 
-# the interface are included in the documentation. 
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
-# undocumented members of documented classes, files or namespaces. 
-# If set to NO (the default) these members will be included in the 
-# various overviews, but no documentation section is generated. 
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
-# undocumented classes that are normally visible in the class hierarchy. 
-# If set to NO (the default) these classes will be included in the various 
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
-# friend (class|struct|union) declarations. 
-# If set to NO (the default) these declarations will be included in the 
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
-# documentation blocks found inside the body of a function. 
-# If set to NO (the default) these blocks will be appended to the 
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation 
-# that is typed after a \internal command is included. If the tag is set 
-# to NO (the default) then the documentation will be excluded. 
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
-# file names in lower-case letters. If set to YES upper-case letters are also 
-# allowed. This is useful if you have classes or files whose names only differ 
-# in case and if your file system supports case sensitive file names. Windows 
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
-# will show members with their full class and namespace scopes in the 
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
-# will put a list of the files that are included by a file in the 
documentation 
-# of that file.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
-# will sort the (detailed) documentation of file and class members 
-# alphabetically by member name. If set to NO the members will appear in 
-# declaration order.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
-# brief documentation of file, namespace and class members alphabetically 
-# by member name. If set to NO (the default) the members will appear in 
-# declaration order.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
-# sorted by fully-qualified names, including namespaces. If set to 
-# NO (the default), the class list will be sorted only by class name, 
-# not including the namespace part. 
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the 
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or 
-# disable (NO) the todo list. This list is created by putting \todo 
-# commands in the documentation.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or 
-# disable (NO) the test list. This list is created by putting \test 
-# commands in the documentation.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or 
-# disable (NO) the bug list. This list is created by putting \bug 
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
-# disable (NO) the deprecated list. This list is created by putting 
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional 
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       = 
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
-# the initial value of a variable or define consists of for it to appear in 
-# the documentation. If the initializer consists of more lines than specified 
-# here it will be hidden. Use a value of 0 to hide initializers completely. 
-# The appearance of the initializer of individual variables and defines in the 
-# documentation can be controlled using \showinitializer or \hideinitializer 
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
-# at the bottom of the documentation of classes and structs. If set to YES the 
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = YES
-
-# If the sources in your project are distributed over multiple directories 
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory 
hierarchy 
-# in the documentation.
-
-SHOW_DIRECTORIES       = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that 
-# doxygen should invoke to get the current version for each file (typically 
from the 
-# version control system). Doxygen will invoke the program by executing (via 
-# popen()) the command <command> <input-file>, where <command> is the value of 
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
-# provided by doxygen. Whatever the progam writes to standard output 
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER    = 
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated 
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are 
-# generated by doxygen. Possible values are YES and NO. If left blank 
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
-# potential errors in the documentation, such as not documenting some 
-# parameters in a documented function, or documenting parameters that 
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be abled to get warnings for 
-# functions that are documented, but have no documentation for their 
parameters 
-# or return value. If set to NO (the default) doxygen will only warn about 
-# wrong or incomplete parameter documentation, but not about the absence of 
-# documentation.
-
-WARN_NO_PARAMDOC       = NO
-
-# The WARN_FORMAT tag determines the format of the warning messages that 
-# doxygen can produce. The string should contain the $file, $line, and $text 
-# tags, which will be replaced by the file and line number from which the 
-# warning originated and the warning text. Optionally the format may contain 
-# $version, which will be replaced by the version of the file (if it could 
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning 
-# and error messages should be written. If left blank the output is written 
-# to stderr.
-
-WARN_LOGFILE           = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that 
contain 
-# documented source files. You may enter file names like "myfile.cpp" or 
-# directories like "/usr/src/myproject". Separate the files or directories 
-# with spaces.
-
-INPUT                  = ../tools/python/xen/
-
-# If the value of the INPUT tag contains directories, you can use the 
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank the following patterns are tested: 
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh 
*.hxx 
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
-
-FILE_PATTERNS          = *.py *.c
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
-# should be searched for input files as well. Possible values are YES and NO. 
-# If left blank NO is used.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should 
-# excluded from the INPUT source files. This way you can easily exclude a 
-# subdirectory from a directory tree whose root is specified with the INPUT 
tag.
-
-EXCLUDE                = 
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
-# directories that are symbolic links (a Unix filesystem feature) are excluded 
-# from the input.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the 
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
-# certain files from those directories.
-
-EXCLUDE_PATTERNS       = 
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or 
-# directories that contain example code fragments that are included (see 
-# the \include command).
-
-EXAMPLE_PATH           = 
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank all files are included.
-
-EXAMPLE_PATTERNS       = 
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
-# searched for input files to be used with the \include or \dontinclude 
-# commands irrespective of the value of the RECURSIVE tag. 
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or 
-# directories that contain image that are included in the documentation (see 
-# the \image command).
-
-IMAGE_PATH             = 
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should 
-# invoke to filter for each input file. Doxygen will invoke the filter program 
-# by executing (via popen()) the command <filter> <input-file>, where <filter> 
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
-# input file. Doxygen will then use the output that the filter program writes 
-# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
-# ignored.
-
-INPUT_FILTER           = "sh ./Doxyfilter ../tools/python"
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
-# basis.  Doxygen will compare the file name with each pattern and apply the 
-# filter if there is a match.  The filters are a list of the form: 
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
-# is applied to all files.
-
-FILTER_PATTERNS        = 
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
-# INPUT_FILTER) will be used to filter the input files when producing source 
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES    = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
-# be generated. Documented entities will be cross-referenced with these 
sources. 
-# Note: To get rid of all source code in the generated output, make sure also 
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body 
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
-# doxygen to hide any special comment blocks from generated source code 
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
-# then for each documented function all documented 
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default) 
-# then for each documented function all documented entities 
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
-# will generate a verbatim copy of the header file for each class for 
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
-# of all compounds will be generated. Enable this if the project 
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = NO
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all 
-# classes will be put under the same header in the alphabetical index. 
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
-# generate HTML output.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for 
-# each generated HTML page. If it is left blank doxygen will generate a 
-# standard header.
-
-HTML_HEADER            = 
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
-# each generated HTML page. If it is left blank doxygen will generate a 
-# standard footer.
-
-HTML_FOOTER            = 
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
-# style sheet that is used by each HTML page. It can be used to 
-# fine-tune the look of the HTML output. If the tag is left blank doxygen 
-# will generate a default style sheet. Note that doxygen will try to copy 
-# the style sheet file to the HTML output directory, so don't put your own 
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET        = 
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
-# files or namespaces will be aligned in HTML using tables. If set to 
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
-# will be generated that can be used as input for tools like the 
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
-# be used to specify the file name of the resulting .chm file. You 
-# can add a path in front of the file if the result should not be 
-# written to the html output directory.
-
-CHM_FILE               = 
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
-# be used to specify the location (absolute path including file name) of 
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION           = 
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
-# controls if a separate .chi index file is generated (YES) or that 
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
-# controls whether a binary table of contents is generated (YES) or a 
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members 
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
-# top of each HTML page. The value NO (the default) enables the index and 
-# the value YES disables it.
-
-DISABLE_INDEX          = NO
-
-# This tag can be used to set the number of enum values (range [1..20]) 
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that 
-# is generated for HTML Help). For this to work a browser that supports 
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
-# probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
-# used to set the initial width (in pixels) of the frame in which the tree 
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
-# generate Latex output.
-
-GENERATE_LATEX         = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
-# generate index for LaTeX. If left blank `makeindex' will be used as the 
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
-# LaTeX documents. This may be useful for small projects and may help to 
-# save some trees in general.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used 
-# by the printer. Possible values are: a4, a4wide, letter, legal and 
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         = 
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
-# the generated latex document. The header should contain everything until 
-# the first chapter. If it is left blank doxygen will generate a 
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           = 
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
-# contain links (just like the HTML output) instead of page references 
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
-# plain latex in the generated Makefile. Set this option to YES to get a 
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
-# command to the generated LaTeX files. This will instruct LaTeX to keep 
-# running if errors occur, instead of asking the user for help. 
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
-# include the index chapters (such as File Index, Compound Index, etc.) 
-# in the output.
-
-LATEX_HIDE_INDICES     = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
-# The RTF output is optimized for Word 97 and may not look very pretty with 
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
-# RTF documents. This may be useful for small projects and may help to 
-# save some trees in general.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
-# will contain hyperlink fields. The RTF file will 
-# contain links (just like the HTML output) instead of page references. 
-# This makes the output suitable for online browsing using WORD or other 
-# programs which support those fields. 
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's 
-# config file, i.e. a series of assignments. You only have to provide 
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    = 
-
-# Set optional variables used in the generation of an rtf document. 
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to 
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
-# then it will generate one additional man file for each entity 
-# documented in the real man page(s). These additional files 
-# only source the real man page, but without them the man command 
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will 
-# generate an XML file that captures the structure of 
-# the code including all documentation.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema, 
-# which can be used by a validating XML parser to check the 
-# syntax of the XML files.
-
-XML_SCHEMA             = 
-
-# The XML_DTD tag can be used to specify an XML DTD, 
-# which can be used by a validating XML parser to check the 
-# syntax of the XML files.
-
-XML_DTD                = 
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
-# dump the program listings (including syntax highlighting 
-# and cross-referencing information) to the XML output. Note that 
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
-# generate an AutoGen Definitions (see autogen.sf.net) file 
-# that captures the structure of the code including all 
-# documentation. Note that this feature is still experimental 
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
-# generate a Perl module file that captures the structure of 
-# the code including all documentation. Note that this 
-# feature is still experimental and incomplete at the 
-# moment.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
-# nicely formatted so it can be parsed by a human reader.  This is useful 
-# if you want to understand what is going on.  On the other hand, if this 
-# tag is set to NO the size of the Perl module output will be much smaller 
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file 
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
-# This is useful so different doxyrules.make files included by the same 
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX = 
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
-# evaluate all C-preprocessor directives found in the sources and include 
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
-# names in the source code. If set to NO (the default) only conditional 
-# compilation will be performed. Macro expansion can be done in a controlled 
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
-# then the macro expansion is limited to the macros specified with the 
-# PREDEFINED and EXPAND_AS_PREDEFINED tags.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that 
-# contain include files that are not input files but should be processed by 
-# the preprocessor.
-
-INCLUDE_PATH           = 
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
-# patterns (like *.h and *.hpp) to filter out the header-files in the 
-# directories. If left blank, the patterns specified with FILE_PATTERNS will 
-# be used.
-
-INCLUDE_FILE_PATTERNS  = 
-
-# The PREDEFINED tag can be used to specify one or more macro names that 
-# are defined before the preprocessor is started (similar to the -D option of 
-# gcc). The argument of the tag is a list of macros of the form: name 
-# or name=definition (no spaces). If the definition and the = are 
-# omitted =1 is assumed. To prevent a macro definition from being 
-# undefined via #undef or recursively expanded use the := operator 
-# instead of the = operator.
-
-PREDEFINED             = 
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
-# this tag can be used to specify a list of macro names that should be 
expanded. 
-# The macro definition that is found in the sources will be used. 
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED      = 
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
-# doxygen's preprocessor will remove all function-like macros that are alone 
-# on a line, have an all uppercase name, and do not end with a semicolon. Such 
-# function macros are typically used for boiler-plate code, and will confuse 
-# the parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references   
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles. 
-# Optionally an initial location of the external documentation 
-# can be added for each tagfile. The format of a tag file without 
-# this location is as follows: 
-#   TAGFILES = file1 file2 ... 
-# Adding location for the tag files is done as follows: 
-#   TAGFILES = file1=loc1 "file2 = loc2" ... 
-# where "loc1" and "loc2" can be relative or absolute paths or 
-# URLs. If a location is present for each tag, the installdox tool 
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen 
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES               = 
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       = 
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
-# in the class index. If set to NO only the inherited external classes 
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
-# in the modules index. If set to NO, only the current project's groups will 
-# be listed.
-
-EXTERNAL_GROUPS        = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script 
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with 
base 
-# or super classes. Setting the tag to NO turns the diagrams off. Note that 
-# this option is superseded by the HAVE_DOT option below. This is only a 
-# fallback. It is recommended to install and use dot, since it yields more 
-# powerful graphs.
-
-CLASS_DIAGRAMS         = YES
-
-# If set to YES, the inheritance and collaboration graphs will hide 
-# inheritance and usage relations if the target is undocumented 
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
-# available from the path. This tool is part of Graphviz, a graph 
visualization 
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = NO
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect inheritance relations. Setting this tag to YES will force the 
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect implementation dependencies (inheritance, containment, and 
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = YES
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
-# collaboration diagrams in a style similar to the OMG's Unified Modeling 
-# Language.
-
-UML_LOOK               = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the 
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
-# tags are set to YES then doxygen will generate a graph for each documented 
-# file showing the direct and indirect include dependencies of the file with 
-# other documented files.
-
-INCLUDE_GRAPH          = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
-# documented header file showing the documented files that directly or 
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = YES
-
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
-# generate a call dependency graph for every global function or class method. 
-# Note that enabling this option will significantly increase the time of a 
run. 
-# So in most cases it will be better to enable call graphs for selected 
-# functions only using the \callgraph command.
-
-CALL_GRAPH             = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = YES
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
-# then doxygen will show the dependencies a directory has on other directories 
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be 
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH               = 
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that 
-# contain dot files that are included in the documentation (see the 
-# \dotfile command).
-
-DOTFILE_DIRS           = 
-
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
-
-MAX_DOT_GRAPH_WIDTH    = 1024
-
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
-# large images.
-
-MAX_DOT_GRAPH_HEIGHT   = 1024
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
-# graphs generated by dot. A depth value of 3 means that only nodes reachable 
-# from the root by following a path via at most 3 edges will be shown. Nodes 
-# that lay further from the root node will be omitted. Note that setting this 
-# option to 1 or 2 may greatly reduce the computation time needed for large 
-# code bases. Also note that a graph may be further truncated if the graph's 
-# image dimensions are not sufficient to fit the graph (see 
MAX_DOT_GRAPH_WIDTH 
-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 
-# the graph is not depth-constrained.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
-# background. This is disabled by default, which results in a white 
background. 
-# Warning: Depending on the platform used, enabling this option may lead to 
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
-# read).
-
-DOT_TRANSPARENT        = NO
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
-# files in one run (i.e. multiple -o and -T options on the command line). This 
-# makes dot run faster, but since only newer versions of dot (>1.8.10) 
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
-# generate a legend page explaining the meaning of the various boxes and 
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
-# remove the intermediate dot files that are used to generate 
-# the various graphs.
-
-DOT_CLEANUP            = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be 
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE           = NO
diff --git a/docs/Doxyfilter b/docs/Doxyfilter
deleted file mode 100644
index 6a6d50f..0000000
--- a/docs/Doxyfilter
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-#
-# Doxyfilter <source-root> <filename>
-#
-
-dir=$(dirname "$0")
-
-PYFILTER="$dir/pythfilter.py"
-
-if [ "${2/.py/}" != "$2" ]
-then
-    python "$PYFILTER" -r "$1" -f "$2"
-else
-    cat "$2"
-fi
diff --git a/docs/Makefile b/docs/Makefile
index 620a296..053d7af 100644
--- a/docs/Makefile
+++ b/docs/Makefile
@@ -27,9 +27,6 @@ all: build
 .PHONY: build
 build: html txt man-pages figs
 
-.PHONY: dev-docs
-dev-docs: python-dev-docs
-
 .PHONY: html
 html: $(DOC_HTML) html/index.html
 
@@ -45,15 +42,6 @@ figs:
        set -x; $(MAKE) -C figs ; else                   \
        echo "fig2dev (transfig) not installed; skipping figs."; fi
 
-.PHONY: python-dev-docs
-python-dev-docs:
-       @mkdir -v -p api/tools/python
-       @set -e ; if which $(DOXYGEN) 1>/dev/null 2>/dev/null; then \
-        echo "Running doxygen to generate Python tools APIs ... "; \
-       $(DOXYGEN) Doxyfile;                                       \
-       $(MAKE) -C api/tools/python/latex ; else                   \
-        echo "Doxygen not installed; skipping python-dev-docs."; fi
-
 .PHONY: man-pages
 man-pages:
        @if which $(POD2MAN) 1>/dev/null 2>/dev/null; then \
@@ -76,7 +64,6 @@ clean:
        rm -rf .word_count *.aux *.dvi *.bbl *.blg *.glo *.idx *~ 
        rm -rf *.ilg *.log *.ind *.toc *.bak core
        rm -rf html txt
-       rm -rf api
        rm -rf man5
        rm -rf man1
 
diff --git a/docs/html.sty b/docs/html.sty
deleted file mode 100644
index b5f8fbb..0000000
--- a/docs/html.sty
+++ /dev/null
@@ -1,887 +0,0 @@
-%
-% $Id: html.sty,v 1.23 1998/02/26 10:32:24 latex2html Exp $
-% LaTeX2HTML Version 96.2 : html.sty
-% 
-% This file contains definitions of LaTeX commands which are
-% processed in a special way by the translator. 
-% For example, there are commands for embedding external hypertext links,
-% for cross-references between documents or for including raw HTML.
-% This file includes the comments.sty file v2.0 by Victor Eijkhout
-% In most cases these commands do nothing when processed by LaTeX.
-%
-% Place this file in a directory accessible to LaTeX (i.e., somewhere
-% in the TEXINPUTS path.)
-%
-% NOTE: This file works with LaTeX 2.09 or (the newer) LaTeX2e.
-%       If you only have LaTeX 2.09, some complex LaTeX2HTML features
-%       like support for segmented documents are not available.
-
-% Changes:
-% See the change log at end of file.
-
-
-% Exit if the style file is already loaded
-% (suggested by Lee Shombert <las@xxxxxxxxxxxxxxxxxxxxxx>
-\ifx \htmlstyloaded\relax \endinput\else\let\htmlstyloaded\relax\fi
-\makeatletter
-
-\providecommand{\latextohtml}{\LaTeX2\texttt{HTML}}
-
-
-%%% LINKS TO EXTERNAL DOCUMENTS
-%
-% This can be used to provide links to arbitrary documents.
-% The first argumment should be the text that is going to be
-% highlighted and the second argument a URL.
-% The hyperlink will appear as a hyperlink in the HTML 
-% document and as a footnote in the dvi or ps files.
-%
-\newcommand{\htmladdnormallinkfoot}[2]{#1\footnote{#2}} 
-
-
-% This is an alternative definition of the command above which
-% will ignore the URL in the dvi or ps files.
-\newcommand{\htmladdnormallink}[2]{#1}
-
-
-% This command takes as argument a URL pointing to an image.
-% The image will be embedded in the HTML document but will
-% be ignored in the dvi and ps files.
-%
-\newcommand{\htmladdimg}[1]{}
-
-
-%%% CROSS-REFERENCES BETWEEN (LOCAL OR REMOTE) DOCUMENTS
-%
-% This can be used to refer to symbolic labels in other Latex 
-% documents that have already been processed by the translator.
-% The arguments should be:
-% #1 : the URL to the directory containing the external document
-% #2 : the path to the labels.pl file of the external document.
-% If the external document lives on a remote machine then labels.pl 
-% must be copied on the local machine.
-%
-%e.g. \externallabels{http://cbl.leeds.ac.uk/nikos/WWW/doc/tex2html/latex2html}
-%                    {/usr/cblelca/nikos/tmp/labels.pl}
-% The arguments are ignored in the dvi and ps files.
-%
-\newcommand{\externallabels}[2]{}
-
-
-% This complements the \externallabels command above. The argument
-% should be a label defined in another latex document and will be
-% ignored in the dvi and ps files.
-%
-\newcommand{\externalref}[1]{}
-
-
-% Suggested by  Uffe Engberg (http://www.brics.dk/~engberg/)
-% This allows the same effect for citations in external bibliographies.
-% An  \externallabels  command must be given, locating a labels.pl file
-% which defines the location and keys used in the external .html file.
-%  
-\newcommand{\externalcite}{\nocite}
-
-
-%%% HTMLRULE
-% This command adds a horizontal rule and is valid even within
-% a figure caption.
-% Here we introduce a stub for compatibility.
-\newcommand{\htmlrule}{\protect\HTMLrule}
-\newcommand{\HTMLrule}{\@ifstar\htmlrulestar\htmlrulestar}
-\newcommand{\htmlrulestar}[1]{}
-
-% This command adds information within the <BODY> ... </BODY> tag
-%
-\newcommand{\bodytext}[1]{}
-\newcommand{\htmlbody}{}
-
-
-%%% HYPERREF 
-% Suggested by Eric M. Carol <eric@xxxxxxxxxxxxxxxxxxxxx>
-% Similar to \ref but accepts conditional text. 
-% The first argument is HTML text which will become ``hyperized''
-% (underlined).
-% The second and third arguments are text which will appear only in the paper
-% version (DVI file), enclosing the fourth argument which is a reference to a 
label.
-%
-%e.g. \hyperref{using the tracer}{using the tracer (see Section}{)}{trace}
-% where there is a corresponding \label{trace}
-%
-\newcommand{\hyperref}{\hyperrefx[ref]}
-\def\hyperrefx[#1]{{\def\next{#1}%
- \def\tmp{ref}\ifx\next\tmp\aftergroup\hyperrefref
- \else\def\tmp{pageref}\ifx\next\tmp\aftergroup\hyperpageref
- \else\def\tmp{page}\ifx\next\tmp\aftergroup\hyperpageref
- \else\def\tmp{noref}\ifx\next\tmp\aftergroup\hypernoref
- \else\def\tmp{no}\ifx\next\tmp\aftergroup\hypernoref
- \else\typeout{*** unknown option \next\space to  hyperref ***}%
- \fi\fi\fi\fi\fi}}
-\newcommand{\hyperrefref}[4]{#2\ref{#4}#3}
-\newcommand{\hyperpageref}[4]{#2\pageref{#4}#3}
-\newcommand{\hypernoref}[3]{#2}
-
-
-%%% HYPERCITE --- added by RRM
-% Suggested by Stephen Simpson <simpson@xxxxxxxxxxxx>
-% effects the same ideas as in  \hyperref, but for citations.
-% It does not allow an optional argument to the \cite, in LaTeX.
-%
-%   \hypercite{<html-text>}{<LaTeX-text>}{<opt-text>}{<key>}
-%
-% uses the pre/post-texts in LaTeX, with a  \cite{<key>}
-%
-%   \hypercite[ext]{<html-text>}{<LaTeX-text>}{<key>}
-%
-% uses the pre/post-texts in LaTeX, with a  \nocite{<key>}
-% the actual reference comes from an \externallabels  file.
-%
-\newcommand{\hypercite}{\hypercitex[int]}
-\def\hypercitex[#1]{{\def\next{#1}%
- \def\tmp{int}\ifx\next\tmp\aftergroup\hyperciteint
- \else\def\tmp{cite}\ifx\next\tmp\aftergroup\hyperciteint
- \else\def\tmp{ext}\ifx\next\tmp\aftergroup\hyperciteext
- \else\def\tmp{nocite}\ifx\next\tmp\aftergroup\hyperciteext
- \else\def\tmp{no}\ifx\next\tmp\aftergroup\hyperciteext
- \else\typeout{*** unknown option \next\space to  hypercite ***}%
- \fi\fi\fi\fi\fi}}
-\newcommand{\hyperciteint}[4]{#2{\def\tmp{#3}\def\emptyopt{}%
- \ifx\tmp\emptyopt\cite{#4}\else\cite[#3]{#4}\fi}}
-\newcommand{\hyperciteext}[3]{#2\nocite{#3}}
-
-
-
-%%% HTMLREF
-% Reference in HTML version only.
-% Mix between \htmladdnormallink and \hyperref.
-% First arg is text for in both versions, second is label for use in HTML
-% version.
-\newcommand{\htmlref}[2]{#1}
-
-%%% HTMLCITE
-% Reference in HTML version only.
-% Mix between \htmladdnormallink and \hypercite.
-% First arg is text for in both versions, second is citation for use in HTML
-% version.
-\newcommand{\htmlcite}[2]{#1}
-
-
-%%% HTMLIMAGE
-% This command can be used inside any environment that is converted
-% into an inlined image (eg a "figure" environment) in order to change
-% the way the image will be translated. The argument of \htmlimage
-% is really a string of options separated by commas ie 
-% [scale=<scale factor>],[external],[thumbnail=<reduction factor>
-% The scale option allows control over the size of the final image.
-% The ``external'' option will cause the image not to be inlined 
-% (images are inlined by default). External images will be accessible
-% via a hypertext link. 
-% The ``thumbnail'' option will cause a small inlined image to be 
-% placed in the caption. The size of the thumbnail depends on the
-% reduction factor. The use of the ``thumbnail'' option implies
-% the ``external'' option.
-%
-% Example:
-% \htmlimage{scale=1.5,external,thumbnail=0.2}
-% will cause a small thumbnail image 1/5th of the original size to be
-% placed in the final document, pointing to an external image 1.5
-% times bigger than the original.
-% 
-\newcommand{\htmlimage}[1]{}
-
-
-% \htmlborder causes a border to be placed around an image or table
-% when the image is placed within a <TABLE> cell.
-\newcommand{\htmlborder}[1]{}
-
-% Put \begin{makeimage}, \end{makeimage} around LaTeX to ensure its
-% translation into an image.
-% This shields sensitive text from being translated.
-\newenvironment{makeimage}{}{}
-
-
-% A dummy environment that can be useful to alter the order
-% in which commands are processed, in LaTeX2HTML
-\newenvironment{tex2html_deferred}{}{}
-
-
-%%% HTMLADDTONAVIGATION
-% This command appends its argument to the buttons in the navigation
-% panel. It is ignored by LaTeX.
-%
-% Example:
-% \htmladdtonavigation{\htmladdnormallink
-%              {\htmladdimg{http://server/path/to/gif}}
-%              {http://server/path}}
-\newcommand{\htmladdtonavigation}[1]{}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Comment.sty   version 2.0, 19 June 1992
-% selectively in/exclude pieces of text: the user can define new
-% comment versions, and each is controlled separately.
-% This style can be used with plain TeX or LaTeX, and probably
-% most other packages too.
-%
-% Examples of use in LaTeX and TeX follow \endinput
-%
-% Author
-%    Victor Eijkhout
-%    Department of Computer Science
-%    University Tennessee at Knoxville
-%    104 Ayres Hall
-%    Knoxville, TN 37996
-%    USA
-%
-%    eijkhout@xxxxxxxxxx
-%
-% Usage: all text included in between
-%    \comment ... \endcomment
-% or \begin{comment} ... \end{comment}
-% is discarded. The closing command should appear on a line
-% of its own. No starting spaces, nothing after it.
-% This environment should work with arbitrary amounts
-% of comment.
-%
-% Other 'comment' environments are defined by
-% and are selected/deselected with
-% \includecomment{versiona}
-% \excludecoment{versionb}
-%
-% These environments are used as
-% \versiona ... \endversiona
-% or \begin{versiona} ... \end{versiona}
-% with the closing command again on a line of its own.
-%
-% Basic approach:
-% to comment something out, scoop up  every line in verbatim mode
-% as macro argument, then throw it away.
-% For inclusions, both the opening and closing comands
-% are defined as noop
-%
-% Changed \next to \html@next to prevent clashes with other sty files
-% (mike@xxxxxx)
-% Changed \html@next to \htmlnext so the \makeatletter and
-% \makeatother commands could be removed (they were causing other
-% style files - changebar.sty - to crash) (nikos@xxxxxxxxxxxxxxx)
-% Changed \htmlnext back to \html@xxxxxxx
-
-\def\makeinnocent#1{\catcode`#1=12 }
-\def\csarg#1#2{\expandafter#1\csname#2\endcsname}
-
-\def\ThrowAwayComment#1{\begingroup
-    \def\CurrentComment{#1}%
-    \let\do\makeinnocent \dospecials
-    \makeinnocent\^^L% and whatever other special cases
-    \endlinechar`\^^M \catcode`\^^M=12 \xComment}
-{\catcode`\^^M=12 \endlinechar=-1 %
- \gdef\xComment#1^^M{\def\test{#1}\edef\test{\meaning\test}
-      \csarg\ifx{PlainEnd\CurrentComment Test}\test
-          \let\html@next\endgroup
-      \else \csarg\ifx{LaLaEnd\CurrentComment Test}\test
-            \edef\html@next{\endgroup\noexpand\end{\CurrentComment}}
-      \else \csarg\ifx{LaInnEnd\CurrentComment Test}\test
-            \edef\html@next{\endgroup\noexpand\end{\CurrentComment}}
-      \else \let\html@next\xComment
-      \fi \fi \fi \html@next}
-}
-
-\def\includecomment
- #1{\expandafter\def\csname#1\endcsname{}%
-    \expandafter\def\csname end#1\endcsname{}}
-\def\excludecomment
- #1{\expandafter\def\csname#1\endcsname{\ThrowAwayComment{#1}}%
-    {\escapechar=-1\relax
-     \edef\tmp{\string\\end#1}%
-      \csarg\xdef{PlainEnd#1Test}{\meaning\tmp}%
-     \edef\tmp{\string\\end\string\{#1\string\}}%
-      \csarg\xdef{LaLaEnd#1Test}{\meaning\tmp}%
-     \edef\tmp{\string\\end \string\{#1\string\}}%
-      \csarg\xdef{LaInnEnd#1Test}{\meaning\tmp}%
-    }}
-
-\excludecomment{comment}
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% end Comment.sty
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-%
-% Alternative code by Robin Fairbairns, 22 September 1997
-%
-\newcommand\@gobbleenv{\let\reserved@a\@currenvir\@gobble@nv}
-\long\def\@gobble@nv#1\end#2{\def\reserved@b{#2}%
- \ifx\reserved@a\reserved@b
-  \edef\reserved@a{\noexpand\end{\reserved@a}}%
-  \expandafter\reserved@a
- \else
-  \expandafter\@gobble@nv
- \fi}
-
-\renewcommand{\excludecomment}[1]{%
-    \csname newenvironment\endcsname{#1}{\@gobbleenv}{}}
-
-%%% RAW HTML 
-% 
-% Enclose raw HTML between a \begin{rawhtml} and \end{rawhtml}.
-% The html environment ignores its body
-%
-\excludecomment{rawhtml}
-
-
-%%% HTML ONLY
-%
-% Enclose LaTeX constructs which will only appear in the 
-% HTML output and will be ignored by LaTeX with 
-% \begin{htmlonly} and \end{htmlonly}
-%
-\excludecomment{htmlonly}
-% Shorter version
-\newcommand{\html}[1]{}
-
-% for images.tex only
-\excludecomment{imagesonly}
-
-%%% LaTeX ONLY
-% Enclose LaTeX constructs which will only appear in the 
-% DVI output and will be ignored by latex2html with 
-%\begin{latexonly} and \end{latexonly}
-%
-\newenvironment{latexonly}{}{}
-% Shorter version
-\newcommand{\latex}[1]{#1}
-
-
-%%% LaTeX or HTML
-% Combination of \latex and \html.
-% Say \latexhtml{this should be latex text}{this html text}
-%
-%\newcommand{\latexhtml}[2]{#1}
-\long\def\latexhtml#1#2{#1}
-
-
-%%% tracing the HTML conversions
-% This alters the tracing-level within the processing
-% performed by  latex2html  by adjusting  $VERBOSITY
-% (see  latex2html.config  for the appropriate values)
-%
-\newcommand{\htmltracing}[1]{}
-\newcommand{\htmltracenv}[1]{}
-
-
-%%%  \strikeout for HTML only
-% uses <STRIKE>...</STRIKE> tags on the argument
-% LaTeX just gobbles it up.
-\newcommand{\strikeout}[1]{}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%%% JCL - stop input here if LaTeX2e is not present
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-\ifx\if@compatibility\undefined
-  %LaTeX209
-  \makeatother\relax\expandafter\endinput
-\fi
-\if@compatibility
-  %LaTeX2e in LaTeX209 compatibility mode
-  \makeatother\relax\expandafter\endinput
-\fi
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% Start providing LaTeX2e extension:
-% This is currently:
-%  - additional optional argument for \htmladdimg
-%  - support for segmented documents
-%
-
-\ProvidesPackage{html}
-          [1996/12/22 v1.1 hypertext commands for latex2html (nd, hws, rrm)]
-%%%%MG
-
-% This command takes as argument a URL pointing to an image.
-% The image will be embedded in the HTML document but will
-% be ignored in the dvi and ps files.  The optional argument
-% denotes additional HTML tags.
-%
-% Example:  \htmladdimg[ALT="portrait" ALIGN=CENTER]{portrait.gif}
-%
-\renewcommand{\htmladdimg}[2][]{}
-
-%%% HTMLRULE for LaTeX2e
-% This command adds a horizontal rule and is valid even within
-% a figure caption.
-%
-% This command is best used with LaTeX2e and HTML 3.2 support.
-% It is like \hrule, but allows for options via key--value pairs
-% as follows:  \htmlrule[key1=value1, key2=value2, ...] .
-% Use \htmlrule* to suppress the <BR> tag.
-% Eg. \htmlrule[left, 15, 5pt, "none", NOSHADE] produces
-% <BR CLEAR="left"><HR NOSHADE SIZE="15">.
-% Renew the necessary part.
-\renewcommand{\htmlrulestar}[1][all]{}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-%  renew some definitions to allow optional arguments
-%
-% The description of the options is missing, as yet.
-%
-\renewcommand{\latextohtml}{\textup{\LaTeX2\texttt{HTML}}}
-\renewcommand{\htmladdnormallinkfoot}[3][]{#2\footnote{#3}} 
-\renewcommand{\htmladdnormallink}[3][]{#2}
-\renewcommand{\htmlbody}[1][]{}
-\renewcommand{\hyperref}[1][ref]{\hyperrefx[#1]}
-\renewcommand{\hypercite}[1][int]{\hypercitex[#1]}
-\renewcommand{\htmlref}[3][]{#2}
-\renewcommand{\htmlcite}[1]{#1\htmlcitex}
-\newcommand{\htmlcitex}[2][]{{\def\tmp{#1}\ifx\tmp\@empty\else~[#1]\fi}}
-\renewcommand{\htmlimage}[2][]{}
-\renewcommand{\htmlborder}[2][]{}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-%  HTML  HTMLset  HTMLsetenv
-%
-%  These commands do nothing in LaTeX, but can be used to place
-%  HTML tags or set Perl variables during the LaTeX2HTML processing;
-%  They are intended for expert use only.
-
-\newcommand{\HTMLcode}[2][]{}
-\ifx\undefined\HTML\newcommand{\HTML}[2][]{}\else
-\typeout{*** Warning: \string\HTML\space had an incompatible definition ***}%
-\typeout{*** instead use \string\HTMLcode\space for raw HTML code ***}%
-\fi 
-\newcommand{\HTMLset}[3][]{}
-\newcommand{\HTMLsetenv}[3][]{}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-%
-% The following commands pertain to document segmentation, and
-% were added by Herbert Swan <dprhws@xxxxxxxxxxxx> (with help from
-% Michel Goossens <goossens@xxxxxxx>):
-%
-%
-% This command inputs internal latex2html tables so that large
-% documents can to partitioned into smaller (more manageable)
-% segments.
-%
-\newcommand{\internal}[2][internals]{}
-
-%
-%  Define a dummy stub \htmlhead{}.  This command causes latex2html
-%  to define the title of the start of a new segment.  It is not
-%  normally placed in the user's document.  Rather, it is passed to
-%  latex2html via a .ptr file written by \segment.
-%
-\newcommand{\htmlhead}[3][]{}
-
-%  In the LaTeX2HTML version this will eliminate the title line
-%  generated by a \segment command, but retains the title string
-%  for use in other places.
-%
-\newcommand{\htmlnohead}{}
-
-
-%  In the LaTeX2HTML version this put a URL into a <BASE> tag
-%  within the <HEAD>...</HEAD> portion of a document.
-%
-\newcommand{\htmlbase}[1]{}
-%
-
-%
-%  The dummy command \endpreamble is needed by latex2html to
-%  mark the end of the preamble in document segments that do
-%  not contain a \begin{document}
-%
-\newcommand{\startdocument}{}
-
-
-% \tableofchildlinks, \htmlinfo
-%     by Ross Moore  ---  extensions dated 27 September 1997
-%
-%  These do nothing in LaTeX but for LaTeX2HTML they mark 
-%  where the table of child-links and info-page should be placed,
-%  when the user wants other than the default.
-%      \tableofchildlinks       % put mini-TOC at this location
-%      \tableofchildlinks[off]  % not on current page
-%      \tableofchildlinks[none] % not on current and subsequent pages
-%      \tableofchildlinks[on]   % selectively on current page
-%      \tableofchildlinks[all]  % on current and all subsequent pages
-%      \htmlinfo                % put info-page at this location
-%      \htmlinfo[off]           % no info-page in current document
-%      \htmlinfo[none]          % no info-page in current document
-%  *-versions omit the preceding <BR> tag.
-%
-\newcommand{\tableofchildlinks}{%
-  \@ifstar\tableofchildlinksstar\tableofchildlinksstar}
-\newcommand{\tableofchildlinksstar}[1][]{}
-
-\newcommand{\htmlinfo}{\@ifstar\htmlinfostar\htmlinfostar}
-\newcommand{\htmlinfostar}[1][]{}
-
-
-%  This redefines  \begin  to allow for an optional argument
-%  which is used by LaTeX2HTML to specify `style-sheet' information
-
-\let\realLaTeX@begin=\begin
-\renewcommand{\begin}[1][]{\realLaTeX@begin}
-
-
-%
-%  Allocate a new set of section counters, which will get incremented
-%  for "*" forms of sectioning commands, and for a few miscellaneous
-%  commands.
-%
-
-\newcounter{lpart}
-\newcounter{lchapter}[part]
-\@ifundefined{c@chapter}%
- {\let\Hchapter\relax \newcounter{lsection}[part]}%
- {\let\Hchapter=\chapter \newcounter{lsection}[chapter]}
-\newcounter{lsubsection}[section]
-\newcounter{lsubsubsection}[subsection]
-\newcounter{lparagraph}[subsubsection]
-\newcounter{lsubparagraph}[paragraph]
-\newcounter{lequation}
-
-%
-%  Redefine "*" forms of sectioning commands to increment their
-%  respective counters.
-%
-\let\Hpart=\part
-%\let\Hchapter=\chapter
-\let\Hsection=\section
-\let\Hsubsection=\subsection
-\let\Hsubsubsection=\subsubsection
-\let\Hparagraph=\paragraph
-\let\Hsubparagraph=\subparagraph
-\let\Hsubsubparagraph=\subsubparagraph
-
-\ifx\c@subparagraph\undefined
- \newcounter{lsubsubparagraph}[lsubparagraph]
-\else
- \newcounter{lsubsubparagraph}[subparagraph]
-\fi
-
-%
-%  The following definitions are specific to LaTeX2e:
-%  (They must be commented out for LaTeX 2.09)
-%
-\renewcommand{\part}{\@ifstar{\stepcounter{lpart}%
-  \bgroup\def\tmp{*}\H@part}{\bgroup\def\tmp{}\H@part}}
-\newcommand{\H@part}[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hpart\tmp}
-
-\ifx\Hchapter\relax\else
- \def\chapter{\resetsections \@ifstar{\stepcounter{lchapter}%
-   \bgroup\def\tmp{*}\H@chapter}{\bgroup\def\tmp{}\H@chapter}}\fi
-\newcommand{\H@chapter}[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hchapter\tmp}
-
-\renewcommand{\section}{\resetsubsections
- \@ifstar{\stepcounter{lsection}\bgroup\def\tmp{*}%
-   \H@section}{\bgroup\def\tmp{}\H@section}}
-\newcommand{\H@section}[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hsection\tmp}
-
-\renewcommand{\subsection}{\resetsubsubsections
- \@ifstar{\stepcounter{lsubsection}\bgroup\def\tmp{*}%
-   \H@subsection}{\bgroup\def\tmp{}\H@subsection}}
-\newcommand{\H@subsection}[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hsubsection\tmp}
-
-\renewcommand{\subsubsection}{\resetparagraphs
- \@ifstar{\stepcounter{lsubsubsection}\bgroup\def\tmp{*}%
-   \H@subsubsection}{\bgroup\def\tmp{}\H@subsubsection}}
-\newcommand{\H@subsubsection}[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hsubsubsection\tmp}
-
-\renewcommand{\paragraph}{\resetsubparagraphs
- \@ifstar{\stepcounter{lparagraph}\bgroup\def\tmp{*}%
-   \H@paragraph}{\bgroup\def\tmp{}\H@paragraph}}
-\newcommand\H@paragraph[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hparagraph\tmp}
-
-\renewcommand{\subparagraph}{\resetsubsubparagraphs
- \@ifstar{\stepcounter{lsubparagraph}\bgroup\def\tmp{*}%
-   \H@subparagraph}{\bgroup\def\tmp{}\H@subparagraph}}
-\newcommand\H@subparagraph[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hsubparagraph\tmp}
-
-\ifx\Hsubsubparagraph\relax\else\@ifundefined{subsubparagraph}{}{%
-\def\subsubparagraph{%
- \@ifstar{\stepcounter{lsubsubparagraph}\bgroup\def\tmp{*}%
-   \H@subsubparagraph}{\bgroup\def\tmp{}\H@subsubparagraph}}}\fi
-\newcommand\H@subsubparagraph[1][]{\def\tmp@a{#1}\check@align
- \expandafter\egroup\expandafter\Hsubsubparagraph\tmp}
-
-\def\check@align{\def\empty{}\ifx\tmp@a\empty
- \else\def\tmp@b{center}\ifx\tmp@a\tmp@b\let\tmp@a\empty
- \else\def\tmp@b{left}\ifx\tmp@a\tmp@b\let\tmp@a\empty
- \else\def\tmp@b{right}\ifx\tmp@a\tmp@b\let\tmp@a\empty
- \else\expandafter\def\expandafter\tmp@a\expandafter{\expandafter[\tmp@a]}%
- \fi\fi\fi \def\empty{}\ifx\tmp\empty\let\tmp=\tmp@a \else 
-  \expandafter\def\expandafter\tmp\expandafter{\expandafter*\tmp@a}%
- \fi\fi}
-%
-\def\resetsections{\setcounter{section}{0}\setcounter{lsection}{0}%
- \reset@dependents{section}\resetsubsections }
-\def\resetsubsections{\setcounter{subsection}{0}\setcounter{lsubsection}{0}%
- \reset@dependents{subsection}\resetsubsubsections }
-\def\resetsubsubsections{\setcounter{subsubsection}{0}\setcounter{lsubsubsection}{0}%
- \reset@dependents{subsubsection}\resetparagraphs }
-%
-\def\resetparagraphs{\setcounter{lparagraph}{0}\setcounter{lparagraph}{0}%
- \reset@dependents{paragraph}\resetsubparagraphs }
-\def\resetsubparagraphs{\ifx\c@subparagraph\undefined\else
-  \setcounter{subparagraph}{0}\fi \setcounter{lsubparagraph}{0}%
- \reset@dependents{subparagraph}\resetsubsubparagraphs }
-\def\resetsubsubparagraphs{\ifx\c@subsubparagraph\undefined\else
-  \setcounter{subsubparagraph}{0}\fi \setcounter{lsubsubparagraph}{0}}
-%
-\def\reset@dependents#1{\begingroup\let \@elt \@stpelt
- \csname cl@#1\endcsname\endgroup}
-%
-%
-%  Define a helper macro to dump a single \secounter command to a file.
-%
-\newcommand{\DumpPtr}[2]{%
-\count255=\arabic{#1}\def\dummy{dummy}\def\tmp{#2}%
-\ifx\tmp\dummy\else\advance\count255 by \arabic{#2}\fi
-\immediate\write\ptrfile{%
-\noexpand\setcounter{#1}{\number\count255}}}
-
-%
-%  Define a helper macro to dump all counters to the file.
-%  The value for each counter will be the sum of the l-counter
-%      actual LaTeX section counter.
-%  Also dump an \htmlhead{section-command}{section title} command
-%      to the file.
-%
-\newwrite\ptrfile
-\def\DumpCounters#1#2#3#4{%
-\begingroup\let\protect=\noexpand
-\immediate\openout\ptrfile = #1.ptr
-\DumpPtr{part}{lpart}%
-\ifx\Hchapter\relax\else\DumpPtr{chapter}{lchapter}\fi
-\DumpPtr{section}{lsection}%
-\DumpPtr{subsection}{lsubsection}%
-\DumpPtr{subsubsection}{lsubsubsection}%
-\DumpPtr{paragraph}{lparagraph}%
-\DumpPtr{subparagraph}{lsubparagraph}%
-\DumpPtr{equation}{lequation}%
-\DumpPtr{footnote}{dummy}%
-\def\tmp{#4}\ifx\tmp\@empty
-\immediate\write\ptrfile{\noexpand\htmlhead{#2}{#3}}\else
-\immediate\write\ptrfile{\noexpand\htmlhead[#4]{#2}{#3}}\fi
-\dumpcitestatus \dumpcurrentcolor
-\immediate\closeout\ptrfile
-\endgroup }
-
-
-%% interface to natbib.sty
-
-\def\dumpcitestatus{}
-\def\loadcitestatus{\def\dumpcitestatus{%
-  \ifciteindex\immediate\write\ptrfile{\noexpand\citeindextrue}%
-  \else\immediate\write\ptrfile{\noexpand\citeindexfalse}\fi }%
-}
-\@ifpackageloaded{natbib}{\loadcitestatus}{%
- \AtBeginDocument{\@ifpackageloaded{natbib}{\loadcitestatus}{}}}
-
-
-%% interface to color.sty
-
-\def\dumpcurrentcolor{}
-\def\loadsegmentcolors{%
- \let\real@pagecolor=\pagecolor
- \let\pagecolor\segmentpagecolor
- \let\segmentcolor\color
- \ifx\current@page@color\undefined \def\current@page@color{{}}\fi
- \def\dumpcurrentcolor{\bgroup\def\@empty@{{}}%
-   \expandafter\def\expandafter\tmp\space####1@{\def\thiscol{####1}}%
-  \ifx\current@color\@empty@\def\thiscol{}\else
-   \expandafter\tmp\current@color @\fi
-  \immediate\write\ptrfile{\noexpand\segmentcolor{\thiscol}}%
-  \ifx\current@page@color\@empty@\def\thiscol{}\else
-   \expandafter\tmp\current@page@color @\fi
-  \immediate\write\ptrfile{\noexpand\segmentpagecolor{\thiscol}}%
- \egroup}%
- \global\let\loadsegmentcolors=\relax
-}
-
-% These macros are needed within  images.tex  since this inputs
-% the <segment>.ptr files for a segment, so that counters are
-% colors are synchronised.
-%
-\newcommand{\segmentpagecolor}[1][]{%
- \@ifpackageloaded{color}{\loadsegmentcolors\bgroup
-  \def\tmp{#1}\ifx\@empty\tmp\def\next{[]}\else\def\next{[#1]}\fi
-  \expandafter\segmentpagecolor@\next}%
- {\@gobble}}
-\def\segmentpagecolor@[#1]#2{\def\tmp{#1}\def\tmpB{#2}%
- \ifx\tmpB\@empty\let\next=\egroup
- \else
-  \let\realendgroup=\endgroup
-  \def\endgroup{\edef\next{\noexpand\realendgroup
-   \def\noexpand\current@page@color{\current@color}}\next}%
-  \ifx\tmp\@empty\real@pagecolor{#2}\def\model{}%
-  \else\real@pagecolor[#1]{#2}\def\model{[#1]}%
-  \fi
-  \edef\next{\egroup\def\noexpand\current@page@color{\current@page@color}%
-  \noexpand\real@pagecolor\model{#2}}%
- \fi\next}
-%
-\newcommand{\segmentcolor}[2][named]{\@ifpackageloaded{color}%
- {\loadsegmentcolors\segmentcolor[#1]{#2}}{}}
-
-\@ifpackageloaded{color}{\loadsegmentcolors}{\let\real@pagecolor=\@gobble
- \AtBeginDocument{\@ifpackageloaded{color}{\loadsegmentcolors}{}}}
-
-
-%  Define the \segment[align]{file}{section-command}{section-title} command,
-%  and its helper macros.  This command does four things:
-%       1)  Begins a new LaTeX section;
-%       2)  Writes a list of section counters to file.ptr, each
-%           of which represents the sum of the LaTeX section
-%           counters, and the l-counters, defined above;
-%       3)  Write an \htmlhead{section-title} command to file.ptr;
-%       4)  Inputs file.tex.
-
-\def\segment{\@ifstar{\@@htmls}{\@@html}}
-\def\endsegment{}
-\newcommand{\@@htmls}[1][]{\@@htmlsx{#1}}
-\newcommand{\@@html}[1][]{\@@htmlx{#1}}
-\def\@@htmlsx#1#2#3#4{\csname #3\endcsname* {#4}%
-                   \DumpCounters{#2}{#3*}{#4}{#1}\input{#2}}
-\def\@@htmlx#1#2#3#4{\csname #3\endcsname {#4}%
-                   \DumpCounters{#2}{#3}{#4}{#1}\input{#2}}
-
-\makeatother
-\endinput
-
-
-% Modifications:
-%
-% (The listing of Initiales see Changes)
-
-% $Log: html.sty,v $
-% Revision 1.23  1998/02/26 10:32:24  latex2html
-%  --  use \providecommand for  \latextohtml
-%  --  implemented \HTMLcode to do what \HTML did previously
-%      \HTML still works, unless already defined by another package
-%  --  fixed problems remaining with undefined \chapter
-%  --  defined \endsegment
-%
-% Revision 1.22  1997/12/05 11:38:18  RRM
-%  --  implemented an optional argument to \begin for style-sheet info.
-%  --  modified use of an optional argument with sectioning-commands
-%
-% Revision 1.21  1997/11/05 10:28:56  RRM
-%  --  replaced redefinition of \@htmlrule with \htmlrulestar
-%
-% Revision 1.20  1997/10/28 02:15:58  RRM
-%  --  altered the way some special html-macros are defined, so that
-%      star-variants are explicitly defined for LaTeX
-%       -- it is possible for these to occur within  images.tex
-%      e.g. \htmlinfostar \htmlrulestar \tableofchildlinksstar
-%
-% Revision 1.19  1997/10/11 05:47:48  RRM
-%  --  allow the dummy {tex2html_nowrap} environment in LaTeX
-%      use it to make its contents be evaluated in environment order
-%
-% Revision 1.18  1997/10/04 06:56:50  RRM
-%  --  uses Robin Fairbairns' code for ignored environments,
-%      replacing the previous  comment.sty  stuff.
-%  --  extensions to the \tableofchildlinks command
-%  --  extensions to the \htmlinfo command
-%
-% Revision 1.17  1997/07/08 11:23:39  RRM
-%     include value of footnote counter in .ptr files for segments
-%
-% Revision 1.16  1997/07/03 08:56:34  RRM
-%     use \textup  within the \latextohtml macro
-%
-% Revision 1.15  1997/06/15 10:24:58  RRM
-%      new command  \htmltracenv  as environment-ordered \htmltracing
-%
-% Revision 1.14  1997/06/06 10:30:37  RRM
-%  -   new command:  \htmlborder  puts environment into a <TABLE> cell
-%      with a border of specified width, + other attributes.
-%  -   new commands: \HTML  for setting arbitrary HTML tags, with attributes
-%                    \HTMLset  for setting Perl variables, while processing
-%                    \HTMLsetenv  same as \HTMLset , but it gets processed
-%                                 as if it were an environment.
-%  -   new command:  \latextohtml  --- to set the LaTeX2HTML name/logo
-%  -   fixed some remaining problems with \segmentcolor & \segmentpagecolor
-%
-% Revision 1.13  1997/05/19 13:55:46  RRM
-%      alterations and extra options to  \hypercite
-%
-% Revision 1.12  1997/05/09 12:28:39  RRM
-%  -  Added the optional argument to \htmlhead, also in \DumpCounters
-%  -  Implemented \HTMLset as a no-op in LaTeX.
-%  -  Fixed a bug in accessing the page@color settings.
-%
-% Revision 1.11  1997/03/26 09:32:40  RRM
-%  -  Implements LaTeX versions of  \externalcite  and  \hypercite  commands.
-%     Thanks to  Uffe Engberg  and  Stephen Simpson  for the suggestions.
-%
-% Revision 1.10  1997/03/06 07:37:58  RRM
-% Added the  \htmltracing  command, for altering  $VERBOSITY .
-%
-% Revision 1.9  1997/02/17 02:26:26  RRM
-% - changes to counter handling (RRM)
-% - shuffled around some definitions
-% - changed \htmlrule of 209 mode
-%
-% Revision 1.8  1997/01/26 09:04:12  RRM
-% RRM: added optional argument to sectioning commands
-%      \htmlbase  sets the <BASE HREF=...> tag
-%      \htmlinfo  and  \htmlinfo* allow the document info to be positioned
-%
-% Revision 1.7  1997/01/03 12:15:44  L2HADMIN
-% % - fixes to the  color  and  natbib  interfaces
-% % - extended usage of  \hyperref, via an optional argument.
-% % - extended use comment environments to allow shifting expansions
-% %     e.g. within \multicolumn  (`bug' reported by Luc De Coninck).
-% % - allow optional argument to: \htmlimage, \htmlhead,
-% %     \htmladdimg, \htmladdnormallink, \htmladdnormallinkfoot
-% % - added new commands: \htmlbody, \htmlnohead
-% % - added new command: \tableofchildlinks
-%
-% Revision 1.6  1996/12/25 03:04:54  JCL
-% added patches to segment feature from Martin Wilck
-%
-% Revision 1.5  1996/12/23 01:48:06  JCL
-%  o introduced the environment makeimage, which may be used to force
-%    LaTeX2HTML to generate an image from the contents.
-%    There's no magic, all what we have now is a defined empty environment
-%    which LaTeX2HTML will not recognize and thus pass it to images.tex.
-%  o provided \protect to the \htmlrule commands to allow for usage
-%    within captions.
-%
-% Revision 1.4  1996/12/21 19:59:22  JCL
-% - shuffled some entries
-% - added \latexhtml command
-%
-% Revision 1.3  1996/12/21 12:22:59  JCL
-% removed duplicate \htmlrule, changed \htmlrule back not to create a \hrule
-% to allow occurrence in caption
-%
-% Revision 1.2  1996/12/20 04:03:41  JCL
-% changed occurrence of \makeatletter, \makeatother
-% added new \htmlrule command both for the LaTeX2.09 and LaTeX2e
-% sections
-%
-%
-% jcl 30-SEP-96
-%  - Stuck the commands commonly used by both LaTeX versions to the top,
-%    added a check which stops input or reads further if the document
-%    makes use of LaTeX2e.
-%  - Introduced rrm's \dumpcurrentcolor and \bodytext
-% hws 31-JAN-96 - Added support for document segmentation
-% hws 10-OCT-95 - Added \htmlrule command
-% jz 22-APR-94 - Added support for htmlref
-% nd  - Created
diff --git a/docs/pythfilter.py b/docs/pythfilter.py
deleted file mode 100644
index 3054f7c..0000000
--- a/docs/pythfilter.py
+++ /dev/null
@@ -1,658 +0,0 @@
-#!/usr/bin/env python
-
-# pythfilter.py v1.5.5, written by Matthias Baas (baas@xxxxxxxxxx)
-
-# Doxygen filter which can be used to document Python source code.
-# Classes (incl. methods) and functions can be documented.
-# Every comment that begins with ## is literally turned into an
-# Doxygen comment. Consecutive comment lines are turned into
-# comment blocks (-> /** ... */).
-# All the stuff is put inside a namespace with the same name as
-# the source file.
-
-# Conversions:
-# ============
-# ##-blocks                  ->  /** ... */
-# "class name(base): ..."    ->  "class name : public base {...}"
-# "def name(params): ..."    ->  "name(params) {...}"
-
-# Changelog:
-# 21.01.2003: Raw (r"") or unicode (u"") doc string will now be properly
-#             handled. (thanks to Richard Laager for the patch)
-# 22.12.2003: Fixed a bug where no function names would be output for "def"
-#             blocks that were not in a class.
-#             (thanks to Richard Laager for the patch)
-# 12.12.2003: Implemented code to handle static and class methods with
-#             this logic: Methods with "self" as the first argument are
-#             non-static. Methods with "cls" are Python class methods,
-#             which translate into static methods for Doxygen. Other
-#             methods are assumed to be static methods. As should be
-#             obvious, this logic doesn't take into account if the method
-#             is actually setup as a classmethod() or a staticmethod(),
-#             just if it follows the normal conventions.
-#             (thanks to Richard Laager for the patch)
-# 11.12.2003: Corrected #includes to use os.path.sep instead of ".". Corrected
-#             namespace code to use "::" instead of ".".
-#             (thanks to Richard Laager for the patch)
-# 11.12.2003: Methods beginning with two underscores that end with
-#             something other than two underscores are considered private
-#             and are handled accordingly.
-#             (thanks to Richard Laager for the patch)
-# 03.12.2003: The first parameter of class methods (self) is removed from
-#             the documentation.
-# 03.11.2003: The module docstring will be used as namespace documentation
-#             (thanks to Joe Bronkema for the patch)
-# 08.07.2003: Namespaces get a default documentation so that the namespace
-#             and its contents will show up in the generated documentation.
-# 05.02.2003: Directories will be delted during synchronization.
-# 31.01.2003: -f option & filtering entire directory trees.
-# 10.08.2002: In base classes the '.' will be replaced by '::'
-# 18.07.2002: * and ** will be translated into arguments
-# 18.07.2002: Argument lists may contain default values using constructors.
-# 18.06.2002: Support for ## public:
-# 21.01.2002: from ... import will be translated to "using namespace ...;"
-#             TODO: "from ... import *" vs "from ... import names"
-#             TODO: Using normal imports: name.name -> name::name
-# 20.01.2002: #includes will be placed in front of the namespace
-
-######################################################################
-
-# The program is written as a state machine with the following states:
-#
-# - OUTSIDE               The current position is outside any comment,
-#                         class definition or function.
-#
-# - BUILD_COMMENT         Begins with first "##".
-#                         Ends with the first token that is no "##"
-#                         at the same column as before.
-#
-# - BUILD_CLASS_DECL      Begins with "class".
-#                         Ends with ":"
-# - BUILD_CLASS_BODY      Begins just after BUILD_CLASS_DECL.
-#                         The first following token (which is no comment)
-#                         determines indentation depth.
-#                         Ends with a token that has a smaller indendation.
-#
-# - BUILD_DEF_DECL        Begins with "def".
-#                         Ends with ":".
-# - BUILD_DEF_BODY        Begins just after BUILD_DEF_DECL.
-#                         The first following token (which is no comment)
-#                         determines indentation depth.
-#                         Ends with a token that has a smaller indendation.
-
-import getopt
-import glob
-import os.path
-import re
-import shutil
-import string
-import sys
-import token
-import tokenize
-
-from stat import *
-
-OUTSIDE          = 0
-BUILD_COMMENT    = 1
-BUILD_CLASS_DECL = 2
-BUILD_CLASS_BODY = 3
-BUILD_DEF_DECL   = 4
-BUILD_DEF_BODY   = 5
-IMPORT           = 6
-IMPORT_OP        = 7
-IMPORT_APPEND    = 8
-
-# Output file stream
-outfile = sys.stdout
-
-# Output buffer
-outbuffer = []
-
-out_row = 1
-out_col = 0
-
-# Variables used by rec_name_n_param()
-name         = ""
-param        = ""
-doc_string   = ""
-record_state = 0
-bracket_counter = 0
-
-# Tuple: (row,column)
-class_spos  = (0,0)
-def_spos    = (0,0)
-import_spos = (0,0)
-
-# Which import was used? ("import" or "from")
-import_token = ""
-
-# Comment block buffer
-comment_block = []
-comment_finished = 0
-
-# Imported modules
-modules = []
-
-# Program state
-stateStack = [OUTSIDE]
-
-# Keep track of whether module has a docstring
-module_has_docstring = False
-
-# Keep track of member protection
-protection_level = "public"
-private_member = False
-
-# Keep track of the module namespace
-namespace = ""
-
-######################################################################
-# Output string s. '\n' may only be at the end of the string (not
-# somewhere in the middle).
-#
-# In: s    - String
-#     spos - Startpos
-######################################################################
-def output(s,spos, immediate=0):
-    global outbuffer, out_row, out_col, outfile
-
-    os = string.rjust(s,spos[1]-out_col+len(s))
-
-    if immediate:
-        outfile.write(os)
-    else:
-        outbuffer.append(os)
-
-    assert -1 == string.find(s[0:-2], "\n"), s
-
-    if (s[-1:]=="\n"):
-        out_row = out_row+1
-        out_col = 0
-    else:
-        out_col = spos[1]+len(s)
-
-
-######################################################################
-# Records a name and parameters. The name is either a class name or
-# a function name. Then the parameter is either the base class or
-# the function parameters.
-# The name is stored in the global variable "name", the parameters
-# in "param".
-# The variable "record_state" holds the current state of this internal
-# state machine.
-# The recording is started by calling start_recording().
-#
-# In: type, tok
-######################################################################
-def rec_name_n_param(type, tok):
-    global record_state,name,param,doc_string,bracket_counter
-    s = record_state
-    # State 0: Do nothing.
-    if   (s==0):
-         return
-    # State 1: Remember name.
-    elif (s==1):
-        name = tok
-        record_state = 2
-    # State 2: Wait for opening bracket or colon
-    elif (s==2):
-        if (tok=='('):
-            bracket_counter = 1
-            record_state=3
-        if (tok==':'): record_state=4
-    # State 3: Store parameter (or base class) and wait for an ending bracket
-    elif (s==3):
-        if (tok=='*' or tok=='**'):
-            tok=''
-        if (tok=='('):
-            bracket_counter = bracket_counter+1
-        if (tok==')'):
-            bracket_counter = bracket_counter-1
-        if bracket_counter==0:
-            record_state=4
-        else:
-            param=param+tok
-    # State 4: Look for doc string
-    elif (s==4):
-        if (type==token.NEWLINE or type==token.INDENT or 
type==token.SLASHEQUAL):
-            return
-        elif (tok==":"):
-            return
-        elif (type==token.STRING):
-            while tok[:1]=='r' or tok[:1]=='u':
-                tok=tok[1:]
-            while tok[:1]=='"':
-                tok=tok[1:]
-            while tok[-1:]=='"':
-                tok=tok[:-1]
-            doc_string=tok
-        record_state=0
-
-######################################################################
-# Starts the recording of a name & param part.
-# The function rec_name_n_param() has to be fed with tokens. After
-# the necessary tokens are fed the name and parameters can be found
-# in the global variables "name" und "param".
-######################################################################
-def start_recording():
-    global record_state,param,name, doc_string
-    record_state=1
-    name=""
-    param=""
-    doc_string=""
-
-######################################################################
-# Test if recording is finished
-######################################################################
-def is_recording_finished():
-    global record_state
-    return record_state==0
-
-######################################################################
-## Gather comment block
-######################################################################
-def gather_comment(type,tok,spos):
-    global comment_block,comment_finished
-    if (type!=tokenize.COMMENT):
-        comment_finished = 1
-    else:
-        # Output old comment block if a new one is started.
-        if (comment_finished):
-            print_comment(spos)
-            comment_finished=0
-        if (tok[0:2]=="##" and tok[0:3]!="###"):
-            append_comment_lines(tok[2:])
-
-######################################################################
-## Output comment block and empty buffer.
-######################################################################
-def print_comment(spos):
-    global comment_block,comment_finished
-    if (comment_block!=[]):
-        output("/** ",spos)
-        for c in comment_block:
-            output(c,spos)
-        output("*/\n",spos)
-    comment_block    = []
-    comment_finished = 0
-
-######################################################################
-def set_state(s):
-    global stateStack
-    stateStack[len(stateStack)-1]=s
-
-######################################################################
-def get_state():
-    global stateStack
-    return stateStack[len(stateStack)-1]
-
-######################################################################
-def push_state(s):
-    global stateStack
-    stateStack.append(s)
-
-######################################################################
-def pop_state():
-    global stateStack
-    stateStack.pop()
-
-
-######################################################################
-def tok_eater(type, tok, spos, epos, line):
-    global stateStack,name,param,class_spos,def_spos,import_spos
-    global doc_string, modules, import_token, module_has_docstring
-    global protection_level, private_member
-    global out_row
-
-    while out_row + 1 < spos[0]:
-        output("\n", (0, 0))
-
-    rec_name_n_param(type,tok)
-    if (string.replace(string.strip(tok)," ","")=="##private:"):
-         protection_level = "private"
-         output("private:\n",spos)
-    elif (string.replace(string.strip(tok)," ","")=="##protected:"):
-         protection_level = "protected"
-         output("protected:\n",spos)
-    elif (string.replace(string.strip(tok)," ","")=="##public:"):
-         protection_level = "public"
-         output("public:\n",spos)
-    else:
-         gather_comment(type,tok,spos)
-
-    state = get_state()
-
-#    sys.stderr.write("%d: %s\n"%(state, tok))
-
-    # OUTSIDE
-    if   (state==OUTSIDE):
-        if  (tok=="class"):
-            start_recording()
-            class_spos = spos
-            push_state(BUILD_CLASS_DECL)
-        elif (tok=="def"):
-            start_recording()
-            def_spos = spos
-            push_state(BUILD_DEF_DECL)
-        elif (tok=="import") or (tok=="from"):
-            import_token = tok
-            import_spos = spos
-            modules     = []
-            push_state(IMPORT)
-        elif (spos[1] == 0 and tok[:3] == '"""'):
-            # Capture module docstring as namespace documentation
-            module_has_docstring = True
-            append_comment_lines("\\namespace %s\n" % namespace)
-            append_comment_lines(tok[3:-3])
-            print_comment(spos)
-
-    # IMPORT
-    elif (state==IMPORT):
-        if (type==token.NAME):
-            modules.append(tok)
-            set_state(IMPORT_OP)
-    # IMPORT_OP
-    elif (state==IMPORT_OP):
-        if (tok=="."):
-            set_state(IMPORT_APPEND)
-        elif (tok==","):
-            set_state(IMPORT)
-        else:
-            for m in modules:
-                output('#include "'+m.replace('.',os.path.sep)+'.py"\n', 
import_spos, immediate=1)
-                if import_token=="from":
-                    output('using namespace '+m.replace('.', '::')+';\n', 
import_spos)
-            pop_state()
-    # IMPORT_APPEND
-    elif (state==IMPORT_APPEND):
-        if (type==token.NAME):
-            modules[len(modules)-1]+="."+tok
-            set_state(IMPORT_OP)
-    # BUILD_CLASS_DECL
-    elif (state==BUILD_CLASS_DECL):
-        if (is_recording_finished()):
-            s = "class "+name
-            if (param!=""): s = s+" : public "+param.replace('.','::')
-            if (doc_string!=""):
-                append_comment_lines(doc_string)
-            print_comment(class_spos)
-            output(s+"\n",class_spos)
-            output("{\n",(class_spos[0]+1,class_spos[1]))
-            protection_level = "public"
-            output("  public:\n",(class_spos[0]+2,class_spos[1]))
-            set_state(BUILD_CLASS_BODY)
-    # BUILD_CLASS_BODY
-    elif (state==BUILD_CLASS_BODY):
-        if (type!=token.INDENT and type!=token.NEWLINE and type!=40 and
-            type!=tokenize.NL and type!=tokenize.COMMENT and
-            (spos[1]<=class_spos[1])):
-            output("}; // end of class\n",(out_row+1,class_spos[1]))
-            pop_state()
-        elif (tok=="def"):
-            start_recording()
-            def_spos = spos
-            push_state(BUILD_DEF_DECL)
-    # BUILD_DEF_DECL
-    elif (state==BUILD_DEF_DECL):
-        if (is_recording_finished()):
-            param = param.replace("\n", " ")
-            param = param.replace("=", " = ")
-            params = param.split(",")
-            if BUILD_CLASS_BODY in stateStack:
-                if len(name) > 1 \
-                   and name[0:2] == '__' \
-                   and name[len(name)-2:len(name)] != '__' \
-                   and protection_level != 'private':
-                       private_member = True
-                       output("  private:\n",(def_spos[0]+2,def_spos[1]))
-
-            if (doc_string != ""):
-                append_comment_lines(doc_string)
-
-            print_comment(def_spos)
-
-            output_function_decl(name, params)
-#       output("{\n",(def_spos[0]+1,def_spos[1]))
-            set_state(BUILD_DEF_BODY)
-    # BUILD_DEF_BODY
-    elif (state==BUILD_DEF_BODY):
-        if (type!=token.INDENT and type!=token.NEWLINE \
-            and type!=40 and type!=tokenize.NL \
-            and (spos[1]<=def_spos[1])):
-#            output("} // end of method/function\n",(out_row+1,def_spos[1]))
-            if private_member and protection_level != 'private':
-                private_member = False
-                output("  " + protection_level + 
":\n",(def_spos[0]+2,def_spos[1]))
-            pop_state()
-#       else:
-#            output(tok,spos)
-
-
-def output_function_decl(name, params):
-    global def_spos
-
-    # Do we document a class method? then remove the 'self' parameter
-    if params[0] == 'self':
-        preamble = ''
-        params = params[1:]
-    else:
-        preamble = 'static '
-        if params[0] == 'cls':
-            params = params[1:]
-
-    param_string = string.join(params, ", Type ")
-
-    if param_string == '':
-        param_string = '(' + param_string + ');\n'
-    else:
-        param_string = '(Type ' + param_string + ');\n'
-
-    output(preamble, def_spos)
-    output(name, def_spos)
-    output(param_string, def_spos)
-
-
-def append_comment_lines(lines):
-    map(append_comment_line, doc_string.split('\n'))
-
-paramRE = re.compile(r'(@param \w+):')
-
-def append_comment_line(line):
-    global paramRE
-    
-    comment_block.append(paramRE.sub(r'\1', line) + '\n')
-
-def dump(filename):
-    f = open(filename)
-    r = f.readlines()
-    for s in r:
-        sys.stdout.write(s)
-
-def filter(filename):
-    global name, module_has_docstring, source_root
-
-    path,name = os.path.split(filename)
-    root,ext  = os.path.splitext(name)
-
-    if source_root and path.find(source_root) == 0:
-        path = path[len(source_root):]
-
-        if path[0] == os.sep:
-            path = path[1:]
-
-        ns = path.split(os.sep)
-    else:
-        ns = []
-
-    ns.append(root)
-
-    for n in ns:
-        output("namespace " + n + " {\n",(0,0))
-
-    # set module name for tok_eater to use if there's a module doc string
-    name = root
-
-#    sys.stderr.write('Filtering "'+filename+'"...')
-    f = open(filename)
-    tokenize.tokenize(f.readline, tok_eater)
-    f.close()
-    print_comment((0,0))
-
-    output("\n",(0,0))
-    
-    for n in ns:
-        output("}  // end of namespace\n",(0,0))
-
-    if not module_has_docstring:
-        # Put in default namespace documentation
-        output('/** \\namespace '+root+' \n',(0,0))
-        output('    \\brief Module "%s" */\n'%(root),(0,0))
-
-    for s in outbuffer:
-        outfile.write(s)
-
-
-def filterFile(filename, out=sys.stdout):
-    global outfile
-
-    outfile = out
-
-    try:
-        root,ext  = os.path.splitext(filename)
-
-        if ext==".py":
-            filter(filename)
-        else:
-            dump(filename)
-
-#        sys.stderr.write("OK\n")
-    except IOError,e:
-        sys.stderr.write(e[1]+"\n")
-
-
-######################################################################
-
-# preparePath
-def preparePath(path):
-    """Prepare a path.
-
-    Checks if the path exists and creates it if it does not exist.
-    """
-    if not os.path.exists(path):
-        parent = os.path.dirname(path)
-        if parent!="":
-            preparePath(parent)
-        os.mkdir(path)
-
-# isNewer
-def isNewer(file1,file2):
-    """Check if file1 is newer than file2.
-
-    file1 must be an existing file.
-    """
-    if not os.path.exists(file2):
-        return True
-    return os.stat(file1)[ST_MTIME]>os.stat(file2)[ST_MTIME]
-
-# convert
-def convert(srcpath, destpath):
-    """Convert a Python source tree into a C+ stub tree.
-
-    All *.py files in srcpath (including sub-directories) are filtered
-    and written to destpath. If destpath exists, only the files
-    that have been modified are filtered again. Files that were deleted
-    from srcpath are also deleted in destpath if they are still present.
-    The function returns the number of processed *.py files.
-    """
-    count=0
-    sp = os.path.join(srcpath,"*")
-    sfiles = glob.glob(sp)
-    dp = os.path.join(destpath,"*")
-    dfiles = glob.glob(dp)
-    leftovers={}
-    for df in dfiles:
-        leftovers[os.path.basename(df)]=1
-
-    for srcfile in sfiles:
-        basename = os.path.basename(srcfile)
-        if basename in leftovers:
-            del leftovers[basename]
-
-        # Is it a subdirectory?
-        if os.path.isdir(srcfile):
-            sdir = os.path.join(srcpath,basename)
-            ddir = os.path.join(destpath,basename)
-            count+=convert(sdir, ddir)
-            continue
-        # Check the extension (only *.py will be converted)
-        root, ext = os.path.splitext(srcfile)
-        if ext.lower()!=".py":
-            continue
-
-        destfile = os.path.join(destpath,basename)
-        if destfile==srcfile:
-            print "WARNING: Input and output names are identical!"
-            sys.exit(1)
-
-        count+=1
-#        sys.stdout.write("%s\015"%(srcfile))
-
-        if isNewer(srcfile, destfile):
-            preparePath(os.path.dirname(destfile))
-#            out=open(destfile,"w")
-#            filterFile(srcfile, out)
-#            out.close()
-            os.system("python %s -f %s>%s"%(sys.argv[0],srcfile,destfile))
-
-    # Delete obsolete files in destpath
-    for df in leftovers:
-        dname=os.path.join(destpath,df)
-        if os.path.isdir(dname):
-            try:
-                shutil.rmtree(dname)
-            except:
-                print "Can't remove obsolete directory '%s'"%dname
-        else:
-            try:
-                os.remove(dname)
-            except:
-                print "Can't remove obsolete file '%s'"%dname
-
-    return count
-
-
-######################################################################
-######################################################################
-######################################################################
-
-filter_file = False
-source_root = None
-
-try:
-    opts, args = getopt.getopt(sys.argv[1:], "hfr:", ["help"])
-except getopt.GetoptError,e:
-    print e
-    sys.exit(1)
-
-for o,a in opts:
-    if o=="-f":
-        filter_file = True
-
-    if o=="-r":
-        source_root = os.path.abspath(a)
-
-if filter_file:
-    # Filter the specified file and print the result to stdout
-    filename = string.join(args)
-    filterFile(os.path.abspath(filename))
-else:
-
-    if len(args)!=2:
-        sys.stderr.write("%s options input 
output\n"%(os.path.basename(sys.argv[0])))
-        sys.exit(1)
-
-    # Filter an entire Python source tree
-    print '"%s" -> "%s"\n'%(args[0],args[1])
-    c=convert(args[0],args[1])
-    print "%d files"%(c)
-
-- 
1.7.2.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.