|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] rombios unable to loaded MPT BIOS
Hi All,
When tried to pass through 2 mpt2sas HBA to hvm guest, hvmloader
paused with below:
MPT BIOS Fault 09h encountered at adapter PCI(00h,04h,00h)
Press any key to continue...
Checked related codes and mostly like it caused by rombios did not
loaded MPT BIOS properly, and lead MPT BIOS failed to bootup.
config-file of the guest as below:
----------------------------------
# cat vm.cfg
kernel = '/usr/lib/xen/boot/hvmloader'
builder = 'hvm'
device_model = '/usr/lib64/xen/bin/qemu-dm'
vnc=1
vncunused=1
vnclisten="0.0.0.0"
apic=1
acpi=1
pae=1
serial='pty'
vif =
['type=netfront,bridge=priv1','type=netfront,bridge=net1','type=netfront,bridge=net2']
#memory = '32768'
memory = '4096'
name = 'pci-passthrough-dom1'
on_crash = 'destroy'
on_reboot = 'restart'
timer_mode = 0
vcpus=8
pci=['0d:00.0','1f:00.0']
disk =
['file:/OVS/Repositories/oakDom1/System.img,xvda,w','file:/OVS/Repositories/oakDom1/u01.img,xvdb,w','file:/OVS/Repositories/oakDom1/swap.img,xvdc,w']
Device pci info:
----------------
# lspci -nvv -s 0f:00.0
0d:00.0 0107: 1000:0072 (rev 03)
Subsystem: 1000:3050
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at df03c000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df040000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at df080000 [disabled] [size=512K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range BC, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [d0] Vital Product Data
Product Name: SGX-SAS6-INT-Z, Sun StorageTek 6Gb/s SAS PCIe HBA,
Internal
Read-only fields:
[PN] Part number: 375-3640-02
[EC] Engineering changes: 01
[MN] Manufacture ID: 53 75 6e 20 4d 69 63 72 6f 73 79 73 74 65 6d
73 2c 20 49 6e 63 2e
[SN] Serial number: SP14344072
[RV] Reserved: checksum good, 0 byte(s) reserved
End
Capabilities: [a8] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00738 Data: 0000
Capabilities: [c0] MSI-X: Enable- Count=15 Masked-
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003800
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [138 v1] Power Budgeting <?>
Kernel driver in use: pciback
Kernel modules: mpt2sas
# lspci -nvv -s 1f:00.0
1f:00.0 0107: 1000:0072 (rev 03)
Subsystem: 1000:3050
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 32
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at df63c000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df640000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at df680000 [disabled] [size=512K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range BC, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance-ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [d0] Vital Product Data
Product Name: SGX-SAS6-INT-Z, Sun StorageTek 6Gb/s SAS PCIe HBA,
Internal
Read-only fields:
[PN] Part number: 375-3640-02
[EC] Engineering changes: 01
[MN] Manufacture ID: 53 75 6e 20 4d 69 63 72 6f 73 79 73 74 65 6d
73 2c 20 49 6e 63 2e
[SN] Serial number: SP14035588
[RV] Reserved: checksum good, 0 byte(s) reserved
End
Capabilities: [a8] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00758 Data: 0000
Capabilities: [c0] MSI-X: Enable- Count=15 Masked-
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003800
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [138 v1] Power Budgeting <?>
Kernel driver in use: pciback
Kernel modules: mpt2sas
Debug info when xm-create the guest:
-------------------------------------
(XEN) HVM4: HVM Loader
(XEN) HVM4: Detected Xen v4.1.2-OVM
(XEN) HVM4: CPU speed is 3060 MHz
(XEN) HVM4: Xenbus rings @0xfeffc000, event channel 9
(XEN) irq.c:264: Dom4 PCI link 0 changed 0 -> 5
(XEN) HVM4: PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:264: Dom4 PCI link 1 changed 0 -> 10
(XEN) HVM4: PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:264: Dom4 PCI link 2 changed 0 -> 11
(XEN) HVM4: PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:264: Dom4 PCI link 3 changed 0 -> 5
(XEN) HVM4: PCI-ISA link 3 routed to IRQ5
(XEN) HVM4: pci dev 01:3 INTA->IRQ10
(XEN) HVM4: pci dev 03:0 INTA->IRQ5
(XEN) HVM4: pci dev 04:0 INTA->IRQ5
(XEN) HVM4: pci dev 05:0 INTA->IRQ10
(XEN) HVM4: pci dev 02:0 bar 10 size 02000000: f0000008
(XEN) HVM4: pci dev 03:0 bar 14 size 01000000: f2000008
(XEN) HVM4: pci dev 04:0 bar 30 size 00080000: f3000000
(XEN) HVM4: pci dev 05:0 bar 30 size 00080000: f3080000
(XEN) domctl.c:985:d0 memory_map:add: gfn=f3100 mfn=df040 nr_mfns=40
(XEN) HVM4: pci dev 04:0 bar 1c size 00040000: f3100004
(XEN) domctl.c:985:d0 memory_map:add: gfn=f3140 mfn=df640 nr_mfns=40
(XEN) HVM4: pci dev 05:0 bar 1c size 00040000: f3140004
(XEN) domctl.c:985:d0 memory_map:add: gfn=f3180 mfn=df03c nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f3182 mfn=df03e nr_mfns=1
(XEN) HVM4: pci dev 04:0 bar 14 size 00004000: f3180004
(XEN) domctl.c:985:d0 memory_map:add: gfn=f3184 mfn=df63c nr_mfns=4
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f3186 mfn=df63e nr_mfns=1
(XEN) HVM4: pci dev 05:0 bar 14 size 00004000: f3184004
(XEN) HVM4: pci dev 02:0 bar 14 size 00001000: f3188000
(XEN) HVM4: pci dev 03:0 bar 10 size 00000100: 0000c001
(XEN) HVM4: pci dev 04:0 bar 10 size 00000100: 0000c101
(XEN) domctl.c:1041:d0 ioport_map:add f_gport=c100 f_mport=9000 np=100
(XEN) HVM4: pci dev 05:0 bar 10 size 00000100: 0000c201
(XEN) domctl.c:1041:d0 ioport_map:add f_gport=c200 f_mport=d000 np=100
(XEN) HVM4: pci dev 01:1 bar 20 size 00000010: 0000c301
(XEN) HVM4: Multiprocessor initialisation:
(XEN) HVM4: - CPU0 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU1 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU2 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU3 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU4 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU5 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU6 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: - CPU7 ... 40-bit phys ... fixed MTRRs ... var MTRRs [2/8] ...
done.
(XEN) HVM4: Writing SMBIOS tables ...
(XEN) HVM4: Loading ROMBIOS ...
(XEN) HVM4: 10332 bytes of ROMBIOS high-memory extensions:
(XEN) HVM4: Relocating to 0xfc000000-0xfc00285c ... done
(XEN) HVM4: Creating MP tables ...
(XEN) HVM4: Loading Cirrus VGABIOS ...
(XEN) domctl.c:985:d0 memory_map:add: gfn=f3000 mfn=df080 nr_mfns=80
(XEN) HVM4: Loading PCI Option ROM ...
(XEN) HVM4: - Manufacturer: LSI Corporation
(XEN) HVM4: - Product name: LSI MPI Boot Support
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f3000 mfn=df080 nr_mfns=80
(XEN) domctl.c:985:d0 memory_map:add: gfn=f3080 mfn=df680 nr_mfns=80
(XEN) domctl.c:995:d0 memory_map:remove: gfn=f3080 mfn=df680 nr_mfns=80
(XEN) HVM4: Loading ACPI ...
(XEN) HVM4: - Lo data: 000ea020-000ea04f
(XEN) HVM4: - Hi data: fc002c00-fc00eb0f
(XEN) HVM4: vm86 TSS at fc00ec00
(XEN) HVM4: BIOS map:
(XEN) HVM4: c0000-c8fff: VGA BIOS
(XEN) HVM4: c9000-d4fff: PCI Option ROMs
(XEN) HVM4: eb000-eb263: SMBIOS tables
(XEN) HVM4: f0000-fffff: Main BIOS
(XEN) HVM4: E820 table:
(XEN) HVM4: [00]: 00000000:00000000 - 00000000:0009e000: RAM
(XEN) HVM4: [01]: 00000000:0009e000 - 00000000:0009fc00: RESERVED
(XEN) HVM4: [02]: 00000000:0009fc00 - 00000000:000a0000: RESERVED
(XEN) HVM4: HOLE: 00000000:000a0000 - 00000000:000e0000
(XEN) HVM4: [03]: 00000000:000e0000 - 00000000:00100000: RESERVED
(XEN) HVM4: [04]: 00000000:00100000 - 00000000:f0000000: RAM
(XEN) HVM4: HOLE: 00000000:f0000000 - 00000000:fc000000
(XEN) HVM4: [05]: 00000000:fc000000 - 00000001:00000000: RESERVED
(XEN) HVM4: [06]: 00000001:00000000 - 00000001:10000000: RAM
(XEN) HVM4: Invoking ROMBIOS ...
(XEN) HVM4: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) stdvga.c:147:d4 entering stdvga and caching modes
(XEN) HVM4: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $
(XEN) HVM4: Bochs BIOS - build: 06/23/99
(XEN) HVM4: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
(XEN) HVM4: Options: apmbios pcibios eltorito PMM
(XEN) HVM4:
(XEN) HVM4: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM4: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (60000 MBytes)
(XEN) HVM4: ata0-1: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM4: ata0 slave: QEMU HARDDISK ATA-7 Hard-Disk ( 97 GBytes)
(XEN) HVM4: ata1-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
(XEN) HVM4: ata1 master: QEMU HARDDISK ATA-7 Hard-Disk (20000 MBytes)
(XEN) HVM4: IDE time out
(XEN) HVM4:
(XEN) HVM4: PCI device 1000:0070 not found at index 0
(XEN) HVM4: PCI device 1000:0072 not found at index 2
(XEN) HVM4: PCI device 1000:0074 not found at index 0
(XEN) HVM4: PCI device 1000:0076 not found at index 0
(XEN) HVM4: PCI device 1000:0077 not found at index 0
(XEN) HVM4: PCI device 1000:0064 not found at index 0
(XEN) HVM4: PCI device 1000:0065 not found at index 0
(XEN) HVM4: PCI device 1000:0080 not found at index 0
(XEN) HVM4: PCI device 1000:0081 not found at index 0
(XEN) HVM4: PCI device 1000:0082 not found at index 0
(XEN) HVM4: PCI device 1000:0083 not found at index 0
(XEN) HVM4: PCI device 1000:0084 not found at index 0
(XEN) HVM4: PCI device 1000:0085 not found at index 0
(XEN) HVM4: PCI device 1000:0086 not found at index 0
(XEN) HVM4: PCI device 1000:0087 not found at index 0
(XEN) HVM4:
(XEN) HVM4:
(XEN) HVM4: Press F12 for boot menu.
(XEN) HVM4:
(XEN) HVM4: Booting from Hard Disk...
(XEN) HVM4: Booting from 0000:7c00
(XEN) HVM4: int13_harddisk: function 41, unmapped device for ELDL=83
(XEN) HVM4: int13_harddisk: function 08, unmapped device for ELDL=83
(XEN) HVM4: *** int 15h function AX=00c0, BX=0000 not yet supported!
(XEN) HVM4: *** int 15h function AX=ec00, BX=0002 not yet supported!
(XEN) HVM4: KBD: unsupported int 16h function 03
(XEN) HVM4: *** int 15h function AX=e980, BX=0000 not yet supported!
(XEN) HVM4: int13_harddisk: function 41, unmapped device for ELDL=83
(XEN) HVM4: int13_harddisk: function 02, unmapped device for ELDL=83
(XEN) HVM4: int13_harddisk: function 41, unmapped device for ELDL=84
(XEN) HVM4: int13_harddisk: function 02, unmapped device for ELDL=84
(XEN) HVM4: int13_harddisk: function 41, unmapped device for ELDL=85
(XEN) HVM4: int13_harddisk: function 02, unmapped device for ELDL=85
(XEN) HVM4: int13_harddisk: function 41, unmapped device for ELDL=86
(XEN) HVM4: int13_harddisk: function 02, unmapped device for ELDL=86
(XEN) HVM4: int13_harddisk: function 41, unmapped device for ELDL=87
(XEN) HVM4: int13_harddisk: function 02, unmapped device for ELDL=87
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 88
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 88
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 89
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 89
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 8a
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 8a
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 8b
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 8b
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 8c
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 8c
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 8d
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 8d
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 8e
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 8e
(XEN) HVM4: int13_harddisk: function 41, ELDL out of range 8f
(XEN) HVM4: int13_harddisk: function 02, ELDL out of range 8f
(XEN) irq.c:330: Dom4 callback via changed to Direct Vector 0xe9
(XEN) domctl.c:1065:d0 ioport_map:remove f_gport=c100 f_mport=9000 np=100
(XEN) domctl.c:1041:d0 ioport_map:add f_gport=c100 f_mport=9000 np=100
(XEN) domctl.c:1065:d0 ioport_map:remove f_gport=c200 f_mport=d000 np=100
(XEN) domctl.c:1041:d0 ioport_map:add f_gport=c200 f_mport=d000 np=100
(XEN) irq.c:264: Dom4 PCI link 0 changed 5 -> 0
(XEN) irq.c:264: Dom4 PCI link 1 changed 10 -> 0
(XEN) irq.c:264: Dom4 PCI link 2 changed 11 -> 0
(XEN) irq.c:264: Dom4 PCI link 3 changed 5 -> 0
(XEN) msi.c:867: MSI is already in use on device 0d:00.0
(XEN) msi.c:867: MSI is already in use on device 1f:00.0
qemu log:
----------
# cat /var/log/xen/qemu-dm-oakDom1.log
domid: 4
Using xvda for guest's hda
Using file /OVS/Repositories/oakDom1/System.img in read-write mode
Using xvdb for guest's hdb
Using file /OVS/Repositories/oakDom1/u01.img in read-write mode
Using xvdc for guest's hdc
Using file /OVS/Repositories/oakDom1/swap.img in read-write mode
Watching /local/domain/0/device-model/4/logdirty/cmd
Watching /local/domain/0/device-model/4/command
Watching /local/domain/4/cpu
char device redirected to /dev/pts/1
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 21f8dda2-cb14-5887-bddf-d3a45aa42311
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/4/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error.
/vm/21f8dda2-cb14-5887-bddf-d3a45aa42311/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/4/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/4/log-throttling'
medium change watch on `/local/domain/4/log-throttling' - unknown device,
ignored
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 0d:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such
file or directory: 0xd:0x0.0x0
pt_register_regions: IO region registered (size=0x00000100
base_addr=0x00009001)
pt_register_regions: IO region registered (size=0x00004000
base_addr=0xdf03c004)
pt_register_regions: IO region registered (size=0x00040000
base_addr=0xdf040004)
pt_register_regions: Expansion ROM registered (size=0x00080000
base_addr=0xdf080000)
pt_msix_init: get MSI-X table bar base df03c000
pt_msix_init: table_off = 2000, total_entries = 15
pt_msix_init: errno = 2
pt_msix_init: mapping physical MSI-X table to 7fd7738ea000
pt_msi_setup: msi mapped with pirq 4f
pci_intx: intx=1
register_real_device: Real physical device 0d:00.0 registered successfuly!
IRQ type = MSI-INTx
dm-command: hot insert pass-through pci dev
register_real_device: Assigning real physical device 1f:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such
file or directory: 0x1f:0x0.0x0
pt_register_regions: IO region registered (size=0x00000100
base_addr=0x0000d001)
pt_register_regions: IO region registered (size=0x00004000
base_addr=0xdf63c004)
pt_register_regions: IO region registered (size=0x00040000
base_addr=0xdf640004)
pt_register_regions: Expansion ROM registered (size=0x00080000
base_addr=0xdf680000)
pt_msix_init: get MSI-X table bar base df63c000
pt_msix_init: table_off = 2000, total_entries = 15
pt_msix_init: errno = 2
pt_msix_init: mapping physical MSI-X table to 7fd7738e9000
pt_msi_setup: msi mapped with pirq 4e
pci_intx: intx=1
register_real_device: Real physical device 1f:00.0 registered successfuly!
IRQ type = MSI-INTx
char device redirected to /dev/pts/2
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
pt_iomem_map: e_phys=f3100000 maddr=df040000 type=0 len=262144 index=3
first_map=1
pt_iomem_map: e_phys=f3140000 maddr=df640000 type=0 len=262144 index=3
first_map=1
pt_iomem_map: e_phys=f3180000 maddr=df03c000 type=0 len=16384 index=1
first_map=1
pt_iomem_map: e_phys=f3184000 maddr=df63c000 type=0 len=16384 index=1
first_map=1
pt_ioport_map: e_phys=c100 pio_base=9000 len=256 index=0 first_map=1
pt_ioport_map: e_phys=c200 pio_base=d000 len=256 index=0 first_map=1
Overlapped to device[00:05.0][Region:6][Address:f3080000h][Size:00080000h]
pt_bar_mapping_one: Warning:
ptdev[00:04.0][Region:6][Address:f3000001h][Size:00080000h] is overlapped.
pt_iomem_map: e_phys=f3000001 maddr=df080000 type=8 len=524288 index=6
first_map=1
pt_iomem_map: e_phys=ffffffff maddr=df080000 type=8 len=524288 index=6
first_map=0
Overlapped to device[00:04.0][Region:3][Address:f3100000h][Size:00040000h]
pt_bar_mapping_one: Warning:
ptdev[00:05.0][Region:6][Address:f3080001h][Size:00080000h] is overlapped.
pt_iomem_map: e_phys=f3080001 maddr=df680000 type=8 len=524288 index=6
first_map=1
pt_iomem_map: e_phys=ffffffff maddr=df680000 type=8 len=524288 index=6
first_map=0
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Unknown PV product 3 loaded in guest
PV driver build 1
pt_ioport_map: e_phys=ffff pio_base=9000 len=256 index=0 first_map=0
pt_ioport_map: e_phys=c100 pio_base=9000 len=256 index=0 first_map=0
pt_ioport_map: e_phys=ffff pio_base=d000 len=256 index=0 first_map=0
pt_ioport_map: e_phys=c200 pio_base=d000 len=256 index=0 first_map=0
pt_msixctrl_reg_write: guest enabling MSI-X, disable MSI-INTx translation
pci_intx: intx=1
pt_msix_update_one: Update msix entry 0 with pirq 4d gvec 59
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already
function.
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already
function.
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already
function.
pt_msixctrl_reg_write: guest enabling MSI-X, disable MSI-INTx translation
pci_intx: intx=1
pt_msix_update_one: Update msix entry 0 with pirq 4c gvec 69
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already
function.
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already
function.
pci_msix_writel: Error: Can't update msix entry 0 since MSI-X is already
function.
pt_msix_update_one: Update msix entry 0 with pirq 4d gvec 71
pt_msix_update_one: Update msix entry 0 with pirq 4c gvec 79
Any input will appreciate!
Joe
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |