[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] txftrans.c:4498 -- TXF_HARD_ERROR

On Tue, Jan 15, 2013 at 4:03 PM, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote:
On Fri, 2013-01-11 at 19:05 +0000, Rushikesh Jadhav wrote:

> Its a simple Windows 2008 VM with default xs-tools PV drivers hosted
> on XCP1.1 with Xen 3.4.2. It has 2 drives Local C: and iSCSI LUN D:
> Local VM Disk format is lvm over iscsi and the extra disk is directly
> mounted via iSCSI using iSCSI initiator within VM.

Is there anything other than this one message in the logs?

Have you looked into Windows own logging (event viewer et al?). If you
could determine which filesystem was causing this error that might give
you something to go on.

The iSCSI target is the same for both C: and D:, just the method of
connecting is different?


There is no other error besides this one.

I checked windows event viewer but there was no message related to NTFS, may be it is in "Info" type and I'll probably need to search by some event ID. I'll give another try.

C: is the normal VHD on xen. Its same as you boot a VM from local SR.
D: is the one which uses iSCSI LUN. I hope I'm not confusing.
Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.