[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 03 of 10 v2] xen: sched_credit: let the scheduler know about node-affinity



Am 19.12.2012 20:07, schrieb Dario Faggioli:
As vcpu-affinity tells where VCPUs must run, node-affinity tells
where they should or, better, prefer. While respecting vcpu-affinity
remains mandatory, node-affinity is not that strict, it only expresses
a preference, although honouring it is almost always true that will
bring significant performances benefit (especially as compared to
not having any affinity at all).

This change modifies the VCPU load balancing algorithm (for the
credit scheduler only), introducing a two steps logic.
During the first step, we use the node-affinity mask. The aim is
giving precedence to the CPUs where it is known to be preferable
for the domain to run. If that fails in finding a valid PCPU, the
node-affinity is just ignored and, in the second step, we fall
back to using cpu-affinity only.

Signed-off-by: Dario Faggioli<dario.faggioli@xxxxxxxxxx>
---
Changes from v1:
  * CPU masks variables moved off from the stack, as requested during
    review. As per the comments in the code, having them in the private
    (per-scheduler instance) struct could have been enough, but it would be
    racy (again, see comments). For that reason, use a global bunch of
    them of (via per_cpu());

Wouldn't it be better to put the mask in the scheduler private per-pcpu area?
This could be applied to several other instances of cpu masks on the stack,
too.

  * George suggested a different load balancing logic during v1's review. I
    think he was right and then I changed the old implementation in a way
    that resembles exactly that. I rewrote most of this patch to introduce
    a more sensible and effective noda-affinity handling logic.

diff --git a/xen/common/sched_credit.c b/xen/common/sched_credit.c
--- a/xen/common/sched_credit.c
+++ b/xen/common/sched_credit.c
@@ -111,6 +111,33 @@


  /*
+ * Node Balancing
+ */
+#define CSCHED_BALANCE_CPU_AFFINITY     0
+#define CSCHED_BALANCE_NODE_AFFINITY    1
+#define CSCHED_BALANCE_LAST CSCHED_BALANCE_NODE_AFFINITY
+
+/*
+ * When building for high number of CPUs, cpumask_var_t
+ * variables on stack are better avoided. However, we need them,
+ * in order to be able to consider both vcpu and node affinity.
+ * We also don't want to xmalloc()/xfree() them, as that would
+ * happen in critical code paths. Therefore, let's (pre)allocate
+ * some scratch space for them.
+ *
+ * Having one mask for each instance of the scheduler seems
+ * enough, and that would suggest putting it wihin `struct
+ * csched_private' below. However, we don't always hold the
+ * private scheduler lock when the mask itself would need to
+ * be used, leaving room for races. For that reason, we define
+ * and use a cpumask_t for each CPU. As preemption is not an
+ * issue here (we're holding the runqueue spin-lock!), that is
+ * both enough and safe.
+ */
+DEFINE_PER_CPU(cpumask_t, csched_balance_mask);
+#define scratch_balance_mask (this_cpu(csched_balance_mask))
+
+/*
   * Boot parameters
   */
  static int __read_mostly sched_credit_tslice_ms = CSCHED_DEFAULT_TSLICE_MS;
@@ -159,6 +186,9 @@ struct csched_dom {
      struct list_head active_vcpu;
      struct list_head active_sdom_elem;
      struct domain *dom;
+    /* cpumask translated from the domain's node-affinity.
+     * Basically, the CPUs we prefer to be scheduled on. */
+    cpumask_var_t node_affinity_cpumask;
      uint16_t active_vcpu_count;
      uint16_t weight;
      uint16_t cap;
@@ -239,6 +269,42 @@ static inline void
      list_del_init(&svc->runq_elem);
  }

+#define for_each_csched_balance_step(__step) \
+    for ( (__step) = CSCHED_BALANCE_LAST; (__step)>= 0; (__step)-- )
+
+/*
+ * Each csched-balance step has to use its own cpumask. This function
+ * determines which one, given the step, and copies it in mask. Notice
+ * that, in case of node-affinity balancing step, it also filters out from
+ * the node-affinity mask the cpus that are not part of vc's cpu-affinity,
+ * as we do not want to end up running a vcpu where it would like, but
+ * is not allowed to!
+ *
+ * As an optimization, if a domain does not have any node-affinity at all
+ * (namely, its node affinity is automatically computed), not only the
+ * computed mask will reflect its vcpu-affinity, but we also return -1 to
+ * let the caller know that he can skip the step or quit the loop (if he
+ * wants).
+ */
+static int
+csched_balance_cpumask(const struct vcpu *vc, int step, cpumask_t *mask)
+{
+    if ( step == CSCHED_BALANCE_NODE_AFFINITY )
+    {
+        struct domain *d = vc->domain;
+        struct csched_dom *sdom = CSCHED_DOM(d);
+
+        cpumask_and(mask, sdom->node_affinity_cpumask, vc->cpu_affinity);
+
+        if ( cpumask_full(sdom->node_affinity_cpumask) )
+            return -1;
+    }
+    else /* step == CSCHED_BALANCE_CPU_AFFINITY */
+        cpumask_copy(mask, vc->cpu_affinity);
+
+    return 0;
+}
+
  static void burn_credits(struct csched_vcpu *svc, s_time_t now)
  {
      s_time_t delta;
@@ -266,67 +332,94 @@ static inline void
      struct csched_vcpu * const cur = CSCHED_VCPU(curr_on_cpu(cpu));
      struct csched_private *prv = CSCHED_PRIV(per_cpu(scheduler, cpu));
      cpumask_t mask, idle_mask;
-    int idlers_empty;
+    int balance_step, idlers_empty;

      ASSERT(cur);
-    cpumask_clear(&mask);
-
      idlers_empty = cpumask_empty(prv->idlers);

      /*
-     * If the pcpu is idle, or there are no idlers and the new
-     * vcpu is a higher priority than the old vcpu, run it here.
-     *
-     * If there are idle cpus, first try to find one suitable to run
-     * new, so we can avoid preempting cur.  If we cannot find a
-     * suitable idler on which to run new, run it here, but try to
-     * find a suitable idler on which to run cur instead.
+     * Node and vcpu-affinity balancing loop. To speed things up, in case
+     * no node-affinity at all is present, scratch_balance_mask reflects
+     * the vcpu-affinity, and ret is -1, so that we then can quit the
+     * loop after only one step.
       */
-    if ( cur->pri == CSCHED_PRI_IDLE
-         || (idlers_empty&&  new->pri>  cur->pri) )
+    for_each_csched_balance_step( balance_step )
      {
-        if ( cur->pri != CSCHED_PRI_IDLE )
-            SCHED_STAT_CRANK(tickle_idlers_none);
-        cpumask_set_cpu(cpu,&mask);
-    }
-    else if ( !idlers_empty )
-    {
-        /* Check whether or not there are idlers that can run new */
-        cpumask_and(&idle_mask, prv->idlers, new->vcpu->cpu_affinity);
+        int ret, new_idlers_empty;
+
+        cpumask_clear(&mask);

          /*
-         * If there are no suitable idlers for new, and it's higher
-         * priority than cur, ask the scheduler to migrate cur away.
-         * We have to act like this (instead of just waking some of
-         * the idlers suitable for cur) because cur is running.
+         * If the pcpu is idle, or there are no idlers and the new
+         * vcpu is a higher priority than the old vcpu, run it here.
           *
-         * If there are suitable idlers for new, no matter priorities,
-         * leave cur alone (as it is running and is, likely, cache-hot)
-         * and wake some of them (which is waking up and so is, likely,
-         * cache cold anyway).
+         * If there are idle cpus, first try to find one suitable to run
+         * new, so we can avoid preempting cur.  If we cannot find a
+         * suitable idler on which to run new, run it here, but try to
+         * find a suitable idler on which to run cur instead.
           */
-        if ( cpumask_empty(&idle_mask)&&  new->pri>  cur->pri )
+        if ( cur->pri == CSCHED_PRI_IDLE
+             || (idlers_empty&&  new->pri>  cur->pri) )
          {
-            SCHED_STAT_CRANK(tickle_idlers_none);
-            SCHED_VCPU_STAT_CRANK(cur, kicked_away);
-            SCHED_VCPU_STAT_CRANK(cur, migrate_r);
-            SCHED_STAT_CRANK(migrate_kicked_away);
-            set_bit(_VPF_migrating,&cur->vcpu->pause_flags);
+            if ( cur->pri != CSCHED_PRI_IDLE )
+                SCHED_STAT_CRANK(tickle_idlers_none);
              cpumask_set_cpu(cpu,&mask);
          }
-        else if ( !cpumask_empty(&idle_mask) )
+        else if ( !idlers_empty )
          {
-            /* Which of the idlers suitable for new shall we wake up? */
-            SCHED_STAT_CRANK(tickle_idlers_some);
-            if ( opt_tickle_one_idle )
+            /* Are there idlers suitable for new (for this balance step)? */
+            ret = csched_balance_cpumask(new->vcpu, balance_step,
+&scratch_balance_mask);
+            cpumask_and(&idle_mask, prv->idlers,&scratch_balance_mask);
+            new_idlers_empty = cpumask_empty(&idle_mask);
+
+            /*
+             * Let's not be too harsh! If there aren't idlers suitable
+             * for new in its node-affinity mask, make sure we check its
+             * vcpu-affinity as well, before tacking final decisions.
+             */
+            if ( new_idlers_empty
+&&  (balance_step == CSCHED_BALANCE_NODE_AFFINITY&&  !ret) )
+                continue;
+
+            /*
+             * If there are no suitable idlers for new, and it's higher
+             * priority than cur, ask the scheduler to migrate cur away.
+             * We have to act like this (instead of just waking some of
+             * the idlers suitable for cur) because cur is running.
+             *
+             * If there are suitable idlers for new, no matter priorities,
+             * leave cur alone (as it is running and is, likely, cache-hot)
+             * and wake some of them (which is waking up and so is, likely,
+             * cache cold anyway).
+             */
+            if ( new_idlers_empty&&  new->pri>  cur->pri )
              {
-                this_cpu(last_tickle_cpu) =
-                    cpumask_cycle(this_cpu(last_tickle_cpu),&idle_mask);
-                cpumask_set_cpu(this_cpu(last_tickle_cpu),&mask);
+                SCHED_STAT_CRANK(tickle_idlers_none);
+                SCHED_VCPU_STAT_CRANK(cur, kicked_away);
+                SCHED_VCPU_STAT_CRANK(cur, migrate_r);
+                SCHED_STAT_CRANK(migrate_kicked_away);
+                set_bit(_VPF_migrating,&cur->vcpu->pause_flags);
+                cpumask_set_cpu(cpu,&mask);
              }
-            else
-                cpumask_or(&mask,&mask,&idle_mask);
+            else if ( !new_idlers_empty )
+            {
+                /* Which of the idlers suitable for new shall we wake up? */
+                SCHED_STAT_CRANK(tickle_idlers_some);
+                if ( opt_tickle_one_idle )
+                {
+                    this_cpu(last_tickle_cpu) =
+                        cpumask_cycle(this_cpu(last_tickle_cpu),&idle_mask);
+                    cpumask_set_cpu(this_cpu(last_tickle_cpu),&mask);
+                }
+                else
+                    cpumask_or(&mask,&mask,&idle_mask);
+            }
          }
+
+        /* Did we find anyone (or csched_balance_cpumask() says we're done)? */
+        if ( !cpumask_empty(&mask) || ret )
+            break;
      }

      if ( !cpumask_empty(&mask) )
@@ -475,15 +568,28 @@ static inline int
  }

  static inline int
-__csched_vcpu_is_migrateable(struct vcpu *vc, int dest_cpu)
+__csched_vcpu_is_migrateable(struct vcpu *vc, int dest_cpu, cpumask_t *mask)
  {
      /*
       * Don't pick up work that's in the peer's scheduling tail or hot on
-     * peer PCPU. Only pick up work that's allowed to run on our CPU.
+     * peer PCPU. Only pick up work that prefers and/or is allowed to run
+     * on our CPU.
       */
      return !vc->is_running&&
             !__csched_vcpu_is_cache_hot(vc)&&
-           cpumask_test_cpu(dest_cpu, vc->cpu_affinity);
+           cpumask_test_cpu(dest_cpu, mask);
+}
+
+static inline int
+__csched_vcpu_should_migrate(int cpu, cpumask_t *mask, cpumask_t *idlers)
+{
+    /*
+     * Consent to migration if cpu is one of the idlers in the VCPU's
+     * affinity mask. In fact, if that is not the case, it just means it
+     * was some other CPU that was tickled and should hence come and pick
+     * VCPU up. Migrating it to cpu would only make things worse.
+     */
+    return cpumask_test_cpu(cpu, idlers)&&  cpumask_test_cpu(cpu, mask);
  }

  static int
@@ -493,85 +599,98 @@ static int
      cpumask_t idlers;
      cpumask_t *online;
      struct csched_pcpu *spc = NULL;
+    int ret, balance_step;
      int cpu;

-    /*
-     * Pick from online CPUs in VCPU's affinity mask, giving a
-     * preference to its current processor if it's in there.
-     */
      online = cpupool_scheduler_cpumask(vc->domain->cpupool);
-    cpumask_and(&cpus, online, vc->cpu_affinity);
-    cpu = cpumask_test_cpu(vc->processor,&cpus)
-            ? vc->processor
-            : cpumask_cycle(vc->processor,&cpus);
-    ASSERT( !cpumask_empty(&cpus)&&  cpumask_test_cpu(cpu,&cpus) );
+    for_each_csched_balance_step( balance_step )
+    {
+        /* Pick an online CPU from the proper affinity mask */
+        ret = csched_balance_cpumask(vc, balance_step,&cpus);
+        cpumask_and(&cpus,&cpus, online);

-    /*
-     * Try to find an idle processor within the above constraints.
-     *
-     * In multi-core and multi-threaded CPUs, not all idle execution
-     * vehicles are equal!
-     *
-     * We give preference to the idle execution vehicle with the most
-     * idling neighbours in its grouping. This distributes work across
-     * distinct cores first and guarantees we don't do something stupid
-     * like run two VCPUs on co-hyperthreads while there are idle cores
-     * or sockets.
-     *
-     * Notice that, when computing the "idleness" of cpu, we may want to
-     * discount vc. That is, iff vc is the currently running and the only
-     * runnable vcpu on cpu, we add cpu to the idlers.
-     */
-    cpumask_and(&idlers,&cpu_online_map, CSCHED_PRIV(ops)->idlers);
-    if ( vc->processor == cpu&&  IS_RUNQ_IDLE(cpu) )
-        cpumask_set_cpu(cpu,&idlers);
-    cpumask_and(&cpus,&cpus,&idlers);
-    cpumask_clear_cpu(cpu,&cpus);
+        /* If present, prefer vc's current processor */
+        cpu = cpumask_test_cpu(vc->processor,&cpus)
+                ? vc->processor
+                : cpumask_cycle(vc->processor,&cpus);
+        ASSERT( !cpumask_empty(&cpus)&&  cpumask_test_cpu(cpu,&cpus) );

-    while ( !cpumask_empty(&cpus) )
-    {
-        cpumask_t cpu_idlers;
-        cpumask_t nxt_idlers;
-        int nxt, weight_cpu, weight_nxt;
-        int migrate_factor;
+        /*
+         * Try to find an idle processor within the above constraints.
+         *
+         * In multi-core and multi-threaded CPUs, not all idle execution
+         * vehicles are equal!
+         *
+         * We give preference to the idle execution vehicle with the most
+         * idling neighbours in its grouping. This distributes work across
+         * distinct cores first and guarantees we don't do something stupid
+         * like run two VCPUs on co-hyperthreads while there are idle cores
+         * or sockets.
+         *
+         * Notice that, when computing the "idleness" of cpu, we may want to
+         * discount vc. That is, iff vc is the currently running and the only
+         * runnable vcpu on cpu, we add cpu to the idlers.
+         */
+        cpumask_and(&idlers,&cpu_online_map, CSCHED_PRIV(ops)->idlers);
+        if ( vc->processor == cpu&&  IS_RUNQ_IDLE(cpu) )
+            cpumask_set_cpu(cpu,&idlers);
+        cpumask_and(&cpus,&cpus,&idlers);
+        /* If there are idlers and cpu is still not among them, pick one */
+        if ( !cpumask_empty(&cpus)&&  !cpumask_test_cpu(cpu,&cpus) )
+            cpu = cpumask_cycle(cpu,&cpus);
+        cpumask_clear_cpu(cpu,&cpus);

-        nxt = cpumask_cycle(cpu,&cpus);
+        while ( !cpumask_empty(&cpus) )
+        {
+            cpumask_t cpu_idlers;
+            cpumask_t nxt_idlers;
+            int nxt, weight_cpu, weight_nxt;
+            int migrate_factor;

-        if ( cpumask_test_cpu(cpu, per_cpu(cpu_core_mask, nxt)) )
-        {
-            /* We're on the same socket, so check the busy-ness of threads.
-             * Migrate if # of idlers is less at all */
-            ASSERT( cpumask_test_cpu(nxt, per_cpu(cpu_core_mask, cpu)) );
-            migrate_factor = 1;
-            cpumask_and(&cpu_idlers,&idlers, per_cpu(cpu_sibling_mask, cpu));
-            cpumask_and(&nxt_idlers,&idlers, per_cpu(cpu_sibling_mask, nxt));
-        }
-        else
-        {
-            /* We're on different sockets, so check the busy-ness of cores.
-             * Migrate only if the other core is twice as idle */
-            ASSERT( !cpumask_test_cpu(nxt, per_cpu(cpu_core_mask, cpu)) );
-            migrate_factor = 2;
-            cpumask_and(&cpu_idlers,&idlers, per_cpu(cpu_core_mask, cpu));
-            cpumask_and(&nxt_idlers,&idlers, per_cpu(cpu_core_mask, nxt));
+            nxt = cpumask_cycle(cpu,&cpus);
+
+            if ( cpumask_test_cpu(cpu, per_cpu(cpu_core_mask, nxt)) )
+            {
+                /* We're on the same socket, so check the busy-ness of threads.
+                 * Migrate if # of idlers is less at all */
+                ASSERT( cpumask_test_cpu(nxt, per_cpu(cpu_core_mask, cpu)) );
+                migrate_factor = 1;
+                cpumask_and(&cpu_idlers,&idlers, per_cpu(cpu_sibling_mask,
+                            cpu));
+                cpumask_and(&nxt_idlers,&idlers, per_cpu(cpu_sibling_mask,
+                            nxt));
+            }
+            else
+            {
+                /* We're on different sockets, so check the busy-ness of cores.
+                 * Migrate only if the other core is twice as idle */
+                ASSERT( !cpumask_test_cpu(nxt, per_cpu(cpu_core_mask, cpu)) );
+                migrate_factor = 2;
+                cpumask_and(&cpu_idlers,&idlers, per_cpu(cpu_core_mask, cpu));
+                cpumask_and(&nxt_idlers,&idlers, per_cpu(cpu_core_mask, nxt));
+            }
+
+            weight_cpu = cpumask_weight(&cpu_idlers);
+            weight_nxt = cpumask_weight(&nxt_idlers);
+            /* smt_power_savings: consolidate work rather than spreading it */
+            if ( sched_smt_power_savings ?
+                 weight_cpu>  weight_nxt :
+                 weight_cpu * migrate_factor<  weight_nxt )
+            {
+                cpumask_and(&nxt_idlers,&cpus,&nxt_idlers);
+                spc = CSCHED_PCPU(nxt);
+                cpu = cpumask_cycle(spc->idle_bias,&nxt_idlers);
+                cpumask_andnot(&cpus,&cpus, per_cpu(cpu_sibling_mask, cpu));
+            }
+            else
+            {
+                cpumask_andnot(&cpus,&cpus,&nxt_idlers);
+            }
          }

-        weight_cpu = cpumask_weight(&cpu_idlers);
-        weight_nxt = cpumask_weight(&nxt_idlers);
-        /* smt_power_savings: consolidate work rather than spreading it */
-        if ( sched_smt_power_savings ?
-             weight_cpu>  weight_nxt :
-             weight_cpu * migrate_factor<  weight_nxt )
-        {
-            cpumask_and(&nxt_idlers,&cpus,&nxt_idlers);
-            spc = CSCHED_PCPU(nxt);
-            cpu = cpumask_cycle(spc->idle_bias,&nxt_idlers);
-            cpumask_andnot(&cpus,&cpus, per_cpu(cpu_sibling_mask, cpu));
-        }
-        else
-        {
-            cpumask_andnot(&cpus,&cpus,&nxt_idlers);
-        }
+        /* Stop if cpu is idle (or if csched_balance_cpumask() says we can) */
+        if ( cpumask_test_cpu(cpu,&idlers) || ret )
+            break;
      }

      if ( commit&&  spc )
@@ -913,6 +1032,13 @@ csched_alloc_domdata(const struct schedu
      if ( sdom == NULL )
          return NULL;

+    if ( !alloc_cpumask_var(&sdom->node_affinity_cpumask) )
+    {
+        xfree(sdom);
+        return NULL;
+    }
+    cpumask_setall(sdom->node_affinity_cpumask);
+
      /* Initialize credit and weight */
      INIT_LIST_HEAD(&sdom->active_vcpu);
      sdom->active_vcpu_count = 0;
@@ -944,6 +1070,9 @@ csched_dom_init(const struct scheduler *
  static void
  csched_free_domdata(const struct scheduler *ops, void *data)
  {
+    struct csched_dom *sdom = data;
+
+    free_cpumask_var(sdom->node_affinity_cpumask);
      xfree(data);
  }

@@ -1240,9 +1369,10 @@ csched_tick(void *_cpu)
  }

  static struct csched_vcpu *
-csched_runq_steal(int peer_cpu, int cpu, int pri)
+csched_runq_steal(int peer_cpu, int cpu, int pri, int balance_step)
  {
      const struct csched_pcpu * const peer_pcpu = CSCHED_PCPU(peer_cpu);
+    struct csched_private *prv = CSCHED_PRIV(per_cpu(scheduler, peer_cpu));
      const struct vcpu * const peer_vcpu = curr_on_cpu(peer_cpu);
      struct csched_vcpu *speer;
      struct list_head *iter;
@@ -1265,11 +1395,24 @@ csched_runq_steal(int peer_cpu, int cpu,
              if ( speer->pri<= pri )
                  break;

-            /* Is this VCPU is runnable on our PCPU? */
+            /* Is this VCPU runnable on our PCPU? */
              vc = speer->vcpu;
              BUG_ON( is_idle_vcpu(vc) );

-            if (__csched_vcpu_is_migrateable(vc, cpu))
+            /*
+             * Retrieve the correct mask for this balance_step or, if we're
+             * dealing with node-affinity and the vcpu has no node affinity
+             * at all, just skip this vcpu. That is needed if we want to
+             * check if we have any node-affine work to steal first (wrt
+             * any vcpu-affine work).
+             */
+            if ( csched_balance_cpumask(vc, balance_step,
+&scratch_balance_mask) )
+                continue;
+
+            if ( __csched_vcpu_is_migrateable(vc, cpu,&scratch_balance_mask)
+&&  __csched_vcpu_should_migrate(cpu,&scratch_balance_mask,
+                                                 prv->idlers) )
              {
                  /* We got a candidate. Grab it! */
                  TRACE_3D(TRC_CSCHED_STOLEN_VCPU, peer_cpu,
@@ -1295,7 +1438,8 @@ csched_load_balance(struct csched_privat
      struct csched_vcpu *speer;
      cpumask_t workers;
      cpumask_t *online;
-    int peer_cpu;
+    int peer_cpu, peer_node, bstep;
+    int node = cpu_to_node(cpu);

      BUG_ON( cpu != snext->vcpu->processor );
      online = cpupool_scheduler_cpumask(per_cpu(cpupool, cpu));
@@ -1312,42 +1456,68 @@ csched_load_balance(struct csched_privat
          SCHED_STAT_CRANK(load_balance_other);

      /*
-     * Peek at non-idling CPUs in the system, starting with our
-     * immediate neighbour.
+     * Let's look around for work to steal, taking both vcpu-affinity
+     * and node-affinity into account. More specifically, we check all
+     * the non-idle CPUs' runq, looking for:
+     *  1. any node-affine work to steal first,
+     *  2. if not finding anything, any vcpu-affine work to steal.
       */
-    cpumask_andnot(&workers, online, prv->idlers);
-    cpumask_clear_cpu(cpu,&workers);
-    peer_cpu = cpu;
+    for_each_csched_balance_step( bstep )
+    {
+        /*
+         * We peek at the non-idling CPUs in a node-wise fashion. In fact,
+         * it is more likely that we find some node-affine work on our same
+         * node, not to mention that migrating vcpus within the same node
+         * could well expected to be cheaper than across-nodes (memory
+         * stays local, there might be some node-wide cache[s], etc.).
+         */
+        peer_node = node;
+        do
+        {
+            /* Find out what the !idle are in this node */
+            cpumask_andnot(&workers, online, prv->idlers);
+            cpumask_and(&workers,&workers,&node_to_cpumask(peer_node));
+            cpumask_clear_cpu(cpu,&workers);

-    while ( !cpumask_empty(&workers) )
-    {
-        peer_cpu = cpumask_cycle(peer_cpu,&workers);
-        cpumask_clear_cpu(peer_cpu,&workers);
+            if ( cpumask_empty(&workers) )
+                goto next_node;

-        /*
-         * Get ahold of the scheduler lock for this peer CPU.
-         *
-         * Note: We don't spin on this lock but simply try it. Spinning could
-         * cause a deadlock if the peer CPU is also load balancing and trying
-         * to lock this CPU.
-         */
-        if ( !pcpu_schedule_trylock(peer_cpu) )
-        {
-            SCHED_STAT_CRANK(steal_trylock_failed);
-            continue;
-        }
+            peer_cpu = cpumask_first(&workers);
+            do
+            {
+                /*
+                 * Get ahold of the scheduler lock for this peer CPU.
+                 *
+                 * Note: We don't spin on this lock but simply try it. Spinning
+                 * could cause a deadlock if the peer CPU is also load
+                 * balancing and trying to lock this CPU.
+                 */
+                if ( !pcpu_schedule_trylock(peer_cpu) )
+                {
+                    SCHED_STAT_CRANK(steal_trylock_failed);
+                    peer_cpu = cpumask_cycle(peer_cpu,&workers);
+                    continue;
+                }

-        /*
-         * Any work over there to steal?
-         */
-        speer = cpumask_test_cpu(peer_cpu, online) ?
-            csched_runq_steal(peer_cpu, cpu, snext->pri) : NULL;
-        pcpu_schedule_unlock(peer_cpu);
-        if ( speer != NULL )
-        {
-            *stolen = 1;
-            return speer;
-        }
+                /* Any work over there to steal? */
+                speer = cpumask_test_cpu(peer_cpu, online) ?
+                    csched_runq_steal(peer_cpu, cpu, snext->pri, bstep) : NULL;
+                pcpu_schedule_unlock(peer_cpu);
+
+                /* As soon as one vcpu is found, balancing ends */
+                if ( speer != NULL )
+                {
+                    *stolen = 1;
+                    return speer;
+                }
+
+                peer_cpu = cpumask_cycle(peer_cpu,&workers);
+
+            } while( peer_cpu != cpumask_first(&workers) );
+
+ next_node:
+            peer_node = cycle_node(peer_node, node_online_map);
+        } while( peer_node != node );
      }

   out:
diff --git a/xen/include/xen/nodemask.h b/xen/include/xen/nodemask.h
--- a/xen/include/xen/nodemask.h
+++ b/xen/include/xen/nodemask.h
@@ -41,6 +41,8 @@
   * int last_node(mask)                        Number highest set bit, or 
MAX_NUMNODES
   * int first_unset_node(mask)         First node not set in mask, or
   *                                    MAX_NUMNODES.
+ * int cycle_node(node, mask)          Next node cycling from 'node', or
+ *                                     MAX_NUMNODES
   *
   * nodemask_t nodemask_of_node(node)  Return nodemask with bit 'node' set
   * NODE_MASK_ALL                      Initializer - all bits set
@@ -254,6 +256,16 @@ static inline int __first_unset_node(con
                        find_first_zero_bit(maskp->bits, MAX_NUMNODES));
  }

+#define cycle_node(n, src) __cycle_node((n),&(src), MAX_NUMNODES)
+static inline int __cycle_node(int n, const nodemask_t *maskp, int nbits)
+{
+    int nxt = __next_node(n, maskp, nbits);
+
+    if (nxt == nbits)
+        nxt = __first_node(maskp, nbits);
+    return nxt;
+}
+
  #define NODE_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(MAX_NUMNODES)

  #if MAX_NUMNODES<= BITS_PER_LONG

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel




--
Juergen Gross                 Principal Developer Operating Systems
PBG PDG ES&S SWE OS6                   Telephone: +49 (0) 89 3222 2967
Fujitsu Technology Solutions              e-mail: juergen.gross@xxxxxxxxxxxxxx
Domagkstr. 28                           Internet: ts.fujitsu.com
D-80807 Muenchen                 Company details: ts.fujitsu.com/imprint.html

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.