[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Only CPU0 active after ACPI S3, xen 4.1.3



I had similar, but (I think) different issues.

See the following thread:
http://markmail.org/search/?q=e4a31205766d518276d0fbc1780bcd63db1a502d#query:e4a31205766d518276d0fbc1780bcd63db1a502d+page:1+mid:udkd2qcvtyqj75re+state:results

I still have a patch reverting part of this changeset to get S3 working with pinning CPU affinity... the affinity doesn't get restored on resume, however.

I don't have much experience with this on Xen 4.1, as I ran into the issue when bringing up Xen-4.2, from Xen 4.0

However, I could see how this could be related, since it is in the scheduler...

On Fri, Nov 30, 2012 at 4:33 PM, Konrad Rzeszutek Wilk <konrad@xxxxxxxxxx> wrote:
On Thu, Nov 29, 2012 at 07:55:06PM +0100, Marek Marczykowski wrote:
> Hi all,
>
> After resume from ACPI S3 system has only CPU0 enabled, every vCPU from every
> domain works on CPU0 [1].  When trying to pin some vCPU to CPU1 got error:
> xl vcpu-pin testvm 1 1
> libxl: error: libxl.c:2565:libxl_set_vcpuaffinity setting vcpu affinity:
> Invalid argument
>
> What went wrong? How can I reenable CPU1-CPU3?

I think Ben had found some issues with this in the past? CC-ing him
here.
>
> System info:
> xen 4.1.3
> linux 3.4.18 with acpi-s3 patches from Konrad's git
> Processor: Intel i5-2520M
>
> dmesg from dom0 and hypervisor attached.
>
> BTW Are there any plans to upstream acpi-s3 patches?
>
> [1] xl vcpu-list:
> Name                                ID  VCPU   CPU State   Time(s) CPU Affinity
> dom0                                 0     0    0   r--    1347.8  any cpu
> dom0                                 0     1    0   -b-     594.4  any cpu
> dom0                                 0     2    0   -b-     421.1  any cpu
> dom0                                 0     3    0   -b-     432.6  any cpu
> netvm                                1     0    0   -b-     596.6  any cpu
> netvm                                1     1    0   -b-     363.7  any cpu
> firewallvm                           2     0    0   -b-     170.5  any cpu
> firewallvm                           2     1    0   -b-     122.5  any cpu
> devel17                              3     0    0   -b-     137.0  any cpu
> devel17                              3     1    0   -b-     112.9  any cpu
> devel17                              3     2    0   -b-      97.9  any cpu
> devel17                              3     3    0   -b-     116.0  any cpu
> vm2                                  4     0    0   -b-     418.6  any cpu
> vm2                                  4     1    0   -b-     390.2  any cpu
> private                              5     0    0   -b-     175.9  any cpu
> private                              5     1    0   -b-     161.6  any cpu
> mail                                 6     0    0   -b-    1587.1  any cpu
> mail                                 6     1    0   -b-    1717.5  any cpu
> testvm                               7     0    0   -b-      73.0  any cpu
> testvm                               7     1    0   -b-      68.9  any cpu
> testvm                               7     2    0   -b-      51.4  any cpu
> testvm                               7     3    0   -b-      67.1  any cpu
> disp1                                8     0    0   -b-     199.9  any cpu
>
>
> --
> Best Regards / Pozdrawiam,
> Marek Marczykowski
> Invisible Things Lab

> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 3.4.18-2.pvops.qubes.x86_64 (user@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #1 SMP Wed Nov 7 22:47:21 EST 2012
> [    0.000000] Command line: ro root=/dev/mapper/vg_dom0-lv_root rd_LUKS_UUID=luks-400336fa-c7c4-4be3-a244-c909aa16a18c rd_LVM_LV=vg_dom0/lv_root rd_LVM_LV=vg_dom0/lv_swap rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=pl2 rhgb quiet max_loop=255
> [    0.000000] Freeing  9a-100 pfn range: 102 pages freed
> [    0.000000] 1-1 mapping on 9a->100
> [    0.000000] Freeing  7eea-7f67 pfn range: 125 pages freed
> [    0.000000] 1-1 mapping on 7eea->7f67
> [    0.000000] Freeing  7f70-7f76 pfn range: 6 pages freed
> [    0.000000] 1-1 mapping on 7f70->7f76
> [    0.000000] Freeing  7f78-8000 pfn range: 136 pages freed
> [    0.000000] 1-1 mapping on 7f78->8000
> [    0.000000] Freeing  dffd-e000 pfn range: 3 pages freed
> [    0.000000] 1-1 mapping on dffd->e000
> [    0.000000] Freeing  20000-20200 pfn range: 512 pages freed
> [    0.000000] 1-1 mapping on 20000->20200
> [    0.000000] Freeing  40000-40200 pfn range: 512 pages freed
> [    0.000000] 1-1 mapping on 40000->40200
> [    0.000000] Freeing  c83b4-c840a pfn range: 86 pages freed
> [    0.000000] 1-1 mapping on c83b4->c840a
> [    0.000000] Freeing  c840e-c840f pfn range: 1 pages freed
> [    0.000000] 1-1 mapping on c840e->c840f
> [    0.000000] Freeing  c8411-c8414 pfn range: 3 pages freed
> [    0.000000] 1-1 mapping on c8411->c8414
> [    0.000000] Freeing  c841e-c8428 pfn range: 10 pages freed
> [    0.000000] 1-1 mapping on c841e->c8428
> [    0.000000] Freeing  c8432-c8436 pfn range: 4 pages freed
> [    0.000000] 1-1 mapping on c8432->c8436
> [    0.000000] Freeing  cac00-100000 pfn range: 218112 pages freed
> [    0.000000] 1-1 mapping on cac00->100000
> [    0.000000] Released 219612 pages of unused memory
> [    0.000000] Set 219612 page(s) to 1-1 mapping
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  Xen: 0000000000000000 - 000000000009a000 (usable)
> [    0.000000]  Xen: 000000000009a800 - 0000000000100000 (reserved)
> [    0.000000]  Xen: 0000000000100000 - 0000000007eea000 (usable)
> [    0.000000]  Xen: 0000000007eea000 - 0000000007f67000 (ACPI NVS)
> [    0.000000]  Xen: 0000000007f67000 - 0000000007f70000 (usable)
> [    0.000000]  Xen: 0000000007f70000 - 0000000007f76000 (ACPI NVS)
> [    0.000000]  Xen: 0000000007f76000 - 0000000007f78000 (usable)
> [    0.000000]  Xen: 0000000007f78000 - 0000000008000000 (ACPI NVS)
> [    0.000000]  Xen: 0000000008000000 - 000000000dffd000 (usable)
> [    0.000000]  Xen: 000000000dffd000 - 000000000e000000 (ACPI data)
> [    0.000000]  Xen: 000000000e000000 - 0000000020000000 (usable)
> [    0.000000]  Xen: 0000000020000000 - 0000000020200000 (reserved)
> [    0.000000]  Xen: 0000000020200000 - 0000000040000000 (usable)
> [    0.000000]  Xen: 0000000040000000 - 0000000040200000 (reserved)
> [    0.000000]  Xen: 0000000040200000 - 00000000c83b4000 (usable)
> [    0.000000]  Xen: 00000000c83b4000 - 00000000c840a000 (reserved)
> [    0.000000]  Xen: 00000000c840a000 - 00000000c840e000 (usable)
> [    0.000000]  Xen: 00000000c840e000 - 00000000c840f000 (reserved)
> [    0.000000]  Xen: 00000000c840f000 - 00000000c8411000 (usable)
> [    0.000000]  Xen: 00000000c8411000 - 00000000c8414000 (reserved)
> [    0.000000]  Xen: 00000000c8414000 - 00000000c841e000 (usable)
> [    0.000000]  Xen: 00000000c841e000 - 00000000c8428000 (reserved)
> [    0.000000]  Xen: 00000000c8428000 - 00000000c8432000 (usable)
> [    0.000000]  Xen: 00000000c8432000 - 00000000c8436000 (reserved)
> [    0.000000]  Xen: 00000000c8436000 - 00000000cac00000 (usable)
> [    0.000000]  Xen: 00000000cb800000 - 00000000cfa00000 (reserved)
> [    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
> [    0.000000]  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
> [    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
> [    0.000000]  Xen: 00000000ffc00000 - 00000000ffc20000 (reserved)
> [    0.000000]  Xen: 0000000100000000 - 000000042e000000 (usable)
> [    0.000000] NX (Execute Disable) protection: active
> [    0.000000] DMI 2.6 present.
> [    0.000000] DMI: Dell Inc. Latitude E6420/0K0DNP, BIOS A13 05/17/2012
> [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [    0.000000] No AGP bridge found
> [    0.000000] last_pfn = 0x42e000 max_arch_pfn = 0x400000000
> [    0.000000] x2apic enabled by BIOS, switching to x2apic ops
> [    0.000000] last_pfn = 0xcac00 max_arch_pfn = 0x400000000
> [    0.000000] found SMP MP-table at [ffff8800000f1ad0] f1ad0
> [    0.000000] initial memory mapped : 0 - 04ade000
> [    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
> [    0.000000] init_memory_mapping: 0000000000000000-00000000cac00000
> [    0.000000]  0000000000 - 00cac00000 page 4k
> [    0.000000] kernel direct mapping tables up to 0xcabfffff @ [mem 0x009a5000-0x00ffffff]
> [    0.000000] xen: setting RW the range fc4000 - 1000000
> [    0.000000] init_memory_mapping: 0000000100000000-000000042e000000
> [    0.000000]  0100000000 - 042e000000 page 4k
> [    0.000000] kernel direct mapping tables up to 0x42dffffff @ [mem 0xc9282000-0xcabfffff]
> [    0.000000] xen: setting RW the range cabff000 - cac00000
> [    0.000000] RAMDISK: 01e13000 - 04ade000
> [    0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL  )
> [    0.000000] ACPI: XSDT 000000000dffee18 0007C (v01 DELL    CBX3    06222004 MSFT 00010013)
> [    0.000000] ACPI: FACP 0000000007f90d98 000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
> [    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120320/tbfadt-378)
> [    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x07FEDE40/0x0000000007FEDD40, using 32 (20120320/tbfadt-502)
> [    0.000000] ACPI: DSDT 0000000007f5e018 08834 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
> [    0.000000] ACPI: FACS 0000000007fede40 00040
> [    0.000000] ACPI: APIC 000000000dffdf18 000CC (v02 DELL    CBX3    06222004 MSFT 00010013)
> [    0.000000] ACPI: TCPA 0000000007feed18 00032 (v02                 00000000      00000000)
> [    0.000000] ACPI: SSDT 0000000007f91a98 002F9 (v01 DELLTP      TPM 00003000 INTL 20090903)
> [    0.000000] ACPI: MCFG 0000000007feec98 0003C (v01 DELL   SNDYBRDG 06222004 MSFT 00000097)
> [    0.000000] ACPI: HPET 0000000007feec18 00038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
> [    0.000000] ACPI: BOOT 0000000007feeb98 00028 (v01 DELL   CBX3     06222004 AMI  00010013)
> [    0.000000] ACPI: SSDT 0000000007f75018 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20090903)
> [    0.000000] ACPI: SSDT 0000000007f74018 00996 (v01  PmRef    CpuPm 00003000 INTL 20090903)
> [    0.000000] ACPI: XMAR 0000000007f90c18 000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
> [    0.000000] ACPI: SLIC 0000000007f7ec18 00176 (v03 DELL    CBX3    06222004 MSFT 00010013)
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] Setting APIC routing to cluster x2apic.
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA      0x00000010 -> 0x00001000
> [    0.000000]   DMA32    0x00001000 -> 0x00100000
> [    0.000000]   Normal   0x00100000 -> 0x0042e000
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] Early memory PFN ranges
> [    0.000000]     0: 0x00000010 -> 0x0000009a
> [    0.000000]     0: 0x00000100 -> 0x00007eea
> [    0.000000]     0: 0x00007f67 -> 0x00007f70
> [    0.000000]     0: 0x00007f76 -> 0x00007f78
> [    0.000000]     0: 0x00008000 -> 0x0000dffd
> [    0.000000]     0: 0x0000e000 -> 0x00020000
> [    0.000000]     0: 0x00020200 -> 0x00040000
> [    0.000000]     0: 0x00040200 -> 0x000c83b4
> [    0.000000]     0: 0x000c840a -> 0x000c840e
> [    0.000000]     0: 0x000c840f -> 0x000c8411
> [    0.000000]     0: 0x000c8414 -> 0x000c841e
> [    0.000000]     0: 0x000c8428 -> 0x000c8432
> [    0.000000]     0: 0x000c8436 -> 0x000cac00
> [    0.000000]     0: 0x00100000 -> 0x0042e000
> [    0.000000] On node 0 totalpages: 4163092
> [    0.000000]   DMA zone: 56 pages used for memmap
> [    0.000000]   DMA zone: 1572 pages reserved
> [    0.000000]   DMA zone: 2350 pages, LIFO batch:0
> [    0.000000]   DMA32 zone: 14280 pages used for memmap
> [    0.000000]   DMA32 zone: 810690 pages, LIFO batch:31
> [    0.000000]   Normal zone: 45584 pages used for memmap
> [    0.000000]   Normal zone: 3288560 pages, LIFO batch:31
> [    0.000000] ACPI: PM-Timer IO Port: 0x408
> [    0.000000] ACPI: Local APIC address 0xfee00000
> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
> [    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
> [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [    0.000000] IOAPIC[0]: apic_id 2, version 253, address 0xfec00000, GSI 0-253
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [    0.000000] ACPI: IRQ0 used by override.
> [    0.000000] ACPI: IRQ2 used by override.
> [    0.000000] ACPI: IRQ9 used by override.
> [    0.000000] Using ACPI (MADT) for SMP configuration information
> [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [    0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
> [    0.000000] nr_irqs_gsi: 270
> [    0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f200000)
> [    0.000000] Booting paravirtualized kernel on Xen
> [    0.000000] Xen version: 4.1.3 (preserve-AD)
> [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8803e2800000 s82176 r8192 d24320 u131072
> [    0.000000] pcpu-alloc: s82176 r8192 d24320 u131072 alloc=1*2097152
> [    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
> [    4.119805] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4101600
> [    4.119809] Kernel command line: ro root=/dev/mapper/vg_dom0-lv_root rd_LUKS_UUID=luks-400336fa-c7c4-4be3-a244-c909aa16a18c rd_LVM_LV=vg_dom0/lv_root rd_LVM_LV=vg_dom0/lv_swap rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=pl2 rhgb quiet max_loop=255
> [    4.119915] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [    4.120928] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [    4.124018] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [    4.147064] Placing 64MB software IO TLB between ffff8803ce200000 - ffff8803d2200000
> [    4.147066] software IO TLB at phys 0x3ce200000 - 0x3d2200000
> [    4.181675] Memory: 14975940k/17530880k available (4557k kernel code, 878512k absent, 1676428k reserved, 4112k data, 552k init)
> [    4.181730] Hierarchical RCU implementation.
> [    4.181731]        RCU dyntick-idle grace-period acceleration is enabled.
> [    4.181738] NR_IRQS:33024 nr_irqs:1024 16
> [    4.181799] xen: sci override: global_irq=9 trigger=0 polarity=0
> [    4.181801] xen: registering gsi 9 triggering 0 polarity 0
> [    4.181809] xen: --> pirq=9 -> irq=9 (gsi=9)
> [    4.181829] xen: acpi sci 9
> [    4.181831] xen: --> pirq=1 -> irq=1 (gsi=1)
> [    4.181834] xen: --> pirq=2 -> irq=2 (gsi=2)
> [    4.181836] xen: --> pirq=3 -> irq=3 (gsi=3)
> [    4.181838] xen: --> pirq=4 -> irq=4 (gsi=4)
> [    4.181840] xen: --> pirq=5 -> irq=5 (gsi=5)
> [    4.181843] xen: --> pirq=6 -> irq=6 (gsi=6)
> [    4.181845] xen: --> pirq=7 -> irq=7 (gsi=7)
> [    4.181847] xen: --> pirq=8 -> irq=8 (gsi=8)
> [    4.181849] xen: --> pirq=10 -> irq=10 (gsi=10)
> [    4.181851] xen: --> pirq=11 -> irq=11 (gsi=11)
> [    4.181854] xen: --> pirq=12 -> irq=12 (gsi=12)
> [    4.181856] xen: --> pirq=13 -> irq=13 (gsi=13)
> [    4.181858] xen: --> pirq=14 -> irq=14 (gsi=14)
> [    4.181860] xen: --> pirq=15 -> irq=15 (gsi=15)
> [    4.182986] Console: colour VGA+ 80x25
> [    4.183012] console [tty0] enabled
> [    4.183026] Xen: using vcpuop timer interface
> [    4.183030] installing Xen timer for CPU 0
> [    4.183048] Detected 2494.416 MHz processor.
> [    4.183052] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.83 BogoMIPS (lpj=9977664)
> [    4.183054] pid_max: default: 32768 minimum: 301
> [    4.183090] Mount-cache hash table entries: 256
> [    4.183222] Initializing cgroup subsys cpuacct
> [    4.183224] Initializing cgroup subsys devices
> [    4.183225] Initializing cgroup subsys freezer
> [    4.183227] Initializing cgroup subsys net_cls
> [    4.183228] Initializing cgroup subsys blkio
> [    4.183280] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [    4.183281] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [    4.183284] CPU: Physical Processor ID: 0
> [    4.183285] CPU: Processor Core ID: 0
> [    4.184454] ACPI: Core revision 20120320
> [    4.194658] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
> [    4.194796] installing Xen timer for CPU 1
> [    4.194988] installing Xen timer for CPU 2
> [    4.195140] installing Xen timer for CPU 3
> [    4.195232] Brought up 4 CPUs
> [    4.195477] devtmpfs: initialized
> [    4.199046] PM: Registering ACPI NVS region [mem 0x07eea000-0x07f66fff] (512000 bytes)
> [    4.199056] PM: Registering ACPI NVS region [mem 0x07f70000-0x07f75fff] (24576 bytes)
> [    4.199058] PM: Registering ACPI NVS region [mem 0x07f78000-0x07ffffff] (557056 bytes)
> [    4.199069] Dell Latitude E6420 series board detected. Selecting PCI-method for reboots.
> [    4.199104] Grant tables using version 2 layout.
> [    4.199114] Grant table initialized
> [    4.199158] dummy:
> [    4.199205] RTC time:  1:19:35, date: 11/29/12
> [    4.199256] NET: Registered protocol family 16
> [    4.199465] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [    4.199467] ACPI: bus type pci registered
> [    4.199548] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [    4.199550] PCI: not using MMCONFIG
> [    4.199552] PCI: Using configuration type 1 for base access
> [    4.199559] dmi type 0xB1 record - unknown flag
> [    4.200155] bio: create slab <bio-0> at 0
> [    4.200279] ACPI: Added _OSI(Module Device)
> [    4.200280] ACPI: Added _OSI(Processor Device)
> [    4.200282] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    4.200283] ACPI: Added _OSI(Processor Aggregator Device)
> [    4.201815] ACPI: EC: Look up EC in DSDT
> [    4.206932] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [    4.219266] ACPI: SSDT 00000000c8412798 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
> [    4.219654] ACPI: Dynamic OEM Table Load:
> [    4.219657] ACPI: SSDT           (null) 00727 (v01  PmRef  Cpu0Cst 00003001 INTL 20090903)
> [    4.220118] ACPI: SSDT 00000000c8413a98 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
> [    4.220555] ACPI: Dynamic OEM Table Load:
> [    4.220558] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20090903)
> [    4.220754] ACPI: SSDT 00000000c8411d98 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
> [    4.221136] ACPI: Dynamic OEM Table Load:
> [    4.221138] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20090903)
> [    4.223275] ACPI: Interpreter enabled
> [    4.223278] ACPI: (supports S0 S3 S5)
> [    4.223294] ACPI: Using IOAPIC for interrupt routing
> [    4.223322] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> [    4.223846] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
> [    4.271283] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = ""> > [    4.272424] ACPI: No dock devices found.
> [    4.272428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    4.272988] \_SB_.PCI0:_OSC invalid UUID
> [    4.272989] _OSC request data:1 8 1f
> [    4.272992] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> [    4.273994] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
> [    4.273996] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
> [    4.273998] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
> [    4.274001] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff]
> [    4.274003] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
> [    4.274031] PCI host bridge to bus 0000:00
> [    4.274033] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
> [    4.274034] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
> [    4.274036] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [    4.274038] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
> [    4.274040] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
> [    4.274054] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
> [    4.274147] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
> [    4.274174] pci 0000:00:02.0: reg 10: [mem 0xe1400000-0xe17fffff 64bit]
> [    4.274189] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
> [    4.274200] pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
> [    4.274344] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
> [    4.274394] pci 0000:00:16.0: reg 10: [mem 0xe2eb0000-0xe2eb000f 64bit]
> [    4.274563] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [    4.274636] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
> [    4.274681] pci 0000:00:19.0: reg 10: [mem 0xe2e00000-0xe2e1ffff]
> [    4.274700] pci 0000:00:19.0: reg 14: [mem 0xe2e80000-0xe2e80fff]
> [    4.274719] pci 0000:00:19.0: reg 18: [io  0x4080-0x409f]
> [    4.274883] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> [    4.274939] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
> [    4.274983] pci 0000:00:1a.0: reg 10: [mem 0xe2e70000-0xe2e703ff]
> [    4.275185] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [    4.275243] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
> [    4.275278] pci 0000:00:1b.0: reg 10: [mem 0xe2e60000-0xe2e63fff 64bit]
> [    4.275456] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [    4.275509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
> [    4.275702] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [    4.275760] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
> [    4.275953] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [    4.276011] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
> [    4.276205] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [    4.276264] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
> [    4.276458] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [    4.276520] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
> [    4.276711] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [    4.276779] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
> [    4.276823] pci 0000:00:1d.0: reg 10: [mem 0xe2e50000-0xe2e503ff]
> [    4.277025] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [    4.277086] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
> [    4.277341] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
> [    4.277391] pci 0000:00:1f.2: reg 10: [io  0x40d0-0x40d7]
> [    4.277410] pci 0000:00:1f.2: reg 14: [io  0x40c0-0x40c3]
> [    4.277429] pci 0000:00:1f.2: reg 18: [io  0x40b0-0x40b7]
> [    4.277449] pci 0000:00:1f.2: reg 1c: [io  0x40a0-0x40a3]
> [    4.277468] pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
> [    4.277486] pci 0000:00:1f.2: reg 24: [mem 0xe2e40000-0xe2e407ff]
> [    4.277613] pci 0000:00:1f.2: PME# supported from D3hot
> [    4.277657] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
> [    4.277694] pci 0000:00:1f.3: reg 10: [mem 0xe2e30000-0xe2e300ff 64bit]
> [    4.277749] pci 0000:00:1f.3: reg 20: [io  0x4040-0x405f]
> [    4.277920] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
> [    4.278353] pci 0000:02:00.0: [8086:422b] type 00 class 0x028000
> [    4.278708] pci 0000:02:00.0: reg 10: [mem 0xe2d00000-0xe2d01fff 64bit]
> [    4.280508] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [    4.285361] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
> [    4.285374] pci 0000:00:1c.1:   bridge window [mem 0xe2d00000-0xe2dfffff]
> [    4.285490] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [    4.285498] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
> [    4.285505] pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
> [    4.285517] pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
> [    4.285625] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
> [    4.285632] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
> [    4.285639] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
> [    4.285651] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
> [    4.285818] pci 0000:0a:00.0: [1217:8221] type 00 class 0x080501
> [    4.285872] pci 0000:0a:00.0: reg 10: [mem 0xe2c20000-0xe2c201ff]
> [    4.286294] pci 0000:0a:00.0: supports D1 D2
> [    4.286295] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    4.286432] pci 0000:0a:00.1: [1217:8231] type 00 class 0x018000
> [    4.286486] pci 0000:0a:00.1: reg 10: [mem 0xe2c10000-0xe2c10fff]
> [    4.286563] pci 0000:0a:00.1: reg 18: [mem 0xe2c00000-0xe2c007ff]
> [    4.286908] pci 0000:0a:00.1: supports D1 D2
> [    4.286909] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
> [    4.293400] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
> [    4.293412] pci 0000:00:1c.5:   bridge window [mem 0xe2c00000-0xe2cfffff]
> [    4.293479] pci_bus 0000:00: on NUMA node 0
> [    4.293483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    4.293612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [    4.293647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> [    4.293682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> [    4.293717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
> [    4.293762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> [    4.293857] \_SB_.PCI0:_OSC invalid UUID
> [    4.293858] _OSC request data:1 1f 1f
> [    4.293861]  pci0000:00: Requesting ACPI _OSC control (0x1d)
> [    4.293906] \_SB_.PCI0:_OSC invalid UUID
> [    4.293907] _OSC request data:1 0 1d
> [    4.293910]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
> [    4.293911] ACPI _OSC control for PCIe not granted, disabling ASPM
> [    4.297639] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [    4.297702] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [    4.297761] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [    4.297820] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [    4.297878] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> [    4.297937] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> [    4.297996] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
> [    4.298054] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> [    4.298087] xen/balloon: Initialising balloon driver.
> [    4.301022] xen-balloon: Initialising balloon driver.
> [    4.301062] xen/balloon: Xen selfballooning driver disabled for domain0.
> [    4.301148] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [    4.301157] vgaarb: loaded
> [    4.301157] vgaarb: bridge control possible 0000:00:02.0
> [    4.301279] PCI: Using ACPI for IRQ routing
> [    4.305930] PCI: pci_cache_line_size set to 64 bytes
> [    4.306106] reserve RAM buffer: 000000000009a000 - 000000000009ffff
> [    4.306108] reserve RAM buffer: 0000000007eea000 - 0000000007ffffff
> [    4.306110] reserve RAM buffer: 0000000007f70000 - 0000000007ffffff
> [    4.306112] reserve RAM buffer: 0000000007f78000 - 0000000007ffffff
> [    4.306113] reserve RAM buffer: 000000000dffd000 - 000000000fffffff
> [    4.306115] reserve RAM buffer: 00000000c83b4000 - 00000000cbffffff
> [    4.306118] reserve RAM buffer: 00000000c840e000 - 00000000cbffffff
> [    4.306121] reserve RAM buffer: 00000000c8411000 - 00000000cbffffff
> [    4.306123] reserve RAM buffer: 00000000c841e000 - 00000000cbffffff
> [    4.306125] reserve RAM buffer: 00000000c8432000 - 00000000cbffffff
> [    4.306127] reserve RAM buffer: 00000000cac00000 - 00000000cbffffff
> [    4.306129] reserve RAM buffer: 000000042e000000 - 000000042fffffff
> [    4.306235] Switching to clocksource xen
> [    4.307726] pnp: PnP ACPI init
> [    4.307738] ACPI: bus type pnp registered
> [    4.308287] pnp 00:00: [bus 00-3e]
> [    4.308289] pnp 00:00: [io  0x0000-0x0cf7 window]
> [    4.308291] pnp 00:00: [io  0x0cf8-0x0cff]
> [    4.308293] pnp 00:00: [io  0x0d00-0xffff window]
> [    4.308295] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [    4.308296] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
> [    4.308298] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
> [    4.308300] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
> [    4.308301] pnp 00:00: [mem 0x000cc000-0x000cffff window]
> [    4.308303] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
> [    4.308305] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
> [    4.308307] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
> [    4.308309] pnp 00:00: [mem 0x000dc000-0x000dffff window]
> [    4.308310] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
> [    4.308312] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
> [    4.308314] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
> [    4.308315] pnp 00:00: [mem 0x000ec000-0x000effff window]
> [    4.308317] pnp 00:00: [mem 0x000f0000-0x000fffff window]
> [    4.308319] pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
> [    4.308320] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
> [    4.308385] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> [    4.308398] pnp 00:01: [io  0x0000-0x001f]
> [    4.308400] pnp 00:01: [io  0x0081-0x0091]
> [    4.308401] pnp 00:01: [io  0x0093-0x009f]
> [    4.308403] pnp 00:01: [io  0x00c0-0x00df]
> [    4.308404] pnp 00:01: [dma 4]
> [    4.308422] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [    4.308429] pnp 00:02: [mem 0xff000000-0xffffffff]
> [    4.308445] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
> [    4.308540] pnp 00:03: [mem 0xfed00000-0xfed003ff]
> [    4.308572] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
> [    4.308575] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
> [    4.308584] pnp 00:04: [io  0x00f0]
> [    4.308587] xen: registering gsi 13 triggering 1 polarity 0
> [    4.308609] pnp 00:04: [irq 13]
> [    4.308626] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> [    4.308636] pnp 00:05: [io  0x002e-0x002f]
> [    4.308637] pnp 00:05: [io  0x004e-0x004f]
> [    4.308639] pnp 00:05: [io  0x0061]
> [    4.308640] pnp 00:05: [io  0x0063]
> [    4.308641] pnp 00:05: [io  0x0065]
> [    4.308642] pnp 00:05: [io  0x0067]
> [    4.308644] pnp 00:05: [io  0x0070]
> [    4.308645] pnp 00:05: [io  0x0080]
> [    4.308646] pnp 00:05: [io  0x0092]
> [    4.308648] pnp 00:05: [io  0x00b2-0x00b3]
> [    4.308649] pnp 00:05: [io  0x0680-0x069f]
> [    4.308651] pnp 00:05: [io  0x1000-0x100f]
> [    4.308653] pnp 00:05: [io  0xffff]
> [    4.308654] pnp 00:05: [io  0xffff]
> [    4.308655] pnp 00:05: [io  0x0400-0x047f]
> [    4.308656] pnp 00:05: [io  0x0500-0x057f]
> [    4.308658] pnp 00:05: [io  0x164e-0x164f]
> [    4.308689] system 00:05: [io  0x0680-0x069f] has been reserved
> [    4.308691] system 00:05: [io  0x1000-0x100f] has been reserved
> [    4.308693] system 00:05: [io  0xffff] has been reserved
> [    4.308695] system 00:05: [io  0xffff] has been reserved
> [    4.308697] system 00:05: [io  0x0400-0x047f] has been reserved
> [    4.308700] system 00:05: [io  0x0500-0x057f] has been reserved
> [    4.308701] system 00:05: [io  0x164e-0x164f] has been reserved
> [    4.308704] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    4.308711] pnp 00:06: [io  0x0070-0x0077]
> [    4.308713] xen: registering gsi 8 triggering 1 polarity 0
> [    4.308730] pnp 00:06: [irq 8]
> [    4.308749] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    4.308758] pnp 00:07: [io  0x0060]
> [    4.308759] pnp 00:07: [io  0x0064]
> [    4.308761] xen: registering gsi 1 triggering 1 polarity 0
> [    4.308777] pnp 00:07: [irq 1]
> [    4.308794] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
> [    4.309984] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
> [    4.309993] xen: registering gsi 12 triggering 1 polarity 0
> [    4.310011] pnp 00:09: [irq 12]
> [    4.310030] pnp 00:09: Plug and Play ACPI device, IDs DLL0493 PNP0f13 (active)
> [    4.310065] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
> [    4.310086] pnp 00:0a: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
> [    4.310291] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
> [    4.310292] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
> [    4.310294] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
> [    4.310296] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
> [    4.310298] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
> [    4.310309] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
> [    4.310310] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
> [    4.310312] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
> [    4.310313] pnp 00:0b: [mem 0xff000000-0xffffffff]
> [    4.310315] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
> [    4.310317] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
> [    4.310318] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
> [    4.310359] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [    4.310361] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
> [    4.310363] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
> [    4.310365] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
> [    4.310367] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
> [    4.310369] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
> [    4.310371] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
> [    4.310373] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
> [    4.310375] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
> [    4.310377] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
> [    4.310380] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    4.310956] xen: registering gsi 23 triggering 1 polarity 0
> [    4.310967] xen: --> pirq=23 -> irq=23 (gsi=23)
> [    4.310985] pnp 00:0c: [irq 23]
> [    4.311015] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
> [    4.315528] pnp 00:0d: [mem 0x20000000-0x201fffff]
> [    4.315531] pnp 00:0d: [mem 0x40000000-0x401fffff]
> [    4.339851] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
> [    4.339854] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
> [    4.339857] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
> [    4.339865] pnp: PnP ACPI: found 14 devices
> [    4.339867] ACPI: ACPI bus type pnp unregistered
> [    4.346178] PM-Timer failed consistency check  (0x0xffffff) - aborting.
> [    4.346274] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
> [    4.346306] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
> [    4.346315] pci 0000:00:1c.1:   bridge window [mem 0xe2d00000-0xe2dfffff]
> [    4.346332] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [    4.346336] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
> [    4.346347] pci 0000:00:1c.2:   bridge window [mem 0xe2200000-0xe2bfffff]
> [    4.346354] pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe13fffff 64bit pref]
> [    4.346366] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
> [    4.346370] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
> [    4.346379] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe21fffff]
> [    4.346386] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
> [    4.346399] pci 0000:00:1c.5: PCI bridge to [bus 0a-0a]
> [    4.346408] pci 0000:00:1c.5:   bridge window [mem 0xe2c00000-0xe2cfffff]
> [    4.346434] xen: registering gsi 16 triggering 0 polarity 1
> [    4.346442] xen: --> pirq=16 -> irq=16 (gsi=16)
> [    4.346469] xen: registering gsi 17 triggering 0 polarity 1
> [    4.346473] xen: --> pirq=17 -> irq=17 (gsi=17)
> [    4.346498] xen: registering gsi 18 triggering 0 polarity 1
> [    4.346502] xen: --> pirq=18 -> irq=18 (gsi=18)
> [    4.346527] xen: registering gsi 19 triggering 0 polarity 1
> [    4.346531] xen: --> pirq=19 -> irq=19 (gsi=19)
> [    4.346556] xen: registering gsi 17 triggering 0 polarity 1
> [    4.346558] Already setup the GSI :17
> [    4.346563] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
> [    4.346565] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
> [    4.346566] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [    4.346568] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
> [    4.346570] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
> [    4.346572] pci_bus 0000:02: resource 1 [mem 0xe2d00000-0xe2dfffff]
> [    4.346574] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
> [    4.346575] pci_bus 0000:03: resource 1 [mem 0xe2200000-0xe2bfffff]
> [    4.346577] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe13fffff 64bit pref]
> [    4.346579] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
> [    4.346581] pci_bus 0000:09: resource 1 [mem 0xe1800000-0xe21fffff]
> [    4.346582] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
> [    4.346584] pci_bus 0000:0a: resource 1 [mem 0xe2c00000-0xe2cfffff]
> [    4.346672] NET: Registered protocol family 2
> [    4.346732] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [    4.347207] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> [    4.347753] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [    4.347872] TCP: Hash tables configured (established 262144 bind 65536)
> [    4.347874] TCP: reno registered
> [    4.347877] UDP hash table entries: 8192 (order: 6, 262144 bytes)
> [    4.347921] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
> [    4.348067] NET: Registered protocol family 1
> [    4.348085] pci 0000:00:02.0: Boot video device
> [    4.348108] xen: registering gsi 16 triggering 0 polarity 1
> [    4.348112] Already setup the GSI :16
> [    4.348203] xen: registering gsi 17 triggering 0 polarity 1
> [    4.348205] Already setup the GSI :17
> [    4.348298] PCI: CLS 64 bytes, default 64
> [    4.348333] Unpacking initramfs...
> [    4.384265] Freeing initrd memory: 45868k freed
> [    4.392440] Simple Boot Flag at 0xf3 set to 0x1
> [    4.392900] audit: initializing netlink socket (disabled)
> [    4.392911] type=2000 audit(1354151975.383:1): initialized
> [    4.411688] VFS: Disk quotas dquot_6.5.2
> [    4.411715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    4.411870] msgmni has been set to 29339
> [    4.412010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [    4.412013] io scheduler noop registered
> [    4.412015] io scheduler deadline registered
> [    4.412036] io scheduler cfq registered (default)
> [    4.412666] intel_idle: does not run on family 6 model 42
> [    4.412741] ACPI: Requesting acpi_cpufreq
> [    4.459643] Non-volatile memory driver v1.3
> [    4.459654] ramoops: platform device not found, using module parameters
> [    4.459670] ramoops: The memory size and the record size must be non-zero
> [    4.459703] ramoops: probe of ramoops failed with error -22
> [    4.474892] loop: module loaded
> [    4.474922] Fixed MDIO Bus: probed
> [    4.474965] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [    4.475166] i8042: Warning: Keylock active
> [    4.476434] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    4.476439] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    4.476551] mousedev: PS/2 mouse device common for all mice
> [    4.476707] rtc_cmos 00:06: RTC can wake from S4
> [    4.476940] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [    4.476998] rtc0: alarms up to one year, y3k, 242 bytes nvram
> [    4.477084] device-mapper: uevent: version 1.0.3
> [    4.477193] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
> [    4.477281] TCP: cubic registered
> [    4.477381] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
> [    4.477402] NET: Registered protocol family 10
> [    4.477644] Registering the dns_resolver key type
> [    4.477791] registered taskstats version 1
> [    4.478330]   Magic number: 4:584:307
> [    4.478403] tty tty36: hash matches
> [    4.478496] rtc_cmos 00:06: setting system clock to 2012-11-29 01:19:35 UTC (1354151975)
> [    4.478801] Freeing unused kernel memory: 552k freed
> [    4.478847] Write protecting the kernel read-only data: 8192k
> [    4.481908] Freeing unused kernel memory: 1568k freed
> [    4.482112] Freeing unused kernel memory: 24k freed
> [    4.524129] dracut: dracut-005-3.fc13
> [    4.552311] pciback 0000:00:19.0: seizing device
> [    4.552403] pciback 0000:02:00.0: seizing device
> [    4.552941] xen: registering gsi 17 triggering 0 polarity 1
> [    4.552952] Already setup the GSI :17
> [    4.553934] xen: registering gsi 20 triggering 0 polarity 1
> [    4.553964] xen: --> pirq=20 -> irq=20 (gsi=20)
> [    4.554574] xen-pciback: backend is vpci
> [    4.617471] udev: starting version 151
> [    4.617770] udevd (80): /proc/80/oom_adj is deprecated, please use /proc/80/oom_score_adj instead.
> [    4.654916] Linux agpgart interface v0.103
> [    4.655397] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
> [    5.051184] ACPI: Lid Switch [LID]
> [    5.051436] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> [    5.051547] ACPI: Power Button [PBTN]
> [    5.051682] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
> [    5.051760] ACPI: Sleep Button [SBTN]
> [    5.054141] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
> [    5.054421] ACPI: Power Button [PWRF]
> [    5.056887] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
> [    5.058118] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
> [    5.064439] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
> [    5.064916] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> [    5.070296] [drm] Initialized drm 1.1.0 20060810
> [    5.080002] xen: registering gsi 16 triggering 0 polarity 1
> [    5.080015] Already setup the GSI :16
> [    5.080364] i915 0000:00:02.0: setting latency timer to 64
> [    5.190295] [drm] MTRR allocation failed.  Graphics performance may suffer.
> [    5.190491] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [    5.190493] [drm] Driver supports precise vblank timestamp query.
> [    5.190554] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [    5.548301] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [    5.591093] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
> [    5.606212] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
> [    5.806814] fbcon: inteldrmfb (fb0) is primary device
> [    6.095967] Console: switching to colour frame buffer device 200x56
> [    6.101477] fb0: inteldrmfb frame buffer device
> [    6.101478] drm: registered panic notifier
> [    6.130833] acpi device:38: registered as cooling_device4
> [    6.133713] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
> [    6.133915] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
> [    6.135082] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [    6.185946] dracut: Starting plymouth daemon
> [    6.479391] dracut: rd_NO_DM: removing DM RAID activation
> [    6.489309] dracut: rd_NO_MD: removing MD RAID activation
> [    6.542596] wmi: Mapper loaded
> [    6.564439] usbcore: registered new interface driver usbfs
> [    6.564463] usbcore: registered new interface driver hub
> [    6.568901] SCSI subsystem initialized
> [    6.569574] usbcore: registered new device driver usb
> [    6.570692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    6.570723] xen: registering gsi 16 triggering 0 polarity 1
> [    6.570728] Already setup the GSI :16
> [    6.570776] ehci_hcd 0000:00:1a.0: setting latency timer to 64
> [    6.570782] ehci_hcd 0000:00:1a.0: EHCI Host Controller
> [    6.570814] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
> [    6.570879] ehci_hcd 0000:00:1a.0: debug port 2
> [    6.573720] libata version 3.00 loaded.
> [    6.574777] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
> [    6.574832] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe2e70000
> [    6.586344] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [    6.586369] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [    6.586372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    6.586375] usb usb1: Product: EHCI Host Controller
> [    6.586376] usb usb1: Manufacturer: Linux 3.4.18-2.pvops.qubes.x86_64 ehci_hcd
> [    6.586378] usb usb1: SerialNumber: 0000:00:1a.0
> [    6.586506] hub 1-0:1.0: USB hub found
> [    6.586511] hub 1-0:1.0: 2 ports detected
> [    6.586604] xen: registering gsi 17 triggering 0 polarity 1
> [    6.586609] Already setup the GSI :17
> [    6.586663] ehci_hcd 0000:00:1d.0: setting latency timer to 64
> [    6.586668] ehci_hcd 0000:00:1d.0: EHCI Host Controller
> [    6.586678] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [    6.586734] ehci_hcd 0000:00:1d.0: debug port 2
> [    6.590650] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
> [    6.590709] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe2e50000
> [    6.606335] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [    6.606364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [    6.606367] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    6.606370] usb usb2: Product: EHCI Host Controller
> [    6.606371] usb usb2: Manufacturer: Linux 3.4.18-2.pvops.qubes.x86_64 ehci_hcd
> [    6.606373] usb usb2: SerialNumber: 0000:00:1d.0
> [    6.606519] hub 2-0:1.0: USB hub found
> [    6.606524] hub 2-0:1.0: 2 ports detected
> [    6.606620] ahci 0000:00:1f.2: version 3.0
> [    6.606641] xen: registering gsi 18 triggering 0 polarity 1
> [    6.606647] Already setup the GSI :18
> [    6.606896] ahci: SSS flag set, parallel bus scan disabled
> [    6.626400] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
> [    6.626405] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
> [    6.626414] ahci 0000:00:1f.2: setting latency timer to 64
> [    6.673732] scsi0 : ahci
> [    6.683363] scsi1 : ahci
> [    6.697268] scsi2 : ahci
> [    6.711526] scsi3 : ahci
> [    6.733931] scsi4 : ahci
> [    6.739603] scsi5 : ahci
> [    6.842106] ata1: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40100 irq 293
> [    6.842118] ata2: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40180 irq 293
> [    6.842124] ata3: DUMMY
> [    6.842129] ata4: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40280 irq 293
> [    6.842136] ata5: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40300 irq 293
> [    6.842143] ata6: SATA max UDMA/133 abar m2048@0xe2e40000 port 0xe2e40380 irq 293
> [    6.898480] usb 1-1: new high-speed USB device number 2 using ehci_hcd
> [    7.031312] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
> [    7.031323] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    7.032072] hub 1-1:1.0: USB hub found
> [    7.032344] hub 1-1:1.0: 6 ports detected
> [    7.142515] usb 2-1: new high-speed USB device number 2 using ehci_hcd
> [    7.162484] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [    7.268594] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [    7.268770] ata1.00: ATA-9: KINGSTON SV200S3256G, E111008a, max UDMA/100
> [    7.268778] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [    7.272554] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [    7.272758] ata1.00: configured for UDMA/100
> [    7.273314] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV200S3 E111 PQ: 0 ANSI: 5
> [    7.274861] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
> [    7.274870] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    7.275358] hub 2-1:1.0: USB hub found
> [    7.275521] hub 2-1:1.0: 8 ports detected
> [    7.346717] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
> [    7.443529] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187
> [    7.443539] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    7.443546] usb 1-1.4: Product: DW375 Bluetooth Module
> [    7.443550] usb 1-1.4: Manufacturer: Dell Computer Corp
> [    7.443555] usb 1-1.4: SerialNumber: D0DF9A40FE60
> [    7.514736] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
> [    7.590440] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [    7.593835] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU60N, A103, max UDMA/133
> [    7.604147] ata2.00: configured for UDMA/133
> [    7.614746] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=181c
> [    7.614757] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    7.614763] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
> [    7.614768] usb 1-1.5: Manufacturer: CN0CJ3P27248717F040SA01
> [    7.618662] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GU60N    A103 PQ: 0 ANSI: 5
> [    7.686581] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
> [    7.795399] usb 2-1.6: New USB device found, idVendor=413c, idProduct=818d
> [    7.795410] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    7.795416] usb 2-1.6: Product: DW5550
> [    7.795420] usb 2-1.6: Manufacturer: Dell
> [    7.795425] usb 2-1.6: SerialNumber: 88FA653FDF944970
> [    7.902770] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
> [    7.938478] ata4: SATA link down (SStatus 0 SControl 300)
> [    8.017319] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
> [    8.017330] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    8.017336] usb 2-1.8: Product: 5880
> [    8.017340] usb 2-1.8: Manufacturer: Broadcom Corp
> [    8.017344] usb 2-1.8: SerialNumber: 0123456789ABCD
> [    8.017794] usb 2-1.8: config 0 descriptor??
> [    8.258411] ata5: SATA link down (SStatus 0 SControl 300)
> [    8.578480] ata6: SATA link down (SStatus 0 SControl 300)
> [    8.588630] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> [    8.588846] sd 0:0:0:0: [sda] Write Protect is off
> [    8.588861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    8.588967] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    8.590122]  sda: sda1 sda2
> [    8.591059] sd 0:0:0:0: [sda] Attached SCSI disk
> [    8.609438] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
> [    8.609451] cdrom: Uniform CD-ROM driver Revision: 3.20
> [    8.609737] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [    8.714515] dracut: luksOpen /dev/sda2 luks-400336fa-c7c4-4be3-a244-c909aa16a18c
> [   13.862564] dracut: Scanning devices dm-0  for LVM logical volumes vg_dom0/lv_root vg_dom0/lv_swap
> [   13.907639] dracut: inactive '/dev/vg_dom0/lv_root' [221.62 GiB] inherit
> [   13.907708] dracut: inactive '/dev/vg_dom0/lv_swap' [16.34 GiB] inherit
> [   14.162684] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
> [   14.162693] EXT4-fs (dm-1): write access will be enabled during recovery
> [   14.775779] EXT4-fs (dm-1): orphan cleanup on readonly fs
> [   14.775800] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767209
> [   14.775909] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767207
> [   14.776007] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767205
> [   14.776035] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767206
> [   14.776062] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767204
> [   14.776088] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767202
> [   14.776117] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767198
> [   14.776146] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767196
> [   14.776172] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767191
> [   14.776198] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767189
> [   14.776227] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767188
> [   14.776274] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767187
> [   14.777018] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767186
> [   14.777060] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767184
> [   14.777089] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767183
> [   14.777117] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767171
> [   14.777146] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 5767170
> [   14.777172] EXT4-fs (dm-1): 17 orphan inodes deleted
> [   14.777177] EXT4-fs (dm-1): recovery complete
> [   14.797124] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
> [   14.806762] dracut: Mounted root filesystem /dev/mapper/vg_dom0-lv_root
> [   14.957211] dracut: Switching root
> [   15.599261] udev: starting version 151
> [   15.673674] iTCO_vendor_support: vendor-support=0
> [   15.676374] mei: module is from the staging directory, the quality is unknown, you have been warned.
> [   15.676488] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
> [   15.676679] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
> [   15.676711] xen: registering gsi 16 triggering 0 polarity 1
> [   15.676716] Already setup the GSI :16
> [   15.676725] mei 0000:00:16.0: setting latency timer to 64
> [   15.676754] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [   15.712582] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [   15.712620] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [   15.730448] input: PC Speaker as /devices/platform/pcspkr/input/input8
> [   15.734494] xen: registering gsi 18 triggering 0 polarity 1
> [   15.734500] Already setup the GSI :18
> [   15.734506] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
> [   15.734512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> [   15.737002] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
> [   15.741412] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
> [   15.741418] watchdog: error registering /dev/watchdog (err=-16)
> [   15.741422] mei 0000:00:16.0: unable to register watchdog device.
> [   15.790637] thermal LNXTHERM:00: registered as thermal_zone0
> [   15.790641] ACPI: Thermal Zone [THM] (25 C)
> [   15.814551] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [   15.814559] ACPI: Battery Slot [BAT0] (battery present)
> [   15.815037] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [   15.815521] ACPI: AC Adapter [AC] (on-line)
> [   15.867835] usbcore: registered new interface driver usbback
> [   15.975826] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [   15.975836] ACPI: Battery Slot [BAT1] (battery absent)
> [   16.102871] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
> [   16.102882] ACPI: Battery Slot [BAT2] (battery absent)
> [   16.106793] sdhci: Secure Digital Host Controller Interface driver
> [   16.106797] sdhci: Copyright(c) Pierre Ossman
> [   16.107131] parport_pc 00:08: [io  0x0378-0x037b]
> [   16.107296] parport_pc 00:08: [irq 5]
> [   16.107709] sdhci-pci 0000:0a:00.0: SDHCI controller found [1217:8221] (rev 5)
> [   16.159148] xen: registering gsi 17 triggering 0 polarity 1
> [   16.159156] Already setup the GSI :17
> [   16.159241] sdhci-pci 0000:0a:00.0: Invalid iomem size. You may experience problems.
> [   16.159319] 0000:0a:00.0 supply vmmc not found, using dummy regulator
> [   16.159384] Registered led device: mmc0::
> [   16.160442] mmc0: SDHCI controller on PCI [0000:0a:00.0] using DMA
> [   16.160928] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [   16.171737] Linux video capture interface: v2.00
> [   16.192158] cdc_wdm 2-1.6:1.5: cdc-wdm0: USB WDM device
> [   16.192211] cdc_wdm 2-1.6:1.8: cdc-wdm1: USB WDM device
> [   16.192234] usbcore: registered new interface driver cdc_wdm
> [   16.195744] cdc_acm 2-1.6:1.1: ttyACM0: USB ACM device
> [   16.198739] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [   16.220532] cdc_acm 2-1.6:1.3: ttyACM1: USB ACM device
> [   16.223728] cdc_acm 2-1.6:1.9: ttyACM2: USB ACM device
> [   16.235089] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [   16.235234] usbcore: registered new interface driver cdc_acm
> [   16.235236] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
> [   16.240235] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:181c)
> [   16.269474] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9
> [   16.269579] usbcore: registered new interface driver uvcvideo
> [   16.269581] USB Video Class driver (1.1.1)
> [   16.277415] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [   16.296646] usb 2-1.6: MAC-Address: 02:80:37:ec:02:00
> [   16.296810] cdc_ncm 2-1.6:1.6: usb0: register 'cdc_ncm' at usb-0000:00:1d.0-1.6, CDC NCM, 02:80:37:ec:02:00
> [   16.296847] usbcore: registered new interface driver cdc_ncm
> [   16.310604] parport_pc 00:08: activated
> [   16.310611] parport_pc 00:08: reported by Plug and Play ACPI
> [   16.310781] parport_pc 00:08: disabled
> [   16.311583] tpm_tis 00:0a: 1.2 TPM (device-id 0x2001, rev-id 32)
> [   16.399296] Bluetooth: Core ver 2.16
> [   16.399312] NET: Registered protocol family 31
> [   16.399314] Bluetooth: HCI device and connection manager initialized
> [   16.399317] Bluetooth: HCI socket layer initialized
> [   16.399318] Bluetooth: L2CAP socket layer initialized
> [   16.399325] Bluetooth: SCO socket layer initialized
> [   16.450583] xen: registering gsi 22 triggering 0 polarity 1
> [   16.450600] xen: --> pirq=22 -> irq=22 (gsi=22)
> [   16.567577] usbcore: registered new interface driver btusb
> [   16.739259] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> [   16.819125] input: Dell WMI hotkeys as /devices/virtual/input/input10
> [   16.925000] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
> [   16.929246] ppdev: user-space parallel port driver
> [   16.954783] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
> [   16.975176] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
> [   17.004696] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
> [   17.067123] ALSA hda_codec.c:5101 autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
> [   17.067127] ALSA hda_codec.c:5105    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
> [   17.067129] ALSA hda_codec.c:5109    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> [   17.067131] ALSA hda_codec.c:5110    mono: mono_out=0x0
> [   17.067133] ALSA hda_codec.c:5114    inputs:
> [   17.067135] ALSA hda_codec.c:5118  Mic=0xa
> [   17.067137] ALSA hda_codec.c:5118  Dock Mic=0xf
> [   17.067139] ALSA hda_codec.c:5120
> [   17.067637] ALSA patch_sigmatel.c:3117 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
> [   17.081104] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [   17.081194] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [   17.081250] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [   17.081342] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
> [   17.081432] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
> [   17.081522] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
> [   17.081610] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
> [   17.265462] Event-channel device installed.
> [   17.661764] EXT4-fs (dm-1): re-mounted. Opts: (null)
> [   17.802446] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> [   19.361631] Adding 17137660k swap on /dev/mapper/vg_dom0-lv_swap.  Priority:-1 extents:1 across:17137660k SS
> [   22.602549] ehci_hcd 0000:00:1a.0: remove, state 1
> [   22.602568] usb usb1: USB disconnect, device number 1
> [   22.602573] usb 1-1: USB disconnect, device number 2
> [   22.602578] usb 1-1.4: USB disconnect, device number 3
> [   22.605235] usb 1-1.5: USB disconnect, device number 4
> [   22.636910] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
> [   22.637183] pciback 0000:00:1a.0: seizing device
> [   22.637235] xen: registering gsi 16 triggering 0 polarity 1
> [   22.637241] Already setup the GSI :16
> [   22.662363] ehci_hcd 0000:00:1d.0: remove, state 1
> [   22.662371] usb usb2: USB disconnect, device number 1
> [   22.662373] usb 2-1: USB disconnect, device number 2
> [   22.662376] usb 2-1.6: USB disconnect, device number 3
> [   22.668531] cdc_ncm 2-1.6:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.6, CDC NCM
> [   22.694795] usb 2-1.8: USB disconnect, device number 4
> [   22.699298] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
> [   22.699577] pciback 0000:00:1d.0: seizing device
> [   22.699632] xen: registering gsi 17 triggering 0 polarity 1
> [   22.699637] Already setup the GSI :17
> [   23.684708] xen-pciback: vpci: 0000:00:19.0: assign to virtual slot 0
> [   23.685240] xen-pciback: vpci: 0000:00:1a.0: assign to virtual slot 1
> [   23.685722] xen-pciback: vpci: 0000:00:1d.0: assign to virtual slot 2
> [   23.686764] xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 3
> [   23.909636] pciback 0000:00:19.0: Driver tried to write to a read-only configuration space field at offset 0xd2, size 2. This may be harmless, but if you have problems with your device:
> [   23.909638] 1) see permissive attribute in sysfs
> [   23.909638] 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci.
> [   23.917523] pciback 0000:02:00.0: Driver tried to write to a read-only configuration space field at offset 0xd2, size 2. This may be harmless, but if you have problems with your device:
> [   23.917526] 1) see permissive attribute in sysfs
> [   23.917526] 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci.
> [   24.123663] xen-blkback:ring-ref 9, event-channel 14, protocol 1 (x86_64-abi)
> [   24.140460] xen-blkback:ring-ref 10, event-channel 15, protocol 1 (x86_64-abi)
> [   24.151420] xen-blkback:ring-ref 11, event-channel 16, protocol 1 (x86_64-abi)
> [   24.158428] xen-blkback:ring-ref 12, event-channel 17, protocol 1 (x86_64-abi)
> [   28.697615] pciback 0000:00:1a.0: enabling device (0000 -> 0002)
> [   28.697628] xen: registering gsi 16 triggering 0 polarity 1
> [   28.697634] Already setup the GSI :16
> [   28.697805] pciback 0000:00:1a.0: setting latency timer to 64
> [   28.713578] pciback 0000:00:19.0: enabling device (0000 -> 0003)
> [   28.713591] xen: registering gsi 20 triggering 0 polarity 1
> [   28.713598] Already setup the GSI :20
> [   28.713858] pciback 0000:00:19.0: setting latency timer to 64
> [   29.021371] pciback 0000:00:1d.0: enabling device (0000 -> 0002)
> [   29.021389] xen: registering gsi 17 triggering 0 polarity 1
> [   29.021400] Already setup the GSI :17
> [   29.021805] pciback 0000:00:1d.0: setting latency timer to 64
> [   29.150053] pciback 0000:02:00.0: enabling device (0000 -> 0002)
> [   29.150122] xen: registering gsi 17 triggering 0 polarity 1
> [   29.150150] Already setup the GSI :17
> [   33.635416] xen-blkback:ring-ref 9, event-channel 14, protocol 1 (x86_64-abi)
> [   33.643330] xen-blkback:ring-ref 10, event-channel 15, protocol 1 (x86_64-abi)
> [   33.651561] xen-blkback:ring-ref 11, event-channel 16, protocol 1 (x86_64-abi)
> [   33.672105] xen-blkback:ring-ref 12, event-channel 17, protocol 1 (x86_64-abi)
> [  104.230911] xen-blkback:ring-ref 9, event-channel 24, protocol 1 (x86_64-abi)
> [  104.252421] xen-blkback:ring-ref 10, event-channel 25, protocol 1 (x86_64-abi)
> [  104.253177] xen-blkback:ring-ref 11, event-channel 26, protocol 1 (x86_64-abi)
> [  104.254220] xen-blkback:ring-ref 12, event-channel 27, protocol 1 (x86_64-abi)
> [  105.086732] xen-blkback:ring-ref 9, event-channel 14, protocol 1 (x86_64-abi)
> [  105.105505] xen-blkback:ring-ref 10, event-channel 15, protocol 1 (x86_64-abi)
> [  105.115951] xen-blkback:ring-ref 11, event-channel 16, protocol 1 (x86_64-abi)
> [  105.127384] xen-blkback:ring-ref 12, event-channel 17, protocol 1 (x86_64-abi)
> [  105.929760] xen-blkback:ring-ref 9, event-channel 14, protocol 1 (x86_64-abi)
> [  105.934841] xen-blkback:ring-ref 10, event-channel 15, protocol 1 (x86_64-abi)
> [  105.973920] xen-blkback:ring-ref 11, event-channel 16, protocol 1 (x86_64-abi)
> [  105.975320] xen-blkback:ring-ref 12, event-channel 17, protocol 1 (x86_64-abi)
> [  107.191781] xen-blkback:ring-ref 9, event-channel 14, protocol 1 (x86_64-abi)
> [  107.203711] xen-blkback:ring-ref 10, event-channel 15, protocol 1 (x86_64-abi)
> [  107.208481] xen-blkback:ring-ref 11, event-channel 16, protocol 1 (x86_64-abi)
> [  107.212081] xen-blkback:ring-ref 12, event-channel 17, protocol 1 (x86_64-abi)
> [  733.434608] PM: Syncing filesystems ... done.
> [  733.436228] PM: Preparing system for mem sleep
> [  733.514803] Freezing user space processes ... (elapsed 0.01 seconds) done.
> [  733.530594] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
> [  733.546589] PM: Entering mem sleep
> [  733.546741] Suspending console(s) (use no_console_suspend to debug)
> [  733.547431] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [  733.558336] sd 0:0:0:0: [sda] Stopping disk
> [  734.194656] PM: suspend of devices complete after 647.504 msecs
> [  734.195026] PM: late suspend of devices complete after 0.359 msecs
> [  734.210655] PM: noirq suspend of devices complete after 15.614 msecs
> [  734.211326] ACPI: Preparing to enter system sleep state S3
> [  734.235008] PM: Saving platform NVS memory
> [  734.328066] Disabling non-boot CPUs ...
> [  735.945491] ACPI: Low-level resume complete
> [  735.945579] PM: Restoring platform NVS memory
> [  736.000094] Enabling non-boot CPUs ...
> [  736.000256] installing Xen timer for CPU 1
> [  736.004594] CPU1 is up
> [  736.004819] installing Xen timer for CPU 2
> [  736.067516] CPU2 is up
> [  736.067770] installing Xen timer for CPU 3
> [  736.101535] CPU3 is up
> [  736.102470] ACPI: Waking up from system sleep state S3
> [  736.555932] PM: noirq resume of devices complete after 7.970 msecs
> [  736.556506] PM: early resume of devices complete after 0.387 msecs
> [  736.660336] i915 0000:00:02.0: setting latency timer to 64
> [  736.660404] pciback 0000:00:19.0: setting latency timer to 64
> [  736.660453] xen: registering gsi 16 triggering 0 polarity 1
> [  736.660460] Already setup the GSI :16
> [  736.660490] pciback 0000:00:1a.0: setting latency timer to 64
> [  736.660605] xen: registering gsi 17 triggering 0 polarity 1
> [  736.660610] Already setup the GSI :17
> [  736.660641] pciback 0000:00:1d.0: setting latency timer to 64
> [  736.660696] xen: registering gsi 22 triggering 0 polarity 1
> [  736.660701] Already setup the GSI :22
> [  736.661221] ahci 0000:00:1f.2: setting latency timer to 64
> [  736.689606] xen: registering gsi 18 triggering 0 polarity 1
> [  736.689608] Already setup the GSI :18
> [  736.689704] xen: registering gsi 17 triggering 0 polarity 1
> [  736.689706] Already setup the GSI :17
> [  736.711623] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [  736.802676] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16)
> [  736.802678] watchdog: error registering /dev/watchdog (err=-16)
> [  736.802680] mei 0000:00:16.0: unable to register watchdog device.
> [  737.060106] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [  737.060330] ata4: SATA link down (SStatus 0 SControl 300)
> [  737.060372] ata5: SATA link down (SStatus 0 SControl 300)
> [  737.074123] ata2.00: configured for UDMA/133
> [  737.117629] ata6: SATA link down (SStatus 0 SControl 300)
> [  738.619036] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [  738.743565] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [  738.901088] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> [  738.903441] ata1.00: configured for UDMA/100
> [  738.903843] sd 0:0:0:0: [sda] Starting disk
> [  738.905367] PM: resume of devices complete after 2348.851 msecs
> [  738.905922] PM: Finishing wakeup.
> [  738.905926] Restarting tasks ... done.
> [  738.911334] video LNXVIDEO:00: Restoring backlight state
> [  739.836250] dell_wmi: Received unknown WMI event (0x0)
> [  740.184759] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [  740.239730] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [  740.327711] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [  740.373931] sdhci-pci 0000:0a:00.0: could not set regulator OCR (-22)
> [  742.542022] hrtimer: interrupt took 102980031 ns
> [  757.609031] [sched_delayed] sched: RT throttling activated
> [  760.164427] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

> (XEN) Xen version 4.1.3 (user@xxxxxxxxxxxx) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) Mon Nov 26 15:25:32 EST 2012
> (XEN) Latest ChangeSet: unavailable
> (XEN) Bootloader: GNU GRUB 0.97
> (XEN) Command line: console=none cpufreq=verbose=1
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009a800 (usable)
> (XEN)  000000000009a800 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 0000000007eea000 (usable)
> (XEN)  0000000007eea000 - 0000000007f67000 (ACPI NVS)
> (XEN)  0000000007f67000 - 0000000007f70000 (usable)
> (XEN)  0000000007f70000 - 0000000007f76000 (ACPI NVS)
> (XEN)  0000000007f76000 - 0000000007f78000 (usable)
> (XEN)  0000000007f78000 - 0000000008000000 (ACPI NVS)
> (XEN)  0000000008000000 - 000000000dffd000 (usable)
> (XEN)  000000000dffd000 - 000000000e000000 (ACPI data)
> (XEN)  000000000e000000 - 0000000020000000 (usable)
> (XEN)  0000000020000000 - 0000000020200000 (reserved)
> (XEN)  0000000020200000 - 0000000040000000 (usable)
> (XEN)  0000000040000000 - 0000000040200000 (reserved)
> (XEN)  0000000040200000 - 00000000c83b4000 (usable)
> (XEN)  00000000c83b4000 - 00000000c840a000 (reserved)
> (XEN)  00000000c840a000 - 00000000c840e000 (usable)
> (XEN)  00000000c840e000 - 00000000c840f000 (reserved)
> (XEN)  00000000c840f000 - 00000000c8411000 (usable)
> (XEN)  00000000c8411000 - 00000000c8414000 (reserved)
> (XEN)  00000000c8414000 - 00000000c841e000 (usable)
> (XEN)  00000000c841e000 - 00000000c8428000 (reserved)
> (XEN)  00000000c8428000 - 00000000c8432000 (usable)
> (XEN)  00000000c8432000 - 00000000c8436000 (reserved)
> (XEN)  00000000c8436000 - 00000000cac00000 (usable)
> (XEN)  00000000cb800000 - 00000000cfa00000 (reserved)
> (XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
> (XEN)  00000000ffc00000 - 00000000ffc20000 (reserved)
> (XEN)  0000000100000000 - 000000042e000000 (usable)
> (XEN) ACPI: RSDP 000FE300, 0024 (r2 DELL  )
> (XEN) ACPI: XSDT 0DFFEE18, 007C (r1 DELL    CBX3     6222004 MSFT    10013)
> (XEN) ACPI: FACP 07F90D98, 00F4 (r4 DELL    CBX3     6222004 MSFT    10013)
> (XEN) ACPI: DSDT 07F5E018, 8834 (r2 INT430 SYSFexxx     1001 INTL 20090903)
> (XEN) ACPI: FACS 07FEDD40, 0040
> (XEN) ACPI: APIC 0DFFDF18, 00CC (r2 DELL    CBX3     6222004 MSFT    10013)
> (XEN) ACPI: TCPA 07FEED18, 0032 (r2                        0             0)
> (XEN) ACPI: SSDT 07F91A98, 02F9 (r1 DELLTP      TPM     3000 INTL 20090903)
> (XEN) ACPI: MCFG 07FEEC98, 003C (r1 DELL   SNDYBRDG  6222004 MSFT       97)
> (XEN) ACPI: HPET 07FEEC18, 0038 (r1 A M I   PCHHPET  6222004 AMI.        3)
> (XEN) ACPI: BOOT 07FEEB98, 0028 (r1 DELL   CBX3      6222004 AMI     10013)
> (XEN) ACPI: SSDT 07F75018, 0804 (r1  PmRef  Cpu0Ist     3000 INTL 20090903)
> (XEN) ACPI: SSDT 07F74018, 0996 (r1  PmRef    CpuPm     3000 INTL 20090903)
> (XEN) ACPI: DMAR 07F90C18, 00E8 (r1 INTEL      SNB         1 INTL        1)
> (XEN) ACPI: SLIC 07F7EC18, 0176 (r3 DELL    CBX3     6222004 MSFT    10013)
> (XEN) System RAM: 16262MB (16652432kB)
> (XEN) Domain heap initialised
> (XEN) ACPI: 32/64X FACS address mismatch in FADT - 07fede40/0000000007fedd40, using 32
> (XEN) Processor #0 6:10 APIC version 21
> (XEN) Processor #2 6:10 APIC version 21
> (XEN) Processor #1 6:10 APIC version 21
> (XEN) Processor #3 6:10 APIC version 21
> (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) Table is not found!
> (XEN) Switched to APIC driver x2apic_cluster.
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2494.416 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) Intel VT-d supported page sizes: 4kB.
> (XEN) Intel VT-d supported page sizes: 4kB.
> (XEN) Intel VT-d Snoop Control not enabled.
> (XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
> (XEN) Intel VT-d Queued Invalidation enabled.
> (XEN) Intel VT-d Interrupt Remapping enabled.
> (XEN) Intel VT-d Shared EPT tables not enabled.
> (XEN) I/O virtualisation enabled
> (XEN)  - Dom0 mode: Relaxed
> (XEN) Enabled directed EOI with ioapic_ack_old on!
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using old ACK method
> (XEN) Platform timer appears to have unexpectedly wrapped 1 times.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Allocated console ring of 16 KiB.
> (XEN) VMX: Supported advanced features:
> (XEN)  - APIC MMIO access virtualisation
> (XEN)  - APIC TPR shadow
> (XEN)  - Extended Page Tables (EPT)
> (XEN)  - Virtual-Processor Identifiers (VPID)
> (XEN)  - Virtual NMI
> (XEN)  - MSR direct-access bitmap
> (XEN)  - Unrestricted Guest
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging (HAP) detected
> (XEN) HVM: HAP page sizes: 4kB, 2MB
> (XEN) Brought up 4 CPUs
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1e13000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000418000000->000000041c000000 (4046567 pages to be allocated)
> (XEN)  Init. ramdisk: 000000042b335000->000000042dfffc00
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: ffffffff81000000->ffffffff81e13000
> (XEN)  Init. ramdisk: ffffffff81e13000->ffffffff84addc00
> (XEN)  Phys-Mach map: ffffffff84ade000->ffffffff869f3d90
> (XEN)  Start info:    ffffffff869f4000->ffffffff869f44b4
> (XEN)  Page tables:   ffffffff869f5000->ffffffff86a2e000
> (XEN)  Boot stack:    ffffffff86a2e000->ffffffff86a2f000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff86c00000
> (XEN)  ENTRY ADDRESS: ffffffff8188e200
> (XEN) Dom0 has maximum 4 VCPUs
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
> (XEN) Freed 216kB init memory.
> (XEN) no cpu_id for acpi_id 5
> (XEN) no cpu_id for acpi_id 6
> (XEN) no cpu_id for acpi_id 7
> (XEN) no cpu_id for acpi_id 8
> (XEN) physdev.c:171: dom0: wrong map_pirq type 3
> (XEN) traps.c:2488:d1 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc9000057b030.
> (XEN) traps.c:2488:d1 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000718030.
> (XEN) traps.c:2488:d2 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc900004f2030.
> (XEN) traps.c:2488:d2 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc900004fa030.
> (XEN) traps.c:2488:d3 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000251030.
> (XEN) traps.c:2488:d3 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000263030.
> (XEN) traps.c:2488:d3 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc9000026b030.
> (XEN) traps.c:2488:d3 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000273030.
> (XEN) traps.c:2488:d4 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc900004f2030.
> (XEN) traps.c:2488:d4 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000015030.
> (XEN) traps.c:2488:d5 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc900004f2030.
> (XEN) traps.c:2488:d5 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000015030.
> (XEN) traps.c:2488:d6 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc900004f2030.
> (XEN) traps.c:2488:d6 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc900004fa030.
> (XEN) Disabling non-boot CPUs ...
> (XEN) Broke affinity for irq 1
> (XEN) Broke affinity for irq 8
> (XEN) Broke affinity for irq 9
> (XEN) Broke affinity for irq 12
> (XEN) Broke affinity for irq 17
> (XEN) Broke affinity for irq 31
> (XEN) Broke affinity for irq 16
> (XEN) Broke affinity for irq 20
> (XEN) Entering ACPI S3 state.
> (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
> (XEN) CPU0 CMCI LVT vector (0xf7) already installed
> (XEN) CPU0: Thermal LVT vector (0xfa) already installed
> (XEN) Finishing wakeup from ACPI S3 state.
> (XEN) Enabling non-boot CPUs  ...
> (XEN) traps.c:2488:d7 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000524030.
> (XEN) traps.c:2488:d7 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc9000052c030.
> (XEN) traps.c:2488:d7 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc90000015030.
> (XEN) traps.c:2488:d7 Domain attempted WRMSR 0000000000000079 from 0x0000000000000000 to 0xffffc9000001d030.
> (XEN) Dumping timer queues:
> (XEN) CPU00:
> (XEN)   ex=     126us timer=ffff8300c83b0060 cb=ffff82c48011e420(ffff8300c83b0000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=    1778us timer=ffff8304222f9de8 cb=ffff82c480118250(0000000000000000) csched_tick+0x0/0x2e0
> (XEN)   ex=     126us timer=ffff8300c81fc060 cb=ffff82c48011e420(ffff8300c81fc000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   17227us timer=ffff82c4802bb980 cb=ffff82c480138ff0(ffff82c4802bb940) do_dbs_timer+0x0/0x250
> (XEN)   ex=   20744us timer=ffff830030094060 cb=ffff82c48011e420(ffff830030094000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   27945us timer=ffff8304222fdde0 cb=ffff82c480116f20(ffff8304222fddc0) csched_acct+0x0/0x460
> (XEN)   ex=   29949us timer=ffff82c4802bb760 cb=ffff82c48011ded0(0000000000000000) s_timer_fn+0x0/0x20
> (XEN)   ex=   87774us timer=ffff83008db6a060 cb=ffff82c48011e420(ffff83008db6a000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   79252us timer=ffff82c4802b3880 cb=ffff82c480177160(0000000000000000) time_calibration+0x0/0x60
> (XEN)   ex=  703146us timer=ffff8300a6b9c060 cb=ffff82c48011e420(ffff8300a6b9c000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   35612us timer=ffff8300330dc060 cb=ffff82c48011e420(ffff8300330dc000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   97688us timer=ffff8300a6b98060 cb=ffff82c48011e420(ffff8300a6b98000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   30003us timer=ffff8300b129a060 cb=ffff82c48011e420(ffff8300b129a000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   92679us timer=ffff8300c94a6060 cb=ffff82c48011e420(ffff8300c94a6000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex= 4135118us timer=ffff8300bdca6060 cb=ffff82c48011e420(ffff8300bdca6000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   96411us timer=ffff8300b128e060 cb=ffff82c48011e420(ffff8300b128e000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex= 1337866us timer=ffff8300a6b94060 cb=ffff82c48011e420(ffff8300a6b94000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   91194us timer=ffff830034b98060 cb=ffff82c48011e420(ffff830034b98000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   97955us timer=ffff83007d948060 cb=ffff82c48011e420(ffff83007d948000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex= 4135163us timer=ffff8300c5336060 cb=ffff82c48011e420(ffff8300c5336000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=123464409us timer=ffff82c4802b3980 cb=ffff82c480176ef0(0000000000000000) plt_overflow+0x0/0x190
> (XEN)   ex=   95968us timer=ffff8300a6b96060 cb=ffff82c48011e420(ffff8300a6b96000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=12401701us timer=ffff82c4802b65a0 cb=ffff82c48019eb10(0000000000000000) mce_work_fn+0x0/0xd0
> (XEN)   ex=   97804us timer=ffff8300301a8060 cb=ffff82c48011e420(ffff8300301a8000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   97841us timer=ffff8300bd810060 cb=ffff82c48011e420(ffff8300bd810000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   98039us timer=ffff83007d94c060 cb=ffff82c48011e420(ffff83007d94c000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=   94727us timer=ffff83008db6e060 cb=ffff82c48011e420(ffff83008db6e000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN)   ex=  319927us timer=ffff8300c840c060 cb=ffff82c48011e420(ffff8300c840c000) vcpu_singleshot_timer_fn+0x0/0x10
> (XEN) CPU01:
> (XEN) CPU02:
> (XEN) CPU03:
> (XEN) 'c' pressed -> printing ACPI Cx structures
> (XEN) ==cpu0==
> (XEN) active state:           C3
> (XEN) max_cstate:             C7
> (XEN) states:
> (XEN)     C1: type[C1] latency[000] usage[00254665] method[ HALT] duration[62720099833]
> (XEN)     C2: type[C2] latency[080] usage[00069505] method[SYSIO] duration[36499255195]
> (XEN)    *C3: type[C3] latency[109] usage[01828952] method[SYSIO] duration[5562126933174]
> (XEN)     C0: usage[02153122] duration[2042526389598]
> (XEN) PC3[0] PC6[0] PC7[0]
> (XEN) CC3[0] CC6[0]
> (XEN) ==cpu1==
> (XEN) active state:           C1
> (XEN) max_cstate:             C7
> (XEN) states:
> (XEN)    *C1: type[C1] latency[000] usage[00808027] method[ HALT] duration[6978799306750]
> (XEN)     C0: usage[00808027] duration[725073398104]
> (XEN) PC3[0] PC6[0] PC7[0]
> (XEN) CC3[0] CC6[0]
> (XEN) ==cpu2==
> (XEN) active state:           C1
> (XEN) max_cstate:             C7
> (XEN) states:
> (XEN)    *C1: type[C1] latency[000] usage[00825022] method[ HALT] duration[6981527416097]
> (XEN)     C0: usage[00825022] duration[722345319882]
> (XEN) PC3[0] PC6[0] PC7[0]
> (XEN) CC3[0] CC6[0]
> (XEN) ==cpu3==
> (XEN) active state:           C1
> (XEN) max_cstate:             C7
> (XEN) states:
> (XEN)    *C1: type[C1] latency[000] usage[00810292] method[ HALT] duration[6980835907857]
> (XEN)     C0: usage[00810292] duration[723036844779]
> (XEN) PC3[0] PC6[0] PC7[0]
> (XEN) CC3[0] CC6[0]




> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.