[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] stubdom/vtpm: make state save operation atomic
On 11/27/2012 05:16 PM, Daniel De Graaf wrote: Instead of statically defining a slot size and stressing over whether or not it may be too small, why not make it half the size of the disk image? You can retrieve the disk size by doing fstat(blkfront_fd).This changes the save format of the vtpm stubdom to include two copies of the saved data: one active, and one inactive. When saving the state, data is written to the inactive slot before updating the key and hash saved with the TPM Manager, which determines the active slot when the vTPM starts up. Signed-off-by: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx> --- stubdom/vtpm/vtpmblk.c | 66 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 54 insertions(+), 12 deletions(-) diff --git a/stubdom/vtpm/vtpmblk.c b/stubdom/vtpm/vtpmblk.c index b343bd8..f988606 100644 --- a/stubdom/vtpm/vtpmblk.c +++ b/stubdom/vtpm/vtpmblk.c @@ -23,6 +23,8 @@/*Encryption key and block sizes */#define BLKSZ 16 +/* Maximum size of one saved-state slot */ +#define SLOT_SIZE 32768 static struct blkfront_dev* blkdev = NULL;Should add which slot were writing to and possibly the disk offset as well to the debug printstatic int blkfront_fd = -1; @@ -59,15 +61,20 @@ void shutdown_vtpmblk(void) blkdev = NULL; }-int write_vtpmblk_raw(uint8_t *data, size_t data_length)+static int write_vtpmblk_raw(uint8_t *data, size_t data_length, int slot) { int rc; uint32_t lenbuf; debug("Begin Write data=%p len=%u", data, data_length); + if (data_length > SLOT_SIZE - 4) {+ error("write(data) cannot fit in data slot (%d). Increase SLOT_SIZE.", data_length); + return -1; + } + lenbuf = cpu_to_be32((uint32_t)data_length);- lseek(blkfront_fd, 0, SEEK_SET);+ lseek(blkfront_fd, slot * SLOT_SIZE, SEEK_SET); if((rc = write(blkfront_fd, (uint8_t*)&lenbuf, 4)) != 4) { error("write(length) failed! error was %s", strerror(errno)); return -1; @@ -82,12 +89,12 @@ int write_vtpmblk_raw(uint8_t *data, size_t data_length) return 0; }-int read_vtpmblk_raw(uint8_t **data, size_t *data_length)+static int read_vtpmblk_raw(uint8_t **data, size_t *data_length, int slot) { int rc; uint32_t lenbuf;- lseek(blkfront_fd, 0, SEEK_SET);+ lseek(blkfront_fd, slot * SLOT_SIZE, SEEK_SET); if(( rc = read(blkfront_fd, (uint8_t*)&lenbuf, 4)) != 4) { error("read(length) failed! error was %s", strerror(errno)); return -1; @@ -97,6 +104,10 @@ int read_vtpmblk_raw(uint8_t **data, size_t *data_length) error("read 0 data_length for NVM"); return -1; } + if(*data_length > SLOT_SIZE - 4) { + error("read invalid data_length for NVM"); + return -1; + }*data = tpm_malloc(*data_length);if((rc = read(blkfront_fd, *data, *data_length)) != *data_length) { @@ -221,6 +232,8 @@ egress: return rc; }+static int active_slot = -1; I think we should initialize to 0 or 1 because -1 is an invalid state. For a new vtpm, read_vtpmblk() will fail and I think this is what happens: read_vtpmblk() try_fetch_key_from_manager() -> fails goto abort_egress active_slot = -1 (you have this below) Then later write_vtpmblk() active_slot = !active_slot (!-1 = 0)The last line happens to work correctly but I don't think its very clear. I think we should initialize to 1 and set it to 1 if read_vtpmblk() fails. Also a minor nitpick, the name is active_slot, but what it really is is the last_slot_written_to because everytime you write you change it first. + int write_vtpmblk(struct tpmfront_dev* tpmfront_dev, uint8_t* data, size_t data_length) { int rc; uint8_t* cipher = NULL; @@ -228,12 +241,15 @@ int write_vtpmblk(struct tpmfront_dev* tpmfront_dev, uint8_t* data, size_t data_ uint8_t hashkey[HASHKEYSZ]; uint8_t* symkey = hashkey + HASHSZ;+ /* Switch to the other slot */+ active_slot = !active_slot; + /* Encrypt the data */ if((rc = encrypt_vtpmblk(data, data_length, &cipher, &cipher_len, symkey))) { goto abort_egress; } /* Write to disk */ - if((rc = write_vtpmblk_raw(cipher, cipher_len))) { + if((rc = write_vtpmblk_raw(cipher, cipher_len, active_slot))) { goto abort_egress; } /* Get sha1 hash of data */ @@ -256,7 +272,8 @@ int read_vtpmblk(struct tpmfront_dev* tpmfront_dev, uint8_t** data, size_t *data size_t cipher_len = 0; size_t keysize; uint8_t* hashkey = NULL; - uint8_t hash[HASHSZ]; + uint8_t hash0[HASHSZ]; + uint8_t hash1[HASHSZ]; uint8_t* symkey;/* Retreive the hash and the key from the manager */@@ -270,14 +287,32 @@ int read_vtpmblk(struct tpmfront_dev* tpmfront_dev, uint8_t** data, size_t *data } symkey = hashkey + HASHSZ;- /* Read from disk now */- if((rc = read_vtpmblk_raw(&cipher, &cipher_len))) { + active_slot = 0; + /* Read slot 0 from disk now */ + if((rc = read_vtpmblk_raw(&cipher, &cipher_len, 0))) { + goto abort_egress; + } + + /* Compute the hash of the cipher text and compare */ + sha1(cipher, cipher_len, hash0); + if(!memcmp(hash0, hashkey, HASHSZ)) + goto valid; + + free(cipher); + cipher = NULL; + + active_slot = 1; + /* Read slot 1 from disk now */ + if((rc = read_vtpmblk_raw(&cipher, &cipher_len, 1))) { goto abort_egress; }/* Compute the hash of the cipher text and compare */- sha1(cipher, cipher_len, hash); - if(memcmp(hash, hashkey, HASHSZ)) { + sha1(cipher, cipher_len, hash1); + if(!memcmp(hash1, hashkey, HASHSZ)) + goto valid; + + { int i; error("NVM Storage Checksum failed!"); printf("Expected: "); @@ -285,14 +320,20 @@ int read_vtpmblk(struct tpmfront_dev* tpmfront_dev, uint8_t** data, size_t *data printf("%02hhX ", hashkey[i]); } printf("\n"); - printf("Actual: "); + printf("Slot 0: "); + for(i = 0; i < HASHSZ; ++i) { + printf("%02hhX ", hash0[i]); + } + printf("\n"); + printf("Slot 1: "); for(i = 0; i < HASHSZ; ++i) { - printf("%02hhX ", hash[i]); + printf("%02hhX ", hash1[i]); } printf("\n"); rc = -1; goto abort_egress; } +valid:/* Decrypt the blob */if((rc = decrypt_vtpmblk(cipher, cipher_len, data, data_length, symkey))) { @@ -300,6 +341,7 @@ int read_vtpmblk(struct tpmfront_dev* tpmfront_dev, uint8_t** data, size_t *data } goto egress; abort_egress: + active_slot = -1; See my comment above egress: free(cipher); free(hashkey); Attachment:
smime.p7s _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |