Xen project Mailing List

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.6.1-xen (root@lca-fw) (gcc version 4.7.1 (Debian 4.7.1-7) ) #1 SMP Wed Oct 10 22:46:05 BRT 2012

[ 0.000000] Command line: placeholder root=/dev/mapper/xen-fw_root ro

[ 0.000000] Freeing 6c-6d pfn range: 1 pages freed

[ 0.000000] 1-1 mapping on 6c->6d

[ 0.000000] Freeing 9f-100 pfn range: 97 pages freed

[ 0.000000] 1-1 mapping on 9f->100

[ 0.000000] Freeing 7acb7-7ccb8 pfn range: 8193 pages freed

[ 0.000000] 1-1 mapping on 7acb7->7ccb8

[ 0.000000] Freeing 7d4f0-7d51b pfn range: 43 pages freed

[ 0.000000] 1-1 mapping on 7d4f0->7d51b

[ 0.000000] Freeing 7d53f-7d56a pfn range: 43 pages freed

[ 0.000000] 1-1 mapping on 7d53f->7d56a

[ 0.000000] Freeing 7d704-7d7b4 pfn range: 176 pages freed

[ 0.000000] 1-1 mapping on 7d704->7d7b4

[ 0.000000] Freeing 7f5ef-7f7ff pfn range: 528 pages freed

[ 0.000000] 1-1 mapping on 7f5ef->7f7ff

[ 0.000000] Freeing 7f800-f258d pfn range: 470413 pages freed

[ 0.000000] 1-1 mapping on 7f800->100000

[ 0.000000] Released 479494 pages of unused memory

[ 0.000000] Set 535417 page(s) to 1-1 mapping

[ 0.000000] Populating 100000-175106 pfn range: 479494 pages added

[ 0.000000] e820: BIOS-provided physical RAM map:

[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000006bfff] usable

[ 0.000000] Xen: [mem 0x000000000006c000-0x000000000006cfff] ACPI NVS

[ 0.000000] Xen: [mem 0x000000000006d000-0x000000000009efff] usable

[ 0.000000] Xen: [mem 0x000000000009f000-0x000000000009ffff] ACPI NVS

[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved

[ 0.000000] Xen: [mem 0x0000000000100000-0x000000007acb6fff] usable

[ 0.000000] Xen: [mem 0x000000007acb7000-0x000000007ccb7fff] reserved

[ 0.000000] Xen: [mem 0x000000007ccb8000-0x000000007d4effff] usable

[ 0.000000] Xen: [mem 0x000000007d4f0000-0x000000007d51afff] reserved

[ 0.000000] Xen: [mem 0x000000007d51b000-0x000000007d53efff] usable

[ 0.000000] Xen: [mem 0x000000007d53f000-0x000000007d569fff] reserved

[ 0.000000] Xen: [mem 0x000000007d56a000-0x000000007d703fff] usable

[ 0.000000] Xen: [mem 0x000000007d704000-0x000000007d7b3fff] reserved

[ 0.000000] Xen: [mem 0x000000007d7b4000-0x000000007f5eefff] usable

[ 0.000000] Xen: [mem 0x000000007f5ef000-0x000000007f6defff] reserved

[ 0.000000] Xen: [mem 0x000000007f6df000-0x000000007f7defff] ACPI NVS

[ 0.000000] Xen: [mem 0x000000007f7df000-0x000000007f7fefff] ACPI data

[ 0.000000] Xen: [mem 0x000000007f7ff000-0x000000007f7fffff] usable

[ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved

[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[ 0.000000] Xen: [mem 0x00000000ff800000-0x00000000ffffffff] reserved

[ 0.000000] Xen: [mem 0x0000000100000000-0x000000017fffffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI 2.5 present.

[ 0.000000] DMI: IBM System x3650 M3 -[7945AC1]-/00D4062, BIOS -[D6E157AUS-1.15]- 06/13/2012

[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved

[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] No AGP bridge found

[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000

[ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000

[ 0.000000] initial memory mapped: [mem 0x00000000-0x02334fff]

[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576

[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7f7fffff]

[ 0.000000] [mem 0x00000000-0x7f7fffff] page 4k

[ 0.000000] kernel direct mapping tables up to 0x7f7fffff @ [mem 0x01831000-0x01c2ffff]

[ 0.000000] xen: setting RW the range 1c14000 - 1c30000

[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]

[ 0.000000] [mem 0x100000000-0x17fffffff] page 4k

[ 0.000000] kernel direct mapping tables up to 0x17fffffff @ [mem 0x7e9e8000-0x7f5eefff]

[ 0.000000] xen: setting RW the range 7edea000 - 7f5ef000

[ 0.000000] RAMDISK: [mem 0x01c30000-0x02334fff]

[ 0.000000] ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219)

[ 0.000000] NUMA turned off

[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]

[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17fffffff]

[ 0.000000] NODE_DATA [mem 0x175102000-0x175105fff]

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x00010000-0x00ffffff]

[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]

[ 0.000000] Normal [mem 0x100000000-0x17fffffff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00010000-0x0006bfff]

[ 0.000000] node 0: [mem 0x0006d000-0x0009efff]

[ 0.000000] node 0: [mem 0x00100000-0x7acb6fff]

[ 0.000000] node 0: [mem 0x7ccb8000-0x7d4effff]

[ 0.000000] node 0: [mem 0x7d51b000-0x7d53efff]

[ 0.000000] node 0: [mem 0x7d56a000-0x7d703fff]

[ 0.000000] node 0: [mem 0x7d7b4000-0x7f5eefff]

[ 0.000000] node 0: [mem 0x7f7ff000-0x7f7fffff]

[ 0.000000] node 0: [mem 0x100000000-0x17fffffff]

[ 0.000000] On node 0 totalpages: 1037431

[ 0.000000] DMA zone: 56 pages used for memmap

[ 0.000000] DMA zone: 6 pages reserved

[ 0.000000] DMA zone: 3920 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 14280 pages used for memmap

[ 0.000000] DMA32 zone: 494881 pages, LIFO batch:31

[ 0.000000] Normal zone: 7168 pages used for memmap

[ 0.000000] Normal zone: 517120 pages, LIFO batch:31

[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org

[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 16

[ 0.000000] PM: Registered nosave memory: 000000000006c000 - 000000000006d000

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 000000007acb7000 - 000000007ccb8000

[ 0.000000] PM: Registered nosave memory: 000000007d4f0000 - 000000007d51b000

[ 0.000000] PM: Registered nosave memory: 000000007d53f000 - 000000007d56a000

[ 0.000000] PM: Registered nosave memory: 000000007d704000 - 000000007d7b4000

[ 0.000000] PM: Registered nosave memory: 000000007f5ef000 - 000000007f6df000

[ 0.000000] PM: Registered nosave memory: 000000007f6df000 - 000000007f7df000

[ 0.000000] PM: Registered nosave memory: 000000007f7df000 - 000000007f7ff000

[ 0.000000] PM: Registered nosave memory: 000000007f800000 - 0000000080000000

[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 0000000090000000

[ 0.000000] PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000

[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000

[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000

[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000

[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000

[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000

[ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on Xen

[ 0.000000] Xen version: 4.2.0 (preserve-AD)

[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880174e00000 s83840 r8192 d22656 u2097152

[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u2097152 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0

[ 1.096975] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1015921

[ 1.096977] Policy zone: Normal

[ 1.096979] Kernel command line: placeholder root=/dev/mapper/xen-fw_root ro

[ 1.097016] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 1.097021] __ex_table already sorted, skipping sort

[ 1.121932] software IO TLB [mem 0x16c800000-0x1707fffff] (64MB) mapped at [ffff88016c800000-ffff8801707fffff]

[ 1.138656] Memory: 3815116k/6291456k available (3573k kernel code, 2141732k absent, 334608k reserved, 3147k data, 592k init)

[ 1.138717] Hierarchical RCU implementation.

[ 1.138718] RCU dyntick-idle grace-period acceleration is enabled.

[ 1.138719] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.

[ 1.138728] NR_IRQS:33024 nr_irqs:256 16

[ 1.147171] Console: colour VGA+ 80x25

[ 1.154296] console [tty0] enabled

[ 1.159002] allocated 16777216 bytes of page_cgroup

[ 1.159079] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 1.159208] Xen: using vcpuop timer interface

[ 1.159214] installing Xen timer for CPU 0

[ 1.159303] tsc: Detected 2400.126 MHz processor

[ 1.159375] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.25 BogoMIPS (lpj=9600504)

[ 1.159517] pid_max: default: 32768 minimum: 301

[ 1.159607] Security Framework initialized

[ 1.159680] AppArmor: AppArmor disabled by boot time parameter

[ 1.160298] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 1.161752] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 1.162415] Mount-cache hash table entries: 256

[ 1.162658] Initializing cgroup subsys cpuacct

[ 1.162729] Initializing cgroup subsys memory

[ 1.162806] Initializing cgroup subsys devices

[ 1.162876] Initializing cgroup subsys freezer

[ 1.162945] Initializing cgroup subsys net_cls

[ 1.163014] Initializing cgroup subsys blkio

[ 1.163082] Initializing cgroup subsys perf_event

[ 1.163204] CPU: Physical Processor ID: 0

[ 1.163277] CPU: Processor Core ID: 0

[ 1.163346] mce: CPU supports 2 MCE banks

[ 1.163452] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7

[ 1.163452] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32

[ 1.163452] tlb_flushall_shift is 0x6

[ 1.163602] SMP alternatives: switching to UP code

[ 1.171342] Freeing SMP alternatives: 8k freed

[ 1.171471] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.

[ 1.171785] NMI watchdog: disabled (cpu0): hardware events not enabled

[ 1.171876] Brought up 1 CPUs

[ 1.172058] devtmpfs: initialized

[ 1.174970] PM: Registering ACPI NVS region [mem 0x0006c000-0x0006cfff] (4096 bytes)

[ 1.175062] PM: Registering ACPI NVS region [mem 0x0009f000-0x0009ffff] (4096 bytes)

[ 1.175153] PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f7defff] (1048576 bytes)

[ 1.175314] Grant tables using version 2 layout.

[ 1.175394] Grant table initialized

[ 1.175514] dummy:

[ 1.175625] NET: Registered protocol family 16

[ 1.175969] PCI: Using configuration type 1 for base access

[ 1.176599] bio: create slab <bio-0> at 0

[ 1.176719] ACPI: Interpreter disabled.

[ 1.176796] xen/balloon: Initialising balloon driver.

[ 1.177620] xen-balloon: Initialising balloon driver.

[ 1.177761] vgaarb: loaded

[ 1.177860] PCI: Probing PCI hardware

[ 1.177929] PCI: root bus 00: using default resources

[ 1.177930] PCI: Probing PCI hardware (bus 00)

[ 1.177954] PCI host bridge to bus 0000:00

[ 1.178025] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]

[ 1.178098] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]

[ 1.178173] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]

[ 1.178266] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]

[ 1.178287] pci 0000:00:00.0: [8086:3406] type 00 class 0x060000

[ 1.178389] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold

[ 1.178425] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400

[ 1.178532] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 1.178571] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400

[ 1.178678] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

[ 1.178716] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400

[ 1.178824] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

[ 1.178865] pci 0000:00:05.0: [8086:340c] type 01 class 0x060400

[ 1.178973] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold

[ 1.179013] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400

[ 1.179121] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold

[ 1.179161] pci 0000:00:09.0: [8086:3410] type 01 class 0x060400

[ 1.179269] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold

[ 1.179309] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000

[ 1.179434] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000

[ 1.179543] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000

[ 1.179668] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000

[ 1.179795] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000

[ 1.179919] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000

[ 1.180053] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000

[ 1.180172] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000

[ 1.180273] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020

[ 1.180387] pci 0000:00:16.0: [8086:3430] type 00 class 0x088000

[ 1.180408] pci 0000:00:16.0: reg 10: [mem 0x97a00000-0x97a03fff 64bit]

[ 1.180540] pci 0000:00:16.1: [8086:3431] type 00 class 0x088000

[ 1.180561] pci 0000:00:16.1: reg 10: [mem 0x97a04000-0x97a07fff 64bit]

[ 1.180693] pci 0000:00:16.2: [8086:3432] type 00 class 0x088000

[ 1.180713] pci 0000:00:16.2: reg 10: [mem 0x97a08000-0x97a0bfff 64bit]

[ 1.180845] pci 0000:00:16.3: [8086:3433] type 00 class 0x088000

[ 1.180866] pci 0000:00:16.3: reg 10: [mem 0x97a0c000-0x97a0ffff 64bit]

[ 1.180997] pci 0000:00:16.4: [8086:3429] type 00 class 0x088000

[ 1.181018] pci 0000:00:16.4: reg 10: [mem 0x97a10000-0x97a13fff 64bit]

[ 1.181150] pci 0000:00:16.5: [8086:342a] type 00 class 0x088000

[ 1.181170] pci 0000:00:16.5: reg 10: [mem 0x97a14000-0x97a17fff 64bit]

[ 1.181302] pci 0000:00:16.6: [8086:342b] type 00 class 0x088000

[ 1.181323] pci 0000:00:16.6: reg 10: [mem 0x97a18000-0x97a1bfff 64bit]

[ 1.181455] pci 0000:00:16.7: [8086:342c] type 00 class 0x088000

[ 1.181475] pci 0000:00:16.7: reg 10: [mem 0x97a1c000-0x97a1ffff 64bit]

[ 1.181610] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300

[ 1.181681] pci 0000:00:1a.0: reg 20: [io 0x20a0-0x20bf]

[ 1.181766] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300

[ 1.181837] pci 0000:00:1a.1: reg 20: [io 0x2080-0x209f]

[ 1.181937] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320

[ 1.181970] pci 0000:00:1a.7: reg 10: [mem 0x97a21000-0x97a213ff]

[ 1.182116] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[ 1.182153] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400

[ 1.182274] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 1.182316] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400

[ 1.182435] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[ 1.182478] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300

[ 1.182549] pci 0000:00:1d.0: reg 20: [io 0x2060-0x207f]

[ 1.182634] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300

[ 1.182705] pci 0000:00:1d.1: reg 20: [io 0x2040-0x205f]

[ 1.182790] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300

[ 1.182860] pci 0000:00:1d.2: reg 20: [io 0x2020-0x203f]

[ 1.182960] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320

[ 1.182993] pci 0000:00:1d.7: reg 10: [mem 0x97a20000-0x97a203ff]

[ 1.183138] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 1.183173] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[ 1.183279] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100

[ 1.183458] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f

[ 1.183484] pci 0000:00:1f.2: reg 10: [io 0x2118-0x211f]

[ 1.183497] pci 0000:00:1f.2: reg 14: [io 0x212c-0x212f]

[ 1.183510] pci 0000:00:1f.2: reg 18: [io 0x2110-0x2117]

[ 1.183522] pci 0000:00:1f.2: reg 1c: [io 0x2128-0x212b]

[ 1.183535] pci 0000:00:1f.2: reg 20: [io 0x20f0-0x20ff]

[ 1.183548] pci 0000:00:1f.2: reg 24: [io 0x20e0-0x20ef]

[ 1.183629] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500

[ 1.183653] pci 0000:00:1f.3: reg 10: [mem 0x97a22000-0x97a220ff 64bit]

[ 1.183689] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]

[ 1.183746] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185

[ 1.183772] pci 0000:00:1f.5: reg 10: [io 0x2108-0x210f]

[ 1.183784] pci 0000:00:1f.5: reg 14: [io 0x2124-0x2127]

[ 1.183797] pci 0000:00:1f.5: reg 18: [io 0x2100-0x2107]

[ 1.183816] pci 0000:00:1f.5: reg 1c: [io 0x2120-0x2123]

[ 1.183829] pci 0000:00:1f.5: reg 20: [io 0x20d0-0x20df]

[ 1.183841] pci 0000:00:1f.5: reg 24: [io 0x20c0-0x20cf]

[ 1.183985] pci_bus 0000:0b: busn_res: [bus 0b-0f] is inserted under [bus 00-ff]

[ 1.184016] pci 0000:0b:00.0: [14e4:1639] type 00 class 0x020000

[ 1.184040] pci 0000:0b:00.0: reg 10: [mem 0x92000000-0x93ffffff 64bit]

[ 1.184181] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold

[ 1.184224] pci 0000:0b:00.1: [14e4:1639] type 00 class 0x020000

[ 1.184248] pci 0000:0b:00.1: reg 10: [mem 0x94000000-0x95ffffff 64bit]

[ 1.184390] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold

[ 1.191939] pci 0000:00:01.0: PCI bridge to [bus 0b-0f]

[ 1.192017] pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]

[ 1.192089] pci_bus 0000:10: busn_res: [bus 10-14] is inserted under [bus 00-ff]

[ 1.192093] pci 0000:00:02.0: PCI bridge to [bus 10-14]

[ 1.192240] pci_bus 0000:15: busn_res: [bus 15-19] is inserted under [bus 00-ff]

[ 1.192244] pci 0000:00:03.0: PCI bridge to [bus 15-19]

[ 1.192389] pci_bus 0000:1a: busn_res: [bus 1a-1e] is inserted under [bus 00-ff]

[ 1.192392] pci 0000:00:05.0: PCI bridge to [bus 1a-1e]

[ 1.192539] pci_bus 0000:1f: busn_res: [bus 1f-23] is inserted under [bus 00-ff]

[ 1.192542] pci 0000:00:07.0: PCI bridge to [bus 1f-23]

[ 1.192688] pci_bus 0000:24: busn_res: [bus 24-28] is inserted under [bus 00-ff]

[ 1.192691] pci 0000:00:09.0: PCI bridge to [bus 24-28]

[ 1.192838] pci_bus 0000:01: busn_res: [bus 01-05] is inserted under [bus 00-ff]

[ 1.192863] pci 0000:01:00.0: [1000:0073] type 00 class 0x010400

[ 1.192884] pci 0000:01:00.0: reg 10: [io 0x1000-0x10ff]

[ 1.192908] pci 0000:01:00.0: reg 14: [mem 0x97940000-0x97943fff 64bit]

[ 1.192932] pci 0000:01:00.0: reg 1c: [mem 0x97900000-0x9793ffff 64bit]

[ 1.192962] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]

[ 1.193060] pci 0000:01:00.0: supports D1 D2

[ 1.200042] pci 0000:00:1c.0: PCI bridge to [bus 01-05]

[ 1.200117] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]

[ 1.200123] pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]

[ 1.200196] pci_bus 0000:06: busn_res: [bus 06-0a] is inserted under [bus 00-ff]

[ 1.200228] pci 0000:06:00.0: [101b:0452] type 01 class 0x060400

[ 1.200394] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold

[ 1.208144] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]

[ 1.208223] pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]

[ 1.208231] pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff 64bit pref]

[ 1.208330] pci_bus 0000:07: busn_res: [bus 07] is inserted under [bus 06-0a]

[ 1.208353] pci 0000:07:00.0: [102b:0530] type 00 class 0x030000

[ 1.208388] pci 0000:07:00.0: reg 10: [mem 0x96000000-0x96ffffff pref]

[ 1.208407] pci 0000:07:00.0: reg 14: [mem 0x97800000-0x97803fff]

[ 1.208427] pci 0000:07:00.0: reg 18: [mem 0x97000000-0x977fffff]

[ 1.208633] pci 0000:06:00.0: PCI bridge to [bus 07]

[ 1.208713] pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]

[ 1.208720] pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff pref]

[ 1.208768] pci_bus 0000:29: busn_res: [bus 29-2d] is inserted under [bus 00-ff]

[ 1.208829] pci 0000:00:1e.0: PCI bridge to [bus 29-2d] (subtractive decode)

[ 1.208917] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)

[ 1.208919] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffff] (subtractive decode)

[ 1.208978] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 2d

[ 1.210287] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 1.210898] PCI: pci_cache_line_size set to 64 bytes

[ 1.211078] e820: reserve RAM buffer [mem 0x0006c000-0x0006ffff]

[ 1.211080] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]

[ 1.211081] e820: reserve RAM buffer [mem 0x7acb7000-0x7bffffff]

[ 1.211082] e820: reserve RAM buffer [mem 0x7d4f0000-0x7fffffff]

[ 1.211086] e820: reserve RAM buffer [mem 0x7d53f000-0x7fffffff]

[ 1.211088] e820: reserve RAM buffer [mem 0x7d704000-0x7fffffff]

[ 1.211091] e820: reserve RAM buffer [mem 0x7f5ef000-0x7fffffff]

[ 1.211093] e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]

[ 1.211210] Switching to clocksource xen

[ 1.212720] pnp: PnP ACPI: disabled

[ 1.214391] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]

[ 1.214569] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 01-05] add_size 200000

[ 1.214613] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000

[ 1.214617] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90000000-0x902fffff pref]

[ 1.214708] pci 0000:00:01.0: PCI bridge to [bus 0b-0f]

[ 1.214783] pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]

[ 1.214865] pci 0000:00:02.0: PCI bridge to [bus 10-14]

[ 1.214948] pci 0000:00:03.0: PCI bridge to [bus 15-19]

[ 1.215032] pci 0000:00:05.0: PCI bridge to [bus 1a-1e]

[ 1.215114] pci 0000:00:07.0: PCI bridge to [bus 1f-23]

[ 1.215198] pci 0000:00:09.0: PCI bridge to [bus 24-28]

[ 1.215282] pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x9001ffff pref]

[ 1.215383] pci 0000:00:1c.0: PCI bridge to [bus 01-05]

[ 1.215456] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]

[ 1.215532] pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]

[ 1.215609] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x902fffff pref]

[ 1.215705] pci 0000:06:00.0: PCI bridge to [bus 07]

[ 1.215782] pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]

[ 1.215860] pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff pref]

[ 1.223235] pci 0000:00:1c.4: PCI bridge to [bus 06-0a]

[ 1.223310] pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]

[ 1.223391] pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff 64bit pref]

[ 1.223489] pci 0000:00:1e.0: PCI bridge to [bus 29-2d]

[ 1.223580] pci 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.223680] pci 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.223780] pci 0000:00:03.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.223880] pci 0000:00:05.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.223981] pci 0000:00:07.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.224081] pci 0000:00:09.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.224183] pci 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.224283] pci 0000:00:1c.4: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.224385] pci 0000:06:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.224487] pci 0000:00:1e.0: setting latency timer to 64

[ 1.224492] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]

[ 1.224494] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]

[ 1.224496] pci_bus 0000:0b: resource 1 [mem 0x92000000-0x95ffffff]

[ 1.224498] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]

[ 1.224500] pci_bus 0000:01: resource 1 [mem 0x97900000-0x979fffff]

[ 1.224502] pci_bus 0000:01: resource 2 [mem 0x90000000-0x902fffff pref]

[ 1.224504] pci_bus 0000:06: resource 1 [mem 0x97000000-0x978fffff]

[ 1.224507] pci_bus 0000:06: resource 2 [mem 0x96000000-0x96ffffff 64bit pref]

[ 1.224510] pci_bus 0000:07: resource 1 [mem 0x97000000-0x978fffff]

[ 1.224512] pci_bus 0000:07: resource 2 [mem 0x96000000-0x96ffffff pref]

[ 1.224514] pci_bus 0000:29: resource 4 [io 0x0000-0xffff]

[ 1.224516] pci_bus 0000:29: resource 5 [mem 0x00000000-0xffffffffff]

[ 1.224538] NET: Registered protocol family 2

[ 1.225637] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

[ 1.228185] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 1.228521] TCP: Hash tables configured (established 524288 bind 65536)

[ 1.228613] TCP: reno registered

[ 1.228689] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[ 1.228785] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[ 1.228922] NET: Registered protocol family 1

[ 1.229073] pci 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.229201] pci 0000:00:1a.1: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 1.229325] pci 0000:00:1a.7: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 1.229466] pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.229588] pci 0000:00:1d.1: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 1.229708] pci 0000:00:1d.2: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 1.229836] pci 0000:00:1d.7: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.229986] pci 0000:07:00.0: Boot video device

[ 1.229991] PCI: CLS 64 bytes, default 64

[ 1.230040] Unpacking initramfs...

[ 1.236939] Freeing initrd memory: 7188k freed

[ 1.238401] platform rtc_cmos: registered platform RTC device (no PNP device found)

[ 1.238695] audit: initializing netlink socket (disabled)

[ 1.238779] type=2000 audit(1349925915.231:1): initialized

[ 1.253042] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 1.253247] VFS: Disk quotas dquot_6.5.2

[ 1.253330] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 1.253465] msgmni has been set to 7465

[ 1.253646] alg: No test for stdrng (krng)

[ 1.253730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 1.253820] io scheduler noop registered

[ 1.253888] io scheduler deadline registered

[ 1.253960] io scheduler cfq registered (default)

[ 1.254124] pcieport 0000:00:01.0: device [8086:3408] has invalid IRQ; check vendor BIOS

[ 1.254277] pcieport 0000:00:02.0: device [8086:3409] has invalid IRQ; check vendor BIOS

[ 1.254425] pcieport 0000:00:03.0: device [8086:340a] has invalid IRQ; check vendor BIOS

[ 1.254573] pcieport 0000:00:05.0: device [8086:340c] has invalid IRQ; check vendor BIOS

[ 1.254723] pcieport 0000:00:07.0: device [8086:340e] has invalid IRQ; check vendor BIOS

[ 1.254870] pcieport 0000:00:09.0: device [8086:3410] has invalid IRQ; check vendor BIOS

[ 1.255019] pcieport 0000:00:1c.0: device [8086:3a40] has invalid IRQ; check vendor BIOS

[ 1.255170] pcieport 0000:00:1c.4: device [8086:3a48] has invalid IRQ; check vendor BIOS

[ 1.255389] ioapic: probe of 0000:00:15.0 failed with error -22

[ 1.255467] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 1.255554] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 1.255627] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 1.255752] intel_idle: does not run on family 6 model 44

[ 1.255833] Event-channel device installed.

[ 1.255989] xen-pciback: backend is vpci

[ 1.256298] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 1.277599] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 1.298917] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 1.299221] Linux agpgart interface v0.103

[ 1.299387] i8042: PNP: No PS/2 controller found. Probing ports directly.

[ 1.551430] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.551580] mousedev: PS/2 mouse device common for all mice

[ 1.551800] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0

[ 1.551897] rtc0: alarms up to one day, 114 bytes nvram

[ 1.551972] EFI Variables Facility v0.08 2004-May-17

[ 1.552053] drop_monitor: Initializing network drop monitor service

[ 1.552197] TCP: cubic registered

[ 1.552276] NET: Registered protocol family 10

[ 1.552496] mip6: Mobile IPv6

[ 1.552564] NET: Registered protocol family 17

[ 1.552641] Key type dns_resolver registered

[ 1.552859] PM: Hibernation image not present or could not be loaded.

[ 1.552868] registered taskstats version 1

[ 1.553635] rtc_cmos rtc_cmos: setting system clock to 2012-10-11 03:25:15 UTC (1349925915)

[ 1.553954] Freeing unused kernel memory: 592k freed

[ 1.554130] Write protecting the kernel read-only data: 6144k

[ 1.555798] Freeing unused kernel memory: 512k freed

[ 1.556107] Freeing unused kernel memory: 620k freed

[ 1.583588] udevd[50]: starting version 175

[ 1.657119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 1.663281] SCSI subsystem initialized

[ 1.681024] megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012

[ 1.681111] megasas: 0x1000:0x0073:0x1014:0x03b1: bus 1:slot 0:func 0

[ 1.681241] megaraid_sas 0000:01:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 1.687892] megasas: FW now in Ready state

[ 1.735350] megasas_init_mfi: fw_support_ieee=67108864

[ 1.735407] megasas: INIT adapter done

[ 1.807365] scsi0 : LSI SAS based MegaRAID driver

[ 1.808799] scsi 0:0:8:0: Direct-Access IBM-ESXS ST9146803SS B53C PQ: 0 ANSI: 5

[ 1.811249] scsi 0:0:9:0: Direct-Access ATA ST9500620NS BE24 PQ: 0 ANSI: 5

[ 1.812739] scsi 0:0:10:0: Direct-Access ATA ST9500620NS BE24 PQ: 0 ANSI: 5

[ 1.824208] scsi 0:2:0:0: Direct-Access IBM ServeRAID M1015 2.12 PQ: 0 ANSI: 5

[ 1.839755] sd 0:2:0:0: [sdb] 1949216768 512-byte logical blocks: (997 GB/929 GiB)

[ 1.840060] sd 0:2:0:0: [sdb] Write Protect is off

[ 1.840141] sd 0:2:0:0: [sdb] Mode Sense: 1f 00 10 08

[ 1.840153] sd 0:0:8:0: [sda] 286748000 512-byte logical blocks: (146 GB/136 GiB)

[ 1.840302] sd 0:2:0:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA

[ 1.842564] sd 0:0:8:0: [sda] Write Protect is off

[ 1.842637] sd 0:0:8:0: [sda] Mode Sense: c3 00 10 08

[ 1.843418] sdb: sdb1

[ 1.843898] sd 0:0:8:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA

[ 1.844117] sd 0:2:0:0: [sdb] Attached SCSI disk

[ 1.866028] sda: sda1 sda2 sda3 sda4

[ 1.870498] sd 0:0:8:0: [sda] Attached SCSI disk

[ 2.053157] device-mapper: uevent: version 1.0.3

[ 2.053610] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@xxxxxxxxxx

[ 2.214131] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)

[ 3.162111] udevd[298]: starting version 175

[ 3.419449] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)

[ 3.419565] bnx2 0000:0b:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.420241] bnx2 0000:0b:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 92000000, IRQ 0, node addr 34:40:b5:ab:e5:b4

[ 3.421062] bnx2 0000:0b:00.1: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 3.421705] bnx2 0000:0b:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 94000000, IRQ 0, node addr 34:40:b5:ab:e5:b6

[ 3.428805] dca service started, version 1.12.1

[ 3.467169] EDAC MC: Ver: 3.0.0

[ 3.473824] ioatdma: Intel(R) QuickData Technology Driver 4.00

[ 3.473918] ioatdma 0000:00:16.0: enabling device (0000 -> 0002)

[ 3.473996] ioatdma 0000:00:16.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.474116] ioatdma 0000:00:16.0: channel error register unreachable

[ 3.474191] ioatdma 0000:00:16.0: channel enumeration error

[ 3.505302] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x15

[ 3.505995] ioatdma 0000:00:16.0: Intel(R) I/OAT DMA Engine init failed

[ 3.506096] ioatdma 0000:00:16.1: enabling device (0000 -> 0002)

[ 3.506173] ioatdma 0000:00:16.1: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 3.506296] ioatdma 0000:00:16.1: channel error register unreachable

[ 3.506369] ioatdma 0000:00:16.1: channel enumeration error

[ 3.506441] ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed

[ 3.506532] ioatdma 0000:00:16.2: enabling device (0000 -> 0002)

[ 3.506608] ioatdma 0000:00:16.2: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 3.506722] ioatdma 0000:00:16.2: channel error register unreachable

[ 3.506795] ioatdma 0000:00:16.2: channel enumeration error

[ 3.506867] ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed

[ 3.506957] ioatdma 0000:00:16.3: enabling device (0000 -> 0002)

[ 3.507034] ioatdma 0000:00:16.3: can't find IRQ for PCI INT D; please try using pci=biosirq

[ 3.507147] ioatdma 0000:00:16.3: channel error register unreachable

[ 3.507222] ioatdma 0000:00:16.3: channel enumeration error

[ 3.507294] ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed

[ 3.507398] ioatdma 0000:00:16.4: enabling device (0000 -> 0002)

[ 3.507476] ioatdma 0000:00:16.4: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.507590] ioatdma 0000:00:16.4: channel error register unreachable

[ 3.507663] ioatdma 0000:00:16.4: channel enumeration error

[ 3.507735] ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed

[ 3.507826] ioatdma 0000:00:16.5: enabling device (0000 -> 0002)

[ 3.507903] ioatdma 0000:00:16.5: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 3.508016] ioatdma 0000:00:16.5: channel error register unreachable

[ 3.508090] ioatdma 0000:00:16.5: channel enumeration error

[ 3.508162] ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed

[ 3.508255] ioatdma 0000:00:16.6: enabling device (0000 -> 0002)

[ 3.508337] ioatdma 0000:00:16.6: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 3.508454] ioatdma 0000:00:16.6: channel error register unreachable

[ 3.508529] ioatdma 0000:00:16.6: channel enumeration error

[ 3.508601] ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed

[ 3.508692] ioatdma 0000:00:16.7: enabling device (0000 -> 0002)

[ 3.508769] ioatdma 0000:00:16.7: can't find IRQ for PCI INT D; please try using pci=biosirq

[ 3.508885] ioatdma 0000:00:16.7: channel error register unreachable

[ 3.508958] ioatdma 0000:00:16.7: channel enumeration error

[ 3.509030] ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed

[ 3.571248] usbcore: registered new interface driver usbfs

[ 3.571330] usbcore: registered new interface driver hub

[ 3.585483] ACPI Exception: AE_BAD_PARAMETER, Thread 1786484928 could not acquire Mutex [0x1] (20120711/utmutex-276)

[ 3.585675] ACPI Exception: AE_BAD_PARAMETER, Thread 1786484928 could not acquire Mutex [0x1] (20120711/utmutex-276)

[ 3.590919] usbcore: registered new device driver usb

[ 3.603433] input: PC Speaker as /devices/platform/pcspkr/input/input0

[ 3.604762] libata version 3.00 loaded.

[ 3.607430] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 3.607535] ehci_hcd 0000:00:1a.7: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 3.607629] ehci_hcd 0000:00:1a.7: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.7 setup!

[ 3.607723] ehci_hcd 0000:00:1a.7: init 0000:00:1a.7 fail, -19

[ 3.607808] ehci_hcd 0000:00:1d.7: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.607900] ehci_hcd 0000:00:1d.7: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.7 setup!

[ 3.607994] ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -19

[ 3.623701] i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)

[ 3.623781] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 3.623874] ACPI Exception: AE_BAD_PARAMETER, Thread 1775910976 could not acquire Mutex [0x1] (20120711/utmutex-276)

[ 3.624093] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt

[ 3.676083] ata_piix 0000:00:1f.2: version 2.13

[ 3.676095] ata_piix 0000:00:1f.2: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.676193] ata_piix 0000:00:1f.2: MAP [

[ 3.676260] P0 P2 P1 P3 ]

[ 3.676539] ata_piix 0000:00:1f.2: setting latency timer to 64

[ 3.677344] scsi1 : ata_piix

[ 3.677732] scsi2 : ata_piix

[ 3.677862] ata1: SATA max UDMA/133 cmd 0x2118 ctl 0x212c bmdma 0x20f0

[ 3.677954] ata2: SATA max UDMA/133 cmd 0x2110 ctl 0x2128 bmdma 0x20f8

[ 3.678154] gpio_ich: GPIO from 195 to 255 on gpio_ich

[ 3.678606] ata_piix 0000:00:1f.5: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 3.678703] ata_piix 0000:00:1f.5: MAP [

[ 3.678771] P0 -- P1 -- ]

[ 3.679046] ata_piix 0000:00:1f.5: setting latency timer to 64

[ 3.679562] scsi3 : ata_piix

[ 3.680057] uhci_hcd: USB Universal Host Controller Interface driver

[ 3.682601] scsi4 : ata_piix

[ 3.682814] ata3: SATA max UDMA/133 cmd 0x2108 ctl 0x2124 bmdma 0x20d0

[ 3.682893] ata4: SATA max UDMA/133 cmd 0x2100 ctl 0x2120 bmdma 0x20d8

[ 3.683028] uhci_hcd 0000:00:1a.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.683123] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!

[ 3.683217] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19

[ 3.683300] uhci_hcd 0000:00:1a.1: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 3.683408] uhci_hcd 0000:00:1a.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.1 setup!

[ 3.683504] uhci_hcd 0000:00:1a.1: init 0000:00:1a.1 fail, -19

[ 3.683588] uhci_hcd 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq

[ 3.683682] uhci_hcd 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!

[ 3.683802] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -19

[ 3.683933] uhci_hcd 0000:00:1d.1: can't find IRQ for PCI INT B; please try using pci=biosirq

[ 3.684026] uhci_hcd 0000:00:1d.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.1 setup!

[ 3.684121] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -19

[ 3.684201] uhci_hcd 0000:00:1d.2: can't find IRQ for PCI INT C; please try using pci=biosirq

[ 3.684293] uhci_hcd 0000:00:1d.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.2 setup!

[ 3.684387] uhci_hcd 0000:00:1d.2: init 0000:00:1d.2 fail, -19

[ 3.751594] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba

[ 3.771183] iTCO_vendor_support: vendor-support=0

[ 4.010635] ata3: SATA link down (SStatus 0 SControl 300)

[ 4.022013] ata4: SATA link down (SStatus 0 SControl 300)

[ 4.342660] ata2.00: SATA link down (SStatus 0 SControl 300)

[ 4.342751] ata2.01: SATA link down (SStatus 0 SControl 300)

[ 4.487426] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 4.487519] ata1.01: SATA link down (SStatus 0 SControl 300)

[ 4.487603] ata1.01: link offline, clearing class 3 to NONE

[ 4.495491] ata1.00: ATAPI: IBM SATA DEVICE 81Y3657, IB01, max UDMA/33

[ 4.511489] ata1.00: configured for UDMA/33

[ 9.511364] ata1.00: qc timeout (cmd 0xa0)

[ 9.511434] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)

[ 10.307422] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 10.307515] ata1.01: SATA link down (SStatus 0 SControl 300)

[ 10.307600] ata1.01: link offline, clearing class 3 to NONE

[ 10.331487] ata1.00: configured for UDMA/33

[ 15.331361] ata1.00: qc timeout (cmd 0xa0)

[ 15.331431] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)

[ 15.331504] ata1.00: limiting SATA link speed to 1.5 Gbps

[ 15.331574] ata1.00: limiting speed to UDMA/33:PIO3

[ 16.127423] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

[ 16.127515] ata1.01: SATA link down (SStatus 0 SControl 300)

[ 16.127601] ata1.01: link offline, clearing class 3 to NONE

[ 16.151487] ata1.00: configured for UDMA/33

[ 21.151378] ata1.00: qc timeout (cmd 0xa0)

[ 21.151448] ata1.00: TEST_UNIT_READY failed (err_mask=0x5)

[ 21.151518] ata1.00: disabled

[ 21.151603] ata1.00: hard resetting link

[ 21.471351] ata1.01: hard resetting link

[ 21.947430] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

[ 21.947523] ata1.01: SATA link down (SStatus 0 SControl 300)

[ 21.947608] ata1.01: link offline, clearing class 3 to NONE

[ 21.947611] ata1: EH complete

[ 21.963868] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10

[ 21.963965] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x05e0)

[ 21.964124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 21.997872] Error: Driver 'pcspkr' is already registered, aborting...

[ 22.010315] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)

[ 22.995255] EXT4-fs (dm-0): re-mounted. Opts: (null)

[ 23.177611] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro

[ 23.281974] loop: module loaded

[ 23.346661] lp: driver loaded but no devices found

[ 24.043404] Adding 4194300k swap on /dev/mapper/xen-fw_swap. Priority:-1 extents:1 across:4194300k

[ 24.347072] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

[ 24.386139] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

[ 25.140294] bnx2 0000:0b:00.0: eth0: using MSIX

[ 25.140439] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 25.181911] Bridge firewalling registered

[ 25.186131] device eth1 entered promiscuous mode

[ 25.288312] bnx2 0000:0b:00.1: eth1: using MSIX

[ 25.288410] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready

[ 25.290413] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready

[ 26.898999] bnx2 0000:0b:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex

[ 26.899091]

[ 26.899222] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 28.981380] bnx2 0000:0b:00.1: eth1: NIC Copper Link is Up, 1000 Mbps full duplex

[ 28.981477]

[ 28.981613] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready

[ 28.981698] xenbr0: port 1(eth1) entered forwarding state

[ 28.981771] xenbr0: port 1(eth1) entered forwarding state

[ 28.981850] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready

[ 33.512189] RPC: Registered named UNIX socket transport module.

[ 33.512281] RPC: Registered udp transport module.

[ 33.512351] RPC: Registered tcp transport module.

[ 33.512420] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 33.533692] FS-Cache: Loaded

[ 33.547314] FS-Cache: Netfs 'nfs' registered for caching

[ 34.845026] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[ 35.475210] ppdev: user-space parallel port driver

[ 39.140866] colord-sane[2701]: segfault at 0 ip 00007fc826bc4884 sp 00007fff6a44fea0 error 4 in libc-2.13.so[7fc826b1f000+17d000]

[ 44.011341] xenbr0: port 1(eth1) entered forwarding state

[Xen-devel] Xen 4.2 with EFI on IBM x3650 ACPI Bug