Re: [Xen-devel] [PATCH 09/11] add iomem support to libxl

[George Dunlap <George.Dunlap@xxxxxxxxxxxxx>]

On Thu, Sep 27, 2012 at 6:10 PM, Matthew Fioravante
<matthew.fioravante@xxxxxxxxxx> wrote:
> This patch adds a new option for xen config files for
> directly mapping hardware io memory into a vm.
>
> Signed-off-by: Matthew Fioravante <matthew.fioravante@xxxxxxxxxx>

Looks good to me.

Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>

>
> diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
> index 013270d..428da21 100644
> --- a/docs/man/xl.cfg.pod.5
> +++ b/docs/man/xl.cfg.pod.5
> @@ -496,6 +496,17 @@ is given in hexadecimal and may either a span e.g. 
> C<2f8-2ff>
>  It is recommended to use this option only for trusted VMs under
>  administrator control.
>
> +=item B<iomem=[ "IOMEM_START,NUM_PAGES", "IOMEM_START,NUM_PAGES", ... ]>
> +
> +Allow guest to access specific hardware I/O memory pages. B<IOMEM_START>
> +is a physical page number. B<NUM_PAGES> is the number
> +of pages beginning with B<START_PAGE> to allow access. Both values
> +must be given in hexadecimal.
> +
> +It is recommended to use this option only for trusted VMs under
> +administrator control.
> +
> +
>  =item B<irqs=[ NUMBER, NUMBER, ... ]>
>
>  Allow a guest to access specific physical IRQs.
> diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
> index ef17f05..6cb586b 100644
> --- a/tools/libxl/libxl_create.c
> +++ b/tools/libxl/libxl_create.c
> @@ -963,6 +963,24 @@ static void domcreate_launch_dm(libxl__egc *egc, 
> libxl__multidev *multidev,
>          }
>      }
>
> +    for (i = 0; i < d_config->b_info.num_iomem; i++) {
> +        libxl_iomem_range *io = &d_config->b_info.iomem[i];
> +
> +        LOG(DEBUG, "dom%d iomem %"PRIx64"-%"PRIx64,
> +            domid, io->start, io->start + io->number - 1);
> +
> +        ret = xc_domain_iomem_permission(CTX->xch, domid,
> +                                          io->start, io->number, 1);
> +        if ( ret<0 ) {
> +            LOGE(ERROR,
> +                 "failed give dom%d access to iomem range %"PRIx64"-%"PRIx64,
> +                 domid, io->start, io->start + io->number - 1);
> +            ret = ERROR_FAIL;
> +        }
> +    }
> +
> +
> +
>      for (i = 0; i < d_config->num_nics; i++) {
>          /* We have to init the nic here, because we still haven't
>           * called libxl_device_nic_add at this point, but qemu needs
> diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
> index 6d5c578..cf83c60 100644
> --- a/tools/libxl/libxl_types.idl
> +++ b/tools/libxl/libxl_types.idl
> @@ -140,6 +140,11 @@ libxl_ioport_range = Struct("ioport_range", [
>      ("number", uint32),
>      ])
>
> +libxl_iomem_range = Struct("iomem_range", [
> +    ("start", uint64),
> +    ("number", uint64),
> +    ])
> +
>  libxl_vga_interface_info = Struct("vga_interface_info", [
>      ("kind",    libxl_vga_interface_type),
>      ])
> @@ -284,6 +289,7 @@ libxl_domain_build_info = Struct("domain_build_info",[
>
>      ("ioports",          Array(libxl_ioport_range, "num_ioports")),
>      ("irqs",             Array(uint32, "num_irqs")),
> +    ("iomem",            Array(libxl_iomem_range, "num_iomem")),
>
>      ("u", KeyedUnion(None, libxl_domain_type, "type",
>                  [("hvm", Struct(None, [("firmware",         string),
> diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
> index 1627cac..fe8e925 100644
> --- a/tools/libxl/xl_cmdimpl.c
> +++ b/tools/libxl/xl_cmdimpl.c
> @@ -574,8 +574,8 @@ static void parse_config_data(const char *config_source,
>      long l;
>      XLU_Config *config;
>      XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids;
> -    XLU_ConfigList *ioports, *irqs;
> -    int num_ioports, num_irqs;
> +    XLU_ConfigList *ioports, *irqs, *iomem;
> +    int num_ioports, num_irqs, num_iomem;
>      int pci_power_mgmt = 0;
>      int pci_msitranslate = 0;
>      int pci_permissive = 0;
> @@ -1005,6 +1005,30 @@ static void parse_config_data(const char 
> *config_source,
>          }
>      }
>
> +    if (!xlu_cfg_get_list(config, "iomem", &iomem, &num_iomem, 0)) {
> +        b_info->num_iomem = num_iomem;
> +        b_info->iomem = calloc(num_iomem, sizeof(*b_info->iomem));
> +        if (b_info->iomem == NULL) {
> +            fprintf(stderr, "unable to allocate memory for iomem\n");
> +            exit(-1);
> +        }
> +        for (i = 0; i < num_iomem; i++) {
> +            buf = xlu_cfg_get_listitem (iomem, i);
> +            if (!buf) {
> +                fprintf(stderr,
> +                        "xl: Unable to get element %d in iomem list\n", i);
> +                exit(1);
> +            }
> +            if(sscanf(buf, "%" SCNx64",%" SCNx64, &b_info->iomem[i].start, 
> &b_info->iomem[i].number) != 2) {
> +               fprintf(stderr,
> +                       "xl: Invalid argument parsing iomem: %s\n", buf);
> +               exit(1);
> +            }
> +        }
> +    }
> +
> +
> +
>      if (!xlu_cfg_get_list (config, "disk", &vbds, 0, 0)) {
>          d_config->num_disks = 0;
>          d_config->disks = NULL;
> --
> 1.7.9.5
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel