[Xen-devel] [PATCH xm/xl enhancements for vptm 5/6] add ioport support to libxl

[Matthew Fioravante <matthew.fioravante@xxxxxxxxxx>]

This patch adds support for mapping ioports to vms using xl, similar to
the function in xm.

Signed of by Matthew Fioravante matthew.fioravante@xxxxxxxxxx

diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -477,7 +477,7 @@ typedef struct {
     libxl_domain_create_info c_info;
     libxl_domain_build_info b_info;
 
-    int num_disks, num_vifs, num_pcidevs, num_vfbs, num_vkbs,
num_vtpms, num_iorngs, num_irqs;
+    int num_disks, num_vifs, num_pcidevs, num_vfbs, num_vkbs,
num_vtpms, num_iorngs, num_irqs, num_ioports;
 
     libxl_device_disk *disks;
     libxl_device_nic *vifs;
@@ -487,6 +487,7 @@ typedef struct {
     libxl_device_vtpm *vtpms;
     libxl_iomem_range *iorngs;
     libxl_irq         *irqs;
+    libxl_ioport_range *ioports;
 
     libxl_action_on_shutdown on_poweroff;
     libxl_action_on_shutdown on_reboot;
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -66,6 +66,10 @@ void libxl_domain_config_dispose(libxl_domain_config
*d_config)
        libxl_irq_dispose(&d_config->irqs[i]);
     free(d_config->irqs);
 
+    for (i=0; i<d_config->num_ioports; i++)
+       libxl_ioport_range_dispose(&d_config->ioports[i]);
+    free(d_config->ioports);
+
     libxl_domain_create_info_dispose(&d_config->c_info);
     libxl_domain_build_info_dispose(&d_config->b_info);
 }
@@ -744,6 +748,16 @@ static void domcreate_bootloader_done(libxl__egc *egc,
             goto error_out;
         }
     }
+    for (i = 0; i < d_config->num_ioports; i++) {
+       printf("PORT %d %d %d\n", d_config->ioports[i].start,
d_config->ioports[i].nr_ports, d_config->ioports[i].allow);
+        ret = xc_domain_ioport_permission(ctx->xch, domid,
d_config->ioports[i].start, d_config->ioports[i].nr_ports,
d_config->ioports[i].allow);
+        if (ret) {
+            LIBXL__LOG(ctx, LIBXL__LOG_ERROR,
+                       "cannot add ioport %d to domain: %d", i, ret);
+            ret = ERROR_FAIL;
+            goto error_out;
+        }
+    }
     for (i = 0; i < d_config->num_disks; i++) {
         ret = libxl_device_disk_add(ctx, domid, &d_config->disks[i]);
         if (ret) {
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -328,6 +328,13 @@ libxl_irq = Struct("irq", [
     ("allow", bool),
 ])
 
+libxl_ioport_range = Struct("ioport_range", [
+    ("start", uint32),
+    ("nr_ports", uint32),
+    ("allow", bool),
+]);
+
+
 libxl_device_vfb = Struct("device_vfb", [
     ("backend_domid", libxl_domid),
     ("devid",         libxl_devid),
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -560,7 +560,7 @@ static void parse_config_data(const char *config_source,
     const char *buf;
     long l;
     XLU_Config *config;
-    XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms,
*iomems, *irqs;
+    XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms,
*iomems, *irqs, *ioports;
     int pci_power_mgmt = 0;
     int pci_msitranslate = 1;
     int pci_permissive = 0;
@@ -1214,6 +1214,44 @@ skip_vfb:
        }
     }
 
+    if(!xlu_cfg_get_list(config, "ioport", &ioports, 0, 0)) {
+       int i;
+       for(i =0; (buf = xlu_cfg_get_listitem(ioports, i)) != NULL; ++i) {
+          libxl_ioport_range* ioport;
+          char* buf2 = strdup(buf);
+          char *st, *len, *al;
+
+          d_config->ioports = realloc(d_config->ioports,
sizeof(libxl_ioport_range) * (d_config->num_ioports + 1));
+          ioport = d_config->ioports + d_config->num_ioports;
+
+          libxl_ioport_range_init(ioport);
+
+          st = strtok(buf2, ",");
+          len = strtok(NULL, ",");
+          al = strtok(NULL, ",");
+
+          if(st == NULL || len == NULL ||
+                sscanf(st, "%" PRIu32, &ioport->start) != 1 ||
+                sscanf(len, "%" PRIu32, &ioport->nr_ports) != 1 ||
+                (al != NULL && ((al[0] != '1' && al[0] != '0') || al[1]
!= '\0'))
+            ) {
+             fprintf(stderr, "Malformed ioport specification!\n");
+             free(buf2);
+             exit(1);
+          }
+          if(al != NULL) {
+             ioport->allow = al[0] - '0';
+          } else {
+             ioport->allow = 1;
+          }
+
+          free(buf2);
+          d_config->num_ioports++;
+       }
+    }
+
+
+
     switch (xlu_cfg_get_list(config, "cpuid", &cpuids, 0, 1)) {
     case 0:
         {

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel