Re: [Xen-devel] Was: Re: [GIT PULL] timer changes for v3.6, Is: Regression introduced by 1e75fa8be9fb61e1af46b5b3b176347a4c958ca1

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

On Mon, Jul 23, 2012 at 10:41:49AM -0700, John Stultz wrote:
> On 07/23/2012 07:49 AM, Konrad Rzeszutek Wilk wrote:
> >I hadn't looked in details of the patch, but this commit:
> >
> >commit 1e75fa8be9fb61e1af46b5b3b176347a4c958ca1
> >Author: John Stultz <john.stultz@xxxxxxxxxx>
> >Date:   Fri Jul 13 01:21:53 2012 -0400
> >
> >     time: Condense timekeeper.xtime into xtime_sec
> >
> >causes 32-bit (and only 32-bit) bootup time crashes on Xen guests. I couldn't
> >do a git revert on top of Linus's tree (had a bunch of conflicts), but with
> >git bisection it narrowed down to that patch.
> >
> >I could also bootup with git commit 55acdddbac1725b80df0c41970505e8a41c84956
> >(the smp-hotplug-for-linus merge), but with git commit
> >3992c0321258bdff3666cbaf5225f538ad61a548 (timers-core-for-linus merge aka 
> >this pull)
> >it went belly up.
> >
> >This is the guest config:
> >
> >extra="console=hvc0 debug earlyprintk=xen memblock=debug"
> >kernel="/mnt/lab/bootstrap-i386/vmlinuz"
> >ramdisk="/mnt/lab/bootstrap-i386/initramfs.cpio.gz"
> >mem=10248
> >vcpus=1
> >name="bootstrap-i386"
> >on_crash="preserve"
> >
> >Attached is the crash log and I am also attaching the .config file and 
> >bisect log.
> >
> >John, any thoughts? Is Xen clock timer (arch/x86/xen/time.c) code missing 
> >something obvious?
> 
> Thanks for the testing and the report!  I'll take a closer look here
> and see.
> 
> >Using config file "/test.xm".
> >Started domain bootstrap-i386 (id=4)
> >[    0.000000] console [hvc0] enabled, bootconsole disabled
> >[    0.000000] Xen: using vcpuop timer interface
> >[    0.000000] installing Xen timer for CPU 0
> >[    0.000000] ------------[ cut here ]------------
> >[    0.000000] WARNING: at /home/konrad/linux/kernel/time/clockevents.c:209 
> >clockevents_program_event+0x176/0x190()
> >[    0.000000] Modules linked in:
> >[    0.000000] Pid: 0, comm: swapper/0 Not tainted 
> >3.5.0upstream-00242-g3992c03 #1
> >[    0.000000] Call Trace:
> >[    0.000000]  [<c1067aed>] warn_slowpath_common+0x6d/0xa0
> >[    0.000000]  [<c10aa846>] ? clockevents_program_event+0x176/0x190
> >[    0.000000]  [<c10aa846>] ? clockevents_program_event+0x176/0x190
> >[    0.000000]  [<c1067b3d>] warn_slowpath_null+0x1d/0x20
> >[    0.000000]  [<c10aa846>] clockevents_program_event+0x176/0x190
> >[    0.000000]  [<c10aaa36>] tick_setup_periodic+0x66/0xa0
> >[    0.000000]  [<c10aade7>] tick_notify+0x377/0x3d0
> >[    0.000000]  [<c1511043>] notifier_call_chain+0x43/0x60
> >[    0.000000]  [<c108985a>] raw_notifier_call_chain+0x1a/0x20
> >[    0.000000]  [<c10aa1f8>] clockevents_register_device+0x88/0xf0
> >[    0.000000]  [<c102fb12>] xen_setup_cpu_clockevents+0x22/0x40
> >[    0.000000]  [<c16bba3a>] xen_time_init+0xb7/0xbf
> >[    0.000000]  [<c16bcf1c>] x86_late_time_init+0x9/0x10
> >[    0.000000]  [<c16b7a7f>] start_kernel+0x286/0x317
> >[    0.000000]  [<c16b766a>] ? kernel_init+0x1cd/0x1cd
> >[    0.000000]  [<c16b72e6>] i386_start_kernel+0xa9/0xb0
> >[    0.000000]  [<c16ba609>] xen_start_kernel+0x5c9/0x5d1
> 
> Is this WARN_ON new, as well as the oops?

Yes. I don't see the WARN_ON if I boot the kernel with one git commit
earlier (fee84c43e6afc42295ae8058cbbef9ea5633926c] time: Explicitly use u32 
instead of int for shift values).

I do see all the time this WARN_ON and the crash (and also the huge jump in
time reported), when building with git commit 
1e75fa8be9fb61e1af46b5b3b176347a4c958ca1] time: Condense timekeeper.xtime into 
xtime_sec):

[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.000000] Detected 2899.988 MHz processor.
[1266874889.140126] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 5799.97 BogoMIPS (lpj=2899988)
[1266874889.140126] pid_max: default: 32768 minimum: 301

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel