Re: [Xen-devel] [PATCH] xen/xenbus: Add quirk to deal with misconfigured backends.

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

On Thu, Apr 19, 2012 at 12:37:42PM +0100, Stefano Stabellini wrote:
> On Wed, 18 Apr 2012, Konrad Rzeszutek Wilk wrote:
> > From: konrad <konrad@xxxxxxxxxxxxxxxxxxxxx>
> 
> wrong email address

Yeah :-)
> 
> 
> > A rather annoying and common case is when booting a PVonHVM guest
> > and exposing the PV KBD and PV VFB - as both of those do not
> > make any sense.
> 
> I would rather write: "as broken toolstacks don't always initialize the
> backends correctly."

OK.
> 
> 
> > The HVM guest is using the VGA driver and the emulated
> > keyboard for this. So we provide a very basic quirk framework
> > (can be expanded in the future) to not wait for 6 minutes for those devices
> > to initialize - they never wont.
> > 
> > To trigger this, put this in your guest config:
> > 
> > vfb = [ 'vnc=1, vnclisten=0.0.0.0 ,vncunused=1']
> > 
> > instead of this:
> > vnc=1
> > vnclisten="0.0.0.0"
> > 
> > [v3: Split delay in non-essential (30 seconds) and essential
> >  devices per Ian and Stefano suggestion]
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>quirk
> > ---
> >  drivers/xen/xenbus/xenbus_probe_frontend.c |   69 
> > +++++++++++++++++++++------
> >  1 files changed, 53 insertions(+), 16 deletions(-)
> > 
> > diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c 
> > b/drivers/xen/xenbus/xenbus_probe_frontend.c
> > index f20c5f1..7422913 100644
> > --- a/drivers/xen/xenbus/xenbus_probe_frontend.c
> > +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
> > @@ -135,7 +135,7 @@ static int read_backend_details(struct xenbus_device 
> > *xendev)
> >     return xenbus_read_otherend_details(xendev, "backend-id", "backend");
> >  }
> >  
> > -static int is_device_connecting(struct device *dev, void *data)
> > +static int is_device_connecting(struct device *dev, void *data, bool 
> > ignore_vkbd)
> >  {
> >     struct xenbus_device *xendev = to_xenbus_device(dev);
> >     struct device_driver *drv = data;
> > @@ -152,16 +152,41 @@ static int is_device_connecting(struct device *dev, 
> > void *data)
> >     if (drv && (dev->driver != drv))
> >             return 0;
> >  
> > +   if (ignore_vkbd) {
> 
> I would name the parameter ignore_nonessential, just to make it clearer
> that is not just about vkbd

OK.
> 
> 
> > +           /* With older QEMU, for PVonHVM guests the guest config files
> > +            * could contain: vfb = [ 'vnc=1, vnclisten=0.0.0.0']
> > +            * which is nonsensical as there is no PV FB (there can be
> > +            * a PVKB) running as HVM guest. */
> > +
> > +           if ((strncmp(xendev->nodename, "device/vkbd", 11) == 0))
> > +                   return 0;
> > +
> > +           if ((strncmp(xendev->nodename, "device/vfb", 10) == 0))
> > +                   return 0;
> > +   }
> >     xendrv = to_xenbus_driver(dev->driver);
> >     return (xendev->state < XenbusStateConnected ||
> >             (xendev->state == XenbusStateConnected &&
> >              xendrv->is_ready && !xendrv->is_ready(xendev)));
> >  }
> > +static int essential_device_connecting(struct device *dev, void *data)
> > +{
> > +   return is_device_connecting(dev, data, true /* ignore PVKB+PVDB */);
> > +}
> 
> the comment is wrong

Oh, PVKBD + PVFB. Right.

> 
> 
> > +static int non_essential_device_connecting(struct device *dev, void *data)
> > +{
> > +   return is_device_connecting(dev, data, false);
> > +}
> >  
> > -static int exists_connecting_device(struct device_driver *drv)
> > +static int exists_essential_connecting_device(struct device_driver *drv)
> >  {
> >     return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
> > -                           is_device_connecting);
> > +                           essential_device_connecting);
> > +}
> > +static int exists_non_essential_connecting_device(struct device_driver 
> > *drv)
> > +{
> > +   return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
> > +                           non_essential_device_connecting);
> >  }
> >  
> >  static int print_device_status(struct device *dev, void *data)
> > @@ -192,6 +217,23 @@ static int print_device_status(struct device *dev, 
> > void *data)
> >  /* We only wait for device setup after most initcalls have run. */
> >  static int ready_to_wait_for_devices;
> >  
> > +static bool wait_loop(unsigned long start, unsigned int max_delay,
> > +                unsigned int *seconds_waited)
> > +{
> > +   if (time_after(jiffies, start + (*seconds_waited+5)*HZ)) {
> > +           if (!*seconds_waited)
> > +                   printk(KERN_WARNING "XENBUS: Waiting for "
> > +                          "devices to initialise: ");
> > +           *seconds_waited += 5;
> > +           printk("%us...", max_delay - *seconds_waited);
> > +           if (*seconds_waited == max_delay)
> > +                   return true;
> > +   }
> > +
> > +   schedule_timeout_interruptible(HZ/10);
> > +
> > +   return false;
> > +}
> >  /*
> >   * On a 5-minute timeout, wait for all devices currently configured.  We 
> > need
> >   * to do this to guarantee that the filesystems and / or network devices
> > @@ -215,19 +257,14 @@ static void wait_for_devices(struct xenbus_driver 
> > *xendrv)
> >     if (!ready_to_wait_for_devices || !xen_domain())
> >             return;
> >  
> > -   while (exists_connecting_device(drv)) {
> > -           if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
> > -                   if (!seconds_waited)
> > -                           printk(KERN_WARNING "XENBUS: Waiting for "
> > -                                  "devices to initialise: ");
> > -                   seconds_waited += 5;
> > -                   printk("%us...", 300 - seconds_waited);
> > -                   if (seconds_waited == 300)
> > -                           break;
> > -           }
> > -
> > -           schedule_timeout_interruptible(HZ/10);
> > -   }
> > +   while (exists_non_essential_connecting_device(drv))
> > +           if (wait_loop(start, 30, &seconds_waited))
> > +                   break;
> > +
> > +   /* Skips PVKB and PVFB check.*/
> > +   while (exists_essential_connecting_device(drv))
> > +           if (wait_loop(start, 270, &seconds_waited))
> > +                   break;
> >  
> >     if (seconds_waited)
> >             printk("\n");
> > -- 
> > 1.7.7.5
> > 
> 
> Other than the comments I wrote above, I think the patch is good

Sweet. thx!

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel