[ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.9 (root@dt29) (gcc version 4.4.5 (Debian 4.4.5-8) ) #9 SMP Mon Mar 12 03:35:38 UTC 2012 [ 0.000000] Freeing 9e-100 pfn range: 98 pages freed [ 0.000000] 1-1 mapping on 9e->100 [ 0.000000] 1-1 mapping on bf699->100000 [ 0.000000] Released 98 pages of unused memory [ 0.000000] Set 264649 page(s) to 1-1 mapping [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000bf699000 (usable) [ 0.000000] Xen: 00000000bf699000 - 00000000bf6af000 (reserved) [ 0.000000] Xen: 00000000bf6af000 - 00000000bf6ce000 (ACPI data) [ 0.000000] Xen: 00000000bf6ce000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Dell Inc. PowerEdge R310/05XKKK, BIOS 1.1.5 05/24/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x1000000 [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] initial memory mapped : 0 - 06bff000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-000000002cdfe000 [ 0.000000] 0000000000 - 002cdfe000 page 4k [ 0.000000] kernel direct mapping tables up to 2cdfe000 @ 6a92000-6bff000 [ 0.000000] xen: setting RW the range 6bc6000 - 6bff000 [ 0.000000] RAMDISK: 019f1000 - 05fe4000 [ 0.000000] ACPI: RSDP 000f0aa0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000f0ba0 0008C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP bf6c3bb4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT bf6af000 03E43 (v01 DELL PE_SC3 00000001 INTL 20050624) [ 0.000000] ACPI: FACS bf6c6000 00040 [ 0.000000] ACPI: APIC bf6c3478 00152 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR bf6c35cc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET bf6c3620 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: XMAR bf6c365c 000A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG bf6c3850 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: WD__ bf6c3890 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SLIC bf6c39c8 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: ERST bf6b2fc4 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HEST bf6b3234 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: BERT bf6b2e44 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: EINJ bf6b2e74 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: TCPA bf6c3b4c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] node 0 pfn: [0 - 240000] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da23 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da24 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da25 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da26 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da27 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da28 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da29 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da2a ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da2b ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da2c ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da2d ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da2e ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da2f ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da30 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da31 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da32 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da33 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da34 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da35 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da36 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da37 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da38 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da39 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da3a ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da3b ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da3c ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da3d ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da3e ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da3f ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da40 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da41 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da42 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da43 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da44 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da45 ]--- [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/xen/multicalls.c:129 xen_mc_issue+0x34/0x62() [ 0.000000] Hardware name: PowerEdge R310 [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Tainted: G W 3.2.9 #9 [ 0.000000] Call Trace: [ 0.000000] [] ? warn_slowpath_common+0x6a/0x7b [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? warn_slowpath_null+0xd/0x10 [ 0.000000] [] ? xen_mc_issue+0x34/0x62 [ 0.000000] [] ? xen_set_pmd_hyper+0x3c/0x42 [ 0.000000] [] ? set_pmd_pfn+0xde/0xf9 [ 0.000000] [] ? init_alloc_remap+0x1b3/0x216 [ 0.000000] [] ? setup_node_data+0x4c/0x22f [ 0.000000] [] ? T.744+0x290/0x2c2 [ 0.000000] [] ? T.743+0x77/0x1a1 [ 0.000000] [] ? default_get_apic_id+0x14/0x33 [ 0.000000] [] ? initmem_init+0x5/0xb7 [ 0.000000] [] ? setup_arch+0x5bf/0x694 [ 0.000000] [] ? __spin_time_accum+0x26/0x36 [ 0.000000] [] ? start_kernel+0x81/0x34d [ 0.000000] [] ? xen_start_kernel+0x554/0x55b [ 0.000000] ---[ end trace 4eaa2a86a8e2da46 ]--- [ 0.000000] remap_alloc: node 0 [3b600000-40000000) -> [e8200000-ecc00000) [ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [0000000028200000 - 0000000028201fff] (remapped) [ 0.000000] 8498MB HIGHMEM available. [ 0.000000] 717MB LOWMEM available. [ 0.000000] max_low_pfn = 2cdfe, highstart_pfn = 2cdfe [ 0.000000] Low memory ends at vaddr ecdfe000 [ 0.000000] High memory starts at vaddr ecdfe000 [ 0.000000] mapped low ram: 0 - 2cdfe000 [ 0.000000] low ram: 0 - 2cdfe000 [ 0.000000] Node: 0, start_pfn: 10, end_pfn: 9e [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 10 [ 0.000000] Node: 0, start_pfn: 100, end_pfn: bf699 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 80100 84100 88100 8c100 90100 94100 98100 9c100 a0100 a4100 a8100 ac100 b0100 b4100 b8100 bc100 [ 0.000000] Node: 0, start_pfn: 100000, end_pfn: 240000 [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 150000 154000 158000 15c000 160000 164000 168000 16c000 170000 174000 178000 17c000 180000 184000 188000 18c000 190000 194000 198000 19c000 1a0000 1a4000 1a8000 1ac000 1b0000 1b4000 1b8000 1bc000 1c0000 1c4000 1c8000 1cc000 1d0000 1d4000 1d8000 1dc000 1e0000 1e4000 1e8000 1ec000 1f0000 1f4000 1f8000 1fc000 200000 204000 208000 20c000 210000 214000 218000 21c000 220000 224000 228000 22c000 230000 234000 238000 23c000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002cdfe [ 0.000000] HighMem 0x0002cdfe -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf699 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2094631 [ 0.000000] free_area_init_node: node 0, pgdat e8200000, node_mem_map e8202200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1404 pages used for memmap [ 0.000000] Normal zone: 178306 pages, LIFO batch:31 [ 0.000000] HighMem zone: 16997 pages used for memmap [ 0.000000] HighMem zone: 1893942 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0 already used, trying 8 [ 0.000000] IOAPIC[0]: apic_id 8, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.2-unstable (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @ecc4b000 s31360 r0 d21888 u53248 [ 0.000000] pcpu-alloc: s31360 r0 d21888 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 4.732820] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2076198 [ 4.732826] Policy zone: HighMem [ 4.732834] Kernel command line: placeholder root=/dev/sda1 ro console=tty0 console=hvc0 earlyprintk=xen [ 4.732905] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 4.732965] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 4.733144] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 4.733365] Initializing CPU#0 [ 4.761515] Placing 64MB software IO TLB between e4180000 - e8180000 [ 4.761523] software IO TLB at phys 0x24180000 - 0x28180000 [ 4.782093] Initializing HighMem for node 0 (0002cdfe:00240000) [ 4.823430] Memory: 746252k/9437184k available (3913k kernel code, 226092k reserved, 2707k data, 436k init, 237576k highmem) [ 4.823440] virtual kernel memory layout: [ 4.823441] fixmap : 0xf5296000 - 0xf57ff000 (5540 kB) [ 4.823442] pkmap : 0xf4e00000 - 0xf5000000 (2048 kB) [ 4.823443] vmalloc : 0xed5fe000 - 0xf4dfe000 ( 120 MB) [ 4.823444] lowmem : 0xc0000000 - 0xecdfe000 ( 717 MB) [ 4.823445] .init : 0xc1678000 - 0xc16e5000 ( 436 kB) [ 4.823446] .data : 0xc13d2478 - 0xc1677380 (2707 kB) [ 4.823447] .text : 0xc1000000 - 0xc13d2478 (3913 kB) [ 4.823565] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 4.823647] Hierarchical RCU implementation. [ 4.823674] NR_IRQS:2304 nr_irqs:2304 16 [ 4.823751] CPU 0 irqstacks, hard=e3c0c000 soft=e3c0e000 [ 4.823757] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 4.823763] xen: registering gsi 9 triggering 0 polarity 0 [ 4.823781] xen: --> pirq=9 -> irq=9 (gsi=9) [ 4.823790] xen: acpi sci 9 [ 4.823802] xen: --> pirq=1 -> irq=1 (gsi=1) [ 4.823813] xen: --> pirq=2 -> irq=2 (gsi=2) [ 4.823823] xen: --> pirq=3 -> irq=3 (gsi=3) [ 4.823834] xen: --> pirq=4 -> irq=4 (gsi=4) [ 4.823844] xen: --> pirq=5 -> irq=5 (gsi=5) [ 4.823855] xen: --> pirq=6 -> irq=6 (gsi=6) [ 4.823866] xen: --> pirq=7 -> irq=7 (gsi=7) [ 4.823876] xen: --> pirq=8 -> irq=8 (gsi=8) [ 4.823882] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 4.823889] xen: --> pirq=9 -> irq=9 (gsi=9) [ 4.823899] xen: --> pirq=10 -> irq=10 (gsi=10) [ 4.823910] xen: --> pirq=11 -> irq=11 (gsi=11) [ 4.823920] xen: --> pirq=12 -> irq=12 (gsi=12) [ 4.823931] xen: --> pirq=13 -> irq=13 (gsi=13) [ 4.823941] xen: --> pirq=14 -> irq=14 (gsi=14) [ 4.823952] xen: --> pirq=15 -> irq=15 (gsi=15) [ 4.830565] Console: colour VGA+ 80x25 [ 5.108714] console [tty0] enabled [ 5.108965] console [hvc0] enabled, bootconsole disabled [ 5.109275] Xen: using vcpuop timer interface [ 5.109283] installing Xen timer for CPU 0 [ 5.109564] Detected 2660.076 MHz processor. [ 5.109817] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.15 BogoMIPS (lpj=10640304) [ 5.110315] pid_max: default: 32768 minimum: 301 [ 5.110636] Mount-cache hash table entries: 512 [ 5.111178] Initializing cgroup subsys cpuacct [ 5.111435] Initializing cgroup subsys devices [ 5.111682] Initializing cgroup subsys freezer [ 5.112015] CPU: Physical Processor ID: 0 [ 5.112263] CPU: Processor Core ID: 0 [ 5.115463] ACPI: Core revision 20110623 [ 5.118959] cpu 0 spinlock event irq 273 [ 5.119307] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only. [ 5.120054] NMI watchdog disabled (cpu0): hardware events not enabled [ 5.120473] CPU 1 irqstacks, hard=e3cb0000 soft=e3cb2000 [ 5.120479] installing Xen timer for CPU 1 [ 5.120754] cpu 1 spinlock event irq 279 [ 5.121079] Initializing CPU#1 [ 5.121178] NMI watchdog disabled (cpu1): hardware events not enabled [ 5.121844] CPU 2 irqstacks, hard=e3cbe000 soft=e3cc0000 [ 5.121849] installing Xen timer for CPU 2 [ 5.122125] cpu 2 spinlock event irq 285 [ 5.122444] Initializing CPU#2 [ 5.122514] NMI watchdog disabled (cpu2): hardware events not enabled [ 5.123166] CPU 3 irqstacks, hard=e3cca000 soft=e3ccc000 [ 5.123171] installing Xen timer for CPU 3 [ 5.123448] cpu 3 spinlock event irq 291 [ 5.123761] Initializing CPU#3 [ 5.123828] NMI watchdog disabled (cpu3): hardware events not enabled [ 5.124483] CPU 4 irqstacks, hard=e3cfe000 soft=e3d00000 [ 5.124488] installing Xen timer for CPU 4 [ 5.124759] cpu 4 spinlock event irq 297 [ 5.125074] Initializing CPU#4 [ 5.125145] NMI watchdog disabled (cpu4): hardware events not enabled [ 5.125800] CPU 5 irqstacks, hard=e3d1a000 soft=e3d1c000 [ 5.125805] installing Xen timer for CPU 5 [ 5.126077] cpu 5 spinlock event irq 303 [ 5.126393] Initializing CPU#5 [ 5.126461] NMI watchdog disabled (cpu5): hardware events not enabled [ 5.127081] CPU 6 irqstacks, hard=e3d28000 soft=e3d2a000 [ 5.127086] installing Xen timer for CPU 6 [ 5.127390] cpu 6 spinlock event irq 309 [ 5.127709] Initializing CPU#6 [ 5.127781] NMI watchdog disabled (cpu6): hardware events not enabled [ 5.128398] CPU 7 irqstacks, hard=e3d36000 soft=e3d38000 [ 5.128404] installing Xen timer for CPU 7 [ 5.128711] cpu 7 spinlock event irq 315 [ 5.129029] Initializing CPU#7 [ 5.129096] NMI watchdog disabled (cpu7): hardware events not enabled [ 5.129617] Brought up 8 CPUs [ 5.130587] devtmpfs: initialized [ 5.132137] Grant table initialized [ 5.132434] NET: Registered protocol family 16 [ 5.133100] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 5.133562] ACPI: bus type pci registered [ 5.133961] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 5.134458] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 5.139876] PCI: Using MMCONFIG for extended config space [ 5.140123] PCI: Using configuration type 1 for base access [ 5.142866] bio: create slab at 0 [ 5.143252] ACPI: Added _OSI(Module Device) [ 5.143509] ACPI: Added _OSI(Processor Device) [ 5.143788] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.144037] ACPI: Added _OSI(Processor Aggregator Device) [ 5.147207] ACPI: EC: Look up EC in DSDT [ 5.150942] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 5.152400] ACPI: Interpreter enabled [ 5.152655] ACPI: (supports S0 S4 S5) [ 5.153029] ACPI: Using IOAPIC for interrupt routing [ 5.162821] ACPI: No dock devices found. [ 5.163075] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 5.163927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 5.164567] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 5.164823] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 5.165077] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 5.165538] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfdffffff] [ 5.166024] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 5.166509] pci 0000:00:00.0: [8086:d130] type 0 class 0x000600 [ 5.166681] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 5.166693] pci 0000:00:00.0: PME# disabled [ 5.166769] pci 0000:00:03.0: [8086:d138] type 1 class 0x000604 [ 5.166956] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 5.166967] pci 0000:00:03.0: PME# disabled [ 5.167039] pci 0000:00:05.0: [8086:d13a] type 1 class 0x000604 [ 5.167226] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 5.167236] pci 0000:00:05.0: PME# disabled [ 5.167302] pci 0000:00:08.0: [8086:d155] type 0 class 0x000880 [ 5.167544] pci 0000:00:08.1: [8086:d156] type 0 class 0x000880 [ 5.167760] pci 0000:00:08.2: [8086:d157] type 0 class 0x000880 [ 5.167964] pci 0000:00:08.3: [8086:d158] type 0 class 0x000880 [ 5.168148] pci 0000:00:10.0: [8086:d150] type 0 class 0x000880 [ 5.168312] pci 0000:00:10.1: [8086:d151] type 0 class 0x000880 [ 5.168531] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 5.168584] pci 0000:00:1a.0: reg 10: [mem 0xdf0fc000-0xdf0fc3ff] [ 5.168846] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 5.168858] pci 0000:00:1a.0: PME# disabled [ 5.168911] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 5.169113] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.169124] pci 0000:00:1c.0: PME# disabled [ 5.169189] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604 [ 5.169389] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.169401] pci 0000:00:1c.4: PME# disabled [ 5.169476] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 5.169529] pci 0000:00:1d.0: reg 10: [mem 0xdf0fe000-0xdf0fe3ff] [ 5.169763] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 5.169775] pci 0000:00:1d.0: PME# disabled [ 5.169825] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 5.169999] pci 0000:00:1f.0: [8086:3b14] type 0 class 0x000601 [ 5.170308] pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101 [ 5.170352] pci 0000:00:1f.2: reg 10: [io 0xeca0-0xeca7] [ 5.170376] pci 0000:00:1f.2: reg 14: [io 0xec90-0xec93] [ 5.170399] pci 0000:00:1f.2: reg 18: [io 0xeca8-0xecaf] [ 5.170422] pci 0000:00:1f.2: reg 1c: [io 0xec94-0xec97] [ 5.170445] pci 0000:00:1f.2: reg 20: [io 0xecc0-0xeccf] [ 5.170468] pci 0000:00:1f.2: reg 24: [io 0xecd0-0xecdf] [ 5.170619] pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101 [ 5.170663] pci 0000:00:1f.5: reg 10: [io 0xecb0-0xecb7] [ 5.170686] pci 0000:00:1f.5: reg 14: [io 0xec98-0xec9b] [ 5.170709] pci 0000:00:1f.5: reg 18: [io 0xecb8-0xecbf] [ 5.170732] pci 0000:00:1f.5: reg 1c: [io 0xec9c-0xec9f] [ 5.170755] pci 0000:00:1f.5: reg 20: [io 0xece0-0xecef] [ 5.170778] pci 0000:00:1f.5: reg 24: [io 0xecf0-0xecff] [ 5.171009] pci 0000:00:03.0: PCI bridge to [bus 04-04] [ 5.171386] pci 0000:00:05.0: PCI bridge to [bus 05-05] [ 5.171815] pci 0000:03:00.0: [1000:0058] type 0 class 0x000100 [ 5.171851] pci 0000:03:00.0: reg 10: [io 0xfc00-0xfcff] [ 5.171887] pci 0000:03:00.0: reg 14: [mem 0xdf2ec000-0xdf2effff 64bit] [ 5.171922] pci 0000:03:00.0: reg 1c: [mem 0xdf2f0000-0xdf2fffff 64bit] [ 5.171966] pci 0000:03:00.0: reg 30: [mem 0xdf100000-0xdf1fffff pref] [ 5.172094] pci 0000:03:00.0: supports D1 D2 [ 5.172139] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 5.172623] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 5.172915] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 5.172925] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf2fffff] [ 5.173095] pci 0000:02:00.0: [14e4:163b] type 0 class 0x000200 [ 5.173147] pci 0000:02:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit] [ 5.173414] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 5.173427] pci 0000:02:00.0: PME# disabled [ 5.173526] pci 0000:02:00.1: [14e4:163b] type 0 class 0x000200 [ 5.173577] pci 0000:02:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit] [ 5.173843] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 5.173855] pci 0000:02:00.1: PME# disabled [ 5.173969] pci 0000:00:1c.4: PCI bridge to [bus 02-02] [ 5.174230] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xddffffff] [ 5.174359] pci 0000:01:03.0: [102b:0532] type 0 class 0x000300 [ 5.174402] pci 0000:01:03.0: reg 10: [mem 0xd9800000-0xd9ffffff pref] [ 5.174427] pci 0000:01:03.0: reg 14: [mem 0xde7fc000-0xde7fffff] [ 5.174452] pci 0000:01:03.0: reg 18: [mem 0xde800000-0xdeffffff] [ 5.174536] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 5.174699] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 5.174964] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] [ 5.174980] pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff 64bit pref] [ 5.174985] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 5.174990] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 5.174996] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 5.175001] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfdffffff] (subtractive decode) [ 5.175007] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 5.175068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 5.175397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LYD0._PRT] [ 5.175482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LYD2._PRT] [ 5.175581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 5.175710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 5.175818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] [ 5.176044] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 5.176608] pci0000:00: ACPI _OSC control (0x1d) granted [ 5.185430] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) [ 5.186161] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 *5 6 7 10 11 14 15) [ 5.186925] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 5.187934] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15) [ 5.188696] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 *11 14 15) [ 5.189437] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 *10 11 14 15) [ 5.190201] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 *14 15) [ 5.190957] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 5.191939] xen/balloon: Initialising balloon driver. [ 5.209499] xen-balloon: Initialising balloon driver. [ 5.209963] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none [ 5.210450] vgaarb: loaded [ 5.210691] vgaarb: bridge control possible 0000:01:03.0 [ 5.211040] usbcore: registered new interface driver usbfs [ 5.211320] usbcore: registered new interface driver hub [ 5.211650] usbcore: registered new device driver usb [ 5.212005] PCI: Using ACPI for IRQ routing [ 5.227040] PCI: Discovered peer bus ff [ 5.227366] pci 0000:ff:00.0: [8086:2c50] type 0 class 0x000600 [ 5.227477] pci 0000:ff:00.1: [8086:2c81] type 0 class 0x000600 [ 5.227590] pci 0000:ff:02.0: [8086:2c90] type 0 class 0x000600 [ 5.227689] pci 0000:ff:02.1: [8086:2c91] type 0 class 0x000600 [ 5.227799] pci 0000:ff:03.0: [8086:2c98] type 0 class 0x000600 [ 5.227898] pci 0000:ff:03.1: [8086:2c99] type 0 class 0x000600 [ 5.227996] pci 0000:ff:03.2: [8086:2c9a] type 0 class 0x000600 [ 5.228096] pci 0000:ff:03.4: [8086:2c9c] type 0 class 0x000600 [ 5.228203] pci 0000:ff:04.0: [8086:2ca0] type 0 class 0x000600 [ 5.228302] pci 0000:ff:04.1: [8086:2ca1] type 0 class 0x000600 [ 5.228429] pci 0000:ff:04.2: [8086:2ca2] type 0 class 0x000600 [ 5.228527] pci 0000:ff:04.3: [8086:2ca3] type 0 class 0x000600 [ 5.228634] pci 0000:ff:05.0: [8086:2ca8] type 0 class 0x000600 [ 5.228732] pci 0000:ff:05.1: [8086:2ca9] type 0 class 0x000600 [ 5.228830] pci 0000:ff:05.2: [8086:2caa] type 0 class 0x000600 [ 5.228928] pci 0000:ff:05.3: [8086:2cab] type 0 class 0x000600 [ 5.230230] PCI: pci_cache_line_size set to 64 bytes [ 5.230530] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 5.230536] reserve RAM buffer: 00000000bf699000 - 00000000bfffffff [ 5.230919] Switching to clocksource xen [ 5.238529] pnp: PnP ACPI init [ 5.238800] ACPI: bus type pnp registered [ 5.239234] pnp 00:00: [bus 00-ff] [ 5.239239] pnp 00:00: [io 0x0cf8-0x0cff] [ 5.239244] pnp 00:00: [io 0x0000-0x0cf7 window] [ 5.239249] pnp 00:00: [io 0x0d00-0xffff window] [ 5.239254] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 5.239259] pnp 00:00: [mem 0xc0000000-0xfdffffff window] [ 5.239264] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 5.239472] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 5.239606] pnp 00:01: [io 0x0080-0x009f] [ 5.239611] pnp 00:01: [io 0x0000-0x001f] [ 5.239616] pnp 00:01: [io 0x00c0-0x00df] [ 5.239621] pnp 00:01: [dma 4] [ 5.239747] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 5.239786] pnp 00:02: [io 0x00f0-0x00ff] [ 5.239792] xen: registering gsi 13 triggering 1 polarity 0 [ 5.239801] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 5.240049] xen: --> pirq=13 -> irq=13 (gsi=13) [ 5.240059] pnp 00:02: [irq 13] [ 5.240190] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) [ 5.240237] pnp 00:03: [io 0x0061] [ 5.240449] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.240493] pnp 00:04: [io 0x0070-0x007f] [ 5.240498] xen: registering gsi 8 triggering 1 polarity 0 [ 5.240505] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 5.240756] xen: --> pirq=8 -> irq=8 (gsi=8) [ 5.240764] pnp 00:04: [irq 8] [ 5.240926] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.241171] pnp 00:05: [io 0x03f8-0x03ff] [ 5.241176] xen: registering gsi 4 triggering 1 polarity 0 [ 5.241182] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 5.241432] xen: --> pirq=4 -> irq=4 (gsi=4) [ 5.241437] Already setup the GSI :4 [ 5.241683] pnp 00:05: [irq 4] [ 5.241866] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.242099] pnp 00:06: [io 0x02f8-0x02ff] [ 5.242105] xen: registering gsi 3 triggering 1 polarity 0 [ 5.242111] xen_map_pirq_gsi: returning irq 3 for gsi 3 [ 5.242398] xen: --> pirq=3 -> irq=3 (gsi=3) [ 5.242406] pnp 00:06: [irq 3] [ 5.242591] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.242646] pnp 00:07: [io 0x0800-0x087f] [ 5.242651] pnp 00:07: [io 0x00e0-0x00e7] [ 5.242656] pnp 00:07: [io 0x0880-0x08ff] [ 5.242660] pnp 00:07: [io 0x0900-0x091f] [ 5.242665] pnp 00:07: [io 0x0920-0x0923] [ 5.242669] pnp 00:07: [io 0x0924] [ 5.242674] pnp 00:07: [io 0x0ca0-0x0ca7] [ 5.242679] pnp 00:07: [io 0x0ca9-0x0cab] [ 5.242683] pnp 00:07: [io 0x0cad-0x0caf] [ 5.242688] pnp 00:07: [io 0x0060] [ 5.242692] pnp 00:07: [io 0x0064] [ 5.242894] system 00:07: [io 0x0800-0x087f] has been reserved [ 5.243150] system 00:07: [io 0x0880-0x08ff] has been reserved [ 5.243405] system 00:07: [io 0x0900-0x091f] has been reserved [ 5.243687] system 00:07: [io 0x0920-0x0923] has been reserved [ 5.243947] system 00:07: [io 0x0924] has been reserved [ 5.244200] system 00:07: [io 0x0ca0-0x0ca7] has been reserved [ 5.244452] system 00:07: [io 0x0ca9-0x0cab] has been reserved [ 5.244701] system 00:07: [io 0x0cad-0x0caf] has been reserved [ 5.244954] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.245065] pnp 00:08: [io 0x0ca8] [ 5.245069] pnp 00:08: [io 0x0cac] [ 5.245074] pnp 00:08: [irq 0 disabled] [ 5.245275] system 00:08: [io 0x0ca8] has been reserved [ 5.245528] system 00:08: [io 0x0cac] has been reserved [ 5.245781] system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active) [ 5.245847] pnp 00:09: [io 0x0ca8-0x0ca7 disabled] [ 5.245852] pnp 00:09: [io 0x0cac-0x0cab disabled] [ 5.245856] pnp 00:09: [irq 0 disabled] [ 5.246062] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 5.246769] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 5.246976] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 5.247233] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.247321] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 5.247468] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 5.247499] pnp 00:0c: [mem 0xfed50000-0xfed51fff] [ 5.247708] system 00:0c: [mem 0xfed50000-0xfed51fff] has been reserved [ 5.247996] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.248304] pnp: PnP ACPI: found 13 devices [ 5.248553] ACPI: ACPI bus type pnp unregistered [ 5.248803] PnPBIOS: Disabled [ 5.260338] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 5.260672] PCI: max bus depth: 1 pci_try_num: 2 [ 5.260760] pci 0000:00:03.0: PCI bridge to [bus 04-04] [ 5.261033] pci 0000:00:05.0: PCI bridge to [bus 05-05] [ 5.261306] pci 0000:00:1c.0: PCI bridge to [bus 03-03] [ 5.261559] pci 0000:00:1c.0: bridge window [io 0xf000-0xffff] [ 5.261841] pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf2fffff] [ 5.262114] pci 0000:00:1c.4: PCI bridge to [bus 02-02] [ 5.262376] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xddffffff] [ 5.262651] pci 0000:01:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref] [ 5.263134] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 5.263396] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] [ 5.263653] pci 0000:00:1e.0: bridge window [mem 0xd9800000-0xd9ffffff 64bit pref] [ 5.264132] xen: registering gsi 16 triggering 0 polarity 1 [ 5.264162] xen: --> pirq=16 -> irq=16 (gsi=16) [ 5.264171] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.264445] pci 0000:00:03.0: setting latency timer to 64 [ 5.264460] xen: registering gsi 16 triggering 0 polarity 1 [ 5.264467] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 5.264717] xen: --> pirq=16 -> irq=16 (gsi=16) [ 5.264722] Already setup the GSI :16 [ 5.264970] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.265229] pci 0000:00:05.0: setting latency timer to 64 [ 5.265250] pci 0000:00:1c.0: setting latency timer to 64 [ 5.265270] pci 0000:00:1c.4: setting latency timer to 64 [ 5.265288] pci 0000:00:1e.0: setting latency timer to 64 [ 5.265297] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 5.265302] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 5.265307] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 5.265312] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfdffffff] [ 5.265317] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 5.265322] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 5.265327] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf2fffff] [ 5.265332] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff] [ 5.265337] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdeffffff] [ 5.265342] pci_bus 0000:01: resource 2 [mem 0xd9800000-0xd9ffffff 64bit pref] [ 5.265347] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 5.265352] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 5.265357] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 5.265362] pci_bus 0000:01: resource 7 [mem 0xc0000000-0xfdffffff] [ 5.265367] pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff] [ 5.265372] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 5.265377] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff] [ 5.265430] NET: Registered protocol family 2 [ 5.265794] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 5.266497] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 5.267519] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 5.268043] TCP: Hash tables configured (established 131072 bind 65536) [ 5.268294] TCP reno registered [ 5.268538] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 5.268813] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 5.269194] NET: Registered protocol family 1 [ 5.269700] RPC: Registered named UNIX socket transport module. [ 5.269960] RPC: Registered udp transport module. [ 5.270211] RPC: Registered tcp transport module. [ 5.270458] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.270765] xen: registering gsi 22 triggering 0 polarity 1 [ 5.270785] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.270794] pci 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.283377] pci 0000:00:1a.0: PCI INT A disabled [ 5.283648] xen: registering gsi 22 triggering 0 polarity 1 [ 5.283656] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 5.283925] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.283930] Already setup the GSI :22 [ 5.284176] pci 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.284456] pci 0000:00:1d.0: PCI INT A disabled [ 5.284749] pci 0000:01:03.0: Boot video device [ 5.284820] PCI: CLS 64 bytes, default 64 [ 5.284904] Unpacking initramfs... [ 5.424545] Freeing initrd memory: 71628k freed [ 5.438426] audit: initializing netlink socket (disabled) [ 5.438692] type=2000 audit(1331568751.405:1): initialized [ 5.440710] highmem bounce pool size: 64 pages [ 5.446012] VFS: Disk quotas dquot_6.5.2 [ 5.446448] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.448117] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 5.448557] msgmni has been set to 1133 [ 5.452218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 5.452681] io scheduler noop registered [ 5.452930] io scheduler deadline registered [ 5.453200] io scheduler cfq registered (default) [ 5.453702] pcieport 0000:00:03.0: setting latency timer to 64 [ 5.454027] pcieport 0000:00:05.0: setting latency timer to 64 [ 5.454335] pcieport 0000:00:1c.0: setting latency timer to 64 [ 5.454620] pcieport 0000:00:1c.4: setting latency timer to 64 [ 5.454980] aer 0000:00:03.0:pcie02: service driver aer loaded [ 5.455053] aer 0000:00:05.0:pcie02: service driver aer loaded [ 5.455096] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 5.455355] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 5.455391] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 5.455651] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 5.455702] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 5.455967] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 5.456227] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 5.456280] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 5.456537] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 5.456790] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt [ 5.457054] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 5.457371] isapnp: Scanning for PnP cards... [ 5.811675] isapnp: No Plug & Play device found [ 5.812034] Event-channel device installed. [ 5.812550] xen-pciback: backend is vpci [ 5.813586] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 6.155499] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 6.408040] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 7.219692] hpet_acpi_add: no address or irqs in _CRS [ 7.220073] Non-volatile memory driver v1.3 [ 7.220858] telclk_interrup = 0xf non-mcpbl0010 hw. [ 7.221109] Linux agpgart interface v0.103 [ 7.223661] usbcore: registered new interface driver hwa-rc [ 7.223921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.224205] xen: registering gsi 22 triggering 0 polarity 1 [ 7.224213] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 7.224462] xen: --> pirq=22 -> irq=22 (gsi=22) [ 7.224467] Already setup the GSI :22 [ 7.224711] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.224980] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 7.224988] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 7.225245] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 7.225770] ehci_hcd 0000:00:1a.0: debug port 2 [ 7.229920] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 7.229955] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xdf0fc000 [ 7.243329] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 7.243644] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.243917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.244378] usb usb1: Product: EHCI Host Controller [ 7.244626] usb usb1: Manufacturer: Linux 3.2.9 ehci_hcd [ 7.244878] usb usb1: SerialNumber: 0000:00:1a.0 [ 7.245381] hub 1-0:1.0: USB hub found [ 7.245632] hub 1-0:1.0: 2 ports detected [ 7.246136] xen: registering gsi 22 triggering 0 polarity 1 [ 7.246143] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 7.246394] xen: --> pirq=22 -> irq=22 (gsi=22) [ 7.246399] Already setup the GSI :22 [ 7.246665] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.246936] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.246944] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 7.247206] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.247724] ehci_hcd 0000:00:1d.0: debug port 2 [ 7.251884] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 7.251895] ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000 [ 7.267337] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 7.267647] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.267896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.268345] usb usb2: Product: EHCI Host Controller [ 7.268608] usb usb2: Manufacturer: Linux 3.2.9 ehci_hcd [ 7.268855] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.274446] hub 2-0:1.0: USB hub found [ 7.274697] hub 2-0:1.0: 2 ports detected [ 7.275215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.275531] uhci_hcd: USB Universal Host Controller Interface driver [ 7.275831] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26 [ 7.276250] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 7.277389] i8042: No controller found [ 7.277726] mousedev: PS/2 mouse device common for all mice [ 7.278430] rtc_cmos 00:04: RTC can wake from S4 [ 7.278888] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 7.279183] rtc0: alarms up to one day, y3k, 242 bytes nvram [ 7.279548] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 7.280002] wdt: Xen WatchDog Timer Driver v0.01 [ 7.280308] wdt: cannot register miscdev on minor=130 (-16) [ 7.280563] wdt: probe of wdt failed with error -16 [ 7.280816] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 7.281202] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.282496] TCP cubic registered [ 7.283039] NET: Registered protocol family 10 [ 7.285137] Mobile IPv6 [ 7.285383] NET: Registered protocol family 17 [ 7.286288] sctp: Hash tables configured (established 65536 bind 65536) [ 7.287024] Registering the dns_resolver key type [ 7.287304] Using IPI No-Shortcut mode [ 7.287794] PM: Hibernation image not present or could not be loaded. [ 7.287804] registered taskstats version 1 [ 7.288875] console [netcon0] enabled [ 7.289120] netconsole: network logging started [ 7.289462] rtc_cmos 00:04: setting system clock to 2012-03-12 16:12:32 UTC (1331568752) [ 7.290011] Initializing network drop monitor service [ 7.290615] Freeing unused kernel memory: 436k freed [ 7.292258] Write protecting the kernel text: 3916k [ 7.293317] Write protecting the kernel read-only data: 2456k [ 7.293588] NX-protecting the kernel data: 4276k [ 7.336291] udev[133]: starting version 164 [ 7.428051] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) [ 7.428586] xen: registering gsi 16 triggering 0 polarity 1 [ 7.428601] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 7.428872] xen: --> pirq=16 -> irq=16 (gsi=16) [ 7.428882] Already setup the GSI :16 [ 7.429147] bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.429445] bnx2 0000:02:00.0: setting latency timer to 64 [ 7.433558] bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 16, node addr 84:2b:2b:52:88:2a [ 7.434250] SCSI subsystem initialized [ 7.436372] xen: registering gsi 17 triggering 0 polarity 1 [ 7.436413] xen: --> pirq=17 -> irq=17 (gsi=17) [ 7.436429] bnx2 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.436719] bnx2 0000:02:00.1: setting latency timer to 64 [ 7.446130] bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 17, node addr 84:2b:2b:52:88:2b [ 7.448386] Fusion MPT base driver 3.04.20 [ 7.448657] Copyright (c) 1999-2008 LSI Corporation [ 7.452243] Fusion MPT SAS Host driver 3.04.20 [ 7.452584] xen: registering gsi 16 triggering 0 polarity 1 [ 7.452595] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 7.452866] xen: --> pirq=16 -> irq=16 (gsi=16) [ 7.452874] Already setup the GSI :16 [ 7.453145] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.454448] mptbase: ioc0: Initiating bringup [ 7.555343] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 7.687769] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 7.688047] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.689263] hub 1-1:1.0: USB hub found [ 7.689626] hub 1-1:1.0: 6 ports detected [ 7.799371] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 7.931760] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 7.932060] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.933238] hub 2-1:1.0: USB hub found [ 7.933615] hub 2-1:1.0: 8 ports detected [ 8.007511] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd [ 8.099790] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514 [ 8.100092] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.100843] hub 1-1.1:1.0: USB hub found [ 8.101296] hub 1-1.1:1.0: 4 ports detected [ 8.167330] ioc0: LSISAS1068E B3: Capabilities={Initiator} [ 8.167792] mptsas 0000:03:00.0: setting latency timer to 64 [ 24.714715] scsi0 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 [ 24.751376] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000 [ 24.763869] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HE253GJ 0001 PQ: 0 ANSI: 5 [ 24.778524] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) [ 24.879820] sd 0:0:0:0: [sda] Write Protect is off [ 24.880107] sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08 [ 24.891528] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.019584] sda: sda1 sda2 < sda5 > [ 25.139667] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.524273] PM: Starting manual resume from disk [ 25.524526] PM: Hibernation image partition 8:5 present [ 25.524530] PM: Looking for hibernation image. [ 25.524791] PM: Image not found (code -22) [ 25.524797] PM: Hibernation image not present or could not be loaded. [ 25.549332] kjournald starting. Commit interval 5 seconds [ 25.549404] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 26.512010] udev[354]: starting version 164 [ 26.764811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 26.765460] ACPI: Power Button [PWRF] [ 27.495932] Adding 6066172k swap on /dev/sda5. Priority:-1 extents:1 across:6066172k [ 27.630087] EXT3-fs (sda1): using internal journal [ 27.745241] loop: module loaded [ 28.708859] bnx2 0000:02:00.0: eth0: using MSIX [ 28.709262] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.835586] bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex [ 31.836276] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.763300] eth0: no IPv6 routers present [ 67.494269] ttyS0: LSR safety check engaged! [ 67.496017] ttyS0: LSR safety check engaged! [ 69.751457] sshd (1303): /proc/1303/oom_adj is deprecated, please use /proc/1303/oom_score_adj instead. [ 120.018160] XENBUS: Unable to read cpu state [ 120.018604] XENBUS: Unable to read cpu state [ 120.019014] XENBUS: Unable to read cpu state [ 120.019457] XENBUS: Unable to read cpu state [ 120.019891] XENBUS: Unable to read cpu state [ 120.020299] XENBUS: Unable to read cpu state [ 120.020710] XENBUS: Unable to read cpu state [ 120.021153] XENBUS: Unable to read cpu state [ 289.467545] svc: failed to register lockdv1 RPC service (errno 97). [79368.191822] svc: failed to register lockdv1 RPC service (errno 97).