[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH RFC V6 1/11] x86/spinlock: replace pv spinlocks with pv ticketlocks



On 21/03/12 10:20, Raghavendra K T wrote:
From: Jeremy Fitzhardinge<jeremy.fitzhardinge@xxxxxxxxxx>

Rather than outright replacing the entire spinlock implementation in
order to paravirtualize it, keep the ticket lock implementation but add
a couple of pvops hooks on the slow patch (long spin on lock, unlocking
a contended lock).

Ticket locks have a number of nice properties, but they also have some
surprising behaviours in virtual environments.  They enforce a strict
FIFO ordering on cpus trying to take a lock; however, if the hypervisor
scheduler does not schedule the cpus in the correct order, the system can
waste a huge amount of time spinning until the next cpu can take the lock.

(See Thomas Friebel's talk "Prevent Guests from Spinning Around"
http://www.xen.org/files/xensummitboston08/LHP.pdf  for more details.)

To address this, we add two hooks:
  - __ticket_spin_lock which is called after the cpu has been
    spinning on the lock for a significant number of iterations but has
    failed to take the lock (presumably because the cpu holding the lock
    has been descheduled).  The lock_spinning pvop is expected to block
    the cpu until it has been kicked by the current lock holder.
  - __ticket_spin_unlock, which on releasing a contended lock
    (there are more cpus with tail tickets), it looks to see if the next
    cpu is blocked and wakes it if so.

When compiled with CONFIG_PARAVIRT_SPINLOCKS disabled, a set of stub
functions causes all the extra code to go away.

I've made some real world benchmarks based on this serie of patches applied on top of a vanilla Linux-3.3-rc6 (commit 4704fe65e55fb088fbcb1dc0b15ff7cc8bff3685), with both CONFIG_PARAVIRT_SPINLOCK=y and n, which means essentially 4 versions compared:
* vanilla - CONFIG_PARAVIRT_SPINLOCK - patch
* vanilla + CONFIG_PARAVIRT_SPINLOCK - patch
* vanilla - CONFIG_PARAVIRT_SPINLOCK + patch
* vanilla + CONFIG_PARAVIRT_SPINLOCK + patch

(you can check out the monolithic kernel configuration I used, and verify the sole difference, here):
http://xenbits.xen.org/people/attilio/jeremy-spinlock/kernel-configs/

Tests, information and results are summarized below.

== System used information:
* Machine is a XEON x3450, 2.6GHz, 8-ways system:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/dmesg
* System version, a Debian Squeeze 6.0.4:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/debian-version
* gcc version, 4.4.5:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/gcc-version

== Tests performed
* pgbench based on PostgreSQL 9.2 (development version) as it has a lot of scalability improvements in it:
http://www.postgresql.org/docs/devel/static/install-getsource.html

I used a stock installation, with only this simple configuration change:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/postsgresql.conf.patch

For collecting data I used this simple scripts, which runs the test 10 times every time with a different set of threads (from 1 to 64). Please note that the first 8 runs cache all the data in memory in order to avoid subsequent I/O, thus they are discarded in sampling and calculation:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/pgbench_script

Here is the crude data (please remind this is tps, thus the higher the better):
http://xenbits.xen.org/people/attilio/jeremy-spinlock/pgbench-crude-datas/

And here are data chartered with ministat tool, comparing all the 4 kernel configuration for every thread configuration:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/pgbench-9.2-total.bench

As you can see, the patch doesn't really show a statistically meaningful difference for this workload, excluding the single-thread run for the patched + CONFIG_PARAVIRT_SPINLOCK=y case, which seems 5% faster.


* pbzip2, which is a parallel version of bzip2, supposed to reproduce a CPU-intensive, multithreaded, application. The file choosen for compression is 1GB sized, got from /dev/urandom (this is not published but I may have it, so if you need it for more tests please just ask), and all the I/O is done on a tmpfs volume in order to avoid I/O floaty effects.

For collecting data I used this simple scripts, which runs the test 10 times every time with a different set of threads (from 1 to 64):
http://xenbits.xen.org/people/attilio/jeremy-spinlock/pbzip2bench_script

Here is the crude data (please remind this is time(1) output, thus the lower the better):
http://xenbits.xen.org/people/attilio/jeremy-spinlock/pbzip2-crude-datas/

And here are data chartered with ministat tool, comparing all the 4 kernel configuration for every thread configuration:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/pbzip2-1.1.1-total.bench

As you can see, the patch doesn't really show a statistically meaningful difference for this workload.


* kernbench-0.50 run, doing I/O on a 10GB tmpfs volume (thus no actual I/O involved), with the following invokation:
./kernbench -n10 -s -c16 -M -f

(I had to do that because kernbench wasn't getting a good maximum value at all, thus I disabled default maximum and forced for 16 threads).

Here is the crude data (please remind this is time(1) output, thus the lower the better):
http://xenbits.xen.org/people/attilio/jeremy-spinlock/kernbench-crude-datas/

Please note that kernbench already calculates std deviation for them. However I also wanted a ministat summary in order to quickly display any possible difference, thus I just replicated 3 times any value (the minimum requested by ministat) and charted them:
http://xenbits.xen.org/people/attilio/jeremy-spinlock/kernbench-0.50-total.bench

Again, it doesn't seem to be any meaningful statistical difference.

== Results
This test points in the direction that Jeremy's rebased patches don't introduce a peformance penalty at all, but also that we could likely consider CONFIG_PARAVIRT_SPINLOCK option removal, or turn it on by default and suggest disabling just on very old CPUs (assuming a performance regression can be proven there).

If you have questions please let me know.

Thanks,
Attilio

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.