|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v6 19/27] arm: early setup code
Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Signed-off-by: Tim Deegan <Tim.Deegan@xxxxxxxxxx>
---
xen/arch/arm/setup.c | 206 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 206 insertions(+), 0 deletions(-)
create mode 100644 xen/arch/arm/setup.c
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
new file mode 100644
index 0000000..51afb31
--- /dev/null
+++ b/xen/arch/arm/setup.c
@@ -0,0 +1,206 @@
+/*
+ * xen/arch/arm/setup.c
+ *
+ * Early bringup code for an ARMv7-A with virt extensions.
+ *
+ * Tim Deegan <tim@xxxxxxx>
+ * Copyright (c) 2011 Citrix Systems.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <xen/config.h>
+#include <xen/compile.h>
+#include <xen/domain_page.h>
+#include <xen/types.h>
+#include <xen/string.h>
+#include <xen/serial.h>
+#include <xen/sched.h>
+#include <xen/console.h>
+#include <xen/init.h>
+#include <xen/irq.h>
+#include <xen/mm.h>
+#include <xen/softirq.h>
+#include <xen/keyhandler.h>
+#include <xen/cpu.h>
+#include <asm/page.h>
+#include <asm/current.h>
+#include <asm/setup.h>
+#include "gic.h"
+
+/* maxcpus: maximum number of CPUs to activate. */
+static unsigned int __initdata max_cpus = NR_CPUS;
+
+/* Xen stack for bringing up the first CPU. */
+unsigned char init_stack[STACK_SIZE] __attribute__((__aligned__(STACK_SIZE)));
+
+extern char __init_begin[], __init_end[], __bss_start[];
+
+static __attribute_used__ void init_done(void)
+{
+ /* TODO: free (or page-protect) the init areas.
+ memset(__init_begin, 0xcc, __init_end - __init_begin);
+ free_xen_data(__init_begin, __init_end);
+ */
+ printk("Freed %ldkB init memory.\n", (long)(__init_end-__init_begin)>>10);
+
+ startup_cpu_idle_loop();
+}
+
+static void __init init_idle_domain(void)
+{
+ scheduler_init();
+ set_current(idle_vcpu[0]);
+ this_cpu(curr_vcpu) = current;
+ /* TODO: setup_idle_pagetable(); */
+}
+
+void __init start_xen(unsigned long boot_phys_offset,
+ unsigned long arm_type,
+ unsigned long atag_paddr)
+
+{
+ int i;
+
+ setup_pagetables(boot_phys_offset);
+
+#ifdef EARLY_UART_ADDRESS
+ /* Map the UART */
+ /* TODO Need to get device tree or command line for UART address */
+ set_fixmap(FIXMAP_CONSOLE, EARLY_UART_ADDRESS >> PAGE_SHIFT, DEV_SHARED);
+ pl011_init(0, FIXMAP_ADDR(FIXMAP_CONSOLE));
+ console_init_preirq();
+#endif
+
+ set_current((struct vcpu *)0xfffff000); /* debug sanity */
+ idle_vcpu[0] = current;
+ set_processor_id(0); /* needed early, for smp_processor_id() */
+
+ /* TODO: smp_prepare_boot_cpu(void) */
+ cpumask_set_cpu(smp_processor_id(), &cpu_online_map);
+ cpumask_set_cpu(smp_processor_id(), &cpu_present_map);
+
+ smp_prepare_cpus(max_cpus);
+
+ init_xen_time();
+
+ /* TODO: This needs some thought, as well as device-tree mapping.
+ * For testing, assume that the whole xenheap is contiguous in RAM */
+ setup_xenheap_mappings(0x8000000, 0x40000); /* 1 GB @ 512GB */
+ /* Must pass a single mapped page for populating bootmem_region_list. */
+ init_boot_pages(pfn_to_paddr(xenheap_mfn_start),
+ pfn_to_paddr(xenheap_mfn_start+1));
+
+ /* Add non-xenheap memory */
+ init_boot_pages(0x8040000000, 0x80c0000000); /* 2 GB @513GB */
+
+ /* TODO Make sure Xen's own pages aren't added
+ * -- the memory above doesn't include our relocation target. */
+ /* TODO Handle payloads too */
+
+ /* TODO Need to find actual memory, for now use 4GB at 512GB */
+ setup_frametable_mappings(0x8000000000ULL, 0x8100000000UL);
+
+ /* Add xenheap memory */
+ init_xenheap_pages(pfn_to_paddr(xenheap_mfn_start+1),
+ pfn_to_paddr(xenheap_mfn_end));
+
+ end_boot_allocator();
+
+ /* Setup Hyp vector base */
+ WRITE_CP32((uint32_t) hyp_traps_vector, HVBAR);
+ printk("Set hyp vector base to %"PRIx32" (expected %p)\n",
+ READ_CP32(HVBAR), hyp_traps_vector);
+
+ /* Setup Stage 2 address translation */
+ /* SH0=00, ORGN0=IRGN0=01
+ * SL0=01 (Level-1)
+ * T0SZ=(1)1000 = -8 (40 bit physical addresses)
+ */
+ WRITE_CP32(0x80002558, VTCR); isb();
+
+ softirq_init();
+ tasklet_subsys_init();
+
+ init_IRQ();
+
+ gic_init();
+
+ gic_route_irqs();
+
+ init_maintenance_interrupt();
+ init_timer_interrupt();
+
+ timer_init();
+
+ init_idle_domain();
+
+ rcu_init();
+
+ local_irq_enable();
+
+ initialize_keytable();
+
+ console_init_postirq();
+
+ do_presmp_initcalls();
+
+ for_each_present_cpu ( i )
+ {
+ if ( (num_online_cpus() < max_cpus) && !cpu_online(i) )
+ {
+ int ret = cpu_up(i);
+ if ( ret != 0 )
+ printk("Failed to bring up CPU %u (error %d)\n", i, ret);
+ }
+ }
+
+ printk("Brought up %ld CPUs\n", (long)num_online_cpus());
+ /* TODO: smp_cpus_done(); */
+
+ do_initcalls();
+
+ /* Create initial domain 0. */
+ dom0 = domain_create(0, 0, 0);
+ if ( dom0 == NULL )
+ printk("domain_create failed\n");
+ if ( (dom0 == NULL) || (alloc_dom0_vcpu0() == NULL) )
+ panic("Error creating domain 0\n");
+
+ dom0->is_privileged = 1;
+ dom0->target = NULL;
+
+ if ( construct_dom0(dom0) != 0)
+ panic("Could not set up DOM0 guest OS\n");
+
+ /* Scrub RAM that is still free and so may go to an unprivileged domain.
+ XXX too slow in simulator
+ scrub_heap_pages();
+ */
+
+ console_endboot();
+
+ /* Hide UART from DOM0 if we're using it */
+ serial_endboot();
+
+ domain_unpause_by_systemcontroller(dom0);
+
+ reset_stack_and_jump(init_done);
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-set-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
--
1.7.2.5
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |