Xen project Mailing List

Re: [Xen-devel] linux 3.3-pre-rc1: Starting domU fails with Error: Failed to query current memory allocation of dom0.

To: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>

From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>

Date: Thu, 12 Jan 2012 07:07:17 -0800 (PST)

Cc: xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxx>

Delivery-date: Thu, 12 Jan 2012 15:11:23 +0000

List-id: Xen developer discussion <xen-devel.lists.xensource.com>

On Thu, Jan 12, 2012 at 01:38:32PM +0100, Sander Eikelenboom wrote: > Hi Konrad, > > Today i tried linuses tree of today (last commit is > 4c4d285ad5665bfbd983b95fde8d7a477d24a361). > > It boots dom0 fine, but it fails to start any domU with: "Error: Failed to > query current memory allocation of dom0." > With my previous 3.1.5 kernel everything is fine, nothing else changed in > config in between. Does it work if you use 'xl'? > > dmesg and xm dmesg attached > > -- > Sander > > > Dom0 shows: > total used free shared buffers cached > Mem: 938860 220484 718376 0 27812 72128 > -/+ buffers/cache: 120544 818316 > Swap: 2097148 0 2097148 > > > xentop: > > xentop - 13:34:31 Xen 4.1.3-rc1-pre > 1 domains: 1 running, 0 blocked, 0 paused, 0 crashed, 0 dying, 0 shutdown > Mem: 8386732k total, 1165260k used, 7221472k free CPUs: 6 @ 3200MHz > NAME STATE CPU(sec) CPU(%) MEM(k) MEM(%) MAXMEM(k) MAXMEM(%) > VCPUS NETS NETTX(k) NETRX(k) VBDS VBD_OO VBD_RD VBD_WR VBD_RSECT > VBD_WSECT SSID > Domain-0 -----r 82 1.3 1048192 12.5 no limit n/a > 6 0 0 0 0 0 0 0 0 > 0 0 > > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0-rc0+ (root@serveerstertje) (gcc version > 4.4.5 (Debian 4.4.5-8) ) #9 SMP Thu Jan 12 12:40:24 CET 2012 > [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose > mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb > earlyprintk=xen max_loop=50 loop_max_part=10 xen-pciback.passthrough=1 > xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) > pci=resource_alignment=07:01.0;07:01.1;07:01.2 debug debug loglevel=10 > [ 0.000000] Freeing 9b-100 pfn range: 101 pages freed > [ 0.000000] 1-1 mapping on 9b->100 > [ 0.000000] 1-1 mapping on afe90->100000 > [ 0.000000] Released 101 pages of unused memory > [ 0.000000] Set 328149 page(s) to 1-1 mapping > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009b000 (usable) > [ 0.000000] Xen: 000000000009b000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 00000000afe90000 (usable) > [ 0.000000] Xen: 00000000afe90000 - 00000000afe9e000 (ACPI data) > [ 0.000000] Xen: 00000000afe9e000 - 00000000afee0000 (ACPI NVS) > [ 0.000000] Xen: 00000000afee0000 - 00000000aff00000 (reserved) > [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved) > [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] Xen: 0000000100000000 - 0000000250000000 (usable) > [ 0.000000] e820 remove range: 0000000040000000 - ffffffffffffffff (usable) > [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] user-defined physical RAM map: > [ 0.000000] user: 0000000000000000 - 000000000009b000 (usable) > [ 0.000000] user: 000000000009b000 - 0000000000100000 (reserved) > [ 0.000000] user: 0000000000100000 - 0000000040000000 (usable) > [ 0.000000] user: 00000000afe90000 - 00000000afe9e000 (ACPI data) > [ 0.000000] user: 00000000afe9e000 - 00000000afee0000 (ACPI NVS) > [ 0.000000] user: 00000000afee0000 - 00000000aff00000 (reserved) > [ 0.000000] user: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] user: 00000000fec20000 - 00000000fec21000 (reserved) > [ 0.000000] user: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] user: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] DMI present. > [ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.7B5 > 06/22/2010 > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > [ 0.000000] No AGP bridge found > [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 > [ 0.000000] initial memory mapped : 0 - 031eb000 > [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 8192 > [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 > [ 0.000000] 0000000000 - 0040000000 page 4k > [ 0.000000] kernel direct mapping tables up to 40000000 @ 2958000-2b5a000 > [ 0.000000] xen: setting RW the range 2b38000 - 2b5a000 > [ 0.000000] RAMDISK: 02b5a000 - 031eb000 > [ 0.000000] ACPI: RSDP 00000000000fb120 00014 (v00 ACPIAM) > [ 0.000000] ACPI: RSDT 00000000afe90000 00048 (v01 MSI OEMSLIC > 20100622 MSFT 00000097) > [ 0.000000] ACPI: FACP 00000000afe90200 00084 (v01 7640MS A7640100 > 20100622 MSFT 00000097) > [ 0.000000] ACPI: DSDT 00000000afe905e0 09449 (v01 A7640 A7640100 > 00000100 INTL 20051117) > [ 0.000000] ACPI: FACS 00000000afe9e000 00040 > [ 0.000000] ACPI: APIC 00000000afe90390 00088 (v01 7640MS A7640100 > 20100622 MSFT 00000097) > [ 0.000000] ACPI: MCFG 00000000afe90420 0003C (v01 7640MS OEMMCFG > 20100622 MSFT 00000097) > [ 0.000000] ACPI: SLIC 00000000afe90460 00176 (v01 MSI OEMSLIC > 20100622 MSFT 00000097) > [ 0.000000] ACPI: OEMB 00000000afe9e040 00072 (v01 7640MS A7640100 > 20100622 MSFT 00000097) > [ 0.000000] ACPI: SRAT 00000000afe9a5e0 00108 (v03 AMD FAM_F_10 > 00000002 AMD 00000001) > [ 0.000000] ACPI: HPET 00000000afe9a6f0 00038 (v01 7640MS OEMHPET > 20100622 MSFT 00000097) > [ 0.000000] ACPI: IVRS 00000000afe9a730 00100 (v01 AMD RD890S > 00202031 AMD 00000000) > [ 0.000000] ACPI: SSDT 00000000afe9a830 00DA4 (v01 A M I POWERNOW > 00000001 AMD 00000001) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000040000000 > [ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000 > [ 0.000000] NODE_DATA [000000003fffb000 - 000000003fffffff] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal empty > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] Early memory PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009b > [ 0.000000] 0: 0x00000100 -> 0x00040000 > [ 0.000000] On node 0 totalpages: 262027 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 2 pages reserved > [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 4032 pages used for memmap > [ 0.000000] DMA32 zone: 254016 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 6, version 255, address 0xfec00000, GSI > 0-255 > [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > [ 0.000000] IOAPIC[1]: apic_id 7, version 255, address 0xfec20000, GSI > 24-279 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 > [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 296 > [ 0.000000] Allocating PCI resources starting at 40000000 (gap: > 40000000:6fe90000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.1.3-rc1-pre (preserve-AD) > [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 > nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003ff3e000 s78784 r8192 > d23616 u110592 > [ 0.000000] pcpu-alloc: s78784 r8192 d23616 u110592 alloc=27*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total > pages: 257929 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro > verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb > earlyprintk=xen max_loop=50 loop_max_part=10 xen-pciback.passthrough=1 > xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) > pci=resource_alignment=07:01.0;07:01.1;07:01.2 debug debug loglevel=10 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Placing 64MB software IO TLB between ffff88003a600000 - > ffff88003e600000 > [ 0.000000] software IO TLB at phys 0x3a600000 - 0x3e600000 > [ 0.000000] Memory: 930212k/1048576k available (9111k kernel code, 468k > absent, 117896k reserved, 6056k data, 644k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, > CPUs=6, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:4352 nr_irqs:1536 16 > [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1 > [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 > [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) > [ 0.000000] xen: acpi sci 9 > [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) > [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) > [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) > [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) > [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) > [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) > [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) > [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) > [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 > [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) > [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) > [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) > [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) > [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) > [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) > [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled, bootconsole disabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., > Ingo Molnar > [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 > [ 0.000000] ... MAX_LOCK_DEPTH: 48 > [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 > [ 0.000000] ... CLASSHASH_SIZE: 4096 > [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 > [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 > [ 0.000000] ... CHAINHASH_SIZE: 16384 > [ 0.000000] memory used by lock dependency info: 5823 kB > [ 0.000000] per task-struct memory footprint: 1920 bytes > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 3200.160 MHz processor. > [ 0.000999] Calibrating delay loop (skipped), value calculated using timer > frequency.. 6400.32 BogoMIPS (lpj=3200160) > [ 0.000999] pid_max: default: 32768 minimum: 301 > [ 0.000999] Security Framework initialized > [ 0.000999] SELinux: Initializing. > [ 0.000999] SELinux: Starting in permissive mode > [ 0.000999] Dentry cache hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.000999] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.000999] Mount-cache hash table entries: 256 > [ 0.001378] Initializing cgroup subsys cpuacct > [ 0.001384] Initializing cgroup subsys freezer > [ 0.001445] tseg: 0000000000 > [ 0.001466] CPU: Physical Processor ID: 0 > [ 0.001470] CPU: Processor Core ID: 0 > [ 0.002271] ACPI: Core revision 20110623 > [ 0.013132] cpu 0 spinlock event irq 297 > [ 0.013258] Performance Events: Broken PMU hardware detected, using > software events only. > [ 0.013501] MCE: In-kernel MCE decoding enabled. > [ 0.013515] NMI watchdog disabled (cpu0): hardware events not enabled > [ 0.013684] installing Xen timer for CPU 1 > [ 0.013704] cpu 1 spinlock event irq 303 > [ 0.013729] lockdep: fixing up alternatives. > [ 0.013854] NMI watchdog disabled (cpu1): hardware events not enabled > [ 0.013998] installing Xen timer for CPU 2 > [ 0.013998] cpu 2 spinlock event irq 309 > [ 0.014098] NMI watchdog disabled (cpu2): hardware events not enabled > [ 0.014268] installing Xen timer for CPU 3 > [ 0.014287] cpu 3 spinlock event irq 315 > [ 0.014408] NMI watchdog disabled (cpu3): hardware events not enabled > [ 0.014560] installing Xen timer for CPU 4 > [ 0.014581] cpu 4 spinlock event irq 321 > [ 0.014702] NMI watchdog disabled (cpu4): hardware events not enabled > [ 0.014857] installing Xen timer for CPU 5 > [ 0.014876] cpu 5 spinlock event irq 327 > [ 0.015067] NMI watchdog disabled (cpu5): hardware events not enabled > [ 0.015120] Brought up 6 CPUs > [ 0.016561] Grant tables using version 2 layout. > [ 0.016561] Grant table initialized > [ 0.016561] RTC time: 12:25:12, date: 01/12/12 > [ 0.016561] NET: Registered protocol family 16 > [ 0.018139] node 0 link 0: io port [1000, ffffff] > [ 0.018139] TOM: 00000000b0000000 aka 2816M > [ 0.018139] Fam 10h mmconf [mem 0xe0000000-0xefffffff] > [ 0.018139] node 0 link 0: mmio [e0000000, efffffff] ==> none > [ 0.018139] node 0 link 0: mmio [f0000000, ffffffff] > [ 0.018139] node 0 link 0: mmio [a0000, bffff] > [ 0.018139] node 0 link 0: mmio [b0000000, dfffffff] > [ 0.018139] TOM2: 0000000250000000 aka 9472M > [ 0.018139] bus: [00, 07] on node 0 link 0 > [ 0.018139] bus: 00 index 0 [io 0x0000-0xffff] > [ 0.018139] bus: 00 index 1 [mem 0xf0000000-0xffffffff] > [ 0.018139] bus: 00 index 2 [mem 0x000a0000-0x000bffff] > [ 0.018139] bus: 00 index 3 [mem 0xb0000000-0xdfffffff] > [ 0.018139] bus: 00 index 4 [mem 0x250000000-0xfcffffffff] > [ 0.018309] ACPI: bus type pci registered > [ 0.018381] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.018381] PCI: not using MMCONFIG > [ 0.018381] PCI: Using configuration type 1 for base access > [ 0.018381] PCI: Using configuration type 1 for extended access > [ 0.068102] bio: create slab <bio-0> at 0 > [ 0.068119] ACPI: Added _OSI(Module Device) > [ 0.068119] ACPI: Added _OSI(Processor Device) > [ 0.068119] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.068119] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.073523] ACPI: EC: Look up EC in DSDT > [ 0.075207] ACPI: Executed 3 blocks of module-level executable AML code > [ 0.088960] ACPI: Interpreter enabled > [ 0.088967] ACPI: (supports S0 S5) > [ 0.088992] ACPI: Using IOAPIC for interrupt routing > [ 0.088992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.091780] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI > motherboard resources > [ 0.185504] ACPI: No dock devices found. > [ 0.185512] PCI: Using host bridge windows from ACPI; if necessary, use > "pci=nocrs" and report a bug > [ 0.186307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.186633] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > [ 0.186640] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > [ 0.186646] pci_root PNP0A03:00: host bridge window [mem > 0x000a0000-0x000bffff] > [ 0.186652] pci_root PNP0A03:00: host bridge window [mem > 0x000d0000-0x000dffff] > [ 0.186659] pci_root PNP0A03:00: host bridge window [mem > 0xb0000000-0xdfffffff] > [ 0.186672] pci_root PNP0A03:00: host bridge window [mem > 0xf0000000-0xfebfffff] > [ 0.186808] PCI host bridge to bus 0000:00 > [ 0.186808] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.186808] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.186808] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > [ 0.186808] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] > [ 0.186808] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff] > [ 0.186808] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] > [ 0.186808] pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600 > [ 0.186808] pci 0000:00:00.2: [1002:5a23] type 0 class 0x000806 > [ 0.187000] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 > [ 0.187127] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > [ 0.187176] pci 0000:00:03.0: [1002:5a17] type 1 class 0x000604 > [ 0.187322] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold > [ 0.187368] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604 > [ 0.187493] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold > [ 0.187536] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604 > [ 0.187661] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold > [ 0.187713] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604 > [ 0.187841] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold > [ 0.187884] pci 0000:00:0b.0: [1002:5a1f] type 1 class 0x000604 > [ 0.187980] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold > [ 0.187980] pci 0000:00:0d.0: [1002:5a1e] type 1 class 0x000604 > [ 0.187980] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold > [ 0.187980] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 > [ 0.187980] pci 0000:00:11.0: reg 10: [io 0x7000-0x7007] > [ 0.187980] pci 0000:00:11.0: reg 14: [io 0x6000-0x6003] > [ 0.187980] pci 0000:00:11.0: reg 18: [io 0x5000-0x5007] > [ 0.187980] pci 0000:00:11.0: reg 1c: [io 0x3000-0x3003] > [ 0.187980] pci 0000:00:11.0: reg 20: [io 0x2000-0x200f] > [ 0.187980] pci 0000:00:11.0: reg 24: [mem 0xf98ff000-0xf98ff3ff] > [ 0.187996] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 > [ 0.188027] pci 0000:00:12.0: reg 10: [mem 0xf98fb000-0xf98fbfff] > [ 0.188179] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 > [ 0.188211] pci 0000:00:12.2: reg 10: [mem 0xf98ff400-0xf98ff4ff] > [ 0.188354] pci 0000:00:12.2: supports D1 D2 > [ 0.188365] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot > [ 0.188406] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 > [ 0.188429] pci 0000:00:13.0: reg 10: [mem 0xf98fc000-0xf98fcfff] > [ 0.188562] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 > [ 0.188594] pci 0000:00:13.2: reg 10: [mem 0xf98ff800-0xf98ff8ff] > [ 0.188744] pci 0000:00:13.2: supports D1 D2 > [ 0.188748] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot > [ 0.188787] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 > [ 0.188927] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 > [ 0.188980] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 > [ 0.188980] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 > [ 0.188980] pci 0000:00:14.5: reg 10: [mem 0xf98fd000-0xf98fdfff] > [ 0.189002] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 > [ 0.189153] pci 0000:00:15.0: supports D1 D2 > [ 0.189237] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 > [ 0.189260] pci 0000:00:16.0: reg 10: [mem 0xf98fe000-0xf98fefff] > [ 0.189385] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 > [ 0.189417] pci 0000:00:16.2: reg 10: [mem 0xf98ffc00-0xf98ffcff] > [ 0.189567] pci 0000:00:16.2: supports D1 D2 > [ 0.189571] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot > [ 0.189614] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 > [ 0.189700] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 > [ 0.189765] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 > [ 0.189834] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 > [ 0.189920] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 > [ 0.190004] pci 0000:0b:00.0: [10de:06e4] type 0 class 0x000300 > [ 0.190026] pci 0000:0b:00.0: reg 10: [mem 0xfd000000-0xfdffffff] > [ 0.190050] pci 0000:0b:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit > pref] > [ 0.190082] pci 0000:0b:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] > [ 0.190099] pci 0000:0b:00.0: reg 24: [io 0xe800-0xe87f] > [ 0.190116] pci 0000:0b:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] > [ 0.192019] pci 0000:00:02.0: PCI bridge to [bus 0b-0b] > [ 0.192032] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > [ 0.192040] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] > [ 0.192057] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff > 64bit pref] > [ 0.192166] pci 0000:0a:00.0: [9710:9990] type 0 class 0x000c03 > [ 0.192194] pci 0000:0a:00.0: reg 10: [mem 0xf9ff8000-0xf9ff8fff] > [ 0.192404] pci 0000:0a:00.0: supports D1 D2 > [ 0.192408] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot > [ 0.192471] pci 0000:0a:00.1: [9710:9990] type 0 class 0x000c03 > [ 0.192504] pci 0000:0a:00.1: reg 10: [mem 0xf9ff9000-0xf9ff9fff] > [ 0.192701] pci 0000:0a:00.1: supports D1 D2 > [ 0.192705] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot > [ 0.192774] pci 0000:0a:00.2: [9710:9990] type 0 class 0x000c03 > [ 0.192801] pci 0000:0a:00.2: reg 10: [mem 0xf9ffa000-0xf9ffafff] > [ 0.192979] pci 0000:0a:00.2: supports D1 D2 > [ 0.192979] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot > [ 0.192979] pci 0000:0a:00.3: [9710:9990] type 0 class 0x000c03 > [ 0.192979] pci 0000:0a:00.3: reg 10: [mem 0xf9ffb000-0xf9ffbfff] > [ 0.192979] pci 0000:0a:00.3: supports D1 D2 > [ 0.192979] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot > [ 0.193038] pci 0000:0a:00.4: [9710:9990] type 0 class 0x000c03 > [ 0.193074] pci 0000:0a:00.4: reg 10: [mem 0xf9ffc000-0xf9ffcfff] > [ 0.193286] pci 0000:0a:00.4: supports D1 D2 > [ 0.193290] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot > [ 0.193357] pci 0000:0a:00.5: [9710:9990] type 0 class 0x000c03 > [ 0.193384] pci 0000:0a:00.5: reg 10: [mem 0xf9ffd000-0xf9ffdfff] > [ 0.193588] pci 0000:0a:00.5: supports D1 D2 > [ 0.193592] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot > [ 0.193653] pci 0000:0a:00.6: [9710:9990] type 0 class 0x000c03 > [ 0.193687] pci 0000:0a:00.6: reg 10: [mem 0xf9ffe000-0xf9ffefff] > [ 0.193883] pci 0000:0a:00.6: supports D1 D2 > [ 0.193887] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot > [ 0.193958] pci 0000:0a:00.7: [9710:9990] type 0 class 0x000c03 > [ 0.193979] pci 0000:0a:00.7: reg 10: [mem 0xf9fff000-0xf9ffffff] > [ 0.193979] pci 0000:0a:00.7: supports D1 D2 > [ 0.193979] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot > [ 0.195058] pci 0000:00:03.0: PCI bridge to [bus 0a-0a] > [ 0.195071] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] > [ 0.195205] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200 > [ 0.195229] pci 0000:09:00.0: reg 10: [io 0xd800-0xd8ff] > [ 0.195277] pci 0000:09:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit > pref] > [ 0.195304] pci 0000:09:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit > pref] > [ 0.195324] pci 0000:09:00.0: reg 30: [mem 0xf9ee0000-0xf9efffff pref] > [ 0.195430] pci 0000:09:00.0: supports D1 D2 > [ 0.195434] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.197018] pci 0000:00:05.0: PCI bridge to [bus 09-09] > [ 0.197030] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] > [ 0.197038] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] > [ 0.197049] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff > 64bit pref] > [ 0.197151] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200 > [ 0.197182] pci 0000:08:00.0: reg 10: [io 0xc800-0xc8ff] > [ 0.197222] pci 0000:08:00.0: reg 18: [mem 0xcfeff000-0xcfefffff 64bit > pref] > [ 0.197249] pci 0000:08:00.0: reg 20: [mem 0xcfef8000-0xcfefbfff 64bit > pref] > [ 0.197275] pci 0000:08:00.0: reg 30: [mem 0xf9de0000-0xf9dfffff pref] > [ 0.197375] pci 0000:08:00.0: supports D1 D2 > [ 0.197379] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.199002] pci 0000:00:06.0: PCI bridge to [bus 08-08] > [ 0.199012] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] > [ 0.199020] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] > [ 0.199030] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff > 64bit pref] > [ 0.199140] pci 0000:06:00.0: [104c:8231] type 1 class 0x000604 > [ 0.199335] pci 0000:06:00.0: supports D1 D2 > [ 0.199377] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You > can enable it with 'pcie_aspm=force' > [ 0.199396] pci 0000:00:0a.0: PCI bridge to [bus 06-07] > [ 0.199410] pci 0000:00:0a.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.199561] pci 0000:07:01.0: [1033:0035] type 0 class 0x000c03 > [ 0.199600] pci 0000:07:01.0: reg 10: [mem 0xf9cfd000-0xf9cfdfff] > [ 0.199735] pci 0000:07:01.0: Disabling memory decoding and releasing > memory resources. > [ 0.199803] pci 0000:07:01.0: supports D1 D2 > [ 0.199807] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot > [ 0.199864] pci 0000:07:01.1: [1033:0035] type 0 class 0x000c03 > [ 0.199910] pci 0000:07:01.1: reg 10: [mem 0xf9cfe000-0xf9cfefff] > [ 0.199978] pci 0000:07:01.1: Disabling memory decoding and releasing > memory resources. > [ 0.199978] pci 0000:07:01.1: supports D1 D2 > [ 0.199978] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot > [ 0.199978] pci 0000:07:01.2: [1033:00e0] type 0 class 0x000c03 > [ 0.199978] pci 0000:07:01.2: reg 10: [mem 0xf9cffc00-0xf9cffcff] > [ 0.199978] pci 0000:07:01.2: Disabling memory decoding and releasing > memory resources. > [ 0.199978] pci 0000:07:01.2: Rounding up size of resource #0 to 0x1000. > [ 0.199978] pci 0000:07:01.2: supports D1 D2 > [ 0.199978] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot > [ 0.199978] pci 0000:06:00.0: PCI bridge to [bus 07-07] > [ 0.199978] pci 0000:06:00.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.199978] pci 0000:05:00.0: [1002:95c5] type 0 class 0x000300 > [ 0.199978] pci 0000:05:00.0: reg 10: [mem 0xb0000000-0xbfffffff 64bit > pref] > [ 0.199978] pci 0000:05:00.0: reg 18: [mem 0xf9be0000-0xf9beffff 64bit] > [ 0.199978] pci 0000:05:00.0: reg 20: [io 0xb000-0xb0ff] > [ 0.199978] pci 0000:05:00.0: reg 30: [mem 0xf9bc0000-0xf9bdffff pref] > [ 0.199978] pci 0000:05:00.0: supports D1 D2 > [ 0.200017] pci 0000:05:00.1: [1002:aa28] type 0 class 0x000403 > [ 0.200060] pci 0000:05:00.1: reg 10: [mem 0xf9bfc000-0xf9bfffff 64bit] > [ 0.200240] pci 0000:05:00.1: supports D1 D2 > [ 0.202001] pci 0000:00:0b.0: PCI bridge to [bus 05-05] > [ 0.202011] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] > [ 0.202018] pci 0000:00:0b.0: bridge window [mem 0xf9b00000-0xf9bfffff] > [ 0.202029] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff > 64bit pref] > [ 0.202133] pci 0000:04:00.0: [9710:9990] type 0 class 0x000c03 > [ 0.202159] pci 0000:04:00.0: reg 10: [mem 0xf9af8000-0xf9af8fff] > [ 0.202354] pci 0000:04:00.0: supports D1 D2 > [ 0.202358] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot > [ 0.202426] pci 0000:04:00.1: [9710:9990] type 0 class 0x000c03 > [ 0.202452] pci 0000:04:00.1: reg 10: [mem 0xf9af9000-0xf9af9fff] > [ 0.202653] pci 0000:04:00.1: supports D1 D2 > [ 0.202658] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot > [ 0.202717] pci 0000:04:00.2: [9710:9990] type 0 class 0x000c03 > [ 0.202750] pci 0000:04:00.2: reg 10: [mem 0xf9afa000-0xf9afafff] > [ 0.202945] pci 0000:04:00.2: supports D1 D2 > [ 0.202949] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot > [ 0.202978] pci 0000:04:00.3: [9710:9990] type 0 class 0x000c03 > [ 0.202978] pci 0000:04:00.3: reg 10: [mem 0xf9afb000-0xf9afbfff] > [ 0.203054] pci 0000:04:00.3: supports D1 D2 > [ 0.203065] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot > [ 0.203124] pci 0000:04:00.4: [9710:9990] type 0 class 0x000c03 > [ 0.203185] pci 0000:04:00.4: reg 10: [mem 0xf9afc000-0xf9afcfff] > [ 0.203373] pci 0000:04:00.4: supports D1 D2 > [ 0.203380] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot > [ 0.203447] pci 0000:04:00.5: [9710:9990] type 0 class 0x000c03 > [ 0.203474] pci 0000:04:00.5: reg 10: [mem 0xf9afd000-0xf9afdfff] > [ 0.203675] pci 0000:04:00.5: supports D1 D2 > [ 0.203679] pci 0000:04:00.5: PME# supported from D0 D1 D2 D3hot > [ 0.203738] pci 0000:04:00.6: [9710:9990] type 0 class 0x000c03 > [ 0.203771] pci 0000:04:00.6: reg 10: [mem 0xf9afe000-0xf9afefff] > [ 0.203966] pci 0000:04:00.6: supports D1 D2 > [ 0.203970] pci 0000:04:00.6: PME# supported from D0 D1 D2 D3hot > [ 0.203977] pci 0000:04:00.7: [9710:9990] type 0 class 0x000c03 > [ 0.203977] pci 0000:04:00.7: reg 10: [mem 0xf9aff000-0xf9afffff] > [ 0.203977] pci 0000:04:00.7: supports D1 D2 > [ 0.203977] pci 0000:04:00.7: PME# supported from D0 D1 D2 D3hot > [ 0.205070] pci 0000:00:0d.0: PCI bridge to [bus 04-04] > [ 0.205085] pci 0000:00:0d.0: bridge window [mem 0xf9a00000-0xf9afffff] > [ 0.205152] pci 0000:03:06.0: [13f6:0111] type 0 class 0x000401 > [ 0.205194] pci 0000:03:06.0: reg 10: [io 0xa800-0xa8ff] > [ 0.205352] pci 0000:03:06.0: supports D1 D2 > [ 0.205432] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive > decode) > [ 0.205476] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] > [ 0.205488] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] > (subtractive decode) > [ 0.205494] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] > (subtractive decode) > [ 0.205500] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] > (subtractive decode) > [ 0.205506] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] > (subtractive decode) > [ 0.205512] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] > (subtractive decode) > [ 0.205518] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] > (subtractive decode) > [ 0.205604] pci 0000:00:15.0: PCI bridge to [bus 02-02] > [ 0.205687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.205926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT] > [ 0.205977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] > [ 0.205981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] > [ 0.206241] pci0000:00: Requesting ACPI _OSC control (0x1d) > [ 0.206571] pci0000:00: ACPI _OSC control (0x1d) granted > [ 0.233186] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) > [ 0.234003] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) > [ 0.234169] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) > [ 0.234321] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) > [ 0.234457] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) > [ 0.234559] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) > [ 0.234656] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) > [ 0.234755] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) > [ 0.235025] xen/balloon: Initialising balloon driver. > [ 0.235074] xen-balloon: Initialising balloon driver. > [ 0.235158] vgaarb: device added: > PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.235158] vgaarb: device added: > PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none > [ 0.235158] vgaarb: loaded > [ 0.235158] vgaarb: bridge control possible 0000:05:00.0 > [ 0.235158] vgaarb: bridge control possible 0000:0b:00.0 > [ 0.236066] SCSI subsystem initialized > [ 0.236086] libata version 3.00 loaded. > [ 0.236086] usbcore: registered new interface driver usbfs > [ 0.237032] usbcore: registered new interface driver hub > [ 0.237075] usbcore: registered new device driver usb > [ 0.237143] Advanced Linux Sound Architecture Driver Version 1.0.24. > [ 0.237143] PCI: Using ACPI for IRQ routing > [ 0.244971] PCI: pci_cache_line_size set to 64 bytes > [ 0.245035] reserve RAM buffer: 000000000009b000 - 000000000009ffff > [ 0.245158] NetLabel: Initializing > [ 0.245158] NetLabel: domain hash size = 128 > [ 0.245158] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.245158] NetLabel: unlabeled traffic allowed by default > [ 0.245313] Switching to clocksource xen > [ 0.245448] pnp: PnP ACPI init > [ 0.245448] ACPI: bus type pnp registered > [ 0.245494] pnp 00:00: [bus 00-ff] > [ 0.245499] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.245505] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 0.245509] pnp 00:00: [io 0x0d00-0xffff window] > [ 0.245514] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.245519] pnp 00:00: [mem 0x000d0000-0x000dffff window] > [ 0.245525] pnp 00:00: [mem 0xb0000000-0xdfffffff window] > [ 0.245530] pnp 00:00: [mem 0xf0000000-0xfebfffff window] > [ 0.245821] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > [ 0.245994] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.246000] pnp 00:01: [mem 0xfec20000-0xfec200ff] > [ 0.246266] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved > [ 0.246275] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.246402] pnp 00:02: [mem 0xf6000000-0xf6003fff] > [ 0.246646] system 00:02: [mem 0xf6000000-0xf6003fff] has been reserved > [ 0.246654] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.246939] pnp 00:03: [dma 4] > [ 0.246943] pnp 00:03: [io 0x0000-0x000f] > [ 0.246946] pnp 00:03: [io 0x0081-0x0083] > [ 0.246950] pnp 00:03: [io 0x0087] > [ 0.246954] pnp 00:03: [io 0x0089-0x008b] > [ 0.246957] pnp 00:03: [io 0x008f] > [ 0.246963] pnp 00:03: [io 0x00c0-0x00df] > [ 0.247167] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.247198] pnp 00:04: [io 0x0070-0x0071] > [ 0.247203] xen: registering gsi 8 triggering 1 polarity 0 > [ 0.247211] xen_map_pirq_gsi: returning irq 8 for gsi 8 > [ 0.247215] xen: --> pirq=8 -> irq=8 (gsi=8) > [ 0.247232] pnp 00:04: [irq 8] > [ 0.247433] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.247514] pnp 00:05: [io 0x0061] > [ 0.247753] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) > [ 0.247772] pnp 00:06: [io 0x00f0-0x00ff] > [ 0.247777] xen: registering gsi 13 triggering 1 polarity 0 > [ 0.247782] xen_map_pirq_gsi: returning irq 13 for gsi 13 > [ 0.247787] xen: --> pirq=13 -> irq=13 (gsi=13) > [ 0.247803] pnp 00:06: [irq 13] > [ 0.247999] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.248431] pnp 00:07: [io 0x03f8-0x03ff] > [ 0.248436] xen: registering gsi 4 triggering 1 polarity 0 > [ 0.248442] xen_map_pirq_gsi: returning irq 4 for gsi 4 > [ 0.248446] xen: --> pirq=4 -> irq=4 (gsi=4) > [ 0.248450] Already setup the GSI :4 > [ 0.248454] pnp 00:07: [irq 4] > [ 0.248457] pnp 00:07: [dma 0 disabled] > [ 0.248699] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) > [ 0.248860] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] > [ 0.248865] pnp 00:08: [io 0x0600-0x06df] > [ 0.248869] pnp 00:08: [io 0x0ae0-0x0aef] > [ 0.249198] system 00:08: [io 0x0600-0x06df] has been reserved > [ 0.249205] system 00:08: [io 0x0ae0-0x0aef] has been reserved > [ 0.249212] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.249265] pnp 00:09: [mem 0xfed00000-0xfed003ff] > [ 0.249479] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) > [ 0.249637] pnp 00:0a: [io 0x0060] > [ 0.249641] pnp 00:0a: [io 0x0064] > [ 0.249645] pnp 00:0a: [mem 0xfec00000-0xfec00fff] > [ 0.249649] pnp 00:0a: [mem 0xfee00000-0xfee00fff] > [ 0.249944] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.249951] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.249958] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.250244] pnp 00:0b: [io 0x0010-0x001f] > [ 0.250248] pnp 00:0b: [io 0x0022-0x003f] > [ 0.250255] pnp 00:0b: [io 0x0062-0x0063] > [ 0.250259] pnp 00:0b: [io 0x0065-0x006f] > [ 0.250263] pnp 00:0b: [io 0x0072-0x007f] > [ 0.250266] pnp 00:0b: [io 0x0080] > [ 0.250270] pnp 00:0b: [io 0x0084-0x0086] > [ 0.250274] pnp 00:0b: [io 0x0088] > [ 0.250277] pnp 00:0b: [io 0x008c-0x008e] > [ 0.250281] pnp 00:0b: [io 0x0090-0x009f] > [ 0.250284] pnp 00:0b: [io 0x00a2-0x00bf] > [ 0.250288] pnp 00:0b: [io 0x00b1] > [ 0.250292] pnp 00:0b: [io 0x00e0-0x00ef] > [ 0.250295] pnp 00:0b: [io 0x04d0-0x04d1] > [ 0.250299] pnp 00:0b: [io 0x040b] > [ 0.250303] pnp 00:0b: [io 0x04d6] > [ 0.250306] pnp 00:0b: [io 0x0c00-0x0c01] > [ 0.250317] pnp 00:0b: [io 0x0c14] > [ 0.250320] pnp 00:0b: [io 0x0c50-0x0c51] > [ 0.250324] pnp 00:0b: [io 0x0c52] > [ 0.250327] pnp 00:0b: [io 0x0c6c] > [ 0.250331] pnp 00:0b: [io 0x0c6f] > [ 0.250334] pnp 00:0b: [io 0x0cd0-0x0cd1] > [ 0.250338] pnp 00:0b: [io 0x0cd2-0x0cd3] > [ 0.250342] pnp 00:0b: [io 0x0cd4-0x0cd5] > [ 0.250346] pnp 00:0b: [io 0x0cd6-0x0cd7] > [ 0.250349] pnp 00:0b: [io 0x0cd8-0x0cdf] > [ 0.250353] pnp 00:0b: [io 0x0800-0x089f] > [ 0.250357] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] > [ 0.250362] pnp 00:0b: [io 0x0b00-0x0b1f] > [ 0.250365] pnp 00:0b: [io 0x0b20-0x0b3f] > [ 0.250369] pnp 00:0b: [io 0x0900-0x090f] > [ 0.250373] pnp 00:0b: [io 0x0910-0x091f] > [ 0.250377] pnp 00:0b: [io 0xfe00-0xfefe] > [ 0.250380] pnp 00:0b: [io 0x0060] > [ 0.250384] pnp 00:0b: [io 0x0064] > [ 0.250388] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.250393] pnp 00:0b: [mem 0xffb80000-0xffbfffff] > [ 0.250404] pnp 00:0b: [mem 0xfec10000-0xfec1001f] > [ 0.250408] pnp 00:0b: [mem 0xfed80000-0xfed80fff] > [ 0.250412] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] > [ 0.250790] system 00:0b: [io 0x04d0-0x04d1] has been reserved > [ 0.250796] system 00:0b: [io 0x040b] has been reserved > [ 0.250801] system 00:0b: [io 0x04d6] has been reserved > [ 0.250806] system 00:0b: [io 0x0c00-0x0c01] has been reserved > [ 0.250811] system 00:0b: [io 0x0c14] has been reserved > [ 0.250816] system 00:0b: [io 0x0c50-0x0c51] has been reserved > [ 0.250821] system 00:0b: [io 0x0c52] has been reserved > [ 0.250826] system 00:0b: [io 0x0c6c] has been reserved > [ 0.250838] system 00:0b: [io 0x0c6f] has been reserved > [ 0.250843] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved > [ 0.250848] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved > [ 0.250853] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved > [ 0.250859] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved > [ 0.250864] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved > [ 0.250869] system 00:0b: [io 0x0800-0x089f] has been reserved > [ 0.250874] system 00:0b: [io 0x0b00-0x0b1f] has been reserved > [ 0.250879] system 00:0b: [io 0x0b20-0x0b3f] has been reserved > [ 0.250885] system 00:0b: [io 0x0900-0x090f] has been reserved > [ 0.250890] system 00:0b: [io 0x0910-0x091f] has been reserved > [ 0.250895] system 00:0b: [io 0xfe00-0xfefe] has been reserved > [ 0.250901] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved > [ 0.250907] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved > [ 0.250912] system 00:0b: [mem 0xfed80000-0xfed80fff] has been reserved > [ 0.250927] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.251015] pnp 00:0c: [mem 0xe0000000-0xefffffff] > [ 0.251333] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.251342] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.251569] pnp 00:0d: [mem 0x00000000-0x0009ffff] > [ 0.251573] pnp 00:0d: [mem 0x000c0000-0x000cffff] > [ 0.251578] pnp 00:0d: [mem 0x000e0000-0x000fffff] > [ 0.251582] pnp 00:0d: [mem 0x00100000-0xafffffff] > [ 0.251586] pnp 00:0d: [mem 0xfec00000-0xffffffff] > [ 0.251927] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved > [ 0.251934] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved > [ 0.251939] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved > [ 0.251945] system 00:0d: [mem 0x00100000-0xafffffff] could not be reserved > [ 0.251952] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved > [ 0.251960] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.252199] pnp: PnP ACPI: found 14 devices > [ 0.252203] ACPI: ACPI bus type pnp unregistered > [ 0.254401] pciback 0000:0a:00.0: seizing device > [ 0.254487] pciback 0000:0a:00.1: seizing device > [ 0.254566] pciback 0000:0a:00.2: seizing device > [ 0.254639] pciback 0000:0a:00.3: seizing device > [ 0.254746] pciback 0000:0a:00.4: seizing device > [ 0.254825] pciback 0000:0a:00.5: seizing device > [ 0.254907] pciback 0000:0a:00.6: seizing device > [ 0.254982] pciback 0000:0a:00.7: seizing device > [ 0.255296] pciback 0000:07:01.0: seizing device > [ 0.255375] pciback 0000:07:01.1: seizing device > [ 0.255455] pciback 0000:07:01.2: seizing device > [ 0.255529] pciback 0000:05:00.0: seizing device > [ 0.255608] pciback 0000:05:00.1: seizing device > [ 0.255690] pciback 0000:04:00.0: seizing device > [ 0.255762] pciback 0000:04:00.1: seizing device > [ 0.255842] pciback 0000:04:00.2: seizing device > [ 0.255922] pciback 0000:04:00.3: seizing device > [ 0.256001] pciback 0000:04:00.4: seizing device > [ 0.256117] pciback 0000:04:00.5: seizing device > [ 0.256192] pciback 0000:04:00.6: seizing device > [ 0.256274] pciback 0000:04:00.7: seizing device > [ 0.256353] pciback 0000:03:06.0: seizing device > [ 0.266456] PM-Timer failed consistency check (0x0xffffff) - aborting. > [ 0.266551] PCI: max bus depth: 2 pci_try_num: 3 > [ 0.266657] pci 0000:00:02.0: PCI bridge to [bus 0b-0b] > [ 0.266664] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] > [ 0.266673] pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfe9fffff] > [ 0.266681] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff > 64bit pref] > [ 0.266700] pci 0000:00:03.0: PCI bridge to [bus 0a-0a] > [ 0.266708] pci 0000:00:03.0: bridge window [mem 0xf9f00000-0xf9ffffff] > [ 0.266721] pci 0000:00:05.0: PCI bridge to [bus 09-09] > [ 0.266727] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff] > [ 0.266735] pci 0000:00:05.0: bridge window [mem 0xf9e00000-0xf9efffff] > [ 0.266743] pci 0000:00:05.0: bridge window [mem 0xcff00000-0xcfffffff > 64bit pref] > [ 0.266754] pci 0000:00:06.0: PCI bridge to [bus 08-08] > [ 0.266760] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] > [ 0.266769] pci 0000:00:06.0: bridge window [mem 0xf9d00000-0xf9dfffff] > [ 0.266783] pci 0000:00:06.0: bridge window [mem 0xcfe00000-0xcfefffff > 64bit pref] > [ 0.266796] pciback 0000:07:01.0: BAR 0: assigned [mem > 0xf9c00000-0xf9c00fff] > [ 0.266808] pciback 0000:07:01.1: BAR 0: assigned [mem > 0xf9c01000-0xf9c01fff] > [ 0.266818] pciback 0000:07:01.2: BAR 0: assigned [mem > 0xf9c02000-0xf9c02fff] > [ 0.266829] pci 0000:06:00.0: PCI bridge to [bus 07-07] > [ 0.266840] pci 0000:06:00.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.266858] pci 0000:00:0a.0: PCI bridge to [bus 06-07] > [ 0.266873] pci 0000:00:0a.0: bridge window [mem 0xf9c00000-0xf9cfffff] > [ 0.266887] pci 0000:00:0b.0: PCI bridge to [bus 05-05] > [ 0.266892] pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff] > [ 0.266901] pci 0000:00:0b.0: bridge window [mem 0xf9b00000-0xf9bfffff] > [ 0.266909] pci 0000:00:0b.0: bridge window [mem 0xb0000000-0xbfffffff > 64bit pref] > [ 0.266920] pci 0000:00:0d.0: PCI bridge to [bus 04-04] > [ 0.266929] pci 0000:00:0d.0: bridge window [mem 0xf9a00000-0xf9afffff] > [ 0.266942] pci 0000:00:14.4: PCI bridge to [bus 03-03] > [ 0.266956] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] > [ 0.266976] pci 0000:00:15.0: PCI bridge to [bus 02-02] > [ 0.267004] xen: registering gsi 52 triggering 0 polarity 1 > [ 0.267020] xen: --> pirq=52 -> irq=52 (gsi=52) > [ 0.267048] xen: registering gsi 52 triggering 0 polarity 1 > [ 0.267076] xen_map_pirq_gsi: returning irq 52 for gsi 52 > [ 0.267081] xen: --> pirq=52 -> irq=52 (gsi=52) > [ 0.267085] Already setup the GSI :52 > [ 0.267095] xen: registering gsi 52 triggering 0 polarity 1 > [ 0.267100] xen_map_pirq_gsi: returning irq 52 for gsi 52 > [ 0.267105] xen: --> pirq=52 -> irq=52 (gsi=52) > [ 0.267109] Already setup the GSI :52 > [ 0.267118] xen: registering gsi 53 triggering 0 polarity 1 > [ 0.267164] xen: --> pirq=53 -> irq=53 (gsi=53) > [ 0.267181] xen: registering gsi 54 triggering 0 polarity 1 > [ 0.267191] xen: --> pirq=54 -> irq=54 (gsi=54) > [ 0.267215] xen: registering gsi 54 triggering 0 polarity 1 > [ 0.267220] xen_map_pirq_gsi: returning irq 54 for gsi 54 > [ 0.267225] xen: --> pirq=54 -> irq=54 (gsi=54) > [ 0.267229] Already setup the GSI :54 > [ 0.267239] xen: registering gsi 54 triggering 0 polarity 1 > [ 0.267243] xen_map_pirq_gsi: returning irq 54 for gsi 54 > [ 0.267248] xen: --> pirq=54 -> irq=54 (gsi=54) > [ 0.267252] Already setup the GSI :54 > [ 0.267270] xen: registering gsi 16 triggering 0 polarity 1 > [ 0.267280] xen: --> pirq=16 -> irq=16 (gsi=16) > [ 0.267302] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.267307] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.267311] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.267316] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.267321] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xdfffffff] > [ 0.267326] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] > [ 0.267331] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff] > [ 0.267335] pci_bus 0000:0b: resource 1 [mem 0xfa000000-0xfe9fffff] > [ 0.267340] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xdfffffff 64bit > pref] > [ 0.267346] pci_bus 0000:0a: resource 1 [mem 0xf9f00000-0xf9ffffff] > [ 0.267351] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] > [ 0.267355] pci_bus 0000:09: resource 1 [mem 0xf9e00000-0xf9efffff] > [ 0.267360] pci_bus 0000:09: resource 2 [mem 0xcff00000-0xcfffffff 64bit > pref] > [ 0.267366] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] > [ 0.267370] pci_bus 0000:08: resource 1 [mem 0xf9d00000-0xf9dfffff] > [ 0.267375] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff 64bit > pref] > [ 0.267388] pci_bus 0000:06: resource 1 [mem 0xf9c00000-0xf9cfffff] > [ 0.267393] pci_bus 0000:07: resource 1 [mem 0xf9c00000-0xf9cfffff] > [ 0.267398] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] > [ 0.267402] pci_bus 0000:05: resource 1 [mem 0xf9b00000-0xf9bfffff] > [ 0.267407] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xbfffffff 64bit > pref] > [ 0.267413] pci_bus 0000:04: resource 1 [mem 0xf9a00000-0xf9afffff] > [ 0.267418] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] > [ 0.267422] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] > [ 0.267427] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] > [ 0.267431] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.267436] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] > [ 0.267441] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xdfffffff] > [ 0.267446] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] > [ 0.267504] NET: Registered protocol family 2 > [ 0.267823] IP route cache hash table entries: 32768 (order: 6, 262144 > bytes) > [ 0.268951] TCP established hash table entries: 131072 (order: 9, 2097152 > bytes) > [ 0.270481] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) > [ 0.278788] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.278811] TCP reno registered > [ 0.278846] UDP hash table entries: 512 (order: 4, 81920 bytes) > [ 0.278995] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes) > [ 0.279304] NET: Registered protocol family 1 > [ 0.279601] RPC: Registered named UNIX socket transport module. > [ 0.279641] RPC: Registered udp transport module. > [ 0.279645] RPC: Registered tcp transport module. > [ 0.279649] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.568176] pci 0000:0b:00.0: Boot video device > [ 0.568355] pci 0000:06:00.0: TI XIO2000a quirk detected; secondary bus > fast back-to-back transfers disabled > [ 0.568573] PCI: CLS 64 bytes, default 64 > [ 0.568704] Trying to unpack rootfs image as initramfs... > [ 0.582105] Freeing initrd memory: 6724k freed > [ 0.587967] DMA-API: preallocated 32768 debug entries > [ 0.587978] DMA-API: debugging enabled by kernel config > [ 0.590485] microcode: CPU0: patch_level=0x010000bf > [ 0.590512] microcode: CPU1: patch_level=0x010000bf > [ 0.590555] microcode: CPU2: patch_level=0x010000bf > [ 0.590632] microcode: CPU3: patch_level=0x010000bf > [ 0.590724] microcode: CPU4: patch_level=0x010000bf > [ 0.590799] microcode: CPU5: patch_level=0x010000bf > [ 0.590952] microcode: Microcode Update Driver: v2.00 > <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba > [ 0.591823] Intel AES-NI instructions are not detected. > [ 0.592331] audit: initializing netlink socket (disabled) > [ 0.592371] type=2000 audit(1326371114.069:1): initialized > [ 0.613325] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.623529] VFS: Disk quotas dquot_6.5.2 > [ 0.623768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.626441] NTFS driver 2.1.30 [Flags: R/W]. > [ 0.626815] fuse init (API version 7.17) > [ 0.628471] Btrfs loaded > [ 0.628483] msgmni has been set to 1829 > [ 0.628851] SELinux: Registering netfilter hooks > [ 0.630559] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 0.630575] io scheduler noop registered > [ 0.630579] io scheduler deadline registered > [ 0.630709] io scheduler cfq registered (default) > [ 0.630715] start plist test > [ 0.631700] end plist test > [ 0.631704] list_sort_test: start testing list_sort() > [ 0.635935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.636239] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.636541] usbcore: registered new interface driver udlfb > [ 0.636651] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 > [ 0.636657] vesafb: scrolling: redraw > [ 0.636661] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 0.639640] vesafb: framebuffer at 0xfb000000, mapped to > 0xffffc90010880000, using 10240k, total 14336k > [ 0.661272] Console: switching to colour frame buffer device 160x64 > [ 0.681729] fb0: VESA VGA frame buffer device > [ 0.682268] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 0.682480] ACPI: Power Button [PWRB] > [ 0.682756] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.682939] ACPI: Power Button [PWRF] > [ 0.687848] Event-channel device installed. > [ 0.688305] xen: registering gsi 22 triggering 0 polarity 1 > [ 0.688462] xen: --> pirq=22 -> irq=22 (gsi=22) > [ 0.688652] xen: registering gsi 43 triggering 0 polarity 1 > [ 0.688806] xen: --> pirq=43 -> irq=43 (gsi=43) > [ 0.688982] xen: registering gsi 43 triggering 0 polarity 1 > [ 0.689139] xen_map_pirq_gsi: returning irq 43 for gsi 43 > [ 0.689276] xen: --> pirq=43 -> irq=43 (gsi=43) > [ 0.689398] Already setup the GSI :43 > [ 0.689540] xen: registering gsi 42 triggering 0 polarity 1 > [ 0.689716] xen: --> pirq=42 -> irq=42 (gsi=42) > [ 0.689893] xen: registering gsi 42 triggering 0 polarity 1 > [ 0.690041] xen_map_pirq_gsi: returning irq 42 for gsi 42 > [ 0.690134] xen: --> pirq=42 -> irq=42 (gsi=42) > [ 0.690308] Already setup the GSI :42 > [ 0.690457] xen: registering gsi 41 triggering 0 polarity 1 > [ 0.690610] xen: --> pirq=41 -> irq=41 (gsi=41) > [ 0.690785] xen: registering gsi 41 triggering 0 polarity 1 > [ 0.690927] xen_map_pirq_gsi: returning irq 41 for gsi 41 > [ 0.691098] xen: --> pirq=41 -> irq=41 (gsi=41) > [ 0.691218] Already setup the GSI :41 > [ 0.691361] xen: registering gsi 40 triggering 0 polarity 1 > [ 0.691516] xen: --> pirq=40 -> irq=40 (gsi=40) > [ 0.691691] xen: registering gsi 40 triggering 0 polarity 1 > [ 0.691839] xen_map_pirq_gsi: returning irq 40 for gsi 40 > [ 0.691983] xen: --> pirq=40 -> irq=40 (gsi=40) > [ 0.692103] Already setup the GSI :40 > [ 0.692247] xen: registering gsi 33 triggering 0 polarity 1 > [ 0.692395] xen: --> pirq=33 -> irq=33 (gsi=33) > [ 0.698730] pciback 0000:05:00.0: enabling device (0000 -> 0003) > [ 0.699683] xen: registering gsi 32 triggering 0 polarity 1 > [ 0.711332] xen: --> pirq=32 -> irq=32 (gsi=32) > [ 0.717614] pciback 0000:07:01.2: enabling device (0114 -> 0116) > [ 0.718576] xen: registering gsi 46 triggering 0 polarity 1 > [ 0.730341] xen: --> pirq=46 -> irq=46 (gsi=46) > [ 0.736752] pciback 0000:07:01.1: enabling device (0114 -> 0116) > [ 0.737711] xen: registering gsi 45 triggering 0 polarity 1 > [ 0.749678] xen: --> pirq=45 -> irq=45 (gsi=45) > [ 0.756061] pciback 0000:07:01.0: enabling device (0114 -> 0116) > [ 0.757003] xen: registering gsi 44 triggering 0 polarity 1 > [ 0.769033] xen: --> pirq=44 -> irq=44 (gsi=44) > [ 0.775579] xen: registering gsi 31 triggering 0 polarity 1 > [ 0.782167] xen: --> pirq=31 -> irq=31 (gsi=31) > [ 0.788821] xen: registering gsi 31 triggering 0 polarity 1 > [ 0.795438] xen_map_pirq_gsi: returning irq 31 for gsi 31 > [ 0.796434] xen: --> pirq=31 -> irq=31 (gsi=31) > [ 0.808579] Already setup the GSI :31 > [ 0.815143] xen: registering gsi 30 triggering 0 polarity 1 > [ 0.821685] xen: --> pirq=30 -> irq=30 (gsi=30) > [ 0.828206] xen: registering gsi 30 triggering 0 polarity 1 > [ 0.834740] xen_map_pirq_gsi: returning irq 30 for gsi 30 > [ 0.841088] xen: --> pirq=30 -> irq=30 (gsi=30) > [ 0.841258] Already setup the GSI :30 > [ 0.841323] xen: registering gsi 29 triggering 0 polarity 1 > [ 0.841332] xen: --> pirq=29 -> irq=29 (gsi=29) > [ 0.841423] xen: registering gsi 29 triggering 0 polarity 1 > [ 0.841425] xen_map_pirq_gsi: returning irq 29 for gsi 29 > [ 0.841426] xen: --> pirq=29 -> irq=29 (gsi=29) > [ 0.841427] Already setup the GSI :29 > [ 0.841504] xen: registering gsi 28 triggering 0 polarity 1 > [ 0.841512] xen: --> pirq=28 -> irq=28 (gsi=28) > [ 0.841597] xen: registering gsi 28 triggering 0 polarity 1 > [ 0.841599] xen_map_pirq_gsi: returning irq 28 for gsi 28 > [ 0.841600] xen: --> pirq=28 -> irq=28 (gsi=28) > [ 0.841602] Already setup the GSI :28 > [ 0.841796] xen-pciback: backend is passthrough > [ 0.843175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.968633] hpet_acpi_add: no address or irqs in _CRS > [ 0.974946] Non-volatile memory driver v1.3 > [ 0.975933] Linux agpgart interface v0.103 > [ 0.989830] [drm] Initialized drm 1.1.0 20060810 > [ 0.990807] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp > module! > [ 1.002136] i2c-core: driver [ch7006] using legacy suspend method > [ 1.003131] i2c-core: driver [ch7006] using legacy resume method > [ 1.019267] brd: module loaded > [ 1.041714] loop: module loaded > [ 1.049261] ahci 0000:00:11.0: version 3.0 > [ 1.050245] xen: registering gsi 19 triggering 0 polarity 1 > [ 1.061428] xen: --> pirq=19 -> irq=19 (gsi=19) > [ 1.067690] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f > impl SATA mode > [ 1.073913] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp > pio slum part > [ 1.083160] scsi0 : ahci > [ 1.089730] scsi1 : ahci > [ 1.096185] scsi2 : ahci > [ 1.102635] scsi3 : ahci > [ 1.108913] scsi4 : ahci > [ 1.115086] scsi5 : ahci > [ 1.121331] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 > irq 342 > [ 1.122275] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 > irq 342 > [ 1.122275] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 > irq 342 > [ 1.122275] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 > irq 342 > [ 1.122275] ata5: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff300 > irq 342 > [ 1.122275] ata6: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff380 > irq 342 > [ 1.156239] tun: Universal TUN/TAP device driver, 1.6 > [ 1.157234] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > [ 1.167296] e1000: Intel(R) PRO/1000 Network Driver - version > 7.3.21-k8-NAPI > [ 1.168288] e1000: Copyright (c) 1999-2006 Intel Corporation. > [ 1.178258] sky2: driver version 1.30 > [ 1.184032] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.185019] xen: registering gsi 46 triggering 0 polarity 1 > [ 1.194899] xen_map_pirq_gsi: returning irq 46 for gsi 46 > [ 1.195889] xen: --> pirq=46 -> irq=46 (gsi=46) > [ 1.205721] Already setup the GSI :46 > [ 1.212142] r8169 0000:09:00.0: eth0: RTL8168d/8111d at > 0xffffc900001f8000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 343 > [ 1.213061] r8169 0000:09:00.0: eth0: jumbo features [frames: 9200 bytes, > tx checksumming: ko] > [ 1.223683] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.229362] xen: registering gsi 51 triggering 0 polarity 1 > [ 1.235058] xen: --> pirq=51 -> irq=51 (gsi=51) > [ 1.241802] r8169 0000:08:00.0: eth1: RTL8168d/8111d at > 0xffffc900001fa000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 344 > [ 1.242278] r8169 0000:08:00.0: eth1: jumbo features [frames: 9200 bytes, > tx checksumming: ko] > [ 1.255129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 1.256099] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 > [ 1.267332] xen: registering gsi 17 triggering 0 polarity 1 > [ 1.273357] xen: --> pirq=17 -> irq=17 (gsi=17) > [ 1.279398] ehci_hcd 0000:00:12.2: EHCI Host Controller > [ 1.285489] drivers/usb/core/inode.c: creating file 'devices' > [ 1.286464] drivers/usb/core/inode.c: creating file '001' > [ 1.297803] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus > number 1 > [ 1.298786] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 > pcc=5 ordered !ppc ports=5 > [ 1.298786] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes > 256/512/1024 > [ 1.316312] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 1.322751] QUIRK: Enable AMD PLL fix > [ 1.323658] ehci_hcd 0000:00:12.2: debug port 1 > [ 1.323658] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 1.323658] ehci_hcd 0000:00:12.2: MWI active > [ 1.323658] ehci_hcd 0000:00:12.2: supports USB remote wakeup > [ 1.354124] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400 > [ 1.355084] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 > period=512 RUN > [ 1.373082] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 > [ 1.379498] usb usb1: default language 0x0409 > [ 1.385764] usb usb1: udev 1, busnum 1, minor = 0 > [ 1.386714] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.386714] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.386714] usb usb1: Product: EHCI Host Controller > [ 1.386714] usb usb1: Manufacturer: Linux 3.2.0-rc0+ ehci_hcd > [ 1.386714] usb usb1: SerialNumber: 0000:00:12.2 > [ 1.423538] usb usb1: usb_probe_device > [ 1.424524] usb usb1: configuration #1 chosen from 1 choice > [ 1.435957] usb usb1: adding 1-0:1.0 (config #1, interface 0) > [ 1.442260] hub 1-0:1.0: usb_probe_interface > [ 1.443216] hub 1-0:1.0: usb_probe_interface - got id > [ 1.443216] hub 1-0:1.0: USB hub found > [ 1.460190] ata2: SATA link down (SStatus 0 SControl 300) > [ 1.460255] ata4: SATA link down (SStatus 0 SControl 300) > [ 1.460324] ata5: SATA link down (SStatus 0 SControl 300) > [ 1.460368] ata6: SATA link down (SStatus 0 SControl 300) > [ 1.485187] hub 1-0:1.0: 5 ports detected > [ 1.486169] hub 1-0:1.0: standalone hub > [ 1.486169] hub 1-0:1.0: no power switching (usb 1.0) > [ 1.486169] hub 1-0:1.0: individual port over-current protection > [ 1.486169] hub 1-0:1.0: power on to power good time: 20ms > [ 1.516387] hub 1-0:1.0: local power source is good > [ 1.517362] hub 1-0:1.0: trying to enable port power on non-switchable hub > [ 1.529111] drivers/usb/core/inode.c: creating file '001' > [ 1.535704] xen: registering gsi 17 triggering 0 polarity 1 > [ 1.541968] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 1.542960] xen: --> pirq=17 -> irq=17 (gsi=17) > [ 1.554529] Already setup the GSI :17 > [ 1.560740] ehci_hcd 0000:00:13.2: EHCI Host Controller > [ 1.567004] drivers/usb/core/inode.c: creating file '002' > [ 1.573460] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus > number 2 > [ 1.574437] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 > pcc=5 ordered !ppc ports=5 > [ 1.586197] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes > 256/512/1024 > [ 1.587186] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 1.587186] ehci_hcd 0000:00:13.2: debug port 1 > [ 1.587186] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 1.611261] ehci_hcd 0000:00:13.2: MWI active > [ 1.615122] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 1.615168] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.612232] ehci_hcd 0000:00:13.2: supports USB remote wakeup > [ 1.635307] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800 > [ 1.640113] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 > period=512 RUN > [ 1.641216] ata3.00: ATA-8: ST2000DL003-9VT166, CC45, max UDMA/133 > [ 1.641219] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ 1.641275] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 > [ 1.641402] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 > [ 1.641404] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), > AA > [ 1.642032] ata3.00: configured for UDMA/133 > [ 1.642932] ata1.00: configured for UDMA/133 > [ 1.643199] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO > PQ: 0 ANSI: 5 > [ 1.643742] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 > TB/1.81 TiB) > [ 1.643854] sd 0:0:0:0: [sda] Write Protect is off > [ 1.643859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.643932] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.648079] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 > [ 1.648158] usb usb2: default language 0x0409 > [ 1.648170] usb usb2: udev 1, busnum 2, minor = 128 > [ 1.648171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.648173] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.648174] usb usb2: Product: EHCI Host Controller > [ 1.648176] usb usb2: Manufacturer: Linux 3.2.0-rc0+ ehci_hcd > [ 1.648177] usb usb2: SerialNumber: 0000:00:13.2 > [ 1.757176] usb usb2: usb_probe_device > [ 1.757258] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 1.757593] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC45 > PQ: 0 ANSI: 5 > [ 1.758098] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 > TB/1.81 TiB) > [ 1.758100] sd 2:0:0:0: [sdb] 4096-byte physical blocks > [ 1.758215] sd 2:0:0:0: [sdb] Write Protect is off > [ 1.758217] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 1.758263] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 1.759160] sd 2:0:0:0: Attached scsi generic sg1 type 0 > [ 1.758596] usb usb2: configuration #1 chosen from 1 choice > [ 1.819655] usb usb2: adding 2-0:1.0 (config #1, interface 0) > [ 1.819717] sdb: sdb1 > [ 1.819735] sda: sda1 sda2 sda3 > [ 1.839865] hub 2-0:1.0: usb_probe_interface > [ 1.840527] sd 2:0:0:0: [sdb] Attached SCSI disk > [ 1.840620] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.859118] hub 2-0:1.0: usb_probe_interface - got id > [ 1.859118] hub 2-0:1.0: USB hub found > [ 1.859527] hub 2-0:1.0: 5 ports detected > [ 1.859529] hub 2-0:1.0: standalone hub > [ 1.859530] hub 2-0:1.0: no power switching (usb 1.0) > [ 1.859532] hub 2-0:1.0: individual port over-current protection > [ 1.859533] hub 2-0:1.0: power on to power good time: 20ms > [ 1.859543] hub 2-0:1.0: local power source is good > [ 1.859545] hub 2-0:1.0: trying to enable port power on non-switchable hub > [ 1.859620] drivers/usb/core/inode.c: creating file '001' > [ 1.859930] xen: registering gsi 17 triggering 0 polarity 1 > [ 1.859935] xen_map_pirq_gsi: returning irq 17 for gsi 17 > [ 1.859937] xen: --> pirq=17 -> irq=17 (gsi=17) > [ 1.859939] Already setup the GSI :17 > [ 1.860013] ehci_hcd 0000:00:16.2: EHCI Host Controller > [ 1.860025] drivers/usb/core/inode.c: creating file '003' > [ 1.860433] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus > number 3 > [ 1.860441] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 > pcc=4 ordered !ppc ports=4 > [ 1.860444] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes > 256/512/1024 > [ 1.860449] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 > EHCI dummy qh workaround > [ 1.860537] ehci_hcd 0000:00:16.2: debug port 1 > [ 1.860542] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 > ithresh=8 period=1024 Reset HALT > [ 1.860565] ehci_hcd 0000:00:16.2: MWI active > [ 1.860566] ehci_hcd 0000:00:16.2: supports USB remote wakeup > [ 1.860575] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00 > [ 1.860579] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 > period=512 RUN > [ 1.867096] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 > [ 1.867169] usb usb3: default language 0x0409 > [ 1.867182] usb usb3: udev 1, busnum 3, minor = 256 > [ 1.867184] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > [ 1.867185] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.867187] usb usb3: Product: EHCI Host Controller > [ 1.867189] usb usb3: Manufacturer: Linux 3.2.0-rc0+ ehci_hcd > [ 1.867190] usb usb3: SerialNumber: 0000:00:16.2 > [ 1.867391] usb usb3: usb_probe_device > [ 1.867393] usb usb3: configuration #1 chosen from 1 choice > [ 1.867413] usb usb3: adding 3-0:1.0 (config #1, interface 0) > [ 1.867535] hub 3-0:1.0: usb_probe_interface > [ 1.867537] hub 3-0:1.0: usb_probe_interface - got id > [ 1.867538] hub 3-0:1.0: USB hub found > [ 1.867545] hub 3-0:1.0: 4 ports detected > [ 1.867546] hub 3-0:1.0: standalone hub > [ 1.867547] hub 3-0:1.0: no power switching (usb 1.0) > [ 1.867549] hub 3-0:1.0: individual port over-current protection > [ 1.867550] hub 3-0:1.0: power on to power good time: 20ms > [ 1.867559] hub 3-0:1.0: local power source is good > [ 1.867561] hub 3-0:1.0: trying to enable port power on non-switchable hub > [ 1.867618] drivers/usb/core/inode.c: creating file '001' > [ 1.868048] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 1.868051] ohci_hcd: block sizes: ed 80 td 96 > [ 1.868168] xen: registering gsi 18 triggering 0 polarity 1 > [ 1.868192] xen: --> pirq=18 -> irq=18 (gsi=18) > [ 1.868228] ohci_hcd 0000:00:12.0: OHCI Host Controller > [ 1.868244] drivers/usb/core/inode.c: creating file '004' > [ 1.868657] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus > number 4 > [ 1.868672] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk > [ 1.868741] ohci_hcd 0000:00:12.0: created debug files > [ 1.868743] ohci_hcd 0000:00:12.0: supports USB remote wakeup > [ 1.868802] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf98fb000 > [ 1.924206] ohci_hcd 0000:00:12.0: OHCI controller state > [ 1.924213] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, > rh state running > [ 1.924217] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational > CBSR=3 > [ 1.924220] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 > [ 1.924224] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF > [ 1.924227] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH > [ 1.924237] ohci_hcd 0000:00:12.0: hcca frame #0005 > [ 1.924241] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS > NDP=5(5) > [ 1.924257] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 > [ 1.924260] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE > [ 1.924264] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS > [ 1.924267] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS > [ 1.924271] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS > [ 1.924274] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS > [ 1.924278] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS > [ 1.924300] usb usb4: default language 0x0409 > [ 1.924312] usb usb4: udev 1, busnum 4, minor = 384 > [ 1.924314] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.924316] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.924317] usb usb4: Product: OHCI Host Controller > [ 1.924319] usb usb4: Manufacturer: Linux 3.2.0-rc0+ ohci_hcd > [ 1.924320] usb usb4: SerialNumber: 0000:00:12.0 > [ 1.924796] usb usb4: usb_probe_device > [ 1.924798] usb usb4: configuration #1 chosen from 1 choice > [ 1.924810] usb usb4: adding 4-0:1.0 (config #1, interface 0) > [ 1.924931] hub 4-0:1.0: usb_probe_interface > [ 1.924933] hub 4-0:1.0: usb_probe_interface - got id > [ 1.924935] hub 4-0:1.0: USB hub found > [ 1.924954] hub 4-0:1.0: 5 ports detected > [ 1.924955] hub 4-0:1.0: standalone hub > [ 1.924956] hub 4-0:1.0: no power switching (usb 1.0) > [ 1.924957] hub 4-0:1.0: no over-current protection > [ 1.924959] hub 4-0:1.0: power on to power good time: 4ms > [ 1.924969] hub 4-0:1.0: local power source is good > [ 1.924970] hub 4-0:1.0: trying to enable port power on non-switchable hub > [ 1.925009] drivers/usb/core/inode.c: creating file '001' > [ 1.925093] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0 > [ 1.925398] xen: registering gsi 18 triggering 0 polarity 1 > [ 1.925402] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 1.925404] xen: --> pirq=18 -> irq=18 (gsi=18) > [ 1.925406] Already setup the GSI :18 > [ 1.925425] ohci_hcd 0000:00:13.0: OHCI Host Controller > [ 1.925437] drivers/usb/core/inode.c: creating file '005' > [ 1.925693] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus > number 5 > [ 1.925705] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk > [ 1.925769] ohci_hcd 0000:00:13.0: created debug files > [ 1.925771] ohci_hcd 0000:00:13.0: supports USB remote wakeup > [ 1.925778] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf98fc000 > [ 1.960158] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 > [ 1.968219] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 > [ 1.981168] ohci_hcd 0000:00:13.0: OHCI controller state > [ 1.981173] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, > rh state running > [ 1.981177] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational > CBSR=3 > [ 1.981180] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 > [ 1.981193] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF > [ 1.981196] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH > [ 1.981207] ohci_hcd 0000:00:13.0: hcca frame #0005 > [ 1.981211] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS > NDP=5(5) > [ 1.981214] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 > [ 1.981217] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE > [ 1.981221] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS > [ 1.981224] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS > [ 1.981227] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS > [ 1.981231] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS > [ 1.981234] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS > [ 1.981256] usb usb5: default language 0x0409 > [ 1.981279] usb usb5: udev 1, busnum 5, minor = 512 > [ 1.981281] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > [ 1.981282] usb usb5: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.981284] usb usb5: Product: OHCI Host Controller > [ 1.981285] usb usb5: Manufacturer: Linux 3.2.0-rc0+ ohci_hcd > [ 1.981287] usb usb5: SerialNumber: 0000:00:13.0 > [ 1.981629] usb usb5: usb_probe_device > [ 1.981631] usb usb5: configuration #1 chosen from 1 choice > [ 1.981641] usb usb5: adding 5-0:1.0 (config #1, interface 0) > [ 1.981786] hub 5-0:1.0: usb_probe_interface > [ 1.981788] hub 5-0:1.0: usb_probe_interface - got id > [ 1.981799] hub 5-0:1.0: USB hub found > [ 1.981808] hub 5-0:1.0: 5 ports detected > [ 1.981809] hub 5-0:1.0: standalone hub > [ 1.981810] hub 5-0:1.0: no power switching (usb 1.0) > [ 1.981812] hub 5-0:1.0: no over-current protection > [ 1.981813] hub 5-0:1.0: power on to power good time: 4ms > [ 1.981823] hub 5-0:1.0: local power source is good > [ 1.981825] hub 5-0:1.0: trying to enable port power on non-switchable hub > [ 1.981866] drivers/usb/core/inode.c: creating file '001' > [ 1.981933] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0 > [ 1.982295] xen: registering gsi 18 triggering 0 polarity 1 > [ 1.982299] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 1.982301] xen: --> pirq=18 -> irq=18 (gsi=18) > [ 1.982302] Already setup the GSI :18 > [ 1.982329] ohci_hcd 0000:00:14.5: OHCI Host Controller > [ 1.982338] drivers/usb/core/inode.c: creating file '006' > [ 1.982767] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus > number 6 > [ 1.982779] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk > [ 1.982852] ohci_hcd 0000:00:14.5: created debug files > [ 1.982854] ohci_hcd 0000:00:14.5: supports USB remote wakeup > [ 1.982861] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf98fd000 > [ 2.025152] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000 > [ 2.038185] ohci_hcd 0000:00:14.5: OHCI controller state > [ 2.038189] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, > rh state running > [ 2.038193] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational > CBSR=3 > [ 2.038196] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 > [ 2.038200] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF > [ 2.038203] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH > [ 2.038223] ohci_hcd 0000:00:14.5: hcca frame #0005 > [ 2.038227] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS > NDP=2(2) > [ 2.038230] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 > [ 2.038233] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE > [ 2.038237] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS > [ 2.038240] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS > [ 2.038264] usb usb6: default language 0x0409 > [ 2.038280] usb usb6: udev 1, busnum 6, minor = 640 > [ 2.038282] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.038283] usb usb6: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.038285] usb usb6: Product: OHCI Host Controller > [ 2.038286] usb usb6: Manufacturer: Linux 3.2.0-rc0+ ohci_hcd > [ 2.038288] usb usb6: SerialNumber: 0000:00:14.5 > [ 2.038616] usb usb6: usb_probe_device > [ 2.038618] usb usb6: configuration #1 chosen from 1 choice > [ 2.038627] usb usb6: adding 6-0:1.0 (config #1, interface 0) > [ 2.038781] hub 6-0:1.0: usb_probe_interface > [ 2.038783] hub 6-0:1.0: usb_probe_interface - got id > [ 2.038784] hub 6-0:1.0: USB hub found > [ 2.038793] hub 6-0:1.0: 2 ports detected > [ 2.038795] hub 6-0:1.0: standalone hub > [ 2.038796] hub 6-0:1.0: no power switching (usb 1.0) > [ 2.038797] hub 6-0:1.0: no over-current protection > [ 2.038799] hub 6-0:1.0: power on to power good time: 4ms > [ 2.038809] hub 6-0:1.0: local power source is good > [ 2.038810] hub 6-0:1.0: trying to enable port power on non-switchable hub > [ 2.038888] drivers/usb/core/inode.c: creating file '001' > [ 2.039293] xen: registering gsi 18 triggering 0 polarity 1 > [ 2.039297] xen_map_pirq_gsi: returning irq 18 for gsi 18 > [ 2.039298] xen: --> pirq=18 -> irq=18 (gsi=18) > [ 2.039300] Already setup the GSI :18 > [ 2.039318] ohci_hcd 0000:00:16.0: OHCI Host Controller > [ 2.039327] drivers/usb/core/inode.c: creating file '007' > [ 2.039554] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus > number 7 > [ 2.039566] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk > [ 2.039638] ohci_hcd 0000:00:16.0: created debug files > [ 2.039639] ohci_hcd 0000:00:16.0: supports USB remote wakeup > [ 2.039647] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf98fe000 > [ 2.082144] hub 5-0:1.0: state 7 ports 5 chg 0000 evt 0000 > [ 2.095207] ohci_hcd 0000:00:16.0: OHCI controller state > [ 2.095214] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers, > rh state running > [ 2.095218] ohci_hcd 0000:00:16.0: control 0x283 RWC HCFS=operational > CBSR=3 > [ 2.095221] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0 > [ 2.095224] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF > [ 2.095228] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH > [ 2.095250] ohci_hcd 0000:00:16.0: hcca frame #0005 > [ 2.095253] ohci_hcd 0000:00:16.0: roothub.a 02001204 POTPGT=2 NOCP NPS > NDP=4(4) > [ 2.095256] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000 > [ 2.095260] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE > [ 2.095263] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS > [ 2.095267] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS > [ 2.095270] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS > [ 2.095273] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS > [ 2.095292] usb usb7: default language 0x0409 > [ 2.095305] usb usb7: udev 1, busnum 7, minor = 768 > [ 2.095307] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > [ 2.095308] usb usb7: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.095310] usb usb7: Product: OHCI Host Controller > [ 2.095311] usb usb7: Manufacturer: Linux 3.2.0-rc0+ ohci_hcd > [ 2.095313] usb usb7: SerialNumber: 0000:00:16.0 > [ 2.095642] usb usb7: usb_probe_device > [ 2.095644] usb usb7: configuration #1 chosen from 1 choice > [ 2.095653] usb usb7: adding 7-0:1.0 (config #1, interface 0) > [ 2.095820] hub 7-0:1.0: usb_probe_interface > [ 2.095822] hub 7-0:1.0: usb_probe_interface - got id > [ 2.095823] hub 7-0:1.0: USB hub found > [ 2.095833] hub 7-0:1.0: 4 ports detected > [ 2.095834] hub 7-0:1.0: standalone hub > [ 2.095835] hub 7-0:1.0: no power switching (usb 1.0) > [ 2.095846] hub 7-0:1.0: no over-current protection > [ 2.095848] hub 7-0:1.0: power on to power good time: 4ms > [ 2.095858] hub 7-0:1.0: local power source is good > [ 2.095859] hub 7-0:1.0: trying to enable port power on non-switchable hub > [ 2.095898] drivers/usb/core/inode.c: creating file '001' > [ 2.095993] ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0 > [ 2.096345] uhci_hcd: USB Universal Host Controller Interface driver > [ 2.096654] usbcore: registered new interface driver usblp > [ 2.096655] Initializing USB Mass Storage driver... > [ 2.096788] usbcore: registered new interface driver usb-storage > [ 2.096799] USB Mass Storage support registered. > [ 2.096945] usbcore: registered new interface driver libusual > [ 2.097241] usbcore: registered new interface driver usbserial > [ 2.097245] usbserial: USB Serial Driver core > [ 2.097358] USB Serial support registered for cp210x > [ 2.097471] usbcore: registered new interface driver cp210x > [ 2.097472] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver > [ 2.097590] USB Serial support registered for DeLorme Earthmate USB > [ 2.097687] USB Serial support registered for HID->COM RS232 Adapter > [ 2.097782] USB Serial support registered for Nokia CA-42 V2 Adapter > [ 2.097891] usbcore: registered new interface driver cypress > [ 2.097893] cypress_m8: v1.10:Cypress USB to Serial Driver > [ 2.097992] USB Serial support registered for Moschip 2 port adapter > [ 2.097994] mos7720: 2.1:Moschip USB Serial Driver > [ 2.098141] usbcore: registered new interface driver moschip7720 > [ 2.098244] USB Serial support registered for Moschip 7840/7820 USB Serial > Driver > [ 2.098246] mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver > [ 2.098372] usbcore: registered new interface driver mos7840 > [ 2.098814] i8042: PNP: No PS/2 controller found. Probing ports directly. > [ 2.099543] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 2.099557] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 2.100022] mousedev: PS/2 mouse device common for all mice > [ 2.100677] rtc_cmos 00:04: RTC can wake from S4 > [ 2.101180] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 > [ 2.101280] rtc0: alarms up to one month, y3k, 114 bytes nvram > [ 2.101963] lirc_dev: IR Remote Control driver registered, major 251 > [ 2.101976] IR NEC protocol handler initialized > [ 2.101978] IR RC5(x) protocol handler initialized > [ 2.101980] IR RC6 protocol handler initialized > [ 2.101982] IR JVC protocol handler initialized > [ 2.101983] IR Sony protocol handler initialized > [ 2.101985] IR RC5 (streamzap) protocol handler initialized > [ 2.101987] IR MCE Keyboard/mouse protocol handler initialized > [ 2.101989] IR LIRC bridge handler initialized > [ 2.101990] Linux video capture interface: v2.00 > [ 2.102215] i2c-core: driver [tuner] using legacy suspend method > [ 2.102216] i2c-core: driver [tuner] using legacy resume method > [ 2.102410] i2c-core: driver [msp3400] using legacy suspend method > [ 2.102412] i2c-core: driver [msp3400] using legacy resume method > [ 2.102879] usbcore: registered new interface driver poseidon > [ 2.102991] usbcore: registered new interface driver cx231xx > [ 2.103138] usbcore: registered new interface driver usbvision > [ 2.103140] USBVision USB Video Device Driver for Linux : 0.9.11 > [ 2.103453] usbcore: registered new interface driver pvrusb2 > [ 2.103454] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 > Encoder/Tuner > [ 2.103456] pvrusb2: Debug mask is 31 (0x1f) > [ 2.103586] usbcore: registered new interface driver tm6000 > [ 2.103698] usbcore: registered new interface driver zr364xx > [ 2.103830] usbcore: registered new interface driver stkwebcam > [ 2.103940] usbcore: registered new interface driver sn9c102 > [ 2.104071] usbcore: registered new interface driver et61x251 > [ 2.104189] usbcore: registered new interface driver Philips webcam > [ 2.104191] gspca_main: v2.14.0 registered > [ 2.104307] usbcore: registered new interface driver benq > [ 2.104432] usbcore: registered new interface driver conex > [ 2.104540] usbcore: registered new interface driver cpia1 > [ 2.104649] usbcore: registered new interface driver etoms > [ 2.104757] usbcore: registered new interface driver finepix > [ 2.104874] usbcore: registered new interface driver jeilinj > [ 2.104985] usbcore: registered new interface driver kinect > [ 2.105122] usbcore: registered new interface driver konica > [ 2.105228] usbcore: registered new interface driver mars > [ 2.105355] usbcore: registered new interface driver mr97310a > [ 2.105513] usbcore: registered new interface driver nw80x > [ 2.105647] usbcore: registered new interface driver ov519 > [ 2.105757] usbcore: registered new interface driver ov534 > [ 2.105867] usbcore: registered new interface driver ov534_9 > [ 2.105994] usbcore: registered new interface driver pac207 > [ 2.106125] usbcore: registered new interface driver pac7302 > [ 2.106258] usbcore: registered new interface driver pac7311 > [ 2.106364] usbcore: registered new interface driver se401 > [ 2.106470] usbcore: registered new interface driver sn9c2028 > [ 2.106594] usbcore: registered new interface driver sn9c20x > [ 2.106712] usbcore: registered new interface driver sonixb > [ 2.106831] usbcore: registered new interface driver sonixj > [ 2.106949] usbcore: registered new interface driver spca500 > [ 2.107081] usbcore: registered new interface driver spca501 > [ 2.107211] usbcore: registered new interface driver spca505 > [ 2.107326] usbcore: registered new interface driver spca506 > [ 2.107432] usbcore: registered new interface driver spca508 > [ 2.107559] usbcore: registered new interface driver spca561 > [ 2.107670] usbcore: registered new interface driver spca1528 > [ 2.107778] usbcore: registered new interface driver sq905 > [ 2.107904] usbcore: registered new interface driver sq905c > [ 2.108014] usbcore: registered new interface driver sq930x > [ 2.108196] usbcore: registered new interface driver sunplus > [ 2.108309] usbcore: registered new interface driver stk014 > [ 2.108427] usbcore: registered new interface driver stv0680 > [ 2.108535] usbcore: registered new interface driver t613 > [ 2.108645] usbcore: registered new interface driver tv8532 > [ 2.108772] usbcore: registered new interface driver vc032x > [ 2.108879] usbcore: registered new interface driver vicam > [ 2.108992] usbcore: registered new interface driver xirlink-cit > [ 2.109145] usbcore: registered new interface driver zc3xx > [ 2.109267] usbcore: registered new interface driver ALi m5602 > [ 2.109388] usbcore: registered new interface driver STV06xx > [ 2.109501] usbcore: registered new interface driver gspca_gl860 > [ 2.109663] usbcore: registered new interface driver hdpvr > [ 2.109776] usbcore: registered new interface driver s2255 > [ 2.109902] usbcore: registered new interface driver uvcvideo > [ 2.109903] USB Video Class driver (1.1.1) > [ 2.110112] f71882fg: Found f71889ed chip at 0x600, revision 16 > [ 2.110464] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode > [ 2.110512] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode > [ 2.110554] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode > [ 2.111792] f71808e_wdt: Unrecognized Fintek device: 0909 > [ 2.111798] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 > [ 2.112097] SP5100 TCO timer: mmio address 0xb8fe00 already in use > [ 2.112107] wdt: Xen WatchDog Timer Driver v0.01 > [ 2.112487] wdt: initialized (timeout=60s, nowayout=0) > [ 2.113129] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: > dm-devel@xxxxxxxxxx > [ 2.113486] EFI Variables Facility v0.08 2004-May-17 > [ 2.116096] usbcore: registered new interface driver usbhid > [ 2.116098] usbhid: USB HID core driver > [ 2.120940] usbcore: registered new interface driver snd-usb-audio > [ 2.121092] usbcore: registered new interface driver snd-ua101 > [ 2.121208] usbcore: registered new interface driver snd-usb-usx2y > [ 2.121338] usbcore: registered new interface driver snd-usb-us122l > [ 2.121454] usbcore: registered new interface driver snd-usb-caiaq > [ 2.121569] usbcore: registered new interface driver snd-usb-6fire > [ 2.121571] ALSA device list: > [ 2.121572] No soundcards found. > [ 2.121636] Netfilter messages via NETLINK v0.30. > [ 2.121697] nf_conntrack version 0.5.0 (7319 buckets, 29276 max) > [ 2.122470] ctnetlink v0.93: registering with nfnetlink. > [ 2.123185] xt_time: kernel timezone is -0000 > [ 2.123201] ip_set: protocol 6 > [ 2.123253] IPVS: Registered protocols () > [ 2.123278] IPVS: Connection hash table configured (size=4096, > memory=64Kbytes) > [ 2.123583] IPVS: Creating netns size=1912 id=0 > [ 2.123590] IPVS: ipvs loaded. > [ 2.125542] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 2.125668] TCP cubic registered > [ 2.125671] NET: Registered protocol family 17 > [ 2.125792] Bridge firewalling registered > [ 2.125806] Ebtables v2.0 registered > [ 2.125850] Registering the dns_resolver key type > [ 2.126537] registered taskstats version 1 > [ 2.128471] Magic number: 12:515:430 > [ 2.139144] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 > [ 2.195158] hub 7-0:1.0: state 7 ports 4 chg 0000 evt 0000 > [ 3.556135] console [netcon0] enabled > [ 3.560114] netconsole: network logging started > [ 3.565183] Freeing unused kernel memory: 644k freed > [ 3.566054] Write protecting the kernel read-only data: 14336k > [ 3.582581] Freeing unused kernel memory: 1108k freed > [ 3.587819] Freeing unused kernel memory: 172k freed > [ 4.375679] EXT4-fs (dm-0): mounted filesystem with ordered data mode. > Opts: (null) > [ 5.735717] udev[1928]: starting version 164 > [ 6.619502] ata1.00: configured for UDMA/133 > [ 6.620486] ata1: EH complete > [ 6.989411] ata1.00: configured for UDMA/133 > [ 6.989416] ata1: EH complete > [ 7.544355] EXT4-fs (dm-0): re-mounted. Opts: (null) > [ 7.750228] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro > [ 13.646383] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. > Priority:-1 extents:1 across:2097148k > [ 14.689994] EXT4-fs (sda1): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 15.923651] r8169 0000:08:00.0: eth1: link down > [ 15.924659] r8169 0000:08:00.0: eth1: link down > [ 16.114905] r8169 0000:09:00.0: eth0: link down > [ 16.115942] r8169 0000:09:00.0: eth0: link down > [ 17.642504] r8169 0000:08:00.0: eth1: link up > [ 18.022436] r8169 0000:09:00.0: eth0: link up > [ 24.083304] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=18250 > DPT=53 LEN=47 > [ 24.083326] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=18250 > DPT=53 LEN=47 > [ 24.116546] FW: ipmasq, Forward .. EoC: IN=eth1 OUT=eth0 > MAC=40:61:86:f4:67:d8:00:13:e8:b8:03:7f:08:00 SRC=172.16.1.20 DST=64.4.34.191 > LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=15618 DF PROTO=TCP SPT=49194 DPT=1863 > WINDOW=0 RES=0x00 ACK RST URGP=0 > [ 24.119022] FW: ipmasq, Forward .. EoC: IN=eth1 OUT=eth0 > MAC=40:61:86:f4:67:d8:00:13:e8:b8:03:7f:08:00 SRC=172.16.1.20 DST=64.4.44.72 > LEN=45 TOS=0x00 PREC=0x00 TTL=127 ID=15619 DF PROTO=TCP SPT=52059 DPT=1863 > WINDOW=65 RES=0x00 ACK PSH FIN URGP=0 > [ 24.497023] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52176 DF PROTO=UDP > SPT=46112 DPT=53 LEN=47 > [ 24.497126] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=38173 DPT=53 LEN=47 > [ 24.497173] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=42462 DPT=53 LEN=47 > [ 24.497219] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=52498 DPT=53 LEN=47 > [ 24.497263] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=41981 DPT=53 LEN=47 > [ 24.497307] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=44950 DPT=53 LEN=47 > [ 24.497356] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=57749 DPT=53 LEN=47 > [ 24.497402] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=40747 DPT=53 LEN=47 > [ 24.497480] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=56044 DPT=53 LEN=47 > [ 24.497527] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=56530 DPT=53 LEN=47 > [ 24.497571] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=59746 DPT=53 LEN=47 > [ 24.497615] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=58422 DPT=53 LEN=47 > [ 24.497671] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=35192 DPT=53 LEN=47 > [ 24.497713] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=52681 DPT=53 LEN=47 > [ 24.497753] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=34661 DPT=53 LEN=47 > [ 24.497793] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=43406 DPT=53 LEN=47 > [ 24.498003] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=40187 DPT=53 LEN=47 > [ 24.498043] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52177 DF PROTO=UDP > SPT=52592 DPT=53 LEN=47 > [ 24.498123] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=40073 DPT=53 LEN=47 > [ 24.498169] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=48232 DPT=53 LEN=47 > [ 24.498213] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=56401 DPT=53 LEN=47 > [ 24.498264] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=42295 DPT=53 LEN=47 > [ 24.498308] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=37428 DPT=53 LEN=47 > [ 24.498353] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=39793 DPT=53 LEN=47 > [ 24.498399] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=39550 DPT=53 LEN=47 > [ 24.498446] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=51014 DPT=53 LEN=47 > [ 24.498486] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=33114 DPT=53 LEN=47 > [ 24.498525] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=46473 DPT=53 LEN=47 > [ 24.498565] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=54857 DPT=53 LEN=47 > [ 24.498606] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=50547 DPT=53 LEN=47 > [ 24.498645] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=57172 DPT=53 LEN=47 > [ 24.498684] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=35018 DPT=53 LEN=47 > [ 24.498879] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=39233 DPT=53 LEN=47 > [ 24.498920] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=55591 DPT=53 LEN=47 > [ 24.498960] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=49309 DPT=53 LEN=47 > [ 24.498999] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=55292 DPT=53 LEN=47 > [ 24.499039] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52178 DF PROTO=UDP > SPT=52173 DPT=53 LEN=47 > [ 24.499121] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=40901 DPT=53 LEN=47 > [ 24.499166] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=57459 DPT=53 LEN=47 > [ 24.499211] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=44390 DPT=53 LEN=47 > [ 24.499260] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=57122 DPT=53 LEN=47 > [ 24.499305] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=33703 DPT=53 LEN=47 > [ 24.499349] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=50839 DPT=53 LEN=47 > [ 24.499396] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=37339 DPT=53 LEN=47 > [ 24.499441] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=56282 DPT=53 LEN=47 > [ 24.499485] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=36999 DPT=53 LEN=47 > [ 24.499530] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=40745 DPT=53 LEN=47 > [ 24.499579] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=57275 DPT=53 LEN=47 > [ 24.499772] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=60162 DPT=53 LEN=47 > [ 24.499812] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=47685 DPT=53 LEN=47 > [ 24.499851] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=44549 DPT=53 LEN=47 > [ 24.499890] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=60280 DPT=53 LEN=47 > [ 24.499929] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=49966 DPT=53 LEN=47 > [ 24.499969] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=60795 DPT=53 LEN=47 > [ 24.500008] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=40379 DPT=53 LEN=47 > [ 24.500048] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52179 DF PROTO=UDP > SPT=41815 DPT=53 LEN=47 > [ 24.500129] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=47336 DPT=53 LEN=47 > [ 24.500174] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=34385 DPT=53 LEN=47 > [ 24.500218] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=34089 DPT=53 LEN=47 > [ 24.500263] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=53958 DPT=53 LEN=47 > [ 24.500307] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=41698 DPT=53 LEN=47 > [ 24.500351] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=54925 DPT=53 LEN=47 > [ 24.500395] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=43597 DPT=53 LEN=47 > [ 24.500440] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=52180 DF PROTO=UDP > SPT=36447 DPT=53 LEN=47 > [ 27.349843] sshd (5162): /proc/5162/oom_adj is deprecated, please use > /proc/5162/oom_score_adj instead. > [ 28.082409] EXT4-fs (dm-2): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 28.705405] EXT4-fs (dm-36): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 29.249131] EXT4-fs (dm-37): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 29.715206] EXT4-fs (dm-38): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 30.388561] EXT4-fs (dm-39): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 30.468794] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=11418 > DPT=53 LEN=47 > [ 30.490797] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=11418 > DPT=53 LEN=47 > [ 30.756151] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=62559 > DPT=53 LEN=47 > [ 30.779123] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=62559 > DPT=53 LEN=47 > [ 30.808008] EXT4-fs (dm-40): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 30.812794] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=28521 > DPT=53 LEN=47 > [ 30.812811] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=28521 > DPT=53 LEN=47 > [ 30.825619] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=61480 > DPT=53 LEN=40 > [ 30.825636] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=61480 > DPT=53 LEN=40 > [ 30.826343] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=28651 > DPT=53 LEN=47 > [ 30.826359] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=28651 > DPT=53 LEN=47 > [ 30.841085] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=24486 > DPT=53 LEN=47 > [ 30.841101] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=24486 > DPT=53 LEN=47 > [ 30.856521] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=58984 > DPT=53 LEN=47 > [ 30.856538] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=58984 > DPT=53 LEN=47 > [ 30.872092] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=52348 > DPT=53 LEN=47 > [ 30.872118] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=52348 > DPT=53 LEN=47 > [ 30.887716] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=61609 > DPT=53 LEN=47 > [ 30.887733] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=61609 > DPT=53 LEN=47 > [ 30.903377] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=22448 > DPT=53 LEN=47 > [ 30.903394] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=22448 > DPT=53 LEN=47 > [ 30.920142] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=15774 > DPT=53 LEN=47 > [ 30.920158] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=15774 > DPT=53 LEN=47 > [ 30.934450] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=33880 > DPT=53 LEN=47 > [ 30.934466] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=33880 > DPT=53 LEN=47 > [ 30.950468] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=63072 > DPT=53 LEN=47 > [ 30.950485] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=63072 > DPT=53 LEN=47 > [ 30.966308] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=13061 > DPT=53 LEN=47 > [ 30.966325] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=13061 > DPT=53 LEN=47 > [ 30.981966] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=47836 > DPT=53 LEN=47 > [ 30.981983] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=47836 > DPT=53 LEN=47 > [ 30.997341] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=55194 > DPT=53 LEN=47 > [ 30.997357] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=55194 > DPT=53 LEN=47 > [ 31.013438] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=50477 > DPT=53 LEN=47 > [ 31.013455] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=50477 > DPT=53 LEN=47 > [ 31.029811] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=13928 > DPT=53 LEN=47 > [ 31.029828] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=13928 > DPT=53 LEN=47 > [ 31.044600] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=41201 > DPT=53 LEN=47 > [ 31.044616] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=41201 > DPT=53 LEN=47 > [ 31.060007] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=64783 > DPT=53 LEN=47 > [ 31.060025] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=64783 > DPT=53 LEN=47 > [ 31.075536] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=45723 > DPT=53 LEN=47 > [ 31.075552] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=45723 > DPT=53 LEN=47 > [ 31.091041] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=26819 > DPT=53 LEN=47 > [ 31.091101] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=26819 > DPT=53 LEN=47 > [ 31.106879] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=5918 > DPT=53 LEN=47 > [ 31.106896] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=5918 > DPT=53 LEN=47 > [ 31.123862] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=8486 > DPT=53 LEN=47 > [ 31.123880] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=8486 > DPT=53 LEN=47 > [ 31.138293] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=30325 > DPT=53 LEN=47 > [ 31.138312] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=30325 > DPT=53 LEN=47 > [ 31.153511] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=50004 > DPT=53 LEN=47 > [ 31.153527] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=50004 > DPT=53 LEN=47 > [ 31.169000] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=39425 > DPT=53 LEN=47 > [ 31.169017] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=39425 > DPT=53 LEN=47 > [ 31.184877] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=8838 > DPT=53 LEN=47 > [ 31.184934] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=8838 > DPT=53 LEN=47 > [ 31.200343] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=42830 > DPT=53 LEN=47 > [ 31.200359] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=42830 > DPT=53 LEN=47 > [ 31.216019] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=25917 > DPT=53 LEN=47 > [ 31.216046] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=25917 > DPT=53 LEN=47 > [ 31.232094] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=11910 > DPT=53 LEN=47 > [ 31.232112] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=11910 > DPT=53 LEN=47 > [ 31.304406] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=14618 > DPT=53 LEN=55 > [ 31.304423] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=14618 > DPT=53 LEN=55 > [ 31.525843] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=62 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=57066 > DPT=53 LEN=42 > [ 31.525859] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=62 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=57066 > DPT=53 LEN=42 > [ 33.370377] EXT4-fs (sdb1): mounted filesystem with ordered data mode. > Opts: barrier=1,errors=remount-ro > [ 38.708110] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=59086 > DPT=53 LEN=47 > [ 38.740705] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=59086 > DPT=53 LEN=47 > [ 40.699839] FW: ipmasq, Forward .. EoC: IN=eth1 OUT=eth0 > MAC=40:61:86:f4:67:d8:00:13:e8:b8:03:7f:08:00 SRC=172.16.1.20 DST=64.4.44.72 > LEN=40 TOS=0x00 PREC=0x00 TTL=127 ID=15669 DF PROTO=TCP SPT=52059 DPT=1863 > WINDOW=0 RES=0x00 ACK RST URGP=0 > [ 40.843016] XENBUS: Unable to read cpu state > [ 40.859766] XENBUS: Unable to read cpu state > [ 40.859943] XENBUS: Unable to read cpu state > [ 40.860165] XENBUS: Unable to read cpu state > [ 40.860324] XENBUS: Unable to read cpu state > [ 40.860521] XENBUS: Unable to read cpu state > [ 47.255764] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=70 TOS=0x00 PREC=0x00 TTL=64 ID=9399 DF PROTO=UDP > SPT=56370 DPT=53 LEN=50 > [ 47.284392] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=70 TOS=0x00 PREC=0x00 TTL=64 ID=9428 DF PROTO=UDP > SPT=38848 DPT=53 LEN=50 > [ 47.315317] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=70 TOS=0x00 PREC=0x00 TTL=64 ID=9459 DF PROTO=UDP > SPT=57230 DPT=53 LEN=50 > [ 47.346000] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=70 TOS=0x00 PREC=0x00 TTL=64 ID=9489 DF PROTO=UDP > SPT=37919 DPT=53 LEN=50 > [ 60.891334] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=24907 > DPT=53 LEN=47 > [ 60.919853] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=24907 > DPT=53 LEN=47 > [ 60.949642] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=36011 > DPT=53 LEN=40 > [ 60.979376] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=36011 > DPT=53 LEN=40 > [ 61.009190] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=42832 > DPT=53 LEN=47 > [ 61.038983] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=42832 > DPT=53 LEN=47 > [ 61.074371] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=23461 > DPT=53 LEN=47 > [ 61.103755] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=23461 > DPT=53 LEN=47 > [ 61.137041] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=56532 > DPT=53 LEN=47 > [ 61.166563] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=56532 > DPT=53 LEN=47 > [ 61.199749] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17213 > DPT=53 LEN=47 > [ 61.229937] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=17213 > DPT=53 LEN=47 > [ 61.277683] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=8231 > DPT=53 LEN=47 > [ 61.306229] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=8231 > DPT=53 LEN=47 > [ 61.347115] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=12397 > DPT=53 LEN=47 > [ 61.376324] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=67 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=12397 > DPT=53 LEN=47 > [ 61.448728] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=6376 > DPT=53 LEN=55 > [ 61.478229] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=6376 > DPT=53 LEN=55 > [ 61.696753] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.200 LEN=62 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=44963 > DPT=53 LEN=42 > [ 61.726660] FW: ipmasq, Output .. EoC: IN= OUT=eth0 SRC=88.159.72.25 > DST=88.159.1.201 LEN=62 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=44963 > DPT=53 LEN=42 > enabled) > (XEN) Processor #0 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > (XEN) Processor #4 0:10 APIC version 16 > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > (XEN) Processor #5 0:10 APIC version 16 > (XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 > (XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) > (XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs > (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Table is not found! > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) > (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) > (XEN) mapped IOAPIC to ffff82c3ffffc000 (fec20000) > (XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 3200.160 MHz processor. > (XEN) Initing memory sharing. > (XEN) AMD Fam10h machine check reporting enabled > (XEN) AMD-Vi: Found MSI capability block > (XEN) AMD-Vi: ACPI Table: > (XEN) AMD-Vi: Signature IVRS > (XEN) AMD-Vi: Length 0x100 > (XEN) AMD-Vi: Revision 0x1 > (XEN) AMD-Vi: CheckSum 0x66 > (XEN) AMD-Vi: OEM_Id AMD > (XEN) AMD-Vi: OEM_Table_Id RD890S > (XEN) AMD-Vi: OEM_Revision 0x202031 > (XEN) AMD-Vi: Creator_Id AMD > (XEN) AMD-Vi: Creator_Revision 0x0 > (XEN) AMD-Vi: IVRS Block: > (XEN) AMD-Vi: Type 0x10 > (XEN) AMD-Vi: Flags 0x3e > (XEN) AMD-Vi: Length 0xd0 > (XEN) AMD-Vi: Dev_Id 0x2 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x0 -> 0x2 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x10 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xb00 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x18 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0xa00 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0xa00 -> 0xa07 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x28 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x900 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x30 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x800 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x50 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x600 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x0 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x43 > (XEN) AMD-Vi: Dev_Id 0x708 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x708 -> 0x7ff > (XEN) AMD-Vi: Dev_Id Alias: 0x700 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x58 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x500 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x500 -> 0x501 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x68 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x400 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x400 -> 0x407 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x88 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x90 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x90 -> 0x92 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0x98 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x98 -> 0x9a > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa0 > (XEN) AMD-Vi: Flags 0xd7 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa3 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa4 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x0 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x43 > (XEN) AMD-Vi: Dev_Id 0x300 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0x300 -> 0x3ff > (XEN) AMD-Vi: Dev_Id Alias: 0xa4 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa5 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa8 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0xa9 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x2 > (XEN) AMD-Vi: Dev_Id 0x100 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x3 > (XEN) AMD-Vi: Dev_Id 0xb0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Dev_Id Range: 0xb0 -> 0xb2 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x0 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x48 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0xd7 > (XEN) AMD-Vi: IVHD Device Entry: > (XEN) AMD-Vi: Type 0x48 > (XEN) AMD-Vi: Dev_Id 0x0 > (XEN) AMD-Vi: Flags 0x0 > (XEN) AMD-Vi: Add device table entry: device id = 0x0000, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0001, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0002, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0010, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0018, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0028, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0030, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0050, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0058, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0068, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0088, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0090, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0091, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0092, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0098, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0099, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x009a, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a0, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a3, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a4, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a5, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a8, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00a9, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00b0, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00b1, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x00b2, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0100, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0400, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0401, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0402, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0403, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0404, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0405, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0406, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0407, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0500, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0501, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0600, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0700, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0800, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0900, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a00, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a01, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a02, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a03, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a04, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a05, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a06, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0a07, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: Add device table entry: device id = 0x0b00, interupt table = > 0x24df1e000 > (XEN) AMD-Vi: IOMMU 0 Enabled. > (XEN) AMD-Vi: Enabling global vector map > (XEN) I/O virtualisation enabled > (XEN) - Dom0 mode: Relaxed > (XEN) Getting VERSION: 80050010 > (XEN) Getting VERSION: 80050010 > (XEN) Getting ID: 0 > (XEN) Getting LVT0: 700 > (XEN) Getting LVT1: 400 > (XEN) enabled ExtINT on CPU#0 > (XEN) ESR value before enabling vector: 0x00000004 after: 0x00000000 > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) init IO_APIC IRQs > (XEN) IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, > 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, > 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 7-25, > 7-26, 7-27, 7-28, 7-29, 7-30, 7-31 not connected. > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) number of MP IRQ sources: 15. > (XEN) number of IO-APIC #6 registers: 24. > (XEN) number of IO-APIC #7 registers: 32. > (XEN) testing the IO APIC....................... > (XEN) IO APIC #6...... > (XEN) .... register #00: 06000000 > (XEN) ....... : physical APIC id: 06 > (XEN) ....... : Delivery Type: 0 > (XEN) ....... : LTS : 0 > (XEN) .... register #01: 00178021 > (XEN) ....... : max redirection entries: 0017 > (XEN) ....... : PRQ implemented: 1 > (XEN) ....... : IO APIC version: 0021 > (XEN) .... register #02: 06000000 > (XEN) ....... : arbitration: 06 > (XEN) .... register #03: 07000000 > (XEN) ....... : Boot DT : 0 > (XEN) .... IRQ redirection table: > (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > (XEN) 00 000 00 1 0 0 0 0 0 0 00 > (XEN) 01 001 01 0 0 0 0 0 1 1 30 > (XEN) 02 001 01 0 0 0 0 0 1 1 F0 > (XEN) 03 001 01 0 0 0 0 0 1 1 38 > (XEN) 04 001 01 0 0 0 0 0 1 1 F1 > (XEN) 05 001 01 0 0 0 0 0 1 1 40 > (XEN) 06 001 01 0 0 0 0 0 1 1 48 > (XEN) 07 001 01 0 0 0 0 0 1 1 50 > (XEN) 08 001 01 0 0 0 0 0 1 1 58 > (XEN) 09 001 01 1 1 0 1 0 1 1 60 > (XEN) 0a 001 01 0 0 0 0 0 1 1 68 > (XEN) 0b 001 01 0 0 0 0 0 1 1 70 > (XEN) 0c 001 01 0 0 0 0 0 1 1 78 > (XEN) 0d 001 01 0 0 0 0 0 1 1 88 > (XEN) 0e 001 01 0 0 0 0 0 1 1 90 > (XEN) 0f 001 01 0 0 0 0 0 1 1 98 > (XEN) 10 000 00 1 0 0 0 0 0 0 00 > (XEN) 11 000 00 1 0 0 0 0 0 0 00 > (XEN) 12 000 00 1 0 0 0 0 0 0 00 > (XEN) 13 000 00 1 0 0 0 0 0 0 00 > (XEN) 14 000 00 1 0 0 0 0 0 0 00 > (XEN) 15 000 00 1 0 0 0 0 0 0 00 > (XEN) 16 000 00 1 0 0 0 0 0 0 00 > (XEN) 17 000 00 1 0 0 0 0 0 0 00 > (XEN) IO APIC #7...... > (XEN) .... register #00: 07000000 > (XEN) ....... : physical APIC id: 07 > (XEN) ....... : Delivery Type: 0 > (XEN) ....... : LTS : 0 > (XEN) .... register #01: 001F8021 > (XEN) ....... : max redirection entries: 001F > (XEN) ....... : PRQ implemented: 1 > (XEN) ....... : IO APIC version: 0021 > (XEN) .... register #02: 00000000 > (XEN) ....... : arbitration: 00 > (XEN) .... IRQ redirection table: > (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > (XEN) 00 000 00 1 0 0 0 0 0 0 00 > (XEN) 01 000 00 1 0 0 0 0 0 0 00 > (XEN) 02 000 00 1 0 0 0 0 0 0 00 > (XEN) 03 000 00 1 0 0 0 0 0 0 00 > (XEN) 04 000 00 1 0 0 0 0 0 0 00 > (XEN) 05 000 00 1 0 0 0 0 0 0 00 > (XEN) 06 000 00 1 0 0 0 0 0 0 00 > (XEN) 07 000 00 1 0 0 0 0 0 0 00 > (XEN) 08 000 00 1 0 0 0 0 0 0 00 > (XEN) 09 000 00 1 0 0 0 0 0 0 00 > (XEN) 0a 000 00 1 0 0 0 0 0 0 00 > (XEN) 0b 000 00 1 0 0 0 0 0 0 00 > (XEN) 0c 000 00 1 0 0 0 0 0 0 00 > (XEN) 0d 000 00 1 0 0 0 0 0 0 00 > (XEN) 0e 000 00 1 0 0 0 0 0 0 00 > (XEN) 0f 000 00 1 0 0 0 0 0 0 00 > (XEN) 10 000 00 1 0 0 0 0 0 0 00 > (XEN) 11 000 00 1 0 0 0 0 0 0 00 > (XEN) 12 000 00 1 0 0 0 0 0 0 00 > (XEN) 13 000 00 1 0 0 0 0 0 0 00 > (XEN) 14 000 00 1 0 0 0 0 0 0 00 > (XEN) 15 000 00 1 0 0 0 0 0 0 00 > (XEN) 16 000 00 1 0 0 0 0 0 0 00 > (XEN) 17 000 00 1 0 0 0 0 0 0 00 > (XEN) 18 000 00 1 0 0 0 0 0 0 00 > (XEN) 19 000 00 1 0 0 0 0 0 0 00 > (XEN) 1a 000 00 1 0 0 0 0 0 0 00 > (XEN) 1b 000 00 1 0 0 0 0 0 0 00 > (XEN) 1c 000 00 1 0 0 0 0 0 0 00 > (XEN) 1d 000 00 1 0 0 0 0 0 0 00 > (XEN) 1e 000 00 1 0 0 0 0 0 0 00 > (XEN) 1f 000 00 1 0 0 0 0 0 0 00 > (XEN) Using vector-based indexing > (XEN) IRQ to pin mappings: > (XEN) IRQ240 -> 0:2 > (XEN) IRQ48 -> 0:1 > (XEN) IRQ56 -> 0:3 > (XEN) IRQ241 -> 0:4 > (XEN) IRQ64 -> 0:5 > (XEN) IRQ72 -> 0:6 > (XEN) IRQ80 -> 0:7 > (XEN) IRQ88 -> 0:8 > (XEN) IRQ96 -> 0:9 > (XEN) IRQ104 -> 0:10 > (XEN) IRQ112 -> 0:11 > (XEN) IRQ120 -> 0:12 > (XEN) IRQ136 -> 0:13 > (XEN) IRQ144 -> 0:14 > (XEN) IRQ152 -> 0:15 > (XEN) .................................... done. > (XEN) Using local APIC timer interrupts. > (XEN) calibrating APIC timer ... > (XEN) ..... CPU clock speed is 3200.1868 MHz. > (XEN) ..... host bus clock speed is 200.0115 MHz. > (XEN) ..... bus_scale = 0x0000CCD7 > (XEN) [2012-01-12 12:25:10] Platform timer appears to have unexpectedly > wrapped 10 or more times. > (XEN) [2012-01-12 12:25:10] Platform timer is 14.318MHz HPET > (XEN) [2012-01-12 12:25:10] Allocated console ring of 64 KiB. > (XEN) [2012-01-12 12:25:10] HVM: ASIDs enabled. > (XEN) [2012-01-12 12:25:10] SVM: Supported advanced features: > (XEN) [2012-01-12 12:25:10] - Nested Page Tables (NPT) > (XEN) [2012-01-12 12:25:10] - Last Branch Record (LBR) Virtualisation > (XEN) [2012-01-12 12:25:10] - Next-RIP Saved on #VMEXIT > (XEN) [2012-01-12 12:25:10] - Pause-Intercept Filter > (XEN) [2012-01-12 12:25:10] HVM: SVM enabled > (XEN) [2012-01-12 12:25:10] HVM: Hardware Assisted Paging detected. > (XEN) [2012-01-12 12:25:09] masked ExtINT on CPU#1 > (XEN) [2012-01-12 12:25:09] masked ExtINT on CPU#2 > (XEN) [2012-01-12 12:25:09] masked ExtINT on CPU#3 > (XEN) [2012-01-12 12:25:09] masked ExtINT on CPU#4 > (XEN) [2012-01-12 12:25:09] masked ExtINT on CPU#5 > (XEN) [2012-01-12 12:25:10] Brought up 6 CPUs > (XEN) [2012-01-12 12:25:10] HPET's MSI mode hasn't been supported when > Interrupt Remapping is enabled. > (XEN) [2012-01-12 12:25:10] ACPI sleep modes: S3 > (XEN) [2012-01-12 12:25:10] MCA: Use hw thresholding to adjust polling > frequency > (XEN) [2012-01-12 12:25:10] mcheck_poll: Machine check polling timer started. > (XEN) [2012-01-12 12:25:10] Xenoprofile: Failed to setup IBS LVT offset, > IBSCTL = 0xffffffff > (XEN) [2012-01-12 12:25:10] *** LOADING DOMAIN 0 *** > (XEN) [2012-01-12 12:25:11] Xen kernel: 64-bit, lsb, compat32 > (XEN) [2012-01-12 12:25:11] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 > -> 0x2b5a000 > (XEN) [2012-01-12 12:25:11] PHYSICAL MEMORY ARRANGEMENT: > (XEN) [2012-01-12 12:25:11] Dom0 alloc.: > 0000000244000000->0000000248000000 (244079 pages to be allocated) > (XEN) [2012-01-12 12:25:11] Init. ramdisk: 000000024f96f000->000000024ffff400 > (XEN) [2012-01-12 12:25:11] VIRTUAL MEMORY ARRANGEMENT: > (XEN) [2012-01-12 12:25:11] Loaded kernel: ffffffff81000000->ffffffff82b5a000 > (XEN) [2012-01-12 12:25:11] Init. ramdisk: ffffffff82b5a000->ffffffff831ea400 > (XEN) [2012-01-12 12:25:11] Phys-Mach map: ffffffff831eb000->ffffffff833eb000 > (XEN) [2012-01-12 12:25:11] Start info: ffffffff833eb000->ffffffff833eb4b4 > (XEN) [2012-01-12 12:25:11] Page tables: ffffffff833ec000->ffffffff8340b000 > (XEN) [2012-01-12 12:25:11] Boot stack: ffffffff8340b000->ffffffff8340c000 > (XEN) [2012-01-12 12:25:11] TOTAL: ffffffff80000000->ffffffff83800000 > (XEN) [2012-01-12 12:25:11] ENTRY ADDRESS: ffffffff81ee5200 > (XEN) [2012-01-12 12:25:11] Dom0 has maximum 6 VCPUs > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0000, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0002, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0010, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0018, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0028, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0030, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0050, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0058, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0068, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0088, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0090, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0092, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0098, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x009a, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00a0, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00a3, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00a4, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00a5, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00a8, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00b0, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x00b2, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: No iommu for device 00:18.0 > (XEN) [2012-01-12 12:25:11] AMD-Vi: No iommu for device 00:18.1 > (XEN) [2012-01-12 12:25:11] AMD-Vi: No iommu for device 00:18.2 > (XEN) [2012-01-12 12:25:11] AMD-Vi: No iommu for device 00:18.3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: No iommu for device 00:18.4 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0400, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0401, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0402, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0403, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0404, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0405, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0406, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0407, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0500, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0501, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0600, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0700, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0800, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0900, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a00, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a01, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a02, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a03, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a04, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a05, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a06, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0a07, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] AMD-Vi: Setup I/O page table: device id = 0x0b00, > root table = 0x24de2d000, domain = 0, paging mode = 3 > (XEN) [2012-01-12 12:25:11] Scrubbing Free RAM: > .......................................................................done. > (XEN) [2012-01-12 12:25:13] Xen trace buffers: disabled > (XEN) [2012-01-12 12:25:13] Std. Loglevel: All > (XEN) [2012-01-12 12:25:13] Guest Loglevel: Nothing (Rate-limited: Errors and > warnings) > (XEN) [2012-01-12 12:25:13] Xen is relinquishing VGA console. > (XEN) [2012-01-12 12:25:13] *** Serial input -> DOM0 (type 'CTRL-a' three > times to switch input to Xen) > (XEN) [2012-01-12 12:25:13] Freed 220kB init memory. > (XEN) [2012-01-12 12:25:13] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> > IRQ 9 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:13] traps.c:2432:d0 Domain attempted WRMSR > 00000000c0010004 from 0x0000eff2fef31f0c to 0x000000000000abcd. > (XEN) [2012-01-12 12:25:13] PCI add device 00:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:00.2 > (XEN) [2012-01-12 12:25:13] PCI add device 00:02.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:03.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:05.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:06.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:0a.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:0b.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:0d.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:11.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:12.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:12.2 > (XEN) [2012-01-12 12:25:13] PCI add device 00:13.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:13.2 > (XEN) [2012-01-12 12:25:13] PCI add device 00:14.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:14.3 > (XEN) [2012-01-12 12:25:13] PCI add device 00:14.4 > (XEN) [2012-01-12 12:25:13] PCI add device 00:14.5 > (XEN) [2012-01-12 12:25:13] PCI add device 00:15.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:16.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:16.2 > (XEN) [2012-01-12 12:25:13] PCI add device 00:18.0 > (XEN) [2012-01-12 12:25:13] PCI add device 00:18.1 > (XEN) [2012-01-12 12:25:13] PCI add device 00:18.2 > (XEN) [2012-01-12 12:25:13] PCI add device 00:18.3 > (XEN) [2012-01-12 12:25:13] PCI add device 00:18.4 > (XEN) [2012-01-12 12:25:13] PCI add device 0b:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.1 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.2 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.3 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.4 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.5 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.6 > (XEN) [2012-01-12 12:25:13] PCI add device 0a:00.7 > (XEN) [2012-01-12 12:25:13] PCI add device 09:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 08:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 06:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 07:01.0 > (XEN) [2012-01-12 12:25:13] PCI add device 07:01.1 > (XEN) [2012-01-12 12:25:13] PCI add device 07:01.2 > (XEN) [2012-01-12 12:25:13] PCI add device 05:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 05:00.1 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.0 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.1 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.2 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.3 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.4 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.5 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.6 > (XEN) [2012-01-12 12:25:13] PCI add device 04:00.7 > (XEN) [2012-01-12 12:25:13] PCI add device 03:06.0 > (XEN) [2012-01-12 12:25:13] IOAPIC[0]: Set PCI routing entry (6-8 -> 0x58 -> > IRQ 8 Mode:0 Active:0) > (XEN) [2012-01-12 12:25:13] IOAPIC[0]: Set PCI routing entry (6-13 -> 0x88 -> > IRQ 13 Mode:0 Active:0) > (XEN) [2012-01-12 12:25:13] IOAPIC[1]: Set PCI routing entry (7-28 -> 0xa0 -> > IRQ 52 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:13] IOAPIC[1]: Set PCI routing entry (7-29 -> 0xa8 -> > IRQ 53 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:13] IOAPIC[1]: Set PCI routing entry (7-30 -> 0xb0 -> > IRQ 54 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:13] IOAPIC[0]: Set PCI routing entry (6-16 -> 0xb8 -> > IRQ 16 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] physdev.c:155: dom0: wrong map_pirq type 3 > (XEN) [2012-01-12 12:25:14] IOAPIC[0]: Set PCI routing entry (6-22 -> 0x41 -> > IRQ 22 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-19 -> 0x49 -> > IRQ 43 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-18 -> 0x51 -> > IRQ 42 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-17 -> 0x59 -> > IRQ 41 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-16 -> 0x61 -> > IRQ 40 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-9 -> 0x69 -> > IRQ 33 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-8 -> 0x71 -> > IRQ 32 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-22 -> 0x79 -> > IRQ 46 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-21 -> 0x81 -> > IRQ 45 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-20 -> 0x89 -> > IRQ 44 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-7 -> 0x91 -> > IRQ 31 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-6 -> 0x99 -> > IRQ 30 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-5 -> 0xa1 -> > IRQ 29 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-4 -> 0xa9 -> > IRQ 28 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[0]: Set PCI routing entry (6-19 -> 0xb1 -> > IRQ 19 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[1]: Set PCI routing entry (7-27 -> 0xc9 -> > IRQ 51 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:14] IOAPIC[0]: Set PCI routing entry (6-17 -> 0xd9 -> > IRQ 17 Mode:1 Active:1) > (XEN) [2012-01-12 12:25:15] IOAPIC[0]: Set PCI routing entry (6-18 -> 0x22 -> > IRQ 18 Mode:1 Active:1) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.