[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0-rc2-7.pvops.qubes.x86_64 (user@devel14) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #2 SMP Wed Aug 24 15:27:24 CEST 2011 [ 0.000000] Command line: ro root=/dev/mapper/vg_dom0-lv_root rd_LVM_LV=vg_dom0/lv_root rd_LVM_LV=vg_dom0/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet max_loop=255 rdloaddriver=xen-pciback [ 0.000000] Freeing be000-f2bab pfn range: 215979 pages freed [ 0.000000] released 215979 pages of unused memory [ 0.000000] 1-1 mapping on 9f->100 [ 0.000000] 1-1 mapping on bdaa1->bdaa7 [ 0.000000] 1-1 mapping on bdbb8->bdc0f [ 0.000000] 1-1 mapping on bdd08->bdf0f [ 0.000000] 1-1 mapping on bdf18->bdf1f [ 0.000000] 1-1 mapping on bdf55->100000 [ 0.000000] Set 271223 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] Xen: 000000000009e400 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000bdaa1000 (usable) [ 0.000000] Xen: 00000000bdaa1000 - 00000000bdaa7000 (reserved) [ 0.000000] Xen: 00000000bdaa7000 - 00000000bdbb8000 (usable) [ 0.000000] Xen: 00000000bdbb8000 - 00000000bdc0f000 (reserved) [ 0.000000] Xen: 00000000bdc0f000 - 00000000bdd08000 (usable) [ 0.000000] Xen: 00000000bdd08000 - 00000000bdf0f000 (reserved) [ 0.000000] Xen: 00000000bdf0f000 - 00000000bdf18000 (usable) [ 0.000000] Xen: 00000000bdf18000 - 00000000bdf1f000 (reserved) [ 0.000000] Xen: 00000000bdf1f000 - 00000000bdf55000 (usable) [ 0.000000] Xen: 00000000bdf55000 - 00000000bdf9f000 (ACPI NVS) [ 0.000000] Xen: 00000000bdf9f000 - 00000000be000000 (ACPI data) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 0000000100000000 - 0000000174bab000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. X460 /X460 , BIOS 06LY.M038.20091110.JIP 11/10/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x174bab max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xbdf55 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f7370] f7370 [ 0.000000] initial memory mapped : 0 - 0449f000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdf55000 [ 0.000000] 0000000000 - 00bdf55000 page 4k [ 0.000000] kernel direct mapping tables up to bdf55000 @ bd4ad000-bdaa1000 [ 0.000000] xen: setting RW the range bda73000 - bdaa1000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000174bab000 [ 0.000000] 0100000000 - 0174bab000 page 4k [ 0.000000] kernel direct mapping tables up to 174bab000 @ bc900000-bd4ad000 [ 0.000000] xen: setting RW the range bcca8000 - bd4ad000 [ 0.000000] RAMDISK: 01b18000 - 0449f000 [ 0.000000] ACPI: RSDP 00000000000f72d0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bdff711f 00074 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bdfe6000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bdfe7000 07A6B (v02 Intel CANTIGA 06040000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000bdf8efc0 00040 [ 0.000000] ACPI: HPET 00000000bdffed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bdffedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000bdffedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bdffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000bdffee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000) [ 0.000000] ACPI: TCPA 00000000bdfef000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000bdfe5000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bdfe4000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bdfe3000 0020F (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00174bab [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bdaa1 [ 0.000000] 0: 0x000bdaa7 -> 0x000bdbb8 [ 0.000000] 0: 0x000bdc0f -> 0x000bdd08 [ 0.000000] 0: 0x000bdf0f -> 0x000bdf18 [ 0.000000] 0: 0x000bdf1f -> 0x000bdf55 [ 0.000000] 0: 0x00100000 -> 0x00174bab [ 0.000000] On node 0 totalpages: 1255459 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 759074 pages, LIFO batch:31 [ 0.000000] Normal zone: 6537 pages used for memmap [ 0.000000] Normal zone: 471586 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] Allocating PCI resources starting at be000000 (gap: be000000:40c00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bdc8a000 s79744 r8192 d22656 u110592 [ 0.000000] pcpu-alloc: s79744 r8192 d22656 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1234581 [ 0.000000] Kernel command line: ro root=/dev/mapper/vg_dom0-lv_root rd_LVM_LV=vg_dom0/lv_root rd_LVM_LV=vg_dom0/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet max_loop=255 rdloaddriver=xen-pciback [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff8800b3a00000 - ffff8800b7a00000 [ 0.000000] software IO TLB at phys 0xb3a00000 - 0xb7a00000 [ 0.000000] Memory: 2890136k/6106796k available (4338k kernel code, 1084960k absent, 2131700k reserved, 4268k data, 532k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 40894464 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2394.082 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.16 BogoMIPS (lpj=9576328) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys devices [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] Initializing cgroup subsys blkio [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] ACPI: Core revision 20110623 [ 0.016102] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.016411] installing Xen timer for CPU 1 [ 0.016542] Brought up 2 CPUs [ 0.016613] devtmpfs: initialized [ 0.017174] Grant table initialized [ 0.017174] print_constraints: dummy: [ 0.017174] RTC time: 15:02:38, date: 08/27/11 [ 0.017174] NET: Registered protocol family 16 [ 0.017174] ACPI: bus type pci registered [ 0.017174] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.017174] PCI: not using MMCONFIG [ 0.017174] PCI: Using configuration type 1 for base access [ 0.017174] bio: create slab at 0 [ 0.017174] ACPI: Added _OSI(Module Device) [ 0.017174] ACPI: Added _OSI(Processor Device) [ 0.017174] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.017174] ACPI: Added _OSI(Processor Aggregator Device) [ 0.023485] ACPI: EC: Look up EC in DSDT [ 0.028643] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.032078] ACPI: SSDT 00000000bdf1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.033102] ACPI: Dynamic OEM Table Load: [ 0.033107] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.033691] ACPI: SSDT 00000000bdf18020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.034684] ACPI: Dynamic OEM Table Load: [ 0.034688] ACPI: SSDT (null) 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.056612] ACPI: SSDT 00000000bdf19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.057679] ACPI: Dynamic OEM Table Load: [ 0.057684] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.068216] ACPI: SSDT 00000000bdf19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.069237] ACPI: Dynamic OEM Table Load: [ 0.069242] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.080578] ACPI: Interpreter enabled [ 0.080578] ACPI: (supports S0 S3 S5) [ 0.080578] ACPI: Using IOAPIC for interrupt routing [ 0.080578] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.082354] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.184863] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.192528] ACPI: Power Resource [FN00] (off) [ 0.192696] ACPI: Power Resource [FN01] (off) [ 0.193388] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.194268] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.194272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.195006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.196011] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.196011] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.196011] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.196011] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.196011] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.196011] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.196011] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 [ 0.196057] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604 [ 0.196150] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.196157] pci 0000:00:01.0: PME# disabled [ 0.196254] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.196350] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] [ 0.196449] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.196561] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] [ 0.196668] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.196764] pci 0000:00:1a.2: reg 20: [io 0x1840-0x185f] [ 0.196880] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.196924] pci 0000:00:1a.7: reg 10: [mem 0xfc204800-0xfc204bff] [ 0.197079] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.197087] pci 0000:00:1a.7: PME# disabled [ 0.197140] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.197175] pci 0000:00:1b.0: reg 10: [mem 0xfc200000-0xfc203fff 64bit] [ 0.197312] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.197319] pci 0000:00:1b.0: PME# disabled [ 0.197365] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.197507] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.197515] pci 0000:00:1c.0: PME# disabled [ 0.197567] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 [ 0.197708] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.197714] pci 0000:00:1c.2: PME# disabled [ 0.197765] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.197904] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.197911] pci 0000:00:1c.3: PME# disabled [ 0.197971] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.198069] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f] [ 0.198164] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.198264] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f] [ 0.198363] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.198478] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf] [ 0.198609] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.198652] pci 0000:00:1d.7: reg 10: [mem 0xfc204c00-0xfc204fff] [ 0.198806] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.198815] pci 0000:00:1d.7: PME# disabled [ 0.198857] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.198994] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601 [ 0.199226] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 [ 0.199273] pci 0000:00:1f.2: reg 10: [io 0x18f0-0x18f7] [ 0.199292] pci 0000:00:1f.2: reg 14: [io 0x18e4-0x18e7] [ 0.199311] pci 0000:00:1f.2: reg 18: [io 0x18e8-0x18ef] [ 0.199330] pci 0000:00:1f.2: reg 1c: [io 0x18e0-0x18e3] [ 0.199349] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18df] [ 0.199368] pci 0000:00:1f.2: reg 24: [mem 0xfc204000-0xfc2047ff] [ 0.199455] pci 0000:00:1f.2: PME# supported from D3hot [ 0.199462] pci 0000:00:1f.2: PME# disabled [ 0.199501] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.199537] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit] [ 0.199590] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.199773] pci 0000:01:00.0: [10de:06e8] type 0 class 0x000300 [ 0.199811] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff] [ 0.199853] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.199895] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit] [ 0.199924] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.199952] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.204045] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.204052] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.204058] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.204067] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.204211] pci 0000:02:00.0: [8086:4232] type 0 class 0x000280 [ 0.204263] pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf6001fff 64bit] [ 0.204468] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.204478] pci 0000:02:00.0: PME# disabled [ 0.212046] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.212054] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.212061] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.212073] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.212173] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.212181] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.212188] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.212200] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.212495] pci 0000:06:00.0: [11ab:4363] type 0 class 0x000200 [ 0.212677] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit] [ 0.212777] pci 0000:06:00.0: reg 18: [io 0x5000-0x50ff] [ 0.213140] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.213473] pci 0000:06:00.0: supports D1 D2 [ 0.213475] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213504] pci 0000:06:00.0: PME# disabled [ 0.213742] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.213750] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.213757] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff] [ 0.213769] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.213905] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 0.213926] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.213929] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.213933] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.213936] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.213939] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.213943] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.213993] pci_bus 0000:00: on NUMA node 0 [ 0.213998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.214232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.214391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.214480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.214555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.214644] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.214648] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.214650] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.226909] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.227006] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.227100] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) [ 0.227194] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.227287] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. [ 0.227382] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.227475] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.227568] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.227615] xen/balloon: Initialising balloon driver. [ 0.227620] last_pfn = 0x174bab max_arch_pfn = 0x400000000 [ 0.238707] xen-balloon: Initialising balloon driver. [ 0.238739] xen/balloon: Xen selfballooning driver disabled for domain0. [ 0.238819] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.238819] vgaarb: loaded [ 0.238819] vgaarb: bridge control possible 0000:01:00.0 [ 0.238819] PCI: Using ACPI for IRQ routing [ 0.244014] PCI: pci_cache_line_size set to 64 bytes [ 0.244014] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.244014] reserve RAM buffer: 00000000bdaa1000 - 00000000bfffffff [ 0.244014] reserve RAM buffer: 00000000bdbb8000 - 00000000bfffffff [ 0.244014] reserve RAM buffer: 00000000bdd08000 - 00000000bfffffff [ 0.244014] reserve RAM buffer: 00000000bdf18000 - 00000000bfffffff [ 0.244014] reserve RAM buffer: 00000000bdf55000 - 00000000bfffffff [ 0.244014] reserve RAM buffer: 0000000174bab000 - 0000000177ffffff [ 0.244134] Switching to clocksource xen [ 0.246624] pnp: PnP ACPI init [ 0.246640] ACPI: bus type pnp registered [ 0.247435] pnp 00:00: [bus 00-ff] [ 0.247439] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.247442] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.247444] pnp 00:00: [io 0x0d00-0xffff window] [ 0.247447] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.247450] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.247453] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.247456] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.247458] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.247461] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.247464] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.247467] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.247471] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.247474] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.247477] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.247480] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.247483] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.247485] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.247488] pnp 00:00: [mem 0xc0000000-0xfebfffff window] [ 0.247491] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.247599] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.247886] pnp 00:01: [io 0x0000-0x001f] [ 0.247892] pnp 00:01: [io 0x0081-0x0091] [ 0.247894] pnp 00:01: [io 0x0093-0x009f] [ 0.247897] pnp 00:01: [io 0x00c0-0x00df] [ 0.247900] pnp 00:01: [dma 4] [ 0.247931] Switched to NOHz mode on CPU #0 [ 0.247959] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.247977] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.248015] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.248168] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.248236] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.248241] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.248261] pnp 00:04: [io 0x00f0] [ 0.248265] xen: registering gsi 13 triggering 1 polarity 0 [ 0.248271] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.248273] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.248282] pnp 00:04: [irq 13] [ 0.248320] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.248339] pnp 00:05: [io 0x002e-0x002f] [ 0.248342] pnp 00:05: [io 0x004e-0x004f] [ 0.248344] pnp 00:05: [io 0x0061] [ 0.248347] pnp 00:05: [io 0x0063] [ 0.248349] pnp 00:05: [io 0x0065] [ 0.248352] pnp 00:05: [io 0x0067] [ 0.248354] pnp 00:05: [io 0x0070] [ 0.248356] pnp 00:05: [io 0x0080] [ 0.248359] pnp 00:05: [io 0x0092] [ 0.248361] pnp 00:05: [io 0x00b2-0x00b3] [ 0.248364] pnp 00:05: [io 0x0680-0x069f] [ 0.248366] pnp 00:05: [io 0x0480-0x048f] [ 0.248369] pnp 00:05: [io 0xffff] [ 0.248371] pnp 00:05: [io 0xffff] [ 0.248374] pnp 00:05: [io 0x0400-0x047f] [ 0.248376] pnp 00:05: [io 0x0480-0x048f] [ 0.248379] pnp 00:05: [io 0x1180-0x11ff] [ 0.248381] pnp 00:05: [io 0x164e-0x164f] [ 0.248384] pnp 00:05: [io 0x5000-0x500f] [ 0.248386] pnp 00:05: [io 0xfe00] [ 0.248405] pnp 00:05: disabling [io 0x5000-0x500f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x5000-0x5fff] [ 0.248426] pnp 00:05: disabling [io 0x5000-0x500f disabled] because it overlaps 0000:06:00.0 BAR 2 [io 0x5000-0x50ff] [ 0.248470] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.248474] system 00:05: [io 0x0480-0x048f] has been reserved [ 0.248477] system 00:05: [io 0xffff] has been reserved [ 0.248481] system 00:05: [io 0xffff] has been reserved [ 0.248484] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.248487] system 00:05: [io 0x0480-0x048f] has been reserved [ 0.248491] system 00:05: [io 0x1180-0x11ff] has been reserved [ 0.248494] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.248497] system 00:05: [io 0xfe00] has been reserved [ 0.248501] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.248544] pnp 00:06: [io 0x06a0-0x06af] [ 0.248547] pnp 00:06: [io 0x06b0-0x06ff] [ 0.248607] system 00:06: [io 0x06a0-0x06af] has been reserved [ 0.248610] system 00:06: [io 0x06b0-0x06ff] has been reserved [ 0.248614] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.248630] pnp 00:07: [io 0x0070-0x0077] [ 0.248633] xen: registering gsi 8 triggering 1 polarity 0 [ 0.248636] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.248638] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.248647] pnp 00:07: [irq 8] [ 0.248688] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248787] pnp 00:08: [io 0x0060] [ 0.248790] pnp 00:08: [io 0x0064] [ 0.248792] xen: registering gsi 1 triggering 1 polarity 0 [ 0.248795] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 0.248797] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.248803] pnp 00:08: [irq 1] [ 0.248847] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.248862] xen: registering gsi 12 triggering 1 polarity 0 [ 0.248865] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 0.248868] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.248873] pnp 00:09: [irq 12] [ 0.248918] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.249136] Switched to NOHz mode on CPU #1 [ 0.249276] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.249279] pnp 00:0a: [mem 0xfed10000-0xfed13fff] [ 0.249282] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.249284] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.249287] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.249290] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.249292] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.249295] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] [ 0.249385] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.249389] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.249392] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.249396] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.249399] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.249403] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.249406] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.249409] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.249413] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.249523] pnp 00:0b: [mem 0xfed40000-0xfed44fff] [ 0.249593] pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.250057] pnp: PnP ACPI: found 12 devices [ 0.250059] ACPI: ACPI bus type pnp unregistered [ 0.257766] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.257786] PCI: max bus depth: 1 pci_try_num: 2 [ 0.257866] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0000000-0xc00000ff 64bit] [ 0.257879] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0000000-0xc00000ff 64bit] (PCI address [0xc0000000-0xc00000ff]) [ 0.257885] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.257888] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.257892] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.257900] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.257906] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.257916] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.257921] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.257930] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.257938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.257950] pci 0000:00:1c.2: PCI bridge to [bus 04-05] [ 0.257955] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.257964] pci 0000:00:1c.2: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.257972] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.257984] pci 0000:06:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref] [ 0.257988] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.257992] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff] [ 0.258002] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfbffffff] [ 0.258009] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.258021] pci 0000:00:1e.0: PCI bridge to [bus 08-08] [ 0.258052] xen: registering gsi 16 triggering 0 polarity 1 [ 0.258063] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.258069] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.258076] pci 0000:00:01.0: setting latency timer to 64 [ 0.258087] xen: registering gsi 17 triggering 0 polarity 1 [ 0.258095] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.258099] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.258107] pci 0000:00:1c.0: setting latency timer to 64 [ 0.258118] xen: registering gsi 18 triggering 0 polarity 1 [ 0.258124] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.258128] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.258135] pci 0000:00:1c.2: setting latency timer to 64 [ 0.258146] xen: registering gsi 19 triggering 0 polarity 1 [ 0.258152] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.258156] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.258164] pci 0000:00:1c.3: setting latency timer to 64 [ 0.258177] pci 0000:00:1e.0: setting latency timer to 64 [ 0.258183] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.258186] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.258189] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.258192] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.258195] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.258197] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.258200] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.258203] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff] [ 0.258206] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.258209] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.258212] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.258215] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.258218] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.258221] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.258224] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.258227] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 0.258229] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.258232] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.258236] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 0.258238] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 0.258241] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 0.258244] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.258247] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.258249] pci_bus 0000:08: resource 9 [mem 0xc0000000-0xfebfffff] [ 0.258317] NET: Registered protocol family 2 [ 0.258398] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.259190] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.260921] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.261346] TCP: Hash tables configured (established 262144 bind 65536) [ 0.261349] TCP reno registered [ 0.261354] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.261416] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.261621] NET: Registered protocol family 1 [ 0.261965] pci 0000:01:00.0: Boot video device [ 0.262006] PCI: CLS 64 bytes, default 64 [ 0.262065] Unpacking initramfs... [ 0.331732] Freeing initrd memory: 42524k freed [ 0.350855] Simple Boot Flag at 0x37 set to 0x1 [ 0.351379] audit: initializing netlink socket (disabled) [ 0.351398] type=2000 audit(1314457359.335:1): initialized [ 0.375451] VFS: Disk quotas dquot_6.5.2 [ 0.375489] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.375656] msgmni has been set to 5727 [ 0.375816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.375820] io scheduler noop registered [ 0.375822] io scheduler deadline registered [ 0.375841] io scheduler cfq registered (default) [ 0.375988] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.376179] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.376402] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.376621] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.377344] Non-volatile memory driver v1.3 [ 0.377361] ramoops: platform device not found, using module parameters [ 0.377385] ramoops: The memory size and the record size must be non-zero [ 0.377467] ramoops: probe of ramoops failed with error -22 [ 0.403779] loop: module loaded [ 0.403828] Fixed MDIO Bus: probed [ 0.403889] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.404055] i8042: Detected active multiplexing controller, rev 1.1 [ 0.408194] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.408202] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.408206] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.408209] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.408212] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.408360] mousedev: PS/2 mouse device common for all mice [ 0.408730] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.408773] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.408839] device-mapper: uevent: version 1.0.3 [ 0.408911] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx [ 0.409091] TCP cubic registered [ 0.409148] NET: Registered protocol family 10 [ 0.409612] Registering the dns_resolver key type [ 0.409744] registered taskstats version 1 [ 0.410461] Magic number: 7:593:33 [ 0.410658] rtc_cmos 00:07: setting system clock to 2011-08-27 15:02:39 UTC (1314457359) [ 0.410990] Freeing unused kernel memory: 532k freed [ 0.411171] Write protecting the kernel read-only data: 8192k [ 0.415707] Freeing unused kernel memory: 1788k freed [ 0.416358] Freeing unused kernel memory: 124k freed [ 0.442403] pciback 0000:02:00.0: seizing device [ 0.442412] pciback 0000:06:00.0: seizing device [ 0.442637] xen: registering gsi 19 triggering 0 polarity 1 [ 0.442643] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 0.442646] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.442649] Already setup the GSI :19 [ 0.442652] pciback 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.442701] pciback 0000:06:00.0: PCI INT A disabled [ 0.442790] xen: registering gsi 16 triggering 0 polarity 1 [ 0.442793] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 0.442795] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.442798] Already setup the GSI :16 [ 0.442801] pciback 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.442811] pciback 0000:02:00.0: PCI INT A disabled [ 0.442873] xen-pciback: backend is vpci [ 0.443512] dracut: dracut-005-3.fc13 [ 0.455430] dracut: rd_NO_LUKS: removing cryptoluks activation [ 0.467495] udev: starting version 151 [ 0.467589] udevd (63): /proc/63/oom_adj is deprecated, please use /proc/63/oom_score_adj instead. [ 0.513980] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.514081] ACPI: Lid Switch [LID0] [ 0.514132] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.514174] ACPI: Power Button [PWRB] [ 0.514220] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.514270] ACPI: Sleep Button [SLPB] [ 0.514322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.514362] ACPI: Power Button [PWRF] [ 0.625802] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.626531] acpi device:03: registered as cooling_device0 [ 0.626641] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4 [ 0.626702] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no) [ 0.627109] wmi: Mapper loaded [ 0.628675] Linux agpgart interface v0.103 [ 0.633238] [drm] Initialized drm 1.1.0 20060810 [ 0.643106] xen: registering gsi 16 triggering 0 polarity 1 [ 0.643115] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 0.643118] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.643121] Already setup the GSI :16 [ 0.643125] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.643143] nouveau 0000:01:00.0: setting latency timer to 64 [ 0.647777] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298400a2) [ 0.662011] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 0.762374] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 0.762378] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 0.762381] [drm] nouveau 0000:01:00.0: Bios version 62.98.43.00 [ 0.762385] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 0.762388] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 0.762392] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010113f3 00010035 [ 0.762395] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000028 [ 0.762398] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04022342 00020010 [ 0.762401] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [ 0.762405] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 0.762408] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 0.762411] [drm] nouveau 0000:01:00.0: 1: 0x00000140: type 0x40 idx 1 tag 0xff [ 0.762414] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [ 0.762417] [drm] nouveau 0000:01:00.0: 3: 0x00002346: type 0x46 idx 3 tag 0x08 [ 0.762429] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD84A [ 0.787652] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDBFC [ 0.794483] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE3C2 [ 0.794500] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE4B4 [ 0.795600] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE6C4 [ 0.795602] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE729 [ 0.815462] [drm] nouveau 0000:01:00.0: 0xE729: Condition still not met after 20ms, skipping following opcodes [ 0.815488] [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (74900kHz pixel clock) [ 0.837320] [drm] nouveau 0000:01:00.0: 4 available performance level(s) [ 0.837326] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 900mV fanspeed 100% timing 5 [ 0.837331] [drm] nouveau 0000:01:00.0: 1: memory 301MHz core 275MHz shader 550MHz voltage 900mV fanspeed 100% timing 7 [ 0.837336] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1090mV fanspeed 100% timing 8 [ 0.837340] [drm] nouveau 0000:01:00.0: 3: memory 702MHz core 529MHz shader 1300MHz voltage 1090mV fanspeed 100% timing 9 [ 0.837368] [drm] nouveau 0000:01:00.0: Register 0x00004030 not found in PLL limits table [ 0.837454] [drm] nouveau 0000:01:00.0: c: memory 300MHz core 275MHz shader 550MHz voltage 900mV [ 0.842518] [TTM] Zone kernel: Available graphics memory: 1467552 kiB. [ 0.842520] [TTM] Initializing pool allocator. [ 0.842531] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [ 0.842569] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 0.856104] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 0.857436] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.857439] [drm] No driver support for vblank timestamp query. [ 0.932877] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x310000, bo ffff880004364400 [ 0.932959] fbcon: nouveaufb (fb0) is primary device [ 1.513963] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 1.549179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 1.577081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 2.272291] Console: switching to colour frame buffer device 160x50 [ 2.274627] fb0: nouveaufb frame buffer device [ 2.274629] drm: registered panic notifier [ 2.274636] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 2.303592] dracut: Starting plymouth daemon [ 2.458994] dracut: rd_NO_DM: removing DM RAID activation [ 2.464497] dracut: rd_NO_MD: removing MD RAID activation [ 2.528890] usbcore: registered new interface driver usbfs [ 2.528918] usbcore: registered new interface driver hub [ 2.562497] usbcore: registered new device driver usb [ 2.563118] uhci_hcd: USB Universal Host Controller Interface driver [ 2.563176] xen: registering gsi 16 triggering 0 polarity 1 [ 2.563183] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 2.563186] xen: --> pirq=16 -> irq=16 (gsi=16) [ 2.563189] Already setup the GSI :16 [ 2.563193] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.563206] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.563212] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.563242] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.563290] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 2.563366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.563370] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.563373] usb usb1: Product: UHCI Host Controller [ 2.563375] usb usb1: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 uhci_hcd [ 2.563378] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.563951] hub 1-0:1.0: USB hub found [ 2.563958] hub 1-0:1.0: 2 ports detected [ 2.564073] xen: registering gsi 21 triggering 0 polarity 1 [ 2.564088] xen: --> pirq=21 -> irq=21 (gsi=21) [ 2.564095] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.564105] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.564111] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.564120] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 2.564185] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 2.564250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.564253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.564256] usb usb2: Product: UHCI Host Controller [ 2.564259] usb usb2: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 uhci_hcd [ 2.564262] usb usb2: SerialNumber: 0000:00:1a.1 [ 2.569992] hub 2-0:1.0: USB hub found [ 2.570001] hub 2-0:1.0: 2 ports detected [ 2.570109] xen: registering gsi 19 triggering 0 polarity 1 [ 2.570116] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 2.570118] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.570121] Already setup the GSI :19 [ 2.570125] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 2.570137] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.570143] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.570153] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 2.570225] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 [ 2.570310] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.570314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.570316] usb usb3: Product: UHCI Host Controller [ 2.570319] usb usb3: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 uhci_hcd [ 2.570322] usb usb3: SerialNumber: 0000:00:1a.2 [ 2.571336] hub 3-0:1.0: USB hub found [ 2.571342] hub 3-0:1.0: 2 ports detected [ 2.571439] xen: registering gsi 23 triggering 0 polarity 1 [ 2.571455] xen: --> pirq=23 -> irq=23 (gsi=23) [ 2.571462] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.571473] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.571479] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.571491] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 2.571552] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 2.571623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.571626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.571629] usb usb4: Product: UHCI Host Controller [ 2.571632] usb usb4: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 uhci_hcd [ 2.571635] usb usb4: SerialNumber: 0000:00:1d.0 [ 2.572183] hub 4-0:1.0: USB hub found [ 2.572189] hub 4-0:1.0: 2 ports detected [ 2.572277] xen: registering gsi 19 triggering 0 polarity 1 [ 2.572281] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 2.572284] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.572287] Already setup the GSI :19 [ 2.572290] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.572302] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.572307] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.572315] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 2.572355] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 2.572423] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.572427] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.572429] usb usb5: Product: UHCI Host Controller [ 2.572432] usb usb5: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 uhci_hcd [ 2.572435] usb usb5: SerialNumber: 0000:00:1d.1 [ 2.576597] hub 5-0:1.0: USB hub found [ 2.576607] hub 5-0:1.0: 2 ports detected [ 2.576718] xen: registering gsi 18 triggering 0 polarity 1 [ 2.576724] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 2.576727] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.576730] Already setup the GSI :18 [ 2.576733] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.576745] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.576751] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.576761] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 2.576831] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 2.576906] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.576909] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.576912] usb usb6: Product: UHCI Host Controller [ 2.576915] usb usb6: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 uhci_hcd [ 2.576917] usb usb6: SerialNumber: 0000:00:1d.2 [ 2.586674] hub 6-0:1.0: USB hub found [ 2.586681] hub 6-0:1.0: 2 ports detected [ 2.602985] SCSI subsystem initialized [ 2.620142] libata version 3.00 loaded. [ 2.620935] ahci 0000:00:1f.2: version 3.0 [ 2.620955] xen: registering gsi 19 triggering 0 polarity 1 [ 2.620962] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 2.620964] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.620967] Already setup the GSI :19 [ 2.620971] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.621126] ahci: SSS flag set, parallel bus scan disabled [ 2.621168] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 2.621172] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 2.621181] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.647236] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.647240] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.675115] scsi0 : ahci [ 2.721339] scsi1 : ahci [ 2.734093] scsi2 : ahci [ 2.737871] scsi3 : ahci [ 2.790214] scsi4 : ahci [ 2.838913] scsi5 : ahci [ 2.839018] ata1: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204100 irq 288 [ 2.839023] ata2: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204180 irq 288 [ 2.839026] ata3: DUMMY [ 2.839028] ata4: DUMMY [ 2.839032] ata5: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204300 irq 288 [ 2.839036] ata6: SATA max UDMA/133 abar m2048@0xfc204000 port 0xfc204380 irq 288 [ 2.839114] xen: registering gsi 19 triggering 0 polarity 1 [ 2.839121] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 2.839123] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.839126] Already setup the GSI :19 [ 2.839130] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 2.839181] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.839188] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.839202] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 2.839267] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.843164] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 2.843179] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc204800 [ 2.856137] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.856207] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.856210] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.856214] usb usb7: Product: EHCI Host Controller [ 2.856216] usb usb7: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 ehci_hcd [ 2.856219] usb usb7: SerialNumber: 0000:00:1a.7 [ 2.856362] hub 7-0:1.0: USB hub found [ 2.856368] hub 7-0:1.0: 6 ports detected [ 2.856483] xen: registering gsi 23 triggering 0 polarity 1 [ 2.856491] xen_map_pirq_gsi: returning irq 23 for gsi 23 [ 2.856493] xen: --> pirq=23 -> irq=23 (gsi=23) [ 2.856496] Already setup the GSI :23 [ 2.856500] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.856541] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.856548] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.856561] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 2.856625] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.860529] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.860542] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc204c00 [ 2.876236] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.876275] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.876279] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.876282] usb usb8: Product: EHCI Host Controller [ 2.876285] usb usb8: Manufacturer: Linux 3.1.0-rc2-7.pvops.qubes.x86_64 ehci_hcd [ 2.876287] usb usb8: SerialNumber: 0000:00:1d.7 [ 2.876436] hub 8-0:1.0: USB hub found [ 2.876443] hub 8-0:1.0: 6 ports detected [ 3.192087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.193844] ata1.00: ATA-7: CORSAIR CMFSSD-128GBG2D, VBM19C1Q, max UDMA/100 [ 3.193848] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.194980] ata1.00: configured for UDMA/100 [ 3.195128] scsi 0:0:0:0: Direct-Access ATA CORSAIR CMFSSD-1 VBM1 PQ: 0 ANSI: 5 [ 3.376156] usb 7-3: new high speed USB device number 2 using ehci_hcd [ 3.512077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.512557] ata2.00: ATAPI: TSSTcorp CDDVDW TS-U633A, SC01, max UDMA/100 [ 3.512562] ata2.00: applying bridge limits [ 3.513594] ata2.00: configured for UDMA/100 [ 3.516745] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-U633A SC01 PQ: 0 ANSI: 5 [ 3.836073] ata5: SATA link down (SStatus 0 SControl 300) [ 4.041386] usb 7-3: New USB device found, idVendor=174f, idProduct=5932 [ 4.041390] usb 7-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.156077] ata6: SATA link down (SStatus 0 SControl 300) [ 4.162512] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 4.162691] sd 0:0:0:0: [sda] Write Protect is off [ 4.162695] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.162732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.163771] sda: sda1 sda2 [ 4.164233] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.169235] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.169240] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.169631] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.304252] dracut: Scanning devices sda2 for LVM logical volumes vg_dom0/lv_root vg_dom0/lv_swap [ 4.347404] dracut: inactive '/dev/vg_dom0/lv_root' [112.91 GiB] inherit [ 4.347489] dracut: inactive '/dev/vg_dom0/lv_swap' [5.84 GiB] inherit [ 4.500452] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem [ 4.500457] EXT4-fs (dm-0): write access will be enabled during recovery [ 4.508079] usb 2-2: new full speed USB device number 2 using uhci_hcd [ 4.671262] usb 2-2: New USB device found, idVendor=08ff, idProduct=1600 [ 4.671266] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.671269] usb 2-2: Product: Fingerprint Sensor [ 4.869760] EXT4-fs (dm-0): orphan cleanup on readonly fs [ 4.869769] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4591900 [ 4.869823] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4591908 [ 4.869841] EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 4591899 [ 4.869854] EXT4-fs (dm-0): 3 orphan inodes deleted [ 4.869857] EXT4-fs (dm-0): recovery complete [ 4.911124] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.912073] usb 6-2: new full speed USB device number 2 using uhci_hcd [ 4.915153] dracut: Mounted root filesystem /dev/mapper/vg_dom0-lv_root [ 5.078094] dracut: Switching root [ 5.094937] usb 6-2: New USB device found, idVendor=0a5c, idProduct=2101 [ 5.094942] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.094945] usb 6-2: Product: BCM92045NMD [ 5.094948] usb 6-2: Manufacturer: Broadcom Corp [ 5.094950] usb 6-2: SerialNumber: 00242CCBDB0F [ 5.395023] udev: starting version 151 [ 5.509830] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.510580] ACPI: AC Adapter [ADP1] (off-line) [ 5.511218] iTCO_vendor_support: vendor-support=0 [ 5.512250] ACPI: acpi_idle yielding to (null) [ 5.515166] tpm_tis 00:0b: 1.2 TPM (device-id 0xB, rev-id 16) [ 5.515423] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 5.515570] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 5.520847] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.536306] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.536310] ACPI: Thermal Zone [TZ00] (63 C) [ 5.537443] thermal LNXTHERM:01: registered as thermal_zone1 [ 5.537447] ACPI: Thermal Zone [TZ01] (63 C) [ 5.537871] ACPI: Fan [FAN0] (off) [ 5.537934] ACPI: Fan [FAN1] (off) [ 5.605223] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.605234] ACPI: Battery Slot [BAT1] (battery present) [ 5.621873] xen: registering gsi 22 triggering 0 polarity 1 [ 5.621889] xen: --> pirq=22 -> irq=22 (gsi=22) [ 5.621898] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.622081] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 5.624796] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.624863] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.648926] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 5.661634] Linux video capture interface: v2.00 [ 5.669324] Bluetooth: Core ver 2.16 [ 5.669345] NET: Registered protocol family 31 [ 5.669348] Bluetooth: HCI device and connection manager initialized [ 5.669352] Bluetooth: HCI socket layer initialized [ 5.669355] Bluetooth: L2CAP socket layer initialized [ 5.669361] Bluetooth: SCO socket layer initialized [ 5.669646] uvcvideo: Found UVC 1.00 device (174f:5932) [ 5.673789] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 5.677456] input: UVC Camera (174f:5932) as /devices/pci0000:00/0000:00:1a.7/usb7/7-3/7-3:1.0/input/input8 [ 5.677820] usbcore: registered new interface driver uvcvideo [ 5.677823] USB Video Class driver (1.1.1) [ 5.680428] tpm_tis 00:0b: Adjusting TPM timeout parameters. [ 5.836244] ALSA patch_realtek.c:1207 SKU: Nid=0x1d sku_cfg=0x4015860d [ 5.836249] ALSA patch_realtek.c:1209 SKU: port_connectivity=0x1 [ 5.836251] ALSA patch_realtek.c:1210 SKU: enable_pcbeep=0x1 [ 5.836254] ALSA patch_realtek.c:1211 SKU: check_sum=0x00000005 [ 5.836257] ALSA patch_realtek.c:1212 SKU: customization=0x00000086 [ 5.836260] ALSA patch_realtek.c:1213 SKU: external_amp=0x1 [ 5.836262] ALSA patch_realtek.c:1214 SKU: platform_type=0x1 [ 5.836265] ALSA patch_realtek.c:1215 SKU: swap=0x0 [ 5.836268] ALSA patch_realtek.c:1216 SKU: override=0x1 [ 5.836338] hda_codec: ALC262: BIOS auto-probing. [ 5.836345] ALSA hda_codec.c:4873 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.836348] ALSA hda_codec.c:4877 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.836351] ALSA hda_codec.c:4881 hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 5.836354] ALSA hda_codec.c:4882 mono: mono_out=0x0 [ 5.836356] ALSA hda_codec.c:4886 inputs: [ 5.836359] ALSA hda_codec.c:4890 Mic=0x18 [ 5.836362] ALSA hda_codec.c:4890 Internal Mic=0x19 [ 5.836365] ALSA hda_codec.c:4892 [ 5.838296] ALSA patch_realtek.c:1270 realtek: No valid SSID, checking pincfg 0x4015860d for NID 0x1d [ 5.838300] ALSA patch_realtek.c:1286 realtek: Enabling init ASM_ID=0x860d CODEC_ID=10ec0262 [ 6.034063] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.034145] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 6.034462] xen: registering gsi 19 triggering 0 polarity 1 [ 6.034469] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 6.034471] xen: --> pirq=19 -> irq=19 (gsi=19) [ 6.034474] Already setup the GSI :19 [ 6.034479] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 6.114442] Intel AES-NI instructions are not detected. [ 6.125539] padlock_aes: VIA PadLock not detected. [ 6.164043] usbcore: registered new interface driver btusb [ 6.536574] Event-channel device installed. [ 6.758011] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 6.821587] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.519088] Adding 6127612k swap on /dev/mapper/vg_dom0-lv_swap. Priority:-1 extents:1 across:6127612k [ 8.215373] XENBUS: Unable to read cpu state [ 8.216618] XENBUS: Unable to read cpu state [ 42.831917] [drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - Unknown fault at address 00213d1000 [ 42.831922] [drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00020000, e20: 00000011, e24: 0c030000 [ 42.831925] [drm] nouveau 0000:01:00.0: PGRAPH - TRAP [ 42.831931] [drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000810000) subc 2 class 0x502d mthd 0x0860 data 0x3f000000 [ 42.831945] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213d1000 on ch 2 [0x00000810] PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT [ 42.831978] [drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - Unknown fault at address 00213d1900 [ 42.831982] [drm] nouveau 0000:01:00.0: PGRAPH_TRAP_TPDMA_2D - TP 0 - e0c: 00000000, e18: 00000000, e1c: 00060010, e20: 00000011, e24: 0c030000 [ 42.831985] [drm] nouveau 0000:01:00.0: PGRAPH - TRAP [ 42.831990] [drm] nouveau 0000:01:00.0: PGRAPH - ch 2 (0x0000810000) subc 2 class 0x502d mthd 0x0860 data 0xff414140 [ 42.832002] [drm] nouveau 0000:01:00.0: VM: trapped write at 0x00213d1200 on ch 2 [0x00000810] PGRAPH/PROP/DST2D reason: PAGE_NOT_PRESENT [ 43.304767] hda-intel: Invalid position buffer, using LPIB read method instead. [ 161.224148] pciback 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 161.224204] pciback 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 161.268362] xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0 [ 161.269098] xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1 [ 161.987342] xen-blkback:ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 161.993733] xen-blkback:ring-ref 10, event-channel 10, protocol 1 (x86_64-abi) [ 162.001791] xen-blkback:ring-ref 11, event-channel 11, protocol 1 (x86_64-abi) [ 162.006132] xen-blkback:ring-ref 12, event-channel 12, protocol 1 (x86_64-abi) [ 165.899221] pciback 0000:06:00.0: enabling device (0000 -> 0003) [ 165.899258] xen: registering gsi 19 triggering 0 polarity 1 [ 165.899268] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 165.899272] xen: --> pirq=19 -> irq=19 (gsi=19) [ 165.899277] Already setup the GSI :19 [ 165.899283] pciback 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 165.899661] pciback 0000:06:00.0: setting latency timer to 64 [ 166.356790] pciback 0000:02:00.0: enabling device (0000 -> 0002) [ 166.356808] xen: registering gsi 16 triggering 0 polarity 1 [ 166.356819] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 166.356823] xen: --> pirq=16 -> irq=16 (gsi=16) [ 166.356828] Already setup the GSI :16 [ 166.356834] pciback 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 166.357012] pciback 0000:02:00.0: setting latency timer to 64 [ 166.357199] pciback 0000:02:00.0: Driver tried to write to a read-only configuration space field at offset 0x41, size 1. This may be harmless, but if you have problems with your device: [ 166.357202] 1) see permissive attribute in sysfs [ 166.357204] 2) report problems to the xen-devel mailing list along with details of your device obtained from lspci. [ 171.925207] xen-blkback:ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 171.931751] xen-blkback:ring-ref 10, event-channel 10, protocol 1 (x86_64-abi) [ 171.942020] xen-blkback:ring-ref 11, event-channel 11, protocol 1 (x86_64-abi) [ 171.948935] xen-blkback:ring-ref 12, event-channel 12, protocol 1 (x86_64-abi) [ 199.164196] pciback 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 199.164364] pciback 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 199.164420] pciback 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 209.656934] pciback 0000:06:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100007) [ 219.694661] pciback 0000:02:00.0: PCI INT A disabled [ 219.694721] pciback 0000:06:00.0: PCI INT A disabled [ 238.828219] pciback 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 238.828356] pciback 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 238.830891] pciback 0000:06:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100000) [ 238.850793] xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0 [ 238.851805] pciback 0000:02:00.0: device has been assigned to another domain! Over-writting the ownership, but beware. [ 238.853356] xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1 [ 238.854980] pciback 0000:06:00.0: device has been assigned to another domain! Over-writting the ownership, but beware. [ 239.688750] xen-blkback:ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 239.698953] xen-blkback:ring-ref 10, event-channel 10, protocol 1 (x86_64-abi) [ 239.703352] xen-blkback:ring-ref 11, event-channel 11, protocol 1 (x86_64-abi) [ 239.707511] xen-blkback:ring-ref 12, event-channel 12, protocol 1 (x86_64-abi) [ 243.872146] pciback 0000:06:00.0: BAR 0: set to [mem 0xfa000000-0xfa003fff 64bit] (PCI address [0xfa000000-0xfa003fff]) [ 243.872176] pciback 0000:06:00.0: BAR 2: set to [io 0x5000-0x50ff] (PCI address [0x5000-0x50ff]) [ 243.874751] pciback 0000:06:00.0: enabling device (0000 -> 0003) [ 243.874777] xen: registering gsi 19 triggering 0 polarity 1 [ 243.874784] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 243.874786] xen: --> pirq=19 -> irq=19 (gsi=19) [ 243.874789] Already setup the GSI :19 [ 243.874793] pciback 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 243.875036] pciback 0000:06:00.0: setting latency timer to 64 [ 243.981714] pciback 0000:02:00.0: enabling device (0000 -> 0002) [ 243.981746] xen: registering gsi 16 triggering 0 polarity 1 [ 243.981754] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 243.981756] xen: --> pirq=16 -> irq=16 (gsi=16) [ 243.981759] Already setup the GSI :16 [ 243.981763] pciback 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 243.981990] pciback 0000:02:00.0: setting latency timer to 64 [ 249.851593] xen-blkback:ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 249.885471] xen-blkback:ring-ref 10, event-channel 10, protocol 1 (x86_64-abi) [ 249.888640] xen-blkback:ring-ref 11, event-channel 11, protocol 1 (x86_64-abi) [ 249.893655] xen-blkback:ring-ref 12, event-channel 12, protocol 1 (x86_64-abi) [ 277.096196] pciback 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 277.096330] pciback 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 277.096386] pciback 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 287.126309] pciback 0000:06:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100007) [ 297.172966] pciback 0000:02:00.0: PCI INT A disabled [ 297.173052] pciback 0000:06:00.0: PCI INT A disabled [ 316.724434] pciback 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 316.724564] pciback 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf6000004) [ 316.727395] pciback 0000:06:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100000) [ 316.741216] xen-pciback: vpci: 0000:02:00.0: assign to virtual slot 0 [ 316.743004] pciback 0000:02:00.0: device has been assigned to another domain! Over-writting the ownership, but beware. [ 316.743594] xen-pciback: vpci: 0000:06:00.0: assign to virtual slot 1 [ 316.744467] pciback 0000:06:00.0: device has been assigned to another domain! Over-writting the ownership, but beware. [ 317.172361] xen-blkback:ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 317.180186] xen-blkback:ring-ref 10, event-channel 10, protocol 1 (x86_64-abi) [ 317.191362] xen-blkback:ring-ref 11, event-channel 11, protocol 1 (x86_64-abi) [ 317.199277] xen-blkback:ring-ref 12, event-channel 12, protocol 1 (x86_64-abi)