domid: 1
Using file /dev/xen/blktap-2/tapdev0 in read-write mode
Using file /dev/xen/blktap-2/tapdev1 in read-only mode
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
Watching /local/domain/1/cpu
char device redirected to /dev/pts/2
qemu_map_cache_init nr_buckets = 10000 size 4194304
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = ef4fbe6e-ade5-4e11-804d-e6dff749fe24
xen be core: xen be core: can't open gnttab device
can't open gnttab device
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/ef4fbe6e-ade5-4e11-804d-e6dff749fe24/vncpasswd.
medium change watch on `hdc' (index: 1): /dev/xen/blktap-2/tapdev1
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev 
register_real_device: Assigning real physical device 03:00.0 ...
pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul: No such file or directory: 0x3:0x0.0x0
pt_register_regions: IO region registered (size=0x01000000 base_addr=0xc2000000)
pt_register_regions: IO region registered (size=0x10000000 base_addr=0xe000000c)
pt_register_regions: IO region registered (size=0x02000000 base_addr=0xc0000004)
pt_register_regions: IO region registered (size=0x00000080 base_addr=0x00002001)
pcilib: Cannot open /sys/bus/pci/devices/0000:00:02.0/config
pcilib: Cannot open /sys/bus/pci/devices/0000:00:02.0/config
gfx_claim_vga_cycle: bridge for bus 7, previous bridge control is 0
gfx_claim_vga_cycle: bus=0x0, dev=0x1e, func=0x0
gfx_claim_vga_cycle: bridge for bus 7, updated bridge control is 0
gfx_claim_vga_cycle: bridge for bus 3, previous bridge control is 0
gfx_claim_vga_cycle: bus=0x0, dev=0x7, func=0x0
gfx_claim_vga_cycle: bridge for bus 3, updated bridge control is 18
gfx_claim_vga_cycle: bridge for bus 2, previous bridge control is 18
gfx_claim_vga_cycle: bus=0x0, dev=0x3, func=0x0
gfx_claim_vga_cycle: bridge for bus 2, updated bridge control is 0
gfx_claim_vga_cycle: bridge for bus 1, previous bridge control is 0
gfx_claim_vga_cycle: bus=0x0, dev=0x1, func=0x0
gfx_claim_vga_cycle: bridge for bus 1, updated bridge control is 0
gfx_claim_vga_cycle: previous igd control is d1
gfx_claim_vga_cycle: updated igd control is d3
pci_intx: intx=255
pci_intx: Interrupt pin read from hardware is out of range: value=255, acceptable range is 1 - 4
register_real_device: Real physical device 03:00.0 registered successfuly!
IRQ type = INTx
pt_bar_reg_read: first read BARs of gfx
pt_bar_reg_read: first read BARs of gfx
pt_bar_reg_read: first read BARs of gfx
pt_bar_reg_read: first read BARs of gfx
pt_iomem_map: e_phys=c2000000 maddr=c2000000 type=0 len=16777216 index=0 first_map=1
pt_iomem_map: e_phys=e0000000 maddr=e0000000 type=8 len=268435456 index=1 first_map=1
pt_iomem_map: e_phys=c0000000 maddr=c0000000 type=0 len=33554432 index=3 first_map=1
pt_ioport_map: e_phys=2000 pio_base=2000 len=128 index=5 first_map=1
pt_iomem_map: e_phys=f0000000 maddr=c0000000 type=0 len=33554432 index=3 first_map=0
pt_iomem_map: e_phys=f3000000 maddr=c2000000 type=0 len=16777216 index=0 first_map=0
pt_ioport_map: e_phys=c100 pio_base=2000 len=128 index=5 first_map=0
pt_pci_write_config: Warning: Guest attempt to set address to unused Base Address Register. [00:04.0][Offset:30h][Length:4]
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
pt_bar_reg_read: first read BARs of gfx
pt_bar_reg_read: first read BARs of gfx