__ __ _ _ ___ ____ \ \/ /___ _ __ | || | / _ \ |___ \ \ // _ \ '_ \ | || |_| | | | __) | / \ __/ | | | |__ _| |_| | / __/ /_/\_\___|_| |_| |_|(_)___(_)_____| (XEN) Xen version 4.0.2 (root@(none)) (gcc version 4.4.5 (Debian 4.4.5-8) ) Mon Aug 1 11:16:18 CEST 2011 (XEN) Latest ChangeSet: unavailable (XEN) Console output is synchronous. (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: dom0_mem=4000M loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 sync_console console_to_ring lapic=debug apic_verbosity=debug apic=debug iommu=off (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 6 MBR signatures (XEN) Found 6 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 0000000000099800 (usable) (XEN) 0000000000099800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000008c3a0000 (usable) (XEN) 000000008c3a0000 - 000000008c47b000 (ACPI NVS) (XEN) 000000008c47b000 - 000000008c560000 (ACPI data) (XEN) 000000008c560000 - 000000008d960000 (ACPI NVS) (XEN) 000000008d960000 - 000000008f602000 (ACPI data) (XEN) 000000008f602000 - 000000008f64f000 (reserved) (XEN) 000000008f64f000 - 000000008f6e7000 (ACPI data) (XEN) 000000008f6e7000 - 000000008f6f1000 (ACPI NVS) (XEN) 000000008f6f1000 - 000000008f6f2000 (ACPI data) (XEN) 000000008f6f2000 - 000000008f7cf000 (ACPI NVS) (XEN) 000000008f7cf000 - 000000008f800000 (ACPI data) (XEN) 000000008f800000 - 0000000090000000 (reserved) (XEN) 00000000a0000000 - 00000000b0000000 (reserved) (XEN) 00000000fc000000 - 00000000fd000000 (reserved) (XEN) 00000000fed1c000 - 00000000fed44000 (reserved) (XEN) 00000000ff800000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000670000000 (usable) (XEN) ACPI: RSDP 000F0410, 0024 (r2 INTEL ) (XEN) ACPI: XSDT 8F7FD120, 008C (r1 INTEL S5520HC 0 1000013) (XEN) ACPI: FACP 8F7FB000, 00F4 (r4 INTEL S5520HC 0 MSFT 100000D) (XEN) ACPI: DSDT 8F7F4000, 6531 (r2 INTEL S5520HC 3 MSFT 100000D) (XEN) ACPI: FACS 8F6F2000, 0040 (XEN) ACPI: APIC 8F7F3000, 01A8 (r2 INTEL S5520HC 0 MSFT 100000D) (XEN) ACPI: MCFG 8F7F2000, 003C (r1 INTEL S5520HC 1 MSFT 100000D) (XEN) ACPI: HPET 8F7F1000, 0038 (r1 INTEL S5520HC 1 MSFT 100000D) (XEN) ACPI: SLIT 8F7F0000, 0030 (r1 INTEL S5520HC 1 MSFT 100000D) (XEN) ACPI: SPCR 8F7EF000, 0050 (r1 INTEL S5520HC 0 MSFT 100000D) (XEN) ACPI: WDDT 8F7EE000, 0040 (r1 INTEL S5520HC 0 MSFT 100000D) (XEN) ACPI: SSDT 8F7D3000, 1AFC4 (r2 INTEL SSDT PM 4000 INTL 20061109) (XEN) ACPI: SSDT 8F7D2000, 01D8 (r2 INTEL IPMI 4000 INTL 20061109) (XEN) ACPI: HEST 8F7D1000, 00A8 (r1 INTEL S5520HC 1 INTL 1) (XEN) ACPI: BERT 8F7D0000, 0030 (r1 INTEL S5520HC 1 INTL 1) (XEN) ACPI: ERST 8F7CF000, 0230 (r1 INTEL S5520HC 1 INTL 1) (XEN) ACPI: EINJ 8F6F1000, 0130 (r1 INTEL S5520HC 1 INTL 1) (XEN) System RAM: 24515MB (25103588kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000670000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fda90 (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: wakeup_vec[8f6f200c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) (XEN) Processor #2 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) (XEN) Processor #16 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) (XEN) Processor #18 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) (XEN) Processor #20 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) (XEN) Processor #1 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) (XEN) Processor #3 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) (XEN) Processor #5 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) (XEN) Processor #17 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) (XEN) Processor #19 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) (XEN) Processor #21 6:12 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) (XEN) Overriding APIC driver with bigsmp (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a401 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at a0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) mapped APIC to ffff82c3ffffe000 (fee00000) (XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000) (XEN) mapped IOAPIC to ffff82c3ffffc000 (fec90000) (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2400.034 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) - Unrestricted Guest (XEN) EPT supports 2MB super page. (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled (XEN) I/O virtualisation disabled (XEN) Getting VERSION: 1060015 (XEN) Getting VERSION: 1060015 (XEN) Enabled directed EOI with ioapic_ack_old on! (XEN) Getting ID: 0 (XEN) Getting LVT0: 700 (XEN) Getting LVT1: 400 (XEN) Suppress EOI broadcast on CPU#0 (XEN) enabled ExtINT on CPU#0 (XEN) Suppress EOI broadcast on CPU#1 (XEN) masked ExtINT on CPU#1 (XEN) Suppress EOI broadcast on CPU#2 (XEN) masked ExtINT on CPU#2 (XEN) Suppress EOI broadcast on CPU#3 (XEN) masked ExtINT on CPU#3 (XEN) Suppress EOI broadcast on CPU#4 (XEN) masked ExtINT on CPU#4 (XEN) Suppress EOI broadcast on CPU#5 (XEN) masked ExtINT on CPU#5 (XEN) Suppress EOI broadcast on CPU#6 (XEN) masked ExtINT on CPU#6 (XEN) Suppress EOI broadcast on CPU#7 (XEN) masked ExtINT on CPU#7 (XEN) Suppress EOI broadcast on CPU#8 (XEN) masked ExtINT on CPU#8 (XEN) Suppress EOI broadcast on CPU#9 (XEN) masked ExtINT on CPU#9 (XEN) Suppress EOI broadcast on CPU#10 (XEN) masked ExtINT on CPU#10 (XEN) Suppress EOI broadcast on CPU#11 (XEN) masked ExtINT on CPU#11 (XEN) Total of 12 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using old ACK method (XEN) init IO_APIC IRQs (XEN) IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22, 9-23 not connected. (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) number of MP IRQ sources: 15. (XEN) number of IO-APIC #8 registers: 24. (XEN) number of IO-APIC #9 registers: 24. (XEN) testing the IO APIC....................... (XEN) IO APIC #8...... (XEN) .... register #00: 08000000 (XEN) ....... : physical APIC id: 08 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 0D4 04 1 0 0 0 0 0 2 C3 (XEN) 01 000 00 0 0 0 0 0 0 0 28 (XEN) 02 000 00 0 0 0 0 0 0 0 F0 (XEN) 03 000 00 0 0 0 0 0 0 0 30 (XEN) 04 000 00 0 0 0 0 0 0 0 F1 (XEN) 05 000 00 0 0 0 0 0 0 0 38 (XEN) 06 000 00 0 0 0 0 0 0 0 40 (XEN) 07 000 00 0 0 0 0 0 0 0 48 (XEN) 08 000 00 0 0 0 0 0 0 0 50 (XEN) 09 000 00 1 1 0 0 0 0 0 58 (XEN) 0a 000 00 0 0 0 0 0 0 0 60 (XEN) 0b 000 00 0 0 0 0 0 0 0 68 (XEN) 0c 000 00 0 0 0 0 0 0 0 70 (XEN) 0d 000 00 0 0 0 0 0 0 0 78 (XEN) 0e 000 00 0 0 0 0 0 0 0 88 (XEN) 0f 000 00 0 0 0 0 0 0 0 90 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 044 04 1 0 0 0 0 0 2 20 (XEN) IO APIC #9...... (XEN) .... register #00: 09000000 (XEN) ....... : physical APIC id: 09 (XEN) ....... : Delivery Type: 0 (XEN) ....... : LTS : 0 (XEN) .... register #01: 00170020 (XEN) ....... : max redirection entries: 0017 (XEN) ....... : PRQ implemented: 0 (XEN) ....... : IO APIC version: 0020 (XEN) .... register #02: 00000000 (XEN) ....... : arbitration: 00 (XEN) .... register #03: 00000001 (XEN) ....... : Boot DT : 1 (XEN) .... IRQ redirection table: (XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: (XEN) 00 000 00 1 0 0 0 0 0 0 00 (XEN) 01 000 00 1 0 0 0 0 0 0 00 (XEN) 02 000 00 1 0 0 0 0 0 0 00 (XEN) 03 000 00 1 0 0 0 0 0 0 00 (XEN) 04 000 00 1 0 0 0 0 0 0 00 (XEN) 05 000 00 1 0 0 0 0 0 0 00 (XEN) 06 000 00 1 0 0 0 0 0 0 00 (XEN) 07 000 00 1 0 0 0 0 0 0 00 (XEN) 08 000 00 1 0 0 0 0 0 0 00 (XEN) 09 000 00 1 0 0 0 0 0 0 00 (XEN) 0a 000 00 1 0 0 0 0 0 0 00 (XEN) 0b 000 00 1 0 0 0 0 0 0 00 (XEN) 0c 000 00 1 0 0 0 0 0 0 00 (XEN) 0d 000 00 1 0 0 0 0 0 0 00 (XEN) 0e 000 00 1 0 0 0 0 0 0 00 (XEN) 0f 000 00 1 0 0 0 0 0 0 00 (XEN) 10 000 00 1 0 0 0 0 0 0 00 (XEN) 11 000 00 1 0 0 0 0 0 0 00 (XEN) 12 000 00 1 0 0 0 0 0 0 00 (XEN) 13 000 00 1 0 0 0 0 0 0 00 (XEN) 14 000 00 1 0 0 0 0 0 0 00 (XEN) 15 000 00 1 0 0 0 0 0 0 00 (XEN) 16 000 00 1 0 0 0 0 0 0 00 (XEN) 17 000 00 1 0 0 0 0 0 0 00 (XEN) Using vector-based indexing (XEN) IRQ to pin mappings: (XEN) IRQ240 -> 0:2 (XEN) IRQ40 -> 0:1 (XEN) IRQ48 -> 0:3 (XEN) IRQ241 -> 0:4 (XEN) IRQ56 -> 0:5 (XEN) IRQ64 -> 0:6 (XEN) IRQ72 -> 0:7 (XEN) IRQ80 -> 0:8 (XEN) IRQ88 -> 0:9 (XEN) IRQ96 -> 0:10 (XEN) IRQ104 -> 0:11 (XEN) IRQ112 -> 0:12 (XEN) IRQ120 -> 0:13 (XEN) IRQ136 -> 0:14 (XEN) IRQ144 -> 0:15 (XEN) .................................... done. (XEN) Using local APIC timer interrupts. (XEN) calibrating APIC timer ... (XEN) ..... CPU clock speed is 2399.9976 MHz. (XEN) ..... host bus clock speed is 133.3331 MHz. (XEN) ..... bus_scale = 0x00008888 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET �(XEN) Allocated console ring of 128 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU7 resumed (XEN) microcode.c:73:d32767 microcode: CPU5 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) microcode.c:73:d32767 microcode: CPU8 resumed (XEN) microcode.c:73:d32767 microcode: CPU11 resumed (XEN) microcode.c:73:d32767 microcode: CPU10 resumed (XEN) microcode.c:73:d32767 microcode: CPU6 resumed (XEN) microcode.c:73:d32767 microcode: CPU4 resumed (XEN) Brought up 12 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU9 resumed (XEN) Turbo Mode detected! (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1921000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000420000000->0000000440000000 (892928 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81921000 (XEN) Init. ramdisk: ffffffff81921000->ffffffff9795dc00 (XEN) Phys-Mach map: ffffffff9795e000->ffffffff9812e000 (XEN) Start info: ffffffff9812e000->ffffffff9812e4b4 (XEN) Page tables: ffffffff9812f000->ffffffff981f4000 (XEN) Boot stack: ffffffff981f4000->ffffffff981f5000 (XEN) TOTAL: ffffffff80000000->ffffffff98400000 (XEN) ENTRY ADDRESS: ffffffff81693200 (XEN) Dom0 has maximum 12 VCPUs (XEN) Scrubbing Free RAM: ..........................................................................................................................................................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 176kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0 (root@zv3n) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon Aug 1 20:35:28 CEST 2011 [ 0.000000] Command line: root=LABEL=2ven_root ro rootdelay=5 cryptopts=source=UUID=85d60a1f-208a-4b05-b6d5-0bf096413078,target=raid10_crypt,lvm=zven-2ven_root console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 0.000000] xen_release_chunk: looking at area pfn 90000-a0000: 65536 pages freed [ 0.000000] xen_release_chunk: looking at area pfn b0000-fa000: 303104 pages freed [ 0.000000] released 368640 pages of unused memory [ 0.000000] Set 474310 page(s) to 1-1 mapping. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000000099000 (usable) [ 0.000000] Xen: 0000000000099800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 000000008c3a0000 (usable) [ 0.000000] Xen: 000000008c3a0000 - 000000008c47b000 (ACPI NVS) [ 0.000000] Xen: 000000008c47b000 - 000000008c560000 (ACPI data) [ 0.000000] Xen: 000000008c560000 - 000000008d960000 (ACPI NVS) [ 0.000000] Xen: 000000008d960000 - 000000008f602000 (ACPI data) [ 0.000000] Xen: 000000008f602000 - 000000008f64f000 (reserved) [ 0.000000] Xen: 000000008f64f000 - 000000008f6e7000 (ACPI data) [ 0.000000] Xen: 000000008f6e7000 - 000000008f6f1000 (ACPI NVS) [ 0.000000] Xen: 000000008f6f1000 - 000000008f6f2000 (ACPI data) [ 0.000000] Xen: 000000008f6f2000 - 000000008f7cf000 (ACPI NVS) [ 0.000000] Xen: 000000008f7cf000 - 000000008f800000 (ACPI data) [ 0.000000] Xen: 000000008f800000 - 0000000090000000 (reserved) [ 0.000000] Xen: 00000000a0000000 - 00000000b0000000 (reserved) [ 0.000000] Xen: 00000000fc000000 - 00000000fd000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec90000 - 00000000fec91000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed44000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000006ca000000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6ca000 max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0x8c3a0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000fda90] fda90 [ 0.000000] initial memory mapped : 0 - 1795e000 [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000008c3a0000 [ 0.000000] 0000000000 - 008c3a0000 page 4k [ 0.000000] kernel direct mapping tables up to 8c3a0000 @ 8bf3a000-8c3a0000 [ 0.000000] xen: setting RW the range 8c2d8000 - 8c3a0000 [ 0.000000] init_memory_mapping: 0000000100000000-00000006ca000000 [ 0.000000] 0100000000 - 06ca000000 page 4k [ 0.000000] kernel direct mapping tables up to 6ca000000 @ 888cd000-8bf3a000 [ 0.000000] xen: setting RW the range 8b735000 - 8bf3a000 [ 0.000000] RAMDISK: 01921000 - 1795e000 [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 000000008f7fd120 0008C (v01 INTEL S5520HC 00000000 01000013) [ 0.000000] ACPI: FACP 000000008f7fb000 000F4 (v04 INTEL S5520HC 00000000 MSFT 0100000D) [ 0.000000] ACPI: DSDT 000000008f7f4000 06531 (v02 INTEL S5520HC 00000003 MSFT 0100000D) [ 0.000000] ACPI: FACS 000000008f6f2000 00040 [ 0.000000] ACPI: APIC 000000008f7f3000 001A8 (v02 INTEL S5520HC 00000000 MSFT 0100000D) [ 0.000000] ACPI: MCFG 000000008f7f2000 0003C (v01 INTEL S5520HC 00000001 MSFT 0100000D) [ 0.000000] ACPI: HPET 000000008f7f1000 00038 (v01 INTEL S5520HC 00000001 MSFT 0100000D) [ 0.000000] ACPI: SLIT 000000008f7f0000 00030 (v01 INTEL S5520HC 00000001 MSFT 0100000D) [ 0.000000] ACPI: SPCR 000000008f7ef000 00050 (v01 INTEL S5520HC 00000000 MSFT 0100000D) [ 0.000000] ACPI: WDDT 000000008f7ee000 00040 (v01 INTEL S5520HC 00000000 MSFT 0100000D) [ 0.000000] ACPI: SSDT 000000008f7d3000 1AFC4 (v02 INTEL SSDT PM 00004000 INTL 20061109) [ 0.000000] ACPI: SSDT 000000008f7d2000 001D8 (v02 INTEL IPMI 00004000 INTL 20061109) [ 0.000000] ACPI: HEST 000000008f7d1000 000A8 (v01 INTEL S5520HC 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 000000008f7d0000 00030 (v01 INTEL S5520HC 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 000000008f7cf000 00230 (v01 INTEL S5520HC 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 000000008f6f1000 00130 (v01 INTEL S5520HC 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] NUMA: Initialized distance table, cnt=1 [ 0.000000] NUMA: Warning: invalid distance parameter, from=-1 to=-1 distance=21 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000006ca000000 [ 0.000000] Initmem setup node 0 0000000000000000-00000006ca000000 [ 0.000000] NODE_DATA [000000008c39b000 - 000000008c39ffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x006ca000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000099 [ 0.000000] 0: 0x00000100 -> 0x0008c3a0 [ 0.000000] 0: 0x00100000 -> 0x006ca000 [ 0.000000] On node 0 totalpages: 6644521 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3916 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 555992 pages, LIFO batch:31 [ 0.000000] Normal zone: 82992 pages used for memmap [ 0.000000] Normal zone: 5987280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 255, address 0xfec90000, GSI 24-279 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 296 [ 0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000 [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000008c3a0000 - 000000008c47b000 [ 0.000000] PM: Registered nosave memory: 000000008c47b000 - 000000008c560000 [ 0.000000] PM: Registered nosave memory: 000000008c560000 - 000000008d960000 [ 0.000000] PM: Registered nosave memory: 000000008d960000 - 000000008f602000 [ 0.000000] PM: Registered nosave memory: 000000008f602000 - 000000008f64f000 [ 0.000000] PM: Registered nosave memory: 000000008f64f000 - 000000008f6e7000 [ 0.000000] PM: Registered nosave memory: 000000008f6e7000 - 000000008f6f1000 [ 0.000000] PM: Registered nosave memory: 000000008f6f1000 - 000000008f6f2000 [ 0.000000] PM: Registered nosave memory: 000000008f6f2000 - 000000008f7cf000 [ 0.000000] PM: Registered nosave memory: 000000008f7cf000 - 000000008f800000 [ 0.000000] PM: Registered nosave memory: 000000008f800000 - 0000000090000000 [ 0.000000] PM: Registered nosave memory: 0000000090000000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000 [ 0.000000] PM: Registered nosave memory: 00000000fd000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec90000 [ 0.000000] PM: Registered nosave memory: 00000000fec90000 - 00000000fec91000 [ 0.000000] PM: Registered nosave memory: 00000000fec91000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed44000 [ 0.000000] PM: Registered nosave memory: 00000000fed44000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.2 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88008bc6a000 s78528 r8192 d23872 u110592 [ 0.000000] pcpu-alloc: s78528 r8192 d23872 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 10.072202] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6547188 [ 10.081179] Policy zone: Normal [ 10.084670] Kernel command line: root=LABEL=2ven_root ro rootdelay=5 cryptopts=source=UUID=85d60a1f-208a-4b05-b6d5-0bf096413078,target=raid10_crypt,lvm=zven-2ven_root console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10 [ 10.108280] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 10.140077] Placing 64MB software IO TLB between ffff88006b000000 - ffff88006f000000 [ 10.148529] software IO TLB at phys 0x6b000000 - 0x6f000000 [ 10.159612] Memory: 1432856k/28475392k available (3277k kernel code, 1897308k absent, 25145228k reserved, 3368k data, 572k init) [ 10.172421] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1 [ 10.180999] Hierarchical RCU implementation. [ 10.185718] NR_IRQS:33024 nr_irqs:5224 16 [ 10.190243] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 10.196856] xen: registering gsi 9 triggering 0 polarity 0 [ 10.202967] xen: --> pirq=9 -> irq=9 (gsi=9) (XEN) IOAPIC[0]: Set PCI routing entry (8-9 -> 0x58 -> IRQ 9 Mode:1 Active:0) [ 10.215374] xen: acpi sci 9 [ 10.218478] xen: --> pirq=1 -> irq=1 (gsi=1) [ 10.223227] xen: --> pirq=2 -> irq=2 (gsi=2) [ 10.227977] xen: --> pirq=3 -> irq=3 (gsi=3) [ 10.232731] xen: --> pirq=4 -> irq=4 (gsi=4) [ 10.237480] xen: --> pirq=5 -> irq=5 (gsi=5) [ 10.242230] xen: --> pirq=6 -> irq=6 (gsi=6) [ 10.246984] xen: --> pirq=7 -> irq=7 (gsi=7) [ 10.251732] xen: --> pirq=8 -> irq=8 (gsi=8) [ 10.256481] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 10.262301] xen: --> pirq=9 -> irq=9 (gsi=9) [ 10.267051] xen: --> pirq=10 -> irq=10 (gsi=10) [ 10.272093] xen: --> pirq=11 -> irq=11 (gsi=11) [ 10.277137] xen: --> pirq=12 -> irq=12 (gsi=12) [ 10.282176] xen: --> pirq=13 -> irq=13 (gsi=13) [ 10.287220] xen: --> pirq=14 -> irq=14 (gsi=14) [ 10.292260] xen: --> pirq=15 -> irq=15 (gsi=15) [ 10.297329] Console: colour dummy device 80x25 [ 10.302246] console [hvc0] enabled, bootconsole disabled [ 10.302246] console [hvc0] enabled, bootconsole disabled [ 10.314197] Xen: using vcpuop timer interface [ 10.319117] installing Xen timer for CPU 0 [ 10.323792] Detected 2400.034 MHz processor. [ 10.328620] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.06 BogoMIPS (lpj=9600136) [ 10.340572] pid_max: default: 32768 minimum: 301 [ 10.345851] Security Framework initialized [ 10.350460] SELinux: Disabled at boot. [ 10.365403] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 10.384446] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 10.395287] Mount-cache hash table entries: 256 [ 10.400439] Initializing cgroup subsys cpuacct [ 10.405306] Initializing cgroup subsys devices [ 10.410342] Initializing cgroup subsys freezer [ 10.415383] Initializing cgroup subsys net_cls [ 10.420483] CPU: Physical Processor ID: 0 [ 10.424977] CPU: Processor Core ID: 0 [ 10.430024] ACPI: Core revision 20110413 [ 10.459568] calling trace_init_flags_sys_exit+0x0/0xd @ 1 [ 10.465592] initcall trace_init_flags_sys_exit+0x0/0xd returned 0 after 0 usecs [ 10.473830] calling trace_init_flags_sys_enter+0x0/0xd @ 1 [ 10.480133] initcall trace_init_flags_sys_enter+0x0/0xd returned 0 after 0 usecs [ 10.488470] calling init_hw_perf_events+0x0/0xece @ 1 [ 10.494286] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only. [ 10.504177] initcall init_hw_perf_events+0x0/0xece returned 0 after 0 usecs [ 10.512031] calling migration_init+0x0/0x67 @ 1 [ 10.517266] initcall migration_init+0x0/0x67 returned 0 after 0 usecs [ 10.524538] calling spawn_ksoftirqd+0x0/0x4c @ 1 [ 10.529897] initcall spawn_ksoftirqd+0x0/0x4c returned 0 after 3906 usecs [ 10.537532] calling init_workqueues+0x0/0x2bd @ 1 [ 10.543030] initcall init_workqueues+0x0/0x2bd returned 0 after 3906 usecs [ 10.550716] calling cpu_stop_init+0x0/0x9f @ 1 [ 10.555885] initcall cpu_stop_init+0x0/0x9f returned 0 after 3906 usecs [ 10.563321] calling rcu_scheduler_really_started+0x0/0xd @ 1 [ 10.569816] initcall rcu_scheduler_really_started+0x0/0xd returned 0 after 0 usecs [ 10.578348] calling relay_init+0x0/0x14 @ 1 [ 10.583196] initcall relay_init+0x0/0x14 returned 0 after 0 usecs [ 10.590081] calling tracer_alloc_buffers+0x0/0x180 @ 1 [ 10.596014] initcall tracer_alloc_buffers+0x0/0x180 returned 0 after 0 usecs [ 10.603945] calling init_trace_printk+0x0/0x12 @ 1 [ 10.609472] initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs [ 10.617096] installing Xen timer for CPU 1 [ 10.621866] installing Xen timer for CPU 2 [ 10.626506] installing Xen timer for CPU 3 [ 10.631160] installing Xen timer for CPU 4 [ 10.635811] installing Xen timer for CPU 5 [ 10.640463] installing Xen timer for CPU 6 [ 10.645137] installing Xen timer for CPU 7 [ 10.649767] installing Xen timer for CPU 8 [ 10.654421] installing Xen timer for CPU 9 [ 10.659079] installing Xen timer for CPU 10 [ 10.663833] installing Xen timer for CPU 11 [ 10.668525] Brought up 12 CPUs [ 10.672272] devtmpfs: initialized [ 10.680448] calling init_mmap_min_addr+0x0/0x21 @ 1 [ 10.685889] initcall init_mmap_min_addr+0x0/0x21 returned 0 after 0 usecs [ 10.693547] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1 [ 10.701015] initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs [ 10.710514] calling net_ns_init+0x0/0xed @ 1 [ 10.715504] initcall net_ns_init+0x0/0xed returned 0 after 3906 usecs [ 10.722730] calling e820_mark_nvs_memory+0x0/0x36 @ 1 [ 10.728548] PM: Registering ACPI NVS region at 8c3a0000 (897024 bytes) [ 10.735944] PM: Registering ACPI NVS region at 8c560000 (20971520 bytes) [ 10.744019] PM: Registering ACPI NVS region at 8f6e7000 (40960 bytes) [ 10.751107] PM: Registering ACPI NVS region at 8f6f2000 (905216 bytes) [ 10.758510] initcall e820_mark_nvs_memory+0x0/0x36 returned 0 after 11719 usecs [ 10.766715] calling cpufreq_tsc+0x0/0x37 @ 1 [ 10.771662] initcall cpufreq_tsc+0x0/0x37 returned 0 after 0 usecs [ 10.778641] calling pci_reboot_init+0x0/0x14 @ 1 [ 10.783974] initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs [ 10.791343] calling init_lapic_sysfs+0x0/0x20 @ 1 [ 10.796772] initcall init_lapic_sysfs+0x0/0x20 returned 0 after 0 usecs [ 10.804238] calling init_smp_flush+0x0/0x38 @ 1 [ 10.809474] initcall init_smp_flush+0x0/0x38 returned 0 after 0 usecs [ 10.816746] calling alloc_frozen_cpus+0x0/0x3 @ 1 [ 10.822174] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs [ 10.829639] calling sysctl_init+0x0/0x32 @ 1 [ 10.834623] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs [ 10.841565] calling ksysfs_init+0x0/0x8a @ 1 [ 10.846516] initcall ksysfs_init+0x0/0x8a returned 0 after 0 usecs [ 10.853491] calling init_jiffies_clocksource+0x0/0x11 @ 1 [ 10.859698] initcall init_jiffies_clocksource+0x0/0x11 returned 0 after 0 usecs [ 10.867937] calling pm_init+0x0/0x64 @ 1 [ 10.872510] initcall pm_init+0x0/0x64 returned 0 after 3906 usecs [ 10.879378] calling pm_disk_init+0x0/0x18 @ 1 [ 10.884421] initcall pm_disk_init+0x0/0x18 returned 0 after 0 usecs [ 10.891499] calling swsusp_header_init+0x0/0x2c @ 1 [ 10.897121] initcall swsusp_header_init+0x0/0x2c returned 0 after 0 usecs [ 10.904780] calling init_zero_pfn+0x0/0x35 @ 1 [ 10.909919] initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs [ 10.917093] calling fsnotify_init+0x0/0x26 @ 1 [ 10.922234] initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs [ 10.929407] calling filelock_init+0x0/0x2f @ 1 [ 10.934558] initcall filelock_init+0x0/0x2f returned 0 after 3906 usecs [ 10.942011] calling init_script_binfmt+0x0/0x13 @ 1 [ 10.947634] initcall init_script_binfmt+0x0/0x13 returned 0 after 0 usecs [ 10.955293] calling init_elf_binfmt+0x0/0x13 @ 1 [ 10.960627] initcall init_elf_binfmt+0x0/0x13 returned 0 after 0 usecs [ 10.967995] calling init_compat_elf_binfmt+0x0/0x13 @ 1 [ 10.974007] initcall init_compat_elf_binfmt+0x0/0x13 returned 0 after 0 usecs [ 10.982053] calling debugfs_init+0x0/0x5d @ 1 [ 10.987099] initcall debugfs_init+0x0/0x5d returned 0 after 0 usecs [ 10.994174] calling securityfs_init+0x0/0x54 @ 1 [ 10.999509] initcall securityfs_init+0x0/0x54 returned 0 after 0 usecs [ 11.006875] calling random32_init+0x0/0xcb @ 1 [ 11.012015] initcall random32_init+0x0/0xcb returned 0 after 0 usecs [ 11.019190] calling sfi_sysfs_init+0x0/0xd1 @ 1 [ 11.024424] initcall sfi_sysfs_init+0x0/0xd1 returned 0 after 0 usecs [ 11.031696] calling __gnttab_init+0x0/0x24 @ 1 [ 11.036849] Grant table initialized [ 11.040811] initcall __gnttab_init+0x0/0x24 returned 0 after 3906 usecs [ 11.048275] calling regulator_init+0x0/0x61 @ 1 [ 11.053549] print_constraints: dummy: [ 11.057779] initcall regulator_init+0x0/0x61 returned 0 after 0 usecs [ 11.065048] calling cpufreq_core_init+0x0/0xa5 @ 1 [ 11.070578] initcall cpufreq_core_init+0x0/0xa5 returned 0 after 0 usecs [ 11.078137] calling cpuidle_init+0x0/0x36 @ 1 [ 11.083181] initcall cpuidle_init+0x0/0x36 returned 0 after 0 usecs [ 11.090258] calling sock_init+0x0/0x79 @ 1 [ 11.095046] initcall sock_init+0x0/0x79 returned 0 after 3906 usecs [ 11.102086] calling net_inuse_init+0x0/0x27 @ 1 [ 11.107326] initcall net_inuse_init+0x0/0x27 returned 0 after 0 usecs [ 11.114593] calling netpoll_init+0x0/0x2c @ 1 [ 11.119635] initcall netpoll_init+0x0/0x2c returned 0 after 0 usecs [ 11.126714] calling netlink_proto_init+0x0/0x192 @ 1 [ 11.132441] NET: Registered protocol family 16 [ 11.137486] initcall netlink_proto_init+0x0/0x192 returned 0 after 7812 usecs [ 11.145522] calling bdi_class_init+0x0/0x4e @ 1 [ 11.150764] initcall bdi_class_init+0x0/0x4e returned 0 after 0 usecs [ 11.158028] calling kobject_uevent_init+0x0/0x20 @ 1 [ 11.163756] initcall kobject_uevent_init+0x0/0x20 returned 0 after 3906 usecs [ 11.171797] calling pcibus_class_init+0x0/0x18 @ 1 [ 11.177329] initcall pcibus_class_init+0x0/0x18 returned 0 after 0 usecs [ 11.184885] calling pci_driver_init+0x0/0x11 @ 1 [ 11.190226] initcall pci_driver_init+0x0/0x11 returned 0 after 0 usecs [ 11.197587] calling backlight_class_init+0x0/0x5d @ 1 [ 11.203409] initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs [ 11.211257] calling xenbus_init+0x0/0x267 @ 1 [ 11.216391] initcall xenbus_init+0x0/0x267 returned 0 after 3906 usecs [ 11.223669] calling tty_class_init+0x0/0x38 @ 1 [ 11.228917] initcall tty_class_init+0x0/0x38 returned 0 after 3906 usecs [ 11.236466] calling vtconsole_class_init+0x0/0xb8 @ 1 [ 11.242298] initcall vtconsole_class_init+0x0/0xb8 returned 0 after 0 usecs [ 11.250138] calling wakeup_sources_debugfs_init+0x0/0x2b @ 1 [ 11.256635] initcall wakeup_sources_debugfs_init+0x0/0x2b returned 0 after 0 usecs [ 11.265165] calling register_node_type+0x0/0x23 @ 1 [ 11.270794] initcall register_node_type+0x0/0x23 returned 0 after 0 usecs [ 11.278447] calling spi_init+0x0/0x88 @ 1 [ 11.283112] initcall spi_init+0x0/0x88 returned 0 after 0 usecs [ 11.289791] calling amd_postcore_init+0x0/0x145 @ 1 [ 11.295415] initcall amd_postcore_init+0x0/0x145 returned 0 after 0 usecs [ 11.303074] calling arch_kdebugfs_init+0x0/0x24 @ 1 [ 11.308701] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 usecs [ 11.316357] calling configure_trampolines+0x0/0x26 @ 1 [ 11.322277] initcall configure_trampolines+0x0/0x26 returned 0 after 0 usecs [ 11.330223] calling mtrr_if_init+0x0/0x78 @ 1 [ 11.335292] initcall mtrr_if_init+0x0/0x78 returned -19 after 0 usecs [ 11.342562] calling ffh_cstate_init+0x0/0x2a @ 1 [ 11.347897] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs [ 11.355264] calling acpi_pci_init+0x0/0x61 @ 1 [ 11.360401] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 11.368935] ACPI: bus type pci registered [ 11.373491] initcall acpi_pci_init+0x0/0x61 returned 0 after 0 usecs [ 11.380665] calling dma_bus_init+0x0/0x3e @ 1 [ 11.385712] initcall dma_bus_init+0x0/0x3e returned 0 after 0 usecs [ 11.392786] calling dma_channel_table_init+0x0/0x106 @ 1 [ 11.398909] initcall dma_channel_table_init+0x0/0x106 returned 0 after 0 usecs [ 11.407038] calling setup_vcpu_hotplug_event+0x0/0x22 @ 1 [ 11.413243] initcall setup_vcpu_hotplug_event+0x0/0x22 returned 0 after 0 usecs [ 11.421484] calling register_xen_pci_notifier+0x0/0x32 @ 1 [ 11.427787] initcall register_xen_pci_notifier+0x0/0x32 returned 0 after 0 usecs [ 11.436125] calling dmi_id_init+0x0/0x303 @ 1 [ 11.441206] initcall dmi_id_init+0x0/0x303 returned 0 after 3906 usecs [ 11.448535] calling pci_arch_init+0x0/0x5f @ 1 [ 11.453707] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000) [ 11.464145] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820 [ 11.542188] PCI: Using configuration type 1 for base access [ 11.548309] initcall pci_arch_init+0x0/0x5f returned 0 after 74223 usecs [ 11.555868] calling topology_init+0x0/0x8a @ 1 [ 11.561762] initcall topology_init+0x0/0x8a returned 0 after 3906 usecs [ 11.569035] calling mtrr_init_finialize+0x0/0x36 @ 1 [ 11.574757] initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs [ 11.582512] calling init_vdso_vars+0x0/0xe6 @ 1 [ 11.587749] initcall init_vdso_vars+0x0/0xe6 returned 0 after 0 usecs [ 11.595018] calling sysenter_setup+0x0/0x2d2 @ 1 [ 11.600354] initcall sysenter_setup+0x0/0x2d2 returned 0 after 0 usecs [ 11.607721] calling param_sysfs_init+0x0/0x1ad @ 1 [ 11.613510] initcall param_sysfs_init+0x0/0x1ad returned 0 after 3906 usecs [ 11.621180] calling pm_sysrq_init+0x0/0x19 @ 1 [ 11.626319] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs [ 11.633492] calling default_bdi_init+0x0/0x9f @ 1 [ 11.639015] initcall default_bdi_init+0x0/0x9f returned 0 after 3906 usecs [ 11.646679] calling init_bio+0x0/0xf0 @ 1 [ 11.651395] bio: create slab at 0 [ 11.655900] initcall init_bio+0x0/0xf0 returned 0 after 7812 usecs [ 11.662871] calling fsnotify_notification_init+0x0/0x8a @ 1 [ 11.669270] initcall fsnotify_notification_init+0x0/0x8a returned 0 after 0 usecs [ 11.677704] calling cryptomgr_init+0x0/0x11 @ 1 [ 11.682942] initcall cryptomgr_init+0x0/0x11 returned 0 after 0 usecs [ 11.690211] calling blk_settings_init+0x0/0x25 @ 1 [ 11.695739] initcall blk_settings_init+0x0/0x25 returned 0 after 0 usecs [ 11.703301] calling blk_ioc_init+0x0/0x2a @ 1 [ 11.708343] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs [ 11.715421] calling blk_softirq_init+0x0/0x6c @ 1 [ 11.720851] initcall blk_softirq_init+0x0/0x6c returned 0 after 0 usecs [ 11.728314] calling blk_iopoll_setup+0x0/0x6c @ 1 [ 11.733745] initcall blk_iopoll_setup+0x0/0x6c returned 0 after 0 usecs [ 11.741209] calling genhd_device_init+0x0/0x71 @ 1 [ 11.746793] initcall genhd_device_init+0x0/0x71 returned 0 after 3906 usecs [ 11.754591] calling blk_dev_integrity_init+0x0/0x2a @ 1 [ 11.760603] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs [ 11.768648] calling gpiolib_debugfs_init+0x0/0x25 @ 1 [ 11.774469] initcall gpiolib_debugfs_init+0x0/0x25 returned 0 after 0 usecs [ 11.782322] calling pci_slot_init+0x0/0x47 @ 1 [ 11.787470] initcall pci_slot_init+0x0/0x47 returned 0 after 3906 usecs [ 11.794925] calling fbmem_init+0x0/0x99 @ 1 [ 11.799779] initcall fbmem_init+0x0/0x99 returned 0 after 0 usecs [ 11.806657] calling acpi_init+0x0/0xb1 @ 1 [ 11.815566] ACPI: EC: Look up EC in DSDT [ 11.819988] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110413/dsopcode-236) [ 11.830410] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88006a86f2f8), AE_AML_BUFFER_LIMIT (20110413/psparse-536) [ 11.881204] ACPI: Interpreter enabled [ 11.885193] ACPI: (supports S0 S1 S5) [ 11.889359] ACPI: Using IOAPIC for interrupt routing [ 11.902716] initcall acpi_init+0x0/0xb1 returned 0 after 54690 usecs [ 11.909707] calling dock_init+0x0/0xa4 @ 1 [ 11.914597] ACPI: No dock devices found. [ 11.918918] initcall dock_init+0x0/0xa4 returned 0 after 0 usecs [ 11.925705] calling acpi_pci_root_init+0x0/0x2d @ 1 [ 11.931328] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 11.942038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd]) [ 11.949487] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 11.956768] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 11.964235] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 11.972476] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff] [ 11.980716] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfedfffff] [ 11.988958] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfdffffff] [ 11.997202] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000c4000-0x000cbfff] conflicts with Video ROM [mem 0x000c0000-0x000c7fff] [ 12.013023] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600 [ 12.019787] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 12.026580] pci 0000:00:00.0: PME# disabled [ 12.031366] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 12.038113] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 12.044905] pci 0000:00:01.0: PME# disabled [ 12.049702] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 12.056440] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 12.063230] pci 0000:00:03.0: PME# disabled [ 12.068017] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604 [ 12.074764] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 12.081554] pci 0000:00:05.0: PME# disabled [ 12.086343] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 12.093088] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 12.099877] pci 0000:00:07.0: PME# disabled [ 12.104666] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604 [ 12.111414] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 12.118204] pci 0000:00:09.0: PME# disabled [ 12.122992] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800 [ 12.129769] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800 [ 12.136449] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800 [ 12.143149] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800 [ 12.149837] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 12.156420] pci 0000:00:13.0: reg 10: [mem 0xb1b24000-0xb1b24fff] [ 12.163378] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 12.170171] pci 0000:00:13.0: PME# disabled [ 12.174949] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 12.181739] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 12.188427] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 12.195111] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 12.201791] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800 [ 12.208492] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880 [ 12.215080] pci 0000:00:16.0: reg 10: [mem 0xb1b00000-0xb1b03fff 64bit] [ 12.222654] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880 [ 12.229236] pci 0000:00:16.1: reg 10: [mem 0xb1b04000-0xb1b07fff 64bit] [ 12.236812] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880 [ 12.243392] pci 0000:00:16.2: reg 10: [mem 0xb1b08000-0xb1b0bfff 64bit] [ 12.250965] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880 [ 12.257547] pci 0000:00:16.3: reg 10: [mem 0xb1b0c000-0xb1b0ffff 64bit] [ 12.265120] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880 [ 12.271703] pci 0000:00:16.4: reg 10: [mem 0xb1b10000-0xb1b13fff 64bit] [ 12.279276] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880 [ 12.285858] pci 0000:00:16.5: reg 10: [mem 0xb1b14000-0xb1b17fff 64bit] [ 12.293431] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880 [ 12.300015] pci 0000:00:16.6: reg 10: [mem 0xb1b18000-0xb1b1bfff 64bit] [ 12.307587] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880 [ 12.314169] pci 0000:00:16.7: reg 10: [mem 0xb1b1c000-0xb1b1ffff 64bit] [ 12.321746] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 12.328378] pci 0000:00:1a.0: reg 20: [io 0x30e0-0x30ff] [ 12.334519] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 12.341204] pci 0000:00:1a.1: reg 20: [io 0x30c0-0x30df] [ 12.347322] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 12.354002] pci 0000:00:1a.2: reg 20: [io 0x30a0-0x30bf] [ 12.360135] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 12.366757] pci 0000:00:1a.7: reg 10: [mem 0xb1b22000-0xb1b223ff] [ 12.373739] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 12.380499] pci 0000:00:1a.7: PME# disabled [ 12.385275] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 12.392043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 12.398820] pci 0000:00:1c.0: PME# disabled [ 12.403608] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604 [ 12.410367] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 12.417145] pci 0000:00:1c.4: PME# disabled [ 12.421935] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 12.428657] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 12.434778] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 12.441456] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 12.447569] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 12.454255] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 12.460387] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 12.467010] pci 0000:00:1d.7: reg 10: [mem 0xb1b21000-0xb1b213ff] [ 12.473991] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 12.480748] pci 0000:00:1d.7: PME# disabled [ 12.485534] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 12.492292] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 12.499005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f) [ 12.507409] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) [ 12.515942] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f) [ 12.524543] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 12.531195] pci 0000:00:1f.2: reg 10: [io 0x3108-0x310f] [ 12.537281] pci 0000:00:1f.2: reg 14: [io 0x3114-0x3117] [ 12.543389] pci 0000:00:1f.2: reg 18: [io 0x3100-0x3107] [ 12.549499] pci 0000:00:1f.2: reg 1c: [io 0x3110-0x3113] [ 12.555606] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f] [ 12.561715] pci 0000:00:1f.2: reg 24: [mem 0xb1b20000-0xb1b207ff] [ 12.568654] pci 0000:00:1f.2: PME# supported from D3hot [ 12.574506] pci 0000:00:1f.2: PME# disabled [ 12.579278] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 12.585966] pci 0000:00:1f.3: reg 10: [mem 0xb1b23000-0xb1b230ff 64bit] [ 12.593443] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 12.599664] pci 0000:01:00.0: [8086:10a7] type 0 class 0x000200 [ 12.606224] pci 0000:01:00.0: reg 10: [mem 0xb1a20000-0xb1a3ffff] [ 12.613115] pci 0000:01:00.0: reg 18: [io 0x2020-0x203f] [ 12.619211] pci 0000:01:00.0: reg 1c: [mem 0xb1a44000-0xb1a47fff] [ 12.626174] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 12.632968] pci 0000:01:00.0: PME# disabled [ 12.637768] pci 0000:01:00.1: [8086:10a7] type 0 class 0x000200 [ 12.644424] pci 0000:01:00.1: reg 10: [mem 0xb1a00000-0xb1a1ffff] [ 12.651318] pci 0000:01:00.1: reg 18: [io 0x2000-0x201f] [ 12.657410] pci 0000:01:00.1: reg 1c: [mem 0xb1a40000-0xb1a43fff] [ 12.664374] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 12.671168] pci 0000:01:00.1: PME# disabled [ 12.675964] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 12.681834] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 12.688717] pci 0000:00:01.0: bridge window [mem 0xb1a00000-0xb1afffff] [ 12.696380] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 12.705657] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 12.711502] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 12.719453] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 12.728181] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 12.737472] pci 0000:03:00.0: [1000:0060] type 0 class 0x000104 [ 12.744100] pci 0000:03:00.0: reg 10: [mem 0xb1900000-0xb193ffff 64bit] [ 12.751555] pci 0000:03:00.0: reg 18: [io 0x1000-0x10ff] [ 12.757670] pci 0000:03:00.0: reg 1c: [mem 0xb1940000-0xb197ffff 64bit] [ 12.765140] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 12.772540] pci 0000:03:00.0: supports D1 [ 12.777074] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 12.782959] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff] [ 12.789843] pci 0000:00:05.0: bridge window [mem 0xb1900000-0xb19fffff] [ 12.797506] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 12.806781] pci 0000:00:07.0: PCI bridge to [bus 04-04] [ 12.812629] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 12.820578] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 12.829307] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 12.838581] pci 0000:00:09.0: PCI bridge to [bus 05-05] [ 12.844430] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) [ 12.852378] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 12.861109] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 12.870385] pci 0000:00:1c.0: PCI bridge to [bus 06-06] [ 12.876232] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 12.884181] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 12.892909] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 12.902209] pci 0000:07:00.0: [102b:0522] type 0 class 0x000300 [ 12.908831] pci 0000:07:00.0: reg 10: [mem 0xb0000000-0xb0ffffff pref] [ 12.916191] pci 0000:07:00.0: reg 14: [mem 0xb1800000-0xb1803fff] [ 12.923075] pci 0000:07:00.0: reg 18: [mem 0xb1000000-0xb17fffff] [ 12.930016] pci 0000:07:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 12.937407] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 12.943227] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 12.951177] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff] [ 12.958840] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref] [ 12.967660] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 12.975513] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 12.983464] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 12.992193] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 13.001397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 13.010316] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 13.019236] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 13.028941] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfedfffff] (subtractive decode) [ 13.038628] pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfdffffff] (subtractive decode) [ 13.048381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.110954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT] [ 13.117989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP3._PRT] [ 13.125177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP5._PRT] [ 13.132351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT] [ 13.139528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP9._PRT] [ 13.146721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 13.153910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 13.161027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 13.168312] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 13.174715] pci0000:00: ACPI _OSC control (0x1d) granted (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:07.0 (XEN) PCI add device 00:09.0 (XEN) PCI add device 00:10.0 (XEN) PCI add device 00:10.1 (XEN) PCI add device 00:11.0 (XEN) PCI add device 00:11.1 (XEN) PCI add device 00:13.0 (XEN) PCI add device 00:14.0 (XEN) PCI add device 00:14.1 (XEN) PCI add device 00:14.2 (XEN) PCI add device 00:14.3 (XEN) PCI add device 00:15.0 (XEN) PCI add device 00:16.0 (XEN) PCI add device 00:16.1 (XEN) PCI add device 00:16.2 (XEN) PCI add device 00:16.3 (XEN) PCI add device 00:16.4 (XEN) PCI add device 00:16.5 (XEN) PCI add device 00:16.6 (XEN) PCI add device 00:16.7 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.2 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 01:00.0 (XEN) PCI add device 01:00.1 (XEN) PCI add device 03:00.0 (XEN) PCI add device 07:00.0 [ 13.310393] initcall acpi_pci_root_init+0x0/0x2d returned 0 after 332052 usecs [ 13.318486] calling acpi_pci_link_init+0x0/0x44 @ 1 [ 13.324180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 13.332324] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 13.340495] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 13.348637] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 13.356782] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.366187] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.375592] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.384995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.394358] initcall acpi_pci_link_init+0x0/0x44 returned 0 after 31251 usecs [ 13.402379] calling pnp_init+0x0/0x11 @ 1 [ 13.407041] initcall pnp_init+0x0/0x11 returned 0 after 0 usecs [ 13.413725] calling xen_setup_shutdown_event+0x0/0x22 @ 1 [ 13.419928] initcall xen_setup_shutdown_event+0x0/0x22 returned 0 after 0 usecs [ 13.428170] calling balloon_init+0x0/0x124 @ 1 [ 13.433307] xen/balloon: Initialising balloon driver. [ 13.439028] last_pfn = 0x6ca000 max_arch_pfn = 0x400000000 [ 13.508074] initcall balloon_init+0x0/0x124 returned 0 after 62503 usecs [ 13.515458] calling xenbus_probe_backend_init+0x0/0x23 @ 1 [ 13.521781] initcall xenbus_probe_backend_init+0x0/0x23 returned 0 after 0 usecs [ 13.530096] calling xenbus_probe_frontend_init+0x0/0x23 @ 1 [ 13.536520] initcall xenbus_probe_frontend_init+0x0/0x23 returned 0 after 3906 usecs [ 13.545219] calling balloon_init+0x0/0xff @ 1 [ 13.550260] xen-balloon: Initialising balloon driver. [ 13.555996] initcall balloon_init+0x0/0xff returned 0 after 0 usecs [ 13.563061] calling misc_init+0x0/0xad @ 1 [ 13.567825] initcall misc_init+0x0/0xad returned 0 after 0 usecs [ 13.574597] calling vga_arb_device_init+0x0/0xd2 @ 1 [ 13.580382] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none [ 13.589434] vgaarb: loaded [ 13.592533] vgaarb: bridge control possible 0000:07:00.0 [ 13.598546] initcall vga_arb_device_init+0x0/0xd2 returned 0 after 0 usecs [ 13.606303] calling serio_init+0x0/0x27 @ 1 [ 13.611158] initcall serio_init+0x0/0x27 returned 0 after 0 usecs [ 13.618033] calling input_init+0x0/0x102 @ 1 [ 13.622987] initcall input_init+0x0/0x102 returned 0 after 0 usecs [ 13.629959] calling rtc_init+0x0/0x71 @ 1 [ 13.634619] initcall rtc_init+0x0/0x71 returned 0 after 0 usecs [ 13.641303] calling power_supply_class_init+0x0/0x44 @ 1 [ 13.647416] initcall power_supply_class_init+0x0/0x44 returned 0 after 0 usecs [ 13.655555] calling hwmon_init+0x0/0xf0 @ 1 [ 13.660410] initcall hwmon_init+0x0/0xf0 returned 0 after 0 usecs [ 13.667287] calling leds_init+0x0/0x49 @ 1 [ 13.672044] initcall leds_init+0x0/0x49 returned 0 after 0 usecs [ 13.678825] calling pci_subsys_init+0x0/0x43 @ 1 [ 13.684157] PCI: Using ACPI for IRQ routing [ 13.701412] PCI: Discovered peer bus ff [ 13.705632] pci 0000:ff:00.0: [8086:2c70] type 0 class 0x000600 [ 13.712341] pci 0000:ff:00.1: [8086:2d81] type 0 class 0x000600 [ 13.719034] pci 0000:ff:02.0: [8086:2d90] type 0 class 0x000600 [ 13.725716] pci 0000:ff:02.1: [8086:2d91] type 0 class 0x000600 [ 13.732406] pci 0000:ff:02.2: [8086:2d92] type 0 class 0x000600 [ 13.739095] pci 0000:ff:02.3: [8086:2d93] type 0 class 0x000600 [ 13.745786] pci 0000:ff:02.4: [8086:2d94] type 0 class 0x000600 [ 13.752477] pci 0000:ff:02.5: [8086:2d95] type 0 class 0x000600 [ 13.759168] pci 0000:ff:03.0: [8086:2d98] type 0 class 0x000600 [ 13.765856] pci 0000:ff:03.1: [8086:2d99] type 0 class 0x000600 [ 13.772545] pci 0000:ff:03.2: [8086:2d9a] type 0 class 0x000600 [ 13.779238] pci 0000:ff:03.4: [8086:2d9c] type 0 class 0x000600 [ 13.785930] pci 0000:ff:04.0: [8086:2da0] type 0 class 0x000600 [ 13.792617] pci 0000:ff:04.1: [8086:2da1] type 0 class 0x000600 [ 13.799306] pci 0000:ff:04.2: [8086:2da2] type 0 class 0x000600 [ 13.805996] pci 0000:ff:04.3: [8086:2da3] type 0 class 0x000600 [ 13.812691] pci 0000:ff:05.0: [8086:2da8] type 0 class 0x000600 [ 13.819377] pci 0000:ff:05.1: [8086:2da9] type 0 class 0x000600 [ 13.826066] pci 0000:ff:05.2: [8086:2daa] type 0 class 0x000600 [ 13.832754] pci 0000:ff:05.3: [8086:2dab] type 0 class 0x000600 [ 13.839452] pci 0000:ff:06.0: [8086:2db0] type 0 class 0x000600 [ 13.846138] pci 0000:ff:06.1: [8086:2db1] type 0 class 0x000600 [ 13.852825] pci 0000:ff:06.2: [8086:2db2] type 0 class 0x000600 [ 13.859513] pci 0000:ff:06.3: [8086:2db3] type 0 class 0x000600 (XEN) PCI add device ff:00.0 (XEN) PCI add device ff:00.1 (XEN) PCI add device ff:02.0 (XEN) PCI add device ff:02.1 (XEN) PCI add device ff:02.2 (XEN) PCI add device ff:02.3 (XEN) PCI add device ff:02.4 (XEN) PCI add device ff:02.5 (XEN) PCI add device ff:03.0 (XEN) PCI add device ff:03.1 (XEN) PCI add device ff:03.2 (XEN) PCI add device ff:03.4 (XEN) PCI add device ff:04.0 (XEN) PCI add device ff:04.1 (XEN) PCI add device ff:04.2 (XEN) PCI add device ff:04.3 (XEN) PCI add device ff:05.0 (XEN) PCI add device ff:05.1 (XEN) PCI add device ff:05.2 (XEN) PCI add device ff:05.3 (XEN) PCI add device ff:06.0 (XEN) PCI add device ff:06.1 (XEN) PCI add device ff:06.2 (XEN) PCI add device ff:06.3 [ 13.935969] PCI: pci_cache_line_size set to 64 bytes [ 13.941853] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 13.949522] reserve RAM buffer: 0000000000099000 - 000000000009ffff [ 13.956405] reserve RAM buffer: 000000008c3a0000 - 000000008fffffff [ 13.963582] reserve RAM buffer: 00000006ca000000 - 00000006cbffffff [ 13.970760] initcall pci_subsys_init+0x0/0x43 returned 0 after 144540 usecs [ 13.978903] calling proto_init+0x0/0x12 @ 1 [ 13.983751] initcall proto_init+0x0/0x12 returned 0 after 0 usecs [ 13.990632] calling net_dev_init+0x0/0x1c0 @ 1 [ 13.995860] initcall net_dev_init+0x0/0x1c0 returned 0 after 3906 usecs [ 14.003236] calling neigh_init+0x0/0x71 @ 1 [ 14.008084] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs [ 14.014967] calling fib_rules_init+0x0/0x9c @ 1 [ 14.020204] initcall fib_rules_init+0x0/0x9c returned 0 after 0 usecs [ 14.027475] calling pktsched_init+0x0/0xe2 @ 1 [ 14.032616] initcall pktsched_init+0x0/0xe2 returned 0 after 0 usecs [ 14.039789] calling tc_filter_init+0x0/0x4c @ 1 [ 14.045023] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 14.052294] calling tc_action_init+0x0/0x4d @ 1 [ 14.057532] initcall tc_action_init+0x0/0x4d returned 0 after 0 usecs [ 14.064804] calling genl_init+0x0/0x84 @ 1 [ 14.069568] initcall genl_init+0x0/0x84 returned 0 after 3906 usecs [ 14.076631] calling wireless_nlevent_init+0x0/0x12 @ 1 [ 14.082546] initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs [ 14.090495] calling sysctl_init+0x0/0x49 @ 1 [ 14.095441] initcall sysctl_init+0x0/0x49 returned 0 after 0 usecs [ 14.102422] calling print_ICs+0x0/0x51d @ 1 [ 14.107269] initcall print_ICs+0x0/0x51d returned 0 after 0 usecs [ 14.114153] calling hpet_late_init+0x0/0xf6 @ 1 [ 14.119390] initcall hpet_late_init+0x0/0xf6 returned -19 after 0 usecs [ 14.126855] calling init_amd_nbs+0x0/0xb3 @ 1 [ 14.131917] initcall init_amd_nbs+0x0/0xb3 returned 0 after 0 usecs [ 14.138974] calling clocksource_done_booting+0x0/0x5b @ 1 [ 14.145179] Switching to clocksource xen [ 14.149683] initcall clocksource_done_booting+0x0/0x5b returned 0 after 3911 usecs [ 14.158172] calling rb_init_debugfs+0x0/0x2f @ 1 [ 14.163510] initcall rb_init_debugfs+0x0/0x2f returned 0 after 5 usecs [ 14.165477] Switched to NOHz mode on CPU #4 [ 14.165669] Switched to NOHz mode on CPU #10 [ 14.166141] Switched to NOHz mode on CPU #5 [ 14.166227] Switched to NOHz mode on CPU #11 [ 14.167517] Switched to NOHz mode on CPU #6 [ 14.167564] Switched to NOHz mode on CPU #7 [ 14.167642] Switched to NOHz mode on CPU #1 [ 14.168120] Switched to NOHz mode on CPU #8 [ 14.168201] Switched to NOHz mode on CPU #2 [ 14.168851] Switched to NOHz mode on CPU #9 [ 14.168854] Switched to NOHz mode on CPU #3 [ 14.223325] calling tracer_init_debugfs+0x0/0x352 @ 1 [ 14.229172] Switched to NOHz mode on CPU #0 [ 14.233983] initcall tracer_init_debugfs+0x0/0x352 returned 0 after 4727 usecs [ 14.242038] calling init_trace_printk_function_export+0x0/0x2f @ 1 [ 14.249120] initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 1 usecs [ 14.258228] calling event_trace_init+0x0/0x2b8 @ 1 [ 14.264620] initcall event_trace_init+0x0/0x2b8 returned 0 after 842 usecs [ 14.272193] calling init_kprobe_trace+0x0/0x6e @ 1 [ 14.277722] initcall init_kprobe_trace+0x0/0x6e returned 0 after 2 usecs [ 14.285282] calling init_pipe_fs+0x0/0x42 @ 1 [ 14.290335] initcall init_pipe_fs+0x0/0x42 returned 0 after 12 usecs [ 14.297497] calling eventpoll_init+0x0/0xda @ 1 [ 14.302739] initcall eventpoll_init+0x0/0xda returned 0 after 3 usecs [ 14.310004] calling anon_inode_init+0x0/0x121 @ 1 [ 14.315441] initcall anon_inode_init+0x0/0x121 returned 0 after 6 usecs [ 14.322900] calling tomoyo_initerface_init+0x0/0x171 @ 1 [ 14.329008] initcall tomoyo_initerface_init+0x0/0x171 returned 0 after 0 usecs [ 14.337180] calling blk_scsi_ioctl_init+0x0/0x284 @ 1 [ 14.342998] initcall blk_scsi_ioctl_init+0x0/0x284 returned 0 after 0 usecs [ 14.350850] calling acpi_event_init+0x0/0x52 @ 1 [ 14.356198] initcall acpi_event_init+0x0/0x52 returned 0 after 13 usecs [ 14.363648] calling pnp_system_init+0x0/0x11 @ 1 [ 14.368990] initcall pnp_system_init+0x0/0x11 returned 0 after 8 usecs [ 14.376349] calling pnpacpi_init+0x0/0x8c @ 1 [ 14.381390] pnp: PnP ACPI init [ 14.384887] ACPI: bus type pnp registered [ 14.389840] pnp 00:00: [bus 00-fd] [ 14.393534] pnp 00:00: [io 0x0cf8-0x0cff] [ 14.398189] pnp 00:00: [io 0x0000-0x0cf7 window] [ 14.403519] pnp 00:00: [io 0x0d00-0xffff window] [ 14.408854] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 14.414960] pnp 00:00: [mem 0x000c4000-0x000cbfff window] [ 14.421068] pnp 00:00: [mem 0xfed40000-0xfedfffff window] [ 14.427177] pnp 00:00: [mem 0xb0000000-0xfdffffff window] [ 14.433285] pnp 00:00: [mem 0x00000000 window] [ 14.438390] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 14.446478] pnp 00:01: [mem 0xfec00000-0xfecfffff] [ 14.451919] pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active) [ 14.459484] pnp 00:02: [io 0x0000-0x000f] [ 14.463954] pnp 00:02: [io 0x0081-0x0083] [ 14.468606] pnp 00:02: [io 0x0087] [ 14.472583] pnp 00:02: [io 0x0089-0x008b] [ 14.477235] pnp 00:02: [io 0x008f] [ 14.481210] pnp 00:02: [io 0x00c0-0x00df] [ 14.485865] pnp 00:02: [dma 4] [ 14.489389] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 14.496731] pnp 00:03: [io 0x0070-0x0071] [ 14.501378] pnp 00:03: [io 0x0074-0x0077] [ 14.506032] xen: registering gsi 8 triggering 1 polarity 0 [ 14.512237] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 14.518150] xen: --> pirq=8 -> irq=8 (gsi=8) (XEN) IOAPIC[0]: Set PCI routing entry (8-8 -> 0x50 -> IRQ 8 Mode:0 Active:0) [ 14.530669] pnp 00:03: [irq 8] [ 14.534193] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 14.541536] pnp 00:04: [io 0x00f0] [ 14.545493] xen: registering gsi 13 triggering 1 polarity 0 [ 14.551797] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 14.557903] xen: --> pirq=13 -> irq=13 (gsi=13) (XEN) IOAPIC[0]: Set PCI routing entry (8-13 -> 0x78 -> IRQ 13 Mode:0 Active:0) [ 14.570903] pnp 00:04: [irq 13] [ 14.574517] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 14.581860] pnp 00:05: [io 0x0061] [ 14.585859] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 14.593240] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 14.598658] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 14.606002] pnp 00:07: [io 0x0500-0x057f] [ 14.610647] pnp 00:07: [io 0x0400-0x047f] [ 14.615300] pnp 00:07: [io 0x0092] [ 14.619276] pnp 00:07: [io 0x0010-0x001f] [ 14.623929] pnp 00:07: [io 0x0072-0x0073] [ 14.628586] pnp 00:07: [io 0x0080] [ 14.632559] pnp 00:07: [io 0x0084-0x0086] [ 14.637212] pnp 00:07: [io 0x0088] [ 14.641187] pnp 00:07: [io 0x008c-0x008e] [ 14.645842] pnp 00:07: [io 0x0090-0x009f] [ 14.650495] pnp 00:07: [io 0x0800-0x081f] [ 14.655149] pnp 00:07: [io 0x0ca2-0x0ca3] [ 14.659805] pnp 00:07: [io 0x0600-0x061f] [ 14.664457] pnp 00:07: [io 0x0880-0x0883] [ 14.669111] pnp 00:07: [io 0x0ca4-0x0ca5] [ 14.673766] pnp 00:07: [mem 0xfed1c000-0xfed3fffe] [ 14.679194] pnp 00:07: [mem 0xff000000-0xffffffff] [ 14.684625] pnp 00:07: [mem 0xfee00000-0xfeefffff] [ 14.690054] pnp 00:07: [mem 0xfe900000-0xfe90001f] [ 14.695483] pnp 00:07: [mem 0xfea00000-0xfea0001f] [ 14.700913] pnp 00:07: [mem 0xfed1b000-0xfed1bfff] [ 14.706471] system 00:07: [io 0x0500-0x057f] has been reserved [ 14.713033] system 00:07: [io 0x0400-0x047f] has been reserved [ 14.719722] system 00:07: [io 0x0800-0x081f] has been reserved [ 14.726412] system 00:07: [io 0x0ca2-0x0ca3] has been reserved [ 14.733104] system 00:07: [io 0x0600-0x061f] has been reserved [ 14.739792] system 00:07: [io 0x0880-0x0883] has been reserved [ 14.746482] system 00:07: [io 0x0ca4-0x0ca5] has been reserved [ 14.753173] system 00:07: [mem 0xfed1c000-0xfed3fffe] has been reserved [ 14.760638] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved [ 14.768492] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 14.776346] system 00:07: [mem 0xfe900000-0xfe90001f] has been reserved [ 14.783810] system 00:07: [mem 0xfea00000-0xfea0001f] has been reserved [ 14.791277] system 00:07: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 14.798742] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 14.806593] pnp 00:08: [io 0x03f8-0x03ff] [ 14.811071] xen: registering gsi 4 triggering 1 polarity 0 [ 14.817274] xen_map_pirq_gsi: returning irq 4 for gsi 4 [ 14.823188] xen: --> pirq=4 -> irq=4 (gsi=4) [ 14.828043] Already setup the GSI :4 [ 14.832109] pnp 00:08: [irq 4] [ 14.835675] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 14.843147] pnp 00:09: [io 0x02f8-0x02ff] [ 14.847622] xen: registering gsi 3 triggering 1 polarity 0 [ 14.853826] xen_map_pirq_gsi: returning irq 3 for gsi 3 [ 14.859740] xen: --> pirq=3 -> irq=3 (gsi=3) (XEN) IOAPIC[0]: Set PCI routing entry (8-3 -> 0x30 -> IRQ 3 Mode:0 Active:0) [ 14.872257] pnp 00:09: [irq 3] [ 14.875848] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 14.883172] pnp 00:0a: [io 0x0ca2] [ 14.887085] pnp 00:0a: [io 0x0ca3] [ 14.891096] pnp 00:0a: Plug and Play ACPI device, IDs IPI0001 (active) [ 14.898469] pnp: PnP ACPI: found 11 devices [ 14.903177] ACPI: ACPI bus type pnp unregistered [ 14.908415] initcall pnpacpi_init+0x0/0x8c returned 0 after 514671 usecs [ 14.915978] calling chr_dev_init+0x0/0xc6 @ 1 [ 14.922163] initcall chr_dev_init+0x0/0xc6 returned 0 after 1116 usecs [ 14.929347] calling firmware_class_init+0x0/0x18 @ 1 [ 14.935075] initcall firmware_class_init+0x0/0x18 returned 0 after 6 usecs [ 14.942824] calling cpufreq_gov_performance_init+0x0/0x11 @ 1 [ 14.949418] initcall cpufreq_gov_performance_init+0x0/0x11 returned 0 after 0 usecs [ 14.958047] calling cpufreq_gov_dbs_init+0x0/0x5e @ 1 [ 14.963865] initcall cpufreq_gov_dbs_init+0x0/0x5e returned 0 after 0 usecs [ 14.971717] calling init_acpi_pm_clocksource+0x0/0xef @ 1 [ 14.982154] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 14.989435] initcall init_acpi_pm_clocksource+0x0/0xef returned -19 after 11242 usecs [ 14.998257] calling pcibios_assign_resources+0x0/0x6a @ 1 [ 15.004476] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 15.014158] pci 0000:07:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 15.023862] PCI: max bus depth: 1 pci_try_num: 2 [ 15.029196] pci 0000:00:05.0: BAR 15: assigned [mem 0xb1c00000-0xb1cfffff pref] [ 15.037332] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 15.044315] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb1d00000-0xb1efffff] [ 15.052070] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb1f00000-0xb20fffff 64bit pref] [ 15.060891] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] [ 15.067871] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 15.073786] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 15.080674] pci 0000:00:01.0: bridge window [mem 0xb1a00000-0xb1afffff] [ 15.088334] pci 0000:00:01.0: bridge window [mem pref disabled] [ 15.095219] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 15.101128] pci 0000:00:03.0: bridge window [io disabled] [ 15.107530] pci 0000:00:03.0: bridge window [mem disabled] [ 15.113927] pci 0000:00:03.0: bridge window [mem pref disabled] [ 15.120818] pci 0000:03:00.0: BAR 6: assigned [mem 0xb1c00000-0xb1c1ffff pref] [ 15.128953] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 15.134868] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff] [ 15.141755] pci 0000:00:05.0: bridge window [mem 0xb1900000-0xb19fffff] [ 15.149413] pci 0000:00:05.0: bridge window [mem 0xb1c00000-0xb1cfffff pref] [ 15.157561] pci 0000:00:07.0: PCI bridge to [bus 04-04] [ 15.163469] pci 0000:00:07.0: bridge window [io disabled] [ 15.169873] pci 0000:00:07.0: bridge window [mem disabled] [ 15.176270] pci 0000:00:07.0: bridge window [mem pref disabled] [ 15.183158] pci 0000:00:09.0: PCI bridge to [bus 05-05] [ 15.189066] pci 0000:00:09.0: bridge window [io disabled] [ 15.195470] pci 0000:00:09.0: bridge window [mem disabled] [ 15.201866] pci 0000:00:09.0: bridge window [mem pref disabled] [ 15.208753] pci 0000:00:1c.0: PCI bridge to [bus 06-06] [ 15.214663] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 15.221551] pci 0000:00:1c.0: bridge window [mem 0xb1d00000-0xb1efffff] [ 15.229208] pci 0000:00:1c.0: bridge window [mem 0xb1f00000-0xb20fffff 64bit pref] [ 15.237939] pci 0000:07:00.0: BAR 6: assigned [mem 0xb1810000-0xb181ffff pref] [ 15.246076] pci 0000:00:1c.4: PCI bridge to [bus 07-07] [ 15.251992] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 15.258878] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff] [ 15.266537] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref] [ 15.275265] pci 0000:00:1e.0: PCI bridge to [bus 08-08] [ 15.281173] pci 0000:00:1e.0: bridge window [io disabled] [ 15.287578] pci 0000:00:1e.0: bridge window [mem disabled] [ 15.293975] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 15.300870] xen: registering gsi 28 triggering 0 polarity 1 [ 15.307177] xen: --> pirq=28 -> irq=28 (gsi=28) (XEN) IOAPIC[1]: Set PCI routing entry (9-4 -> 0x98 -> IRQ 28 Mode:1 Active:1) [ 15.320063] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 15.327620] pci 0000:00:01.0: setting latency timer to 64 [ 15.333730] xen: registering gsi 24 triggering 0 polarity 1 [ 15.340062] xen: --> pirq=24 -> irq=24 (gsi=24) (XEN) IOAPIC[1]: Set PCI routing entry (9-0 -> 0xa0 -> IRQ 24 Mode:1 Active:1) [ 15.352957] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 15.360513] pci 0000:00:03.0: setting latency timer to 64 [ 15.366624] xen: registering gsi 26 triggering 0 polarity 1 [ 15.372929] xen: --> pirq=26 -> irq=26 (gsi=26) (XEN) IOAPIC[1]: Set PCI routing entry (9-2 -> 0xa8 -> IRQ 26 Mode:1 Active:1) [ 15.385825] pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 [ 15.393383] pci 0000:00:05.0: setting latency timer to 64 [ 15.399492] xen: registering gsi 30 triggering 0 polarity 1 [ 15.405801] xen: --> pirq=30 -> irq=30 (gsi=30) (XEN) IOAPIC[1]: Set PCI routing entry (9-6 -> 0xb0 -> IRQ 30 Mode:1 Active:1) [ 15.418692] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 15.426250] pci 0000:00:07.0: setting latency timer to 64 [ 15.432361] xen: registering gsi 32 triggering 0 polarity 1 [ 15.438667] xen: --> pirq=32 -> irq=32 (gsi=32) (XEN) IOAPIC[1]: Set PCI routing entry (9-8 -> 0xb8 -> IRQ 32 Mode:1 Active:1) [ 15.451561] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 15.459118] pci 0000:00:09.0: setting latency timer to 64 [ 15.465229] xen: registering gsi 16 triggering 0 polarity 1 [ 15.471534] xen: --> pirq=16 -> irq=16 (gsi=16) (XEN) IOAPIC[0]: Set PCI routing entry (8-16 -> 0xc0 -> IRQ 16 Mode:1 Active:1) [ 15.484525] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.492083] pci 0000:00:1c.0: setting latency timer to 64 [ 15.498193] xen: registering gsi 16 triggering 0 polarity 1 [ 15.504490] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 15.510597] xen: --> pirq=16 -> irq=16 (gsi=16) [ 15.515742] Already setup the GSI :16 [ 15.519906] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.527473] pci 0000:00:1c.4: setting latency timer to 64 [ 15.533585] pci 0000:00:1e.0: setting latency timer to 64 [ 15.539687] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 15.545988] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 15.552289] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 15.559369] pci_bus 0000:00: resource 7 [mem 0xfed40000-0xfedfffff] [ 15.566444] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xfdffffff] [ 15.573523] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 15.579826] pci_bus 0000:01: resource 1 [mem 0xb1a00000-0xb1afffff] [ 15.586902] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 15.593203] pci_bus 0000:03: resource 1 [mem 0xb1900000-0xb19fffff] [ 15.600282] pci_bus 0000:03: resource 2 [mem 0xb1c00000-0xb1cfffff pref] [ 15.607847] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 15.614147] pci_bus 0000:06: resource 1 [mem 0xb1d00000-0xb1efffff] [ 15.621227] pci_bus 0000:06: resource 2 [mem 0xb1f00000-0xb20fffff 64bit pref] [ 15.629368] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] [ 15.635670] pci_bus 0000:07: resource 1 [mem 0xb1000000-0xb18fffff] [ 15.642751] pci_bus 0000:07: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref] [ 15.650893] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 15.657195] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 15.663497] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 15.670574] pci_bus 0000:08: resource 7 [mem 0xfed40000-0xfedfffff] [ 15.677652] pci_bus 0000:08: resource 8 [mem 0xb0000000-0xfdffffff] [ 15.684730] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff] [ 15.691033] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff] [ 15.698306] initcall pcibios_assign_resources+0x0/0x6a returned 0 after 677579 usecs [ 15.707032] calling sysctl_core_init+0x0/0x37 @ 1 [ 15.712469] initcall sysctl_core_init+0x0/0x37 returned 0 after 8 usecs [ 15.719926] calling inet_init+0x0/0x27b @ 1 [ 15.724791] NET: Registered protocol family 2 [ 15.731136] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 15.742518] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 15.752417] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 15.759964] TCP: Hash tables configured (established 524288 bind 65536) [ 15.767261] TCP reno registered [ 15.771007] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 15.778087] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 15.785570] initcall inet_init+0x0/0x27b returned 0 after 59364 usecs [ 15.792661] calling af_unix_init+0x0/0x4b @ 1 [ 15.797700] NET: Registered protocol family 1 [ 15.802648] initcall af_unix_init+0x0/0x4b returned 0 after 4832 usecs [ 15.810014] calling pci_apply_final_quirks+0x0/0xf4 @ 1 [ 15.816530] pci 0000:01:00.0: Disabling L0s [ 15.821101] pci 0000:01:00.1: Disabling L0s [ 15.825859] pci 0000:07:00.0: Boot video device [ 15.831041] PCI: CLS 64 bytes, default 64 [ 15.835544] initcall pci_apply_final_quirks+0x0/0xf4 returned 0 after 19060 usecs [ 15.843980] calling populate_rootfs+0x0/0xfd @ 1 [ 15.849344] Unpacking initramfs... [ 16.128709] Freeing initrd memory: 360692k freed [ 16.196103] initcall populate_rootfs+0x0/0xfd returned 0 after 338656 usecs [ 16.203776] calling pci_iommu_init+0x0/0x37 @ 1 [ 16.209009] initcall pci_iommu_init+0x0/0x37 returned 0 after 0 usecs [ 16.216283] calling calgary_fixup_tce_spaces+0x0/0xf7 @ 1 [ 16.222486] initcall calgary_fixup_tce_spaces+0x0/0xf7 returned -19 after 0 usecs [ 16.230921] calling i8259A_init_ops+0x0/0x21 @ 1 [ 16.236320] initcall i8259A_init_ops+0x0/0x21 returned 0 after 62 usecs [ 16.243721] calling vsyscall_init+0x0/0x6c @ 1 [ 16.248911] initcall vsyscall_init+0x0/0x6c returned 0 after 49 usecs [ 16.256130] calling sbf_init+0x0/0xe7 @ 1 [ 16.260784] initcall sbf_init+0x0/0xe7 returned 0 after 0 usecs [ 16.267474] calling init_tsc_clocksource+0x0/0x5f @ 1 [ 16.273299] initcall init_tsc_clocksource+0x0/0x5f returned 0 after 4 usecs [ 16.281144] calling add_rtc_cmos+0x0/0x95 @ 1 [ 16.286189] initcall add_rtc_cmos+0x0/0x95 returned 0 after 2 usecs [ 16.293265] calling i8237A_init_ops+0x0/0x14 @ 1 [ 16.298616] initcall i8237A_init_ops+0x0/0x14 returned 0 after 17 usecs [ 16.306065] calling cache_sysfs_init+0x0/0x5f @ 1 [ 16.311980] initcall cache_sysfs_init+0x0/0x5f returned 0 after 476 usecs [ 16.319457] calling mcheck_init_device+0x0/0x112 @ 1 [ 16.325177] initcall mcheck_init_device+0x0/0x112 returned -5 after 0 usecs [ 16.333030] initcall mcheck_init_device+0x0/0x112 returned with error code -5 [ 16.341201] calling threshold_init_device+0x0/0x80 @ 1 [ 16.347116] initcall threshold_init_device+0x0/0x80 returned 0 after 1 usecs [ 16.355066] calling thermal_throttle_init_device+0x0/0x8c @ 1 [ 16.361658] initcall thermal_throttle_init_device+0x0/0x8c returned 0 after 0 usecs [ 16.370290] calling ioapic_init_ops+0x0/0x14 @ 1 [ 16.375619] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs [ 16.382988] calling add_pcspkr+0x0/0x39 @ 1 [ 16.387888] initcall add_pcspkr+0x0/0x39 returned 0 after 49 usecs [ 16.394818] calling audit_classes_init+0x0/0xaf @ 1 [ 16.400443] initcall audit_classes_init+0x0/0xaf returned 0 after 2 usecs [ 16.408100] calling ia32_binfmt_init+0x0/0x14 @ 1 [ 16.413533] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs [ 16.420997] calling init_aout_binfmt+0x0/0x13 @ 1 [ 16.426425] initcall init_aout_binfmt+0x0/0x13 returned 0 after 0 usecs [ 16.433890] calling init_sched_debug_procfs+0x0/0x2c @ 1 [ 16.440003] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 4 usecs [ 16.448142] calling proc_execdomains_init+0x0/0x22 @ 1 [ 16.454059] initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs [ 16.462006] calling ioresources_init+0x0/0x3c @ 1 [ 16.467438] initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs [ 16.474902] calling uid_cache_init+0x0/0x8e @ 1 [ 16.480154] initcall uid_cache_init+0x0/0x8e returned 0 after 15 usecs [ 16.487507] calling init_posix_timers+0x0/0x1cd @ 1 [ 16.493143] initcall init_posix_timers+0x0/0x1cd returned 0 after 12 usecs [ 16.500889] calling init_posix_cpu_timers+0x0/0xc8 @ 1 [ 16.506801] initcall init_posix_cpu_timers+0x0/0xc8 returned 0 after 0 usecs [ 16.514751] calling nsproxy_cache_init+0x0/0x2d @ 1 [ 16.520375] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 usecs [ 16.528035] calling create_proc_profile+0x0/0x257 @ 1 [ 16.533851] initcall create_proc_profile+0x0/0x257 returned 0 after 0 usecs [ 16.541704] calling timekeeping_init_ops+0x0/0x14 @ 1 [ 16.547523] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs [ 16.555376] calling init_clocksource_sysfs+0x0/0x52 @ 1 [ 16.561432] initcall init_clocksource_sysfs+0x0/0x52 returned 0 after 42 usecs [ 16.569532] calling init_timer_list_procfs+0x0/0x2d @ 1 [ 16.575545] initcall init_timer_list_procfs+0x0/0x2d returned 0 after 2 usecs [ 16.583589] calling alarmtimer_init+0x0/0x14b @ 1 [ 16.589058] initcall alarmtimer_init+0x0/0x14b returned 0 after 36 usecs [ 16.596582] calling init_tstats_procfs+0x0/0x2c @ 1 [ 16.602206] initcall init_tstats_procfs+0x0/0x2c returned 0 after 1 usecs [ 16.609865] calling futex_init+0x0/0x5f @ 1 [ 16.614723] initcall futex_init+0x0/0x5f returned 0 after 9 usecs [ 16.621597] calling proc_dma_init+0x0/0x22 @ 1 [ 16.626738] initcall proc_dma_init+0x0/0x22 returned 0 after 1 usecs [ 16.633910] calling proc_modules_init+0x0/0x23 @ 1 [ 16.639437] initcall proc_modules_init+0x0/0x23 returned 0 after 1 usecs [ 16.646998] calling kallsyms_init+0x0/0x25 @ 1 [ 16.652138] initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs [ 16.659314] calling snapshot_device_init+0x0/0x11 @ 1 [ 16.665165] initcall snapshot_device_init+0x0/0x11 returned 0 after 33 usecs [ 16.673080] calling crash_save_vmcoreinfo_init+0x0/0x46d @ 1 [ 16.679596] initcall crash_save_vmcoreinfo_init+0x0/0x46d returned 0 after 19 usecs [ 16.688205] calling crash_notes_memory_init+0x0/0x37 @ 1 [ 16.694319] initcall crash_notes_memory_init+0x0/0x37 returned 0 after 5 usecs [ 16.702457] calling user_namespaces_init+0x0/0x2d @ 1 [ 16.708281] initcall user_namespaces_init+0x0/0x2d returned 0 after 6 usecs [ 16.716128] calling pid_namespaces_init+0x0/0x2d @ 1 [ 16.721853] initcall pid_namespaces_init+0x0/0x2d returned 0 after 4 usecs [ 16.729606] calling audit_init+0x0/0x133 @ 1 [ 16.734549] audit: initializing netlink socket (disabled) [ 16.740674] type=2000 audit(1312228304.871:1): initialized [ 16.746864] initcall audit_init+0x0/0x133 returned 0 after 12025 usecs [ 16.754232] calling audit_watch_init+0x0/0x3a @ 1 [ 16.759663] initcall audit_watch_init+0x0/0x3a returned 0 after 0 usecs [ 16.767127] calling audit_tree_init+0x0/0x49 @ 1 [ 16.772460] initcall audit_tree_init+0x0/0x49 returned 0 after 0 usecs [ 16.779828] calling init_kprobes+0x0/0x186 @ 1 [ 16.796231] initcall init_kprobes+0x0/0x186 returned 0 after 10998 usecs [ 16.803609] calling hung_task_init+0x0/0x4c @ 1 [ 16.808895] initcall hung_task_init+0x0/0x4c returned 0 after 49 usecs [ 16.816214] calling utsname_sysctl_init+0x0/0x14 @ 1 [ 16.821940] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 7 usecs [ 16.829692] calling init_tracepoints+0x0/0x11 @ 1 [ 16.835119] initcall init_tracepoints+0x0/0x11 returned 0 after 0 usecs [ 16.842585] calling init_events+0x0/0x5e @ 1 [ 16.847531] initcall init_events+0x0/0x5e returned 0 after 1 usecs [ 16.854511] calling init_blk_tracer+0x0/0x56 @ 1 [ 16.859843] initcall init_blk_tracer+0x0/0x56 returned 0 after 1 usecs [ 16.867211] calling perf_event_sysfs_init+0x0/0x8f @ 1 [ 16.873177] initcall perf_event_sysfs_init+0x0/0x8f returned 0 after 49 usecs [ 16.881173] calling init_per_zone_wmark_min+0x0/0x7e @ 1 [ 16.890307] initcall init_per_zone_wmark_min+0x0/0x7e returned 0 after 2948 usecs [ 16.898564] calling kswapd_init+0x0/0x6c @ 1 [ 16.903602] initcall kswapd_init+0x0/0x6c returned 0 after 93 usecs [ 16.910583] calling setup_vmstat+0x0/0xbb @ 1 [ 16.915656] initcall setup_vmstat+0x0/0xbb returned 0 after 29 usecs [ 16.922799] calling mm_sysfs_init+0x0/0x29 @ 1 [ 16.927944] initcall mm_sysfs_init+0x0/0x29 returned 0 after 5 usecs [ 16.935114] calling proc_vmalloc_init+0x0/0x25 @ 1 [ 16.940640] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs [ 16.948202] calling procswaps_init+0x0/0x22 @ 1 [ 16.953439] initcall procswaps_init+0x0/0x22 returned 0 after 1 usecs [ 16.960709] calling hugetlb_init+0x0/0x41e @ 1 [ 16.965849] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 16.973042] initcall hugetlb_init+0x0/0x41e returned 0 after 7025 usecs [ 16.980488] calling ksm_init+0x0/0x168 @ 1 [ 16.985296] initcall ksm_init+0x0/0x168 returned 0 after 53 usecs [ 16.992123] calling slab_proc_init+0x0/0x26 @ 1 [ 16.997360] initcall slab_proc_init+0x0/0x26 returned 0 after 1 usecs [ 17.004631] calling slab_sysfs_init+0x0/0xf8 @ 1 [ 17.011259] initcall slab_sysfs_init+0x0/0xf8 returned 0 after 1265 usecs [ 17.018734] calling fcntl_init+0x0/0x2a @ 1 [ 17.023586] initcall fcntl_init+0x0/0x2a returned 0 after 4 usecs [ 17.030467] calling proc_filesystems_init+0x0/0x22 @ 1 [ 17.036382] initcall proc_filesystems_init+0x0/0x22 returned 0 after 1 usecs [ 17.044330] calling fsnotify_mark_init+0x0/0x40 @ 1 [ 17.050003] initcall fsnotify_mark_init+0x0/0x40 returned 0 after 46 usecs [ 17.057711] calling dnotify_init+0x0/0x7b @ 1 [ 17.062797] initcall dnotify_init+0x0/0x7b returned 0 after 44 usecs [ 17.069926] calling inotify_user_setup+0x0/0x70 @ 1 [ 17.075557] initcall inotify_user_setup+0x0/0x70 returned 0 after 6 usecs [ 17.083211] calling aio_setup+0x0/0x7a @ 1 [ 17.087972] initcall aio_setup+0x0/0x7a returned 0 after 10 usecs [ 17.094845] calling proc_locks_init+0x0/0x23 @ 1 [ 17.100179] initcall proc_locks_init+0x0/0x23 returned 0 after 1 usecs [ 17.107545] calling init_sys32_ioctl+0x0/0x28 @ 1 [ 17.113037] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 60 usecs [ 17.120538] calling dquot_init+0x0/0x111 @ 1 [ 17.125482] VFS: Disk quotas dquot_6.5.2 [ 17.130002] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.137217] initcall dquot_init+0x0/0x111 returned 0 after 11458 usecs [ 17.144582] calling quota_init+0x0/0x26 @ 1 [ 17.149434] initcall quota_init+0x0/0x26 returned 0 after 3 usecs [ 17.156314] calling proc_cmdline_init+0x0/0x22 @ 1 [ 17.161843] initcall proc_cmdline_init+0x0/0x22 returned 0 after 1 usecs [ 17.169403] calling proc_consoles_init+0x0/0x22 @ 1 [ 17.175028] initcall proc_consoles_init+0x0/0x22 returned 0 after 1 usecs [ 17.182685] calling proc_cpuinfo_init+0x0/0x22 @ 1 [ 17.188217] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 1 usecs [ 17.195776] calling proc_devices_init+0x0/0x22 @ 1 [ 17.201303] initcall proc_devices_init+0x0/0x22 returned 0 after 1 usecs [ 17.208865] calling proc_interrupts_init+0x0/0x22 @ 1 [ 17.214683] initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs [ 17.222536] calling proc_loadavg_init+0x0/0x22 @ 1 [ 17.228064] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs [ 17.235624] calling proc_meminfo_init+0x0/0x22 @ 1 [ 17.241151] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs [ 17.248713] calling proc_stat_init+0x0/0x22 @ 1 [ 17.253951] initcall proc_stat_init+0x0/0x22 returned 0 after 1 usecs [ 17.261221] calling proc_uptime_init+0x0/0x22 @ 1 [ 17.266652] initcall proc_uptime_init+0x0/0x22 returned 0 after 1 usecs [ 17.274115] calling proc_version_init+0x0/0x22 @ 1 [ 17.279644] initcall proc_version_init+0x0/0x22 returned 0 after 1 usecs [ 17.287205] calling proc_softirqs_init+0x0/0x22 @ 1 [ 17.292829] initcall proc_softirqs_init+0x0/0x22 returned 0 after 1 usecs [ 17.300488] calling proc_kcore_init+0x0/0xb6 @ 1 [ 17.305825] initcall proc_kcore_init+0x0/0xb6 returned 0 after 3 usecs [ 17.313188] calling proc_kmsg_init+0x0/0x26 @ 1 [ 17.318426] initcall proc_kmsg_init+0x0/0x26 returned 0 after 1 usecs [ 17.325695] calling proc_page_init+0x0/0x42 @ 1 [ 17.330933] initcall proc_page_init+0x0/0x42 returned 0 after 1 usecs [ 17.338230] calling init_devpts_fs+0x0/0x42 @ 1 [ 17.343498] initcall init_devpts_fs+0x0/0x42 returned 0 after 31 usecs [ 17.350836] calling init_ramfs_fs+0x0/0x11 @ 1 [ 17.355974] initcall init_ramfs_fs+0x0/0x11 returned 0 after 0 usecs [ 17.363147] calling init_hugetlbfs_fs+0x0/0x8e @ 1 [ 17.368725] initcall init_hugetlbfs_fs+0x0/0x8e returned 0 after 49 usecs [ 17.376333] calling ipc_init+0x0/0x2f @ 1 [ 17.380991] msgmni has been set to 3503 [ 17.385353] initcall ipc_init+0x0/0x2f returned 0 after 4262 usecs [ 17.392332] calling ipc_sysctl_init+0x0/0x14 @ 1 [ 17.397677] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 12 usecs [ 17.405130] calling init_mqueue_fs+0x0/0xaa @ 1 [ 17.410425] initcall init_mqueue_fs+0x0/0xaa returned 0 after 56 usecs [ 17.417737] calling key_proc_init+0x0/0x59 @ 1 [ 17.422876] initcall key_proc_init+0x0/0x59 returned 0 after 3 usecs [ 17.430047] calling selinux_nf_ip_init+0x0/0x63 @ 1 [ 17.435671] initcall selinux_nf_ip_init+0x0/0x63 returned 0 after 0 usecs [ 17.443330] calling init_sel_fs+0x0/0x94 @ 1 [ 17.448276] initcall init_sel_fs+0x0/0x94 returned 0 after 0 usecs [ 17.455256] calling selnl_init+0x0/0x4d @ 1 [ 17.460115] initcall selnl_init+0x0/0x4d returned 0 after 10 usecs [ 17.467084] calling sel_netif_init+0x0/0x66 @ 1 [ 17.472321] initcall sel_netif_init+0x0/0x66 returned 0 after 0 usecs [ 17.479592] calling sel_netnode_init+0x0/0x74 @ 1 [ 17.485022] initcall sel_netnode_init+0x0/0x74 returned 0 after 0 usecs [ 17.492487] calling sel_netport_init+0x0/0x74 @ 1 [ 17.497918] initcall sel_netport_init+0x0/0x74 returned 0 after 0 usecs [ 17.505382] calling aurule_init+0x0/0x37 @ 1 [ 17.510326] initcall aurule_init+0x0/0x37 returned 0 after 0 usecs [ 17.517308] calling crypto_wq_init+0x0/0x31 @ 1 [ 17.522596] initcall crypto_wq_init+0x0/0x31 returned 0 after 49 usecs [ 17.529913] calling crypto_algapi_init+0x0/0xd @ 1 [ 17.535441] initcall crypto_algapi_init+0x0/0xd returned 0 after 2 usecs [ 17.543000] calling skcipher_module_init+0x0/0x35 @ 1 [ 17.548818] initcall skcipher_module_init+0x0/0x35 returned 0 after 0 usecs [ 17.556671] calling chainiv_module_init+0x0/0x11 @ 1 [ 17.562395] initcall chainiv_module_init+0x0/0x11 returned 0 after 0 usecs [ 17.570148] calling eseqiv_module_init+0x0/0x11 @ 1 [ 17.575772] initcall eseqiv_module_init+0x0/0x11 returned 0 after 0 usecs [ 17.583431] calling md5_mod_init+0x0/0x11 @ 1 [ 17.588533] initcall md5_mod_init+0x0/0x11 returned 0 after 57 usecs [ 17.595649] calling krng_mod_init+0x0/0x11 @ 1 [ 17.600841] initcall krng_mod_init+0x0/0x11 returned 0 after 52 usecs [ 17.608059] calling proc_genhd_init+0x0/0x3d @ 1 [ 17.613394] initcall proc_genhd_init+0x0/0x3d returned 0 after 3 usecs [ 17.620759] calling bsg_init+0x0/0x129 @ 1 [ 17.625561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 17.633849] initcall bsg_init+0x0/0x129 returned 0 after 8142 usecs [ 17.640926] calling noop_init+0x0/0x14 @ 1 [ 17.645678] io scheduler noop registered [ 17.650137] initcall noop_init+0x0/0x14 returned 0 after 4353 usecs [ 17.657214] calling deadline_init+0x0/0x14 @ 1 [ 17.662352] io scheduler deadline registered [ 17.667201] initcall deadline_init+0x0/0x14 returned 0 after 4734 usecs [ 17.674667] calling cfq_init+0x0/0x9e @ 1 [ 17.679350] io scheduler cfq registered (default) [ 17.684654] initcall cfq_init+0x0/0x9e returned 0 after 5207 usecs [ 17.691634] calling percpu_counter_startup+0x0/0x38 @ 1 [ 17.697647] initcall percpu_counter_startup+0x0/0x38 returned 0 after 0 usecs [ 17.705693] calling pci_proc_init+0x0/0x60 @ 1 [ 17.710945] initcall pci_proc_init+0x0/0x60 returned 0 after 109 usecs [ 17.718200] calling pcie_portdrv_init+0x0/0x6d @ 1 [ 17.723775] pcieport 0000:00:01.0: setting latency timer to 64 [ 17.730522] pcieport 0000:00:03.0: setting latency timer to 64 [ 17.737107] pcieport 0000:00:05.0: setting latency timer to 64 [ 17.743701] pcieport 0000:00:07.0: setting latency timer to 64 [ 17.750291] pcieport 0000:00:09.0: setting latency timer to 64 [ 17.756890] pcieport 0000:00:1c.0: setting latency timer to 64 [ 17.763492] pcieport 0000:00:1c.4: setting latency timer to 64 [ 17.770092] initcall pcie_portdrv_init+0x0/0x6d returned 0 after 45276 usecs [ 17.777859] calling aer_service_init+0x0/0x23 @ 1 [ 17.783340] aer 0000:00:01.0:pcie02: service driver aer loaded [ 17.789918] aer 0000:00:03.0:pcie02: service driver aer loaded [ 17.796511] aer 0000:00:05.0:pcie02: service driver aer loaded [ 17.803101] aer 0000:00:07.0:pcie02: service driver aer loaded [ 17.809696] aer 0000:00:09.0:pcie02: service driver aer loaded [ 17.816262] initcall aer_service_init+0x0/0x23 returned 0 after 32201 usecs [ 17.824107] calling pcie_pme_service_init+0x0/0x11 @ 1 [ 17.830039] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 17.837875] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 17.845242] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 17.852614] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 17.860192] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 17.868029] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 17.875605] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 17.883442] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 17.890816] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 17.898390] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt [ 17.906230] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded [ 17.913805] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt [ 17.921646] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded [ 17.929266] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 17.937087] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 17.944657] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 17.952475] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 17.959848] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 17.967450] initcall pcie_pme_service_init+0x0/0x11 returned 0 after 134207 usecs [ 17.975842] calling ioapic_init+0x0/0x1a @ 1 [ 17.980826] initcall ioapic_init+0x0/0x1a returned 0 after 37 usecs [ 17.987866] calling pcifront_init+0x0/0x5d @ 1 [ 17.993003] initcall pcifront_init+0x0/0x5d returned -19 after 0 usecs [ 18.000371] calling fb_console_init+0x0/0x11b @ 1 [ 18.005818] initcall fb_console_init+0x0/0x11b returned 0 after 15 usecs [ 18.013363] calling xenfb_init+0x0/0x53 @ 1 [ 18.018212] initcall xenfb_init+0x0/0x53 returned -19 after 0 usecs [ 18.025288] calling vesafb_init+0x0/0x246 @ 1 [ 18.030371] initcall vesafb_init+0x0/0x246 returned -19 after 39 usecs [ 18.037700] calling efifb_init+0x0/0x201 @ 1 [ 18.042648] initcall efifb_init+0x0/0x201 returned -19 after 3 usecs [ 18.049821] calling acpi_reserve_resources+0x0/0xec @ 1 [ 18.055833] initcall acpi_reserve_resources+0x0/0xec returned 0 after 2 usecs [ 18.063879] calling irqrouter_init_ops+0x0/0x26 @ 1 [ 18.069502] initcall irqrouter_init_ops+0x0/0x26 returned 0 after 0 usecs [ 18.077161] calling xenbus_probe_initcall+0x0/0x37 @ 1 [ 18.083075] initcall xenbus_probe_initcall+0x0/0x37 returned 0 after 0 usecs [ 18.091025] calling xen_tmem_init+0x0/0x3 @ 1 [ 18.096067] initcall xen_tmem_init+0x0/0x3 returned 0 after 0 usecs [ 18.103146] calling gntdev_init+0x0/0x42 @ 1 [ 18.108149] initcall gntdev_init+0x0/0x42 returned 0 after 58 usecs [ 18.115167] calling hypervisor_subsys_init+0x0/0x20 @ 1 [ 18.121179] initcall hypervisor_subsys_init+0x0/0x20 returned 0 after 0 usecs [ 18.129226] calling hyper_sysfs_init+0x0/0x102 @ 1 [ 18.134759] initcall hyper_sysfs_init+0x0/0x102 returned 0 after 5 usecs [ 18.142315] calling platform_pci_module_init+0x0/0x2a @ 1 [ 18.148521] initcall platform_pci_module_init+0x0/0x2a returned -19 after 0 usecs [ 18.156955] calling pty_init+0x0/0x336 @ 1 [ 18.161758] initcall pty_init+0x0/0x336 returned 0 after 50 usecs [ 18.168592] calling sysrq_init+0x0/0x55 @ 1 [ 18.173441] initcall sysrq_init+0x0/0x55 returned 0 after 3 usecs [ 18.180323] calling xen_hvc_init+0x0/0xbe @ 1 [ 18.185552] initcall xen_hvc_init+0x0/0xbe returned 0 after 183 usecs [ 18.192640] calling serial8250_init+0x0/0x181 @ 1 [ 18.198069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 18.270241] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.449652] initcall serial8250_init+0x0/0x181 returned 0 after 245684 usecs [ 18.457411] calling serial8250_pnp_init+0x0/0x11 @ 1 [ 18.534284] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.585660] initcall serial8250_pnp_init+0x0/0x11 returned 0 after 119652 usecs [ 18.593719] calling serial8250_pci_init+0x0/0x1a @ 1 [ 18.599478] initcall serial8250_pci_init+0x0/0x1a returned 0 after 38 usecs [ 18.607294] calling rand_initialize+0x0/0x2c @ 1 [ 18.612635] initcall rand_initialize+0x0/0x2c returned 0 after 10 usecs [ 18.620090] calling hpet_init+0x0/0x60 @ 1 [ 18.624976] hpet_acpi_add: no address or irqs in _CRS [ 18.630573] initcall hpet_init+0x0/0x60 returned 0 after 5594 usecs [ 18.637639] calling agp_init+0x0/0x26 @ 1 [ 18.642292] Linux agpgart interface v0.103 [ 18.646949] initcall agp_init+0x0/0x26 returned 0 after 4546 usecs [ 18.653927] calling agp_amd64_mod_init+0x0/0x21 @ 1 [ 18.659578] initcall agp_amd64_mod_init+0x0/0x21 returned -19 after 25 usecs [ 18.667501] calling agp_intel_init+0x0/0x2a @ 1 [ 18.672755] initcall agp_intel_init+0x0/0x2a returned 0 after 17 usecs [ 18.680106] calling agp_sis_init+0x0/0x2a @ 1 [ 18.685159] initcall agp_sis_init+0x0/0x2a returned 0 after 11 usecs [ 18.692321] calling agp_via_init+0x0/0x2a @ 1 [ 18.697377] initcall agp_via_init+0x0/0x2a returned 0 after 12 usecs [ 18.704539] calling topology_sysfs_init+0x0/0x4b @ 1 [ 18.710307] initcall topology_sysfs_init+0x0/0x4b returned 0 after 46 usecs [ 18.718114] calling xen_blkif_init+0x0/0x253 @ 1 [ 18.723911] initcall xen_blkif_init+0x0/0x253 returned 0 after 455 usecs [ 18.731289] calling mac_hid_init+0x0/0x22 @ 1 [ 18.736335] initcall mac_hid_init+0x0/0x22 returned 0 after 4 usecs [ 18.743408] calling net_olddevs_init+0x0/0x96 @ 1 [ 18.748841] initcall net_olddevs_init+0x0/0x96 returned 0 after 2 usecs [ 18.756304] calling netback_init+0x0/0x20f @ 1 [ 18.762154] initcall netback_init+0x0/0x20f returned 0 after 694 usecs [ 18.769338] calling i8042_init+0x0/0x3a0 @ 1 [ 18.774317] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 18.782816] i8042: No controller found [ 18.786897] initcall i8042_init+0x0/0x3a0 returned -19 after 12317 usecs [ 18.794459] calling mousedev_init+0x0/0x83 @ 1 [ 18.799639] mousedev: PS/2 mouse device common for all mice [ 18.805901] initcall mousedev_init+0x0/0x83 returned 0 after 6155 usecs [ 18.813366] calling atkbd_init+0x0/0x26 @ 1 [ 18.818241] initcall atkbd_init+0x0/0x26 returned 0 after 26 usecs [ 18.825196] calling xenkbd_init+0x0/0x54 @ 1 [ 18.830140] initcall xenkbd_init+0x0/0x54 returned -19 after 0 usecs [ 18.837314] calling cmos_init+0x0/0x6b @ 1 [ 18.842104] rtc_cmos 00:03: RTC can wake from S4 [ 18.847414] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 18.854233] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 18.860787] initcall cmos_init+0x0/0x6b returned 0 after 18281 usecs [ 18.867954] calling init_ladder+0x0/0x11 @ 1 [ 18.872896] cpuidle: using governor ladder [ 18.877551] initcall init_ladder+0x0/0x11 returned 0 after 4546 usecs [ 18.884822] calling init_menu+0x0/0x11 @ 1 [ 18.889574] cpuidle: using governor menu [ 18.894032] initcall init_menu+0x0/0x11 returned 0 after 4352 usecs [ 18.901110] calling ledtrig_ide_init+0x0/0x1b @ 1 [ 18.906542] initcall ledtrig_ide_init+0x0/0x1b returned 0 after 0 usecs [ 18.914006] calling staging_init+0x0/0x3 @ 1 [ 18.918951] initcall staging_init+0x0/0x3 returned 0 after 0 usecs [ 18.925931] calling flow_cache_init_global+0x0/0x11c @ 1 [ 18.932082] initcall flow_cache_init_global+0x0/0x11c returned 0 after 39 usecs [ 18.940282] calling llc_init+0x0/0x20 @ 1 [ 18.944936] initcall llc_init+0x0/0x20 returned 0 after 0 usecs [ 18.951625] calling snap_init+0x0/0x39 @ 1 [ 18.956377] initcall snap_init+0x0/0x39 returned 0 after 1 usecs [ 18.963162] calling rif_init+0x0/0x85 @ 1 [ 18.967824] initcall rif_init+0x0/0x85 returned 0 after 7 usecs [ 18.974506] calling blackhole_module_init+0x0/0x11 @ 1 [ 18.980422] initcall blackhole_module_init+0x0/0x11 returned 0 after 0 usecs [ 18.988371] calling init_cgroup_cls+0x0/0x3d @ 1 [ 18.993705] initcall init_cgroup_cls+0x0/0x3d returned 0 after 0 usecs [ 19.001071] calling sysctl_ipv4_init+0x0/0x81 @ 1 [ 19.006634] initcall sysctl_ipv4_init+0x0/0x81 returned 0 after 128 usecs [ 19.014161] calling init_syncookies+0x0/0x19 @ 1 [ 19.019515] initcall init_syncookies+0x0/0x19 returned 0 after 20 usecs [ 19.026960] calling ipv4_netfilter_init+0x0/0x11 @ 1 [ 19.032679] initcall ipv4_netfilter_init+0x0/0x11 returned 0 after 0 usecs [ 19.040437] calling cubictcp_register+0x0/0x6c @ 1 [ 19.045962] TCP cubic registered [ 19.049647] initcall cubictcp_register+0x0/0x6c returned 0 after 3598 usecs [ 19.057500] calling inet6_init+0x0/0x2b0 @ 1 [ 19.062563] NET: Registered protocol family 10 [ 19.068002] initcall inet6_init+0x0/0x2b0 returned 0 after 5423 usecs [ 19.075088] calling mip6_init+0x0/0xba @ 1 [ 19.079838] Mobile IPv6 [ 19.082651] initcall mip6_init+0x0/0xba returned 0 after 2746 usecs [ 19.089729] calling packet_init+0x0/0x3d @ 1 [ 19.094674] NET: Registered protocol family 17 [ 19.099718] initcall packet_init+0x0/0x3d returned 0 after 4925 usecs [ 19.106988] calling dcbnl_init+0x0/0x47 @ 1 [ 19.111836] initcall dcbnl_init+0x0/0x47 returned 0 after 0 usecs [ 19.118719] calling init_dns_resolver+0x0/0x103 @ 1 [ 19.124342] Registering the dns_resolver key type [ 19.129696] initcall init_dns_resolver+0x0/0x103 returned 0 after 5226 usecs [ 19.137630] calling mcheck_debugfs_init+0x0/0x3d @ 1 [ 19.143364] initcall mcheck_debugfs_init+0x0/0x3d returned 0 after 17 usecs [ 19.151199] calling severities_debugfs_init+0x0/0x3c @ 1 [ 19.157310] initcall severities_debugfs_init+0x0/0x3c returned 0 after 1 usecs [ 19.165453] calling hpet_insert_resource+0x0/0x24 @ 1 [ 19.171270] initcall hpet_insert_resource+0x0/0x24 returned 0 after 0 usecs [ 19.179122] calling update_mp_table+0x0/0x57c @ 1 [ 19.184552] initcall update_mp_table+0x0/0x57c returned 0 after 0 usecs [ 19.192017] calling lapic_insert_resource+0x0/0x3f @ 1 [ 19.197933] initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs [ 19.205882] calling io_apic_bug_finalize+0x0/0x16 @ 1 [ 19.211703] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs [ 19.219554] calling check_early_ioremap_leak+0x0/0x65 @ 1 [ 19.225758] initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs [ 19.233999] calling pat_memtype_list_init+0x0/0x32 @ 1 [ 19.239915] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 1 usecs [ 19.247864] calling sched_init_debug+0x0/0x24 @ 1 [ 19.253294] initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs [ 19.260761] calling init_oops_id+0x0/0x31 @ 1 [ 19.265804] initcall init_oops_id+0x0/0x31 returned 0 after 2 usecs [ 19.272879] calling printk_late_init+0x0/0x46 @ 1 [ 19.278309] initcall printk_late_init+0x0/0x46 returned 0 after 0 usecs [ 19.285775] calling pm_qos_power_init+0x0/0xc0 @ 1 [ 19.291369] initcall pm_qos_power_init+0x0/0xc0 returned 0 after 65 usecs [ 19.298961] calling software_resume+0x0/0x1ee @ 1 [ 19.304389] PM: Hibernation image not present or could not be loaded. [ 19.311662] initcall software_resume+0x0/0x1ee returned -2 after 7101 usecs [ 19.319517] initcall software_resume+0x0/0x1ee returned with error code -2 [ 19.327368] calling debugfs_kprobe_init+0x0/0x87 @ 1 [ 19.333092] initcall debugfs_kprobe_init+0x0/0x87 returned 0 after 3 usecs [ 19.340873] calling taskstats_init+0x0/0x90 @ 1 [ 19.346109] registered taskstats version 1 [ 19.350762] initcall taskstats_init+0x0/0x90 returned 0 after 4544 usecs [ 19.358324] calling clear_boot_tracer+0x0/0x2d @ 1 [ 19.363850] initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs [ 19.371413] calling max_swapfiles_check+0x0/0x3 @ 1 [ 19.377037] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs [ 19.384698] calling random32_reseed+0x0/0xa6 @ 1 [ 19.390066] initcall random32_reseed+0x0/0xa6 returned 0 after 37 usecs [ 19.397494] calling pci_resource_alignment_sysfs_init+0x0/0x18 @ 1 [ 19.404573] initcall pci_resource_alignment_sysfs_init+0x0/0x18 returned 0 after 1 usecs [ 19.413686] calling pci_sysfs_init+0x0/0x4c @ 1 [ 19.419728] initcall pci_sysfs_init+0x0/0x4c returned 0 after 786 usecs [ 19.427010] calling boot_wait_for_devices+0x0/0x30 @ 1 [ 19.432924] initcall boot_wait_for_devices+0x0/0x30 returned 0 after 0 usecs [ 19.440874] calling regulator_init_complete+0x0/0x16e @ 1 [ 19.447079] initcall regulator_init_complete+0x0/0x16e returned 0 after 0 usecs [ 19.455320] calling seqgen_init+0x0/0xf @ 1 [ 19.460177] initcall seqgen_init+0x0/0xf returned 0 after 9 usecs [ 19.467052] calling rtc_hctosys+0x0/0x111 @ 1 [ 19.472157] rtc_cmos 00:03: setting system clock to 2011-08-01 19:51:50 UTC (1312228310) [ 19.481208] initcall rtc_hctosys+0x0/0x111 returned 0 after 8898 usecs [ 19.488577] calling memmap_init+0x0/0x2a @ 1 [ 19.493569] initcall memmap_init+0x0/0x2a returned 0 after 47 usecs [ 19.500599] calling pci_mmcfg_late_insert_resources+0x0/0x56 @ 1 [ 19.507484] initcall pci_mmcfg_late_insert_resources+0x0/0x56 returned 0 after 0 usecs [ 19.516403] calling init_net_drop_monitor+0x0/0x106 @ 1 [ 19.522413] Initializing network drop monitor service [ 19.528152] initcall init_net_drop_monitor+0x0/0x106 returned 0 after 5602 usecs [ 19.536473] calling tcp_congestion_default+0x0/0x11 @ 1 [ 19.542484] initcall tcp_congestion_default+0x0/0x11 returned 0 after 0 usecs [ 19.550531] calling initialize_hashrnd+0x0/0x1a @ 1 [ 19.556158] initcall initialize_hashrnd+0x0/0x1a returned 0 after 2 usecs [ 19.563865] async_waiting @ 1 [ 19.567207] async_continuing @ 1 after 0 usec [ 19.572391] Freeing unused kernel memory: 572k freed [ 19.577905] Write protecting the kernel read-only data: 6144k [ 19.586990] Freeing unused kernel memory: 800k freed [ 19.592870] Freeing unused kernel memory: 868k freed Loading, please wait... [ 19.701178] udev[100]: starting version 164 [ 19.753056] calling dca_init+0x0/0x1f [dca] @ 189 [ 19.758305] dca service started, version 1.12.1 [ 19.763470] initcall dca_init+0x0/0x1f [dca] returned 0 after 5041 usecs [ 19.775875] calling igb_init_module+0x0/0x5d [igb] @ 189 [ 19.779470] calling init_scsi+0x0/0x87 [scsi_mod] @ 191 [ 19.779597] SCSI subsystem initialized [ 19.779607] initcall init_scsi+0x0/0x87 [scsi_mod] returned 0 after 123 usecs [ 19.793405] calling megasas_init+0x0/0x1e0 [megaraid_sas] @ 191 [ 19.793408] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011 [ 19.793428] megasas: 0x1000:0x0060:0x8086:0x1021: bus 3:slot 0:func 0 [ 19.793445] xen: registering gsi 26 triggering 0 polarity 1 [ 19.793449] xen_map_pirq_gsi: returning irq 26 for gsi 26 [ 19.793451] xen: --> pirq=26 -> irq=26 (gsi=26) [ 19.793455] Already setup the GSI :26 [ 19.793458] megaraid_sas 0000:03:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 [ 19.793465] megaraid_sas 0000:03:00.0: setting latency timer to 64 [ 19.858432] m(XEN) IOAPIC[1]: Set PCI routing entry (9-16 -> 0x41 -> IRQ 40 Mode:1 Active:1) egasas: FW now in Ready state [ 19.858438] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2 [ 19.858445] Copyright (c) 2007-2011 Intel Corporation. [ 19.858481] xen: registering gsi 40 triggering 0 polarity 1 [ 19.858493] xen: --> pirq=40 -> irq=40 (gsi=40) [ 19.867816] igb 0000:01:00.0: PCI INT B -> GSI 40 (level, low) -> IRQ 40 [ 19.867833] igb 0000:01:00.0: setting latency timer to 64 [ 19.922227] calling usb_init+0x0/0x173 [usbcore] @ 210 [ 19.928260] usbcore: registered new interface driver usbfs [ 19.934391] usbcore: registered new interface driver hub [ 19.936784] calling ata_init+0x0/0x301 [libata] @ 222 [ 19.948433] usbcore: registered new device driver usb [ 19.948549] l(XEN) IOAPIC[0]: Set PCI routing entry (8-18 -> 0x99 -> IRQ 18 Mode:1 Active:1) ibata version 3.00 loaded. [ 19.948563] initcall ata_init+0x0/0x301 [libata] returned 0 after 11490 usecs [ 19.955091] calling ahci_init+0x0/0x20 [ahci] @ 222 [ 19.955121] ahci 0000:00:1f.2: version 3.0 [ 19.955138] xen: registering gsi 18 triggering 0 polarity 1 [ 19.955151] xen: --> pirq=18 -> irq=18 (gsi=18) [ 19.963395] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 20.003637] initcall usb_init+0x0/0x173 [usbcore] returned 0 after 73857 usecs [ 20.012535] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 20.012559] megasas_init_mfi: fw_support_ieee=0 [ 20.012562] megasas: INIT adapter done [ 20.022910] calling ehci_hcd_init+0x0/0x7d [ehci_hcd] @ 210 [ 20.022913] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 20.044742] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 20.053334] ahci 0000:00:1f.2: setting latency timer to 64 [ 20.063021] scsi1 : ahci [ 20.066117] scsi2 : ahci [ 20.069003] scsi3 : ahci [ 20.074157] scsi4 : ahci [ 20.076998] scsi5 : ahci [ 20.079936] scsi6 : ahci [ 20.083018] ata1: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20100 irq 375 [ 20.091272] ata2: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20180 irq 375 [ 20.099710] ata3: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20200 irq 375 [ 20.108185] ata4: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20280 irq 375 [ 20.109718] scsi0 : LSI SAS based MegaRAID driver [ 20.118170] initcall megasas_init+0x0/0x1e0 [megaraid_sas] returned 0 after 317142 usecs [ 20.131024] ata5: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20300 irq 375 [ 20.139457] ata6: SATA max UDMA/133 abar m2048@0xb1b20000 port 0xb1b20380 irq 375 [ 20.147931] i(XEN) IOAPIC[0]: Set PCI routing entry (8-19 -> 0xb9 -> IRQ 19 Mode:1 Active:1) nitcall ahci_init+0x0/0x20 [ahci] returned 0 after 188313 usecs [ 20.147934] xen: registering gsi 19 triggering 0 polarity 1 [ 20.147947] xen: --> pirq=19 -> irq=19 (gsi=19) [ 20.157309] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 20.183224] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 20.188417] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection [ 20.188420] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:1e:67:11:1c:b4 [ 20.188497] igb 0000:01:00.0: eth0: PBA No: 1040FF-0FF [ 20.188499] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 20.188517] xen: registering gsi 28 triggering 0 polarity 1 [ 20.188520] xen_map_pirq_gsi: returning irq 28 for gsi 28 [ 20.188522] xen: --> pirq=28 -> irq=28 (gsi=28) [ 20.188524] Already setup the GSI :28 [ 20.188527] igb 0000:01:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 20.188541] igb 0000:01:00.1: setting latency timer to 64 [ 20.255322] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 20.261256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 20.269647] ehci_hcd 0000:00:1a.7: debug port 1 [ 20.278602] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 20.286102] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xb1b22000 [ 20.305649] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 20.311984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.319613] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.327756] usb usb1: Product: EHCI Host Controller [ 20.333282] usb usb1: Manufacturer: Linux 3.0.0 ehci_hcd [ 20.339321] usb usb1: SerialNumber: 0000:00:1a.7 [ 20.344666] hub 1-0:1.0: USB hub found [ 20.348835] hub 1-0:1.0: 6 ports detected [ 20.353473] xen: registering gsi 16 triggering 0 polarity 1 [ 20.359682] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 20.365790] xen: --> pirq=16 -> irq=16 (gsi=16) [ 20.370938] Already setup the GSI :16 [ 20.375099] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 20.378137] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection [ 20.378140] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:1e:67:11:1c:b5 [ 20.378216] igb 0000:01:00.1: eth1: PBA No: 1040FF-0FF [ 20.378218] igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 20.378244] initcall igb_init_module+0x0/0x5d [igb] returned 0 after 507654 usecs [ 20.421764] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 20.428328] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 20.434248] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 20.442630] ehci_hcd 0000:00:1d.7: debug port 1 [ 20.451599] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 20.459126] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xb1b21000 [ 20.477653] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 20.483985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.491627] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.493666] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.493701] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.493736] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.493768] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.493800] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.494313] ata4.00: ATA-8: ST3500411SV, CV15, max UDMA/133 [ 20.494316] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 20.494719] ata5.00: ATA-8: ST3500418AS, CC37, max UDMA/133 [ 20.494722] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 20.494829] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 20.494831] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 20.494880] ata2.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 20.494883] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 20.495135] ata4.00: configured for UDMA/133 [ 20.495344] ata3.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 20.495346] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 20.495944] ata5.00: configured for UDMA/133 [ 20.496055] ata1.00: configured for UDMA/133 [ 20.496109] ata2.00: configured for UDMA/133 [ 20.496151] scsi 1:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 20.496345] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 20.497340] ata3.00: configured for UDMA/133 [ 20.497425] scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 20.497572] scsi 4:0:0:0: Direct-Access ATA ST3500411SV CV15 PQ: 0 ANSI: 5 [ 20.497744] scsi 5:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5 [ 20.501668] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.502732] ata6.00: ATA-8: ST3500413AS, JC4B, max UDMA/133 [ 20.502734] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 20.504025] ata6.00: configured for UDMA/133 [ 20.504092] scsi 6:0:0:0: Direct-Access ATA ST3500413AS JC4B PQ: 0 ANSI: 5 [ 20.617220] calling init_sd+0x0/0x153 [sd_mod] @ 290 [ 20.617813] initcall init_sd+0x0/0x153 [sd_mod] returned 0 after 571 usecs [ 20.633706] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 20.633725] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 20.633807] sd 1:0:0:0: [sda] Write Protect is off [ 20.633810] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.633819] sd 2:0:0:0: [sdb] Write Protect is off [ 20.633822] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 20.633855] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.633859] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.634192] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 20.634275] sd 3:0:0:0: [sdc] Write Protect is off [ 20.634278] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 20.634312] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.640315] sdb: sdb1 sdb2 [ 20.641688] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 20.641699] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 20.641770] sd 4:0:0:0: [sdd] Write Protect is off [ 20.641773] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 20.641782] sd 5:0:0:0: [sde] Write Protect is off [ 20.641785] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 20.641808] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.641820] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.645697] sd 6:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 20.645803] sd 6:0:0:0: [sdf] Write Protect is off [ 20.645806] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 20.645849] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.651168] sda: sda1 sda2 [ 20.652720] sdc: sdc1 sdc2 [ 20.661655] sde: sde1 sde2 [ 20.663405] sdf: sdf1 sdf2 [ 20.691806] sdd: sdd1 sdd2 [ 20.919881] usb usb2: Product: EHCI Host Controller [ 20.925405] usb usb2: Manufacturer: Linux 3.0.0 ehci_hcd [ 20.931416] usb usb2: SerialNumber: 0000:00:1d.7 [ 20.937011] sd 5:0:0:0: [sde] Attached SCSI disk [ 20.937014] sd 3:0:0:0: [sdc] Attached SCSI disk [ 20.937082] sd 1:0:0:0: [sda] Attached SCSI disk [ 20.937091] sd 6:0:0:0: [sdf] Attached SCSI disk [ 20.937310] sd 4:0:0:0: [sdd] Attached SCSI disk [ 20.954257] sd 2:0:0:0: [sdb] Attached SCSI disk [ 20.968501] hub 2-0:1.0: USB hub found [ 20.972614] hub 2-0:1.0: 6 ports detected [ 20.977308] initcall ehci_hcd_init+0x0/0x7d [ehci_hcd] returned 0 after 932018 usecs [ 20.987113] calling uhci_hcd_init+0x0/0xbf [uhci_hcd] @ 210 [ 20.993333] uhci_hcd: USB Universal Host Controller Interface driver [ 21.000560] xen: registering gsi 19 triggering 0 polarity 1 [ 21.006847] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 21.012930] xen: --> pirq=19 -> irq=19 (gsi=19) [ 21.018074] Already setup the GSI :19 [ 21.022233] uhci_hcd 0000:00:1a.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 21.030302] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 21.036881] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 21.042803] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 21.051169] uhci_hcd 0000:00:1a.0: irq 19, io base 0x000030e0 [ 21.057703] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.065277] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.073418] usb usb3: Product: UHCI Host Controller [ 21.078943] usb usb3: Manufacturer: Linux 3.0.0 uhci_hcd [ 21.084954] usb usb3: SerialNumber: 0000:00:1a.0 [ 21.090480] hub 3-0:1.0: USB hub found [ 21.094599] hub 3-0:1.0: 2 ports detected [ 21.099283] xen: registering gsi 19 triggering 0 polarity 1 [ 21.105451] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 21.111532] xen: --> pirq=19 -> irq=19 (gsi=19) [ 21.116688] Already setup the GSI :19 [ 21.120844] uhci_hcd 0000:00:1a.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 21.128918] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 21.135485] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 21.141425] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 21.149784] uhci_hcd 0000:00:1a.1: irq 19, io base 0x000030c0 [ 21.156304] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.163890] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.172033] usb usb4: Product: UHCI Host Controller [ 21.177559] usb usb4: Manufacturer: Linux 3.0.0 uhci_hcd [ 21.183584] usb usb4: SerialNumber: 0000:00:1a.1 [ 21.189045] hub 4-0:1.0: USB hub found [ 21.193163] hub 4-0:1.0: 2 ports detected [ 21.197839] xen: registering gsi 19 triggering 0 polarity 1 [ 21.203996] xen_map_pirq_gsi: returning irq 19 for gsi 19 [ 21.210111] xen: --> pirq=19 -> irq=19 (gsi=19) [ 21.215315] Already setup the GSI :19 [ 21.219412] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 21.227523] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 21.234070] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 21.240011] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 21.248353] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000030a0 [ 21.254885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.262453] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.270598] usb usb5: Product: UHCI Host Controller [ 21.276125] usb usb5: Manufacturer: Linux 3.0.0 uhci_hcd [ 21.282136] usb usb5: SerialNumber: 0000:00:1a.2 [ 21.287532] hub 5-0:1.0: USB hub found [ 21.291650] hub 5-0:1.0: 2 ports detected [ 21.296299] xen: registering gsi 16 triggering 0 polarity 1 [ 21.302512] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 21.308604] xen: --> pirq=16 -> irq=16 (gsi=16) [ 21.313752] Already setup the GSI :16 [ 21.317914] uhci_hcd 0000:00:1d.0: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 21.325975] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 21.332559] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.338518] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 21.346891] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 21.353401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.360989] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.369145] usb usb6: Product: UHCI Host Controller [ 21.374658] usb usb6: Manufacturer: Linux 3.0.0 uhci_hcd [ 21.380669] usb usb6: SerialNumber: 0000:00:1d.0 [ 21.386188] hub 6-0:1.0: USB hub found [ 21.390295] hub 6-0:1.0: 2 ports detected [ 21.394943] xen: registering gsi 16 triggering 0 polarity 1 [ 21.401148] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 21.407250] xen: --> pirq=16 -> irq=16 (gsi=16) [ 21.412387] Already setup the GSI :16 [ 21.416543] uhci_hcd 0000:00:1d.1: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 21.424655] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 21.431188] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.437127] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 21.445486] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00003060 [ 21.452093] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.459590] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.467734] usb usb7: Product: UHCI Host Controller [ 21.473259] usb usb7: Manufacturer: Linux 3.0.0 uhci_hcd [ 21.479268] usb usb7: SerialNumber: 0000:00:1d.1 [ 21.484762] hub 7-0:1.0: USB hub found [ 21.488897] hub 7-0:1.0: 2 ports detected [ 21.493499] xen: registering gsi 16 triggering 0 polarity 1 [ 21.499704] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 21.505813] xen: --> pirq=16 -> irq=16 (gsi=16) [ 21.510966] Already setup the GSI :16 [ 21.515125] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 21.523227] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 21.529761] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.535682] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 21.544139] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040 [ 21.550570] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 21.558170] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.566313] usb usb8: Product: UHCI Host Controller [ 21.571840] usb usb8: Manufacturer: Linux 3.0.0 uhci_hcd [ 21.577849] usb usb8: SerialNumber: 0000:00:1d.2 [ 21.583281] hub 8-0:1.0: USB hub found [ 21.587377] hub 8-0:1.0: 2 ports detected [ 21.592012] initcall uhci_hcd_init+0x0/0xbf [uhci_hcd] returned 0 after 584644 usecs [ 21.633652] usb 5-1: new full speed USB device number 2 using uhci_hcd [ 21.804917] usb 5-1: New USB device found, idVendor=046b, idProduct=ff10 [ 21.812298] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 21.820343] usb 5-1: Product: Virtual Keyboard and Mouse [ 21.826356] usb 5-1: Manufacturer: American Megatrends Inc. [ 21.832657] usb 5-1: SerialNumber: serial [ 21.851010] calling hid_init+0x0/0x5c [hid] @ 356 [ 21.856283] initcall hid_init+0x0/0x5c [hid] returned 0 after 23 usecs [ 21.865095] calling hid_init+0x0/0x78 [usbhid] @ 356 [ 21.875139] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 21.888798] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input0 [ 21.909112] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input1 [ 21.922778] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input1 [ 21.939000] usbcore: registered new interface driver usbhid [ 21.945286] usbhid: USB HID core driver [ 21.949653] initcall hid_init+0x0/0x78 [usbhid] returned 0 after 77168 usecs [ 21.957648] usb 6-2: new low speed USB device number 2 using uhci_hcd [ 22.049841] calling wait_scan_init+0x0/0xd [scsi_wait_scan] @ 362 [ 22.056641] initcall wait_scan_init+0x0/0xd [scsi_wait_scan] returned 0 after 0 usecs [ 22.154398] usb 6-2: New USB device found, idVendor=046a, idProduct=0011 [ 22.161779] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 22.211631] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input2 [ 22.221738] generic-usb 0003:046A:0011.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-2/input0 [ 27.143932] calling md_init+0x0/0x143 [md_mod] @ 376 [ 27.149536] initcall md_init+0x0/0x143 [md_mod] returned 0 after 61 usecs [ 27.158129] calling raid_init+0x0/0x12 [raid1] @ 376 [ 27.163667] md: raid1 personality registered for level 1 [ 27.169680] initcall raid_init+0x0/0x12 [raid1] returned 0 after 5870 usecs [ 27.180280] calling raid_init+0x0/0x11 [raid10] @ 378 [ 27.185914] md: raid10 personality registered for level 10 [ 27.192121] initcall raid_init+0x0/0x11 [raid10] returned 0 after 6060 usecs [ 27.285406] md: md126 stopped. [ 27.299362] md: bind [ 27.314901] md: bind [ 27.318072] md: bind [ 27.321159] md: bind [ 27.324269] md: bind [ 27.327383] md: bind [ 27.332006] bio: create slab at 1 [ 27.336467] md/raid1:md126: active with 6 out of 6 mirrors [ 27.342643] md126: detected capacity change from 0 to 254869504 [ 27.351569] md126: unknown partition table [ 27.360565] md: md0 stopped. [ 27.370267] md: bind [ 27.373360] md: bind [ 27.376559] md: bind [ 27.401186] md: bind [ 27.406432] md: bind [ 27.409529] md: bind [ 27.414275] md/raid10:md0: active with 6 out of 6 devices [ 27.420217] md0: detected capacity change from 0 to 1497004769280 [ 27.429204] md0: unknown partition table [ 27.635294] calling dm_init+0x0/0x42 [dm_mod] @ 408 [ 27.640807] device-mapper: uevent: version 1.0.3 [ 27.646048] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx [ 27.655477] initcall dm_init+0x0/0x42 [dm_mod] returned 0 after 14393 usecs [ 27.671126] calling dm_crypt_init+0x0/0x5f [dm_crypt] @ 411 [ 27.677381] initcall dm_crypt_init+0x0/0x5f [dm_crypt] returned 0 after 37 usecs [ 62.586804] calling crypto_cbc_module_init+0x0/0x12 [cbc] @ 423 [ 62.593409] initcall crypto_cbc_module_init+0x0/0x12 [cbc] returned 0 after 0 usecs [ 62.603817] calling aes_init+0x0/0x11 [aes_generic] @ 425 [ 62.609893] initcall aes_init+0x0/0x11 [aes_generic] returned 0 after 51 usecs [ 62.618325] calling aes_init+0x0/0x12 [aes_x86_64] @ 425 [ 62.624298] initcall aes_init+0x0/0x12 [aes_x86_64] returned 0 after 45 usecs [ 62.638239] calling sha256_generic_mod_init+0x0/0x35 [sha256_generic] @ 437 [ 62.646102] initcall sha256_generic_mod_init+0x0/0x35 [sha256_generic] returned 0 after 92 usecs [ 67.834994] calling dm_snapshot_init+0x0/0x210 [dm_snapshot] @ 782 [ 67.841925] initcall dm_snapshot_init+0x0/0x210 [dm_snapshot] returned 0 after 33 usecs [ 109.249309] calling init_mbcache+0x0/0x14 [mbcache] @ 824 [ 109.255334] initcall init_mbcache+0x0/0x14 [mbcache] returned 0 after 0 usecs [ 109.265511] calling journal_init+0x0/0x8f [jbd] @ 824 [ 109.271299] initcall journal_init+0x0/0x8f [jbd] returned 0 after 155 usecs [ 109.284061] calling init_ext3_fs+0x0/0x67 [ext3] @ 824 [ 109.289878] initcall init_ext3_fs+0x0/0x67 [ext3] returned 0 after 80 usecs [ 109.303774] EXT3-fs: barriers not enabled [ 109.322825] kjournald starting. Commit interval 5 seconds [ 109.322853] EXT3-fs (dm-42): mounted filesystem with ordered data mode INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevdudevd[873]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /lib/udev/rules.d/52-nut-usbups.rules:6 [ 110.472122] udev[874]: starting version 164 . Synthesizing the initial hotplug events...udevd[874]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /lib/udev/rules.d/52-nut-usbups.rules:6 done. Waiting for /dev to be fully populated...[ 110.787632] calling thermal_init+0x0/0x6b [thermal_sys] @ 924 [ 110.794119] initcall thermal_init+0x0/0x6b [thermal_sys] returned 0 after 65 usecs [ 110.868804] calling acpi_button_init+0x0/0x12 [button] @ 943 [ 110.876567] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 110.885600] ACPI: Sleep Button [SLPB] [ 110.889929] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 110.898124] ACPI: Power Button [PWRF] [ 110.902528] initcall acpi_button_init+0x0/0x12 [button] returned 0 after 26761 usecs [ 110.916461] calling pcspkr_init+0x0/0x12 [pcspkr] @ 1093 [ 110.917208] calling evdev_init+0x0/0x11 [evdev] @ 1103 [ 110.917370] initcall evdev_init+0x0/0x11 [evdev] returned 0 after 154 usecs [ 110.938410] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 110.945699] initcall pcspkr_init+0x0/0x12 [pcspkr] returned 0 after 9298 usecs [ 110.958355] calling acpi_processor_init+0x0/0xd0 [processor] @ 932 [ 110.965253] ACPI: acpi_idle registered with cpuidle [ 110.976140] initcall acpi_processor_init+0x0/0xd0 [processor] returned 0 after 10628 usecs [ 111.005425] calling joydev_init+0x0/0x11 [joydev] @ 1105 [ 111.011462] initcall joydev_init+0x0/0x11 [joydev] returned 0 after 104 usecs [ 111.105626] calling ioat_init_module+0x0/0x86 [ioatdma] @ 1048 [ 111.112137] c(XEN) IOAPIC[1]: Set PCI routing entry (9-19 -> 0x5a -> IRQ 43 Mode:1 Active:1) alling i2c_init+0x0/0x65 [i2c_core] @ 1068 [ 111.112140] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 111.112208] xen: registering gsi 43 triggering 0 polarity 1 [ 111.112222] xen: --> pirq=43 -> irq=43 (gsi=43) [ 111.121555] ioatdma 0000:00:16.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 111.152075] initcall i2c_init+0x0/0x65 [i2c_core] returned 0 after 56 usecs [ 111.152430] ioatdma 0000:00:16.0: setting latency timer to 64 [ 111.166853] xen: registering gsi 44 triggering 0 polarity 1 [ 111.173012] xen: --> pirq=44 -> irq=44 (gsi=44) (XEN) IOAPIC[1]: Set PCI routing entry (9-20 -> 0x72 -> IRQ 44 Mode:1 Active:1) [ 111.185991] ioatdma 0000:00:16.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 111.194026] ioatdma 0000:00:16.1: setting latency timer to 64 [ 111.220143] xen: registering gsi 45 triggering 0 polarity 1 [ 111.253554] xen: --> pirq=45 -> irq=45 (gsi=45) (XEN) IOAPIC[1]: Set PCI routing entry (9-21 -> 0x92 -> IRQ 45 Mode:1 Active:1) [ 111.266388] ioatdma 0000:00:16.2: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 111.302337] ioatdma 0000:00:16.2: setting latency timer to 64 [ 111.302654] calling i2c_i801_init+0x0/0xca [i2c_i801] @ 1068 [ 111.334585] xen: registering gsi 46 triggering 0 polarity 1 [ 111.340737] xen: --> pirq=46 -> irq=46 (gsi=46) (XEN) IOAPIC[1]: Set PCI routing entry (9-22 -> 0xaa -> IRQ 46 Mode:1 Active:1) [ 111.353751] ioatdma 0000:00:16.3: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 111.362472] ioatdma 0000:00:16.3: setting latency timer to 64 [ 111.369527] xen: registering gsi 18 triggering 0 polarity 1 [ 111.369566] calling snd_mem_init+0x0/0x2c [snd_page_alloc] @ 1093 [ 111.369578] initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 5 usecs [ 111.391401] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 111.397465] xen: --> pirq=18 -> irq=18 (gsi=18) [ 111.402615] Already setup the GSI :18 [ 111.406776] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 111.411487] calling init_tis+0x0/0x9f [tpm_tis] @ 1101 [ 111.411510] initcall init_tis+0x0/0x9f [tpm_tis] returned 0 after 17 usecs [ 111.429452] xen: registering gsi 43 triggering 0 polarity 1 [ 111.429476] initcall i2c_i801_init+0x0/0xca [i2c_i801] returned 0 after 123842 usecs [ 111.444354] xen_map_pirq_gsi: returning irq 43 for gsi 43 [ 111.450410] xen: --> pirq=43 -> irq=43 (gsi=43) [ 111.455568] Already setup the GSI :43 [ 111.459745] ioatdma 0000:00:16.4: PCI INT A -> GSI 43 (level, low) -> IRQ 43 [ 111.467793] ioatdma 0000:00:16.4: setting latency timer to 64 [ 111.476650] xen: registering gsi 44 triggering 0 polarity 1 [ 111.482814] xen_map_pirq_gsi: returning irq 44 for gsi 44 [ 111.488883] xen: --> pirq=44 -> irq=44 (gsi=44) [ 111.494032] Already setup the GSI :44 [ 111.498216] ioatdma 0000:00:16.5: PCI INT B -> GSI 44 (level, low) -> IRQ 44 [ 111.506256] ioatdma 0000:00:16.5: setting latency timer to 64 [ 111.513066] xen: registering gsi 45 triggering 0 polarity 1 [ 111.519220] xen_map_pirq_gsi: returning irq 45 for gsi 45 [ 111.525295] xen: --> pirq=45 -> irq=45 (gsi=45) [ 111.530463] Already setup the GSI :45 [ 111.534644] ioatdma 0000:00:16.6: PCI INT C -> GSI 45 (level, low) -> IRQ 45 [ 111.542845] ioatdma 0000:00:16.6: setting latency timer to 64 [ 111.549794] xen: registering gsi 46 triggering 0 polarity 1 [ 111.555957] xen_map_pirq_gsi: returning irq 46 for gsi 46 [ 111.562057] xen: --> pirq=46 -> irq=46 (gsi=46) [ 111.567196] Already setup the GSI :46 [ 111.571360] ioatdma 0000:00:16.7: PCI INT D -> GSI 46 (level, low) -> IRQ 46 [ 111.579361] ioatdma 0000:00:16.7: setting latency timer to 64 [ 111.579749] calling init_soundcore+0x0/0x9a [soundcore] @ 1093 [ 111.579763] initcall init_soundcore+0x0/0x9a [soundcore] returned 0 after 9 usecs [ 111.601783] initcall ioat_init_module+0x0/0x86 [ioatdma] returned 0 after 478165 usecs [ 111.742833] calling alsa_sound_init+0x0/0x87 [snd] @ 1093 [ 111.748900] initcall alsa_sound_init+0x0/0x87 [snd] returned 0 after 35 usecs [ 111.767051] calling alsa_timer_init+0x0/0x164 [snd_timer] @ 1093 [ 111.773808] initcall alsa_timer_init+0x0/0x164 [snd_timer] returned 0 after 53 usecs [ 111.816740] calling alsa_pcm_init+0x0/0x67 [snd_pcm] @ 1093 [ 111.822964] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0 after 3 usecs [ 111.883348] calling pcsp_init+0x0/0x21 [snd_pcsp] @ 1093 [ 111.889274] Error: Driver 'pcspkr' is already registered, aborting... [ 111.896546] initcall pcsp_init+0x0/0x21 [snd_pcsp] returned -16 after 7100 usecs [ 111.904884] initcall pcsp_init+0x0/0x21 [snd_pcsp] returned with error code -16 done. Setting parameters of disc: (none). Assembling MD arrays...done (no arrays found in config file or automatically). Setting preliminary keymap...done. Activating swap...[ 114.185724] Adding 524284k swap on /dev/mapper/zven-dom0--swap. Priority:-1 extents:1 across:524284k done. [ 114.200765] EXT3-fs (dm-42): warning: maximal mount count reached, running e2fsck is recommended [ 114.238229] EXT3-fs (dm-42): using internal journal Starting early crypto disks...done. Cleaning up ifupdown.... Setting up networking.... [ 114.579139] calling ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] @ 1758 [ 114.587114] ipmi message handler version 39.2 [ 114.592051] initcall ipmi_init_msghandler_mod+0x0/0xd [ipmi_msghandler] returned 0 after 4832 usecs [ 114.648056] calling init_ipmi_si+0x0/0x98e [ipmi_si] @ 1758 [ 114.654285] IPMI System Interface driver. [ 114.658867] ipmi_si: probing via ACPI [ 114.663019] ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 114.669881] ipmi_si: Adding ACPI-specified kcs state machine [ 114.676288] ipmi_si: probing via SMBIOS [ 114.680643] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 114.687333] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 114.695866] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 114.849502] ipmi_si 00:0a: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21) [ 114.858631] ipmi_si 00:0a: IPMI kcs interface initialized [ 114.864738] initcall init_ipmi_si+0x0/0x98e [ipmi_si] returned 0 after 205530 usecs [ 114.942833] calling sensors_adm1021_init+0x0/0x19 [adm1021] @ 1792 [ 115.213653] initcall sensors_adm1021_init+0x0/0x19 [adm1021] returned 0 after 257735 usecs [ 115.293413] calling coretemp_init+0x0/0x75 [coretemp] @ 1796 [ 115.299789] coretemp coretemp.0: TjMax is 89 C. [ 115.305071] coretemp coretemp.0: TjMax is 89 C. [ 115.310062] coretemp coretemp.0: TjMax is 89 C. [ 115.315187] coretemp coretemp.0: TjMax is 89 C. [ 115.320331] coretemp coretemp.0: TjMax is 89 C. [ 115.325466] coretemp coretemp.0: TjMax is 89 C. [ 115.330600] initcall coretemp_init+0x0/0x75 [coretemp] returned 0 after 30148 usecs Loading kernel modules...done. Setting up LVM Volume Groups Reading all physical volumes. This may take a while... Found volume group "zven" using metadata type lvm2 69 logical volume(s) in volume group "zven" now active . Starting remaining crypto disks...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 done. Mounting local filesystems...[ 118.839630] calling init_ext2_fs+0x0/0x67 [ext2] @ 1849 [ 118.845534] initcall init_ext2_fs+0x0/0x67 [ext2] returned 0 after 69 usecs [ 118.854557] EXT2-fs (md126): warning: mounting unchecked fs, running e2fsck is recommended [ 118.986683] EXT3-fs: barriers not enabled [ 118.998578] kjournald starting. Commit interval 5 seconds [ 119.041935] EXT3-fs (dm-46): using internal journal [ 119.047280] EXT3-fs (dm-46): mounted filesystem with ordered data mode [ 119.160317] EXT3-fs: barriers not enabled [ 119.178245] kjournald starting. Commit interval 5 seconds [ 119.178268] EXT3-fs (dm-51): warning: maximal mount count reached, running e2fsck is recommended [ 119.178693] EXT3-fs (dm-51): using internal journal [ 119.178696] EXT3-fs (dm-51): mounted filesystem with ordered data mode done. Activating swapfile swap...done. Cleaning up temporary files.... Setting kernel variables ...done. Configuring network interfaces...[ 120.122613] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX done. Cleaning up temporary files.... Setting console screen modes. Skipping font and keymap setup (handled by console-setup). Setting up console font and keymap...done. Setting sensors limits. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. [ 121.141667] calling xenfs_init+0x0/0x2e [xenfs] @ 2093 [ 121.147393] initcall xenfs_init+0x0/0x2e [xenfs] returned 0 after 2 usecs Starting enhanced syslogd: rsyslogd. [ 121.198754] calling evtchn_init+0x0/0x64 [xen_evtchn] @ 2111 [ 121.205142] Event-channel device installed. [ 121.209825] initcall evtchn_init+0x0/0x64 [xen_evtchn] returned 0 after 4639 usecs nut disabled, please adjust the configuration to your needs. Then set MODE to a suitable value in /etc/nut/nut.conf to enable it. Starting MD monitoring service: mdadm --monitor. Starting system message bus: dbus. Starting periodic command scheduler: cron. Starting NTP server: ntpd. [ 121.913816] sshd (2452): /proc/2452/oom_adj is deprecated, please use /proc/2452/oom_score_adj instead. Starting OpenBSD Secure Shell server: sshd. Starting MTA: exim4. Starting Xen daemons: xenfs xenstored xenconsoled xend[ 123.026883] XENBUS: Unable to read cpu state [ 123.031722] XENBUS: Unable to read cpu state [ 123.036625] XENBUS: Unable to read cpu state [ 123.041443] XENBUS: Unable to read cpu state [ 123.046289] XENBUS: Unable to read cpu state [ 123.051131] XENBUS: Unable to read cpu state [ 123.055977] XENBUS: Unable to read cpu state [ 123.060827] XENBUS: Unable to read cpu state [ 123.065687] XENBUS: Unable to read cpu state [ 123.070517] XENBUS: Unable to read cpu state [ 123.075373] XENBUS: Unable to read cpu state [ 123.080221] XENBUS: Unable to read cpu state [ 123.086761] calling br_init+0x0/0xb6 [bridge] @ 2491 [ 123.092353] Bridge firewalling registered [ 123.096863] initcall br_init+0x0/0xb6 [bridge] returned 0 after 4454 usecs [ 123.599475] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 126.262196] igb: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 126.271673] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 126.634696] device peth0 entered promiscuous mode [ 126.656545] eth0: port 1(peth0) entering forwarding state [ 126.662464] eth0: port 1(peth0) entering forwarding state . ERROR: Module e1000e does not exist in /proc/modules startpar: service(s) returned failure: rc.local ... failed! [ 136.325973] peth0: no IPv6 routers present [ 137.045886] eth0: no IPv6 routers present