|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [xen-unstable test] 6512: regressions - trouble: broken/fail/pass
flight 6512 xen-unstable real [real] http://www.chiark.greenend.org.uk/~xensrcts/logs/6512/ Regressions :-( Tests which did not succeed and are blocking: test-amd64-amd64-win 5 xen-boot fail REGR. vs. 6396 test-amd64-i386-rhel6hvm-intel 3 host-install(3) broken test-amd64-i386-win 14 guest-start.2 fail REGR. vs. 6396 test-amd64-i386-xl-multivcpu 5 xen-boot fail REGR. vs. 6396 test-amd64-i386-xl-win-vcpus1 5 xen-boot fail REGR. vs. 6396 test-amd64-xcpkern-i386-pair 3 host-install/src_host(3) broken test-amd64-xcpkern-i386-xl-credit2 11 guest-localmigrate fail REGR. vs. 6396 test-i386-i386-win 14 guest-start.2 fail REGR. vs. 6396 test-i386-xcpkern-i386-pair 3 host-install/src_host(3) broken Tests which did not succeed, but are not blocking, including regressions (tests previously passed) regarded as allowable: test-amd64-amd64-xl-win 13 guest-stop fail never pass test-amd64-i386-rhel6hvm-amd 8 guest-saverestore fail never pass test-amd64-i386-win-vcpus1 16 leak-check/check fail never pass test-amd64-i386-xl-credit2 10 guest-saverestore fail blocked in 6396 test-amd64-xcpkern-i386-rhel6hvm-amd 8 guest-saverestore fail never pass test-amd64-xcpkern-i386-rhel6hvm-intel 8 guest-saverestore fail never pass test-amd64-xcpkern-i386-win 16 leak-check/check fail never pass test-amd64-xcpkern-i386-xl-win 13 guest-stop fail never pass test-i386-i386-xl-win 13 guest-stop fail never pass test-i386-xcpkern-i386-win 16 leak-check/check fail never pass version targeted for testing: xen 3caed2112c65 baseline version: xen a8fee4ad3ad0 ------------------------------------------------------------ People who touched revisions under test: Gianni Tedesco <gianni.tedesco@xxxxxxxxxx> Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxxxx> Juergen Gross <juergen.gross@xxxxxxxxxxxxxx> Keir Fraser <keir@xxxxxxx> Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Tim Deegan <Tim.Deegan@xxxxxxxxxx> Wei Gang <gang.wei@xxxxxxxxx> ------------------------------------------------------------ jobs: build-i386-xcpkern pass build-amd64 pass build-i386 pass build-amd64-oldkern pass build-i386-oldkern pass build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl pass test-amd64-i386-xl pass test-i386-i386-xl pass test-amd64-xcpkern-i386-xl pass test-i386-xcpkern-i386-xl pass test-amd64-i386-rhel6hvm-amd fail test-amd64-xcpkern-i386-rhel6hvm-amd fail test-amd64-i386-xl-credit2 fail test-amd64-xcpkern-i386-xl-credit2 fail test-amd64-i386-rhel6hvm-intel broken test-amd64-xcpkern-i386-rhel6hvm-intel fail test-amd64-i386-xl-multivcpu fail test-amd64-xcpkern-i386-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-i386-i386-pair pass test-amd64-xcpkern-i386-pair broken test-i386-xcpkern-i386-pair broken test-amd64-amd64-pv pass test-amd64-i386-pv pass test-i386-i386-pv pass test-amd64-xcpkern-i386-pv pass test-i386-xcpkern-i386-pv pass test-amd64-i386-win-vcpus1 fail test-amd64-i386-xl-win-vcpus1 fail test-amd64-amd64-win fail test-amd64-i386-win fail test-i386-i386-win fail test-amd64-xcpkern-i386-win fail test-i386-xcpkern-i386-win fail test-amd64-amd64-xl-win fail test-i386-i386-xl-win fail test-amd64-xcpkern-i386-xl-win fail ------------------------------------------------------------ sg-report-flight on woking.cam.xci-test.com logs: /home/xc_osstest/logs images: /home/xc_osstest/images Logs, config files, etc. are available at http://www.chiark.greenend.org.uk/~xensrcts/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ changeset: 23043:3caed2112c65 tag: tip user: Juergen Gross <juergen.gross@xxxxxxxxxxxxxx> date: Tue Mar 15 10:14:27 2011 +0000 Avoid endless loop for vcpu migration. Only call SCHED_OP(pick_cpu) if a previously picked cpu is not suitable on the current iteration of the retry loop. Signed-off-by: Juergen Gross <juergen.gross@xxxxxxxxxxxxxx> Signed-off-by: Keir Fraser <keir@xxxxxxx> changeset: 23042:599ceb5b0a9b user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Tue Mar 15 10:02:36 2011 +0000 x86/HPET: fix oversight in 23033:84bacd800bf8 Clearly for the adjusted BUG_ON()s to not yield false positives num_chs_used must be incremented before setting up an IRQ (and decremented back when the setup failed). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23041:9f6dec0d25cd user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Mon Mar 14 17:20:11 2011 +0000 _csched_cpu_pick(): simplify sched_smt_power_savings dependent condition At least to me, using ?: instead of the (a && ...) || (!a && ...) construct is far easier to grok with a single look. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23040:77bb4be5c954 user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Mon Mar 14 17:19:47 2011 +0000 _csched_cpu_pick(): don't write idle bias more than once For the bias to be really meaningful, it should be updated only when the CPU selected will indeed be returned (and hence used for placing the vCPU in question). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23039:c40da47621d8 user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Mon Mar 14 17:19:22 2011 +0000 _csched_cpu_pick(): don't return CPUs outside vCPU's affinity mask This fixes a fairly blatant bug I introduced in c/s 20377:cff23354d026 - I wonder how this went unnoticed for so long. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23038:39f5947b1576 user: Gianni Tedesco <gianni.tedesco@xxxxxxxxxx> date: Mon Mar 14 17:13:15 2011 +0000 Allow tools to map arbitrarily large machphys_mfn_list on 32bit dom0 This permits suspend/resume to work with 32bit dom0/tools when system memory extends beyond 160GB (and up to 1TB). AFAICT the limit to MACH2PHYS_COMPAT_NR_ENTRIES is redundant since that refers to a limit in 32bit guest compat mappings under 64bit hypervisors, not userspace where there may be gigabytes of useful virtual space available for this. Suggested-by: Ian Campbell <Ian.Campbell@xxxxxxxxxxxxx> Signed-off-by: Gianni Tedesco <gianni.tedesco@xxxxxxxxxx> changeset: 23037:a29b35408950 user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Mon Mar 14 17:05:21 2011 +0000 x86: fix cpu_sibling_map initialization when topology CPUID leaf is present c/s 21811:12f0618400de broke this by not properly initializing struct cpuinfo_x86's x86_num_siblings member (other than Linux, where this is a global variable, it is being maintained per CPU by Xen). Hyper-threaded CPUs with CPUID leaf 0xb present had therefore all cpu_sibling_map-s with just a single bit set, thus improperly feeding the scheduler. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23036:9a15ff175e00 user: Wei Gang <gang.wei@xxxxxxxxx> date: Mon Mar 14 17:04:42 2011 +0000 x86: add volatile prefix for cpuid asm clauses cpuid results are possible to be changed now. For example, changing CR4.OSXSAVE bit or setting MSR XCR_XFEATURE_ENABLED_MASK may change XSAVE related cpuid leave return values. The volatile prefix is required to avoid the second cpuid calls following some possible changing operations being optimized in incorrect way by compiler. The sample bug is in xsave_init while debug=3Dn. The second call to cpuid_count() may be optimized and lead to a BUG_ON case while compare xsave_cntxt_size with ebx. Signed-off-by: Wei Gang <gang.wei@xxxxxxxxx> changeset: 23035:56dc6032b45f user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Mon Mar 14 17:02:50 2011 +0000 Force out-of-line instances of inline functions into .init.text in init-only code Some compiler versions may choose to not inline certain functions, but the check introduced in c/s 23003:768269c43914 wants .text to be empty. Also make sure an eventual error gets properly propagated even on the first section of an object (.text typically being the first one), and cover a broader set of sections. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23034:c79aae866ad8 user: Tim Deegan <Tim.Deegan@xxxxxxxxxx> date: Mon Mar 14 16:59:49 2011 +0000 x86_64: fix error checking in arch_set_info_guest() Cannot specify user mode execution without specifying user-mode pagetables. Signed-off-by: Tim Deegan <Tim.Deegan@xxxxxxxxxx> Acked-by: Keir Fraser <keir@xxxxxxx> changeset: 23033:84bacd800bf8 user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Sat Mar 12 13:20:51 2011 +0000 x86/HPET: adjust types 'unsigned int' is better suited as an array index on x86-64. 'u32' produces better code than 'unsigned long' on x86-64, so use the former for storing 32-bit values read from the hardware. this_cpu() uses an implicit smp_processor_id(), and hence using per_cpu() when the result of smp_processor_id() is already available is more efficient. Fold one case of cpu_isset()+cpu_clear() into cpu_test_and_clear(). Drop the unused return value of evt_do_broadcast(). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> Acked-by: Wei Gang <gang.wei@xxxxxxxxx> changeset: 23032:ac572e1df261 user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Sat Mar 12 13:20:11 2011 +0000 x86/HPET: use dynamic allocation for hpet_events[] Typically there are far less than 32 counters available, and hence there's no use in wasting the memory on (almost) every system. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> Acked-by: Wei Gang <gang.wei@xxxxxxxxx> changeset: 23031:5263151fba9b user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Sat Mar 12 13:19:34 2011 +0000 x86/HPET: cleanup - separate init and resume code paths (so that the [larger] init parts can go init .init.* sections) - drop the separate legacy_hpet_event object, as we can easily re-use the first slot of hpet_events[] for that purpose (the whole array is otherwise unused when the legacy code is being used) - use section placement attributes where reasonable Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> Acked-by: Wei Gang <gang.wei@xxxxxxxxx> changeset: 23030:87aa1277eae0 user: Jan Beulich <jbeulich@xxxxxxxxxx> date: Sat Mar 12 13:19:02 2011 +0000 x86/HPET: fix initialization order At least the legacy path can enter its interrupt handler callout while initialization is still in progress - that handler checks whether ->event_handler is non-NULL, and hence all other initialization must happen before setting this field. Do the same to the MSI initialization just in case (and to keep the code in sync). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx> changeset: 23029:a8fee4ad3ad0 user: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> date: Fri Mar 11 18:22:23 2011 +0000 libxl: do not try to use blktap with qdisk libxl_device_disk_add tries to use blktap when available even for qdisk devices, this patch fixes it. Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Committed-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> (qemu changes not included) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |