Re: [Xen-devel] PV hybrid: vmlaunch failure help...

[Keir Fraser <keir.xen@xxxxxxxxx>]

On 04/03/2011 03:21, "Mukesh Rathor" <mukesh.rathor@xxxxxxxxxx> wrote:

> Hi all,
> 
> I'm trying to see if I can run PV guest in a very lightweight HVM
> container. I've done some basic prototype to intercept PV guest creation
> and try to start it in vmx container. But the vmlaunch fails with the
> generic code, exit reason 0x80000021, guest state invalid. I've been trying
> to debug it for many days now and to no avail.
> 
> It's unfortunate that there's no flow diagram or more specific error codes
> to point to the field in problem in case vmlaunch fails.

I was going to look into this feature myself, it's good someone else has
picked it up so I don't have to. :-)

For this particular vmentry failure, Vol.3B Section 23.3.1 lists all the
guest-state checks carried out on vmentry. There are quite a few of them,
but you simply need to check your state dump against every check until you
find a mismatch. I believe someone had a function that implemented all/most
of these checks in a diagnostic helper function -- I can't find the patch
just now unfortunately.

 -- Keir

> I'm trying to enter vmx in IA32-e mode. I've got PG/PE/PAE all set to 1.
> Ive the CS.L set to 1. I'm not loading EFER MSR as according to the
> Intel Manual, Vol 3, section 23.3.2, the LME/LMA are automatically set
> if entering in the IA32-e mode. Is this correct?
> 
> I experimented with setting GDTR or leaving base to NULL, didn't help. If
> I'm loading the CS fields, do I still need to set the GDTR? How about TR,
> IDTR and LDTR, do they need to be set for entry? I've been playing
> around setting/unsetting them, but keep getting the stupid invalid
> guest state error no matter what. Oh yes, I'm on westmere.
> 
> Will appreciate any help.
> 
> thanks a lot,
> Mukesh
> 
> 
> *** Guest State ***
> CR0: actual=0x0000000080010039, shadow=0x0000000080010039,
> gh_mask=ffffffffffffffff
> CR4: actual=0x0000000000002060, shadow=0x0000000000002060,
> gh_mask=ffffffffffffffff
> CR3: actual=0x00000001047ca000, target_count=0
>      target0=0000000000000000, target1=0000000000000000
>      target2=0000000000000000, target3=0000000000000000
> RSP = 0xffffffff82c97000 (0xffffffff82c97000)  RIP = 0xffffffff81b13200
> (0xffffffff81b13200)
> RFLAGS=0x0000000000000002 (0x0000000000000002)  DR7 = 0x0000000000000000
> Sysenter RSP=0000000000000000 CS:RIP=0000:0000000000000000
> (XEN) CS: sel=0x0010, attr=0x0a09b, limit=0xffffffff, base=0x0000000000000000
> (XEN) DS: sel=0x0018, attr=0x0c093, limit=0xffffffff, base=0x0000000000000000
> (XEN) SS: sel=0x0018, attr=0x0c093, limit=0xffffffff, base=0x0000000000000000
> (XEN) ES: sel=0x0000, attr=0x00000, limit=0xffffffff, base=0x0000000000000000
> (XEN) FS: sel=0x0000, attr=0x00000, limit=0xffffffff, base=0x0000000000000000
> (XEN) GS: sel=0x0000, attr=0x00000, limit=0xffffffff, base=0x0000000000000000
> (XEN) GDTR:                           limit=0xffffffff,
> base=0xffffffff81a4c490
> (XEN) LDTR: sel=0x0000, attr=0x00082, limit=0x00000000,
> base=0x0000000000000000
> (XEN) IDTR:                           limit=0x00000000,
> base=0x0000000000000000
> (XEN) TR: sel=0x0000, attr=0x0008b, limit=0x000000ff, base=0x0000000000000000
> Guest EFER = 0x0000000000000000
> Guest PAT = 0x0000000000000000
> TSC Offset = ffffffb472a10c04
> DebugCtl=0000000000000000 DebugExceptions=0000000000000000
> Interruptibility=0000 ActivityState=0000
> MSRs: entry_load:0 exit_load:0 exit_store:0
> 
> *** Host State ***
> RSP = 0xffff82c48049ffa0  RIP = 0xffff82c4801b4710
> CS=e008 DS=0000 ES=0000 FS=0000 GS=0000 SS=0000 TR=e040
> FSBase=0000000000000000 GSBase=0000000000000000 TRBase=ffff82c480292a80
> GDTBase=ffff82c4800f3000 IDTBase=ffff82c4804de1e0
> CR0=000000008005003b CR3=00000001047ca000 CR4=00000000000026f0
> Sysenter RSP=ffff82c48049ffd0 CS:RIP=e008:ffff82c4801ee2f0
> Host PAT = 0x0000000000000000
> 
> *** Control State ***
> PinBased=0000001f CPUBased=2481e7fa SecondaryExec=00000020
> EntryControls=000013fb ExitControls=0003efff
> ExceptionBitmap=000440c0
> VMEntry: intr_info=00000000 errcode=00000000 ilen=00000000
> VMExit: intr_info=00000000 errcode=00000000 ilen=00000000
>         reason=80000021 qualification=00000000
> IDTVectoring: info=00000000 errcode=00000000
> TPR Threshold = 0x00
> EPT pointer = 0x0000000000000000
> Virtual processor ID = 0x0001
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel