Xen project Mailing List

[Xen-devel] Re: ATA driver failures with pvops dom0, (was: aic79xx failures with pvops dom0 2.6.32.25)

To: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>

From: micah anderson <micah@xxxxxxxxxx>

Date: Mon, 22 Nov 2010 18:01:08 -0500

Delivery-date: Tue, 23 Nov 2010 03:21:38 -0800

List-id: Xen developer discussion <xen-devel.lists.xensource.com>

On Mon, 22 Nov 2010 16:55:35 -0500, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote: > On Mon, Nov 22, 2010 at 04:46:46PM -0500, micah anderson wrote: > > On Mon, 22 Nov 2010 11:28:29 -0500, Konrad Rzeszutek Wilk > > <konrad.wilk@xxxxxxxxxx> wrote: > > > > [ 16.572048] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 > > > > [ 16.572051] <Adaptec AIC7902 Ultra320 SCSI adapter> > > > > [ 16.572053] aic7902: Ultra320 Wide Channel A, SCSI Id=7, > > > > PCI-X 101-133MHz, 512 SCBs > > > > [ 16.572598] aic79xx 0000:03:02.1: found PCI INT B -> IRQ 5 > > > > > > That is a rather odd IRQ number that is shared amongst all of the > > > devices. Is there > > > a "OS Compatibility" BIOS option where you can select Linux? > > > > I'm intending to have the BIOS queried at the earliest convenient > > time. Its not near me so I can't get this information right away, but I > > will. > > Take your time. I've a full plate of bugs to deal with :-( It will happen this week for sure, sorry to put more on your plate :o > > > So MA Young found an interesting issue where the IRQs below 16 don't get > > > programmed > > > correctly, which was fixed in .. some unstable version, but before we go > > > that route > > > 1) Go in the serial console and hit Ctrl-A, hit '?' and hit '*' and send > > > the > > > output. I am curious to see if the IO-APIC ends up having a proper vector > > > as during > > > bootup it looks to be set to nothing but it should have by now have a > > > good value. > > > > Ok, here it is: > .. snip .. > > (XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:38 > > type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 5(-S--), > > So it thinks it is an edge, but if that IRQ is shared it has to be level. You > have > a really weird motherboard.. Thats odd, the motherboard isn't really all that weird, its a supermicro board, this one: http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DPR-8G2_.cfm > One more thing - can you boot the kernel as baremetal (so, no Xen) and "cat > /proc/interrupts" > and also attach the full serial bootup log? I am curious to see how the irq 5 > is setup. > It should show up as level. Well, if I boot the 2.6.32.25 kernel I built for the dom0, without Xen, with the debug options I've been using (linux /vmlinuz-2.6.32.25 root=/dev/mapper/quelea0-root ro lapic=debug apic_verbosity=debug apic=debug loglvl=all console=tty0 console=ttyS0,115200n8 nomodeset initcall_debug debug loglevel=10) I interestingly am not able to see the first prompt for the disk encryption passphrase. I thought it was hung, so I kept trying to eliminate kernel boot params to find it, but then realized after about the 5th reboot that I was able to actually enter my passphrase blindly and it continued to boot... so I put all the debug parameters back and booted it... Interestingly, I do not see IRQ 5 here: quelea:~# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 134 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT cascade 4: 280 0 0 0 IO-APIC-edge serial 6: 3 0 0 0 IO-APIC-edge floppy 8: 0 0 0 0 IO-APIC-edge rtc0 14: 0 0 0 0 IO-APIC-edge ide0 15: 95 0 0 0 IO-APIC-edge ide1 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb1 18: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 28: 15 0 0 0 IO-APIC-fasteoi aic79xx 29: 15 0 0 0 IO-APIC-fasteoi aic79xx 48: 2830 0 0 0 IO-APIC-fasteoi sata_mv 54: 769 0 0 0 IO-APIC-fasteoi eth0 55: 107 0 0 0 IO-APIC-fasteoi eth1 NMI: 0 0 0 0 Non-maskable interrupts LOC: 67561 68043 68020 68057 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 0 0 0 0 Performance monitoring interrupts PND: 0 0 0 0 Performance pending work RES: 1859 2434 2471 3307 Rescheduling interrupts CAL: 52 1811 61 76 Function call interrupts TLB: 121 104 355 269 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 1 1 1 1 Machine check polls ERR: 0 MIS: 0 Here is the baremetal, no Xen bootup: Loading Linux 2.6.32.25 ... Loading initial ramdisk ... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.25 (root@quelea) (gcc version 4.4.5 (Debian 4.4.5-6) ) #6 SMP Sat Nov 20 09:14:48 PST 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000f7ef9000 (usable) [ 0.000000] BIOS-e820: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000f7f00000 - 00000000f7f80000 (usable) [ 0.000000] BIOS-e820: 00000000f7f80000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000208000000 (usable) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x208000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0F8000000 mask FF8000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 200000000 mask FF8000000 write-back [ 0.000000] 3 base 0F7F80000 mask FFFF80000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000f7f80000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037600000 page 2M [ 0.000000] 0037600000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000 [ 0.000000] RAMDISK: 37611000 - 37fefaba [ 0.000000] Allocated new RAMDISK: 00100000 - 00adeaba [ 0.000000] Move RAMDISK from 0000000037611000 - 0000000037fefab9 to 00100000 - 00adeab9 [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) [ 0.000000] 7432MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00014000 - 0001af00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014fb8b4] TEXT DATA BSS ==> [0001000000 - 00014fb8b4] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00014fc000 - 0001509114] BRK ==> [00014fc000 - 0001509114] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000100000 - 0000adeaba] NEW RAMDISK ==> [0000100000 - 0000adeaba] [ 0.000000] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000] [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0 [ 0.000000] mpc: 9fda0-9ff2c [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00208000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000f7ef9 [ 0.000000] 0: 0x000f7f00 -> 0x000f7f80 [ 0.000000] 0: 0x00100000 -> 0x00208000 [ 0.000000] On node 0 totalpages: 2096904 [ 0.000000] free_area_init_node: node 0, pgdat c13d5b00, node_mem_map c150b200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 14865 pages used for memmap [ 0.000000] HighMem zone: 1854826 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: 9fda0-9ff2c [ 0.000000] MPTABLE: OEM ID: [ 0.000000] MPTABLE: Product ID: Kings Canyon [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #6 [ 0.000000] Processor #1 [ 0.000000] Processor #7 [ 0.000000] Bus #0 is PCI [ 0.000000] Bus #1 is PCI [ 0.000000] Bus #2 is PCI [ 0.000000] Bus #3 is PCI [ 0.000000] Bus #4 is PCI [ 0.000000] Bus #5 is ISA [ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000. [ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000. [ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400. [ 0.000000] Int: type 3, pol 1, trig 1, bus 05, IRQ 00, APIC ID 2, APIC INT 00 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 75, APIC ID 2, APIC INT 13 [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 74, APIC ID 2, APIC INT 10 [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 1, trig 1, bus 05, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 76, APIC ID 2, APIC INT 12 [ 0.000000] Int: type 0, pol 3, trig 3, bus 02, IRQ 04, APIC ID 4, APIC INT 00 [ 0.000000] Int: type 0, pol 3, trig 3, bus 02, IRQ 0c, APIC ID 4, APIC INT 06 [ 0.000000] Int: type 0, pol 3, trig 3, bus 02, IRQ 0d, APIC ID 4, APIC INT 07 [ 0.000000] Int: type 0, pol 3, trig 3, bus 03, IRQ 08, APIC ID 3, APIC INT 04 [ 0.000000] Int: type 0, pol 3, trig 3, bus 03, IRQ 09, APIC ID 3, APIC INT 05 [ 0.000000] Int: type 0, pol 3, trig 3, bus 04, IRQ 04, APIC ID 2, APIC INT 10 [ 0.000000] Lint: type 3, pol 1, trig 1, bus 05, IRQ 00, APIC ID ff, APIC LINT 00 [ 0.000000] Lint: type 1, pol 1, trig 1, bus 05, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] mapped IOAPIC to ffff9000 (fec80000) [ 0.000000] mapped IOAPIC to ffff8000 (fec80400) [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at f8000000 (gap: f8000000:6c00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c5800000 s37656 r0 d23784 u524288 [ 0.000000] pcpu-alloc: s37656 r0 d23784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2080263 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32.25 root=/dev/mapper/quelea0-root ro lapic=debug apic_verbosity=debug apic=debug loglvl=all console=tty0 console=ttyS0,115200n8 nomodeset initcall_debug debug loglevel=10 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:00208000) [ 0.000000] Memory: 8303444k/8519680k available (2588k kernel code, 82964k reserved, 1377k data, 396k init, 7478764k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB) [ 0.000000] .data : 0xc12870a5 - 0xc13df898 (1377 kB) [ 0.000000] .text : 0xc1000000 - 0xc12870a5 (2588 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1536 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3199.252 MHz processor. [ 0.012007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6398.50 BogoMIPS (lpj=12797008) [ 0.020020] Security Framework initialized [ 0.024010] SELinux: Disabled at boot. [ 0.028011] Mount-cache hash table entries: 512 [ 0.032184] Initializing cgroup subsys ns [ 0.036007] Initializing cgroup subsys cpuacct [ 0.040007] Initializing cgroup subsys devices [ 0.044005] Initializing cgroup subsys freezer [ 0.048004] Initializing cgroup subsys net_cls [ 0.052033] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.060004] CPU: L2 cache: 512K [ 0.063187] CPU: L3 cache: 1024K [ 0.064004] CPU: Physical Processor ID: 0 [ 0.068003] CPU: Processor Core ID: 0 [ 0.072007] mce: CPU supports 4 MCE banks [ 0.076013] CPU0: Thermal monitoring enabled (TM1) [ 0.080018] Performance Events: no PMU driver, software events only. [ 0.088008] Checking 'hlt' instruction... OK. [ 0.110006] Enabling APIC mode: Flat. Using 3 I/O APICs [ 0.112006] Getting VERSION: 50014 [ 0.116004] Getting VERSION: 50014 [ 0.120004] Getting ID: 0 [ 0.124004] Getting ID: 0 [ 0.126677] enabled ExtINT on CPU#0 [ 0.128126] ExtINT not setup in hardware but reported by MP table [ 0.132166] ENABLING IO-APIC IRQs [ 0.136004] init IO_APIC IRQs [ 0.140005] 2-0 (apicid-pin) not connected [ 0.144007] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.148007] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.152007] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.156006] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.160006] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.164006] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.168006] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.172006] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.176006] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0) [ 0.180004] 2-10 2-11 (apicid-pin) not connected [ 0.187078] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.188006] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.192006] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.196006] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.200007] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) [ 0.204004] 2-17 (apicid-pin) not connected [ 0.208005] IOAPIC[0]: Set routing entry (2-18 -> 0x51 -> IRQ 18 Mode:1 Active:1) [ 0.212006] IOAPIC[0]: Set routing entry (2-19 -> 0x59 -> IRQ 19 Mode:1 Active:1) [ 0.216004] 2-20 2-21 2-22 2-23 3-0 3-1 3-2 3-3 (apicid-pin) not connected [ 0.224003] 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 (apicid-pin) not connected [ 0.236003] 4-1 4-2 4-3 4-4 4-5 (apicid-pin) not connected [ 0.242583] 4-8 4-9 4-10 4-11 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 (apicid-pin) not connected [ 0.252219] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.296200] CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 [ 0.301279] Using local APIC timer interrupts. [ 0.301280] calibrating APIC timer ... [ 0.308001] ... lapic delta = 833142 [ 0.308001] ... PM-Timer delta = 0 [ 0.308001] ..... delta 833142 [ 0.308001] ..... mult: 35780940 [ 0.308001] ..... calibration result: 533210 [ 0.308001] ..... CPU clock speed is 3199.1061 MHz. [ 0.308001] ..... host bus clock speed is 133.1210 MHz. [ 0.308001] ... verify APIC timer [ 0.419314] ... jiffies delta = 25 [ 0.420003] ... jiffies result ok [ 0.424021] calling migration_init+0x0/0x43 @ 1 [ 0.428041] initcall migration_init+0x0/0x43 returned 0 after 0 usecs [ 0.432005] calling spawn_ksoftirqd+0x0/0x43 @ 1 [ 0.436023] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 0 usecs [ 0.440008] calling init_call_single_data+0x0/0x62 @ 1 [ 0.444009] initcall init_call_single_data+0x0/0x62 returned 0 after 0 usecs [ 0.448006] calling spawn_softlockup_task+0x0/0x5b @ 1 [ 0.452022] initcall spawn_softlockup_task+0x0/0x5b returned 0 after 0 usecs [ 0.456005] calling relay_init+0x0/0xd @ 1 [ 0.460011] initcall relay_init+0x0/0xd returned 0 after 0 usecs [ 0.464007] calling tracer_alloc_buffers+0x0/0x12b @ 1 [ 0.468141] initcall tracer_alloc_buffers+0x0/0x12b returned 0 after 0 usecs [ 0.472005] calling init_trace_printk+0x0/0xa @ 1 [ 0.476006] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs [ 0.480088] Booting processor 1 APIC 0x6 ip 0x6000 [ 0.016000] Initializing CPU#1 [ 0.016000] masked ExtINT on CPU#1 [ 0.016000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.016000] CPU: L2 cache: 512K [ 0.016000] CPU: L3 cache: 1024K [ 0.016000] CPU: Physical Processor ID: 3 [ 0.016000] CPU: Processor Core ID: 0 [ 0.016000] CPU1: Thermal monitoring enabled (TM1) [ 0.576081] CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 [ 0.584010] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.588250] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.016000] Initializing CPU#2 [ 0.016000] masked ExtINT on CPU#2 [ 0.016000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.016000] CPU: L2 cache: 512K [ 0.016000] CPU: L3 cache: 1024K [ 0.016000] CPU: Physical Processor ID: 0 [ 0.016000] CPU: Processor Core ID: 0 [ 0.016000] CPU2: Thermal monitoring handled by SMI [ 0.680059] CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 [ 0.688014] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.692266] Booting processor 3 APIC 0x7 ip 0x6000 [ 0.016000] Initializing CPU#3 [ 0.016000] masked ExtINT on CPU#3 [ 0.016000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.016000] CPU: L2 cache: 512K [ 0.016000] CPU: L3 cache: 1024K [ 0.016000] CPU: Physical Processor ID: 3 [ 0.016000] CPU: Processor Core ID: 0 [ 0.016000] CPU3: Thermal monitoring handled by SMI [ 0.784091] CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 [ 0.792014] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.796119] Brought up 4 CPUs [ 0.800006] Total of 4 processors activated (25594.46 BogoMIPS). [ 0.805055] CPU0 attaching sched-domain: [ 0.808009] domain 0: span 0,2 level SIBLING [ 0.812004] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 0.819721] domain 1: span 0,2 level MC [ 0.821714] groups: 0,2 (cpu_power = 1178) [ 0.828241] domain 2: span 0-3 level CPU [ 0.832004] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.838349] CPU1 attaching sched-domain: [ 0.840006] domain 0: span 1,3 level SIBLING [ 0.848004] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 0.853862] domain 1: span 1,3 level MC [ 0.857713] groups: 1,3 (cpu_power = 1178) [ 0.862355] domain 2: span 0-3 level CPU [ 0.865808] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.872242] CPU2 attaching sched-domain: [ 0.876005] domain 0: span 0,2 level SIBLING [ 0.882149] groups: 2 (cpu_power = 589) 0 (cpu_power = 588) [ 0.888243] domain 1: span 0,2 level MC [ 0.892004] groups: 0,2 (cpu_power = 1177) [ 0.896244] domain 2: span 0-3 level CPU [ 0.900004] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.908006] CPU3 attaching sched-domain: [ 0.912005] domain 0: span 1,3 level SIBLING [ 0.916004] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 0.922096] domain 1: span 1,3 level MC [ 0.925714] groups: 1,3 (cpu_power = 1178) [ 0.930355] domain 2: span 0-3 level CPU [ 0.933810] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1177) [ 0.942561] devtmpfs: initialized [ 0.944232] calling init_mmap_min_addr+0x0/0xd @ 1 [ 0.948008] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs [ 0.952008] calling init_cpufreq_transition_notifier_list+0x0/0x14 @ 1 [ 0.956009] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned 0 after 0 usecs [ 0.960007] calling net_ns_init+0x0/0xc9 @ 1 [ 0.964018] initcall net_ns_init+0x0/0xc9 returned 0 after 0 usecs [ 0.968010] calling e820_mark_nvs_memory+0x0/0x2d @ 1 [ 0.972009] initcall e820_mark_nvs_memory+0x0/0x2d returned 0 after 0 usecs [ 0.976007] calling cpufreq_tsc+0x0/0x21 @ 1 [ 0.980007] initcall cpufreq_tsc+0x0/0x21 returned 0 after 0 usecs [ 0.984007] calling pci_reboot_init+0x0/0xd @ 1 [ 0.988009] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs [ 0.992006] calling reboot_init+0x0/0xd @ 1 [ 0.996016] initcall reboot_init+0x0/0xd returned 0 after 0 usecs [ 1.000007] calling init_lapic_sysfs+0x0/0x24 @ 1 [ 1.004017] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs [ 1.008010] calling alloc_frozen_cpus+0x0/0x3 @ 1 [ 1.012007] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs [ 1.016007] calling sysctl_init+0x0/0x25 @ 1 [ 1.020201] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs [ 1.024006] calling ksysfs_init+0x0/0x92 @ 1 [ 1.028014] initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs [ 1.032006] calling async_init+0x0/0x4a @ 1 [ 1.036013] initcall async_init+0x0/0x4a returned 0 after 0 usecs [ 1.040007] calling init_jiffies_clocksource+0x0/0xa @ 1 [ 1.044009] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0 usecs [ 1.048007] calling pm_init+0x0/0x4b @ 1 [ 1.052016] initcall pm_init+0x0/0x4b returned 0 after 0 usecs [ 1.056007] calling pm_disk_init+0x0/0xf @ 1 [ 1.060010] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs [ 1.064008] calling swsusp_header_init+0x0/0x22 @ 1 [ 1.068008] initcall swsusp_header_init+0x0/0x22 returned 0 after 0 usecs [ 1.072008] calling init_zero_pfn+0x0/0x10 @ 1 [ 1.076007] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs [ 1.080006] calling filelock_init+0x0/0x25 @ 1 [ 1.084008] initcall filelock_init+0x0/0x25 returned 0 after 0 usecs [ 1.088006] calling init_script_binfmt+0x0/0xc @ 1 [ 1.092007] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs [ 1.096006] calling init_elf_binfmt+0x0/0xc @ 1 [ 1.100007] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs [ 1.104006] calling debugfs_init+0x0/0x46 @ 1 [ 1.108011] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs [ 1.112007] calling securityfs_init+0x0/0x3d @ 1 [ 1.116009] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs [ 1.120007] calling random32_init+0x0/0xa4 @ 1 [ 1.124009] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs [ 1.128010] calling virtio_init+0x0/0x1b @ 1 [ 1.132018] initcall virtio_init+0x0/0x1b returned 0 after 0 usecs [ 1.136009] calling __gnttab_init+0x0/0x1b @ 1 [ 1.140007] initcall __gnttab_init+0x0/0x1b returned -19 after 0 usecs [ 1.144006] calling regulator_init+0x0/0x20 @ 1 [ 1.148005] regulator: core version 0.5 [ 1.152012] initcall regulator_init+0x0/0x20 returned 0 after 3906 usecs [ 1.156007] calling cpufreq_core_init+0x0/0x75 @ 1 [ 1.160010] initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 usecs [ 1.164007] calling cpuidle_init+0x0/0x2e @ 1 [ 1.168010] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs [ 1.172007] calling sock_init+0x0/0x4f @ 1 [ 1.176050] initcall sock_init+0x0/0x4f returned 0 after 0 usecs [ 1.180007] calling net_inuse_init+0x0/0x1b @ 1 [ 1.184010] initcall net_inuse_init+0x0/0x1b returned 0 after 0 usecs [ 1.188007] calling netpoll_init+0x0/0x2b @ 1 [ 1.192007] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs [ 1.196007] calling netlink_proto_init+0x0/0xf8 @ 1 [ 1.200010] NET: Registered protocol family 16 [ 1.204018] initcall netlink_proto_init+0x0/0xf8 returned 0 after 3906 usecs [ 1.208008] calling bdi_class_init+0x0/0x31 @ 1 [ 1.212024] initcall bdi_class_init+0x0/0x31 returned 0 after 0 usecs [ 1.216007] calling kobject_uevent_init+0x0/0x49 @ 1 [ 1.220009] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs [ 1.224007] calling pcibus_class_init+0x0/0xf @ 1 [ 1.228015] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs [ 1.232007] calling pci_driver_init+0x0/0xa @ 1 [ 1.236019] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs [ 1.240008] calling backlight_class_init+0x0/0x48 @ 1 [ 1.244014] initcall backlight_class_init+0x0/0x48 returned 0 after 0 usecs [ 1.248007] calling xenbus_init+0x0/0x260 @ 1 [ 1.252009] initcall xenbus_init+0x0/0x260 returned -19 after 0 usecs [ 1.256006] calling tty_class_init+0x0/0x2b @ 1 [ 1.260013] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs [ 1.264007] calling vtconsole_class_init+0x0/0x9b @ 1 [ 1.268032] initcall vtconsole_class_init+0x0/0x9b returned 0 after 0 usecs [ 1.272007] calling spi_init+0x0/0x8c @ 1 [ 1.276026] initcall spi_init+0x0/0x8c returned 0 after 0 usecs [ 1.280007] calling lguest_devices_init+0x0/0x160 @ 1 [ 1.284008] initcall lguest_devices_init+0x0/0x160 returned 0 after 0 usecs [ 1.288007] calling amd_postcore_init+0x0/0x62 @ 1 [ 1.292007] initcall amd_postcore_init+0x0/0x62 returned 0 after 0 usecs [ 1.296008] calling arch_kdebugfs_init+0x0/0x1a @ 1 [ 1.300011] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs [ 1.304008] calling init_pit_clocksource+0x0/0xa3 @ 1 [ 1.308008] initcall init_pit_clocksource+0x0/0xa3 returned 0 after 0 usecs [ 1.312008] calling mtrr_if_init+0x0/0x40 @ 1 [ 1.316015] initcall mtrr_if_init+0x0/0x40 returned 0 after 0 usecs [ 1.320007] calling ffh_cstate_init+0x0/0x23 @ 1 [ 1.324009] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs [ 1.328007] calling acpi_pci_init+0x0/0x4d @ 1 [ 1.332008] initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs [ 1.336008] calling xen_pcpu_init+0x0/0x8e @ 1 [ 1.340008] initcall xen_pcpu_init+0x0/0x8e returned 0 after 0 usecs [ 1.344007] calling register_xen_pci_notifier+0x0/0x1b @ 1 [ 1.348007] initcall register_xen_pci_notifier+0x0/0x1b returned 0 after 0 usecs [ 1.352007] calling setup_vcpu_hotplug_event+0x0/0x1b @ 1 [ 1.356007] initcall setup_vcpu_hotplug_event+0x0/0x1b returned -19 after 0 usecs [ 1.360007] calling dmi_id_init+0x0/0x288 @ 1 [ 1.364048] initcall dmi_id_init+0x0/0x288 returned 0 after 0 usecs [ 1.368008] calling dma_bus_init+0x0/0x2d @ 1 [ 1.372014] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs [ 1.376007] calling dma_channel_table_init+0x0/0xc9 @ 1 [ 1.380015] initcall dma_channel_table_init+0x0/0xc9 returned 0 after 0 usecs [ 1.384007] calling pci_arch_init+0x0/0x56 @ 1 [ 1.389638] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4 [ 1.392006] PCI: Using configuration type 1 for base access [ 1.396018] initcall pci_arch_init+0x0/0x56 returned 0 after 7812 usecs [ 1.400007] calling topology_init+0x0/0x32 @ 1 [ 1.404035] initcall topology_init+0x0/0x32 returned 0 after 0 usecs [ 1.408007] calling mtrr_init_finialize+0x0/0x31 @ 1 [ 1.412008] initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs [ 1.416007] calling param_sysfs_init+0x0/0x1ea @ 1 [ 1.420418] initcall param_sysfs_init+0x0/0x1ea returned 0 after 0 usecs [ 1.424008] calling pm_sysrq_init+0x0/0x12 @ 1 [ 1.428008] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs [ 1.432007] calling audit_watch_init+0x0/0x23 @ 1 [ 1.436008] initcall audit_watch_init+0x0/0x23 returned 0 after 0 usecs [ 1.440009] calling init_slow_work+0x0/0x2b @ 1 [ 1.444007] initcall init_slow_work+0x0/0x2b returned 0 after 0 usecs [ 1.448007] calling default_bdi_init+0x0/0x92 @ 1 [ 1.452036] initcall default_bdi_init+0x0/0x92 returned 0 after 0 usecs [ 1.456008] calling init_bio+0x0/0xa7 @ 1 [ 1.460026] bio: create slab <bio-0> at 0 [ 1.464014] initcall init_bio+0x0/0xa7 returned 0 after 3906 usecs [ 1.468008] calling fsnotify_init+0x0/0xa @ 1 [ 1.472009] initcall fsnotify_init+0x0/0xa returned 0 after 0 usecs [ 1.476007] calling fsnotify_notification_init+0x0/0xdc @ 1 [ 1.480010] initcall fsnotify_notification_init+0x0/0xdc returned 0 after 0 usecs [ 1.484007] calling cryptomgr_init+0x0/0xa @ 1 [ 1.488008] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs [ 1.492007] calling blk_settings_init+0x0/0x19 @ 1 [ 1.496007] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs [ 1.500007] calling blk_ioc_init+0x0/0x22 @ 1 [ 1.504008] initcall blk_ioc_init+0x0/0x22 returned 0 after 0 usecs [ 1.508009] calling blk_softirq_init+0x0/0x50 @ 1 [ 1.512008] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs [ 1.516007] calling blk_iopoll_setup+0x0/0x50 @ 1 [ 1.520008] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs [ 1.524007] calling genhd_device_init+0x0/0x5d @ 1 [ 1.528021] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs [ 1.532008] calling blk_dev_integrity_init+0x0/0x22 @ 1 [ 1.536009] initcall blk_dev_integrity_init+0x0/0x22 returned 0 after 0 usecs [ 1.540009] calling pci_slot_init+0x0/0x37 @ 1 [ 1.544012] initcall pci_slot_init+0x0/0x37 returned 0 after 0 usecs [ 1.548008] calling fbmem_init+0x0/0x7c @ 1 [ 1.552019] initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs [ 1.556009] calling acpi_init+0x0/0x2cf @ 1 [ 1.560006] ACPI: Interpreter disabled. [ 1.564008] initcall acpi_init+0x0/0x2cf returned -19 after 3906 usecs [ 1.568007] calling dock_init+0x0/0x79 @ 1 [ 1.572008] initcall dock_init+0x0/0x79 returned 0 after 0 usecs [ 1.576007] calling acpi_pci_root_init+0x0/0x21 @ 1 [ 1.580008] initcall acpi_pci_root_init+0x0/0x21 returned 0 after 0 usecs [ 1.584008] calling acpi_pci_link_init+0x0/0x3b @ 1 [ 1.588008] initcall acpi_pci_link_init+0x0/0x3b returned 0 after 0 usecs [ 1.592008] calling pnp_init+0x0/0xa @ 1 [ 1.596019] initcall pnp_init+0x0/0xa returned 0 after 0 usecs [ 1.600008] calling __setup_shutdown_event+0x0/0x1b @ 1 [ 1.604008] initcall __setup_shutdown_event+0x0/0x1b returned -19 after 0 usecs [ 1.608007] calling xenbus_probe_backend_init+0x0/0x1f @ 1 [ 1.612019] initcall xenbus_probe_backend_init+0x0/0x1f returned 0 after 0 usecs [ 1.616008] calling xenbus_probe_frontend_init+0x0/0x1f @ 1 [ 1.620019] initcall xenbus_probe_frontend_init+0x0/0x1f returned 0 after 0 usecs [ 1.624008] calling balloon_init+0x0/0x22f @ 1 [ 1.628008] initcall balloon_init+0x0/0x22f returned -19 after 0 usecs [ 1.632007] calling misc_init+0x0/0x95 @ 1 [ 1.636019] initcall misc_init+0x0/0x95 returned 0 after 0 usecs [ 1.640008] calling vga_arb_device_init+0x0/0x62 @ 1 [ 1.644034] vgaarb: loaded [ 1.648008] initcall vga_arb_device_init+0x0/0x62 returned 0 after 3906 usecs [ 1.652008] calling serio_init+0x0/0x6c @ 1 [ 1.656025] initcall serio_init+0x0/0x6c returned 0 after 0 usecs [ 1.660008] calling input_init+0x0/0x108 @ 1 [ 1.664020] initcall input_init+0x0/0x108 returned 0 after 0 usecs [ 1.668008] calling rtc_init+0x0/0x59 @ 1 [ 1.672016] initcall rtc_init+0x0/0x59 returned 0 after 0 usecs [ 1.676008] calling power_supply_class_init+0x0/0x2b @ 1 [ 1.680015] initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs [ 1.684008] calling hwmon_init+0x0/0xe7 @ 1 [ 1.688015] initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs [ 1.692008] calling pci_subsys_init+0x0/0xdc @ 1 [ 1.696006] PCI: Probing PCI hardware [ 1.700007] PCI: Probing PCI hardware (bus 00) [ 1.704201] pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f] [ 1.708062] pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f] [ 1.712062] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f] [ 1.716115] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 1.720009] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 1.724030] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 1.728012] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 1.732012] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 1.736012] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 1.740012] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f] [ 1.744012] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 1.748060] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f] [ 1.752089] pci 0000:01:1c.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff] [ 1.756134] pci 0000:01:1e.0: reg 10 32bit mmio: [0xfc101000-0xfc101fff] [ 1.760112] pci 0000:00:02.0: bridge io port: [0x3000-0x4fff] [ 1.764010] pci 0000:00:02.0: bridge 32bit mmio: [0xfc100000-0xfc8fffff] [ 1.768069] pci 0000:02:01.0: reg 10 64bit mmio: [0xfc200000-0xfc2fffff] [ 1.772013] pci 0000:02:01.0: reg 18 io port: [0x3000-0x30ff] [ 1.776121] pci 0000:02:03.0: reg 10 64bit mmio: [0xfc300000-0xfc31ffff] [ 1.780021] pci 0000:02:03.0: reg 20 io port: [0x3400-0x343f] [ 1.784039] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold [ 1.788009] pci 0000:02:03.0: PME# disabled [ 1.792059] pci 0000:02:03.1: reg 10 64bit mmio: [0xfc320000-0xfc33ffff] [ 1.796021] pci 0000:02:03.1: reg 20 io port: [0x3440-0x347f] [ 1.800038] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold [ 1.804009] pci 0000:02:03.1: PME# disabled [ 1.808071] pci 0000:01:1d.0: bridge io port: [0x3000-0x3fff] [ 1.812009] pci 0000:01:1d.0: bridge 32bit mmio: [0xfc200000-0xfc7fffff] [ 1.816066] pci 0000:03:02.0: reg 10 io port: [0x4400-0x44ff] [ 1.820018] pci 0000:03:02.0: reg 14 64bit mmio: [0xfc800000-0xfc801fff] [ 1.824013] pci 0000:03:02.0: reg 1c io port: [0x4000-0x40ff] [ 1.828023] pci 0000:03:02.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 1.832091] pci 0000:03:02.1: reg 10 io port: [0x4c00-0x4cff] [ 1.836018] pci 0000:03:02.1: reg 14 64bit mmio: [0xfc802000-0xfc803fff] [ 1.840013] pci 0000:03:02.1: reg 1c io port: [0x4800-0x48ff] [ 1.844023] pci 0000:03:02.1: reg 30 32bit mmio pref: [0x000000-0x07ffff] [ 1.848107] pci 0000:01:1f.0: bridge io port: [0x4000-0x4fff] [ 1.852009] pci 0000:01:1f.0: bridge 32bit mmio: [0xfc800000-0xfc8fffff] [ 1.856058] pci 0000:04:01.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 1.860012] pci 0000:04:01.0: reg 14 io port: [0x5000-0x50ff] [ 1.864012] pci 0000:04:01.0: reg 18 32bit mmio: [0xfc900000-0xfc900fff] [ 1.868027] pci 0000:04:01.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.872025] pci 0000:04:01.0: supports D1 D2 [ 1.876054] pci 0000:00:1e.0: transparent bridge [ 1.880010] pci 0000:00:1e.0: bridge io port: [0x5000-0x5fff] [ 1.884010] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc900000-0xfdffffff] [ 1.888529] vgaarb: device added: PCI:0000:04:01.0,decodes=io+mem,owns=io+mem,locks=none [ 1.896083] PCI: Discovered primary peer bus 10 [IRQ] [ 1.900067] PCI: Discovered primary peer bus 11 [IRQ] [ 1.904072] PCI: Discovered primary peer bus 12 [IRQ] [ 1.908022] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2480] [ 1.912117] initcall pci_subsys_init+0x0/0xdc returned 0 after 210937 usecs [ 1.916009] calling proto_init+0x0/0xa @ 1 [ 1.920011] initcall proto_init+0x0/0xa returned 0 after 0 usecs [ 1.924008] calling net_dev_init+0x0/0x139 @ 1 [ 1.928082] initcall net_dev_init+0x0/0x139 returned 0 after 0 usecs [ 1.932009] calling neigh_init+0x0/0x65 @ 1 [ 1.936009] initcall neigh_init+0x0/0x65 returned 0 after 0 usecs [ 1.940008] calling fib_rules_init+0x0/0x93 @ 1 [ 1.944010] initcall fib_rules_init+0x0/0x93 returned 0 after 0 usecs [ 1.948008] calling pktsched_init+0x0/0xb2 @ 1 [ 1.952012] initcall pktsched_init+0x0/0xb2 returned 0 after 0 usecs [ 1.956008] calling tc_filter_init+0x0/0x42 @ 1 [ 1.960009] initcall tc_filter_init+0x0/0x42 returned 0 after 0 usecs [ 1.964008] calling tc_action_init+0x0/0x42 @ 1 [ 1.968009] initcall tc_action_init+0x0/0x42 returned 0 after 0 usecs [ 1.972008] calling genl_init+0x0/0x73 @ 1 [ 1.976019] initcall genl_init+0x0/0x73 returned 0 after 0 usecs [ 1.980009] calling wireless_nlevent_init+0x0/0xa @ 1 [ 1.984009] initcall wireless_nlevent_init+0x0/0xa returned 0 after 0 usecs [ 1.988008] calling sysctl_init+0x0/0x37 @ 1 [ 1.992009] initcall sysctl_init+0x0/0x37 returned 0 after 0 usecs [ 1.996010] calling print_all_ICs+0x0/0x45b @ 1 [ 2.000007] [ 2.000008] printing PIC contents [ 2.004008] ... PIC IMR: fffb [ 2.007117] ... PIC IRR: 0001 [ 2.008007] ... PIC ISR: 0000 [ 2.012008] ... PIC ELCR: 0ca0 [ 2.015115] printing local APIC contents on CPU#0/0: [ 2.016004] ... APIC ID: 00000000 (0) [ 2.016004] ... APIC VERSION: 00050014 [ 2.016004] ... APIC TASKPRI: 00000000 (00) [ 2.016004] ... APIC PROCPRI: 00000000 [ 2.016004] ... APIC LDR: 01000000 [ 2.016004] ... APIC DFR: ffffffff [ 2.016004] ... APIC SPIV: 000001ff [ 2.016004] ... APIC ISR field: [ 2.016004] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.016004] ... APIC TMR field: [ 2.016004] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.016004] ... APIC IRR field: [ 2.016004] 0000000000000000000000000000000000000000000000000000000000008000 [ 2.016004] ... APIC ESR: 00000000 [ 2.016004] ... APIC ICR: 000008fd [ 2.016004] ... APIC ICR2: 08000000 [ 2.016004] ... APIC LVTT: 000200ef [ 2.016004] ... APIC LVTPC: 00010000 [ 2.016004] ... APIC LVT0: 00010700 [ 2.016004] ... APIC LVT1: 00000400 [ 2.016004] ... APIC LVTERR: 000000fe [ 2.016004] ... APIC TMICT: 0000822d [ 2.016004] ... APIC TMCCT: 00005b44 [ 2.016004] ... APIC TDCR: 00000003 [ 2.016004] [ 2.016011] printing local APIC contents on CPU#1/6: [ 2.020004] ... APIC ID: 06000000 (6) [ 2.020004] ... APIC VERSION: 00050014 [ 2.020004] ... APIC TASKPRI: 00000000 (00) [ 2.020004] ... APIC PROCPRI: 00000000 [ 2.020004] ... APIC LDR: 02000000 [ 2.020004] ... APIC DFR: ffffffff [ 2.020004] ... APIC SPIV: 000001ff [ 2.020004] ... APIC ISR field: [ 2.020004] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.020004] ... APIC TMR field: [ 2.020004] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.020004] ... APIC IRR field: [ 2.020004] 0000000000000000000000000000000000000000000000000000000000008000 [ 2.020004] ... APIC ESR: 00000000 [ 2.020004] ... APIC ICR: 00000000 [ 2.020004] ... APIC ICR2: 00000000 [ 2.020004] ... APIC LVTT: 000200ef [ 2.020004] ... APIC LVTPC: 00010000 [ 2.020004] ... APIC LVT0: 00010700 [ 2.020004] ... APIC LVT1: 00010400 [ 2.020004] ... APIC LVTERR: 000000fe [ 2.020004] ... APIC TMICT: 0000822d [ 2.020004] ... APIC TMCCT: 00003881 [ 2.020004] ... APIC TDCR: 00000003 [ 2.020004] [ 2.120007] printing local APIC contents on CPU#2/1: [ 2.120012] Clocksource tsc unstable (delta = 303993003 ns) [ 2.124005] ... APIC ID: 01000000 (1) [ 2.124005] ... APIC VERSION: 00050014 [ 2.124005] ... APIC TASKPRI: 00000000 (00) [ 2.124005] ... APIC PROCPRI: 00000000 [ 2.124005] ... APIC LDR: 04000000 [ 2.124005] ... APIC DFR: ffffffff [ 2.124005] ... APIC SPIV: 000001ff [ 2.124005] ... APIC ISR field: [ 2.124005] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.124005] ... APIC TMR field: [ 2.124005] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.124005] ... APIC IRR field: [ 2.124005] 0000000000000000000000000000000000000000000000000000000020008000 [ 2.124005] ... APIC ESR: 00000000 [ 2.124005] ... APIC ICR: 000008fd [ 2.124005] ... APIC ICR2: 08000000 [ 2.124005] ... APIC LVTT: 000200ef [ 2.124005] ... APIC LVTPC: 00010000 [ 2.124005] ... APIC LVT0: 00010700 [ 2.124005] ... APIC LVT1: 00010400 [ 2.124005] ... APIC LVTERR: 000000fe [ 2.124005] ... APIC TMICT: 0000822d [ 2.124005] ... APIC TMCCT: 00006ab5 [ 2.124005] ... APIC TDCR: 00000003 [ 2.124005] [ 2.232007] printing local APIC contents on CPU#3/7: [ 2.236005] ... APIC ID: 07000000 (7) [ 2.236005] ... APIC VERSION: 00050014 [ 2.236005] ... APIC TASKPRI: 00000000 (00) [ 2.236005] ... APIC PROCPRI: 00000000 [ 2.236005] ... APIC LDR: 08000000 [ 2.236005] ... APIC DFR: ffffffff [ 2.236005] ... APIC SPIV: 000001ff [ 2.236005] ... APIC ISR field: [ 2.236005] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.236005] ... APIC TMR field: [ 2.236005] 0000000000000000000000000000000000000000000000000000000000000000 [ 2.236005] ... APIC IRR field: [ 2.236005] 0000000000000000000000000000000000000000000000000000000000008000 [ 2.236005] ... APIC ESR: 00000000 [ 2.236005] ... APIC ICR: 000008fd [ 2.236005] ... APIC ICR2: 01000000 [ 2.236005] ... APIC LVTT: 000200ef [ 2.236005] ... APIC LVTPC: 00010000 [ 2.236005] ... APIC LVT0: 00010700 [ 2.236005] ... APIC LVT1: 00010400 [ 2.236005] ... APIC LVTERR: 000000fe [ 2.236005] ... APIC TMICT: 0000822d [ 2.236005] ... APIC TMCCT: 00005dbc [ 2.236005] ... APIC TDCR: 00000003 [ 2.236005] [ 2.336940] number of MP IRQ sources: 23. [ 2.340008] number of IO-APIC #2 registers: 24. [ 2.344008] number of IO-APIC #3 registers: 24. [ 2.348008] number of IO-APIC #4 registers: 24. [ 2.352007] testing the IO APIC....................... [ 2.356011] [ 2.360007] IO APIC #2...... [ 2.364007] .... register #00: 02008000 [ 2.368007] ....... : physical APIC id: 02 [ 2.372007] ....... : Delivery Type: 1 [ 2.376007] ....... : LTS : 0 [ 2.380007] .... register #01: 00178020 [ 2.384008] ....... : max redirection entries: 0017 [ 2.388007] ....... : PRQ implemented: 1 [ 2.392007] ....... : IO APIC version: 0020 [ 2.396007] .... register #02: 00000000 [ 2.400007] ....... : arbitration: 00 [ 2.404009] .... register #03: 00000001 [ 2.408007] ....... : Boot DT : 1 [ 2.412007] .... IRQ redirection table: [ 2.416007] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 2.420010] 00 000 1 0 0 0 0 0 0 00 [ 2.424010] 01 00F 0 0 0 0 0 1 1 31 [ 2.428010] 02 00F 0 0 0 0 0 1 1 30 [ 2.436010] 03 00F 0 0 0 0 0 1 1 33 [ 2.440010] 04 00F 0 0 0 0 0 1 1 34 [ 2.444010] 05 00F 0 0 0 0 0 1 1 35 [ 2.452010] 06 00F 0 0 0 0 0 1 1 36 [ 2.456010] 07 00F 0 0 0 0 0 1 1 37 [ 2.463282] 08 00F 0 0 0 0 0 1 1 38 [ 2.468010] 09 00F 0 0 0 0 0 1 1 39 [ 2.472010] 0a 000 1 0 0 0 0 0 0 00 [ 2.479290] 0b 000 1 0 0 0 0 0 0 00 [ 2.484010] 0c 00F 0 0 0 0 0 1 1 3C [ 2.488010] 0d 00F 0 0 0 0 0 1 1 3D [ 2.495282] 0e 00F 0 0 0 0 0 1 1 3E [ 2.500010] 0f 00F 0 0 0 0 0 1 1 3F [ 2.504010] 10 00F 1 1 0 1 0 1 1 49 [ 2.511283] 11 000 1 0 0 0 0 0 0 00 [ 2.516010] 12 00F 1 1 0 1 0 1 1 51 [ 2.520010] 13 00F 1 1 0 1 0 1 1 59 [ 2.527283] 14 000 1 0 0 0 0 0 0 00 [ 2.532011] 15 000 1 0 0 0 0 0 0 00 [ 2.536010] 16 000 1 0 0 0 0 0 0 00 [ 2.543282] 17 000 1 0 0 0 0 0 0 00 [ 2.548010] [ 2.549553] IO APIC #3...... [ 2.552008] .... register #00: 03000000 [ 2.556007] ....... : physical APIC id: 03 [ 2.560008] ....... : Delivery Type: 0 [ 2.564008] ....... : LTS : 0 [ 2.568008] .... register #01: 00178020 [ 2.572008] ....... : max redirection entries: 0017 [ 2.576008] ....... : PRQ implemented: 1 [ 2.580008] ....... : IO APIC version: 0020 [ 2.584008] .... register #02: 03000000 [ 2.588008] ....... : arbitration: 03 [ 2.592008] .... register #03: 00000001 [ 2.596008] ....... : Boot DT : 1 [ 2.600007] .... IRQ redirection table: [ 2.604007] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 2.608009] 00 000 1 0 0 0 0 0 0 00 [ 2.612009] 01 000 1 0 0 0 0 0 0 00 [ 2.619281] 02 000 1 0 0 0 0 0 0 00 [ 2.624009] 03 000 1 0 0 0 0 0 0 00 [ 2.628009] 04 000 1 0 0 0 0 0 0 00 [ 2.635283] 05 000 1 0 0 0 0 0 0 00 [ 2.640009] 06 000 1 0 0 0 0 0 0 00 [ 2.644009] 07 000 1 0 0 0 0 0 0 00 [ 2.651281] 08 000 1 0 0 0 0 0 0 00 [ 2.656009] 09 000 1 0 0 0 0 0 0 00 [ 2.660011] 0a 000 1 0 0 0 0 0 0 00 [ 2.667281] 0b 000 1 0 0 0 0 0 0 00 [ 2.672009] 0c 000 1 0 0 0 0 0 0 00 [ 2.676009] 0d 000 1 0 0 0 0 0 0 00 [ 2.683291] 0e 000 1 0 0 0 0 0 0 00 [ 2.688009] 0f 000 1 0 0 0 0 0 0 00 [ 2.692010] 10 000 1 0 0 0 0 0 0 00 [ 2.699290] 11 000 1 0 0 0 0 0 0 00 [ 2.704009] 12 000 1 0 0 0 0 0 0 00 [ 2.708009] 13 000 1 0 0 0 0 0 0 00 [ 2.716009] 14 000 1 0 0 0 0 0 0 00 [ 2.720009] 15 000 1 0 0 0 0 0 0 00 [ 2.724010] 16 000 1 0 0 0 0 0 0 00 [ 2.732009] 17 000 1 0 0 0 0 0 0 00 [ 2.736010] [ 2.737553] IO APIC #4...... [ 2.740008] .... register #00: 04000000 [ 2.744008] ....... : physical APIC id: 04 [ 2.748008] ....... : Delivery Type: 0 [ 2.752008] ....... : LTS : 0 [ 2.756008] .... register #01: 00178020 [ 2.760008] ....... : max redirection entries: 0017 [ 2.764008] ....... : PRQ implemented: 1 [ 2.768008] ....... : IO APIC version: 0020 [ 2.772008] .... register #02: 04000000 [ 2.776008] ....... : arbitration: 04 [ 2.780008] .... register #03: 00000001 [ 2.784008] ....... : Boot DT : 1 [ 2.788009] .... IRQ redirection table: [ 2.792008] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 2.796010] 00 000 1 0 0 0 0 0 0 00 [ 2.804010] 01 000 1 0 0 0 0 0 0 00 [ 2.808010] 02 000 1 0 0 0 0 0 0 00 [ 2.815280] 03 000 1 0 0 0 0 0 0 00 [ 2.820010] 04 000 1 0 0 0 0 0 0 00 [ 2.824010] 05 000 1 0 0 0 0 0 0 00 [ 2.831281] 06 000 1 0 0 0 0 0 0 00 [ 2.836010] 07 000 1 0 0 0 0 0 0 00 [ 2.840010] 08 000 1 0 0 0 0 0 0 00 [ 2.847282] 09 000 1 0 0 0 0 0 0 00 [ 2.852010] 0a 000 1 0 0 0 0 0 0 00 [ 2.856010] 0b 000 1 0 0 0 0 0 0 00 [ 2.863283] 0c 000 1 0 0 0 0 0 0 00 [ 2.868010] 0d 000 1 0 0 0 0 0 0 00 [ 2.872010] 0e 000 1 0 0 0 0 0 0 00 [ 2.879292] 0f 000 1 0 0 0 0 0 0 00 [ 2.884010] 10 000 1 0 0 0 0 0 0 00 [ 2.888010] 11 000 1 0 0 0 0 0 0 00 [ 2.895291] 12 000 1 0 0 0 0 0 0 00 [ 2.900010] 13 000 1 0 0 0 0 0 0 00 [ 2.904010] 14 000 1 0 0 0 0 0 0 00 [ 2.911283] 15 000 1 0 0 0 0 0 0 00 [ 2.916011] 16 000 1 0 0 0 0 0 0 00 [ 2.920010] 17 000 1 0 0 0 0 0 0 00 [ 2.927281] IRQ to pin mappings: [ 2.928009] IRQ0 -> 0:2 [ 2.932828] IRQ1 -> 0:1 [ 2.935443] IRQ3 -> 0:3 [ 2.936827] IRQ4 -> 0:4 [ 2.940824] IRQ5 -> 0:5 [ 2.943439] IRQ6 -> 0:6 [ 2.944826] IRQ7 -> 0:7 [ 2.948818] IRQ8 -> 0:8 [ 2.951433] IRQ9 -> 0:9 [ 2.953118] IRQ12 -> 0:12 [ 2.956911] IRQ13 -> 0:13 [ 2.960008] IRQ14 -> 0:14 [ 2.962792] IRQ15 -> 0:15 [ 2.964912] IRQ16 -> 0:16 [ 2.968247] IRQ18 -> 0:18 [ 2.971039] IRQ19 -> 0:19 [ 2.972983] .................................... done. [ 2.976012] initcall print_all_ICs+0x0/0x45b returned 0 after 953126 usecs [ 2.980011] calling hpet_late_init+0x0/0xa6 @ 1 [ 2.984011] initcall hpet_late_init+0x0/0xa6 returned -19 after 0 usecs [ 2.988010] calling init_k8_nbs+0x0/0x1b @ 1 [ 2.992033] initcall init_k8_nbs+0x0/0x1b returned 0 after 0 usecs [ 2.996011] calling clocksource_done_booting+0x0/0x4b @ 1 [ 3.000013] initcall clocksource_done_booting+0x0/0x4b returned 0 after 0 usecs [ 3.004011] calling rb_init_debugfs+0x0/0x25 @ 1 [ 3.008022] initcall rb_init_debugfs+0x0/0x25 returned 0 after 0 usecs [ 3.012011] calling tracer_init_debugfs+0x0/0x247 @ 1 [ 3.016118] initcall tracer_init_debugfs+0x0/0x247 returned 0 after 0 usecs [ 3.020011] calling init_trace_printk_function_export+0x0/0x26 @ 1 [ 3.024013] initcall init_trace_printk_function_export+0x0/0x26 returned 0 after 0 usecs [ 3.028010] calling event_trace_init+0x0/0x198 @ 1 [ 3.033425] initcall event_trace_init+0x0/0x198 returned 0 after 0 usecs [ 3.036012] calling init_pipe_fs+0x0/0x39 @ 1 [ 3.040030] initcall init_pipe_fs+0x0/0x39 returned 0 after 0 usecs [ 3.044012] calling eventpoll_init+0x0/0xc6 @ 1 [ 3.048021] initcall eventpoll_init+0x0/0xc6 returned 0 after 0 usecs [ 3.052010] calling anon_inode_init+0x0/0xe2 @ 1 [ 3.056023] initcall anon_inode_init+0x0/0xe2 returned 0 after 0 usecs [ 3.060011] calling tomoyo_initerface_init+0x0/0x10c @ 1 [ 3.064011] initcall tomoyo_initerface_init+0x0/0x10c returned 0 after 0 usecs [ 3.068010] calling blk_scsi_ioctl_init+0x0/0x284 @ 1 [ 3.072011] initcall blk_scsi_ioctl_init+0x0/0x284 returned 0 after 0 usecs [ 3.076012] calling acpi_event_init+0x0/0x42 @ 1 [ 3.080011] initcall acpi_event_init+0x0/0x42 returned 0 after 0 usecs [ 3.084010] calling pnpacpi_init+0x0/0x77 @ 1 [ 3.088009] pnp: PnP ACPI: disabled [ 3.092011] initcall pnpacpi_init+0x0/0x77 returned 0 after 3906 usecs [ 3.096010] calling pnpbios_init+0x0/0x333 @ 1 [ 3.100011] PnPBIOS: Scanning system for PnP BIOS support... [ 3.104020] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6d30 [ 3.108010] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x975a, dseg 0x400 [ 3.112493] pnp 00:0b: io resource (0x1000-0x105f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 3.116011] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 3.121271] PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver [ 3.124013] initcall pnpbios_init+0x0/0x333 returned 0 after 23437 usecs [ 3.128012] calling pnp_system_init+0x0/0xa @ 1 [ 3.132021] system 00:00: iomem range 0xfffffffffff00000-0xffffffffffffffff has been reserved [ 3.136011] system 00:00: iomem range 0xfffffffffebffc00-0xfffffffffebfffff has been reserved [ 3.140015] system 00:01: iomem range 0x0-0x9ffff could not be reserved [ 3.144011] system 00:01: iomem range 0xe4000-0xfffff could not be reserved [ 3.148017] system 00:09: iomem range 0xe0000-0xe3fff could not be reserved [ 3.152015] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 3.156011] system 00:0b: ioport range 0x1180-0x11bf has been reserved [ 3.160018] system 00:0e: iomem range 0xfffffffffec00000-0xfffffffffec0ffff has been reserved [ 3.164011] system 00:0e: iomem range 0xfffffffffee00000-0xfffffffffee00fff has been reserved [ 3.168014] system 00:0f: iomem range 0xcf800-0xcffff has been reserved [ 3.172025] initcall pnp_system_init+0x0/0xa returned 0 after 39062 usecs [ 3.176011] calling pcistub_init+0x0/0x18a @ 1 [ 3.180151] initcall pcistub_init+0x0/0x18a returned 0 after 0 usecs [ 3.184010] calling chr_dev_init+0x0/0x9d @ 1 [ 3.188185] initcall chr_dev_init+0x0/0x9d returned 0 after 0 usecs [ 3.192012] calling firmware_class_init+0x0/0x5b @ 1 [ 3.196021] initcall firmware_class_init+0x0/0x5b returned 0 after 0 usecs [ 3.200011] calling cpufreq_gov_performance_init+0x0/0xa @ 1 [ 3.204011] initcall cpufreq_gov_performance_init+0x0/0xa returned 0 after 0 usecs [ 3.208010] calling cpufreq_gov_dbs_init+0x0/0x9a @ 1 [ 3.212054] initcall cpufreq_gov_dbs_init+0x0/0x9a returned 0 after 0 usecs [ 3.216012] calling init_acpi_pm_clocksource+0x0/0x1b0 @ 1 [ 3.220011] initcall init_acpi_pm_clocksource+0x0/0x1b0 returned -19 after 0 usecs [ 3.224011] calling pcibios_assign_resources+0x0/0x7d @ 1 [ 3.228065] pci 0000:01:1d.0: PCI bridge, secondary bus 0000:02 [ 3.232011] pci 0000:01:1d.0: IO window: 0x3000-0x3fff [ 3.236013] pci 0000:01:1d.0: MEM window: 0xfc200000-0xfc7fffff [ 3.240011] pci 0000:01:1d.0: PREFETCH window: disabled [ 3.244015] pci 0000:01:1f.0: PCI bridge, secondary bus 0000:03 [ 3.248011] pci 0000:01:1f.0: IO window: 0x4000-0x4fff [ 3.252013] pci 0000:01:1f.0: MEM window: 0xfc800000-0xfc8fffff [ 3.256012] pci 0000:01:1f.0: PREFETCH window: 0xf8000000-0xf80fffff [ 3.260014] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 3.264010] pci 0000:00:02.0: IO window: 0x3000-0x4fff [ 3.268012] pci 0000:00:02.0: MEM window: 0xfc100000-0xfc8fffff [ 3.272011] pci 0000:00:02.0: PREFETCH window: 0xf8000000-0xf80fffff [ 3.276013] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 3.280011] pci 0000:00:1e.0: IO window: 0x5000-0x5fff [ 3.284013] pci 0000:00:1e.0: MEM window: 0xfc900000-0xfdffffff [ 3.288012] pci 0000:00:1e.0: PREFETCH window: 0xf8100000-0xf81fffff [ 3.292035] pci 0000:00:1e.0: setting latency timer to 64 [ 3.296012] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 3.300012] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 3.304010] pci_bus 0000:01: resource 0 io: [0x3000-0x4fff] [ 3.308010] pci_bus 0000:01: resource 1 mem: [0xfc100000-0xfc8fffff] [ 3.312010] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xf80fffff] [ 3.316010] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 3.320010] pci_bus 0000:02: resource 1 mem: [0xfc200000-0xfc7fffff] [ 3.324010] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 3.328010] pci_bus 0000:03: resource 1 mem: [0xfc800000-0xfc8fffff] [ 3.332010] pci_bus 0000:03: resource 2 pref mem [0xf8000000-0xf80fffff] [ 3.336010] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff] [ 3.340010] pci_bus 0000:04: resource 1 mem: [0xfc900000-0xfdffffff] [ 3.344010] pci_bus 0000:04: resource 2 pref mem [0xf8100000-0xf81fffff] [ 3.348010] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 3.352010] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 3.356011] pci_bus 0000:10: resource 0 io: [0x00-0xffff] [ 3.360010] pci_bus 0000:10: resource 1 mem: [0x000000-0xffffffffffffffff] [ 3.364010] pci_bus 0000:11: resource 0 io: [0x00-0xffff] [ 3.368010] pci_bus 0000:11: resource 1 mem: [0x000000-0xffffffffffffffff] [ 3.372010] pci_bus 0000:12: resource 0 io: [0x00-0xffff] [ 3.376010] pci_bus 0000:12: resource 1 mem: [0x000000-0xffffffffffffffff] [ 3.380012] initcall pcibios_assign_resources+0x0/0x7d returned 0 after 148437 usecs [ 3.384011] calling sysctl_core_init+0x0/0x28 @ 1 [ 3.388038] initcall sysctl_core_init+0x0/0x28 returned 0 after 0 usecs [ 3.392011] calling inet_init+0x0/0x1c5 @ 1 [ 3.396020] NET: Registered protocol family 2 [ 3.400131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 3.404433] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 3.412845] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 3.420199] TCP: Hash tables configured (established 131072 bind 65536) [ 3.424010] TCP reno registered [ 3.428201] initcall inet_init+0x0/0x1c5 returned 0 after 31250 usecs [ 3.432012] calling af_unix_init+0x0/0x41 @ 1 [ 3.436012] NET: Registered protocol family 1 [ 3.440022] initcall af_unix_init+0x0/0x41 returned 0 after 3906 usecs [ 3.444014] calling pci_apply_final_quirks+0x0/0x28 @ 1 [ 3.448097] pci 0000:04:01.0: Boot video device [ 3.452012] initcall pci_apply_final_quirks+0x0/0x28 returned 0 after 3906 usecs [ 3.456014] calling populate_rootfs+0x0/0xec @ 1 [ 3.460090] Unpacking initramfs... [ 3.776261] Freeing initrd memory: 10106k freed [ 3.793581] initcall populate_rootfs+0x0/0xec returned 0 after 324219 usecs [ 3.796015] calling pci_iommu_init+0x0/0x32 @ 1 [ 3.800015] initcall pci_iommu_init+0x0/0x32 returned 0 after 0 usecs [ 3.804013] calling i8259A_init_sysfs+0x0/0x19 @ 1 [ 3.808073] initcall i8259A_init_sysfs+0x0/0x19 returned 0 after 0 usecs [ 3.812021] calling sbf_init+0x0/0xd0 @ 1 [ 3.816012] initcall sbf_init+0x0/0xd0 returned 0 after 0 usecs [ 3.820012] calling i8237A_init_sysfs+0x0/0x19 @ 1 [ 3.824024] initcall i8237A_init_sysfs+0x0/0x19 returned 0 after 0 usecs [ 3.828013] calling add_rtc_cmos+0x0/0x77 @ 1 [ 3.832016] initcall add_rtc_cmos+0x0/0x77 returned 0 after 0 usecs [ 3.836013] calling cache_sysfs_init+0x0/0x51 @ 1 [ 3.840012] initcall cache_sysfs_init+0x0/0x51 returned 0 after 0 usecs [ 3.844012] calling mce_init_device+0x0/0xd1 @ 1 [ 3.848157] initcall mce_init_device+0x0/0xd1 returned 0 after 0 usecs [ 3.852034] calling threshold_init_device+0x0/0x63 @ 1 [ 3.856012] initcall threshold_init_device+0x0/0x63 returned 0 after 0 usecs [ 3.860011] calling thermal_throttle_init_device+0x0/0x79 @ 1 [ 3.864022] initcall thermal_throttle_init_device+0x0/0x79 returned 0 after 0 usecs [ 3.868016] calling ioapic_init_sysfs+0x0/0x7d @ 1 [ 3.872039] initcall ioapic_init_sysfs+0x0/0x7d returned 0 after 0 usecs [ 3.876012] calling init_vmi_clocksource+0x0/0xc2 @ 1 [ 3.880012] initcall init_vmi_clocksource+0x0/0xc2 returned 0 after 0 usecs [ 3.884013] calling add_pcspkr+0x0/0x20 @ 1 [ 3.888031] initcall add_pcspkr+0x0/0x20 returned 0 after 0 usecs [ 3.892012] calling init_sched_debug_procfs+0x0/0x23 @ 1 [ 3.896020] initcall init_sched_debug_procfs+0x0/0x23 returned 0 after 0 usecs [ 3.900012] calling proc_execdomains_init+0x0/0x1a @ 1 [ 3.904014] initcall proc_execdomains_init+0x0/0x1a returned 0 after 0 usecs [ 3.908012] calling ioresources_init+0x0/0x30 @ 1 [ 3.912014] initcall ioresources_init+0x0/0x30 returned 0 after 0 usecs [ 3.916012] calling uid_cache_init+0x0/0x76 @ 1 [ 3.920027] initcall uid_cache_init+0x0/0x76 returned 0 after 0 usecs [ 3.924012] calling init_posix_timers+0x0/0x149 @ 1 [ 3.928020] initcall init_posix_timers+0x0/0x149 returned 0 after 0 usecs [ 3.932012] calling init_posix_cpu_timers+0x0/0xc2 @ 1 [ 3.936012] initcall init_posix_cpu_timers+0x0/0xc2 returned 0 after 0 usecs [ 3.940014] calling nsproxy_cache_init+0x0/0x25 @ 1 [ 3.944013] initcall nsproxy_cache_init+0x0/0x25 returned 0 after 0 usecs [ 3.948013] calling create_proc_profile+0x0/0x186 @ 1 [ 3.952012] initcall create_proc_profile+0x0/0x186 returned 0 after 0 usecs [ 3.956012] calling timekeeping_init_device+0x0/0x19 @ 1 [ 3.960026] initcall timekeeping_init_device+0x0/0x19 returned 0 after 0 usecs [ 3.964012] calling init_clocksource_sysfs+0x0/0x3f @ 1 [ 3.968027] initcall init_clocksource_sysfs+0x0/0x3f returned 0 after 0 usecs [ 3.972012] calling init_timer_list_procfs+0x0/0x23 @ 1 [ 3.976014] initcall init_timer_list_procfs+0x0/0x23 returned 0 after 0 usecs [ 3.980012] calling init_tstats_procfs+0x0/0x23 @ 1 [ 3.984014] initcall init_tstats_procfs+0x0/0x23 returned 0 after 0 usecs [ 3.988012] calling futex_init+0x0/0x7d @ 1 [ 3.992026] initcall futex_init+0x0/0x7d returned 0 after 0 usecs [ 3.996012] calling proc_dma_init+0x0/0x1a @ 1 [ 4.000013] initcall proc_dma_init+0x0/0x1a returned 0 after 0 usecs [ 4.004012] calling proc_modules_init+0x0/0x1a @ 1 [ 4.008014] initcall proc_modules_init+0x0/0x1a returned 0 after 0 usecs [ 4.012012] calling kallsyms_init+0x0/0x1d @ 1 [ 4.016013] initcall kallsyms_init+0x0/0x1d returned 0 after 0 usecs [ 4.020012] calling snapshot_device_init+0x0/0xa @ 1 [ 4.024039] initcall snapshot_device_init+0x0/0xa returned 0 after 0 usecs [ 4.028012] calling crash_save_vmcoreinfo_init+0x0/0x344 @ 1 [ 4.032038] initcall crash_save_vmcoreinfo_init+0x0/0x344 returned 0 after 0 usecs [ 4.036012] calling crash_notes_memory_init+0x0/0x2d @ 1 [ 4.040021] initcall crash_notes_memory_init+0x0/0x2d returned 0 after 0 usecs [ 4.044012] calling pid_namespaces_init+0x0/0x25 @ 1 [ 4.048014] initcall pid_namespaces_init+0x0/0x25 returned 0 after 0 usecs [ 4.052012] calling audit_init+0x0/0x10a @ 1 [ 4.056011] audit: initializing netlink socket (disabled) [ 4.060031] type=2000 audit(1290463719.060:1): initialized [ 4.064014] initcall audit_init+0x0/0x10a returned 0 after 7812 usecs [ 4.068013] calling audit_tree_init+0x0/0x37 @ 1 [ 4.072014] initcall audit_tree_init+0x0/0x37 returned 0 after 0 usecs [ 4.076012] calling init_kprobes+0x0/0x12c @ 1 [ 4.085233] initcall init_kprobes+0x0/0x12c returned 0 after 3906 usecs [ 4.088012] calling hung_task_init+0x0/0x3c @ 1 [ 4.092070] initcall hung_task_init+0x0/0x3c returned 0 after 0 usecs [ 4.096013] calling utsname_sysctl_init+0x0/0xd @ 1 [ 4.100044] initcall utsname_sysctl_init+0x0/0xd returned 0 after 0 usecs [ 4.104013] calling init_tracepoints+0x0/0xa @ 1 [ 4.108013] initcall init_tracepoints+0x0/0xa returned 0 after 0 usecs [ 4.112012] calling init_events+0x0/0x53 @ 1 [ 4.116015] initcall init_events+0x0/0x53 returned 0 after 0 usecs [ 4.120012] calling init_sched_switch_trace+0x0/0xa @ 1 [ 4.124014] initcall init_sched_switch_trace+0x0/0xa returned 0 after 0 usecs [ 4.128012] calling init_blk_tracer+0x0/0x4c @ 1 [ 4.132013] initcall init_blk_tracer+0x0/0x4c returned 0 after 0 usecs [ 4.136012] calling perf_event_sysfs_init+0x0/0xf @ 1 [ 4.140019] initcall perf_event_sysfs_init+0x0/0xf returned 0 after 0 usecs [ 4.144012] calling init_per_zone_wmark_min+0x0/0x55 @ 1 [ 4.148874] initcall init_per_zone_wmark_min+0x0/0x55 returned 0 after 0 usecs [ 4.152013] calling kswapd_init+0x0/0x19 @ 1 [ 4.156029] initcall kswapd_init+0x0/0x19 returned 0 after 0 usecs [ 4.160014] calling setup_vmstat+0x0/0xa4 @ 1 [ 4.164028] initcall setup_vmstat+0x0/0xa4 returned 0 after 0 usecs [ 4.168012] calling mm_sysfs_init+0x0/0x1e @ 1 [ 4.172017] initcall mm_sysfs_init+0x0/0x1e returned 0 after 0 usecs [ 4.176012] calling proc_vmalloc_init+0x0/0x1d @ 1 [ 4.180014] initcall proc_vmalloc_init+0x0/0x1d returned 0 after 0 usecs [ 4.184012] calling init_emergency_pool+0x0/0x70 @ 1 [ 4.188029] highmem bounce pool size: 64 pages [ 4.192013] initcall init_emergency_pool+0x0/0x70 returned 0 after 3906 usecs [ 4.196014] calling procswaps_init+0x0/0x1a @ 1 [ 4.200014] initcall procswaps_init+0x0/0x1a returned 0 after 0 usecs [ 4.204012] calling hugetlb_init+0x0/0x2cc @ 1 [ 4.208013] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.212020] initcall hugetlb_init+0x0/0x2cc returned 0 after 3906 usecs [ 4.216013] calling ksm_init+0x0/0x156 @ 1 [ 4.220025] initcall ksm_init+0x0/0x156 returned 0 after 0 usecs [ 4.224013] calling slab_proc_init+0x0/0x1d @ 1 [ 4.228015] initcall slab_proc_init+0x0/0x1d returned 0 after 0 usecs [ 4.232012] calling slab_sysfs_init+0x0/0xb0 @ 1 [ 4.240353] initcall slab_sysfs_init+0x0/0xb0 returned 0 after 3906 usecs [ 4.244012] calling fasync_init+0x0/0x22 @ 1 [ 4.248018] initcall fasync_init+0x0/0x22 returned 0 after 0 usecs [ 4.252013] calling proc_filesystems_init+0x0/0x1a @ 1 [ 4.256015] initcall proc_filesystems_init+0x0/0x1a returned 0 after 0 usecs [ 4.260012] calling dnotify_init+0x0/0x6b @ 1 [ 4.264033] initcall dnotify_init+0x0/0x6b returned 0 after 0 usecs [ 4.268012] calling inotify_setup+0x0/0xd @ 1 [ 4.272012] initcall inotify_setup+0x0/0xd returned 0 after 0 usecs [ 4.276012] calling inotify_user_setup+0x0/0x9d @ 1 [ 4.280039] initcall inotify_user_setup+0x0/0x9d returned 0 after 0 usecs [ 4.284012] calling aio_setup+0x0/0x5f @ 1 [ 4.292026] initcall aio_setup+0x0/0x5f returned 0 after 3906 usecs [ 4.296013] calling proc_locks_init+0x0/0x1a @ 1 [ 4.300014] initcall proc_locks_init+0x0/0x1a returned 0 after 0 usecs [ 4.304012] calling dquot_init+0x0/0xd8 @ 1 [ 4.308011] VFS: Disk quotas dquot_6.5.2 [ 4.312082] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 4.316018] initcall dquot_init+0x0/0xd8 returned 0 after 7812 usecs [ 4.320013] calling proc_cmdline_init+0x0/0x1a @ 1 [ 4.324015] initcall proc_cmdline_init+0x0/0x1a returned 0 after 0 usecs [ 4.328012] calling proc_cpuinfo_init+0x0/0x1a @ 1 [ 4.332014] initcall proc_cpuinfo_init+0x0/0x1a returned 0 after 0 usecs [ 4.336012] calling proc_devices_init+0x0/0x1a @ 1 [ 4.340014] initcall proc_devices_init+0x0/0x1a returned 0 after 0 usecs [ 4.344012] calling proc_interrupts_init+0x0/0x1a @ 1 [ 4.348014] initcall proc_interrupts_init+0x0/0x1a returned 0 after 0 usecs [ 4.352012] calling proc_loadavg_init+0x0/0x1a @ 1 [ 4.356014] initcall proc_loadavg_init+0x0/0x1a returned 0 after 0 usecs [ 4.360012] calling proc_meminfo_init+0x0/0x1a @ 1 [ 4.364014] initcall proc_meminfo_init+0x0/0x1a returned 0 after 0 usecs [ 4.368012] calling proc_stat_init+0x0/0x1a @ 1 [ 4.372014] initcall proc_stat_init+0x0/0x1a returned 0 after 0 usecs [ 4.376012] calling proc_uptime_init+0x0/0x1a @ 1 [ 4.380014] initcall proc_uptime_init+0x0/0x1a returned 0 after 0 usecs [ 4.384012] calling proc_version_init+0x0/0x1a @ 1 [ 4.388014] initcall proc_version_init+0x0/0x1a returned 0 after 0 usecs [ 4.392012] calling proc_softirqs_init+0x0/0x1a @ 1 [ 4.396014] initcall proc_softirqs_init+0x0/0x1a returned 0 after 0 usecs [ 4.400012] calling proc_kcore_init+0x0/0x9e @ 1 [ 4.404015] initcall proc_kcore_init+0x0/0x9e returned 0 after 0 usecs [ 4.408012] calling proc_kmsg_init+0x0/0x1d @ 1 [ 4.412014] initcall proc_kmsg_init+0x0/0x1d returned 0 after 0 usecs [ 4.416012] calling proc_page_init+0x0/0x36 @ 1 [ 4.420017] initcall proc_page_init+0x0/0x36 returned 0 after 0 usecs [ 4.424012] calling init_devpts_fs+0x0/0x39 @ 1 [ 4.428023] initcall init_devpts_fs+0x0/0x39 returned 0 after 0 usecs [ 4.432012] calling init_ramfs_fs+0x0/0xa @ 1 [ 4.436013] initcall init_ramfs_fs+0x0/0xa returned 0 after 0 usecs [ 4.440012] calling init_hugetlbfs_fs+0x0/0x7c @ 1 [ 4.444069] initcall init_hugetlbfs_fs+0x0/0x7c returned 0 after 0 usecs [ 4.448013] calling ipc_init+0x0/0x1c @ 1 [ 4.452017] msgmni has been set to 1632 [ 4.456017] initcall ipc_init+0x0/0x1c returned 0 after 3906 usecs [ 4.460012] calling ipc_sysctl_init+0x0/0xd @ 1 [ 4.464047] initcall ipc_sysctl_init+0x0/0xd returned 0 after 0 usecs [ 4.468012] calling init_mqueue_fs+0x0/0x93 @ 1 [ 4.472087] initcall init_mqueue_fs+0x0/0x93 returned 0 after 0 usecs [ 4.476013] calling key_proc_init+0x0/0x4a @ 1 [ 4.480016] initcall key_proc_init+0x0/0x4a returned 0 after 0 usecs [ 4.484012] calling selinux_nf_ip_init+0x0/0x50 @ 1 [ 4.488013] initcall selinux_nf_ip_init+0x0/0x50 returned 0 after 0 usecs [ 4.492012] calling init_sel_fs+0x0/0x53 @ 1 [ 4.496013] initcall init_sel_fs+0x0/0x53 returned 0 after 0 usecs [ 4.500012] calling selnl_init+0x0/0x42 @ 1 [ 4.504017] initcall selnl_init+0x0/0x42 returned 0 after 0 usecs [ 4.508012] calling sel_netif_init+0x0/0x53 @ 1 [ 4.512012] initcall sel_netif_init+0x0/0x53 returned 0 after 0 usecs [ 4.516013] calling sel_netnode_init+0x0/0x5c @ 1 [ 4.520013] initcall sel_netnode_init+0x0/0x5c returned 0 after 0 usecs [ 4.524012] calling sel_netport_init+0x0/0x5c @ 1 [ 4.528013] initcall sel_netport_init+0x0/0x5c returned 0 after 0 usecs [ 4.532013] calling aurule_init+0x0/0x2c @ 1 [ 4.536013] initcall aurule_init+0x0/0x2c returned 0 after 0 usecs [ 4.540012] calling crypto_wq_init+0x0/0x25 @ 1 [ 4.544029] initcall crypto_wq_init+0x0/0x25 returned 0 after 0 usecs [ 4.548014] calling crypto_algapi_init+0x0/0x8 @ 1 [ 4.552022] initcall crypto_algapi_init+0x0/0x8 returned 0 after 0 usecs [ 4.556013] calling skcipher_module_init+0x0/0x25 @ 1 [ 4.560013] initcall skcipher_module_init+0x0/0x25 returned 0 after 0 usecs [ 4.564012] calling chainiv_module_init+0x0/0xa @ 1 [ 4.568014] initcall chainiv_module_init+0x0/0xa returned 0 after 0 usecs [ 4.572012] calling eseqiv_module_init+0x0/0xa @ 1 [ 4.576013] initcall eseqiv_module_init+0x0/0xa returned 0 after 0 usecs [ 4.580013] calling md5_mod_init+0x0/0xa @ 1 [ 4.584049] initcall md5_mod_init+0x0/0xa returned 0 after 0 usecs [ 4.588014] calling krng_mod_init+0x0/0xa @ 1 [ 4.592023] alg: No test for stdrng (krng) [ 4.596015] initcall krng_mod_init+0x0/0xa returned 0 after 3906 usecs [ 4.600013] calling proc_genhd_init+0x0/0x30 @ 1 [ 4.604016] initcall proc_genhd_init+0x0/0x30 returned 0 after 0 usecs [ 4.608012] calling bsg_init+0x0/0x107 @ 1 [ 4.612066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.616013] initcall bsg_init+0x0/0x107 returned 0 after 3906 usecs [ 4.620012] calling noop_init+0x0/0xd @ 1 [ 4.624013] io scheduler noop registered [ 4.628014] initcall noop_init+0x0/0xd returned 0 after 3906 usecs [ 4.632013] calling as_init+0x0/0xd @ 1 [ 4.636011] io scheduler anticipatory registered [ 4.640013] initcall as_init+0x0/0xd returned 0 after 3906 usecs [ 4.644013] calling deadline_init+0x0/0xd @ 1 [ 4.648012] io scheduler deadline registered [ 4.652013] initcall deadline_init+0x0/0xd returned 0 after 3906 usecs [ 4.656013] calling cfq_init+0x0/0x84 @ 1 [ 4.660055] io scheduler cfq registered (default) [ 4.664013] initcall cfq_init+0x0/0x84 returned 0 after 3906 usecs [ 4.668013] calling percpu_counter_startup+0x0/0x2c @ 1 [ 4.672013] initcall percpu_counter_startup+0x0/0x2c returned 0 after 0 usecs [ 4.676013] calling audit_classes_init+0x0/0x4b @ 1 [ 4.680016] initcall audit_classes_init+0x0/0x4b returned 0 after 0 usecs [ 4.684013] calling pci_proc_init+0x0/0x55 @ 1 [ 4.688073] initcall pci_proc_init+0x0/0x55 returned 0 after 0 usecs [ 4.692013] calling pcie_portdrv_init+0x0/0x3b @ 1 [ 4.696095] initcall pcie_portdrv_init+0x0/0x3b returned 0 after 0 usecs [ 4.700013] calling aer_service_init+0x0/0x22 @ 1 [ 4.708014] initcall aer_service_init+0x0/0x22 returned 0 after 3906 usecs [ 4.712013] calling pcifront_init+0x0/0x42 @ 1 [ 4.716014] initcall pcifront_init+0x0/0x42 returned -19 after 0 usecs [ 4.720013] calling fb_console_init+0x0/0xf6 @ 1 [ 4.724040] initcall fb_console_init+0x0/0xf6 returned 0 after 0 usecs [ 4.728013] calling xenfb_init+0x0/0x4b @ 1 [ 4.732014] initcall xenfb_init+0x0/0x4b returned -19 after 0 usecs [ 4.736013] calling vesafb_init+0x0/0x1f3 @ 1 [ 4.740045] initcall vesafb_init+0x0/0x1f3 returned 0 after 0 usecs [ 4.744013] calling efifb_init+0x0/0x1af @ 1 [ 4.748029] initcall efifb_init+0x0/0x1af returned -19 after 0 usecs [ 4.752013] calling acpi_reserve_resources+0x0/0xc4 @ 1 [ 4.756014] initcall acpi_reserve_resources+0x0/0xc4 returned 0 after 0 usecs [ 4.760014] calling irqrouter_init_sysfs+0x0/0x2d @ 1 [ 4.764014] initcall irqrouter_init_sysfs+0x0/0x2d returned 0 after 0 usecs [ 4.768013] calling pnpbios_thread_init+0x0/0x47 @ 1 [ 4.772024] initcall pnpbios_thread_init+0x0/0x47 returned 0 after 0 usecs [ 4.776015] calling isapnp_init+0x0/0x61b @ 1 [ 4.780023] isapnp: Scanning for PnP cards... [ 5.141524] isapnp: No Plug & Play device found [ 5.144014] initcall isapnp_init+0x0/0x61b returned 0 after 355469 usecs [ 5.148014] calling xenbus_probe_initcall+0x0/0x33 @ 1 [ 5.152014] initcall xenbus_probe_initcall+0x0/0x33 returned -19 after 0 usecs [ 5.156013] calling gntdev_init+0x0/0x2e @ 1 [ 5.160014] initcall gntdev_init+0x0/0x2e returned -19 after 0 usecs [ 5.164013] calling pciback_init+0x0/0x10c @ 1 [ 5.168014] initcall pciback_init+0x0/0x10c returned -19 after 0 usecs [ 5.172013] calling blkif_init+0x0/0x12e @ 1 [ 5.176014] initcall blkif_init+0x0/0x12e returned -19 after 0 usecs [ 5.180013] calling netback_init+0x0/0x32c @ 1 [ 5.184014] initcall netback_init+0x0/0x32c returned -19 after 0 usecs [ 5.188013] calling hypervisor_subsys_init+0x0/0x1d @ 1 [ 5.192014] initcall hypervisor_subsys_init+0x0/0x1d returned -19 after 0 usecs [ 5.196013] calling hyper_sysfs_init+0x0/0xc0 @ 1 [ 5.200014] initcall hyper_sysfs_init+0x0/0xc0 returned -19 after 0 usecs [ 5.204013] calling platform_pci_module_init+0x0/0x20 @ 1 [ 5.208014] initcall platform_pci_module_init+0x0/0x20 returned -19 after 0 usecs [ 5.212016] calling rand_initialize+0x0/0x21 @ 1 [ 5.216028] initcall rand_initialize+0x0/0x21 returned 0 after 0 usecs [ 5.220013] calling tty_init+0x0/0xd4 @ 1 [ 5.225519] initcall tty_init+0x0/0xd4 returned 0 after 0 usecs [ 5.228014] calling pty_init+0x0/0x295 @ 1 [ 5.232063] initcall pty_init+0x0/0x295 returned 0 after 0 usecs [ 5.236015] calling sysrq_init+0x0/0x1d @ 1 [ 5.240018] initcall sysrq_init+0x0/0x1d returned 0 after 0 usecs [ 5.244013] calling xen_hvc_init+0x0/0xc4 @ 1 [ 5.248014] initcall xen_hvc_init+0x0/0xc4 returned -19 after 0 usecs [ 5.252013] calling init+0x0/0xa @ 1 [ 5.256029] initcall init+0x0/0xa returned 0 after 0 usecs [ 5.260014] calling hpet_init+0x0/0x53 @ 1 [ 5.264079] initcall hpet_init+0x0/0x53 returned -19 after 0 usecs [ 5.268014] calling agp_init+0x0/0x1d @ 1 [ 5.272013] Linux agpgart interface v0.103 [ 5.276014] initcall agp_init+0x0/0x1d returned 0 after 3906 usecs [ 5.280014] calling agp_ali_init+0x0/0x20 @ 1 [ 5.284031] initcall agp_ali_init+0x0/0x20 returned 0 after 0 usecs [ 5.288014] calling agp_ati_init+0x0/0x20 @ 1 [ 5.292030] initcall agp_ati_init+0x0/0x20 returned 0 after 0 usecs [ 5.296015] calling agp_amdk7_init+0x0/0x20 @ 1 [ 5.300031] initcall agp_amdk7_init+0x0/0x20 returned 0 after 0 usecs [ 5.304015] calling agp_amd64_init+0x0/0x93 @ 1 [ 5.308038] initcall agp_amd64_init+0x0/0x93 returned -19 after 0 usecs [ 5.312014] calling agp_efficeon_init+0x0/0x35 @ 1 [ 5.316030] initcall agp_efficeon_init+0x0/0x35 returned 0 after 0 usecs [ 5.320015] calling agp_intel_init+0x0/0x20 @ 1 [ 5.324034] initcall agp_intel_init+0x0/0x20 returned 0 after 0 usecs [ 5.328014] calling agp_nvidia_init+0x0/0x20 @ 1 [ 5.332030] initcall agp_nvidia_init+0x0/0x20 returned 0 after 0 usecs [ 5.336015] calling agp_sis_init+0x0/0x20 @ 1 [ 5.340032] initcall agp_sis_init+0x0/0x20 returned 0 after 0 usecs [ 5.344014] calling agp_serverworks_init+0x0/0x20 @ 1 [ 5.348031] initcall agp_serverworks_init+0x0/0x20 returned 0 after 0 usecs [ 5.352014] calling agp_via_init+0x0/0x20 @ 1 [ 5.356032] initcall agp_via_init+0x0/0x20 returned 0 after 0 usecs [ 5.360014] calling serial8250_init+0x0/0x10d @ 1 [ 5.364015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.368101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.372108] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.376143] initcall serial8250_init+0x0/0x10d returned 0 after 11718 usecs [ 5.380014] calling serial8250_pnp_init+0x0/0xa @ 1 [ 5.388175] 00:11: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.392154] 00:12: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.396058] initcall serial8250_pnp_init+0x0/0xa returned 0 after 11718 usecs [ 5.400014] calling serial8250_pci_init+0x0/0x11 @ 1 [ 5.404044] initcall serial8250_pci_init+0x0/0x11 returned 0 after 0 usecs [ 5.408014] calling isa_bus_init+0x0/0x2f @ 1 [ 5.412037] initcall isa_bus_init+0x0/0x2f returned 0 after 0 usecs [ 5.416016] calling topology_sysfs_init+0x0/0x40 @ 1 [ 5.420040] initcall topology_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 5.424015] calling net_olddevs_init+0x0/0x7e @ 1 [ 5.428020] initcall net_olddevs_init+0x0/0x7e returned 0 after 0 usecs [ 5.432014] calling i8042_init+0x0/0x343 @ 1 [ 5.436063] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 [ 5.440013] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.444507] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.448029] initcall i8042_init+0x0/0x343 returned 0 after 11718 usecs [ 5.452014] calling mousedev_init+0x0/0x72 @ 1 [ 5.456072] mice: PS/2 mouse device common for all mice [ 5.460015] initcall mousedev_init+0x0/0x72 returned 0 after 3906 usecs [ 5.464014] calling atkbd_init+0x0/0x1b @ 1 [ 5.468038] initcall atkbd_init+0x0/0x1b returned 0 after 0 usecs [ 5.472014] calling xenkbd_init+0x0/0x4b @ 1 [ 5.476015] initcall xenkbd_init+0x0/0x4b returned -19 after 0 usecs [ 5.480014] calling cmos_init+0x0/0x5a @ 1 [ 5.484060] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.488033] rtc0: alarms up to one day, 114 bytes nvram [ 5.492031] initcall cmos_init+0x0/0x5a returned 0 after 7812 usecs [ 5.496015] calling init_ladder+0x0/0xa @ 1 [ 5.500015] cpuidle: using governor ladder [ 5.504015] initcall init_ladder+0x0/0xa returned 0 after 3906 usecs [ 5.508014] calling init_menu+0x0/0xa @ 1 [ 5.512014] cpuidle: using governor menu [ 5.516014] initcall init_menu+0x0/0xa returned 0 after 3906 usecs [ 5.520014] calling ledtrig_ide_init+0x0/0x12 @ 1 [ 5.524015] initcall ledtrig_ide_init+0x0/0x12 returned 0 after 0 usecs [ 5.528015] calling ibft_init+0x0/0x4e9 @ 1 [ 5.532028] No iBFT detected. [ 5.536015] initcall ibft_init+0x0/0x4e9 returned 0 after 3906 usecs [ 5.540014] calling staging_init+0x0/0x3 @ 1 [ 5.544014] initcall staging_init+0x0/0x3 returned 0 after 0 usecs [ 5.548015] calling flow_cache_init+0x0/0x14d @ 1 [ 5.552048] initcall flow_cache_init+0x0/0x14d returned 0 after 0 usecs [ 5.556014] calling llc_init+0x0/0x17 @ 1 [ 5.560015] initcall llc_init+0x0/0x17 returned 0 after 0 usecs [ 5.564014] calling snap_init+0x0/0x2d @ 1 [ 5.568015] initcall snap_init+0x0/0x2d returned 0 after 0 usecs [ 5.572014] calling rif_init+0x0/0x68 @ 1 [ 5.576034] initcall rif_init+0x0/0x68 returned 0 after 0 usecs [ 5.580014] calling blackhole_module_init+0x0/0xa @ 1 [ 5.584016] initcall blackhole_module_init+0x0/0xa returned 0 after 0 usecs [ 5.588014] calling init_cgroup_cls+0x0/0xa @ 1 [ 5.592015] initcall init_cgroup_cls+0x0/0xa returned 0 after 0 usecs [ 5.596022] calling sysctl_ipv4_init+0x0/0x3b @ 1 [ 5.600382] initcall sysctl_ipv4_init+0x0/0x3b returned 0 after 0 usecs [ 5.604014] calling init_syncookies+0x0/0x12 @ 1 [ 5.608070] initcall init_syncookies+0x0/0x12 returned 0 after 0 usecs [ 5.612015] calling ipv4_netfilter_init+0x0/0xa @ 1 [ 5.616016] initcall ipv4_netfilter_init+0x0/0xa returned 0 after 0 usecs [ 5.620016] calling cubictcp_register+0x0/0x6c @ 1 [ 5.624014] TCP cubic registered [ 5.628015] initcall cubictcp_register+0x0/0x6c returned 0 after 3906 usecs [ 5.632014] calling inet6_init+0x0/0x28d @ 1 [ 5.636158] NET: Registered protocol family 10 [ 5.640606] lo: Disabled Privacy Extensions [ 5.644419] initcall inet6_init+0x0/0x28d returned 0 after 7812 usecs [ 5.648015] calling mip6_init+0x0/0xa2 @ 1 [ 5.652012] Mobile IPv6 [ 5.654512] initcall mip6_init+0x0/0xa2 returned 0 after 0 usecs [ 5.656014] calling packet_init+0x0/0x35 @ 1 [ 5.660013] NET: Registered protocol family 17 [ 5.664017] initcall packet_init+0x0/0x35 returned 0 after 3906 usecs [ 5.668014] calling dcbnl_init+0x0/0x2b @ 1 [ 5.672014] initcall dcbnl_init+0x0/0x2b returned 0 after 0 usecs [ 5.676015] calling mce_debugfs_init+0x0/0x31 @ 1 [ 5.680023] initcall mce_debugfs_init+0x0/0x31 returned 0 after 0 usecs [ 5.684014] calling severities_debugfs_init+0x0/0x31 @ 1 [ 5.688017] initcall severities_debugfs_init+0x0/0x31 returned 0 after 0 usecs [ 5.692015] calling hpet_insert_resource+0x0/0x1a @ 1 [ 5.696015] initcall hpet_insert_resource+0x0/0x1a returned 1 after 0 usecs [ 5.700015] initcall hpet_insert_resource+0x0/0x1a returned with error code 1 [ 5.704016] calling update_mp_table+0x0/0x564 @ 1 [ 5.708015] initcall update_mp_table+0x0/0x564 returned 0 after 0 usecs [ 5.712015] calling lapic_insert_resource+0x0/0x41 @ 1 [ 5.716018] initcall lapic_insert_resource+0x0/0x41 returned 0 after 0 usecs [ 5.720014] calling print_ipi_mode+0x0/0x24 @ 1 [ 5.724013] Using IPI No-Shortcut mode [ 5.728015] initcall print_ipi_mode+0x0/0x24 returned 0 after 3906 usecs [ 5.732015] calling init_lapic_nmi_sysfs+0x0/0x2d @ 1 [ 5.736015] initcall init_lapic_nmi_sysfs+0x0/0x2d returned 0 after 0 usecs [ 5.740015] calling io_apic_bug_finalize+0x0/0x16 @ 1 [ 5.744015] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs [ 5.748016] calling check_early_ioremap_leak+0x0/0x58 @ 1 [ 5.752015] initcall check_early_ioremap_leak+0x0/0x58 returned 0 after 0 usecs [ 5.756014] calling pat_memtype_list_init+0x0/0x21 @ 1 [ 5.760018] initcall pat_memtype_list_init+0x0/0x21 returned 0 after 0 usecs [ 5.764015] calling sched_init_debug+0x0/0x1d @ 1 [ 5.768017] initcall sched_init_debug+0x0/0x1d returned 0 after 0 usecs [ 5.772018] calling init_oops_id+0x0/0x36 @ 1 [ 5.776020] initcall init_oops_id+0x0/0x36 returned 0 after 0 usecs [ 5.780015] calling disable_boot_consoles+0x0/0x37 @ 1 [ 5.784015] initcall disable_boot_consoles+0x0/0x37 returned 0 after 0 usecs [ 5.788015] calling pm_qos_power_init+0x0/0xa8 @ 1 [ 5.792088] initcall pm_qos_power_init+0x0/0xa8 returned 0 after 0 usecs [ 5.796017] calling software_resume+0x0/0x1d1 @ 1 [ 5.800014] PM: Resume from disk failed. [ 5.804015] initcall software_resume+0x0/0x1d1 returned -2 after 3906 usecs [ 5.808015] initcall software_resume+0x0/0x1d1 returned with error code -2 [ 5.812016] calling debugfs_kprobe_init+0x0/0x74 @ 1 [ 5.816038] initcall debugfs_kprobe_init+0x0/0x74 returned 0 after 0 usecs [ 5.820016] calling taskstats_init+0x0/0x76 @ 1 [ 5.824019] registered taskstats version 1 [ 5.828015] initcall taskstats_init+0x0/0x76 returned 0 after 3906 usecs [ 5.832015] calling clear_boot_tracer+0x0/0x23 @ 1 [ 5.836015] initcall clear_boot_tracer+0x0/0x23 returned 0 after 0 usecs [ 5.840015] calling max_swapfiles_check+0x0/0x3 @ 1 [ 5.844015] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs [ 5.848015] calling random32_reseed+0x0/0x84 @ 1 [ 5.852048] initcall random32_reseed+0x0/0x84 returned 0 after 0 usecs [ 5.856015] calling pci_resource_alignment_sysfs_init+0x0/0xf @ 1 [ 5.860018] initcall pci_resource_alignment_sysfs_init+0x0/0xf returned 0 after 0 usecs [ 5.864014] calling pci_sysfs_init+0x0/0x40 @ 1 [ 5.868305] initcall pci_sysfs_init+0x0/0x40 returned 0 after 0 usecs [ 5.872015] calling boot_wait_for_devices+0x0/0x2b @ 1 [ 5.876017] initcall boot_wait_for_devices+0x0/0x2b returned 0 after 0 usecs [ 5.880015] calling regulator_init_complete+0x0/0xe8 @ 1 [ 5.884015] initcall regulator_init_complete+0x0/0xe8 returned 0 after 0 usecs [ 5.888014] calling seqgen_init+0x0/0xa @ 1 [ 5.892035] initcall seqgen_init+0x0/0xa returned 0 after 0 usecs [ 5.896015] calling rtc_hctosys+0x0/0x11a @ 1 [ 5.900040] rtc_cmos 00:05: setting system clock to 2010-11-22 22:08:44 UTC (1290463724) [ 5.904015] initcall rtc_hctosys+0x0/0x11a returned 0 after 3906 usecs [ 5.908015] calling memmap_init+0x0/0x7e @ 1 [ 5.912057] initcall memmap_init+0x0/0x7e returned 0 after 0 usecs [ 5.916015] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1 [ 5.920016] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 1 after 0 usecs [ 5.924015] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned with error code 1 [ 5.928015] calling init_net_drop_monitor+0x0/0x107 @ 1 [ 5.932013] Initalizing network drop monitor service [ 5.936027] initcall init_net_drop_monitor+0x0/0x107 returned 0 after 3906 usecs [ 5.940015] calling tcp_congestion_default+0x0/0xa @ 1 [ 5.944016] initcall tcp_congestion_default+0x0/0xa returned 0 after 0 usecs [ 5.948015] calling initialize_hashrnd+0x0/0x12 @ 1 [ 5.952020] initcall initialize_hashrnd+0x0/0x12 returned 0 after 0 usecs [ 5.956021] async_waiting @ 1 [ 5.960014] async_continuing @ 1 after 0 usec [ 5.964025] Freeing unused kernel memory: 396k freed [ 5.972382] Write protecting the kernel text: 2592k [ 5.976058] Write protecting the kernel read-only data: 924k Loading, please wait... [ 6.005975] udev[70]: starting version 164 [ 6.068015] calling usb_init+0x0/0x17a [usbcore] @ 82 [ 6.072197] usbcore: registered new interface driver usbfs [ 6.080066] usbcore: registered new interface driver hub [ 6.084361] usbcore: registered new device driver usb [ 6.088040] initcall usb_init+0x0/0x17a [usbcore] returned 0 after 15625 usecs [ 6.092716] calling init_scsi+0x0/0x73 [scsi_mod] @ 123 [ 6.093583] SCSI subsystem initialized [ 6.093601] initcall init_scsi+0x0/0x73 [scsi_mod] returned 0 after 0 usecs [ 6.108012] calling e1000_init_module+0x0/0x6b [e1000] @ 124 [ 6.108012] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 6.108012] Copyright (c) 1999-2006 Intel Corporation. [ 6.108012] querying PCI -> IRQ mapping bus:2, slot:3, pin:0. [ 6.108012] IOAPIC[2]: Set routing entry (4-6 -> 0x61 -> IRQ 54 Mode:1 Active:1) [ 6.108012] e1000 0000:02:03.0: PCI->APIC IRQ transform: INT A -> IRQ 54 [ 6.108012] calling ide_init+0x0/0x64 [ide_core] @ 116 [ 6.108012] Uniform Multi-Platform E-IDE driver [ 6.108456] initcall ide_init+0x0/0x64 [ide_core] returned 0 after 0 usecs [ 6.111380] calling spi_transport_init+0x0/0x60 [scsi_transport_spi] @ 145 [ 6.111425] initcall spi_transport_init+0x0/0x60 [scsi_transport_spi] returned 0 after 0 usecs [ 6.117015] calling ahd_linux_init+0x0/0x21d [aic79xx] @ 145 [ 6.117107] querying PCI -> IRQ mapping bus:3, slot:2, pin:0. [ 6.117117] IOAPIC[1]: Set routing entry (3-4 -> 0x69 -> IRQ 28 Mode:1 Active:1) [ 6.117124] aic79xx 0000:03:02.0: PCI->APIC IRQ transform: INT A -> IRQ 28 [ 6.122771] calling floppy_module_init+0x0/0xcca [floppy] @ 149 [ 6.123067] Floppy drive(s): fd0 is 1.44M [ 6.151598] calling ata_init+0x0/0x2bc [libata] @ 123 [ 6.152971] calling piix_ide_init+0x0/0x9e [piix] @ 116 [ 6.153012] piix 0000:00:1f.1: IDE controller (0x8086:0x248b rev 0x02) [ 6.153026] querying PCI -> IRQ mapping bus:0, slot:31, pin:0. [ 6.153062] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 6.153071] ide0: BM-DMA at 0x2060-0x2067 [ 6.153082] ide1: BM-DMA at 0x2068-0x206f [ 6.153091] Probing IDE interface ide0... [ 6.162177] libata version 3.00 loaded. [ 6.162200] initcall ata_init+0x0/0x2bc [libata] returned 0 after 11718 usecs [ 6.168055] calling mv_init+0x0/0x39 [sata_mv] @ 123 [ 6.236005] FDC 0 is a post-1991 82077 [ 6.240739] initcall floppy_module_init+0x0/0xcca [floppy] returned 0 after 117187 usecs [ 6.296091] calling ehci_hcd_init+0x0/0x65 [ehci_hcd] @ 91 [ 6.301436] calling uhci_hcd_init+0x0/0xa1 [uhci_hcd] @ 82 [ 6.301441] uhci_hcd: USB Universal Host Controller Interface driver [ 6.312017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.320013] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 6.328057] initcall ehci_hcd_init+0x0/0x65 [ehci_hcd] returned 0 after 15625 usecs [ 6.384024] e1000: 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d2 [ 6.432014] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 6.440031] sata_mv 0000:02:01.0: version 1.28 [ 6.444123] querying PCI -> IRQ mapping bus:2, slot:1, pin:0. [ 6.448023] IOAPIC[2]: Set routing entry (4-0 -> 0x71 -> IRQ 48 Mode:1 Active:1) [ 6.452017] sata_mv 0000:02:01.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 6.456155] sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx [ 6.464166] scsi1 : sata_mv [ 6.467113] scsi2 : sata_mv [ 6.468112] scsi3 : sata_mv [ 6.472111] scsi4 : sata_mv [ 6.476109] scsi5 : sata_mv [ 6.478982] scsi6 : sata_mv [ 6.480105] scsi7 : sata_mv [ 6.484172] scsi8 : sata_mv [ 6.488081] ata1: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000 irq 48 [ 6.492016] ata2: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000 irq 48 [ 6.496019] ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000 irq 48 [ 6.500017] ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000 irq 48 [ 6.504016] ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000 irq 48 [ 6.508015] ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000 irq 48 [ 6.512015] ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000 irq 48 [ 6.516016] ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000 irq 48 [ 6.520052] querying PCI -> IRQ mapping bus:2, slot:3, pin:1. [ 6.520128] initcall mv_init+0x0/0x39 [sata_mv] returned 0 after 343750 usecs [ 6.536021] IOAPIC[2]: Set routing entry (4-7 -> 0x79 -> IRQ 55 Mode:1 Active:1) [ 6.540017] e1000 0000:02:03.1: PCI->APIC IRQ transform: INT B -> IRQ 55 [ 6.720069] Probing IDE interface ide1... [ 6.824015] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d3 [ 6.872015] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 6.880075] initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after 753906 usecs [ 7.000046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.024051] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133 [ 7.032016] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.064052] ata1.00: configured for UDMA/133 [ 7.068102] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5 [ 7.464179] hdc: CD-224E, ATAPI CD/DVD-ROM drive [ 7.556040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.580051] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133 [ 7.588018] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.620051] ata2.00: configured for UDMA/133 [ 7.624064] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5 [ 7.956037] ata3: SATA link down (SStatus 0 SControl 300) [ 8.144069] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 8.152614] hdc: UDMA/33 mode selected [ 8.156612] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8.160269] ide1 at 0x170-0x177,0x376 on irq 15 [ 8.168116] querying PCI -> IRQ mapping bus:0, slot:29, pin:0. [ 8.168116] initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 1968750 usecs [ 8.172019] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) [ 8.176016] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 8.180024] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.184017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.188047] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 8.192041] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002000 [ 8.196063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.200016] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.204014] usb usb1: Product: UHCI Host Controller [ 8.208014] usb usb1: Manufacturer: Linux 2.6.32.25 uhci_hcd [ 8.212015] usb usb1: SerialNumber: 0000:00:1d.0 [ 8.216142] usb usb1: configuration #1 chosen from 1 choice [ 8.220084] hub 1-0:1.0: USB hub found [ 8.224024] hub 1-0:1.0: 2 ports detected [ 8.228074] querying PCI -> IRQ mapping bus:0, slot:29, pin:1. [ 8.232017] IOAPIC[0]: Set routing entry (2-19 -> 0x59 -> IRQ 19 Mode:1 Active:1) [ 8.236017] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 8.240019] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.244015] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.248021] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 8.252040] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020 [ 8.256073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.260015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.264014] usb usb2: Product: UHCI Host Controller [ 8.268014] usb usb2: Manufacturer: Linux 2.6.32.25 uhci_hcd [ 8.272015] usb usb2: SerialNumber: 0000:00:1d.1 [ 8.276099] usb usb2: configuration #1 chosen from 1 choice [ 8.280051] hub 2-0:1.0: USB hub found [ 8.284023] hub 2-0:1.0: 2 ports detected [ 8.284039] ata4: SATA link down (SStatus 0 SControl 300) [ 8.288071] querying PCI -> IRQ mapping bus:0, slot:29, pin:2. [ 8.292019] IOAPIC[0]: Set routing entry (2-18 -> 0x51 -> IRQ 18 Mode:1 Active:1) [ 8.296016] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 8.300019] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.304015] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.308023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 8.312038] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 [ 8.316055] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.320015] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.324015] usb usb3: Product: UHCI Host Controller [ 8.328018] usb usb3: Manufacturer: Linux 2.6.32.25 uhci_hcd [ 8.332015] usb usb3: SerialNumber: 0000:00:1d.2 [ 8.336128] usb usb3: configuration #1 chosen from 1 choice [ 8.340056] hub 3-0:1.0: USB hub found [ 8.344021] hub 3-0:1.0: 2 ports detected [ 8.348088] initcall uhci_hcd_init+0x0/0xa1 [uhci_hcd] returned 0 after 2000000 usecs [ 8.604040] ata5: SATA link down (SStatus 0 SControl 300) [ 8.932037] ata6: SATA link down (SStatus 0 SControl 300) [ 9.260062] ata7: SATA link down (SStatus 0 SControl 300) [ 9.588037] ata8: SATA link down (SStatus 0 SControl 300) [ 9.599323] calling piix_init+0x0/0x23 [ata_piix] @ 116 [ 9.604086] initcall piix_init+0x0/0x23 [ata_piix] returned 0 after 0 usecs [ 9.605372] calling init_sd+0x0/0x127 [sd_mod] @ 182 [ 9.608633] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.608633] sd 1:0:0:0: [sda] Write Protect is off [ 9.608633] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.608633] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.608963] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.608963] sda: [ 9.608963] sd 2:0:0:0: [sdb] Write Protect is off [ 9.608963] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.608963] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.608963] sdb:initcall init_sd+0x0/0x127 [sd_mod] returned 0 after 0 usecs [ 9.616043] sdb1 sdb2 sdb3 sdb4 [ 9.683983] sda1 [ 9.684547] sd 2:0:0:0: [sdb] Attached SCSI disk [ 9.692023] sda2 sda3 sda4 [ 9.696013] sd 1:0:0:0: [sda] Attached SCSI disk [ 9.701824] calling ata_generic_init+0x0/0x14 [ata_generic] @ 116 [ 9.708068] initcall ata_generic_init+0x0/0x14 [ata_generic] returned 0 after 0 usecs [ 9.741692] calling cdrom_init+0x0/0x57 [cdrom] @ 186 [ 9.744069] initcall cdrom_init+0x0/0x57 [cdrom] returned 0 after 0 usecs [ 9.754637] calling ide_cdrom_init+0x0/0x15 [ide_cd_mod] @ 186 [ 9.756029] ide-cd driver 5.00 [ 9.760033] ide-cd: hdc: ATAPI 24X CD-ROM drive, 128kB Cache [ 9.766636] Uniform CD-ROM driver Revision: 3.20 [ 9.784201] initcall ide_cdrom_init+0x0/0x15 [ide_cd_mod] returned 0 after 27343 usecs [ 21.240030] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 21.240033] <Adaptec AIC7902 Ultra320 SCSI adapter> [ 21.240034] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs [ 21.260155] querying PCI -> IRQ mapping bus:3, slot:2, pin:1. [ 21.268021] IOAPIC[1]: Set routing entry (3-5 -> 0x81 -> IRQ 29 Mode:1 Active:1) [ 21.276017] aic79xx 0000:03:02.1: PCI->APIC IRQ transform: INT B -> IRQ 29 [ 36.404024] scsi9 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 [ 36.404026] <Adaptec AIC7902 Ultra320 SCSI adapter> [ 36.404027] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs [ 36.428080] initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after 29597656 usecs [ 36.520018] calling wait_scan_init+0x0/0x8 [scsi_wait_scan] @ 212 [ 36.524023] initcall wait_scan_init+0x0/0x8 [scsi_wait_scan] returned 0 after 0 usecs [ 36.566415] calling md_init+0x0/0xb8 [md_mod] @ 225 [ 36.572066] initcall md_init+0x0/0xb8 [md_mod] returned 0 after 0 usecs [ 36.581760] calling raid_init+0x0/0xa [raid1] @ 225 [ 36.588016] md: raid1 personality registered for level 1 [ 36.592017] initcall raid_init+0x0/0xa [raid1] returned 0 after 3906 usecs [ 36.652158] md: md0 stopped. [ 36.656576] md: bind<sdb1> [ 36.660897] md: bind<sda1> [ 36.665424] raid1: raid set md0 active with 2 out of 2 mirrors [ 36.672106] md0: detected capacity change from 0 to 501612544 [ 36.677236] md0: unknown partition table [ 36.715028] md: md1 stopped. [ 36.716441] md: bind<sdb2> [ 36.721260] md: bind<sda2> [ 36.725221] raid1: raid set md1 active with 2 out of 2 mirrors [ 36.728062] md1: detected capacity change from 0 to 1003356160 [ 36.737197] md1: unknown partition table [ 36.814921] md: md2 stopped. [ 36.816208] md: bind<sdb3> [ 36.821163] md: bind<sda3> [ 36.825197] raid1: raid set md2 active with 2 out of 2 mirrors [ 36.832050] md2: detected capacity change from 0 to 29997465600 [ 36.841233] md2: unknown partition table [ 36.880321] md: md3 stopped. [ 36.884144] md: bind<sdb4> [ 36.888077] md: bind<sda4> [ 36.892116] raid1: raid set md3 active with 2 out of 2 mirrors [ 36.896056] md3: detected capacity change from 0 to 968699346944 [ 36.904844] md3: unknown partition table [ 36.917794] calling dm_init+0x0/0x37 [dm_mod] @ 257 [ 36.920297] device-mapper: uevent: version 1.0.3 [ 36.928352] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 36.932028] initcall dm_init+0x0/0x37 [dm_mod] returned 0 after 11718 usecs [ 37.078538] calling dm_crypt_init+0x0/0x54 [dm_crypt] @ 265 [ 37.084063] initcall dm_crypt_init+0x0/0x54 [dm_crypt] returned 0 after 0 usecs [ 61.360331] calling crypto_module_init+0x0/0xa [xts] @ 277 [ 61.364020] initcall crypto_module_init+0x0/0xa [xts] returned 0 after 0 usecs [ 61.372806] calling serpent_mod_init+0x0/0x2f [serpent] @ 279 [ 61.380080] initcall serpent_mod_init+0x0/0x2f [serpent] returned 0 after 0 usecs [ 61.393110] alg: No test for xts(serpent) (xts(serpent-generic)) [ 62.182573] calling init_mbcache+0x0/0xd [mbcache] @ 328 [ 62.192023] initcall init_mbcache+0x0/0xd [mbcache] returned 0 after 0 usecs [ 62.200602] calling journal_init+0x0/0x81 [jbd] @ 328 [ 62.208341] initcall journal_init+0x0/0x81 [jbd] returned 0 after 0 usecs [ 62.221393] calling init_ext3_fs+0x0/0x5e [ext3] @ 328 [ 62.228181] initcall init_ext3_fs+0x0/0x5e [ext3] returned 0 after 0 usecs [ 62.248150] EXT3-fs: INFO: recovery required on readonly filesystem. [ 62.256015] EXT3-fs: write access will be enabled during recovery. [ 62.284155] kjournald starting. Commit interval 5 seconds [ 62.284155] EXT3-fs: recovery complete. [ 62.336056] EXT3-fs: mounted filesystem with ordered data mode. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 64.520246] udev[379]: starting version 164 . Synthesizing the initial hotplug events...done. Waiting for /dev to be fully populated...[ 64.709164] calling serio_raw_init+0x0/0x14 [serio_raw] @ 410 [ 64.716091] initcall serio_raw_init+0x0/0x14 [serio_raw] returned 0 after 0 usecs [ 64.724317] calling pci_hotplug_init+0x0/0x3b [pci_hotplug] @ 391 [ 64.732030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 64.737350] calling i2c_init+0x0/0x56 [i2c_core] @ 407 [ 64.737823] initcall i2c_init+0x0/0x56 [i2c_core] returned 0 after 0 usecs [ 64.748032] initcall pci_hotplug_init+0x0/0x3b [pci_hotplug] returned 0 after 15624 usecs [ 64.761702] calling shpcd_init+0x0/0x4d [shpchp] @ 398 [ 64.764328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 64.766171] calling i2c_i801_init+0x0/0xa2 [i2c_i801] @ 407 [ 64.766283] querying PCI -> IRQ mapping bus:0, slot:31, pin:1. [ 64.766288] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT B; probably buggy MP table [ 64.766569] initcall i2c_i801_init+0x0/0xa2 [i2c_i801] returned 0 after 0 usecs [ 64.768105] initcall shpcd_init+0x0/0x4d [shpchp] returned 0 after 3906 usecs [ 64.769448] calling mod_init+0x0/0x1d8 [intel_rng] @ 405 [ 64.772092] calling pcspkr_init+0x0/0xa [pcspkr] @ 408 [ 64.780533] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 64.782318] calling edac_init+0x0/0xa1 [edac_core] @ 387 [ 64.782322] EDAC MC: Ver: 2.1.0 Nov 20 2010 [ 64.782300] Intel 82802 RNG detected [ 64.782463] initcall mod_init+0x0/0x1d8 [intel_rng] returned 0 after 11718 usecs [ 64.782534] initcall edac_init+0x0/0xa1 [edac_core] returned 0 after 0 usecs [ 64.812109] initcall pcspkr_init+0x0/0xa [pcspkr] returned 0 after 31249 usecs [ 64.876403] calling e7xxx_init+0x0/0x27 [e7xxx_edac] @ 387 [ 64.880878] EDAC e7xxx: tolm = f8000, remapbase = 200000, remaplimit = 208000 [ 64.880892] calling init_tis+0x0/0x80 [tpm_tis] @ 446 [ 64.880953] initcall init_tis+0x0/0x80 [tpm_tis] returned 0 after 0 usecs [ 64.884368] EDAC MC0: Giving out device to 'e7xxx_edac' 'E7501': DEV 0000:00:00.0 [ 64.888054] EDAC PCI0: Giving out device to module 'e7xxx_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 64.892060] initcall e7xxx_init+0x0/0x27 [e7xxx_edac] returned 0 after 11718 usecs [ 65.061603] calling snd_mem_init+0x0/0x22 [snd_page_alloc] @ 408 [ 65.064029] initcall snd_mem_init+0x0/0x22 [snd_page_alloc] returned 0 after 0 usecs [ 65.137860] calling init_soundcore+0x0/0x81 [soundcore] @ 408 [ 65.140066] initcall init_soundcore+0x0/0x81 [soundcore] returned 0 after 0 usecs [ 65.196014] calling alsa_sound_init+0x0/0x78 [snd] @ 408 [ 65.200059] initcall alsa_sound_init+0x0/0x78 [snd] returned 0 after 0 usecs [ 65.220019] calling alsa_timer_init+0x0/0x122 [snd_timer] @ 408 [ 65.228113] initcall alsa_timer_init+0x0/0x122 [snd_timer] returned 0 after 0 usecs [ 65.296012] calling alsa_pcm_init+0x0/0x4c [snd_pcm] @ 408 [ 65.300104] initcall alsa_pcm_init+0x0/0x4c [snd_pcm] returned 0 after 0 usecs [ 65.348944] calling pcsp_init+0x0/0x19 [snd_pcsp] @ 408 [ 65.352028] Error: Driver 'pcspkr' is already registered, aborting... [ 65.360023] initcall pcsp_init+0x0/0x19 [snd_pcsp] returned -16 after 7812 usecs [ 65.368017] initcall pcsp_init+0x0/0x19 [snd_pcsp] returned with error code -16 [ 65.409839] calling evdev_init+0x0/0xa [evdev] @ 531 [ 65.412099] initcall evdev_init+0x0/0xa [evdev] returned 0 after 0 usecs done. Generating udev events for MD arrays...done. Checking root file system...fsck from util-linux-ng 2.17.2 /dev/mapper/quelea0-root: clean, 34286/152608 files, 245915/610304 blocks (check in 2 mounts) done. [ 66.244063] EXT3 FS on dm-1, internal journal Starting early crypto disks...md1_crypt (starting)... md3_crypt (starting)... Unlocking the disk /dev/md3 (md3_crypt) Enter passphrase: done. Cleaning up ifupdown.... Setting up networking.... [ 70.817471] calling loop_init+0x0/0x163 [loop] @ 737 [ 70.825782] loop: module loaded [ 70.830890] initcall loop_init+0x0/0x163 [loop] returned 0 after 3906 usecs Loading kernel modules...done. Setting up LVM Volume Groups Reading all physical volumes. This may take a while... Found volume group "quelea1" using metadata type lvm2 Found volume group "quelea0" using metadata type lvm2 2 logical volume(s) in volume group "quelea1" now active 3 logical volume(s) in volume group "quelea0" now active . Starting remaining crypto disks...done. Activating lvm and md swap...[ 72.304513] Adding 979832k swap on /dev/mapper/md1_crypt. Priority:-1 extents:1 across:979832k done. Checking file systems...fsck from util-linux-ng 2.17.2 /dev/md0: clean, 242/122880 files, 81112/489856 blocks /dev/mapper/quelea0-usr: clean, 84735/305216 files, 465679/1220608 blocks /dev/mapper/quelea0-var: clean, 4254/305216 files, 319977/1220608 blocks done. Mounting local filesystems...[ 73.528054] kjournald starting. Commit interval 5 seconds [ 73.584056] EXT3 FS on md0, internal journal [ 73.588018] EXT3-fs: mounted filesystem with ordered data mode. [ 73.632155] kjournald starting. Commit interval 5 seconds [ 73.636042] EXT3 FS on dm-2, internal journal [ 73.636050] EXT3-fs: mounted filesystem with ordered data mode. [ 73.696151] kjournald starting. Commit interval 5 seconds [ 73.700047] EXT3 FS on dm-3, internal journal done. [ 73.700052] EXT3-fs: mounted filesystem with ordered data mode. Activating swapfile swap...done. Cleaning up temporary files.... Configuring network interfaces...[ 74.849271] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 74.856377] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 74.865315] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready done. Cleaning up temporary files.... Setting console screen modes and fonts. cannot (un)set powersave mode Setting kernel variables ...done. INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. [ 75.440925] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 75.444381] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 75.456215] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Starting enhanced syslogd: rsyslogd. Starting MD monitoring service: mdadm --monitor. Starting periodic command scheduler: cron. Starting system message bus: dbus. Starting OpenBSD Secure Shell server: sshd. Running scripts in rc2.d/ took 1 seconds. Debian GNU/Linux squeeze/sid quelea ttyS0 quelea login:

Attachment: pgpfemlYQprYS.pgp
Description: PGP signature

_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.