Re: [Xen-devel] swiotlb=force in Konrad's xen-pcifront-0.8.2 pvops domU kernel with PCI passthrough

[Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>]

>> That sounds like the tachyon device is updating the wrong memory location. 
>> How are you programming the memory location where thetachyon device is 
>> suppose to touch? Are you using the value from pci_map_page or are you using 
>> virt_to_phys? The virt_to_phys should be different from the pci_map_page.. 
>> unless you allocated a coherent DMA pool using pci_alloc_coherent in which 
>> case the virt_to_phys() values for that pool should be the right MFNs.
> 
> Our driver uses pci_map_single to get the physical addr to program the chip.

OK. Good.
> 
> 
> One way you can figure this is doing something like this to make sure you got 
> the right MFN:
> 
> add these two:
> #include <xen/page.h>
> #include <asm/xen/page.h>
> 
>           phys_addr_t phys = page_to_phys(mem->pages[i]);
> +               if (xen_pv_domain()) {
> +                       phys_addr_t xen_phys = PFN_PHYS(pfn_to_mfn(
> +                                       page_to_pfn(mem->pages[i])));
> +                       if (phys != xen_phys) {
> +                               printk(KERN_ERR "Fixing up: (0x%lx->0x%lx)." \
> +                                       " CODE UNTESTED!\n",
> +                                       (unsigned long)phys,
> +                                       (unsigned long)xen_phys);
> +                               WARN_ON_ONCE(phys != xen_phys);
> +                               phys = xen_phys;
> +                       }
> +               }
>       and using the 'phys' value from now.
> 
> 
> 
> If this sounds like black magic, here is a short writeup 
> http://wiki.xensource.com/xenwiki/XenPVOPSDRM
> 
> look at "Why those patches" section.
> 
> Lastly, are you using unsigned long for or the phys_addr_t typedefs?
> 
> The driver uses dma_addr_t for physical address. 

Excellent.
> 
> The more I think about your problem the more it sounds like a truncating 
> issue. You said that it works just right (albeit slow) if you use 
> 'swiotlb=force'. The slowness could be due to not using the pci_sync_* APIs 
> to sync the DMA buffers.. But irregardless using bounce buffers will slow the 
> DMA operations down.
> 
> The driver do use pci_dma_sync_single_for_cpu or 
> pci_dma_sync_single_for_device to sync the DMA buffers. Without these syncs, 
> the driver would not work at all.

<nods> That makes sense.
> 
> Using the bounce buffers limits the DMA operations to under 32-bit. So could 
> it be that you are using some casting macro that casts a PFN to unsigned long 
> or vice-versa and we end up truncating it to 32-bit? (I've seen this issue 
> actually with InfiniBand drivers back in RHEL5 days..). Lastly, do you set 
> your DMA mask on the device to 32BIT?
> 
> The tachyon chip supports both 32-bit & 45-bit dma. Some features need to set 
> 32-bit physical addr to chip. Others need to set 45-bit physical addr to 
> chip. 

Oh boy. That complicates it. 

> The driver doesn't set DMA mask on the device to 32 bit.

Is it set then to 45bit?

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel