__ __ _ _ ___ ____ _ \ \/ /___ _ __ | || | / _ \ |___ \ _ __ ___/ | _ __ _ __ ___ \ // _ \ '_ \ | || |_| | | | __) |__| '__/ __| |__| '_ \| '__/ _ \ / \ __/ | | | |__ _| |_| | / __/|__| | | (__| |__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)___(_)_____| |_| \___|_| | .__/|_| \___| |_| (XEN) Xen version 4.0.2-rc1-pre (root@localhost) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Wed Oct 6 16:51:46 CEST 2010 (XEN) Latest ChangeSet: Fri Sep 17 17:06:57 2010 +0100 21350:6e0ffcd2d9e0 (XEN) Console output is synchronous. (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: com2=auto console=com2,vga dom0_mem=2048M sync_console loglvl=all guest_loglvl=all noreboot (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 00000000000a0000 (usable) (XEN) 0000000000100000 - 00000000cffa8000 (usable) (XEN) 00000000cffa8000 - 00000000cffb7c00 (ACPI data) (XEN) 00000000cffb7c00 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000230000000 (usable) (XEN) ACPI: RSDP 000F2A00, 0024 (r2 DELL ) (XEN) ACPI: XSDT 000F2A80, 004C (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: FACP 000F2B88, 00F4 (r3 DELL PE_SC3 1 DELL 1) (XEN) ACPI: DSDT CFFA8000, 2A90 (r1 DELL PE_SC3 1 MSFT 100000E) (XEN) ACPI: FACS CFFB7C00, 0040 (XEN) ACPI: APIC 000F2C7C, 00C8 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SPCR 000F2D5D, 0050 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: HPET 000F2DAD, 0038 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: MCFG 000F2DE5, 003C (r1 DELL PE_SC3 1 DELL 1) (XEN) System RAM: 8191MB (8387872kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000230000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fe710 (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[cffb7c0c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) (XEN) Processor #6 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) (XEN) Processor #1 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) (XEN) Processor #7 6:15 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) (XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 1995.056 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC TPR shadow (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) Intel machine check reporting enabled (XEN) I/O virtualisation disabled (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET �(XEN) Allocated console ring of 32 KiB. (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x812000 (XEN) elf_parse_binary: phdr: paddr=0x1812000 memsz=0xe8550 (XEN) elf_parse_binary: phdr: paddr=0x18fb000 memsz=0x8c8 (XEN) elf_parse_binary: phdr: paddr=0x18fc000 memsz=0x1d6d98 (XEN) elf_parse_binary: phdr: paddr=0x1ad3000 memsz=0xdc8000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x289b000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81ad3200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff8289b000 (XEN) virt_entry = 0xffffffff81ad3200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x289b000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000210000000->0000000220000000 (458752 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff8289b000 (XEN) Init. ramdisk: ffffffff8289b000->ffffffff8ccc6e00 (XEN) Phys-Mach map: ffffffff8ccc7000->ffffffff8d0c7000 (XEN) Start info: ffffffff8d0c7000->ffffffff8d0c74b4 (XEN) Page tables: ffffffff8d0c8000->ffffffff8d135000 (XEN) Boot stack: ffffffff8d135000->ffffffff8d136000 (XEN) TOTAL: ffffffff80000000->ffffffff8d400000 (XEN) ENTRY ADDRESS: ffffffff81ad3200 (XEN) Dom0 has maximum 4 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81812000 (XEN) elf_load_binary: phdr 1 at 0xffffffff81812000 -> 0xffffffff818fa550 (XEN) elf_load_binary: phdr 2 at 0xffffffff818fb000 -> 0xffffffff818fb8c8 (XEN) elf_load_binary: phdr 3 at 0xffffffff818fc000 -> 0xffffffff81ad2d98 (XEN) elf_load_binary: phdr 4 at 0xffffffff81ad3000 -> 0xffffffff81c58000 (XEN) Scrubbing Free RAM: .............................................................done. (XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65 (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 172kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.23+xen5 (root@xhdev1) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #12 SMP Wed Oct 6 16:43:34 CEST 2010 [ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 console=tty0 earlyprintk=xen nomodeset [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] Xen: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] Xen: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000002fffa8000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x2fffa8 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002fffa8000 [ 0.000000] RAMDISK: 0289b000 - 0ccc6e00 [ 0.000000] ACPI: RSDP 00000000000f2a00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f2a80 0004C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000000f2b88 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cffa8000 02A90 (v01 DELL PE_SC3 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000cffb7c00 00040 [ 0.000000] ACPI: APIC 00000000000f2c7c 000C8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000000f2d5d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000000f2dad 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000000f2de5 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000002fffa8000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000002fffa8000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000001ffff] [ 0.000000] bootmap [0000000000020000 - 000000000007fff7] pages 60 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 02fffa8000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000d0c8000 - 000d135000] XEN PAGETABLES ==> [000d0c8000 - 000d135000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00027718b0] TEXT DATA BSS ==> [0001000000 - 00027718b0] [ 0.000000] #4 [000289b000 - 000ccc6e00] RAMDISK ==> [000289b000 - 000ccc6e00] [ 0.000000] #5 [000ccc7000 - 000d0c8000] XEN START INFO ==> [000ccc7000 - 000d0c8000] [ 0.000000] #6 [0100000000 - 02fffa8000] XEN EXTRA ==> [0100000000 - 02fffa8000] [ 0.000000] #7 [0002772000 - 000277d234] BRK ==> [0002772000 - 000277d234] [ 0.000000] #8 [0000100000 - 0000493000] PGTABLE ==> [0000100000 - 0000493000] [ 0.000000] #9 [000d135000 - 000e13d000] PGTABLE ==> [000d135000 - 000e13d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002fffa8 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 0: 0x00100000 -> 0x002fffa8 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec81000, GSI 64-64 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000 [ 0.000000] PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000 [ 0.000000] PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:4ffa8000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 478 pages/cpu @ffff880038887000 s1928600 r8192 d21096 u1957888 [ 0.000000] pcpu-alloc: s1928600 r8192 d21096 u1957888 alloc=478*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2540468 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 ro console=hvc0 console=tty0 earlyprintk=xen nomodeset [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 1538780k/12582560k available (5907k kernel code, 2097536k absent, 8946244k reserved, 3286k data, 3400k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.23+xen5 (root@xhdev1) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #12 SMP Wed Oct 6 16:43:34 CEST 2010 [ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 console=tty0 earlyprintk=xen nomodeset [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] Xen: 00000000cffa8000 - 00000000cffb7c00 (ACPI data) [ 0.000000] Xen: 00000000cffb7c00 - 00000000d0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000002fffa8000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x2fffa8 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000080000000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002fffa8000 [ 0.000000] RAMDISK: 0289b000 - 0ccc6e00 [ 0.000000] ACPI: RSDP 00000000000f2a00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000f2a80 0004C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: FACP 00000000000f2b88 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: DSDT 00000000cffa8000 02A90 (v01 DELL PE_SC3 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000cffb7c00 00040 [ 0.000000] ACPI: APIC 00000000000f2c7c 000C8 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: SPCR 00000000000f2d5d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: HPET 00000000000f2dad 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] ACPI: MCFG 00000000000f2de5 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000002fffa8000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000002fffa8000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000001ffff] [ 0.000000] bootmap [0000000000020000 - 000000000007fff7] pages 60 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 02fffa8000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000d0c8000 - 000d135000] XEN PAGETABLES ==> [000d0c8000 - 000d135000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00027718b0] TEXT DATA BSS ==> [0001000000 - 00027718b0] [ 0.000000] #4 [000289b000 - 000ccc6e00] RAMDISK ==> [000289b000 - 000ccc6e00] [ 0.000000] #5 [000ccc7000 - 000d0c8000] XEN START INFO ==> [000ccc7000 - 000d0c8000] [ 0.000000] #6 [0100000000 - 02fffa8000] XEN EXTRA ==> [0100000000 - 02fffa8000] [ 0.000000] #7 [0002772000 - 000277d234] BRK ==> [0002772000 - 000277d234] [ 0.000000] #8 [0000100000 - 0000493000] PGTABLE ==> [0000100000 - 0000493000] [ 0.000000] #9 [000d135000 - 000e13d000] PGTABLE ==> [000d135000 - 000e13d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002fffa8 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 0: 0x00100000 -> 0x002fffa8 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec81000, GSI 64-64 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffb7000 [ 0.000000] PM: Registered nosave memory: 00000000cffb7000 - 00000000cffb8000 [ 0.000000] PM: Registered nosave memory: 00000000cffb8000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:4ffa8000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 478 pages/cpu @ffff880038887000 s1928600 r8192 d21096 u1957888 [ 0.000000] pcpu-alloc: s1928600 r8192 d21096 u1957888 alloc=478*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2540468 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 ro console=hvc0 console=tty0 earlyprintk=xen nomodeset [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 1538780k/12582560k available (5907k kernel code, 2097536k absent, 8946244k reserved, 3286k data, 3400k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 104857600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 1995.056 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.11 BogoMIPS (lpj=1995056) [ 0.001405] Security Framework initialized [ 0.006416] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.017200] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.021575] Mount-cache hash table entries: 256 [ 0.023660] Initializing cgroup subsys ns [ 0.023996] Initializing cgroup subsys cpuacct [ 0.023996] Initializing cgroup subsys memory [ 0.024140] Initializing cgroup subsys devices [ 0.024996] Initializing cgroup subsys freezer [ 0.024996] Initializing cgroup subsys net_cls [ 0.025105] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.025996] CPU: L2 cache: 4096K [ 0.026009] CPU 0/0x0 -> Node 0 [ 0.027005] CPU: Physical Processor ID: 0 [ 0.027995] CPU: Processor Core ID: 0 [ 0.028008] mce: CPU supports 6 MCE banks [ 0.029036] Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. [ 0.029995] lockdep: fixing up alternatives. [ 0.029995] SMP alternatives: switching to UP code [ 0.030879] ACPI: Core revision 20090903 [ 0.043298] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.043993] ftrace: allocating 22873 entries in 90 pages [ 0.047122] installing Xen timer for CPU 1 [ 0.048130] lockdep: fixing up alternatives. [ 0.048992] SMP alternatives: switching to SMP code [ 0.000999] Initializing CPU#1 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU 1/0x0 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 3 [ 0.000999] CPU: Processor Core ID: 0 [ 0.049884] installing Xen timer for CPU 2 [ 0.000999] Initializing CPU#2 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU 2/0x0 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.050967] installing Xen timer for CPU 3 [ 0.000999] Initializing CPU#3 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU 3/0x0 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 3 [ 0.000999] CPU: Processor Core ID: 1 [ 0.051420] Brought up 4 CPUs [ 0.056610] Grant table initialized [ 0.056991] regulator: core version 0.5 [ 0.056991] Time: 14:58:39 Date: 10/06/10 [ 0.057439] NET: Registered protocol family 16 [ 0.060535] ACPI: bus type pci registered [ 0.061990] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.061990] PCI: MCFG area at e0000000 reserved in E820 [ 0.129158] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.129980] PCI: Using configuration type 1 for base access [ 0.129980] PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort. [ 0.141408] bio: create slab at 0 [ 0.145234] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.156200] ACPI: Interpreter enabled [ 0.156976] ACPI: (supports S0 S4 S5) [ 0.157975] ACPI: Using IOAPIC for interrupt routing [ 0.184468] ACPI: No dock devices found. [ 0.185760] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.186579] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.186971] pci 0000:00:00.0: PME# disabled [ 0.186971] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.186971] pci 0000:00:02.0: PME# disabled [ 0.186971] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.186971] pci 0000:00:03.0: PME# disabled [ 0.187339] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.187971] pci 0000:00:04.0: PME# disabled [ 0.187971] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.187971] pci 0000:00:05.0: PME# disabled [ 0.187971] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.187971] pci 0000:00:06.0: PME# disabled [ 0.187971] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.187971] pci 0000:00:07.0: PME# disabled [ 0.188971] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.188971] pci 0000:00:1c.0: PME# disabled [ 0.189697] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.189971] pci 0000:00:1d.7: PME# disabled [ 0.189971] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.189971] pci 0000:06:00.0: PME# disabled [ 0.189971] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold [ 0.189971] pci 0000:06:00.3: PME# disabled [ 0.189971] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.190970] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.190970] pci 0000:07:00.0: PME# disabled [ 0.190970] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.190970] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 0.190970] pci 0000:07:01.0: PME# disabled [ 0.190970] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.190970] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.190970] pci 0000:08:00.0: PME# disabled [ 0.190970] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.191235] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.191970] pci 0000:09:00.0: PME# disabled [ 0.191970] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.191970] pci 0000:01:00.0: PME# disabled [ 0.191970] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.191970] pci 0000:01:00.2: PME# disabled [ 0.191970] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.193274] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.193970] pci 0000:04:00.0: PME# disabled [ 0.193970] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.193970] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.193970] pci 0000:05:00.0: PME# disabled [ 0.193970] pci 0000:00:1e.0: transparent bridge (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:02.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:04.0 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:06.0 (XEN) PCI add device 00:07.0 (XEN) PCI add device 00:10.0 (XEN) PCI add device 00:10.1 (XEN) PCI add device 00:10.2 (XEN) PCI add device 00:11.0 (XEN) PCI add device 00:13.0 (XEN) PCI add device 00:15.0 (XEN) PCI add device 00:16.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.1 (XEN) PCI add device 06:00.0 (XEN) PCI add device 06:00.3 (XEN) PCI add device 07:00.0 (XEN) PCI add device 07:01.0 (XEN) PCI add device 08:00.0 (XEN) PCI add device 09:00.0 (XEN) PCI add device 01:00.0 (XEN) PCI add device 01:00.2 (XEN) PCI add device 02:0e.0 (XEN) PCI add device 04:00.0 (XEN) PCI add device 05:00.0 (XEN) PCI add device 10:0d.0 [ 0.265959] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12) [ 0.266499] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.266959] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12) [ 0.266959] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12) [ 0.266959] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) [ 0.266959] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) [ 0.267558] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.268489] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. [ 0.268958] xen_balloon: Initialising balloon driver with page order 0. [ 0.269085] last_pfn = 0x2fffa8 max_arch_pfn = 0x400000000 [ 0.355817] vgaarb: device added: PCI:0000:10:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.355951] vgaarb: loaded [ 0.356946] SCSI subsystem initialized [ 0.358343] usbcore: registered new interface driver usbfs [ 0.359108] usbcore: registered new interface driver hub [ 0.360067] usbcore: registered new device driver usb [ 0.361441] PCI: Using ACPI for IRQ routing [ 0.362737] NetLabel: Initializing [ 0.362951] NetLabel: domain hash size = 128 [ 0.362951] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.362951] NetLabel: unlabeled traffic allowed by default [ 0.363951] Switching to clocksource xen [ 0.364286] kstop/0 used greatest stack depth: 6456 bytes left [ 0.376102] kstop/1 used greatest stack depth: 6440 bytes left [ 0.487177] pnp: PnP ACPI init [ 0.493351] ACPI: bus type pnp registered [ 0.503563] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.516417] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.531281] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.544698] xen_allocate_pirq: returning irq 3 for gsi 3 [ 0.555269] Already setup the GSI :3 [ 0.574385] pnp: PnP ACPI: found 12 devices [ 0.574385] ACPI: ACPI bus type pnp unregistered [ 0.593631] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.594575] system 00:08: ioport range 0x880-0x8bf has been reserved [ 0.594575] system 00:08: ioport range 0x8c0-0x8df has been reserved [ 0.594575] system 00:08: ioport range 0x8e0-0x8e3 has been reserved [ 0.594575] system 00:08: ioport range 0xc00-0xc7f has been reserved [ 0.657679] system 00:08: ioport range 0xca0-0xca7 has been reserved [ 0.658649] system 00:08: ioport range 0xca9-0xcab has been reserved [ 0.658649] system 00:08: ioport range 0xcad-0xcaf has been reserved [ 0.658649] system 00:09: ioport range 0xca8-0xca8 has been reserved [ 0.658649] system 00:09: ioport range 0xcac-0xcac has been reserved [ 0.658649] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.744254] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.744384] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 [ 0.744384] pci 0000:08:00.0: IO window: disabled [ 0.744384] pci 0000:08:00.0: MEM window: 0xf4000000-0xf7ffffff [ 0.744384] pci 0000:08:00.0: PREFETCH window: disabled [ 0.744384] pci 0000:07:00.0: PCI bridge, secondary bus 0000:08 [ 0.744384] pci 0000:07:00.0: IO window: disabled [ 0.744384] pci 0000:07:00.0: MEM window: 0xf4000000-0xf7ffffff [ 0.744384] pci 0000:07:00.0: PREFETCH window: disabled [ 0.744384] pci 0000:07:01.0: PCI bridge, secondary bus 0000:0a [ 0.744384] pci 0000:07:01.0: IO window: disabled [ 0.744384] pci 0000:07:01.0: MEM window: disabled [ 0.744384] pci 0000:07:01.0: PREFETCH window: disabled [ 0.744384] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 0.744384] pci 0000:06:00.0: IO window: disabled [ 0.744384] pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff [ 0.744384] pci 0000:06:00.0: PREFETCH window: disabled [ 0.744384] pci 0000:06:00.3: PCI bridge, secondary bus 0000:0b [ 0.744384] pci 0000:06:00.3: IO window: disabled [ 0.744384] pci 0000:06:00.3: MEM window: disabled [ 0.744384] pci 0000:06:00.3: PREFETCH window: disabled [ 0.744384] pci 0000:00:02.0: PCI bridge, secondary bus 0000:06 [ 0.744384] pci 0000:00:02.0: IO window: disabled [ 0.744384] pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff [ 0.744384] pci 0000:00:02.0: PREFETCH window: disabled [ 0.744384] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02 [ 0.744384] pci 0000:01:00.0: IO window: disabled [ 0.744384] pci 0000:01:00.0: MEM window: 0xfc400000-0xfc5fffff [ 0.744384] pci 0000:01:00.0: PREFETCH window: 0x000000d8000000-0x000000d80fffff [ 0.744384] pci 0000:01:00.2: PCI bridge, secondary bus 0000:03 [ 0.744384] pci 0000:01:00.2: IO window: disabled [ 0.744384] pci 0000:01:00.2: MEM window: disabled [ 0.744384] pci 0000:01:00.2: PREFETCH window: disabled [ 0.744384] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.744384] pci 0000:00:03.0: IO window: disabled [ 0.744384] pci 0000:00:03.0: MEM window: 0xfc300000-0xfc5fffff [ 0.744384] pci 0000:00:03.0: PREFETCH window: 0x000000d8000000-0x000000d80fffff [ 0.744384] pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c [ 0.744384] pci 0000:00:04.0: IO window: disabled [ 0.744384] pci 0000:00:04.0: MEM window: disabled [ 0.744384] pci 0000:00:04.0: PREFETCH window: disabled [ 0.744384] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0d [ 0.744384] pci 0000:00:05.0: IO window: disabled [ 0.744384] pci 0000:00:05.0: MEM window: disabled [ 0.744384] pci 0000:00:05.0: PREFETCH window: disabled [ 0.744384] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e [ 0.744384] pci 0000:00:06.0: IO window: disabled [ 0.744384] pci 0000:00:06.0: MEM window: disabled [ 0.744384] pci 0000:00:06.0: PREFETCH window: disabled [ 0.744384] pci 0000:00:07.0: PCI bridge, secondary bus 0000:0f [ 0.744384] pci 0000:00:07.0: IO window: disabled [ 0.744384] pci 0000:00:07.0: MEM window: disabled [ 0.744384] pci 0000:00:07.0: PREFETCH window: disabled [ 0.744384] pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 [ 0.744384] pci 0000:04:00.0: IO window: disabled [ 0.744384] pci 0000:04:00.0: MEM window: 0xf8000000-0xfbffffff [ 0.744384] pci 0000:04:00.0: PREFETCH window: disabled [ 0.744384] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.744384] pci 0000:00:1c.0: IO window: disabled [ 0.744384] pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff [ 0.744384] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.744384] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10 [ 0.744384] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.744384] pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff [ 0.744384] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 1.480694] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.481654] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.505180] Already setup the GSI :16 [ 1.506162] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.506162] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.537326] Already setup the GSI :16 [ 1.538309] pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.538309] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.569797] Already setup the GSI :16 [ 1.570781] pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.570781] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.602114] Already setup the GSI :16 [ 1.603098] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.603098] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.634180] Already setup the GSI :16 [ 1.635164] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.635164] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.666245] Already setup the GSI :16 [ 1.667229] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.667229] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.698311] Already setup the GSI :16 [ 1.699294] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.719782] NET: Registered protocol family 2 [ 1.730802] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.752501] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.773190] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) [ 1.773387] TCP: Hash tables configured (established 524288 bind 65536) [ 1.773387] TCP reno registered [ 1.812354] NET: Registered protocol family 1 [ 1.821600] pci 0000:00:1f.0: rerouting interrupts for [8086:2670] [ 1.822388] pci 0000:01:00.0: rerouting interrupts for [8086:0370] [ 1.822388] pci 0000:01:00.2: rerouting interrupts for [8086:0372] [ 1.859762] Trying to unpack rootfs image as initramfs... [ 2.369066] Freeing initrd memory: 168111k freed [ 2.621631] DMA-API: preallocated 32768 debug entries [ 2.622403] DMA-API: debugging enabled by kernel config [ 2.622403] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.622403] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 2.622403] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 2.700891] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.744209] VFS: Disk quotas dquot_6.5.2 [ 2.752581] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.769165] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 2.794422] SGI XFS Quota Management subsystem [ 2.794886] msgmni has been set to 3333 [ 2.813291] cryptomgr_test used greatest stack depth: 5800 bytes left [ 2.826092] cryptomgr_test used greatest stack depth: 5776 bytes left [ 2.826306] alg: No test for stdrng (krng) [ 2.826787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.826808] io scheduler noop registered [ 2.826812] io scheduler anticipatory registered [ 2.826816] io scheduler deadline registered [ 2.827465] io scheduler cfq registered (default) [ 2.847311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.847311] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.847311] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.852145] pci-stub: invalid id string "" [ 2.945188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.946009] ACPI: Power Button [PWRF] [ 2.988715] Event-channel device installed. [ 3.016850] registering netback [ 3.037834] hpet_acpi_add: no address or irqs in _CRS [ 3.038269] Non-volatile memory driver v1.3 [ 3.038269] Linux agpgart interface v0.103 [ 3.065619] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled (XEN) irq.c:1144:d0 Cannot bind IRQ 3 to guest. In use by 'ns16550'. (XEN) irq.c:1144:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:1144:d0 Cannot bind IRQ 3 to guest. In use by 'ns16550'. (XEN) irq.c:1144:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:1144:d0 Cannot bind IRQ 3 to guest. In use by 'ns16550'. (XEN) irq.c:1144:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. (XEN) irq.c:1144:d0 Cannot bind IRQ 3 to guest. In use by 'ns16550'. (XEN) irq.c:1144:d0 Cannot bind IRQ 2 to guest. In use by 'cascade'. [ 3.419367] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.432820] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.456255] brd: module loaded [ 3.467670] loop: module loaded [ 3.474190] input: Macintosh mouse button emulation as /devices/virtual/input/input1 [ 3.492367] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 3.492367] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 3.521353] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 3.522259] megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 [ 3.546234] megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78 [ 3.561571] megasas: FW now in Ready state [ 3.614494] scsi0 : LSI SAS based MegaRAID driver [ 3.626669] scsi 0:0:0:0: Direct-Access MAXTOR ATLAS10K5_147SAS BP00 PQ: 0 ANSI: 5 [ 3.644743] scsi 0:0:1:0: Direct-Access SEAGATE ST3146855SS S513 PQ: 0 ANSI: 5 [ 3.711287] scsi 0:0:8:0: Enclosure DP BACKPLANE 1.00 PQ: 0 ANSI: 5 [ 3.849161] scsi 0:2:0:0: Direct-Access DELL PERC 5/i 1.00 PQ: 0 ANSI: 5 [ 3.967339] sd 0:2:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB) [ 3.968052] scsi 0:0:8:0: Attached scsi generic sg0 type 13 [ 3.968443] sd 0:2:0:0: Attached scsi generic sg1 type 0 [ 3.969018] xen_allocate_pirq: returning irq 16 for gsi 16 [ 3.969075] Already setup the GSI :16 [ 3.969078] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.973132] scsi1 : ata_piix [ 3.973696] scsi2 : ata_piix [ 3.974065] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 3.974068] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 3.974561] Fixed MDIO Bus: probed [ 3.975279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.975491] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.975593] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.976583] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.977156] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.977156] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600000 [ 3.996103] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.996498] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.996501] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.996504] usb usb1: Product: EHCI Host Controller [ 3.996506] usb usb1: Manufacturer: Linux 2.6.32.23+xen5 ehci_hcd [ 3.996508] usb usb1: SerialNumber: 0000:00:1d.7 [ 3.997014] usb usb1: configuration #1 chosen from 1 choice [ 3.997515] hub 1-0:1.0: USB hub found [ 3.999183] hub 1-0:1.0: 6 ports detected [ 4.000056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.000147] uhci_hcd: USB Universal Host Controller Interface driver [ 4.000684] xen_allocate_pirq: returning irq 21 for gsi 21 [ 4.000690] Already setup the GSI :21 [ 4.000693] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.000732] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.001086] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.001212] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0 [ 4.004655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.004658] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.004661] usb usb2: Product: UHCI Host Controller [ 4.004663] usb usb2: Manufacturer: Linux 2.6.32.23+xen5 uhci_hcd [ 4.004666] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.005051] usb usb2: configuration #1 chosen from 1 choice [ 4.005326] hub 2-0:1.0: USB hub found [ 4.007193] hub 2-0:1.0: 2 ports detected [ 4.007718] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 4.007758] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.008057] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.008246] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0 [ 4.015707] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.015710] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.015713] usb usb3: Product: UHCI Host Controller [ 4.015715] usb usb3: Manufacturer: Linux 2.6.32.23+xen5 uhci_hcd [ 4.015718] usb usb3: SerialNumber: 0000:00:1d.1 [ 4.016092] usb usb3: configuration #1 chosen from 1 choice [ 4.016378] hub 3-0:1.0: USB hub found [ 4.018245] hub 3-0:1.0: 2 ports detected [ 4.018708] xen_allocate_pirq: returning irq 21 for gsi 21 [ 4.018714] Already setup the GSI :21 [ 4.018717] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 4.018755] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.019129] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.019215] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0 [ 4.023222] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.023225] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.023228] usb usb4: Product: UHCI Host Controller [ 4.023230] usb usb4: Manufacturer: Linux 2.6.32.23+xen5 uhci_hcd [ 4.023232] usb usb4: SerialNumber: 0000:00:1d.2 [ 4.023645] usb usb4: configuration #1 chosen from 1 choice [ 4.023884] hub 4-0:1.0: USB hub found [ 4.025697] hub 4-0:1.0: 2 ports detected [ 4.026900] PNP: No PS/2 controller found. Probing ports directly. [ 4.029784] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.029784] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.030870] mice: PS/2 mouse device common for all mice [ 4.031958] rtc_cmos 00:04: RTC can wake from S4 [ 4.032330] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.032404] rtc0: alarms up to one day, y3k, 242 bytes nvram [ 4.034015] device-mapper: uevent: version 1.0.3 [ 4.034782] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 4.036347] cpuidle: using governor ladder [ 4.036353] cpuidle: using governor menu [ 4.039583] usbcore: registered new interface driver hiddev [ 4.039720] usbcore: registered new interface driver usbhid [ 4.039730] usbhid: v2.6:USB HID core driver [ 4.040099] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.041065] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 4.041068] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 4.041071] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 4.041129] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.045847] TCP cubic registered [ 4.045850] Initializing XFRM netlink socket [ 4.045908] NET: Registered protocol family 17 [ 4.046831] registered taskstats version 1 [ 4.047622] No TPM chip found, activating TPM-bypass! [ 4.054399] Magic number: 14:401:990 [ 4.128965] ata1.00: ATAPI: TEAC CD-ROM CD-224E-N, 3.AB, max UDMA/33 [ 4.135805] ata1.00: configured for UDMA/33 [ 5.023420] rtc_cmos 00:04: setting system clock to 2010-10-06 14:58:44 UTC (1286377124) [ 5.040541] sd 0:2:0:0: [sda] Test WP failed, assume Write Enabled [ 5.041183] Initalizing network drop monitor service [ 5.063114] sd 0:2:0:0: [sda] Asking for cache data failed [ 5.064039] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 5.087978] sd 0:2:0:0: [sda] Test WP failed, assume Write Enabled [ 5.100452] sd 0:2:0:0: [sda] Asking for cache data failed [ 5.101364] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 5.123749] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 5.154246] sd 0:2:0:0: [sda] Test WP failed, assume Write Enabled [ 5.166818] sd 0:2:0:0: [sda] Asking for cache data failed [ 5.167731] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 5.167731] sd 0:2:0:0: [sda] Attached SCSI disk [ 5.202871] scsi 1:0:0:0: CD-ROM TEAC CD-ROM CD-224E-N 3.AB PQ: 0 ANSI: 5 [ 5.227400] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 5.228277] Uniform CD-ROM driver Revision: 3.20 [ 5.250129] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 5.264601] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 5.278580] Freeing unused kernel memory: 3400k freed [ 5.279012] Write protecting the kernel read-only data: 8228k [ 5.327828] busybox used greatest stack depth: 5312 bytes left [ 5.373768] exe used greatest stack depth: 5072 bytes left [ 5.385770] usb 1-1: New USB device found, idVendor=413c, idProduct=a001 [ 5.386667] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.414058] usb 1-1: configuration #1 chosen from 1 choice [ 5.425544] hub 1-1:1.0: USB hub found [ 5.433312] hub 1-1:1.0: 2 ports detected [ 5.545097] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 5.566298] all_generic_ide used greatest stack depth: 5008 bytes left [ 5.674790] usb 1-5: New USB device found, idVendor=04b4, idProduct=6560 [ 5.675682] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.703083] usb 1-5: configuration #1 chosen from 1 choice [ 5.714592] hub 1-5:1.0: USB hub found [ 5.722253] hub 1-5:1.0: 4 ports detected [ 5.795287] usb 1-1.1: new full speed USB device using ehci_hcd and address 4 [ 5.889166] usb 1-1.1: New USB device found, idVendor=413c, idProduct=0000 [ 5.890121] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.890121] usb 1-1.1: Product: DRAC5 [ 5.890121] usb 1-1.1: Manufacturer: Dell [ 5.890121] usb 1-1.1: SerialNumber: 0000000 [ 5.942954] usb 1-1.1: configuration #1 chosen from 1 choice [ 5.959897] input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.0/input/input2 [ 5.979959] generic-usb 0003:413C:0000.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1/input0 [ 6.006683] input: Dell DRAC5 as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1:1.1/input/input3 [ 6.026105] generic-usb 0003:413C:0000.0002: input,hidraw1: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1/input1 [ 6.111287] usb 1-1.2: new high speed USB device using ehci_hcd and address 5 [ 6.200254] async/0 used greatest stack depth: 4504 bytes left [ 6.212788] usb 1-1.2: New USB device found, idVendor=413c, idProduct=0001 [ 6.213746] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.213746] usb 1-1.2: Product: DRAC5 VIRTUAL MEDIA [ 6.213746] usb 1-1.2: Manufacturer: DELL INC. [ 6.213746] usb 1-1.2: SerialNumber: 1028 123456 [ 6.274025] usb 1-1.2: configuration #1 chosen from 1 choice [ 6.275238] async/1 used greatest stack depth: 4040 bytes left [ 6.665263] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) [ 6.684109] xen_allocate_pirq: returning irq 16 for gsi 16 [ 6.695075] Already setup the GSI :16 [ 6.696035] bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.846574] ses 0:0:8:0: Attached Enclosure device [ 7.020579] cdrom_id used greatest stack depth: 4032 bytes left [ 7.076410] bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw [ 7.719962] Initializing USB Mass Storage driver... [ 7.730656] scsi3 : SCSI emulation for USB Mass Storage devices [ 7.743700] scsi4 : SCSI emulation for USB Mass Storage devices [ 7.756479] usbcore: registered new interface driver usb-storage [ 7.757285] USB Mass Storage support registered. [ 7.785734] bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw [ 7.829770] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:15:c5:e75 [ 7.830260] xen_allocate_pirq: returning irq 16 for gsi 16 [ 7.866498] Already setup the GSI :16 [ 7.870403] bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.220085] bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j3.fw [ 8.258051] bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-5.0.0.j3.fw [ 8.299357] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:15:c5:e77 [ 8.342254] udev: renamed network interface eth1 to eth0 [ 8.391966] udev: renamed network interface eth0_rename to eth1 [ 9.606310] floppy0: no floppy controllers found [ 12.643238] floppy0: no floppy controllers found [ 12.745277] scsi 3:0:0:0: CD-ROM Dell Virtual CDROM 123 PQ: 0 ANSI: 0 CCS [ 12.895967] PM: Starting manual resume from disk [ 12.932091] REISERFS (device sda1): found reiserfs format "3.6" with standard journal [ 12.947879] REISERFS (device sda1): using ordered data mode [ 12.959583] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, m0 [ 12.990687] scsi 4:0:0:0: Direct-Access Dell Virtual Floppy 123 PQ: 0 ANSI: 0 CCS [ 13.001231] REISERFS (device sda1): checking transaction log (sda1) [ 13.022756] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 13.034925] sr1: scsi-1 drive [ 13.041778] REISERFS (device sda1): Using r5 hash to sort names [ 13.041993] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 13.042453] sr 3:0:0:0: Attached scsi generic sg4 type 5 [ 13.787840] modprobe used greatest stack depth: 3448 bytes left [ 14.947355] udevd version 125 started [ 15.642314] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.704011] modprobe used greatest stack depth: 2928 bytes left [ 16.356514] EDAC MC: Ver: 2.1.0 Oct 6 2010 [ 16.429741] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 16.461258] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 16.691786] intel_rng: FWH not detected [ 16.861437] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 17.213548] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 17.290840] Error: Driver 'pcspkr' is already registered, aborting... [ 19.101354] floppy0: no floppy controllers found [ 22.182343] floppy0: no floppy controllers found [ 23.414996] Adding 514072k swap on /dev/sda2. Priority:-1 extents:1 across:514072k [ 30.971057] 8139too Fast Ethernet driver 0.9.28 [ 31.175712] NET: Registered protocol family 10 [ 31.195538] lo: Disabled Privacy Extensions [ 31.258100] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) [ 31.258100] bonding: MII link monitoring set to 100 ms [ 31.525263] 802.1Q VLAN Support v1.8 Ben Greear [ 31.525263] All bugs added by David S. Miller [ 33.291002] XFS mounting filesystem dm-1 [ 33.371478] XFS mounting filesystem sda5 [ 34.977330] XFS mounting filesystem dm-0 [ 36.016019] ADDRCONF(NETDEV_UP): bond0: link is not ready [ 36.193435] bnx2: eth1: using MSI [ 36.203302] bonding: bond0: enslaving eth1 as a backup interface with a down link. [ 37.802070] bnx2: eth0: using MSI [ 37.811926] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.082475] bnx2: eth1 NIC Copper Link is Up, 100 Mbps full duplex [ 38.121088] bonding: bond0: link status up for interface eth1, enabling it in 0 ms. [ 38.122018] bonding: bond0: link status definitely up for interface eth1. [ 38.122018] bonding: bond0: making interface eth1 the new active one. [ 38.164056] bonding: bond0: first active interface up! [ 38.177360] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 38.998265] RPC: Registered udp transport module. [ 38.998265] RPC: Registered tcp transport module. [ 38.998265] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 39.128102] Slow work thread pool: Starting up [ 39.137467] Slow work thread pool: Ready [ 39.145723] FS-Cache: Loaded [ 39.379712] FS-Cache: Netfs 'nfs' registered for caching [ 39.468745] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex [ 39.484270] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 39.502339] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 40.994861] rc used greatest stack depth: 2768 bytes left [ 74.288221] Bridge firewalling registered [ 74.713782] svc: failed to register lockdv1 RPC service (errno 97). [ 74.736729] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 74.758948] NFSD: starting 90-second grace period [ 77.490880] ntpd used greatest stack depth: 2528 bytes left [ 77.519260] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 287.156887] device bond0.107 entered promiscuous mode [ 287.157386] device bond0 entered promiscuous mode [ 287.157386] device eth1 entered promiscuous mode [ 287.186344] xenbr0: port 1(bond0.107) entering forwarding state [ 287.392873] device bond0.154 entered promiscuous mode [ 287.403251] xenbr1: port 1(bond0.154) entering forwarding state [ 287.569700] device eth0 entered promiscuous mode [ 287.579146] backupbr0: port 1(eth0) entering forwarding state [ 288.043847] XENBUS: Unable to read cpu state [ 288.053692] XENBUS: Unable to read cpu state [ 288.063407] XENBUS: Unable to read cpu state [ 288.074127] XENBUS: Unable to read cpu state [ 355.053266] cc1 used greatest stack depth: 2416 bytes left [ 847.402332] [ 847.402334] ================================= [ 847.402395] [ INFO: inconsistent lock state ] [ 847.402395] 2.6.32.23+xen5 #12 [ 847.402395] --------------------------------- [ 847.402395] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [ 847.402395] cc1/4858 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 847.402395] (&(&ip->i_iolock)->mr_lock){++++?+}, at: [] xfs_ilock+0xa5/0xb0 [ 847.402395] {RECLAIM_FS-ON-W} state was registered at: [ 847.402395] [] mark_held_locks+0x74/0xa0 [ 847.402395] [] lockdep_trace_alloc+0xe5/0xf0 [ 847.402395] [] kmem_cache_alloc+0x3a/0x190 [ 847.402395] [] kmem_zone_alloc+0x9a/0xe0 [ 847.402395] [] kmem_zone_zalloc+0x1e/0x50 [ 847.402395] [] _xfs_trans_alloc+0x38/0x80 [ 847.402395] [] xfs_trans_alloc+0x9f/0xb0 [ 847.402395] [] xfs_setattr+0x5d9/0x950 [ 847.402395] [] xfs_vn_setattr+0x1b/0x20 [ 847.402395] [] notify_change+0x1a5/0x290 [ 847.402395] [] do_truncate+0x66/0xa0 [ 847.402395] [] may_open+0x2bb/0x2f0 [ 847.402395] [] do_filp_open+0x694/0xb20 [ 847.402395] [] do_sys_open+0x85/0xd0 [ 847.402395] [] sys_open+0x20/0x30 [ 847.402395] [] system_call_fastpath+0x16/0x1b [ 847.402395] irq event stamp: 240975 [ 847.402395] hardirqs last enabled at (240975): [] _spin_unlock_irqrestore+0x44/0x80 [ 847.402395] hardirqs last disabled at (240974): [] _spin_lock_irqsave+0x32/0xa0 [ 847.402395] softirqs last enabled at (240662): [] __do_softirq+0x1a3/0x1f0 [ 847.402395] softirqs last disabled at (240649): [] call_softirq+0x1c/0x30 [ 847.402395] [ 847.402395] other info that might help us debug this: [ 847.402395] 3 locks held by cc1/4858: [ 847.402395] #0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [] pipe_write+0x7d/0x660 [ 847.402395] #1: (shrinker_rwsem){++++..}, at: [] shrink_slab+0x37/0x1a0 [ 847.402395] #2: (&xfs_mount_list_lock){++++.-}, at: [] xfs_reclaim_inode_shrink+0xda/0x150 [ 847.402395] [ 847.402395] stack backtrace: [ 847.402395] Pid: 4858, comm: cc1 Not tainted 2.6.32.23+xen5 #12 [ 847.402395] Call Trace: [ 847.402395] [] print_usage_bug+0x17c/0x190 [ 847.402395] [] mark_lock+0x35a/0x440 [ 847.402395] [] ? check_usage_forwards+0x0/0x110 [ 847.402395] [] __lock_acquire+0x4d8/0x17c0 [ 847.402395] [] ? xen_force_evtchn_callback+0xd/0x10 [ 847.402395] [] ? check_events+0x12/0x20 [ 847.402395] [] ? xfs_dialloc+0x815/0x9c0 [ 847.402395] [] lock_acquire+0xe4/0x110 [ 847.402395] [] ? xfs_ilock+0xa5/0xb0 [ 847.402395] [] down_write_nested+0x64/0xb0 [ 847.402395] [] ? xfs_ilock+0xa5/0xb0 [ 847.402395] [] xfs_ilock+0xa5/0xb0 [ 847.402395] [] xfs_ireclaim+0xb5/0xf0 [ 847.402395] [] xfs_reclaim_inode+0xc5/0x130 [ 847.402395] [] xfs_inode_ag_walk+0x8c/0x150 [ 847.402395] [] ? xfs_reclaim_inode+0x0/0x130 [ 847.402395] [] xfs_inode_ag_iterator+0x9d/0xe0 [ 847.402395] [] ? xfs_reclaim_inode+0x0/0x130 [ 847.402395] [] xfs_reclaim_inode_shrink+0x106/0x150 [ 847.402395] [] shrink_slab+0x14a/0x1a0 [ 847.402395] [] do_try_to_free_pages+0x3ff/0x430 [ 847.402395] [] try_to_free_pages+0x76/0x80 [ 847.402395] [] ? isolate_pages_global+0x0/0x2b0 [ 847.402395] [] ? __might_sleep+0x47/0x130 [ 847.402395] [] __alloc_pages_nodemask+0x51f/0x7e0 [ 847.402395] [] alloc_pages_current+0x8c/0xe0 [ 847.402395] [] pipe_write+0x519/0x660 [ 847.402395] [] ? xen_force_evtchn_callback+0xd/0x10 [ 847.402395] [] ? pvclock_clocksource_read+0x4e/0xc0 [ 847.402395] [] do_sync_write+0xf9/0x140 [ 847.402395] [] ? autoremove_wake_function+0x0/0x40 [ 847.402395] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 847.402395] [] ? lock_release+0xb0/0x230 [ 847.402395] [] ? security_file_permission+0x16/0x20 [ 847.402395] [] vfs_write+0xba/0x120 [ 847.402395] [] sys_write+0x55/0x90 [ 847.402395] [] system_call_fastpath+0x16/0x1b