[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH V3 1/6] firmware, Change ACPI IO addresses and values to match QEMU BIOS.
From: Anthony PERARD <anthony.perard@xxxxxxxxxx> As part of the QEMU/Xen merge, this patch comes to change the IO Port adresses, the value of sleep states and add some information in the PCI registers to match the implementation of the BIOS of QEMU. This patch must be applied at the same time with an other patch for the piix4acpi of qemu-xen. Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx> --- tools/firmware/hvmloader/acpi/dsdt.asl | 12 ++++++------ tools/firmware/hvmloader/hvmloader.c | 4 ++++ xen/include/public/hvm/ioreq.h | 16 +++++++++++++--- 3 files changed, 23 insertions(+), 9 deletions(-) diff --git a/tools/firmware/hvmloader/acpi/dsdt.asl b/tools/firmware/hvmloader/acpi/dsdt.asl index 03799d3..ea8e324 100644 --- a/tools/firmware/hvmloader/acpi/dsdt.asl +++ b/tools/firmware/hvmloader/acpi/dsdt.asl @@ -33,22 +33,22 @@ DefinitionBlock ("DSDT.aml", "DSDT", 2, "Xen", "HVM", 0) */ Name (\_S3, Package (0x04) { - 0x05, /* PM1a_CNT.SLP_TYP */ - 0x05, /* PM1b_CNT.SLP_TYP */ + 0x01, /* PM1a_CNT.SLP_TYP */ + 0x01, /* PM1b_CNT.SLP_TYP */ 0x0, /* reserved */ 0x0 /* reserved */ }) Name (\_S4, Package (0x04) { - 0x06, /* PM1a_CNT.SLP_TYP */ - 0x06, /* PM1b_CNT.SLP_TYP */ + 0x00, /* PM1a_CNT.SLP_TYP */ + 0x00, /* PM1b_CNT.SLP_TYP */ 0x00, /* reserved */ 0x00 /* reserved */ }) Name (\_S5, Package (0x04) { - 0x07, /* PM1a_CNT.SLP_TYP */ - 0x07, /* PM1b_CNT.SLP_TYP */ + 0x00, /* PM1a_CNT.SLP_TYP */ + 0x00, /* PM1b_CNT.SLP_TYP */ 0x00, /* reserved */ 0x00 /* reserved */ }) diff --git a/tools/firmware/hvmloader/hvmloader.c b/tools/firmware/hvmloader/hvmloader.c index c4c5ddc..cfe026f 100644 --- a/tools/firmware/hvmloader/hvmloader.c +++ b/tools/firmware/hvmloader/hvmloader.c @@ -31,6 +31,7 @@ #include "option_rom.h" #include <xen/version.h> #include <xen/hvm/params.h> +#include <xen/hvm/ioreq.h> #include <xen/memory.h> asm ( @@ -222,9 +223,12 @@ static void pci_setup(void) /* PIIX4 ACPI PM. Special device with special PCI config space. */ ASSERT((vendor_id == 0x8086) && (device_id == 0x7113)); pci_writew(devfn, 0x20, 0x0000); /* No smb bus IO enable */ + pci_writew(devfn, 0xd2, 0x0000); /* No smb bus IO enable */ pci_writew(devfn, 0x22, 0x0000); pci_writew(devfn, 0x3c, 0x0009); /* Hardcoded IRQ9 */ pci_writew(devfn, 0x3d, 0x0001); + pci_writel(devfn, 0x40, ACPI_PM1A_EVT_BLK_ADDRESS | 1); + pci_writeb(devfn, 0x80, 0x01); /* enable PM io space */ break; case 0x0101: if ( vendor_id == 0x8086 ) diff --git a/xen/include/public/hvm/ioreq.h b/xen/include/public/hvm/ioreq.h index 0c10c08..8c11767 100644 --- a/xen/include/public/hvm/ioreq.h +++ b/xen/include/public/hvm/ioreq.h @@ -100,11 +100,21 @@ struct buffered_piopage { }; #endif /* defined(__ia64__) */ -#define ACPI_PM1A_EVT_BLK_ADDRESS 0x0000000000001f40 +/* + * Value used by old qemu-dm, there have been replace to match + * the QEMU BIOS. + */ +#define ACPI_PM1A_EVT_BLK_ADDRESS_OLD 0x0000000000001f40 +#define ACPI_PM1A_CNT_BLK_ADDRESS_OLD (ACPI_PM1A_EVT_BLK_ADDRESS_OLD + 0x04) +#define ACPI_PM_TMR_BLK_ADDRESS_OLD (ACPI_PM1A_EVT_BLK_ADDRESS_OLD + 0x08) +#define ACPI_GPE0_BLK_ADDRESS_OLD (ACPI_PM_TMR_BLK_ADDRESS_OLD + 0x20) +#define ACPI_GPE0_BLK_LEN_OLD 0x08 + +#define ACPI_PM1A_EVT_BLK_ADDRESS 0x000000000000b000 #define ACPI_PM1A_CNT_BLK_ADDRESS (ACPI_PM1A_EVT_BLK_ADDRESS + 0x04) #define ACPI_PM_TMR_BLK_ADDRESS (ACPI_PM1A_EVT_BLK_ADDRESS + 0x08) -#define ACPI_GPE0_BLK_ADDRESS (ACPI_PM_TMR_BLK_ADDRESS + 0x20) -#define ACPI_GPE0_BLK_LEN 0x08 +#define ACPI_GPE0_BLK_ADDRESS (0x000000000000afe0) +#define ACPI_GPE0_BLK_LEN 0x04 #endif /* _IOREQ_H_ */ -- 1.7.1 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |