Re: [Xen-devel] 2.6.32.16: hvm domU boot - oops at add_pin_to_irq_node_nopanic

[Bruce Edge <bruce.edge@xxxxxxxxx>]

On Mon, Jul 12, 2010 at 5:52 AM, Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> wrote:

Dropped xen-devel.

On Mon, 12 Jul 2010, Stefano Stabellini wrote:
> This is really concerning; however considering that you have
> CONFIG_XEN_PLATFORM_PCI disabled in your config and blkfront is not
> loaded I cannot see how pv on hvm would have caused it.
> Without CONFIG_XEN_PLATFORM_PCI pv drivers don't load so you don't
> really have many benefits (or risks); you should enable
> CONFIG_XEN_PLATFORM_PCI too in order to have the performance
> improvements.
> Once you do that you need to change your root= command line option to
> root=/dev/xvda1 because the partition naming scheme of blkfront is
> xvd*.
> If you have data corruptions because of blkfront, check that blkfront
> and the emulated IDE disks (/dev/hd*) are not enabled simultaneously,
> if they are please let me know.
>

Only now I actually pushed the version with the fix (the branch is still
2.6.34-pvhvm-v6), sorry for the time lag.

It works!!!

What's the prognosis regarding getting this pv-on-hvm change set integrated into a more mainline branch in the near future?

Thanks for the help Stefano.

Here's the boot seq if it's of any benefit to anyone:

Starting up ...

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Linux version 2.6.34 (root@tonic) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Mon Jul 12 10:07:52 PDT 2010

[    0.000000] Command line: root=/dev/xvda1 ro   bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8

[    0.000000] BIOS-provided physical RAM map:

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[    0.000000]  BIOS-e820: 0000000000100000 - 0000000080000000 (usable)

[    0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] DMI 2.4 present.

[    0.000000] No AGP bridge found

[    0.000000] last_pfn = 0x80000 max_arch_pfn = 0x400000000

[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] modified physical RAM map:

[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)

[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)

[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)

[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)

[    0.000000]  modified: 0000000000100000 - 0000000080000000 (usable)

[    0.000000]  modified: 00000000fc000000 - 0000000100000000 (reserved)

[    0.000000] found SMP MP-table at [ffff8800000fbc40] fbc40

[    0.000000] init_memory_mapping: 0000000000000000-0000000080000000

[    0.000000] RAMDISK: 37788000 - 37ff0000

[    0.000000] ACPI: RSDP 00000000000ea020 00024 (v02    Xen)

[    0.000000] ACPI: XSDT 00000000fc012cb0 00034 (v01    Xen      HVM 00000000 HVML 00000000)

[    0.000000] ACPI: FACP 00000000fc012ad0 000F4 (v04    Xen      HVM 00000000 HVML 00000000)

[    0.000000] ACPI: DSDT 00000000fc002c40 0FE0B (v02    Xen      HVM 00000000 INTL 20081204)

[    0.000000] ACPI: FACS 00000000fc002c00 00040

[    0.000000] ACPI: APIC 00000000fc012bd0 000D8 (v02    Xen      HVM 00000000 HVML 00000000)

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at 0000000000000000-0000000080000000

[    0.000000] Initmem setup node 0 0000000000000000-0000000080000000

[    0.000000]   NODE_DATA [0000000001ccc0c0 - 0000000001cd10bf]

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA      0x00000010 -> 0x00001000

[    0.000000]   DMA32    0x00001000 -> 0x00100000

[    0.000000]   Normal   empty

[    0.000000] Movable zone start PFN for each node

[    0.000000] early_node_map[2] active PFN ranges

[    0.000000]     0: 0x00000010 -> 0x0000009f

[    0.000000]     0: 0x00000100 -> 0x00080000

[    0.000000] ACPI: PM-Timer IO Port: 0x1f48

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)

[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)

[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] SMP: Allowing 15 CPUs, 14 hotplug CPUs

[    0.000000] Xen version 4.0.

[    0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.

[    0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.

[    0.000000] You might have to change the root device

[    0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]

[    0.000000] in your root= kernel command line option

[    0.000000] Xen doesn't support pvclock on HVM,disable pv timer

[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7c000000)

[    0.000000] Booting paravirtualized kernel on Xen

[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:15 nr_node_ids:1

[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s90600 r8192 d24088 u131072

[    0.000000] pcpu-alloc: s90600 r8192 d24088 u131072 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 

[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 517007

[    0.000000] Policy zone: DMA32

[    0.000000] Kernel command line: root=/dev/xvda1 ro   bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Checking aperture...

[    0.000000] No AGP bridge found

[    0.000000] Subtract (54 early reservations)

[    0.000000]   #1 [0001000000 - 0001ccbbd8]   TEXT DATA BSS

[    0.000000]   #2 [0037788000 - 0037ff0000]         RAMDISK

[    0.000000]   #3 [0001ccc000 - 0001ccc099]             BRK

[    0.000000]   #4 [00000fbc50 - 0000100000]   BIOS reserved

[    0.000000]   #5 [00000fbc40 - 00000fbc50]    MP-table mpf

[    0.000000]   #6 [000009d800 - 00000fbb70]   BIOS reserved

[    0.000000]   #7 [00000fbb70 - 00000fbc40]    MP-table mpc

[    0.000000]   #8 [0000010000 - 0000012000]      TRAMPOLINE

[    0.000000]   #9 [0000012000 - 0000016000]     ACPI WAKEUP

[    0.000000]   #10 [0000016000 - 0000017000]         PGTABLE

[    0.000000]   #11 [0001ccc0c0 - 0001cd10c0]       NODE_DATA

[    0.000000]   #12 [0001cd10c0 - 0001cd20c0]         BOOTMEM

[    0.000000]   #13 [0000017000 - 0000017180]         BOOTMEM

[    0.000000]   #14 [00024d3000 - 00024d4000]         BOOTMEM

[    0.000000]   #15 [00024d4000 - 00024d5000]         BOOTMEM

[    0.000000]   #16 [0002600000 - 0004200000]        MEMMAP 0

[    0.000000]   #17 [0001cd20c0 - 0001cea0c0]         BOOTMEM

[    0.000000]   #18 [0001cea0c0 - 0001d020c0]         BOOTMEM

[    0.000000]   #19 [0001d03000 - 0001d04000]         BOOTMEM

[    0.000000]   #20 [0001ccbc00 - 0001ccbc43]         BOOTMEM

[    0.000000]   #21 [0001d04000 - 0001d05000]         BOOTMEM

[    0.000000]   #22 [0001ccbc80 - 0001ccbdd0]         BOOTMEM

[    0.000000]   #23 [0001ccbe00 - 0001ccbe68]         BOOTMEM

[    0.000000]   #24 [0001ccbe80 - 0001ccbee8]         BOOTMEM

[    0.000000]   #25 [0001ccbf00 - 0001ccbf68]         BOOTMEM

[    0.000000]   #26 [0001ccbf80 - 0001ccbfe8]         BOOTMEM

[    0.000000]   #27 [0001d020c0 - 0001d02128]         BOOTMEM

[    0.000000]   #28 [0001d02140 - 0001d02160]         BOOTMEM

[    0.000000]   #29 [0001d02180 - 0001d021e1]         BOOTMEM

[    0.000000]   #30 [0001d02200 - 0001d02261]         BOOTMEM

[    0.000000]   #31 [0001e00000 - 0001e1e000]         BOOTMEM

[    0.000000]   #32 [0001e20000 - 0001e3e000]         BOOTMEM

[    0.000000]   #33 [0001e40000 - 0001e5e000]         BOOTMEM

[    0.000000]   #34 [0001e60000 - 0001e7e000]         BOOTMEM

[    0.000000]   #35 [0001e80000 - 0001e9e000]         BOOTMEM

[    0.000000]   #36 [0001ea0000 - 0001ebe000]         BOOTMEM

[    0.000000]   #37 [0001ec0000 - 0001ede000]         BOOTMEM

[    0.000000]   #38 [0001ee0000 - 0001efe000]         BOOTMEM

[    0.000000]   #39 [0001f00000 - 0001f1e000]         BOOTMEM

[    0.000000]   #40 [0001f20000 - 0001f3e000]         BOOTMEM

[    0.000000]   #41 [0001f40000 - 0001f5e000]         BOOTMEM

[    0.000000]   #42 [0001f60000 - 0001f7e000]         BOOTMEM

[    0.000000]   #43 [0001f80000 - 0001f9e000]         BOOTMEM

[    0.000000]   #44 [0001fa0000 - 0001fbe000]         BOOTMEM

[    0.000000]   #45 [0001fc0000 - 0001fde000]         BOOTMEM

[    0.000000]   #46 [0001d02280 - 0001d02288]         BOOTMEM

[    0.000000]   #47 [0001d022c0 - 0001d022c8]         BOOTMEM

[    0.000000]   #48 [0001d02300 - 0001d0233c]         BOOTMEM

[    0.000000]   #49 [0001d02340 - 0001d023b8]         BOOTMEM

[    0.000000]   #50 [0001d023c0 - 0001d024d0]         BOOTMEM

[    0.000000]   #51 [0001d02500 - 0001d02548]         BOOTMEM

[    0.000000]   #52 [0001d02580 - 0001d025c8]         BOOTMEM

[    0.000000]   #53 [0001d05000 - 0001d0d000]         BOOTMEM

[    0.000000] Memory: 2044208k/2097152k available (6087k kernel code, 452k absent, 52492k reserved, 4962k data, 820k init)

[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1

[    0.000000] Hierarchical RCU implementation.

[    0.000000] NR_IRQS:4352 nr_irqs:936

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [ttyS0] enabled

[    0.000000] allocated 20971520 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Fast TSC calibration using PIT

[    0.000000] Detected 2660.070 MHz processor.

[    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.14 BogoMIPS (lpj=26600700)

[    0.024799] Security Framework initialized

[    0.026690] SELinux:  Disabled at boot.

[    0.028686] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.030440] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.033805] Mount-cache hash table entries: 256

[    0.035977] Initializing cgroup subsys ns

[    0.040005] Initializing cgroup subsys cpuacct

[    0.041998] Initializing cgroup subsys memory

[    0.043961] Initializing cgroup subsys devices

[    0.046121] Initializing cgroup subsys freezer

[    0.048266] Initializing cgroup subsys net_cls

[    0.050048] CPU: Unsupported number of siblings 32

[    0.052132] mce: CPU supports 9 MCE banks

[    0.054109] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.

[    0.058398] SMP alternatives: switching to UP code

[    0.074716] ACPI: Core revision 20100121

[    0.092838] ftrace: converting mcount calls to 0f 1f 44 00 00

[    0.095621] ftrace: allocating 22385 entries in 88 pages

[    0.110029] Setting APIC routing to physical flat

[    0.121164] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0

[    0.224288] CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 04

[    0.230000] APIC timer registered as dummy, due to nmi_watchdog=1!

[    0.230000] Brought up 1 CPUs

[    0.230000] Total of 1 processors activated (5320.14 BogoMIPS).

[    0.230000] Testing NMI watchdog ... 

[    0.421963] WARNING: CPU#0: NMI appears to be stuck (0->0)!

[    0.425909] Please report this to bugzilla.kernel.org,

[    0.428563] and attach the output of the 'dmesg' command.

[    0.430077] devtmpfs: initialized

[    0.434855] regulator: core version 0.5

[    0.436899] Time: 14:31:52  Date: 07/12/10

[    0.440030] NET: Registered protocol family 16

[    0.442408] ACPI: bus type pci registered

[    0.444765] PCI: Using configuration type 1 for base access

[    0.448079] bio: create slab <bio-0> at 0

[    0.458901] ACPI: Interpreter enabled

[    0.460003] ACPI: (supports S0 S3 S4 S5)

[    0.462335] ACPI: Using IOAPIC for interrupt routing

[    0.562047] ACPI: No dock devices found.

[    0.564056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.568845] ACPI: PCI Root Bridge [PCI0] (0000:00)

[    0.570313] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]

[    0.573642] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]

[    0.577024] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]

[    0.580003] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]

[    0.591995] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,

[    0.591996] * this clock source is slow. Consider trying other clock sources

[    0.600527] pci 0000:00:01.3: quirk: [io  0x1f40-0x1f7f] claimed by PIIX4 ACPI

[    1.024689] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)

[    1.028399] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)

[    1.031347] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)

[    1.034999] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)

[    1.038677] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    1.040003] vgaarb: loaded

[    1.041471] SCSI subsystem initialized

[    1.043481] usbcore: registered new interface driver usbfs

[    1.050014] usbcore: registered new interface driver hub

[    1.052719] usbcore: registered new device driver usb

[    1.055417] ACPI: WMI: Mapper loaded

[    1.057298] PCI: Using ACPI for IRQ routing

[    1.060486] NetLabel: Initializing

[    1.062253] NetLabel:  domain hash size = 128

[    1.064481] NetLabel:  protocols = UNLABELED CIPSOv4

[    1.067047] NetLabel:  unlabeled traffic allowed by default

[    1.070007] Switching to clocksource tsc

[    1.073022] pnp: PnP ACPI init

[    1.074614] ACPI: bus type pnp registered

[    1.119673] pnp: PnP ACPI: found 12 devices

[    1.121816] ACPI: ACPI bus type pnp unregistered

[    1.124186] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved

[    1.127850] system 00:02: [io  0x10c0-0x1141] has been reserved

[    1.130827] system 00:02: [io  0xb044-0xb047] has been reserved

[    1.133821] system 00:03: [io  0x08a0-0x08a3] has been reserved

[    1.136978] system 00:03: [io  0x0cc0-0x0ccf] has been reserved

[    1.140039] system 00:03: [io  0x04d0-0x04d1] has been reserved

[    1.147719] NET: Registered protocol family 2

[    1.150163] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)

[    1.154170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)

[    1.158821] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[    1.162407] TCP: Hash tables configured (established 262144 bind 65536)

[    1.165818] TCP reno registered

[    1.167611] UDP hash table entries: 1024 (order: 3, 32768 bytes)

[    1.170733] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[    1.174072] NET: Registered protocol family 1

[    1.176402] RPC: Registered udp transport module.

[    1.178971] RPC: Registered tcp transport module.

[    1.181366] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    1.184646] pci 0000:00:00.0: Limiting direct PCI/PCI transfers

[    1.187887] pci 0000:00:01.0: PIIX3: Enabling Passive Release

[    1.190870] pci 0000:00:01.0: Activating ISA DMA hang workarounds

[    1.194602] Trying to unpack rootfs image as initramfs...

[    1.338937] Freeing initrd memory: 8608k freed

[    1.343521] Scanning for low memory corruption every 60 seconds

[    1.348211] audit: initializing netlink socket (disabled)

[    1.352210] type=2000 audit(1278945112.348:1): initialized

[    1.367150] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    1.373046] VFS: Disk quotas dquot_6.5.2

[    1.375286] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    1.379351] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).

[    1.382689] fuse init (API version 7.13)

[    1.384785] msgmni has been set to 4009

[    1.387046] alg: No test for stdrng (krng)

[    1.389240] io scheduler noop registered

[    1.391250] io scheduler deadline registered

[    1.393472] io scheduler cfq registered (default)

[    1.395971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.399000] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.402404] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[    1.406189] ACPI: Power Button [PWRF]

[    1.408271] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1

[    1.411977] ACPI: Sleep Button [SLPF]

[    1.462619] xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28

[    1.466752] Grant table initialized

[    1.470805] Linux agpgart interface v0.103

[    1.473783] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.478529] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    1.483405] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[    1.486931] brd: module loaded

[    1.488975] loop: module loaded

[    1.491170] scsi0 : ata_piix

[    1.492711] scsi1 : ata_piix

[    1.494254] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc560 irq 14

[    1.497891] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc568 irq 15

[    1.503284] Fixed MDIO Bus: probed

[    1.505095] PPP generic driver version 2.4.2

[    1.507454] tun: Universal TUN/TAP device driver, 1.6

[    1.510087] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>

[    1.513301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.516668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.519982] uhci_hcd: USB Universal Host Controller Interface driver

[    1.523274] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23

[    1.527150] uhci_hcd 0000:00:01.2: UHCI Host Controller

[    1.529962] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1

[    1.533962] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c540

[    1.537852] hub 1-0:1.0: USB hub found

[    1.539780] hub 1-0:1.0: 2 ports detected

[    1.542008] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    1.547743] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.550336] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.552952] mice: PS/2 mouse device common for all mice

[    1.556366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2

[    1.560923] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[    1.564060] rtc0: alarms up to one day, 114 bytes nvram

[    1.566955] device-mapper: uevent: version 1.0.3

[    1.569939] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx

[    1.574228] device-mapper: multipath: version 1.1.1 loaded

[    1.577193] device-mapper: multipath round-robin: version 1.0.0 loaded

[    1.580717] cpuidle: using governor ladder

[    1.582818] cpuidle: using governor menu

[    1.585035] TCP cubic registered

[    1.586825] NET: Registered protocol family 10

[    1.589525] lo: Disabled Privacy Extensions

[    1.591810] NET: Registered protocol family 17

[    1.594163] registered taskstats version 1

[    1.597829] XENBUS: Device with no driver: device/vbd/51712

[    1.600642] XENBUS: Device with no driver: device/vif/0

[    1.603286] XENBUS: Device with no driver: device/pci/0

[    1.605979] XENBUS: Device with no driver: device/console/0

[    1.609003]   Magic number: 2:868:535

[    1.610883] bdi 1:13: hash matches

[    1.612663] rtc_cmos 00:05: setting system clock to 2010-07-12 14:31:53 UTC (1278945113)

[    1.616885] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    1.619998] EDD information not available.

[    1.661022] Freeing unused kernel memory: 820k freed

[    1.666457] Write protecting the kernel read-only data: 10240k

[    1.672191] Freeing unused kernel memory: 36k freed

[    1.675309] Freeing unused kernel memory: 1384k freed

Loading, please wait...

Begin: Loading essential drivers... ...

[    1.690947] udev: starting version 151

[    1.741388] Initialising Xen virtual ethernet driver.

[    1.782675] blkfront: xvda: barriers enabled

[    1.785496]  xvda: xvda1 xvda2 <

[    1.800821] FDC 0 is a S82078B

[    1.803948]  xvda5 >

[    1.857955] usb 1-2: new full speed USB device using uhci_hcd and address 2

FATAL: Error inserting xen_kbdfront (/lib/modules/2.6.34/kernel/drivers/input/xen-kbdfront.ko): No such device

FATAL: Error inserting xen_fbfront (/lib/modules/2.6.34/kernel/drivers/video/xen-fbfront.ko): No such device

Done.

Begin: Running /scripts/init-premount ...

Done.

Begin: Mounting root file system... ...

Begin: Running /scripts/local-top ...

Done.

[    1.937943] Clockevents: could not switch to one-shot mode: lapic is not functional.

[    1.947178] Could not switch to high resolution mode on CPU 0

Begin: Running /scripts/local-premount ...

Done.

[    1.976747] EXT4-fs (xvda1): mounted filesystem with ordered data mode

Begin: Running /scripts/local-bottom ...

Done.

Done.

Begin: Running /scripts/init-bottom ...

Done.

init: ureadahead main process (302) terminated with status 5

[    5.056614] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr

fsck from util-linux-ng 2.17.2

e2fsck 1.41.11 (14-Mar-2010)

/dev/xvda1: clean, 77430/288576 files, 391507/1153280 blocks

 * Enable login on console                                               [ OK ] 

 * Check for hostname changes...                                         [ OK ] 

 * Get system service addresses                                                 mount.nfs: an incorrect mount option was specified

mount.nfs: an incorrect mount option was specified

                                                                         [ OK ]

 * Setting sensors limits                                                       No sensors found!

Make sure you loaded all the kernel drivers you need.

Try sensors-detect to find out which these are.

No sensors found!

Make sure you loaded all the kernel drivers you need.

Try sensors-detect to find out which these are.

                                                                         [ OK ]

 * Initializing random number generator...                               [ OK ] 

 * Setting up X server socket directory /tmp/.X11-unix...                [ OK ] 

 * Setting up ICE socket directory /tmp/.ICE-unix...                     [ OK ] 

 * Not starting fancontrol; run pwmconfig first.

 * Starting internet superserver inetd                                   [ OK ] 

Starting openntpd:  * Starting network management services:                      * Starting the system activity data collector sadc                                                                          [ OK ] 

 * Setting core file location...                                         [ OK ] 

 * Restoring resolver state...                                           [ OK ] 

 * Checking tomcat configuration

   ...done.

 * Starting Tomcat servlet engine tomcat6                                       Using CATALINA_BASE:   /var/lib/tomcat6

Using CATALINA_HOME:   /usr/share/tomcat6

Using CATALINA_TMPDIR: /tmp/tomcat6-tmp

Using JRE_HOME:        /usr/lib/jvm/java-6-openjdk

Using CLASSPATH:       /usr/share/tomcat6/bin/bootstrap.jar

                                                                         [ OK ]

Starting statistics collection and monitoring daemon: collectd.

 * Recording successful boot for GRUB

   ...done.

 * Running local boot scripts (/etc/rc.local)                            [ OK ] 

mountall: Plymouth command failed

mountall: Disconnected from Plymouth

6.0.14-01

dpm login: root

Password: 

Last login: Mon Jul 12 10:27:17 EDT 2010 on ttyS0

Linux kaan-01-dpm 2.6.34 #1 SMP Mon Jul 12 10:07:52 PDT 2010 x86_64 GNU/Linux

DPM-8800 6.0.14-01

Welcome to Ubuntu!

 * Documentation:  https://help.ubuntu.com/

kaan-01-dpm:~# lspci

00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)

00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]

00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]

00:01.2 USB Controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01)

00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)

00:02.0 VGA compatible controller: Cirrus Logic GD 5446

00:03.0 Class ff80: XenSource, Inc. Xen Platform Device (rev 01)

00:05.0 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 05)

00:06.0 Fibre Channel: PMC-Sierra Inc. Device 8032 (rev 05)

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel