[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [INFO] Setting up bridges in Debian /etc/network/interfaces
Well, there at least is one configuration that does work. If someone else wants to do some more testing to find out the minimum text required, feel free. :-) -George On Fri, Jun 25, 2010 at 4:07 PM, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote: > On Fri, 2010-06-25 at 16:00 +0100, George Dunlap wrote: >> OK, after a bit of playing around, I managed to figure out how to set >> up /etc/network/interfaces without the network-bridge script. Below >> is an example system that has 2 nics, one with a dynamic IP address >> and one with a static IP, and two bridges, one for each nic. >> Hopefully it will be of help to those affected by the xencommons / >> xend config change. :-) > > There was an example added to the xend-config.sxp file in the commit > which made these changes (I missed it at first too). > > I don't think the references to "allow-hotplug ethX" and "iface ethX > inet manual" are necessary. All that should be necessary is the "auto > xenbrX" and the "iface xenbrX ..." bits which you have. e.g. > >> auto lo xenbr0 xenbr1 >> iface lo inet loopback > [...snip unneeded stuff...] >> iface xenbr0 inet dhcp >> bridge_ports eth0 >> >> iface xenbr1 inet static >> address 192.168.1.1 >> netmask 255.255.255.0 >> network 192.168.1.0 >> broadcast 192.168.1.255 >> bridge_ports eth1 > > It's also probably worth drawing attention to the interfaces(5) and > bridge-utils-interfaces(5) man pages. > > Ian. > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-devel > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |