|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] domU boot time Oops: 0000 [#1] SMP with backtrace
On Sun, Jun 20, 2010 at 07:21:01AM -0700, Bruce Edge wrote: > On Sun, Jun 20, 2010 at 1:53 AM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote: > > On Sat, Jun 19, 2010 at 04:19:04PM -0700, Bruce Edge wrote: > > Pasi, thanks for the updated configs.* > > Running both dom0 and domU with this config applied to > the*2.6.32.15 > > pvops*tree and xen 4.0.1.rc3pre*still Oops's on hvm domU's. > > > > In HVM guests you should really run whatever is the default kernel in > the distro you install there? > These kernel's are (mainly) meant for PV guests, aka dom0 and PV domU. > > Isn't the idea behind the pvops kernel is that you don't need a different > kernel version for every application? > Or is the hvm guest the one exception to the run-anywhere applicability of > the pvops kernel? > This is for an ubuntu based embedded system so I'd like to be able to use > the same kernel for dom0 and domU. > We will eventually transition to a pv domU, but currently our pci drivers > don't work in a pv environment so right now I need an hvm domU. > Thanks for your help Pasi. > The whole point of HVM is that you don't need to have a special kernel there! So you can use the whatever *default* kernel the distro has. If you want, you CAN use the pvops kernel there aswell.. latest versions even have the pv-on-hvm drivers. -- Pasi > -Bruce > > > > It seems to be a problem with the domU because I can run 2.6.30 > bare-metal > > kernels OK.* > > I've*seen other thread here that indicate there are problems with > > 2.6.32.15. Should I go back to 2.6.32.10? > > > > latest 2.6.32.15 (as of yesterday) works for me. > > Also, I see a lot of people are sticking with Xen 4.0.1.rc2, are > there > > problems with rc3? > > > > I used xen 4.0.1-rc3-pre as of yesterday. > > -- Pasi > > Are there any kernel boot params that I need to use when using a > pvops > > kernel in hvm mode? > > Here's the pv domU boot seqence: > > Initializing cgroup subsys cpu * * * * * * * * * * * * * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > Linux version 2.6.32.15 (root@kaan) (gcc version 4.3.3 (Ubuntu > > 4.3.3-5ubuntu4) ) #1 SMP Sat Jun 19 09:15:07 PDT 2010 * * * * * * * > * > > Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15 root=/dev/sda1 ro > > bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0 > > console=ttyS0,115200n8 selinux=0 cgroup_disable=memory * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * > > KERNEL supported cpus: > > **Intel GenuineIntel > > **AMD AuthenticAMD > > **Centaur CentaurHauls > > BIOS-provided physical RAM map: > > *BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > *BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > *BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > > *BIOS-e820: 0000000000100000 - 0000000080000000 (usable) > > *BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) > > DMI 2.4 present. > > last_pfn = 0x80000 max_arch_pfn = 0x400000000 > > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > > init_memory_mapping: 0000000000000000-0000000080000000 > > RAMDISK: 3469b000 - 37fef393 > > ACPI: RSDP 00000000000ea020 00024 (v02 * *Xen) > > ACPI: XSDT 00000000fc012cb0 00034 (v01 * *Xen * * *HVM 00000000 > HVML > > 00000000) > > ACPI: FACP 00000000fc012ad0 000F4 (v04 * *Xen * * *HVM 00000000 > HVML > > 00000000) > > ACPI: DSDT 00000000fc002c40 0FE0B (v02 * *Xen * * *HVM 00000000 > INTL > > 20081204) > > ACPI: FACS 00000000fc002c00 00040 > > ACPI: APIC 00000000fc012bd0 000D8 (v02 * *Xen * * *HVM 00000000 > HVML > > 00000000) > > No NUMA configuration found > > Faking a node at 0000000000000000-0000000080000000 > > Bootmem setup node 0 0000000000000000-0000000080000000 > > **NODE_DATA [0000000000009000 - 0000000000020fff] > > **bootmap [0000000000021000 - *0000000000030fff] pages 10 > > (7 early reservations) ==> bootmem [0000000000 - 0080000000] > > **#0 [0000000000 - 0000001000] * BIOS data page ==> [0000000000 - > > 0000001000] > > **#1 [0000006000 - 0000008000] * * * TRAMPOLINE ==> [0000006000 - > > 0000008000] > > **#2 [0001000000 - 000271ce78] * *TEXT DATA BSS ==> [0001000000 - > > 000271ce78] > > **#3 [003469b000 - 0037fef393] * * * * *RAMDISK ==> [003469b000 - > > 0037fef393] > > **#4 [000009fc00 - 0000100000] * *BIOS reserved ==> [000009fc00 - > > 0000100000] > > **#5 [000271d000 - 000271d0a1] * * * * * * *BRK ==> [000271d000 - > > 000271d0a1] > > **#6 [0000008000 - 0000009000] * * * * *PGTABLE ==> [0000008000 - > > 0000009000] > > found SMP MP-table at [ffff8800000fbc40] fbc40 > > Zone PFN ranges: > > **DMA * * *0x00000000 -> 0x00001000 > > **DMA32 * *0x00001000 -> 0x00100000 > > **Normal * 0x00100000 -> 0x00100000 > > Movable zone start PFN for each node > > early_node_map[2] active PFN ranges > > ** *0: 0x00000100 -> 0x00080000 * * * * * * * * * * * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: PM-Timer IO Port: 0x1f48 * * * * * * * * * * * * * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) * * * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47 * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > Using ACPI (MADT) for SMP configuration information * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > SMP: Allowing 15 CPUs, 14 hotplug CPUs * * * * * * * * * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > Xen version 4.0. * * * * * * * * * * * * * * * * * * * * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > Allocating PCI resources starting at 80000000 (gap: > 80000000:7c000000) * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > Booting paravirtualized kernel on Xen * * * * * * * * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1 * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > PERCPU: Embedded 478 pages/cpu @ffff880006000000 s1927128 r8192 > d22568 > > u2097152 * * * * * * * * * * * * * * * * * * * * * * * * * ** > > pcpu-alloc: s1927128 r8192 d22568 u2097152 alloc=1*2097152 * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > Built 1 zonelists in Node order, mobility grouping on. *Total > pages: > > 510779 * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > Policy zone: DMA32 * * * * * * * * * * * * * * * * * * * * * * * * > * * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15 > root=/dev/sda1 ro > > bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0 conso > > le=ttyS0,115200n8 selinux=0 cgroup_disable=memory * * * * * * * * * > * * * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * ** > > init_cpus[0]=1 > > setting init process cpumask to 81757470 > > Disabling memory control group subsystem > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > Initializing CPU#0 > > Checking aperture... > > No AGP bridge found > > Memory: 1932088k/2097152k available (4832k kernel code, 388k > absent, > > 164676k reserved, 3457k data, 3392k init) > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, > Nodes=1 > > Hierarchical RCU implementation. > > NR_IRQS:4352 nr_irqs:936 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > xen map irq failed -38 > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) > > ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) > > Console: colour VGA+ 80x25 > > console [ttyS0] enabled > > Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo > Molnar > > ... MAX_LOCKDEP_SUBCLASSES: *8 > > ... MAX_LOCK_DEPTH: * * * * *48 > > ... MAX_LOCKDEP_KEYS: * * * *8191 > > ... CLASSHASH_SIZE: * * * * *4096 > > ... MAX_LOCKDEP_ENTRIES: * * 16384 > > ... MAX_LOCKDEP_CHAINS: * * *32768 > > ... CHAINHASH_SIZE: * * * * *16384 > > *memory used by lock dependency info: 6367 kB > > *per task-struct memory footprint: 2688 bytes > > Fast TSC calibration using PIT > > Detected 2533.869 MHz processor. > > Calibrating delay loop (skipped), value calculated using timer > frequency.. > > 5067.73 BogoMIPS (lpj=2533869) > > kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All > Rights > > Reserved > > kdb_cmd[0]: defcmd archkdb "" "First line arch debugging" > > kdb_cmd[8]: defcmd archkdbcpu "" "archkdb with only tasks on cpus" > > kdb_cmd[15]: defcmd archkdbshort "" "archkdb with less detailed > backtrace" > > Security Framework initialized > > SELinux: *Disabled at boot. > > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > > Mount-cache hash table entries: 256 > > Initializing cgroup subsys ns > > Initializing cgroup subsys cpuacct > > Initializing cgroup subsys memory > > Initializing cgroup subsys devices > > Initializing cgroup subsys freezer > > Initializing cgroup subsys net_cls > > CPU: L1 I cache: 32K, L1 D cache: 32K > > CPU: L2 cache: 256K > > CPU: L3 cache: 8192K > > CPU 0/0x0 -> Node 0 > > CPU: Unsupported number of siblings 32 > > mce: CPU supports 9 MCE banks > > Performance Events: unsupported p6 CPU model 26 no PMU driver, > software > > events only. > > lockdep: fixing up alternatives. > > SMP alternatives: switching to UP code > > ACPI: Core revision 20090903 > > ftrace: converting mcount calls to 0f 1f 44 00 00 > > ftrace: allocating 24436 entries in 96 pages > > Setting APIC routing to physical flat > > BUG: unable to handle kernel NULL pointer dereference at (null) > > IP: [<ffffffff8102ba2e>] add_pin_to_irq_node_nopanic+0x10/0x81 > > PGD 0* > > Oops: 0000 [#1] SMP* > > last sysfs file:* > > Entering kdb (current=0xffff88007f4c0000, pid 1) on processor 0 > Oops: > > <NULL> > > due to oops @ 0xffffffff8102ba2e > > ** * r15 = 0x0000000000000000 * * *r14 = 0x0000000000000001* > > ** * r13 = 0x0000000000000001 * * *r12 = 0xffffffff81735480* > > ** * *bp = 0xffff88007f4bbe00 * * * bx = 0x0000000000000005* > > ** * r11 = 0xffff88007f4bbe00 * * *r10 = 0xffff88007f4c0000* > > ** * *r9 = 0x0000000000000046 * * * r8 = 0xffff88007f4bbe00* > > ** * *ax = 0xffffffff81735480 * * * cx = 0x0000000000000001* > > ** * *dx = 0x0000000000000000 * * * si = 0x0000000000000000* > > ** * *di = 0x0000000000000000 *orig_ax = 0xffffffffffffffff* > > ** * *ip = 0xffffffff8102ba2e * * * cs = 0x0000000000000010* > > ** flags = 0x0000000000010282 * * * sp = 0xffff88007f4bbdd0* > > ** * *ss = 0x0000000000000018 ®s = 0xffff88007f4bbd38 > > -Bruce > > > > On Sat, Jun 19, 2010 at 8:37 AM, Pasi K*rkk*inen > <[1][2]pasik@xxxxxx> wrote: > > > > On Sat, Jun 19, 2010 at 07:19:32AM -0700, Bruce Edge wrote: > > > * *This is a 2.6.32x pv-ops with essentially pasi's config, > modified > > enough > > > * *to get past the > > > * > > > > *[1][2][3]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > > > * *problem > > > > > > > The latest example .config should work without modifications: > > > > [3][4]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64 > > > > -- Pasi > > > * *Started domain dpm (id=15) > > > * * * * * * * * * * * * * * *Initializing cgroup subsys cpuset > > > * *Initializing cgroup subsys cpu > > > * *Linux version 2.6.32.15 (root@kaan) (gcc version 4.3.3 > (Ubuntu > > > * *4.3.3-5ubuntu4) ) #1 SMP Fri Jun 18 17:01:34 PDT 2010 > > > * *Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15 > > > * *root=UUID=4d2c0dbc-296e-40be-bdbc-955437414fcb ro > > bigphysarea=128000 > > > * *kdb=on nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8 > selinux=0 > > > * *cgroup_disable=memory > > > * *KERNEL supported cpus: > > > * * *Intel GenuineIntel > > > * * *AMD AuthenticAMD > > > * * *Centaur CentaurHauls > > > * *BIOS-provided physical RAM map: > > > * * BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > > * * BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > > * * BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > > > * * BIOS-e820: 0000000000100000 - 0000000080000000 (usable) > > > * * BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) > > > * *DMI 2.4 present. > > > * *last_pfn = 0x80000 max_arch_pfn = 0x400000000 > > > * *x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > > > * *init_memory_mapping: 0000000000000000-0000000080000000 > > > * *RAMDISK: 3469c000 - 37fef46b > > > * *ACPI: RSDP 00000000000ea020 00024 (v02 * *Xen) > > > * *ACPI: XSDT 00000000fc012cb0 00034 (v01 * *Xen * * *HVM > 00000000 > > HVML > > > * *00000000) > > > * *ACPI: FACP 00000000fc012ad0 000F4 (v04 * *Xen * * *HVM > 00000000 > > HVML > > > * *00000000) > > > * *ACPI: DSDT 00000000fc002c40 0FE0B (v02 * *Xen * * *HVM > 00000000 > > INTL > > > * *20081204) > > > * *ACPI: FACS 00000000fc002c00 00040 > > > * *ACPI: APIC 00000000fc012bd0 000D8 (v02 * *Xen * * *HVM > 00000000 > > HVML > > > * *00000000) > > > * *No NUMA configuration found > > > * *Faking a node at 0000000000000000-0000000080000000 > > > * *Bootmem setup node 0 0000000000000000-0000000080000000 > > > * * *NODE_DATA [0000000000009000 - 0000000000020fff] > > > * * *bootmap [0000000000021000 - *0000000000030fff] pages 10 > > > * *(7 early reservations) ==> bootmem [0000000000 - 0080000000] > > > * * *#0 [0000000000 - 0000001000] * BIOS data page ==> > [0000000000 - > > > * *0000001000] > > > * * *#1 [0000006000 - 0000008000] * * * TRAMPOLINE ==> > [0000006000 - > > > * *0000008000] > > > * * *#2 [0001000000 - 00027308b8] * *TEXT DATA BSS ==> > [0001000000 - > > > * *00027308b8] > > > * * *#3 [003469c000 - 0037fef46b] * * * * *RAMDISK ==> > [003469c000 - > > > * *0037fef46b] > > > * * *#4 [000009fc00 - 0000100000] * *BIOS reserved ==> > [000009fc00 - > > > * *0000100000] > > > * * *#5 [0002731000 - 00027310a1] * * * * * * *BRK ==> > [0002731000 - > > > * *00027310a1] > > > * * *#6 [0000008000 - 0000009000] * * * * *PGTABLE ==> > [0000008000 - > > > * *0000009000] > > > * *found SMP MP-table at [ffff8800000fbc40] fbc40 > > > * *Zone PFN ranges: > > > * * *DMA * * *0x00000000 -> 0x00001000 > > > * * *DMA32 * *0x00001000 -> 0x00100000 > > > * * *Normal * 0x00100000 -> 0x00100000 > > > * *Movable zone start PFN for each node > > > * *early_node_map[2] active PFN ranges > > > * * * *0: 0x00000000 -> 0x0000009f > > > * * * *0: 0x00000100 -> 0x00080000 > > > * *ACPI: PM-Timer IO Port: 0x1f48 > > > * *ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > * *ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled) > > > * *ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled) > > > * *ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) > > > * *ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled) > > > * *ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled) > > > * *ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled) > > > * *ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled) > > > * *ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled) > > > * *ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled) > > > * *ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled) > > > * *ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled) > > > * *ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled) > > > * *ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled) > > > * *ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled) > > > * *ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > > > * *IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI > 0-47 > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) > > > * *Using ACPI (MADT) for SMP configuration information > > > * *SMP: Allowing 15 CPUs, 14 hotplug CPUs > > > * *Xen version 4.0. > > > * *PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > > > * *PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > > > * *PM: Registered nosave memory: 00000000000e0000 - > 0000000000100000 > > > * *Allocating PCI resources starting at 80000000 (gap: > > 80000000:7c000000) > > > * *Booting paravirtualized kernel on Xen > > > * *NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1 > > > * *PERCPU: Embedded 478 pages/cpu @ffff880006000000 s1927128 > r8192 > > d22568 > > > * *u2097152 > > > * *pcpu-alloc: s1927128 r8192 d22568 u2097152 alloc=1*2097152 > > > * *pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 > [0] 07 > > > * *pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 > > > * *Built 1 zonelists in Node order, mobility grouping on. > *Total > > pages: > > > * *510779 > > > * *Policy zone: DMA32 > > > * *Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.15 > > > * *root=UUID=4d2c0dbc-296e-40be-bdbc-955437414fcb ro > > bigphysarea=128000 > > > * *kdb=on nmi_watchdog=1 init_cpus=0 console=ttyS0,115200n8 > selinux=0 > > > * *cgroup_disable=memory > > > * *init_cpus[0]=1 > > > * *setting init process cpumask to 81769470 > > > * *Disabling memory control group subsystem > > > * *PID hash table entries: 4096 (order: 3, 32768 bytes) > > > * *Initializing CPU#0 > > > * *Checking aperture... > > > * *No AGP bridge found > > > * *Memory: 1932012k/2097152k available (4878k kernel code, 388k > > absent, > > > * *164752k reserved, 3489k data, 3392k init) > > > * *SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > CPUs=15, > > Nodes=1 > > > * *Hierarchical RCU implementation. > > > * *NR_IRQS:4352 nr_irqs:936 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *xen map irq failed -38 > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level) > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) > > > * *ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) > > > * *Console: colour VGA+ 80x25 > > > * *console [ttyS0] enabled > > > * *Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., > Ingo > > Molnar > > > * *... MAX_LOCKDEP_SUBCLASSES: *8 > > > * *... MAX_LOCK_DEPTH: * * * * *48 > > > * *... MAX_LOCKDEP_KEYS: * * * *8191 > > > * *... CLASSHASH_SIZE: * * * * *4096 > > > * *... MAX_LOCKDEP_ENTRIES: * * 16384 > > > * *... MAX_LOCKDEP_CHAINS: * * *32768 > > > * *... CHAINHASH_SIZE: * * * * *16384 > > > * * memory used by lock dependency info: 6367 kB > > > * * per task-struct memory footprint: 2688 bytes > > > * *Fast TSC calibration using PIT > > > * *Detected 2533.594 MHz processor. > > > * *Calibrating delay loop (skipped), value calculated using > timer > > frequency.. > > > * *5067.18 BogoMIPS (lpj=2533594) > > > * *kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright > SGI, All > > Rights > > > * *Reserved > > > * *kdb_cmd[0]: defcmd archkdb *First line arch debugging > > > * *kdb_cmd[8]: defcmd archkdbcpu *archkdb with only tasks on > cpus > > > * *kdb_cmd[15]: defcmd archkdbshort *archkdb with less detailed > > backtrace > > > * *Security Framework initialized > > > * *SELinux: *Disabled at boot. > > > * *Dentry cache hash table entries: 262144 (order: 9, 2097152 > bytes) > > > * *Inode-cache hash table entries: 131072 (order: 8, 1048576 > bytes) > > > * *Mount-cache hash table entries: 256 > > > * *Initializing cgroup subsys ns > > > * *Initializing cgroup subsys cpuacct > > > * *Initializing cgroup subsys memory > > > * *Initializing cgroup subsys devices > > > * *Initializing cgroup subsys freezer > > > * *Initializing cgroup subsys net_cls > > > * *CPU: L1 I cache: 32K, L1 D cache: 32K > > > * *CPU: L2 cache: 256K > > > * *CPU: L3 cache: 8192K > > > * *CPU 0/0x0 -> Node 0 > > > * *CPU: Unsupported number of siblings 32 > > > * *mce: CPU supports 9 MCE banks > > > * *Performance Events: unsupported p6 CPU model 26 no PMU > driver, > > software > > > * *events only. > > > * *lockdep: fixing up alternatives. > > > * *SMP alternatives: switching to UP code > > > * *ACPI: Core revision 20090903 > > > * *ftrace: converting mcount calls to 0f 1f 44 00 00 > > > * *ftrace: allocating 24649 entries in 97 pages > > > * *Setting APIC routing to physical flat > > > * *BUG: unable to handle kernel NULL pointer dereference at > (null) > > > * *IP: [<ffffffff8102ba2e>] > add_pin_to_irq_node_nopanic+0x10/0x81 > > > * *PGD 0 > > > * *Oops: 0000 [#1] SMP > > > * *last sysfs file: > > > * *Entering kdb (current=0xffff88007f4c0000, pid 1) on > processor 0 > > Oops: > > > * *<NULL> > > > * *due to oops @ 0xffffffff8102ba2e > > > * * * * r15 = 0x0000000000000000 * * *r14 = 0x0000000000000001 > > > * * * * r13 = 0x0000000000000001 * * *r12 = 0xffffffff81747480 > > > * * * * *bp = 0xffff88007f4bbe00 * * * bx = 0x0000000000000005 > > > * * * * r11 = 0xffff88007f4bbe00 * * *r10 = 0xffff88007f4c0000 > > > * * * * *r9 = 0x0000000000000046 * * * r8 = 0xffff88007f4bbe00 > > > * * * * *ax = 0xffffffff81747480 * * * cx = 0x0000000000000001 > > > * * * * *dx = 0x0000000000000000 * * * si = 0x0000000000000000 > > > * * * * *di = 0x0000000000000000 *orig_ax = 0xffffffffffffffff > > > * * * * *ip = 0xffffffff8102ba2e * * * cs = 0x0000000000000010 > > > * * * flags = 0x0000000000010282 * * * sp = 0xffff88007f4bbdd0 > > > * * * * *ss = 0x0000000000000018 ®s = 0xffff88007f4bbd38 > > > * *[0]kdb> > > > * *[0]kdb> > > > * *[0]kdb> > > > * *[0]kdb> bt > > > * *Stack traceback for pid 1 > > > * *0xffff88007f4c0000 * * * *1 * * * *0 *1 * *0 * R > > *0xffff88007f4c0560 > > > * **swapper > > > * *sp * * * * * * * *ip * * * * * * * *Function (args) > > > * *bb_parse_opcode: no match at [kernel]kdb_save_running > > 0xffffffff8124668f - > > > * *'push' > > > * *bb_parse_opcode: no match at [kernel]kdb_save_running > > 0xffffffff81246690 - > > > * *'mov' > > > * *bb_parse_opcode: no match at [kernel]kdb_save_running > > 0xffffffff81246693 - > > > * *'nop' > > > * *bb_parse_opcode: no match at [kernel]kdb_save_running > > 0xffffffff81246695 - > > > * *'add' > > > * *bb_parse_opcode: no match at [kernel]kdb_save_running > > 0xffffffff81246698 - > > > * *'mov' > > > * *kdb_bb: address 0xffff88007f4bba48 not recognised > > > * *Using old style backtrace, unreliable with no arguments > > > * *sp * * * * * * * *ip * * * * * * * *Function (args) > > > * *0xffff88007f4bbdb8 0xffffffff8102ba2e > > add_pin_to_irq_node_nopanic+0x10 > > > * *0xffff88007f4bbe08 0xffffffff8102c9a1 > add_pin_to_irq_node+0xe > > > * *0xffff88007f4bbe18 0xffffffff81a162fb > setup_IO_APIC_irqs+0x1a4 > > > * *0xffff88007f4bbe68 0xffffffff81a163c7 setup_IO_APIC+0x43 > > > * *0xffff88007f4bbe88 0xffffffff81a11a74 > native_smp_prepare_cpus+0x1d7 > > > * *0xffff88007f4bbed8 0xffffffff81a048a6 kernel_init+0x75 > > > * *0xffff88007f4bbf48 0xffffffff81013faa child_rip+0xa > > > * *[0]kdb> > > > * *[0]kdb> > > > * *[0]kdb> > > > * *[0]kdb> > > > * *This domU works with bare-metal kernels, this is the first > time > > I've > > > * *attempted to use pv-ops kernel for this domU. > > > * *-Bruce > > > > > > References > > > > > > * *Visible links > > > * *1. > > > > [4][5]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > > > _______________________________________________ > > > Xen-devel mailing list > > > [5][6]Xen-devel@xxxxxxxxxxxxxxxxxxx > > > [6][7]http://lists.xensource.com/xen-devel > > > > References > > > > Visible links > > 1. mailto:[8]pasik@xxxxxx > > 2. > > [9]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > > 3. > > [10]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64 > > 4. > > [11]http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > > 5. mailto:[12]Xen-devel@xxxxxxxxxxxxxxxxxxx > > 6. [13]http://lists.xensource.com/xen-devel > > _______________________________________________ > > Xen-devel mailing list > > [14]Xen-devel@xxxxxxxxxxxxxxxxxxx > > [15]http://lists.xensource.com/xen-devel > > References > > Visible links > 1. mailto:pasik@xxxxxx > 2. mailto:pasik@xxxxxx > 3. > http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > 4. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64 > 5. > http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > 6. mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx > 7. http://lists.xensource.com/xen-devel > 8. mailto:pasik@xxxxxx > 9. > http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > 10. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.15-pvops-dom0-xen-stable-x86_64 > 11. > http://old.nabble.com/Re:--Xen-users--xen-stable-2.6.32.x-compilation-failure-in-do_hvm_suspend()-td28550826.html > 12. mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx > 13. http://lists.xensource.com/xen-devel > 14. mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx > 15. http://lists.xensource.com/xen-devel > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |