|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: [Pkg-xen-devel] Problems with PCI pass-through
On Sat, Jun 05, 2010 at 12:42:15AM +0200, Thomas Schwinge wrote: > Hello! > > As I'm writing in > <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/2010-May/002782.html> > I'm having problems with PCI pass-through. > > It doesn't matter whether I'm using a 3.4 or 4.0 hypervisor (Debian > packages). Also I tested two different kernels (both .32 ones). > > > Some more details: > > On Sat, May 29, 2010 at 03:32:46PM +0300, Pasi Kärkkäinen wrote: > > On Fri, May 28, 2010 at 11:18:56PM +0200, Thomas Schwinge wrote: > > > I'm having problems getting PCI pass-through to work. > > > > > > This is on a AMD64 system, paravirtualized with xen-hypervisor-4.0-amd64 > > > 4.0.0-1~experimental.1, dom0: linux-image-2.6.32-5-xen-amd64 2.6.32-12. > > > > Can you try grabbing a kernel from Jeremy's xen.git xen/stable-2.6.32.x > > branch > > and compiling it.. ? > > I'll do that in case that the following doesn't yield an answer: > > > Just yesterday there was an user on ##xen telling it worked OK for him. > > Other than that.. dunno really. > > > > What's the Xen PCI backend mode on dom0 kernel .config? > > It's the same for the dom0 and domU: > > $ < /boot/config-2.6.32-5-xen-amd64 grep -i xen | grep -i pci > CONFIG_XEN_DOM0_PCI=y > # CONFIG_XEN_PCI_PASSTHROUGH is not set > CONFIG_PCI_XEN=y > CONFIG_XEN_PCIDEV_FRONTEND=y > CONFIG_XEN_PCIDEV_BACKEND=y > CONFIG_XEN_PCIDEV_BACKEND_VPCI=y > # CONFIG_XEN_PCIDEV_BACKEND_PASS is not set > Try using CONFIG_XEN_PCIDEV_BACKEND_PASS instead of CONFIG_XEN_PCIDEV_BACKEND_VPCI, maybe that helps.. dunno. -- Pasi > # CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set > # CONFIG_XEN_PCIDEV_BACKEND_CONTROLLER is not set > # CONFIG_XEN_PCIDEV_BE_DEBUG is not set > # CONFIG_XEN_PLATFORM_PCI is not set > > That seems correct to me. Right? > > > Here's how I boot the dom0: > > multiboot /boot/xen-4.0-amd64.gz noreboot com1=38400,8n1 > vga=current,keep console=com1,vga loglvl=all guest_loglvl=all console_to_ring > module /boot/vmlinuz-2.6.32-5-xen-amd64 > /boot/vmlinuz-2.6.32-5-xen-amd64 xen-pciback.hide=(00:02.7) > root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug > module /boot/initrd.img-2.6.32-5-xen-amd64 > /boot/initrd.img-2.6.32-5-xen-amd64 > > domU: > > kernel = '/boot/vmlinuz-2.6.32-5-xen-686' > ramdisk = '/boot/initrd.img-2.6.32-5-xen-686' > memory = 456 > name = 'kepler' > root = '/dev/xvda ro' > vif = [ 'mac=00:16:3e:23:85:35, bridge=br0' ] > disk = [ 'phy:vg1/kepler-root,xvda,w', 'phy:vg1/kepler-swap,xvdb,w', > 'phy:vg1/kepler-data,xvdc,w'] > extra = 'iommu=soft swiotlb=force' > pci = [ '0000:00:02.7' ] > > Boot log for the dom0: > > (XEN) Xen version 4.0.0 (Debian 4.0.0-1~experimental.2) > (waldi@xxxxxxxxxx) (gcc version 4.4.4 (Debian 4.4.4-3) ) Fri May 28 11:28:13 > UTC 2010 > (XEN) Command line: com1=38400,8n1 vga=current,keep console=com1,vga > loglvl=all guest_loglvl=all console_to_ring > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) Disc information: > (XEN) Found 2 MBR signatures > (XEN) Found 2 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009dc00 (usable) > (XEN) 000000000009dc00 - 00000000000a0000 (reserved) > (XEN) 00000000000d6000 - 00000000000d8000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000009dee0000 (usable) > (XEN) 000000009dee0000 - 000000009deef000 (ACPI data) > (XEN) 000000009deef000 - 000000009df00000 (ACPI NVS) > (XEN) 000000009df00000 - 00000000a0000000 (reserved) > (XEN) 00000000fec00000 - 00000000fec10000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000fff00000 - 0000000100000000 (reserved) > (XEN) System RAM: 2480MB (2539720kB) > (XEN) ACPI: RSDP 000F7350, 0024 (r2 PTLTD ) > (XEN) ACPI: XSDT 9DEEB7E4, 004C (r1 PTLTD XSDT 50000 LTP > 0) > (XEN) ACPI: FACP 9DEEB8A4, 00F4 (r3 FSC ÷Pè0 50000 > F4240) > (XEN) ACPI: DSDT 9DEEB998, 34FB (r1 FSC D2030 50000 MSFT > 2000002) > (XEN) ACPI: FACS 9DEEFFC0, 0040 > (XEN) ACPI: SSDT 9DEEEE93, 00B5 (r1 PTLTD POWERNOW 50000 LTP > 1) > (XEN) ACPI: APIC 9DEEEF48, 0050 (r1 PTLTD APIC 50000 LTP > 0) > (XEN) ACPI: MCFG 9DEEEF98, 0040 (r1 PTLTD MCFG 50000 LTP > 0) > (XEN) ACPI: BOOT 9DEEEFD8, 0028 (r1 PTLTD $SBFTBL$ 50000 LTP > 1) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-000000009dee0000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000f73b0 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0xf008 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f004,0], pm1x_evt[f000,0] > (XEN) ACPI: wakeup_vec[9deeffcc], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > (XEN) Processor #0 15:15 APIC version 16 > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 2 > (XEN) PCI: Not using MMCONFIG. > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Detected 1800.096 MHz processor. > (XEN) Initing memory sharing. > (XEN) CPU0: AMD Flush Filter disabled > (XEN) AMD K8 machine check reporting enabled > (XEN) AMD-Vi: IOMMU not found! > (XEN) I/O virtualisation disabled > (XEN) Total of 1 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 > (XEN) Platform timer is 3.579MHz ACPI PM Timer > ÿ(XEN) Brought up 1 CPUs > (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16c1000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000094000000->0000000098000000 (589068 pages to > be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff816c1000 > (XEN) Init. ramdisk: ffffffff816c1000->ffffffff833ea200 > (XEN) Phys-Mach map: ffffffff833eb000->ffffffff83889860 > (XEN) Start info: ffffffff8388a000->ffffffff8388a4b4 > (XEN) Page tables: ffffffff8388b000->ffffffff838ac000 > (XEN) Boot stack: ffffffff838ac000->ffffffff838ad000 > (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 > (XEN) ENTRY ADDRESS: ffffffff81501200 > (XEN) Dom0 has maximum 1 VCPUs > (XEN) Scrubbing Free RAM: .done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is keeping VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input > to Xen) > (XEN) Freed 164kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-15) > (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 > 06:38:33 UTC 2010 > [ 0.000000] Command line: xen-pciback.hide=(00:02.7) > root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] released 0 pages of unused memory > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 000000000009dc00 (usable) > [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 0000000093d0c000 (usable) > [ 0.000000] Xen: 000000009dee0000 - 000000009deef000 (ACPI data) > [ 0.000000] Xen: 000000009deef000 - 000000009df00000 (ACPI NVS) > [ 0.000000] Xen: 000000009df00000 - 00000000a0000000 (reserved) > [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) > [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved) > [ 0.000000] bootconsole [xenboot0] enabled > [ 0.000000] DMI present. > [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working > around it. > [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 > (usable) ==> (reserved) > [ 0.000000] last_pfn = 0x93d0c max_arch_pfn = 0x400000000 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new > 0x7010600070106 > [ 0.000000] initial memory mapped : 0 - 20000000 > [ 0.000000] init_memory_mapping: 0000000000000000-0000000093d0c000 > [ 0.000000] 0000000000 - 0093d0c000 page 4k > [ 0.000000] kernel direct mapping tables up to 93d0c000 @ 100000-5a3000 > [ 0.000000] RAMDISK: 016c1000 - 033ea200 > [ 0.000000] ACPI: RSDP 00000000000f7350 00024 (v02 PTLTD ) > [ 0.000000] ACPI: XSDT 000000009deeb7e4 0004C (v01 PTLTD ? XSDT > 00050000 LTP 00000000) > [ 0.000000] ACPI: FACP 000000009deeb8a4 000F4 (v03 FSC ÷Pè0? > 00050000 000F4240) > [ 0.000000] ACPI: DSDT 000000009deeb998 034FB (v01 FSC D2030 > 00050000 MSFT 02000002) > [ 0.000000] ACPI: FACS 000000009deeffc0 00040 > [ 0.000000] ACPI: SSDT 000000009deeee93 000B5 (v01 PTLTD POWERNOW > 00050000 LTP 00000001) > [ 0.000000] ACPI: APIC 000000009deeef48 00050 (v01 PTLTD ? APIC > 00050000 LTP 00000000) > [ 0.000000] ACPI: MCFG 000000009deeef98 00040 (v01 PTLTD MCFG > 00050000 LTP 00000000) > [ 0.000000] ACPI: BOOT 000000009deeefd8 00028 (v01 PTLTD $SBFTBL$ > 00050000 LTP 00000001) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] Scanning NUMA topology in Northbridge 24 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at 0000000000000000-0000000093d0c000 > [ 0.000000] Bootmem setup node 0 0000000000000000-0000000093d0c000 > [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] > [ 0.000000] bootmap [0000000000018000 - 000000000002a7a7] pages 13 > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - > 0093d0c000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [000388b000 - 00038ac000] XEN PAGETABLES ==> > [000388b000 - 00038ac000] > [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> > [0000006000 - 0000008000] > [ 0.000000] #3 [0001000000 - 00016a0594] TEXT DATA BSS ==> > [0001000000 - 00016a0594] > [ 0.000000] #4 [00016c1000 - 00033ea200] RAMDISK ==> > [00016c1000 - 00033ea200] > [ 0.000000] #5 [00033eb000 - 000388b000] XEN START INFO ==> > [00033eb000 - 000388b000] > [ 0.000000] #6 [00016a1000 - 00016a11c4] BRK ==> > [00016a1000 - 00016a11c4] > [ 0.000000] #7 [0000100000 - 000057f000] PGTABLE ==> > [0000100000 - 000057f000] > [ 0.000000] found SMP MP-table at [ffff8800000f73b0] f73b0 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000010 -> 0x00001000 > [ 0.000000] DMA32 0x00001000 -> 0x00100000 > [ 0.000000] Normal 0x00100000 -> 0x00100000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000010 -> 0x0000009d > [ 0.000000] 0: 0x00000100 -> 0x00093d0c > [ 0.000000] On node 0 totalpages: 605337 > [ 0.000000] DMA zone: 56 pages used for memmap > [ 0.000000] DMA zone: 1154 pages reserved > [ 0.000000] DMA zone: 2771 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 8222 pages used for memmap > [ 0.000000] DMA32 zone: 593134 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI > 0-0 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 > [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 256 > [ 0.000000] PM: Registered nosave memory: 000000000009d000 - > 000000000009e000 > [ 0.000000] PM: Registered nosave memory: 000000000009e000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at a0000000 (gap: > a0000000:5ec00000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.0.0 (preserve-AD) (dom0) > [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800038e2000 s90008 > r8192 d20584 u118784 > [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] trying to map vcpu_info 0 at ffff8800038ed020, mfn 978ed, > offset 32 > [ 0.000000] cpu 0 using vcpu_info at ffff8800038ed020 > [ 0.000000] Xen: using vcpu_info placement > [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. > Total pages: 595905 > [ 0.000000] Policy zone: DMA32 > [ 0.000000] Kernel command line: xen-pciback.hide=(00:02.7) > root=/dev/mapper/vg0-boole--root ro console=hvc0 earlyprintk=xen debug > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] Initializing CPU#0 > [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880005e00000 > - ffff880009e00000 > [ 0.000000] DMA: software IO TLB at phys 0x5e00000 - 0x9e00000 > [ 0.000000] xen_swiotlb_fixup: buf=ffff880005e00000 size=67108864 > [ 0.000000] xen_swiotlb_fixup: buf=ffff880009e60000 size=32768 > [ 0.000000] Memory: 2274720k/2421808k available (3131k kernel code, > 460k absent, 146628k reserved, 1899k data, 592k init) > [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > CPUs=1, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:4352 nr_irqs:512 > [ 0.000000] xen: --> irq=0 > [ 0.000000] xen: --> irq=1 > [ 0.000000] xen: --> irq=2 > [ 0.000000] xen: --> irq=3 > [ 0.000000] xen: --> irq=4 > [ 0.000000] xen: --> irq=5 > [ 0.000000] xen: --> irq=6 > [ 0.000000] xen: --> irq=7 > [ 0.000000] xen: --> irq=8 > [ 0.000000] xen: --> irq=9 > [ 0.000000] xen: --> irq=10 > [ 0.000000] xen: --> irq=11 > [ 0.000000] xen: --> irq=12 > [ 0.000000] xen: --> irq=13 > [ 0.000000] xen: --> irq=14 > [ 0.000000] xen: --> irq=15 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [hvc0] enabled, bootconsole disabled > [ 0.000000] console [hvc0] enabled, bootconsole disabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] alloc irq_desc for 511 on node 0 > [ 0.000000] alloc kstat_irqs on node 0 > [ 0.000000] Detected 1800.096 MHz processor. > [ 0.004000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3600.19 BogoMIPS (lpj=7200384) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, > 4194304 bytes) > [ 0.007156] Inode-cache hash table entries: 262144 (order: 9, 2097152 > bytes) > [ 0.008971] Mount-cache hash table entries: 256 > [ 0.009697] Initializing cgroup subsys ns > [ 0.010197] Initializing cgroup subsys cpuacct > [ 0.010697] Initializing cgroup subsys devices > [ 0.011198] Initializing cgroup subsys freezer > [ 0.011695] Initializing cgroup subsys net_cls > [ 0.012066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.013057] CPU: L2 Cache: 128K (64 bytes/line) > [ 0.013554] CPU 0/0x0 -> Node 0 > [ 0.014050] tseg: 009df00000 > [ 0.014547] mce: CPU supports 5 MCE banks > (XEN) MCE: MSR 417 is not MCA MSR > (XEN) traps.c:2870: GPF (0000): ffff82c480174806 -> ffff82c4801f6a9d > [ 0.016010] Performance Events: AMD PMU driver. > [ 0.016535] ------------[ cut here ]------------ > [ 0.017038] WARNING: at > /build/buildd-linux-2.6_2.6.32-15-amd64-PisqNL/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/enlighten.c:731 > init_hw_perf_events+0x32d/0x3cd() > [ 0.018524] Hardware name: D2264-A1 > [ 0.019018] Modules linked in: > [ 0.019516] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1 > [ 0.020000] Call Trace: > [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd > [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd > [ 0.020000] [<ffffffff8104fc58>] ? warn_slowpath_common+0x77/0xa3 > [ 0.020000] [<ffffffff81508b0b>] ? init_hw_perf_events+0x32d/0x3cd > [ 0.020000] [<ffffffff813034ec>] ? identify_cpu+0x2ff/0x308 > [ 0.020000] [<ffffffff8100ee0f>] ? xen_restore_fl_direct_end+0x0/0x1 > [ 0.020000] [<ffffffff810e86c1>] ? kmem_cache_alloc+0x8c/0xf0 > [ 0.020000] [<ffffffff81508732>] ? identify_boot_cpu+0x15/0x3e > [ 0.020000] [<ffffffff815087b9>] ? check_bugs+0x9/0x2e > [ 0.020000] [<ffffffff81501cc2>] ? start_kernel+0x3cd/0x3e8 > [ 0.020000] [<ffffffff81503c38>] ? xen_start_kernel+0x649/0x64f > [ 0.020000] ---[ end trace a7919e7f17c0a725 ]--- > [ 0.020000] ... version: 0 > [ 0.020000] ... bit width: 48 > [ 0.020000] ... generic registers: 4 > [ 0.020000] ... value mask: 0000ffffffffffff > [ 0.020000] ... max period: 00007fffffffffff > [ 0.020000] ... fixed-purpose events: 0 > [ 0.020000] ... event mask: 000000000000000f > [ 0.020000] SMP alternatives: switching to UP code > [ 0.020000] Freeing SMP alternatives: 28k freed > [ 0.020000] ACPI: Core revision 20090903 > [ 0.027227] alloc irq_desc for 510 on node 0 > [ 0.027730] alloc kstat_irqs on node 0 > [ 0.028019] alloc irq_desc for 509 on node 0 > [ 0.028515] alloc kstat_irqs on node 0 > [ 0.029016] alloc irq_desc for 508 on node 0 > [ 0.029538] alloc kstat_irqs on node 0 > [ 0.030040] alloc irq_desc for 507 on node 0 > [ 0.030536] alloc kstat_irqs on node 0 > [ 0.031198] Brought up 1 CPUs > [ 0.031727] CPU0 attaching NULL sched-domain. > [ 0.032177] devtmpfs: initialized > [ 0.037032] Grant table initialized > [ 0.037558] regulator: core version 0.5 > [ 0.038139] NET: Registered protocol family 16 > [ 0.038730] alloc irq_desc for 506 on node 0 > [ 0.039228] alloc kstat_irqs on node 0 > [ 0.039933] node 0 link 0: io port [0, fffff] > [ 0.040018] TOM: 00000000a0000000 aka 2560M > [ 0.040517] node 0 link 0: mmio [e0000000, efffffff] > [ 0.041049] node 0 link 0: mmio [a0000, bffff] > [ 0.041549] node 0 link 0: mmio [a0000000, fe0bffff] > [ 0.042049] bus: [00,ff] on node 0 link 0 > [ 0.042545] bus: 00 index 0 io port: [0, ffff] > [ 0.043041] bus: 00 index 1 mmio: [a0000000, fcffffffff] > [ 0.043539] bus: 00 index 2 mmio: [a0000, bffff] > [ 0.044001] ACPI: bus type pci registered > [ 0.044106] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 > - 2 > [ 0.044632] PCI: Not using MMCONFIG. > [ 0.045128] PCI: Using configuration type 1 for base access > [ 0.046525] bio: create slab <bio-0> at 0 > [ 0.048274] ERROR: Unable to locate IOAPIC for GSI 9 > [ 0.048844] ACPI: EC: Look up EC in DSDT > [ 0.054875] ACPI: Interpreter enabled > [ 0.055380] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.055919] ACPI: Using IOAPIC for interrupt routing > [ 0.056055] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 > - 2 > [ 0.058173] PCI: MCFG area at e0000000 reserved in ACPI motherboard > resources > [ 0.059957] PCI: Using MMCONFIG at e0000000 - e02fffff > [ 0.066987] ACPI: No dock devices found. > [ 0.067692] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.068001] pci 0000:00:00.0: reg 10 32bit mmio: > [0xf8000000-0xf9ffffff] > [ 0.068241] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] > [ 0.068746] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] > [ 0.069250] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] > [ 0.069755] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] > [ 0.070259] pci 0000:00:02.5: reg 20 io port: [0x3480-0x348f] > [ 0.070798] pci 0000:00:02.5: PME# supported from D3cold > [ 0.071299] pci 0000:00:02.5: PME# disabled > [ 0.071873] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] > [ 0.072001] pci 0000:00:02.7: reg 14 io port: [0x1000-0x107f] > [ 0.072001] pci 0000:00:02.7: supports D1 D2 > [ 0.072001] pci 0000:00:02.7: PME# supported from D3hot D3cold > [ 0.072001] pci 0000:00:02.7: PME# disabled > [ 0.072001] pci 0000:00:03.0: reg 10 32bit mmio: > [0xfa100000-0xfa100fff] > [ 0.072001] pci 0000:00:03.1: reg 10 32bit mmio: > [0xfa101000-0xfa101fff] > [ 0.072001] pci 0000:00:03.2: reg 10 32bit mmio: > [0xfa102000-0xfa102fff] > [ 0.072001] pci 0000:00:03.3: reg 10 32bit mmio: > [0xfa103000-0xfa103fff] > [ 0.072001] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold > [ 0.072001] pci 0000:00:03.3: PME# disabled > [ 0.072049] pci 0000:00:05.0: reg 10 io port: [0x34b0-0x34b7] > [ 0.072552] pci 0000:00:05.0: reg 14 io port: [0x34a4-0x34a7] > [ 0.073055] pci 0000:00:05.0: reg 18 io port: [0x34a8-0x34af] > [ 0.073560] pci 0000:00:05.0: reg 1c io port: [0x34a0-0x34a3] > [ 0.074067] pci 0000:00:05.0: reg 20 io port: [0x3490-0x349f] > [ 0.074598] pci 0000:00:05.0: reg 24 io port: [0x3400-0x347f] > [ 0.075130] pci 0000:00:05.0: PME# supported from D3cold > [ 0.075630] pci 0000:00:05.0: PME# disabled > [ 0.076001] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold > [ 0.076001] pci 0000:00:06.0: PME# disabled > [ 0.076001] pci 0000:00:09.0: reg 10 io port: [0x1800-0x18ff] > [ 0.076001] pci 0000:00:09.0: reg 14 32bit mmio: > [0xfa105000-0xfa1050ff] > [ 0.076001] pci 0000:00:09.0: supports D1 D2 > [ 0.076001] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold > [ 0.076001] pci 0000:00:09.0: PME# disabled > [ 0.076001] pci 0000:00:0a.0: reg 10 io port: [0x2c00-0x2c07] > [ 0.076001] pci 0000:00:0a.0: reg 14 io port: [0x2800-0x2803] > [ 0.076001] pci 0000:00:0a.0: reg 18 io port: [0x2400-0x2407] > [ 0.076001] pci 0000:00:0a.0: reg 1c io port: [0x2000-0x2003] > [ 0.076001] pci 0000:00:0a.0: reg 20 io port: [0x1c00-0x1c0f] > [ 0.076001] pci 0000:00:0a.0: reg 24 32bit mmio: > [0xfa105400-0xfa1057ff] > [ 0.076001] pci 0000:00:0a.0: reg 30 32bit mmio pref: > [0x000000-0x07ffff] > [ 0.076001] pci 0000:00:0a.0: supports D1 D2 > [ 0.076001] pci 0000:00:0c.0: reg 10 32bit mmio: > [0xfa104000-0xfa104fff] > [ 0.076001] pci 0000:00:0c.0: reg 14 io port: [0x3000-0x303f] > [ 0.076001] pci 0000:00:0c.0: reg 18 32bit mmio: > [0xfa000000-0xfa0fffff] > [ 0.076001] pci 0000:00:0c.0: reg 30 32bit mmio pref: > [0x000000-0x0fffff] > [ 0.076001] pci 0000:00:0c.0: supports D1 D2 > [ 0.076001] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.076001] pci 0000:00:0c.0: PME# disabled > [ 0.076183] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold > [ 0.076684] pci 0000:00:1f.0: PME# disabled > [ 0.077252] pci 0000:01:00.0: reg 10 32bit mmio pref: > [0xf0000000-0xf7ffffff] > [ 0.078248] pci 0000:01:00.0: reg 14 32bit mmio: > [0xfa200000-0xfa21ffff] > [ 0.078752] pci 0000:01:00.0: reg 18 io port: [0x4000-0x407f] > [ 0.079324] pci 0000:01:00.0: supports D1 D2 > [ 0.079887] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] > [ 0.080001] pci 0000:00:01.0: bridge 32bit mmio: > [0xfa200000-0xfa2fffff] > [ 0.080001] pci 0000:00:01.0: bridge 32bit mmio pref: > [0xf0000000-0xf7ffffff] > [ 0.080107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.081105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > [ 0.081739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] > [ 0.082340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT] > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:01.0 > (XEN) PCI add device 00:02.0 > (XEN) PCI add device 00:02.5 > (XEN) PCI add device 00:02.7 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:03.1 > (XEN) PCI add device 00:03.2 > (XEN) PCI add device 00:03.3 > (XEN) PCI add device 00:05.0 > (XEN) PCI add device 00:06.0 > (XEN) PCI add device 00:09.0 > (XEN) PCI add device 00:0a.0 > (XEN) PCI add device 00:0c.0 > (XEN) PCI add device 00:18.0 > (XEN) PCI add device 00:18.1 > (XEN) PCI add device 00:18.2 > (XEN) PCI add device 00:18.3 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 01:00.0 > [ 0.101755] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 > 12 14 15) > [ 0.102921] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 > 12 14 15) > [ 0.104063] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 > 12 14 15) > [ 0.105193] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 > 12 14 15) > [ 0.106346] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 > 12 14 15) > [ 0.107473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 > 12 14 15) > [ 0.108122] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 > 12 14 15) > [ 0.109251] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 > 12 14 15) > [ 0.110378] sync cpu 0 get result 1 max_id 0 > [ 0.110881] alloc irq_desc for 505 on node 0 > [ 0.111378] alloc kstat_irqs on node 0 > [ 0.111933] xen_balloon: Initialising balloon driver with page order 0. > [ 0.112113] vgaarb: device added: > PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.113105] vgaarb: loaded > [ 0.113771] PCI: Using ACPI for IRQ routing > [ 0.114567] Switching to clocksource xen > [ 0.116001] pnp: P[ 2.477802] usbcore: registered new interface > driver usbfs > [ 2.478347] usbcore: registered new interface driver hub > [ 2.488701] usbcore: registered new device driver usb > [ 2.501851] SCSI subsystem initialized > [ 2.538255] libata version 3.00 loaded. > [ 2.539420] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > [ 2.539924] e100: Copyright(c) 1999-2006 Intel Corporation > [ 2.547859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.548444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.548980] xen: registering gsi 19 triggering 0 polarity 1 > [ 2.549484] alloc irq_desc for 19 on node 0 > [ 2.549982] alloc kstat_irqs on node 0 > [ 2.550509] xen: --> irq=19 > [ 2.551015] r8169 0000:00:09.0: PCI INT A -> GSI 19 (level, low) -> > IRQ 19 > [ 2.551554] r8169 0000:00:09.0: no PCI Express capability > [ 2.553032] eth0: RTL8110s at 0xffffc9000062e000, 00:30:05:d3:3e:73, > XID 04000000 IRQ 19 > [ 2.559216] xen: registering gsi 16 triggering 0 polarity 1 > [ 2.559731] alloc irq_desc for 16 on node 0 > [ 2.560019] alloc kstat_irqs on node 0 > [ 2.560770] xen: --> irq=16 > [ 2.561277] e100 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 2.584003] e100 0000:00:0c.0: PME# disabled > [ 2.586782] e100: eth1: e100_probe: addr 0xfa104000, irq 16, MAC addr > 00:02:b3:29:31:eb > [ 2.589890] pata_sis 0000:00:02.5: version 0.5.2 > [ 2.590421] xen: registering gsi 16 triggering 0 polarity 1 > [ 2.590921] xen_allocate_pirq: returning irq 16 for gsi 16 > [ 2.591418] xen: --> irq=16 > [ 2.591950] Already setup the GSI :16 > [ 2.592020] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 2.594650] scsi0 : pata_sis > [ 2.595459] scsi1 : pata_sis > [ 2.596969] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3480 > irq 14 > [ 2.597473] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3488 > irq 15 > [ 2.598658] xen: registering gsi 23 triggering 0 polarity 1 > [ 2.599169] alloc irq_desc for 23 on node 0 > [ 2.599666] alloc kstat_irqs on node 0 > [ 2.600248] xen: --> irq=23 > [ 2.600755] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> > IRQ 23 > [ 2.601778] ehci_hcd 0000:00:03.3: EHCI Host Controller > [ 2.602331] ehci_hcd 0000:00:03.3: new USB bus registered, assigned > bus number 1 > [ 2.603421] ehci_hcd 0000:00:03.3: cache line size of 64 is not > supported > [ 2.603961] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfa103000 > [ 2.612020] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 > [ 2.612590] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.613090] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.614079] usb usb1: Product: EHCI Host Controller > [ 2.614576] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd > [ 2.615074] usb usb1: SerialNumber: 0000:00:03.3 > [ 2.615839] usb usb1: configuration #1 chosen from 1 choice > [ 2.616510] hub 1-0:1.0: USB hub found > [ 2.617077] hub 1-0:1.0: 8 ports detected > [ 2.626539] sata_sil 0000:00:0a.0: version 2.4 > [ 2.627104] xen: registering gsi 17 triggering 0 polarity 1 > [ 2.627609] alloc irq_desc for 17 on node 0 > [ 2.628026] alloc kstat_irqs on node 0 > [ 2.628643] xen: --> irq=17 > [ 2.629151] sata_sil 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 2.630418] scsi2 : sata_sil > [ 2.631215] scsi3 : sata_sil > [ 2.631925] scsi4 : sata_sil > [ 2.632716] scsi5 : sata_sil > [ 2.633389] ata3: SATA max UDMA/100 mmio m1024@0xfa105400 tf > 0xfa105480 irq 17 > [ 2.634412] ata4: SATA max UDMA/100 mmio m1024@0xfa105400 tf > 0xfa1054c0 irq 17 > [ 2.635407] ata5: SATA max UDMA/100 mmio m1024@0xfa105400 tf > 0xfa105680 irq 17 > [ 2.636397] ata6: SATA max UDMA/100 mmio m1024@0xfa105400 tf > 0xfa1056c0 irq 17 > [ 2.654999] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.658482] xen: registering gsi 20 triggering 0 polarity 1 > [ 2.658996] alloc irq_desc for 20 on node 0 > [ 2.659522] alloc kstat_irqs on node 0 > [ 2.660083] xen: --> irq=20 > [ 2.660590] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> > IRQ 20 > [ 2.661618] ohci_hcd 0000:00:03.0: OHCI Host Controller > [ 2.662142] ohci_hcd 0000:00:03.0: new USB bus registered, assigned > bus number 2 > [ 2.663212] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfa100000 > [ 2.718104] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 2.718609] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.719600] usb usb2: Product: OHCI Host Controller > [ 2.720005] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd > [ 2.720005] usb usb2: SerialNumber: 0000:00:03.0 > [ 2.721369] usb usb2: configuration #1 chosen from 1 choice > [ 2.722018] hub 2-0:1.0: USB hub found > [ 2.722555] hub 2-0:1.0: 3 ports detected > [ 2.723274] xen: registering gsi 21 triggering 0 polarity 1 > [ 2.723782] alloc irq_desc for 21 on node 0 > [ 2.724282] alloc kstat_irqs on node 0 > [ 2.724809] xen: --> irq=21 > [ 2.725315] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> > IRQ 21 > [ 2.726364] ohci_hcd 0000:00:03.1: OHCI Host Controller > [ 2.726882] ohci_hcd 0000:00:03.1: new USB bus registered, assigned > bus number 3 > [ 2.727949] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfa101000 > [ 2.782063] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 2.782567] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.783554] usb usb3: Product: OHCI Host Controller > [ 2.784009] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd > [ 2.784009] usb usb3: SerialNumber: 0000:00:03.1 > [ 2.785351] usb usb3: configuration #1 chosen from 1 choice > [ 2.785980] hub 3-0:1.0: USB hub found > [ 2.786518] hub 3-0:1.0: 3 ports detected > [ 2.787216] xen: registering gsi 22 triggering 0 polarity 1 > [ 2.787723] alloc irq_desc for 22 on node 0 > [ 2.788227] alloc kstat_irqs on node 0 > [ 2.788787] xen: --> irq=22 > [ 2.789294] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> > IRQ 22 > [ 2.790538] ohci_hcd 0000:00:03.2: OHCI Host Controller > [ 2.791066] ohci_hcd 0000:00:03.2: new USB bus registered, assigned > bus number 4 > [ 2.792174] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfa102000 > [ 2.850062] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 2.850566] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.851581] usb usb4: Product: OHCI Host Controller > [ 2.852005] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd > [ 2.852005] usb usb4: SerialNumber: 0000:00:03.2 > [ 2.854093] usb usb4: configuration #1 chosen from 1 choice > [ 2.854793] hub 4-0:1.0: USB hub found > [ 2.855334] hub 4-0:1.0: 2 ports detected > [ 2.956031] ata3: SATA link down (SStatus 0 SControl 310) > [ 3.276040] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) > [ 3.300331] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 > [ 3.300834] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth > 0/32) > [ 3.308304] ata4.00: configured for UDMA/100 > [ 3.308982] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ > CR10 PQ: 0 ANSI: 5 > [ 3.628031] ata5: SATA link down (SStatus 0 SControl 310) > [ 3.948039] ata6: SATA link down (SStatus 0 SControl 310) > [ 3.964301] sata_sis 0000:00:05.0: version 1.0 > [ 3.964832] xen: registering gsi 17 triggering 0 polarity 1 > [ 3.965360] xen_allocate_pirq: returning irq 17 for gsi 17 > [ 3.965858] xen: --> irq=17 > [ 3.966356] Already setup the GSI :17 > [ 3.966853] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 3.967848] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset > [ 3.987551] scsi6 : sata_sis > [ 3.988405] scsi7 : sata_sis > [ 3.989439] ata7: SATA max UDMA/133 cmd 0x34b0 ctl 0x34a4 bmdma 0x3490 > irq 17 > [ 3.990463] ata8: SATA max UDMA/133 cmd 0x34a8 ctl 0x34a0 bmdma 0x3498 > irq 17 > [ 3.992764] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 > GB/465 GiB) > [ 3.993866] sd 3:0:0:0: [sda] Write Protect is off > [ 3.994392] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.994927] sd 3:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.996916] sda: sda1 > [ 4.035345] sd 3:0:0:0: [sda] Attached SCSI disk > [ 4.308087] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 4.316438] ata7.00: ATA-7: WDC WD800JD-55MUA1, 10.01E01, max UDMA/133 > [ 4.316939] ata7.00: 156301488 sectors, multi 16: LBA48 NCQ (depth > 0/32) > [ 4.324426] ata7.00: configured for UDMA/133 > [ 4.325072] scsi 6:0:0:0: Direct-Access ATA WDC WD800JD-55MU > 10.0 PQ: 0 ANSI: 5 > [ 4.326791] sd 6:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 > GB/74.5 GiB) > [ 4.327885] sd 6:0:0:0: [sdb] Write Protect is off > [ 4.328358] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 4.328957] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 4.330226] sdb: sdb1 > [ 4.339084] sd 6:0:0:0: [sdb] Attached SCSI disk > [ 4.644065] ata8: SATA link down (SStatus 0 SControl 300) > [ 5.552048] floppy0: no floppy controllers found > [ 5.602342] device-mapper: uevent: version 1.0.3 > [ 5.604238] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) > initialised: dm-devel@xxxxxxxxxx > udevd-work[79]: kernel-provided name 'dm-0' and NAME= > 'mapper/vg0-boole--root' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[79]: kernel-provided name 'dm-1' and NAME= > 'mapper/vg0-boole--swap' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > [ 5.929616] PM: Starting manual resume from disk > [ 5.930123] PM: Resume from partition 254:1 > [ 5.930648] PM: Checking hibernation image. > [ 5.931436] PM: Error -22 checking image file > [ 5.931935] PM: Resume from disk failed. > [ 6.017481] kjournald starting. Commit interval 5 seconds > [ 6.018026] EXT3-fs: mounted filesystem with ordered data mode. > INIT: version 2.88 booting > Using makefile-style concurrent boot in runlevel S. > Starting the hotplug events dispatcher: udevd[ 7.642726] udev: > starting version 154 > . > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...[ 8.310862] input: Power > Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 > [ 8.311895] ACPI: Power Button [PWRB] > [ 8.328198] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > [ 8.329207] ACPI: Power Button [PWRF] > [ 8.415220] processor LNXCPU:00: registered as cooling_device0 > [ 8.483916] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 8.615432] shpchp: Standard Hot Plug PCI Controller Driver version: > 0.4 > [ 9.126294] input: PC Speaker as /devices/platform/pcspkr/input/input4 > [ 9.142026] EDAC MC: Ver: 2.1.0 Jun 1 2010 > [ 9.202855] parport_pc 00:07: reported by Plug and Play ACPI > [ 9.203480] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > [ 9.263445] EDAC amd64_edac: Ver: 3.2.0 Jun 1 2010 > [ 9.264173] EDAC amd64: ECC is enabled by BIOS. > [ 9.264729] EDAC MC: Rev E or earlier detected > [ 9.265375] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV > 0000:00:18.2 > [ 9.266403] EDAC PCI0: Giving out device to module 'amd64_edac' > controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) > [ 9.620988] Error: Driver 'pcspkr' is already registered, aborting... > [ 12.152049] floppy0: no floppy controllers found > done. > Setting parameters of disc: (none). > Invalidating stale software suspend images... done. > %@Checking root file system...fsck from util-linux-ng 2.16.2 > /dev/mapper/vg0-boole--root: clean, 80774/415344 files, 612601/1653760 > blocks > done. > [ 12.907049] EXT3 FS on dm-0, internal journal > Cleaning up ifupdown.... > [ 13.168353] loop: module loaded > Loading kernel modules...done. > Setting up networking.... > Setting up LVM Volume Groups Reading all physical volumes. This may > take a while... > Found volume group "vg0" using metadata type lvm2 > Found volume group "vg1" using metadata type lvm2 > 6 logical volume(s) in volume group "vg0" now active > udevd-work[379]: kernel-provided name 'dm-4' and NAME= > 'mapper/vg0-hahn--swap' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-2' and NAME= > 'mapper/vg0-boole--data--local' disagree, please use SYMLINK+= or change the > kernel to provide the proper name > > udevd-work[378]: kernel-provided name 'dm-3' and NAME= > 'mapper/vg0-hahn--root' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[382]: kernel-provided name 'dm-6' and NAME= > 'mapper/vg1-stokes--swap' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[380]: kernel-provided name 'dm-5' and NAME= > 'mapper/vg0-hahn--data--local' disagree, please use SYMLINK+= or change the > kernel to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-7' and NAME= > 'mapper/vg1-stokes--root' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[378]: kernel-provided name 'dm-8' and NAME= > 'mapper/vg1-stokes--data' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[379]: kernel-provided name 'dm-9' and NAME= > 'mapper/vg1-kepler--swap' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-10' and NAME= > 'mapper/vg1-kepler--data' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[378]: kernel-provided name 'dm-11' and NAME= > 'mapper/vg1-kepler--root' disagree, please use SYMLINK+= or change the kernel > to provide the proper name > > udevd-work[379]: kernel-provided name 'dm-12' and NAME= > 'mapper/vg1-poisson--swap' disagree, please use SYMLINK+= or change the > kernel to provide the proper name > > udevd-work[380]: kernel-provided name 'dm-13' and NAME= > 'mapper/vg1-poisson--root' disagree, please use SYMLINK+= or change the > kernel to provide the proper name > > udevd-work[376]: kernel-provided name 'dm-14' and NAME= > 'mapper/vg1-hamilton--swap' disagree, please use SYMLINK+= or change the > kernel to provide the proper name > > 11 logical volume(s) in volume group "vg1" now active > udevd-work[378]: kernel-provided name 'dm-15' and NAME= > 'mapper/vg1-hamilton--root' disagree, please use SYMLINK+= or change the > kernel to provide the proper name > > . > Activating lvm and md swap...udevd-work[376]: kernel-provided name > 'dm-16' and NAME= 'mapper/vg1-abel--swap' disagree, please use SYMLINK+= or > change the kernel to provide the proper name > > [ 14.520553] Adding 974840k swap on /dev/mapper/vg0-boole--swap. > Priority:-1 extents:1 across:974840k > done. > Checking file systems...fsck from util-linux-ng 2.16.2 > /dev/mapper/vg0-boole--data--local: clean, 300462/1617472 files, > 4073213/6516736 blocks > done. > Mounting local filesystems...udevd-work[376]: kernel-provided name 'dm-2' > and NAME= 'mapper/vg0-boole--data--local' disagree, please use SYMLINK+= or > change the kernel to provide the proper name > > [ 14.692746] kjournald starting. Commit interval 5 seconds > [ 14.693514] EXT3 FS on dm-2, internal journal > [ 14.694018] EXT3-fs: mounted filesystem with ordered data mode. > done. > Activating swapfile swap...done. > Cleaning up temporary files.... > Configuring network interfaces...[ 15.334232] Bridge firewalling > registered > [ 15.397696] device eth0 entered promiscuous mode > [ 15.401931] r8169: eth0: link up > [ 15.406393] device eth1 entered promiscuous mode > [ 15.425604] e100 0000:00:0c.0: firmware: requesting > e100/d101m_ucode.bin > [ 15.480924] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 15.484299] e100: eth1 NIC Link is Up 100 Mbps Full Duplex > [ 15.485780] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready > [ 15.491182] br0: port 2(eth1) entering learning state > [ 15.491688] br0: port 1(eth0) entering learning state > > Waiting for br0 to get ready (MAXWAIT is 32 seconds). > Setting kernel variables ...done. > [ 25.700012] eth0: no IPv6 routers present > [ 25.820008] eth1: no IPv6 routers present > [ 25.892009] br0: no IPv6 routers present > [ 30.488018] br0: port 2(eth1) entering forwarding state > [ 30.488552] br0: port 1(eth0) entering forwarding state > Internet Systems Consortium DHCP Client V3.1.3 > Copyright 2004-2009 Internet Systems Consortium. > All rights reserved. > For info, please visit https://www.isc.org/software/dhcp/ > > Listening on LPF/br0/00:02:b3:29:31:eb > Sending on LPF/br0/00:02:b3:29:31:eb > Sending on Socket/fallback > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 5 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 7 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 7 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 12 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 10 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 18 > DHCPDISCOVER on br0 to 255.255.255.255 port 67 interval 2 > No DHCPOFFERS received. > No working leases in persistent database - sleeping. > done. > Cleaning up temporary files.... > Setting console screen modes and fonts. > cannot (un)set powersave mode > [9;30][14;30][ 93.937149] fuse init (API version 7.13) > Setting sensors limits. > INIT: Entering runlevel: 2 > Using makefile-style concurrent boot in runlevel 2. > udevd-work[481]: kernel-provided name 'evtchn' and NAME= 'xen/evtchn' > disagree, please use SYMLINK+= or change the kernel to provide the proper name > > [ 94.359169] Event-channel device installed. > Starting enhanced syslogd: rsyslogd. > [ 95.122279] alloc irq_desc for 500 on node 0 > [ 95.122816] alloc kstat_irqs on node 0 > [ 95.123433] alloc irq_desc for 499 on node 0 > [ 95.123932] alloc kstat_irqs on node 0 > [ 95.126221] XENBUS: Unable to read cpu state > Starting ACPI services.... > Starting anac(h)ronistic cron: anacron. > Starting deferred execution scheduler: atd. > Starting periodic command scheduler: cron. > Starting system message bus: dbus. > Starting kerneloops: > Starting mail-transfer-agent: nullmailer. > Starting Xen daemons: xenfs xenstored xenconsoled xend. > Starting auto Xen domains: hamilton[ 104.719747] alloc irq_desc for > 498 on node 0 > [ 104.720022] alloc kstat_irqs on node 0 > [ 105.453372] alloc irq_desc for 497 on node 0 > [ 105.453909] alloc kstat_irqs on node 0 > [ 105.535899] device vif1.0 entered promiscuous mode > [ 105.555070] br0: port 3(vif1.0) entering learning state > [ 107.190073] blkback: ring-ref 8, event-channel 8, protocol 2 > (x86_32-abi) > [ 107.190644] alloc irq_desc for 496 on node 0 > [ 107.191141] alloc kstat_irqs on node 0 > [ 107.210062] blkback: ring-ref 9, event-channel 9, protocol 2 > (x86_32-abi) > [ 107.210607] alloc irq_desc for 495 on node 0 > [ 107.211104] alloc kstat_irqs on node 0 > [ 107.250723] alloc irq_desc for 494 on node 0 > [ 107.251226] alloc kstat_irqs on node 0 > poisson[ 113.363323] alloc irq_desc for 493 on node 0 > [ 113.363860] alloc kstat_irqs on node 0 > [ 114.256144] device vif2.0 entered promiscuous mode > [ 114.273273] br0: port 4(vif2.0) entering learning state > [ 114.401420] alloc irq_desc for 492 on node 0 > [ 114.401956] alloc kstat_irqs on node 0 > [ 115.093754] blkback: ring-ref 8, event-channel 8, protocol 2 > (x86_32-abi) > [ 115.094334] alloc irq_desc for 491 on node 0 > [ 115.094832] alloc kstat_irqs on node 0 > [ 115.112689] blkback: ring-ref 9, event-channel 9, protocol 2 > (x86_32-abi) > [ 115.113236] alloc irq_desc for 490 on node 0 > [ 115.113733] alloc kstat_irqs on node 0 > [ 115.158579] alloc irq_desc for 489 on node 0 > [ 115.159081] alloc kstat_irqs on node 0 > [ 116.184011] vif1.0: no IPv6 routers present > stokes[ 120.552156] br0: port 3(vif1.0) entering forwarding state > [ 121.222354] alloc irq_desc for 488 on node 0 > [ 121.222890] alloc kstat_irqs on node 0 > [ 122.663290] device vif3.0 entered promiscuous mode > [ 122.935537] br0: port 5(vif3.0) entering learning state > [ 123.101861] alloc irq_desc for 487 on node 0 > [ 123.102398] alloc kstat_irqs on node 0 > [ 124.115613] blkback: ring-ref 8, event-channel 8, protocol 2 > (x86_32-abi) > [ 124.116222] alloc irq_desc for 486 on node 0 > [ 124.116720] alloc kstat_irqs on node 0 > [ 124.135739] blkback: ring-ref 9, event-channel 9, protocol 2 > (x86_32-abi) > [ 124.136320] alloc irq_desc for 485 on node 0 > [ 124.136846] alloc kstat_irqs on node 0 > [ 124.153937] blkback: ring-ref 10, event-channel 10, protocol 2 > (x86_32-abi) > [ 124.154485] alloc irq_desc for 484 on node 0 > [ 124.154982] alloc kstat_irqs on node 0 > [ 124.270923] alloc irq_desc for 483 on node 0 > [ 124.271462] alloc kstat_irqs on node 0 > [ 124.386590] vif2.0: no IPv6 routers present > [done]. > [ 129.272012] br0: port 4(vif2.0) entering forwarding state > [ 133.636010] vif3.0: no IPv6 routers present > [ 137.932012] br0: port 5(vif3.0) entering forwarding state > > Here I start the domU that is supposed to use the PCI device: > > [ 169.841776] alloc irq_desc for 482 on node 0 > [ 169.842312] alloc kstat_irqs on node 0 > [ 171.345662] device vif4.0 entered promiscuous mode > [ 171.358478] br0: port 6(vif4.0) entering learning state > [ 171.666476] pciback: vpci: 0000:00:02.7: assign to virtual slot 0 > [ 171.795253] alloc irq_desc for 481 on node 0 > [ 171.795791] alloc kstat_irqs on node 0 > [ 173.956696] alloc irq_desc for 480 on node 0 > [ 173.957231] alloc kstat_irqs on node 0 > [ 174.310130] alloc irq_desc for 479 on node 0 > [ 174.310666] alloc kstat_irqs on node 0 > [ 174.329246] blkback: ring-ref 770, event-channel 10, protocol 2 > (x86_32-abi) > [ 174.329798] alloc irq_desc for 478 on node 0 > [ 174.330296] alloc kstat_irqs on node 0 > [ 174.382985] blkback: ring-ref 771, event-channel 11, protocol 2 > (x86_32-abi) > [ 174.384144] alloc irq_desc for 477 on node 0 > [ 174.384662] alloc kstat_irqs on node 0 > [ 174.408827] blkback: ring-ref 772, event-channel 12, protocol 2 > (x86_32-abi) > [ 174.409379] alloc irq_desc for 476 on node 0 > [ 174.409876] alloc kstat_irqs on node 0 > [ 181.812029] vif4.0: no IPv6 routers present > [ 186.356264] br0: port 6(vif4.0) entering forwarding state > > Apparently the pciback does something. > > Boot log for the domU: > > [ 0.000000] Reserving virtual address space above 0xf5800000 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-15) > (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 > 08:48:09 UTC 2010 > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] NSC Geode by NSC > [ 0.000000] Cyrix CyrixInstead > [ 0.000000] Centaur CentaurHauls > [ 0.000000] Transmeta GenuineTMx86 > [ 0.000000] Transmeta TransmetaCPU > [ 0.000000] UMC UMC UMC UMC > [ 0.000000] ACPI in unprivileged domain disabled > [ 0.000000] released 0 pages of unused memory > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > [ 0.000000] Xen: 0000000000100000 - 000000001c800000 (usable) > [ 0.000000] DMI not present or invalid. > [ 0.000000] last_pfn = 0x1c800 max_arch_pfn = 0x1000000 > [ 0.000000] initial memory mapped : 0 - 033ff000 > [ 0.000000] init_memory_mapping: 0000000000000000-000000001c800000 > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] 0000000000 - 001c800000 page 4k > [ 0.000000] kernel direct mapping tables up to 1c800000 @ 100000-1e9000 > [ 0.000000] RAMDISK: 01655000 - 02980000 > [ 0.000000] 0MB HIGHMEM available. > [ 0.000000] 456MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 1c800000 > [ 0.000000] low ram: 0 - 1c800000 > [ 0.000000] node 0 low ram: 00000000 - 1c800000 > [ 0.000000] node 0 bootmap 00002000 - 00005900 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - > 001c800000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [00029f5000 - 0002a0d000] XEN PAGETABLES ==> > [00029f5000 - 0002a0d000] > [ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #4 [0001000000 - 000152fb34] TEXT DATA BSS ==> > [0001000000 - 000152fb34] > [ 0.000000] #5 [0001655000 - 0002980000] RAMDISK ==> > [0001655000 - 0002980000] > [ 0.000000] #6 [0002980000 - 00029f5000] XEN START INFO ==> > [0002980000 - 00029f5000] > [ 0.000000] #7 [0000100000 - 00001cd000] PGTABLE ==> > [0000100000 - 00001cd000] > [ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> > [0000002000 - 0000006000] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x0001c800 > [ 0.000000] HighMem 0x0001c800 -> 0x0001c800 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[2] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x000000a0 > [ 0.000000] 0: 0x00000100 -> 0x0001c800 > [ 0.000000] On node 0 totalpages: 116640 > [ 0.000000] free_area_init_node: node 0, pgdat c13eea80, node_mem_map > c2a0d000 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3968 pages, LIFO batch:0 > [ 0.000000] Normal zone: 880 pages used for memmap > [ 0.000000] Normal zone: 111760 pages, LIFO batch:31 > [ 0.000000] Using APIC driver default > [ 0.000000] SFI: Simple Firmware Interface v0.7 > http://simplefirmware.org > [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > [ 0.000000] Local APIC disabled by BIOS -- you can enable it with > "lapic" > [ 0.000000] APIC: disable apic facility > [ 0.000000] nr_irqs_gsi: 16 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 1c800000 (gap: > 1c800000:e3800000) > [ 0.000000] Booting paravirtualized kernel on Xen > [ 0.000000] Xen version: 4.0.0 (preserve-AD) > [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 15 pages/cpu @c2da1000 s37496 r0 d23944 > u65536 > [ 0.000000] pcpu-alloc: s37496 r0 d23944 u65536 alloc=16*4096 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] trying to map vcpu_info 0 at c2da2010, mfn 29041, offset 16 > [ 0.000000] cpu 0 using vcpu_info at c2da2010 > [ 0.000000] Xen: using vcpu_info placement > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 115728 > [ 0.000000] Kernel command line: root=/dev/xvda ro iommu=soft > swiotlb=force > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] DMA: Placing 64MB software IO TLB between c2e13000 - > c6e13000 > [ 0.000000] DMA: software IO TLB at phys 0x2e13000 - 0x6e13000 > [ 0.000000] xen_swiotlb_fixup: buf=c2e13000 size=67108864 > [ 0.000000] xen_swiotlb_fixup: buf=c6e73000 size=32768 > [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) > [ 0.000000] Memory: 369840k/466944k available (2619k kernel code, > 96424k reserved, 1446k data, 400k init, 0k highmem) > [ 0.000000] virtual kernel memory layout: > [ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB) > [ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB) > [ 0.000000] vmalloc : 0xdd000000 - 0xf4ffe000 ( 383 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xdc800000 ( 456 MB) > [ 0.000000] .init : 0xc13f9000 - 0xc145d000 ( 400 kB) > [ 0.000000] .data : 0xc128ee8d - 0xc13f8790 (1446 kB) > [ 0.000000] .text : 0xc1000000 - 0xc128ee8d (2619 kB) > [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, > CPUs=1, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS:1536 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] console [hvc0] enabled > [ 0.000000] Xen: using vcpuop timer interface > [ 0.000000] installing Xen timer for CPU 0 > [ 0.000000] Detected 1800.063 MHz processor. > [ 0.004000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3600.12 BogoMIPS (lpj=7200252) > [ 0.004000] Security Framework initialized > [ 0.004000] SELinux: Disabled at boot. > [ 0.004000] Mount-cache hash table entries: 512 > [ 0.004000] Initializing cgroup subsys ns > [ 0.004000] Initializing cgroup subsys cpuacct > [ 0.004000] Initializing cgroup subsys devices > [ 0.004000] Initializing cgroup subsys freezer > [ 0.004000] Initializing cgroup subsys net_cls > [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 > bytes/line) > [ 0.004000] CPU: L2 Cache: 128K (64 bytes/line) > [ 0.004000] Performance Events: AMD PMU driver. > [ 0.004000] ... version: 0 > [ 0.004000] ... bit width: 48 > [ 0.004000] ... generic registers: 4 > [ 0.004000] ... value mask: 0000ffffffffffff > [ 0.004000] ... max period: 00007fffffffffff > [ 0.004000] ... fixed-purpose events: 0 > [ 0.004000] ... event mask: 000000000000000f > [ 0.004000] SMP alternatives: switching to UP code > [ 0.012688] Freeing SMP alternatives: 14k freed > [ 0.013059] Brought up 1 CPUs > [ 0.013084] CPU0 attaching NULL sched-domain. > [ 0.013277] devtmpfs: initialized > [ 0.014044] Grant table initialized > [ 0.014058] regulator: core version 0.5 > [ 0.014148] NET: Registered protocol family 16 > [ 0.016725] PCI: setting up Xen PCI frontend stub > [ 0.017626] bio: create slab <bio-0> at 0 > [ 0.017736] ACPI: Interpreter disabled. > [ 0.024075] xen_balloon: Initialising balloon driver with page order 0. > [ 0.024145] vgaarb: loaded > [ 0.024275] PCI: System does not support PCI > [ 0.028001] PCI: System does not support PCI > [ 0.028099] Switching to clocksource xen > [ 0.030486] pnp: PnP ACPI: disabled > [ 0.030528] PnPBIOS: Disabled > [ 0.030955] NET: Registered protocol family 2 > [ 0.031966] IP route cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 0.032787] TCP established hash table entries: 16384 (order: 5, > 131072 bytes) > [ 0.032928] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) > [ 0.033035] TCP: Hash tables configured (established 16384 bind 16384) > [ 0.033047] TCP reno registered > [ 0.033185] NET: Registered protocol family 1 > [ 0.033279] Unpacking initramfs... > [ 0.077224] Freeing initrd memory: 19628k freed > [ 0.091372] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.091397] DMA: Placing 64MB software IO TLB between c2e13000 - > c6e13000 > [ 0.091408] DMA: software IO TLB at phys 0x2e13000 - 0x6e13000 > [ 0.091516] platform rtc_cmos: registered platform RTC device (no PNP > device found) > [ 0.091780] audit: initializing netlink socket (disabled) > [ 0.091804] type=2000 audit(1275685176.668:1): initialized > [ 0.092860] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.095217] VFS: Disk quotas dquot_6.5.2 > [ 0.095316] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.095445] msgmni has been set to 761 > [ 0.095771] alg: No test for stdrng (krng) > [ 0.095878] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 0.095890] io scheduler noop registered > [ 0.095898] io scheduler anticipatory registered > [ 0.095906] io scheduler deadline registered > [ 0.096083] io scheduler cfq registered (default) > [ 0.112222] pcifront pci-0: Installing PCI frontend > [ 0.112335] pcifront pci-0: Creating PCI Frontend Bus 0000:00 > [ 0.116512] isapnp: ISA Plug & Play support disabled > [ 0.123844] registering netback > [ 0.126404] Linux agpgart interface v0.103 > [ 0.126563] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.126966] PNP: No PS/2 controller found. Probing ports directly. > [ 0.127795] i8042.c: No controller found. > [ 0.127869] mice: PS/2 mouse device common for all mice > [ 0.128147] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 0.128245] cpuidle: using governor ladder > [ 0.128253] cpuidle: using governor menu > [ 0.128264] No iBFT detected. > [ 0.128701] TCP cubic registered > [ 0.228093] NET: Registered protocol family 10 > [ 0.228699] lo: Disabled Privacy Extensions > [ 0.229113] Mobile IPv6 > [ 0.229136] NET: Registered protocol family 17 > [ 0.229193] Using IPI No-Shortcut mode > [ 0.229353] PM: Resume from disk failed. > [ 0.229365] registered taskstats version 1 > [ 0.229426] XENBUS: Device with no driver: device/vbd/51712 > [ 0.229455] XENBUS: Device with no driver: device/vbd/51728 > [ 0.229480] XENBUS: Device with no driver: device/vbd/51744 > [ 0.229488] XENBUS: Device with no driver: device/vif/0 > [ 0.229497] XENBUS: Device with no driver: device/console/0 > [ 0.229529] > /build/buildd-linux-2.6_2.6.32-15-i386-fb7Hfg/linux-2.6-2.6.32/debian/build/source_i386_xen/drivers/rtc/hctosys.c: > unable to open rtc device (rtc0) > [ 0.229571] Initalizing network drop monitor service > [ 0.229645] Freeing unused kernel memory: 400k freed > [ 0.233197] Write protecting the kernel text: 2620k > [ 0.233595] Write protecting the kernel read-only data: 964k > [ 0.287600] udev: starting version 154 > [ 0.404841] Initialising Xen virtual ethernet driver. > [ 0.527189] blkfront: xvda: barriers enabled > [ 0.530347] xvda: unknown partition table > [ 0.604426] blkfront: xvdc: barriers enabled > [ 0.607760] xvdc: unknown partition table > [ 0.629003] blkfront: xvdb: barriers enabled > [ 0.632120] xvdb: unknown partition table > [ 0.685270] Setting capacity to 579076096 > [ 0.685294] xvdc: detected capacity change from 0 to 296486961152 > [ 0.840610] PM: Starting manual resume from disk > [ 0.840629] PM: Resume from partition 202:16 > [ 0.840633] PM: Checking hibernation image. > [ 0.841455] PM: Error -22 checking image file > [ 0.841460] PM: Resume from disk failed. > [ 0.901114] kjournald starting. Commit interval 5 seconds > [ 0.901148] EXT3-fs: mounted filesystem with ordered data mode. > [ 2.311864] udev: starting version 154 > [ 3.063457] input: PC Speaker as /devices/platform/pcspkr/input/input0 > [ 3.113060] Error: Driver 'pcspkr' is already registered, aborting... > [ 3.399478] Adding 655352k swap on /dev/xvdb. Priority:-1 extents:1 > across:655352k SS > [ 3.583101] EXT3 FS on xvda, internal journal > [ 977.287888] kjournald starting. Commit interval 5 seconds > [ 977.295032] EXT3 FS on xvdc, internal journal > [ 977.295054] EXT3-fs: mounted filesystem with ordered data mode. > [ 979.065859] RPC: Registered udp transport module. > [ 979.065877] RPC: Registered tcp transport module. > [ 979.065885] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 979.169060] Slow work thread pool: Starting up > [ 979.169160] Slow work thread pool: Ready > [ 979.169252] FS-Cache: Loaded > [ 979.264207] FS-Cache: Netfs 'nfs' registered for caching > [ 979.320718] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > [ 979.816552] fuse init (API version 7.13) > [ 980.445821] svc: failed to register lockdv1 RPC service (errno 97). > [ 980.448618] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state > recovery directory > [ 980.490135] NFSD: starting 90-second grace period > [ 989.240036] eth0: no IPv6 routers present > > But lspci doesn't show anything and /sys/bus/pci/devices/ is empty. > > > Regards, > Thomas _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |