[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] dom0 Kernel panic after enable CONFIG_X86_BIGSMP and change CONFIG_NR_CPUS=16 on 2.6.32 or 2.6.33


  • To: Xen Mailing List <xen-users@xxxxxxxxxxxxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
  • From: lei yang <yanglei.fage@xxxxxxxxx>
  • Date: Mon, 31 May 2010 10:46:45 +0800
  • Cc:
  • Delivery-date: Sun, 30 May 2010 20:19:39 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=s0+ykWltRU6uliMxO2uDjqmyFP2DI3by/n27SBCw+aiALYFiKNN8JQ39JTxWYj14rt /jfqxqWoFRR2C0tLR2IEJ5jjdl9JfFjhF04PQxfAcaCksrMleU567YEbakCDFdyRjFzo CcOT8MmKd5zon+59FUmpuoHSz2SSL7v5sPErw=
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>

Hi experts

I have a nehalem board with 8 phy cors and support ht

This is the boot log

[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] xen_release_chunk: looking at area pfn 90000-a0000: 65536 pages freed
[    0.000000] xen_release_chunk: looking at area pfn b0000-fc000: 311296 pages freed
[    0.000000] xen_release_chunk: looking at area pfn fd000-fec00: 7168 pages freed
[    0.000000] xen_release_chunk: looking at area pfn fec01-fec90: 143 pages freed
[    0.000000] xen_release_chunk: looking at area pfn fec91-fed1c: 139 pages freed
[    0.000000] xen_release_chunk: looking at area pfn fed20-fee00: 224 pages freed
[    0.000000] xen_release_chunk: looking at area pfn fee01-ff800: 2559 pages freed
[    0.000000] released 387065 pages of unused memory
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009c000 (usable)
[    0.000000]  Xen: 000000000009c000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 000000008c42d000 (usable)
[    0.000000]  Xen: 000000008c42d000 - 000000008d82d000 (ACPI NVS)
[    0.000000]  Xen: 000000008d82d000 - 000000008f602000 (ACPI data)
[    0.000000]  Xen: 000000008f602000 - 000000008f64f000 (reserved)
[    0.000000]  Xen: 000000008f64f000 - 000000008f66d000 (ACPI data)
[    0.000000]  Xen: 000000008f66d000 - 000000008f7cf000 (ACPI NVS)
[    0.000000]  Xen: 000000008f7cf000 - 000000008f800000 (ACPI data)
[    0.000000]  Xen: 000000008f800000 - 0000000090000000 (reserved)
[    0.000000]  Xen: 00000000a0000000 - 00000000b0000000 (reserved)
[    0.000000]  Xen: 00000000fc000000 - 00000000fd000000 (reserved)
[    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  Xen: 00000000fec90000 - 00000000fec91000 (reserved)
[    0.000000]  Xen: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000]  Xen: 0000000100000000 - 000000037acf2000 (usable)
[    0.000000]  Xen: 0000000400000000 - 0000000670000000 (unusable)
[    0.000000] DMI 2.5 present.
[    0.000000] last_pfn = 0x37acf2 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009c000 (usable)
[    0.000000]  modified: 000000000009c000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000008c42d000 (usable)
[    0.000000]  modified: 000000008c42d000 - 000000008d82d000 (ACPI NVS)
[    0.000000]  modified: 000000008d82d000 - 000000008f602000 (ACPI data)
[    0.000000]  modified: 000000008f602000 - 000000008f64f000 (reserved)
[    0.000000]  modified: 000000008f64f000 - 000000008f66d000 (ACPI data)
[    0.000000]  modified: 000000008f66d000 - 000000008f7cf000 (ACPI NVS)
[    0.000000]  modified: 000000008f7cf000 - 000000008f800000 (ACPI data)
[    0.000000]  modified: 000000008f800000 - 0000000090000000 (reserved)
[    0.000000]  modified: 00000000a0000000 - 00000000b0000000 (reserved)
[    0.000000]  modified: 00000000fc000000 - 00000000fd000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fec90000 - 00000000fec91000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 000000037acf2000 (usable)
[    0.000000]  modified: 0000000400000000 - 0000000670000000 (unusable)
[    0.000000] init_memory_mapping: 0000000000000000-000000002d1fe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] ACPI: RSDP 000f03f0 00024 (v02 INTEL )
[    0.000000] ACPI: XSDT 8f7fe120 0009C (v01 INTEL  S5520HC  00000000      01000013)
[    0.000000] ACPI: FACP 8f7fc000 000F4 (v04 INTEL  S5520HC  00000000 MSFT 0100000D)
[    0.000000] ACPI: DSDT 8f7f5000 06404 (v02 INTEL  S5520HC  00000003 MSFT 0100000D)
[    0.000000] ACPI: FACS 8f735000 00040
[    0.000000] ACPI: APIC 8f7f4000 00138 (v02 INTEL  S5520HC  00000000 MSFT 0100000D)
[    0.000000] ACPI: MCFG 8f7f3000 0003C (v01 INTEL  S5520HC  00000001 MSFT 0100000D)
[    0.000000] ACPI: HPET 8f7f2000 00038 (v01 INTEL  S5520HC  00000001 MSFT 0100000D)
[    0.000000] ACPI: SLIT 8f7f1000 00030 (v01 INTEL  S5520HC  00000001 MSFT 0100000D)
[    0.000000] ACPI: SRAT 8f7f0000 003B0 (v02 INTEL  S5520HC  00000001 MSFT 0100000D)
[    0.000000] ACPI: SPCR 8f7ef000 00050 (v01 INTEL  S5520HC  00000000 MSFT 0100000D)
[    0.000000] ACPI: WDDT 8f7ee000 00040 (v01 INTEL  S5520HC  00000000 MSFT 0100000D)
[    0.000000] ACPI: SSDT 8f7dc000 11FE4 (v02  INTEL SSDT  PM 00004000 INTL 20061109)
[    0.000000] ACPI: SSDT 8f7db000 001D8 (v02  INTEL IPMI     00004000 INTL 20061109)
[    0.000000] ACPI: HEST 8f7d9000 000A8 (v01 INTEL  S5520HC  00000001 INTL 00000001)
[    0.000000] ACPI: BERT 8f7d8000 00030 (v01 INTEL  S5520HC  00000001 INTL 00000001)
[    0.000000] ACPI: ERST 8f7d7000 00230 (v01 INTEL  S5520HC  00000001 INTL 00000001)
[    0.000000] ACPI: EINJ 8f7d6000 00130 (v01 INTEL  S5520HC  00000001 INTL 00000001)
[    0.000000] ACPI:      8f7d5000 001D0 (v01 INTEL  S5520HC  00000001 MSFT 0100000D)
[    0.000000] Node: 0, start_pfn: 0, end_pfn: 37acf2
[    0.000000] Reserving total of 7000 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 26000 max_low_pfn ~ 2d1fe
[    0.000000] max_pfn = 37acf2
[    0.000000] 13530MB HIGHMEM available.
[    0.000000] 721MB LOWMEM available.
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da23 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da24 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da25 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da26 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da27 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da28 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da29 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da2a ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da2b ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da2c ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da2d ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da2e ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da2f ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da30 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da31 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da32 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da33 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da34 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da35 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da36 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da37 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da38 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da39 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da3a ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da3b ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da3c ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da3d ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da3e ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da3f ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da40 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da41 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da42 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da43 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da44 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da45 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da46 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da47 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da48 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da49 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da4a ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da4b ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da4c ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da4d ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da4e ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da4f ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da50 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da51 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da52 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da53 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da54 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da55 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da56 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da57 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da58 ]---
[    0.000000] 1 multicall(s) failed: cpu 0
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c1004744>] xen_mc_flush+0x135/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x20d/0x215()
[    0.000000] Hardware name: S5520HC
[    0.000000] Modules linked in:
[    0.000000] Pid: 0, comm: swapper Tainted: G        W  2.6.32.13 #2
[    0.000000] Call Trace:
[    0.000000]  [<c103d895>] warn_slowpath_common+0x60/0x90
[    0.000000]  [<c103d8d2>] warn_slowpath_null+0xd/0x10
[    0.000000]  [<c100481c>] xen_mc_flush+0x20d/0x215
[    0.000000]  [<c100529d>] xen_mc_issue+0x14/0x42
[    0.000000]  [<c100651a>] xen_set_pmd_hyper+0xa2/0xaa
[    0.000000]  [<c102a763>] set_pmd_pfn+0xe3/0x100
[    0.000000]  [<c14b7acc>] ? printk+0xf/0x11
[    0.000000]  [<c17942c6>] initmem_init+0x4eb/0x630
[    0.000000]  [<c17a2a63>] ? acpi_table_parse_madt+0x16/0x18
[    0.000000]  [<c178aaa9>] ? acpi_parse_lapic_addr_ovr+0x0/0x32
[    0.000000]  [<c1785c6c>] setup_arch+0x82b/0xa42
[    0.000000]  [<c103de38>] ? release_console_sem+0x19e/0x1cb
[    0.000000]  [<c103e32b>] ? vprintk+0x2fd/0x320
[    0.000000]  [<c1780020>] ? i386_start_kernel+0xf/0x96
[    0.000000]  [<c1006c46>] ? __raw_callee_save_xen_restore_fl+0x6/0x8
[    0.000000]  [<c17805d9>] start_kernel+0x86/0x360
[    0.000000]  [<c17800a2>] i386_start_kernel+0x91/0x96
[    0.000000]  [<c1783642>] xen_start_kernel+0x625/0x62d
[    0.000000] ---[ end trace 4eaa2a86a8e2da59 ]---
[    0.000000]   mapped low ram: 0 - 2d1fe000
[    0.000000]   low ram: 0 - 2d1fe000
[    0.000000]   node 0 low ram: 00000000 - 2d1fe000
[    0.000000]   node 0 bootmap 00007000 - 0000ca40
[    0.000000] (11 early reservations) ==> bootmem [0000000000 - 002d1fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [00027d8000 - 00027f3000]   XEN PAGETABLES ==> [00027d8000 - 00027f3000]
[    0.000000]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #4 [0001000000 - 00018c52c0]    TEXT DATA BSS ==> [0001000000 - 00018c52c0]
[    0.000000]   #5 [00019eb000 - 00027d8000]   XEN START INFO ==> [00019eb000 - 00027d8000]
[    0.000000]   #6 [00018c6000 - 00018c6288]              BRK ==> [00018c6000 - 00018c6288]
[    0.000000]   #7 [0000100000 - 0000250000]          PGTABLE ==> [0000100000 - 0000250000]
[    0.000000]   #8 [0373c00000 - 037ac00000]          KVA RAM
[    0.000000]   #9 [0026000000 - 002d000000]           KVA PG ==> [0026000000 - 002d000000]
[    0.000000]   #10 [0000007000 - 000000d000]          BOOTMAP ==> [0000007000 - 000000d000]
[    0.000000] found SMP MP-table at [c00fd740] fd740
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002d1fe
[    0.000000]   HighMem  0x0002d1fe -> 0x0037acf2
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x0008c42d
[    0.000000]     0: 0x00100000 -> 0x00373c00
[    0.000000]     0: 0x0037ac00 -> 0x0037acf2
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI 24-24
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.0.0 (preserve-AD) (dom0)
[    0.000000] NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:8
[    0.000000] PERCPU: Embedded 15 pages/cpu @c18db000 s37464 r0 d23976 u65536
[    0.000000] pcpu-alloc: s37464 r0 d23976 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
[    0.778468] Xen: using vcpu_info placement
[    0.778472] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3117405
[    0.778475] Policy zone: HighMem
[    0.778479] Kernel command line: root=/dev/sda1 console=ttyS0,115200
[    0.778498] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.778576] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.778772] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.778997] Enabling fast FPU save and restore... done.
[    0.779002] Enabling unmasked SIMD FPU exception support... done.
[    0.779008] Initializing CPU#0
[    0.788153] DMA: Placing 64MB software IO TLB between c28b3000 - c68b3000
[    0.788158] DMA: software IO TLB at phys 0x28b3000 - 0x68b3000
[    0.788162] xen_swiotlb_fixup: buf=c28b3000 size=67108864
[    0.808711] xen_swiotlb_fixup: buf=c6913000 size=32768
[    0.818312] Initializing HighMem for node 0 (0002d1fe:0037acf2)
[    1.872584] Memory: 12376428k/14595016k available (4853k kernel code, 207212k reserved, 2822k data, 464k init, 11844740k highmem)
[    1.872591] virtual kernel memory layout:
[    1.872592]     fixmap  : 0xf5685000 - 0xf57ff000   (1512 kB)
[    1.872593]     pkmap   : 0xf5200000 - 0xf5400000   (2048 kB)
[    1.872595]     vmalloc : 0xed9fe000 - 0xf51fe000   ( 120 MB)
[    1.872596]     lowmem  : 0xc0000000 - 0xed1fe000   ( 721 MB)
[    1.872597]       .init : 0xc1780000 - 0xc17f4000   ( 464 kB)
[    1.872598]       .data : 0xc14bd6ec - 0xc177f294   (2822 kB)
[    1.872599]       .text : 0xc1000000 - 0xc14bd6ec   (4853 kB)
[    1.872658] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=8
[    1.872705] Hierarchical RCU implementation.
[    1.872723] NR_IRQS:2304 nr_irqs:2560
[    1.872908] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    1.872912] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    1.872915] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[    1.872922] xen_allocate_pirq: returning irq 9 for gsi 9
[    1.872957] xen: acpi sci 9
[    1.876457] Console: colour VGA+ 80x25
[   17.017493] console [ttyS0] enabled
[   17.021410] installing Xen timer for CPU 0
[   17.026004] Detected 2533.378 MHz processor.
[   17.030776] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.75 BogoMIPS (lpj=2533378)
[   17.042642] Security Framework initialized
[   17.047214] SELinux:  Initializing.
[   17.051119] Mount-cache hash table entries: 512
[   17.056376] Initializing cgroup subsys ns
[   17.060852] Initializing cgroup subsys cpuacct
[   17.065814] Initializing cgroup subsys freezer
[   17.070805] CPU: L1 I cache: 32K, L1 D cache: 32K
[   17.076067] CPU: L2 cache: 256K
[   17.079572] CPU: L3 cache: 8192K
[   17.083181] CPU: Physical Processor ID: 0
[   17.087654] CPU: Processor Core ID: 0
[   17.091747] mce: CPU supports 9 MCE banks
[   17.096245] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
[   17.106949] SMP alternatives: switching to UP code
[   17.159673] ACPI: Core revision 20090903
[   17.201965] installing Xen timer for CPU 1
[   17.206574] SMP alternatives: switching to SMP code
[    0.000014] Initializing CPU#1
[    0.000072] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000075] CPU: L2 cache: 256K
[    0.000077] CPU: L3 cache: 8192K
[    0.000081] CPU: Physical Processor ID: 1
[    0.000083] CPU: Processor Core ID: 0
[   17.258583] installing Xen timer for CPU 2
[    0.000005] Initializing CPU#2
[    0.000036] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000039] CPU: L2 cache: 256K
[    0.000041] CPU: L3 cache: 8192K
[    0.000045] CPU: Physical Processor ID: 0
[    0.000047] CPU: Processor Core ID: 1
[   17.287708] installing Xen timer for CPU 3
[    0.000009] Initializing CPU#3
[    0.000046] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000049] CPU: L2 cache: 256K
[    0.000051] CPU: L3 cache: 8192K
[    0.000055] CPU: Physical Processor ID: 1
[    0.000057] CPU: Processor Core ID: 1
[   17.316844] installing Xen timer for CPU 4
[    0.000005] Initializing CPU#4
[    0.000035] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000038] CPU: L2 cache: 256K
[    0.000040] CPU: L3 cache: 8192K
[    0.000044] CPU: Physical Processor ID: 0
[    0.000046] CPU: Processor Core ID: 2
[   17.345949] installing Xen timer for CPU 5
[    0.000009] Initializing CPU#5
[    0.000056] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000064] CPU: L2 cache: 256K
[    0.000065] CPU: L3 cache: 8192K
[    0.000069] CPU: Physical Processor ID: 1
[    0.000071] CPU: Processor Core ID: 2
[   17.375084] installing Xen timer for CPU 6
[    0.000005] Initializing CPU#6
[    0.000035] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000038] CPU: L2 cache: 256K
[    0.000040] CPU: L3 cache: 8192K
[    0.000044] CPU: Physical Processor ID: 0
[    0.000046] CPU: Processor Core ID: 3
[   17.404208] installing Xen timer for CPU 7
[    0.000009] Initializing CPU#7
[    0.000045] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000048] CPU: L2 cache: 256K
[    0.000050] CPU: L3 cache: 8192K
[    0.000054] CPU: Physical Processor ID: 1
[    0.000055] CPU: Processor Core ID: 3
[   17.433340] installing Xen timer for CPU 8
[    0.000005] Initializing CPU#8
[    0.000040] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000045] CPU: L2 cache: 256K
[    0.000047] CPU: L3 cache: 8192K
[    0.000052] CPU: Physical Processor ID: 0
[    0.000055] CPU: Processor Core ID: 0
[   17.462474] installing Xen timer for CPU 9
[    0.000007] Initializing CPU#9
[    0.000042] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000045] CPU: L2 cache: 256K
[    0.000047] CPU: L3 cache: 8192K
[    0.000051] CPU: Physical Processor ID: 1
[    0.000052] CPU: Processor Core ID: 0
[   17.491600] installing Xen timer for CPU 10
[    0.000004] Initializing CPU#10
[    0.000031] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000034] CPU: L2 cache: 256K
[    0.000036] CPU: L3 cache: 8192K
[    0.000039] CPU: Physical Processor ID: 0
[    0.000041] CPU: Processor Core ID: 1
[   17.520818] installing Xen timer for CPU 11
[    0.000007] Initializing CPU#11
[    0.000041] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000044] CPU: L2 cache: 256K
[    0.000046] CPU: L3 cache: 8192K
[    0.000050] CPU: Physical Processor ID: 1
[    0.000052] CPU: Processor Core ID: 1
[   17.550140] installing Xen timer for CPU 12
[    0.000004] Initializing CPU#12
[    0.000030] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000033] CPU: L2 cache: 256K
[    0.000035] CPU: L3 cache: 8192K
[    0.000039] CPU: Physical Processor ID: 0
[    0.000041] CPU: Processor Core ID: 2
[   17.579448] installing Xen timer for CPU 13
[    0.000007] Initializing CPU#13
[    0.000050] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000055] CPU: L2 cache: 256K
[    0.000058] CPU: L3 cache: 8192K
[    0.000066] CPU: Physical Processor ID: 1
[    0.000068] CPU: Processor Core ID: 2
[   17.608781] installing Xen timer for CPU 14
[    0.000004] Initializing CPU#14
[    0.000031] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000034] CPU: L2 cache: 256K
[    0.000035] CPU: L3 cache: 8192K
[    0.000039] CPU: Physical Processor ID: 0
[    0.000041] CPU: Processor Core ID: 3
[   17.638093] installing Xen timer for CPU 15
[    0.000007] Initializing CPU#15
[    0.000050] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000055] CPU: L2 cache: 256K
[    0.000058] CPU: L3 cache: 8192K
[    0.000064] CPU: Physical Processor ID: 1
[    0.000067] CPU: Processor Core ID: 3
[   17.667378] Brought up 16 CPUs
[   17.695272] BUG: unable to handle kernel NULL pointer dereference at (null)
[   17.703059] IP: [<c1037429>] cpu_attach_domain+0x57/0x110
[   17.709106] *pdpt = 00000000017fc001 *pde = 0000000000000000
[   17.715555] Oops: 0000 [#1] SMP
[   17.719188] last sysfs file:
[   17.722492] Modules linked in:
[   17.725902]
[   17.727568] Pid: 1, comm: swapper Tainted: G        W  (2.6.32.13 #2) S5520HC
[   17.735537] EIP: 0061:[<c1037429>] EFLAGS: 00010206 CPU: 0
[   17.741662] EIP is at cpu_attach_domain+0x57/0x110
[   17.747011] EAX: 00000000 EBX: c18df1fc ECX: 00000000 EDX: 0000042f
[   17.754010] ESI: c18df108 EDI: c18def20 EBP: e5c85f40 ESP: e5c85f24
[   17.761007]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: e021
[   17.767037] Process swapper (pid: 1, ti=e5c84000 task=e5c88000 task.ti=e5c84000)
[   17.775295] Stack:
[   17.777542]  e5c10800 c18e3d00 0000042f 0000102f 00000000 c17edf20 00000008 e5c85fac
[   17.786089] <0> c1037d5c c17ee2e4 c17ee1fc 00000000 e5c46138 00000010 e5c85f85 c1032895
[   17.795150] <0> e5d23040 c1706830 00000020 00000001 c10c5cdf 00000000 e5c85fac 00000000
[   17.804432] Call Trace:
[   17.807166]  [<c1037d5c>] ? __build_sched_domains+0x6e8/0x743
[   17.813584]  [<c1032895>] ? kzalloc+0xb/0xd
[   17.818257]  [<c10c5cdf>] ? __kmalloc+0x145/0x151
[   17.823514]  [<c1794e23>] ? sched_init_smp+0xc5/0x167
[   17.829157]  [<c17802e0>] ? kernel_init+0xd8/0x169
[   17.834509]  [<c1780208>] ? kernel_init+0x0/0x169
[   17.839766]  [<c100a0b7>] ? kernel_thread_helper+0x7/0x10
[   17.845793] Code: 38 89 45 f0 8b 43 38 89 45 ec 8b 83 e4 00 00 00 25 ff ff 00 00 e8 b8 2f 17 00 48 74 48 8b 53 38 f7 c2 8f 02 00 00 74 0b 8b 43 08 <3b> 00 0f 85 9a 00 00 00 80 e2 20 0f 85 91 00 00 00 eb 27 8b 43
[   17.867862] EIP: [<c1037429>] cpu_attach_domain+0x57/0x110 SS:ESP e021:e5c85f24
[   17.876058] CR2: 0000000000000000
[   17.879761] ---[ end trace 4eaa2a86a8e2da5a ]---
[   17.884930] swapper used greatest stack depth: 6412 bytes left
[   17.891448] Kernel panic - not syncing: Attempted to kill init!
[   17.898058] Pid: 1, comm: swapper Tainted: G      D W  2.6.32.13 #2
[   17.905054] Call Trace:
[   17.907780]  [<c14b7acc>] ? printk+0xf/0x11
[   17.912485]  [<c14b7a09>] panic+0x39/0xed
[   17.916964]  [<c10406d9>] do_exit+0x5c/0x66a
[   17.921733]  [<c14b7acc>] ? printk+0xf/0x11
[   17.926405]  [<c14ba2f4>] oops_end+0xa8/0xb0
[   17.931174]  [<c1025fdf>] no_context+0x137/0x141
[   17.936333]  [<c1006c67>] ? xen_force_evtchn_callback+0xf/0x14
[   17.942848]  [<c1026128>] __bad_area_nosemaphore+0x13f/0x147
[   17.949168]  [<c10073b3>] ? xen_restore_fl_direct_end+0x0/0x1
[   17.955588]  [<c1043231>] ? do_softirq+0x75/0x79
[   17.960745]  [<c1043314>] ? irq_exit+0x39/0x5c
[   17.965709]  [<c11fe2d6>] ? xen_evtchn_do_upcall+0x25/0x30
[   17.971836]  [<c100a107>] ? xen_do_upcall+0x7/0xc
[   17.977091]  [<c1002227>] ? hypercall_page+0x227/0x1005
[   17.982928]  [<c1006c67>] ? xen_force_evtchn_callback+0xf/0x14
[   17.989441]  [<c102613d>] bad_area_nosemaphore+0xd/0x10
[   17.995277]  [<c14bb538>] do_page_fault+0x1c6/0x32b
[   18.000725]  [<c14bb372>] ? do_page_fault+0x0/0x32b
[   18.006172]  [<c14b992e>] error_code+0x66/0x6c
[   18.011135]  [<c14bb372>] ? do_page_fault+0x0/0x32b
[   18.016585]  [<c1037429>] ? cpu_attach_domain+0x57/0x110
[   18.022518]  [<c1037d5c>] __build_sched_domains+0x6e8/0x743
[   18.028741]  [<c1032895>] ? kzalloc+0xb/0xd
[   18.033414]  [<c10c5cdf>] ? __kmalloc+0x145/0x151
[   18.038668]  [<c1794e23>] sched_init_smp+0xc5/0x167
[   18.044115]  [<c17802e0>] kernel_init+0xd8/0x169
[   18.049272]  [<c1780208>] ? kernel_init+0x0/0x169
[   18.054528]  [<c100a0b7>] kernel_thread_helper+0x7/0x10


--
"We learn from failure, not from success!"
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.