[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: FW: [Xen-devel] using OCAML xenstored
In that patchqueue patches 3/7, 4/7, 5/7, 6/7 are only needed if you are compiling the ocaml xenstored to run in a stub domain. I assume you are compiling it for dom0 so you probably don't need it. Regards, Alex On 26/05/10 19:27, Yuvraj Agarwal wrote: Alex, Thanks for your tip. Do you think just applying the patch to fix the install path to the Makefile will fix it or will I need the other 6 patches as well (which seem quite extensive)? I am just wondering if there was another intended way (by the maintainers) to install the OCAML version of xenstored side-by-side with the C- version and have the option to use either one.... Thanks Yuvraj -----Original Message----- From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Alex Zeffertt Sent: Wednesday, May 26, 2010 3:28 AM To: Yuvraj Agarwal Cc: 'xen-devel' Subject: Re: FW: [Xen-devel] using OCAML xenstored Some time ago I sent some patches against xen-ocaml-tools.hg to make it work as replacement for the C xenstored in xen-unstable.hg. One of the patches was to fix this install path issue: http://lists.xensource.com/archives/html/xen-devel/2009-04/msg00697.html I don't think these patches were applied. (I don't know if there is a reason for this.) It might be worth checking out the whole patch queue if you are intending to use it with xen-unstable.hg. Regards, Alex On 26/05/10 05:31, Yuvraj Agarwal wrote:Hi, Just posting this on the list too in case anyone else has experience with the OCAML version of xenstored…. --Yuvraj *From:* Yuvraj Agarwal [mailto:yuvraj@xxxxxxxxxxx] *Sent:* Tuesday, May 25, 2010 10:26 AM *To:* 'Boris Derzhavets'; 'Pasi Kärkkäinen' *Subject:* RE: [Xen-devel] using OCAML xenstored Hi Boris and Pasi, I checked out the latest xen-testing from mercurial, and edited the Config.mk file to have the OCAML version of xenstored built. I checked and made sure that I have all the patches, and my xm info shows 4.0.1-rc1. After that I built using: make xen; make tools; make stubdom make install-xen; make install-tools PYTHON_PREFIX_ARG=; make install-stubdom Unfortunately, it looks like even though the new OCAML version of xenstored is built, it appears in /usr/bin/xenstored instead of the usual “/usr/sbin/xenstored” and the default part of the xenstored to use is the standard one (not the OCAML one)… Just FYI: This is an Ubuntu 10.04 64 bit system. root@ BlackBox:/# ll /usr/bin/xenstored (new OCAML xenstored I just built..) -rwxr-xr-x 1 root root 925039 2010-05-25 10:15 /usr/bin/xenstored root@ BlackBox:/# ll /usr/sbin/xenstored (<< Standard C xenstored) -rwxr-xr-x 1 root root 94728 2010-05-01 00:36 /usr/sbin/xenstored root@ BlackBox:/# which xenstored /usr/sbin/xenstored root@BlackBox:/# thanks Yuvraj * * *From:* xen-devel-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] *On Behalf Of *Boris Derzhavets *Sent:* Sunday, May 23, 2010 11:47 AM *To:* Yuvraj Agarwal; Pasi Kärkkäinen *Cc:* xen-devel@xxxxxxxxxxxxxxxxxxx *Subject:* Re: [Xen-devel] using OCAML xenstored > 4. "make xen", make "tools" and then the "make xen-install" and "make > install-tools PYTHON_PREFIX_ARG=" make install-tools PYTHON_PREFIX_ARG= Wrong syntax when install tools Boris BTW. Just a notice. --- On *Sun, 5/23/10, Pasi Kärkkäinen /<pasik@xxxxxx <mailto:pasik@xxxxxx>>/* wrote: From: Pasi Kärkkäinen<pasik@xxxxxx<mailto:pasik@xxxxxx>> Subject: Re: [Xen-devel] using OCAML xenstored To: "Yuvraj Agarwal"<yuvraj@xxxxxxxxxxx<mailto:yuvraj@xxxxxxxxxxx>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx<mailto:xen-devel@xxxxxxxxxxxxxxxxxxx> Date: Sunday, May 23, 2010, 9:59 AM On Sat, May 22, 2010 at 05:48:58PM -0700, Yuvraj Agarwal wrote: > Hi All, > > I would like to give the OCAML version of xenstored a shot, since the > older version (in C) takes a long time to start up a large number ofVMs.> I have a new machine (Ubuntu 10.04 64bit) that I plan to give this atry> with. Is there something else that I need to do besides thefollowing:> > 1. Build the 2.6.32 pvops kernel as specified in: > http://wiki.xensource.com/xenwiki/XenParavirtOps > < DONE> > 2. Download the xen-4.0.0 stable version from > http://www.xen.org/products/xen_source.html > 3. change Config.mk flag CONFIG_OCAML_XENSTORED ?= n to "y" as" > CONFIG_OCAML_XENSTORED ?= y > 4. "make xen", make "tools" and then the "make xen-install" and "make > install-tools PYTHON_PREFIX_ARG=" > > Is there something else needed? Are there any recent patches to theOCAML> xenstored that I need to apply? > Just browse through http://xenbits.xen.org/xen-unstable.hd and http://xenbits.xen.org/xen-4.0-testing.hg changelogs. xen-4.0-testing.hg is currently at 4.0.1-rc1 stage. -- Pasi _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx</mc/compose?to=Xen-devel@xxxxxxxxxxxxxxxxxxx>http://lists.xensource.com/xen-devel_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |