Re: [Xen-devel] Xen 4.1-unstable does not boot up

[Keir Fraser <keir.fraser@xxxxxxxxxxxxx>]

Please change the Dprintk macro definition in include/asm-x86/apic.h to:
#define Dprintk(x...) printk(x)

Rebuild and send the log output. I've changed lots of smpboot code and
something is obviously up.

There are also other warnings in the below log, about a fixed MCE and also
about a BIOS bug. It would be interesting to know what the most recent
xen-unstable changeset is that works for you, if reasonably recent, and also
whether its boot output similarly indicates a somewhat dodgy system.

 -- Keir

On 21/05/2010 12:56, "Masaki Kanno" <kanno.masaki@xxxxxxxxxxxxxx> wrote:

> Hi,
> 
> An APIC error continues happening.
> 
>   __  __            _  _    _                    _        _     _
>  \ \/ /___ _ __   | || |  / |   _   _ _ __  ___| |_ __ _| |__ | | ___
>   \  // _ \ '_ \  | || |_ | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
>   /  \  __/ | | | |__   _|| |__| |_| | | | \__ \ || (_| | |_) | |  __/
>  /_/\_\___|_| |_|    |_|(_)_|   \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
>                  
> (XEN) Xen version 4.1-unstable (root@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2
> 20070626 (Red Hat 4.1.2-14)) Fri May 21 11:56:27 JST 2010
> (XEN) Latest ChangeSet: Wed May 19 22:59:52 2010 +0100 21438:840f269d95fb
> (XEN) Console output is synchronous.
> (XEN) Command line: loglvl=all guest_loglvl=all sync_console console_to_ring
> com1=9600,8n1 console=com1
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: V2; EDID transfer time: 2 seconds
> (XEN) Disc information:
> (XEN)  Found 1 MBR signatures
> (XEN)  Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009ec00 (usable)
> (XEN)  000000000009ec00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 000000003fef0000 (usable)
> (XEN)  000000003fef0000 - 000000003feff000 (reserved)
> (XEN)  000000003feff000 - 000000003ff00000 (ACPI NVS)
> (XEN)  000000003ff00000 - 0000000040000000 (usable)
> (XEN)  00000000fec00000 - 00000000fec10000 (reserved)
> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> (XEN)  00000000fff80000 - 0000000100000000 (reserved)
> (XEN) System RAM: 1023MB (1048120kB)
> (XEN) ACPI: RSDP 000F8010, 0014 (r0 PTLTD )
> (XEN) ACPI: RSDT 3FEFD053, 0034 (r1 PTLTD    RSDT    13E0000  LTP        0)
> (XEN) ACPI: FACP 3FEFEEA0, 0074 (r1 QUANTA S31       13E0000 MSFT     1000)
> (XEN) ACPI: DSDT 3FEFD087, 1E19 (r1 Quanta      S31  13E0000 MSFT  100000D)
> (XEN) ACPI: FACS 3FEFFFC0, 0040
> (XEN) ACPI: SPCR 3FEFEF14, 0050 (r1 PTLTD  $UCRTBL$  13E0000 PTL         1)
> (XEN) ACPI: APIC 3FEFEF64, 0074 (r1 PTLTD        APIC    13E0000  LTP
> 0)
> (XEN) ACPI: BOOT 3FEFEFD8, 0028 (r1 PTLTD  $SBFTBL$  13E0000  LTP        1)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000040000000
> (XEN) Xen heap: 9MB (9748kB)
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000f8080
> (XEN) DMI present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x508
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[544,504], pm1x_evt[540,500]
> (XEN) ACPI:                  wakeup_vec[3fefffcc], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled)
> (XEN) Processor #3 6:11 APIC version 17
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 6:11 APIC version 17
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-15
> (XEN) ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[16])
> (XEN) IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, GSI 16-31
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 997.483 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) MCE: The hardware reports a non fatal, correctable incident occurred on
> CPU 0.
> (XEN) Bank 1: f200000000000101
> (XEN) Intel machine check reporting enabled
> (XEN) I/O virtualisation disabled
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using new ACK method
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> (XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
> (XEN) ...trying to set up timer as Virtual Wire IRQ... works.
> (XEN) Platform timer is 3.579MHz ACPI PM Timer
> EN) Allocated console ring of 16 KiB.
> (XEN) APIC error on CPU0: 00(04)
> (XEN) APIC error on CPU0: 04(04)
> (XEN) APIC error on CPU0: 04(04)
> (XEN) APIC error on CPU0: 04(04)
> (XEN) APIC error on CPU0: 04(04)
> (XEN) APIC error on CPU0: 04(04)
> 
> 
> Best regards,
>  Kan
> 
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel