|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH] xl: use help table to describe command help information
This patch generate a help table to describe command help
information.
Signed-off-by: Wei Yongjun <yjwei@xxxxxxxxxxxxxx>
diff -r ac61c50eb031 -r 9530370da103 tools/libxl/xl_cmdimpl.c
--- a/tools/libxl/xl_cmdimpl.c Mon May 10 14:50:48 2010 +0800
+++ b/tools/libxl/xl_cmdimpl.c Mon May 10 15:03:03 2010 +0800
@@ -1164,111 +1164,15 @@
for (i = 0; i < cmdtable_len; i++)
printf(" %-20s%s\n",
cmd_table[i].cmd_name, cmd_table[i].cmd_desc);
- } else if(!strcmp(command, "create")) {
- printf("Usage: xl create <ConfigFile> [options] [vars]\n\n");
- printf("Create a domain based on <ConfigFile>.\n\n");
- printf("Options:\n\n");
- printf("-h Print this help.\n");
- printf("-p Leave the domain paused after it is
created.\n");
- printf("-c Connect to the console after the domain
is created.\n");
- printf("-d Enable debug messages.\n");
- printf("-e Do not wait in the background for the
death of the domain.\n");
- } else if(!strcmp(command, "list")) {
- printf("Usage: xl list [-v] [Domain]\n\n");
- printf("List information about all/some domains.\n\n");
- } else if(!strcmp(command, "pci-attach")) {
- printf("Usage: xl pci-attach <Domain> <BDF> [Virtual Slot]\n\n");
- printf("Insert a new pass-through pci device.\n\n");
- } else if(!strcmp(command, "pci-detach")) {
- printf("Usage: xl pci-detach <Domain> <BDF>\n\n");
- printf("Remove a domain's pass-through pci device.\n\n");
- } else if(!strcmp(command, "pci-list")) {
- printf("Usage: xl pci-list <Domain>\n\n");
- printf("List pass-through pci devices for a domain.\n\n");
- } else if(!strcmp(command, "pause")) {
- printf("Usage: xl pause <Domain>\n\n");
- printf("Pause execution of a domain.\n\n");
- } else if(!strcmp(command, "unpause")) {
- printf("Usage: xl unpause <Domain>\n\n");
- printf("Unpause a paused domain.\n\n");
- } else if(!strcmp(command, "save")) {
- printf("Usage: xl save [options] <Domain> <CheckpointFile>
[<ConfigFile>]\n\n");
- printf("Save a domain state to restore later.\n\n");
- printf("Options:\n\n");
- printf("-h Print this help.\n");
- printf("-c Leave domain running after creating the
snapshot.\n");
- } else if(!strcmp(command, "restore")) {
- printf("Usage: xl restore [options] [<ConfigFile>]
<CheckpointFile>\n\n");
- printf("Restore a domain from a saved state.\n\n");
- printf("Options:\n\n");
- printf("-h Print this help.\n");
- printf("-p Do not unpause domain after restoring
it.\n");
- printf("-e Do not wait in the background for the
death of the domain.\n");
- printf("-d Enable debug messages.\n");
- } else if(!strcmp(command, "migrate")) {
- printf("Usage: xl migrate [options] <Domain> <host>\n\n");
- printf("Save a domain state to restore later.\n\n");
- printf("Options:\n\n");
- printf("-h Print this help.\n");
- printf("-C <config> Send <config> instead of config file
from creation.\n");
- printf("-s <sshcommand> Use <sshcommand> instead of ssh.
String will be passed to sh. If empty, run <host> instead of ssh <host> xl
migrate-receive [-d -e]\n");
- printf("-e Do not wait in the background (on
<host>) for the death of the domain.\n");
- } else if(!strcmp(command, "migrate-receive")) {
- printf("Usage: xl migrate-receive - for internal use only");
- } else if(!strcmp(command, "restore")) {
- printf("Usage: xl restore [options] [<ConfigFile>]
<CheckpointFile>\n\n");
- printf("Restore a domain from a saved state.\n\n");
- printf("Options:\n\n");
- printf("-h Print this help.\n");
- printf("-O Old (configless) xl save format.\n");
- printf("-p Do not unpause domain after restoring
it.\n");
- printf("-e Do not wait in the background for the
death of the domain.\n");
- } else if(!strcmp(command, "destroy")) {
- printf("Usage: xl destroy <Domain>\n\n");
- printf("Terminate a domain immediately.\n\n");
- } else if (!strcmp(command, "console")) {
- printf("Usage: xl console <Domain>\n\n");
- printf("Attach to domain's console.\n\n");
- } else if (!strcmp(command, "cd-insert")) {
- printf("Usage: xl cd-insert <Domain> <VirtualDevice> <type:path>\n\n");
- printf("Insert a cdrom into a guest's cd drive.\n\n");
- } else if (!strcmp(command, "cd-eject")) {
- printf("Usage: xl cd-eject <Domain> <VirtualDevice>\n\n");
- printf("Eject a cdrom from a guest's cd drive.\n\n");
- } else if (!strcmp(command, "mem-set")) {
- printf("Usage: xl mem-set <Domain> <MemKB>\n\n");
- printf("Set the current memory usage for a domain.\n\n");
- } else if (!strcmp(command, "button-press")) {
- printf("Usage: xl button-press <Domain> <Button>\n\n");
- printf("Indicate <Button> press to a domain.\n");
- printf("<Button> may be 'power' or 'sleep'.\n\n");
- } else if (!strcmp(command, "vcpu-list")) {
- printf("Usage: xl vcpu-list [Domain, ...]\n\n");
- printf("List the VCPUs for all/some domains.\n\n");
- } else if (!strcmp(command, "vcpu-pin")) {
- printf("Usage: xl vcpu-pin <Domain> <VCPU|all> <CPUs|all>\n\n");
- printf("Set which CPUs a VCPU can use.\n\n");
- } else if (!strcmp(command, "vcpu-set")) {
- printf("Usage: xl vcpu-set <Domain> <vCPUs>\n\n");
- printf("Set the number of active VCPUs for allowed for the
domain.\n\n");
- } else if(!strcmp(command, "info")) {
- printf("Usage: xl info\n\n");
- printf("Get information about Xen host.\n\n");
- } else if (!strcmp(command, "sched-credit")) {
- printf("Usage: xl sched-credit [-d <Domain>
[-w[=WEIGHT]|-c[=CAP]]]\n\n");
- printf("Get/set credit scheduler parameters.\n");
- printf(" -d DOMAIN, --domain=DOMAIN Domain to modify\n");
- printf(" -w WEIGHT, --weight=WEIGHT Weight (int)\n");
- printf(" -c CAP, --cap=CAP Cap (int)\n");
- } else if (!strcmp(command, "domid")) {
- printf("Usage: xl domid <DomainName>\n\n");
- printf("Convert a domain name to domain id.\n");
- } else if (!strcmp(command, "domname")) {
- printf("Usage: xl domname <DomainId>\n\n");
- printf("Convert a domain id to domain name.\n");
- } else if (!strcmp(command, "rename")) {
- printf("Usage: xl rename <Domain> <NewDomainName>\n\n");
- printf("Rename a domain.\n");
+ } else {
+ for (i = 0; cmd_htable[i].cmd_name != NULL; i++)
+ if (!strcmp(command, cmd_htable[i].cmd_name)) {
+ printf("%s", cmd_htable[i].cmd_help);
+ break;
+ }
+
+ if (!cmd_htable[i].cmd_name)
+ printf("no help information for command %s\n", command);
}
}
diff -r ac61c50eb031 -r 9530370da103 tools/libxl/xl_cmdtable.c
--- a/tools/libxl/xl_cmdtable.c Mon May 10 14:50:48 2010 +0800
+++ b/tools/libxl/xl_cmdtable.c Mon May 10 15:03:03 2010 +0800
@@ -14,6 +14,142 @@
#include "xl_cmdtable.h"
+struct cmd_help cmd_htable[] = {
+ { "create",
+ "Usage: xl create <ConfigFile> [options] [vars]\n\n"
+ "Create a domain based on <ConfigFile>.\n\n"
+ "Options:\n\n"
+ "-h Print this help.\n"
+ "-p Leave the domain paused after it is created.\n"
+ "-c Connect to the console after the domain is
created.\n"
+ "-d Enable debug messages.\n"
+ "-e Do not wait in the background for the death of
the domain.\n"
+ },
+ { "list",
+ "Usage: xl list [-v] [Domain]\n\n"
+ "List information about all/some domains.\n\n"
+ },
+ { "pci-attach",
+ "Usage: xl pci-attach <Domain> <BDF> [Virtual Slot]\n\n"
+ "Insert a new pass-through pci device.\n\n"
+ },
+ { "pci-detach",
+ "Usage: xl pci-detach <Domain> <BDF>\n\n"
+ "Remove a domain's pass-through pci device.\n\n"
+ },
+ { "pci-list",
+ "Usage: xl pci-list <Domain>\n\n"
+ "List pass-through pci devices for a domain.\n\n"
+ },
+ { "pause",
+ "Usage: xl pause <Domain>\n\n"
+ "Pause execution of a domain.\n\n"
+ },
+ { "unpause",
+ "Usage: xl unpause <Domain>\n\n"
+ "Unpause a paused domain.\n\n"
+ },
+ { "save",
+ "Usage: xl save [options] <Domain> <CheckpointFile> [<ConfigFile>]\n\n"
+ "Save a domain state to restore later.\n\n"
+ "Options:\n\n"
+ "-h Print this help.\n"
+ "-c Leave domain running after creating the
snapshot.\n"
+ },
+ { "restore",
+ "Usage: xl restore [options] [<ConfigFile>] <CheckpointFile>\n\n"
+ "Restore a domain from a saved state.\n\n"
+ "Options:\n\n"
+ "-h Print this help.\n"
+ "-p Do not unpause domain after restoring it.\n"
+ "-e Do not wait in the background for the death of
the domain.\n"
+ "-d Enable debug messages.\n"
+ },
+ { "migrate",
+ "Usage: xl migrate [options] <Domain> <host>\n\n"
+ "Save a domain state to restore later.\n\n"
+ "Options:\n\n"
+ "-h Print this help.\n"
+ "-C <config> Send <config> instead of config file from
creation.\n"
+ "-s <sshcommand> Use <sshcommand> instead of ssh. String will
be passed to sh."
+ " If empty, run <host> instead of ssh <host> xl migrate-receive [-d
-e]\n"
+ "-e Do not wait in the background (on <host>) for
the death of the domain.\n"
+ },
+ { "migrate-receive",
+ "Usage: xl migrate-receive - for internal use only"
+ },
+ { "restore",
+ "Usage: xl restore [options] [<ConfigFile>] <CheckpointFile>\n\n"
+ "Restore a domain from a saved state.\n\n"
+ "Options:\n\n"
+ "-h Print this help.\n"
+ "-O Old (configless) xl save format.\n"
+ "-p Do not unpause domain after restoring it.\n"
+ "-e Do not wait in the background for the death of
the domain.\n"
+ },
+ { "destroy",
+ "Usage: xl destroy <Domain>\n\n"
+ "Terminate a domain immediately.\n\n"
+ },
+ { "console",
+ "Usage: xl console <Domain>\n\n"
+ "Attach to domain's console.\n\n"
+ },
+ { "cd-insert",
+ "Usage: xl cd-insert <Domain> <VirtualDevice> <type:path>\n\n"
+ "Insert a cdrom into a guest's cd drive.\n\n"
+ },
+ { "cd-eject",
+ "Usage: xl cd-eject <Domain> <VirtualDevice>\n\n"
+ "Eject a cdrom from a guest's cd drive.\n\n"
+ },
+ { "mem-set",
+ "Usage: xl mem-set <Domain> <MemKB>\n\n"
+ "Set the current memory usage for a domain.\n\n"
+ },
+ { "button-press",
+ "Usage: xl button-press <Domain> <Button>\n\n"
+ "Indicate <Button> press to a domain.\n"
+ "<Button> may be 'power' or 'sleep'.\n\n"
+ },
+ { "vcpu-list",
+ "Usage: xl vcpu-list [Domain, ...]\n\n"
+ "List the VCPUs for all/some domains.\n\n"
+ },
+ { "vcpu-pin",
+ "Usage: xl vcpu-pin <Domain> <VCPU|all> <CPUs|all>\n\n"
+ "Set which CPUs a VCPU can use.\n\n"
+ },
+ { "vcpu-set",
+ "Usage: xl vcpu-set <Domain> <vCPUs>\n\n"
+ "Set the number of active VCPUs for allowed for the domain.\n\n"
+ },
+ { "info",
+ "Usage: xl info\n\n"
+ "Get information about Xen host.\n\n"
+ },
+ { "sched-credit",
+ "Usage: xl sched-credit [-d <Domain> [-w[=WEIGHT]|-c[=CAP]]]\n\n"
+ "Get/set credit scheduler parameters.\n"
+ " -d DOMAIN, --domain=DOMAIN Domain to modify\n"
+ " -w WEIGHT, --weight=WEIGHT Weight (int)\n"
+ " -c CAP, --cap=CAP Cap (int)\n"
+ },
+ { "domid",
+ "Usage: xl domid <DomainName>\n\n"
+ "Convert a domain name to domain id.\n"
+ },
+ { "domname",
+ "Usage: xl domname <DomainId>\n\n"
+ "Convert a domain id to domain name.\n"
+ },
+ { "rename",
+ "Usage: xl rename <Domain> <NewDomainName>\n\n"
+ "Rename a domain.\n"
+ },
+ { /* NULL */ },
+};
+
struct cmd_spec cmd_table[] = {
{ "create", &main_create, "create a domain from config file <filename>" },
{ "list", &main_list, "list information about all domains" },
diff -r ac61c50eb031 -r 9530370da103 tools/libxl/xl_cmdtable.h
--- a/tools/libxl/xl_cmdtable.h Mon May 10 14:50:48 2010 +0800
+++ b/tools/libxl/xl_cmdtable.h Mon May 10 15:03:03 2010 +0800
@@ -14,11 +14,17 @@
#include "xl_cmdimpl.h"
+struct cmd_help {
+ char *cmd_name;
+ char *cmd_help;
+};
+
struct cmd_spec {
char *cmd_name;
int (*cmd_impl)(int argc, char **argv);
char *cmd_desc;
};
+extern struct cmd_help cmd_htable[];
extern struct cmd_spec cmd_table[];
extern int cmdtable_len;
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |