[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Debian linux-image-2.6.32-4-xen-amd64 2.6.32-11 doesn't boot with > 4 GiB; resets immediatelly, no log messages
Hello! This was originally reported to the Debian BTS, <http://bugs.debian.org/576877>, but Ian Campbell suggested to forward it to xen-devel. To get the Debian linux-image-2.6.32-4-xen-amd64 2.6.32-11 kernel to boot, I need to supply mem=4G. This was not necessary with the 2.6.32-10 kernel. I only changed the kernel, no further changes. 2.6.32-11 is ``based on commit f64df18aae5ab07b44bdcc2334cf0044ef46320c of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git.'' -- according to debian/patches/features/all/xen/pvops.patch. commit f64df18aae5ab07b44bdcc2334cf0044ef46320c Merge: d945b01 d69a8da Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@xxxxxxxxxx> Date: Thu Mar 25 17:00:21 2010 -0700 Merge commit 'd69a8da4f6f2bb1815d2bc2f49afed3f3ee4f07d' into xen/stable-2.6.32.x * commit 'd69a8da4f6f2bb1815d2bc2f49afed3f3ee4f07d': xen/apic: Don't register GSI in pre-setup xen/apic: Map physical interrupt before setting up GSI xen/apic: Control-flow cleanup in xen_register_gsi The noreboot and nopat options that Ian suggested in <http://bugs.debian.org/576877#10> have no effect. (I always have noreboot specified.) 2.6.32-10: (XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (waldi@xxxxxxxxxx) (gcc version 4.4.3 (Debian 4.4.3-2) ) Mon Mar 1 21:16:18 UTC 2010 (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e000 (usable) (XEN) 000000000009e000 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ddee0000 (usable) (XEN) 00000000ddee0000 - 00000000ddeef000 (ACPI data) (XEN) 00000000ddeef000 - 00000000ddf00000 (ACPI NVS) (XEN) 00000000ddf00000 - 00000000e0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000120000000 (usable) (XEN) System RAM: 4062MB (4159992kB) 2.6.32-11: resets the machine immediatelly, no log messages visible (don't have serial console set-up). 2.6.32-11, with mem=4G: (XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (waldi@xxxxxxxxxx) (gcc version 4.4.3 (Debian 4.4.3-2) ) Mon Mar 1 21:16:18 UTC 2010 (XEN) Command line: mem=4G (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Truncating RAM from 4718592kB to 4194304kB (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e000 (usable) (XEN) 000000000009e000 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000ddee0000 (usable) (XEN) 00000000ddee0000 - 00000000ddeef000 (ACPI data) (XEN) 00000000ddeef000 - 00000000ddf00000 (ACPI NVS) (XEN) 00000000ddf00000 - 00000000e0000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) System RAM: 3550MB (3635704kB) /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Sempron(tm) Processor 3000+ stepping : 2 cpu MHz : 1800.085 cache size : 128 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr pae cx8 apic mtrr cmov clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up rep_good pni hypervisor lahf_lm bogomips : 3600.17 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc -- Package-specific info: ** Version: Linux version 2.6.32-4-xen-amd64 (Debian 2.6.32-11) (maks@xxxxxxxxxx) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Mon Apr 5 23:19:15 UTC 2010 ** Command line: root=/dev/mapper/vg0-boole--root ro console=tty0 ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 3.594644] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.595448] usbcore: registered new interface driver hiddev [ 3.599715] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.599855] sd 2:0:0:0: [sda] Write Protect is off [ 3.599893] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.599938] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.600295] sda: [ 3.603437] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0/input/input4 [ 3.603627] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-3/input0 [ 3.603717] usbcore: registered new interface driver usbhid [ 3.603755] usbhid: v2.6:USB HID core driver [ 3.613586] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.614071] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.625464] sda1 [ 3.626452] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.544048] floppy0: no floppy controllers found [ 5.611207] device-mapper: uevent: version 1.0.3 [ 5.612270] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 5.876201] PM: Starting manual resume from disk [ 5.876242] PM: Resume from partition 254:1 [ 5.876244] PM: Checking hibernation image. [ 5.876535] PM: Error -22 checking image file [ 5.876538] PM: Resume from disk failed. [ 5.929409] kjournald starting. Commit interval 5 seconds [ 5.929471] EXT3-fs: mounted filesystem with ordered data mode. [ 7.388166] udev: starting version 151 [ 7.941584] processor LNXCPU:00: registered as cooling_device0 [ 8.258516] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 8.273361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.552543] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.568814] EDAC MC: Ver: 2.1.0 Apr 5 2010 [ 8.582764] parport_pc 00:08: reported by Plug and Play ACPI [ 8.582899] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 8.675567] EDAC amd64_edac: Ver: 3.2.0 Apr 5 2010 [ 8.675964] EDAC amd64: ECC is enabled by BIOS. [ 8.676454] EDAC MC: Rev E or earlier detected [ 8.677722] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 8.678852] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 8.839689] Error: Driver 'pcspkr' is already registered, aborting... [ 8.989920] xen: registering gsi 18 triggering 0 polarity 1 [ 8.989933] alloc irq_desc for 18 on node 0 [ 8.989937] alloc kstat_irqs on node 0 [ 8.989947] xen: --> irq=18 [ 8.989958] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.312097] intel8x0_measure_ac97_clock: measured 53952 usecs (2596 samples) [ 9.312140] intel8x0: clocking to 48000 [ 11.580049] floppy0: no floppy controllers found [ 12.959737] EXT3 FS on dm-0, internal journal [ 13.297799] Adding 974840k swap on /dev/mapper/vg0-boole--swap. Priority:-1 extents:1 across:974840k [ 13.506263] kjournald starting. Commit interval 5 seconds [ 13.506564] EXT3 FS on dm-2, internal journal [ 13.506633] EXT3-fs: mounted filesystem with ordered data mode. [ 13.984105] loop: module loaded [ 14.288494] Bridge firewalling registered [ 14.333916] device eth0 entered promiscuous mode [ 14.337838] r8169: eth0: link up [ 14.345691] br0: port 1(eth0) entering learning state [ 24.588013] br0: no IPv6 routers present [ 24.992008] eth0: no IPv6 routers present [ 29.344014] br0: port 1(eth0) entering forwarding state [ 44.728065] RPC: Registered udp transport module. [ 44.728112] RPC: Registered tcp transport module. [ 44.728147] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 44.810238] Slow work thread pool: Starting up [ 44.810370] Slow work thread pool: Ready [ 44.810504] FS-Cache: Loaded [ 44.862639] FS-Cache: Netfs 'nfs' registered for caching [ 44.896796] svc: failed to register lockdv1 RPC service (errno 97). [ 45.430933] fuse init (API version 7.13) [ 46.057971] Event-channel device installed. [ 46.255770] alloc irq_desc for 502 on node 0 [ 46.255776] alloc kstat_irqs on node 0 [ 46.255853] xenbus_probe wake_waiting [ 46.255920] xenbus_probe wake_waiting [ 46.255975] alloc irq_desc for 501 on node 0 [ 46.255979] alloc kstat_irqs on node 0 [ 46.257009] XENBUS: Unable to read cpu state [ 46.257711] xenbus_probe_devices backend [ 46.258085] xenbus_probe_devices failed xenbus_directory [ 46.258128] backend_probe_and_watch devices probed ok [ 46.258386] backend_probe_and_watch watch add ok ok [ 46.258425] backend_probe_and_watch all done [ 46.258460] xenbus_probe_devices device [ 46.258667] xenbus_probe_devices failed xenbus_directory [ 46.258705] frontend_probe_and_watch devices probed ok [ 46.258883] frontend_probe_and_watch watch add ok ok [ 46.258920] frontend_probe_and_watch all done [ 54.348904] Bluetooth: Core ver 2.15 [ 54.349059] NET: Registered protocol family 31 [ 54.349096] Bluetooth: HCI device and connection manager initialized [ 54.349134] Bluetooth: HCI socket layer initialized [ 54.465496] Bluetooth: L2CAP ver 2.14 [ 54.465541] Bluetooth: L2CAP socket layer initialized [ 54.495468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.495515] Bluetooth: BNEP filters: protocol multicast [ 54.498713] Bluetooth: RFCOMM TTY layer initialized [ 54.498765] Bluetooth: RFCOMM socket layer initialized [ 54.498802] Bluetooth: RFCOMM ver 1.11 [ 54.532711] Bluetooth: SCO (Voice Link) ver 0.6 [ 54.532757] Bluetooth: SCO socket layer initialized ** Model information sys_vendor: FUJITSU SIEMENS product_name: D2264-A1 product_version: chassis_vendor: FUJITSU SIEMENS chassis_version: bios_vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd. bios_version: 5.00 R1.07-01.2264.A1 board_vendor: FUJITSU SIEMENS board_name: D2264-A1 board_version: S26361-D2264-A1 ** Loaded modules: Module Size Used by sco 7209 2 bnep 9411 2 rfcomm 29565 0 l2cap 24704 4 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41795 6 sco,bnep,rfcomm,l2cap rfkill 13012 2 bluetooth xen_evtchn 4259 1 xenfs 9472 1 fuse 50126 1 nfs 240554 1 lockd 57539 1 nfs fscache 29818 1 nfs nfs_acl 2031 1 nfs auth_rpcgss 33460 1 nfs sunrpc 161159 11 nfs,lockd,nfs_acl,auth_rpcgss bridge 39598 0 stp 1440 1 bridge loop 11783 0 snd_intel8x0 24122 0 snd_ac97_codec 99186 1 snd_intel8x0 ac97_bus 1086 1 snd_ac97_codec amd64_edac_mod 13630 0 snd_pcm 60503 2 snd_intel8x0,snd_ac97_codec parport_pc 18855 0 psmouse 49521 0 parport 27938 1 parport_pc snd_timer 15502 1 snd_pcm edac_core 29245 3 amd64_edac_mod shpchp 26264 0 edac_mce_amd 6369 1 amd64_edac_mod pcspkr 1699 0 serio_raw 3752 0 k8temp 3139 0 pci_hotplug 21171 1 shpchp snd 46350 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6217 2 snd_intel8x0,snd_pcm evdev 7336 11 container 2389 0 processor 30247 0 ext3 106502 2 jbd 37053 1 ext3 mbcache 4970 1 ext3 dm_mod 53674 18 sg 18744 0 sd_mod 29689 2 crc_t10dif 1276 1 sd_mod usbhid 33244 0 sr_mod 12602 0 hid 62793 1 usbhid cdrom 29399 1 sr_mod sata_sis 3730 1 ata_generic 2983 0 ohci_hcd 19212 0 pata_sis 9623 1 sata_sis ehci_hcd 30802 0 r8169 28877 0 mii 3210 1 r8169 libata 132183 3 sata_sis,ata_generic,pata_sis button 4634 0 usbcore 121815 4 usbhid,ohci_hcd,ehci_hcd nls_base 6377 1 usbcore scsi_mod 121925 4 sg,sd_mod,sr_mod,libata thermal 11674 0 fan 3346 0 thermal_sys 11878 3 processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 761/M761 Host [1039:0761] (rev 01) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1099] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=32M] Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 00002000-00002fff Memory behind bridge: fa100000-fa1fffff Prefetchable memory behind bridge: f0000000-f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] [1039:0965] (rev 48) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 Interrupt: pin ? routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1c80 [size=16] Capabilities: <access denied> Kernel driver in use: pata_sis 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Fujitsu Technology Solutions Device [1734:109c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 173 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 1400 [size=256] Region 1: I/O ports at 1000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at fa001000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin C routed to IRQ 22 Region 0: Memory at fa002000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 23 Region 0: Memory at fa003000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] 182 SATA/RAID Controller [1039:0182] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1095] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1cb0 [size=8] Region 1: I/O ports at 1ca4 [size=4] Region 2: I/O ports at 1ca8 [size=8] Region 3: I/O ports at 1ca0 [size=4] Region 4: I/O ports at 1c90 [size=16] Region 5: I/O ports at 1c00 [size=128] Capabilities: <access denied> Kernel driver in use: sata_sis 00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1091] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at fa004000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: r8169 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1099] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 BIST result: 00 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fa100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-xen-amd64 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-4-xen-amd64 depends on: ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy ii initramfs-tools 0.93.4 tools for generating an initramfs ii linux-base 2.6.32-11 Linux image base package ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-4-xen-amd64 recommends: ii firmware-linux-free 2.6.32-9 Binary firmware for various driver Versions of packages linux-image-2.6.32-4-xen-amd64 suggests: pn grub <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-4-xen-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) ii xen-hypervisor-3.4-amd64 [xe 3.4.3~rc3-1 The Xen Hypervisor on AMD64 -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-4-xen-amd64/prerm/would-invalidate-boot-loader-2.6.32-4-xen-amd64: true linux-image-2.6.32-4-xen-amd64/postinst/bootloader-test-error-2.6.32-4-xen-amd64: linux-image-2.6.32-4-xen-amd64/postinst/missing-firmware-2.6.32-4-xen-amd64: linux-image-2.6.32-4-xen-amd64/postinst/depmod-error-initrd-2.6.32-4-xen-amd64: false linux-image-2.6.32-4-xen-amd64/postinst/bootloader-error-2.6.32-4-xen-amd64: linux-image-2.6.32-4-xen-amd64/prerm/removing-running-kernel-2.6.32-4-xen-amd64: true Regards, Thomas Attachment:
signature.asc _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |