Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.6-pvops-dom0 (dpquigl@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #7 SMP Tue Jan 26 12:09:38 EST 2010 Command line: ro root=/dev/mapper/VolGroup-lv_root console=tty0 console=ttyS0,115200n8 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009a800 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfdffc00 (usable) BIOS-e820: 00000000bfdffc00 - 00000000bfe53c00 (ACPI NVS) BIOS-e820: 00000000bfe53c00 - 00000000bfe55c00 (ACPI data) BIOS-e820: 00000000bfe55c00 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000238000000 (usable) DMI 2.5 present. last_pfn = 0x238000 max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DBFFF write-protect DC000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0BFF00000 mask FFFF00000 uncachable 1 base 0C0000000 mask FC0000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbfdff max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bfdff000 0000000000 - 00bfc00000 page 2M 00bfc00000 - 00bfdff000 page 4k kernel direct mapping tables up to bfdff000 @ 8000-d000 init_memory_mapping: 0000000100000000-0000000238000000 0100000000 - 0238000000 page 2M kernel direct mapping tables up to 238000000 @ b000-15000 RAMDISK: 37c52000 - 37fef10d ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) ACPI: XSDT 00000000000fc7cd 0009C (v01 DELL B10K 00000015 ASL 00000061) ACPI: FACP 00000000000fc8fd 000F4 (v03 DELL B10K 00000015 ASL 00000061) ACPI: DSDT 00000000ffe9cfca 0545E (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 00000000bfdffc00 00040 ACPI: SSDT 00000000ffea2547 000AA (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 00000000000fc9f1 00092 (v01 DELL B10K 00000015 ASL 00000061) ACPI: BOOT 00000000000fca83 00028 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ASF! 00000000000fcaab 00096 (v32 DELL B10K 00000015 ASL 00000061) ACPI: MCFG 00000000000fcb41 0003E (v01 DELL B10K 00000015 ASL 00000061) ACPI: HPET 00000000000fcb7f 00038 (v01 DELL B10K 00000015 ASL 00000061) ACPI: TCPA 00000000000fcddb 00032 (v01 DELL B10K 00000015 ASL 00000061) ACPI: DMAR 00000000000fce0d 000D8 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SLIC 00000000000fcbb7 00176 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SSDT 00000000bfdffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bfe00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bfe00452 001F9 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bfe0085b 001F9 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bfe00c64 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000238000000 Bootmem setup node 0 0000000000000000-0000000238000000 NODE_DATA [0000000000010000 - 0000000000027fff] bootmap [0000000000028000 - 000000000006efff] pages 47 (8 early reservations) ==> bootmem [0000000000 - 0238000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000268b950] TEXT DATA BSS ==> [0001000000 - 000268b950] #3 [0037c52000 - 0037fef10d] RAMDISK ==> [0037c52000 - 0037fef10d] #4 [000009a800 - 0000100000] BIOS reserved ==> [000009a800 - 0000100000] #5 [000268c000 - 000268c1a0] BRK ==> [000268c000 - 000268c1a0] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000] found SMP MP-table at [ffff8800000fe710] fe710 [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880028600000-ffff8800353fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00238000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009a 0: 0x00000100 -> 0x000bfdff 0: 0x00100000 -> 0x00238000 On node 0 totalpages: 2063769 DMA zone: 104 pages used for memmap DMA zone: 112 pages reserved DMA zone: 3778 pages, LIFO batch:0 DMA32 zone: 26520 pages used for memmap DMA32 zone: 755303 pages, LIFO batch:31 Normal zone: 32448 pages used for memmap Normal zone: 1245504 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009a000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000bfdff000 - 00000000bfe00000 PM: Registered nosave memory: 00000000bfe00000 - 00000000bfe53000 PM: Registered nosave memory: 00000000bfe53000 - 00000000bfe54000 PM: Registered nosave memory: 00000000bfe54000 - 00000000bfe55000 PM: Registered nosave memory: 00000000bfe55000 - 00000000bfe56000 PM: Registered nosave memory: 00000000bfe56000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 478 pages at ffff880035400000, static data 1926752 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2004585 Policy zone: Normal Kernel command line: ro root=/dev/mapper/VolGroup-lv_root console=tty0 console=ttyS0,115200n8 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 8001152k/9306112k available (5231k kernel code, 1051036k absent, 253924k reserved, 3185k data, 3204k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Fast TSC calibration using PIT Detected 2992.072 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6207 kB per task-struct memory footprint: 2688 bytes allocated 82575360 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 16 of 16 active objects replaced hpet clockevent registered alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.14 BogoMIPS (lpj=2992072) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21402 entries in 84 pages DMAR:Host address width 36 DMAR:DRHD base: 0x000000fedc1000 flags: 0x0 IOMMU fedc1000: ver 1:0 cap c9008020e30272 ecap 1000 DMAR:DRHD base: 0x000000fedc3000 flags: 0x0 IOMMU fedc3000: ver 1:0 cap c0000020630272 ecap 1000 DMAR:DRHD base: 0x000000fedc4000 flags: 0x1 IOMMU fedc4000: ver 1:0 cap c9008020630272 ecap 1000 DMAR:RMRR base: 0x000000bfe58000 end: 0x000000bfe6ffff DMAR:No ATSR found Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5984.68 BogoMIPS (lpj=2992341) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. lockdep: fixing up alternatives. Booting processor 2 APIC 0x2 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5984.69 BogoMIPS (lpj=2992348) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 2/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 mce: CPU supports 6 MCE banks CPU2: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#2]: passed. lockdep: fixing up alternatives. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5984.69 BogoMIPS (lpj=2992347) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 mce: CPU supports 6 MCE banks CPU3: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (23938.21 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-3 level CPU groups: 0-1 2-3 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-3 level CPU groups: 0-1 2-3 CPU2 attaching sched-domain: domain 0: span 2-3 level MC groups: 2 3 domain 1: span 0-3 level CPU groups: 2-3 0-1 CPU3 attaching sched-domain: domain 0: span 2-3 level MC groups: 3 2 domain 1: span 0-3 level CPU groups: 2-3 0-1 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 17:26:45 Date: 01/26/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f] pci 0000:00:03.3: reg 14 32bit mmio: [0xfebd8000-0xfebd8fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xfebe0000-0xfebfffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfebd9000-0xfebd9fff] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebda000-0xfebda3ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebdc000-0xfebdffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebdb000-0xfebdb0ff] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff] pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfea00000-0xfea1ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) xenbus_probe_backend_init bus registered ok SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config IOMMU 0xfedc3000: using Register based invalidation IOMMU 0xfedc1000: using Register based invalidation IOMMU 0xfedc4000: using Register based invalidation IOMMU: identity mapping for device 0000:01:00.0 IOMMU: Setting RMRR: IOMMU: Setting identity map for device 0000:00:1d.0 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1d.1 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1d.2 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1d.7 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1a.0 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1a.1 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1a.2 [0xbfe58000 - 0xbfe70000] IOMMU: Setting identity map for device 0000:00:1a.7 [0xbfe58000 - 0xbfe70000] IOMMU: Prepare 0-16MiB unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000] alloc irq_desc for 29 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 30 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 31 on node 0 alloc kstat_irqs on node 0 PCI-DMA: Intel(R) Virtualization Technology for Directed I/O Multi-level page-table translation for DMAR. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI hpet: hpet4 irq 26 for MSI hpet: hpet5 irq 27 for MSI Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x800-0x85f has been reserved system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:01: ioport range 0x860-0x8ff has been reserved work_for_cpu used greatest stack depth: 6400 bytes left pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xd000-0xdfff pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff] pci_bus 0000:03: resource 1 mem: [0xfe700000-0xfe7fffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3700k freed Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1264526807.170:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 15634 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5712 bytes left cryptomgr_test used greatest stack depth: 5392 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:01.0: irq 32 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 33 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.0: irq 33 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 34 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.1: irq 34 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [VBTN] Monitor-Mwait will be used to enter C-1 state processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A work_for_cpu used greatest stack depth: 5008 bytes left brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:1f.2: version 3.0 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 alloc irq_desc for 35 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:1f.2: irq 35 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 35 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 35 ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 35 ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 35 work_for_cpu used greatest stack depth: 4528 bytes left Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebda000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.6-pvops-dom0 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected work_for_cpu used greatest stack depth: 3888 bytes left alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.6-pvops-dom0 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 10:101:442 rtc_cmos 00:05: setting system clock to 2010-01-26 17:26:49 UTC (1264526809) Initalizing network drop monitor service ata3: SATA link down (SStatus 4 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD12, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: ATA-8: ST3320418AS, CC44, max UDMA/133 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3320418AS CC44 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD12 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 3204k freed Write protecting the kernel read-only data: 7512k [drm] Initialized drm 1.1.0 20060810 [drm] radeon default to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm:radeon_driver_load_kms] *ERROR* Failed to initialize radeon, disabling IOCTL radeon 0000:01:00.0: PCI INT A disabled radeon: probe of 0000:01:00.0 failed with error -22 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. async/0 used greatest stack depth: 3856 bytes left SELinux: 8192 avtab hash slots, 130190 rules. SELinux: 8192 avtab hash slots, 130190 rules. SELinux: 8 users, 12 roles, 2770 types, 129 bools, 1 sens, 1024 cats SELinux: 74 classes, 130190 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1264526811.598:2): policy loaded auid=4294967295 ses=4294967295 sh used greatest stack depth: 3384 bytes left cat used greatest stack depth: 3128 bytes left mount used greatest stack depth: 3000 bytes left udev: starting version 141 ACPI: WMI: Mapper loaded input: PC Speaker as /devices/platform/pcspkr/input/input3 pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled iTCO_vendor_support: vendor-support=0 parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 36 on node 0 alloc kstat_irqs on node 0 e1000e 0000:00:19.0: irq 36 for MSI/MSI-X dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:19:32:41:20 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected ppdev: user-space parallel port driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 device-mapper: multipath: version 1.1.0 loaded EXT3 FS on dm-0, internal journal mount used greatest stack depth: 2920 bytes left kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 9437176k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:9437176k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts